DBrand skin feedback - Google Pixel 2 XL Questions & Answers

Hi everybody,
Today I'm loocking for a dbrand skin for Pixel 2xl Panda.
I would like to protect him with panda skin from Dbrand and i'm loocking for some feedback about the durability of this skin and eventually some tips for a clear case to show it

Le_Combattant said:
Hi everybody,
Today I'm loocking for a dbrand skin for Pixel 2xl Panda.
I would like to protect him with panda skin from Dbrand and i'm loocking for some feedback about the durability of this skin and eventually some tips for a clear case to show it
Click to expand...
Click to collapse
It's good stuff, I had it on my moto z. As far as clear cases, the spigen liquid crystal is what I have on my panda right now. It's good but it discolored after a while.

Edmontonchef said:
It's good stuff, I had it on my moto z. As far as clear cases, the spigen liquid crystal is what I have on my panda right now. It's good but it discolored after a while.
Click to expand...
Click to collapse
Yeah I read that TPU turn yellow after week/months.
So I would like a bumper (maybe rhino) but I want a protection to cover the back of the Pixel 2xl. It's a very sensitive material.

I've been rockin a dbrand skin & grip since dbrand released them.... got sucked in from all the advertising on LTT. But I've gotta say they're both great & worth the price! Well, sorta...
So the original grip case you had to order off indiegogo, I don't think it's available any more. But after a little more than a year of use the harden plastic around the rubberized power button has broken. The case is still functional and held together but the rubberized button. The hard rubberized corners and grip have worn soft and rounded. Yes, I use my phone a lot especially the double press power for the camera. It was expensive for a bumper type case, but was worth it IMO. I've dropped this phone more times than I'd care to admit and not a mark on it, even landing screen first. I'm happy with the year and a bit I've gotten from this case and would order another.
The grip case came with a back skin, I had to RMA my original 2 XL because of a camera issue and ordered a replacement skin while it was in for RMA. When you order the back skin they actually send you two skins. One is just the back and ends at the "edge". The second will wrap around the sides. I had ordered a matching front skin as well. The skin can be challenging to line up and apply, but you can peel it off and reapply if its not 100%. I may just have sucked at applying the wrap around skin, but I couldn't get the seams to line up perfectly, no matter how hard I tried (had the same problem with the skin for my iPad mini 4) . Since I had the grip case, I just applied the back only skin and have been happy with that. As for the front skin, I think because of the slight curve to the screen it never adhered properly, even after a bit of heat with a hairdryer to get it to take the shape, and eventually peeled off. There also isn't much material, so not worth it IMO.
I'd definitely buy their cases again but would only get the back skins.

Related

Help me choose a SGS2 case+protector

Hi guys,
When I look at the forum, it's like advertisements of new products which doesn't tell me a lot. So can you please recommend me:
A case that:
doesn't require me to open some part to access the screen
protects the phone well against drops
is comfortable to hold and touch (my fingers won't get itchy etc.)
And a screen protector that:
protects without distorting the image quality and responsiveness of the screen
doesn't leave bubbles inside (I hate the bubbles) or fingerprints outside
is a little slippery so it won't be a hard job for me to move fingers on the screen
THANKS IN ADVANCE FELLAS!
There is a hybrid case, just search hybrid case sgs2 in amazon,
I'm perfectly happy with that.
Downsides:
- not so slim anymore
- more weight
But my phone feels safe
And I'd suggest the Mumbi-screen protectors,
but you'll still some have fingerprints.
But once applied right (not easy btw )
they fit perfectly
Muta
you can look at the case-mate tough or the otterbox commuter, they both rock.
i bought the case-mate a few days ago, waiting untill it arrives
I also recommend the cases that other posters have, for a screen protector look no further than this.
http://www.amazon.com/SGP-Samsung-Galaxy-Protector-Oleophobic/dp/B0056C3JT6
Ive just recieved a Zenus Air Jacket looks sleek and smart, they do a range of colours, and it comes with a screen protector too, although i tried to fit mine and some dust came out of nowhere and went onto my screen so i had to bin it , hopefully the gorilla glass will protect instead
http://www.mobilefun.co.uk/zenus-skin-air-jacket-series-for-samsung-galaxy-s2-i9100-white-p29786.htm
I have a transparent Casemate Barely There.
It's a bit rigid but I think is the thinnest case on sale.
The transparent one gives to the phone a nice shiny look.
Suggested
I bought a hardcase, but i had the problem with the echo voice !
i heard my own voice twice !
is the problem fixed now?
In my personal opinion i like otterbox for SGS2, fits well, it has a metal cover for back side and plastic covers for usb port and earphones, i have one.
Enviado desde mi Samsung Galaxy S II
perso
Personally, I bought a pack screen protector + white case on ebay.
You can search on ebay :
LOT 7en1 Housse Etui Coque Rigide/FILMS Protecteur Pour Samsung Galaxy S2 i9100
sold by citephone
I just tried different case.
I prefer hard cover.
I try
1) Phoenix tough case: i broke upper corner, rubber come out after a bit of time
Vote: 3/10
Price around 15€
2) Samsung Original Mesh Vent case: Too sensitive and since have hole the dust come in and leave and put it many times to clean i broke the upper corner. In any case it offer a very low protection
Vote 5.5/10
Price around 18€
3)Tpu soft cover gel from ebay: it is not so soft but offer a better protection than other but for it's material attire too many dust on the border. It offer a good grip
Price 5€
Vote 6.5/10 (for now)
At end i buy also Case-Mate Tough that have 2 layer protection but it has not arrived.
Arrived
Perfect case optimal protection and grip. 2 thing. Inside silicon collect dust and dont put while phone is on because it press power button to reboot
Incipio NGP case. Martin Fields screen protector.
A lot of people are recommending products that does not stand out. I prefer to make my phone special so it stands out when I take it out. I like sleek , high tech looking things and thats what this setup is about:
I am currently using metal black battery cover:
http://forum.xda-developers.com/showthread.php?t=1263780
with real aluminum black phone case: (see akiba slider or SZLF slider)
http://forum.xda-developers.com/showthread.php?t=1263780
(SZLF or china made version on ebay for $30, search i9100 metal case)
with ultra optics
http://forum.xda-developers.com/showthread.php?t=1263780
result is a Sleek phone with a premium metal feel to it. The ultra optics cancels out fingerprints while maintaining good optical clarity. (you may need to clean it still every 1 week or so like any protector)
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
1xinfusion said:
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
Click to expand...
Click to collapse
I got the Incipio NGP case as well and it is pretty sweet--has a great feel and is thin, although the back is a little bit too smooth but I still like it.
That is a good idea on the housing. I might try a white housing.
What is your opinion on a screen protector? I don't like how it adds a layer and changes the feel--and besides, the SGS2 has gorilla glass.

Looking for textured back skin / shield

New owner here:
Read the reviews and knew the glass back isn't exactly a problem but I would prefer something more textured like some other phones - even faux leather even.
I'm currently using the adhesive back that came with my phone and it's not bad but wondering what else other owners are using.
Thank you.
You can find a plenty of "Carbon Fiber" skins around. I had one on my previous phone and made it feel really good.
Alternatively, check this site out: https://dbrand.com/shop/xperia-z3-compact
The page speaks for itself, but there's leather. I can't tell you how the site is because I've never bought from them, and I can't say if the leather is real or not. You'll have to look around to see other people's opinions on that.
Gave you a stepping stone at least.
Bought from them twice.
Shipping is very slow since you pay less than 2$ of shipping fee.
As said, the cut is really precise, and repositionnnable if necessary.
I have the "carbon" one and it looks great. Almost like real carbon fiber.
It's textured and resistant to scratch. Don't expect the phone to be less slippery however.
Bought the metal skin for my Ps4 and it looks great on the console, not on the controller.
Looks like real brushed aluminum.
Recommended
Slickwraps
Slickwraps has skin for front, back and sides for a complete skinned look. Got black leather on white.
avinandaspid said:
Slickwraps has skin for front, back and sides for a complete skinned look. Got black leather on white.
Click to expand...
Click to collapse
What about the texture?
And is it possible to use a tempered glass screen protector with the front skin?
I am also looking for a away to make the phone less slippery without a case (I have tried several cases, they all suck more or less).
Never again shall I buy a phone this slippery, it really is annoying how it handles with one hand.
Glass is less slippery if you have sweaty hands. Your fingers , long or short, rest on the side of the phone which is plastic, the skin does help on that area.
If you want real leather, check COLORS
Yes you can use tempered, but tempered has to be placed before the skin.
I'm giving dbrand a try. I've always used slickwraps but I don't see the point of paying for an entire skin and not using it.
Dbrand has sale today also. 25% off!

Wraps for the OnePlus 2

Hey guys!
Who will be getting some?!
As of this moment there is only Slickwraps that have the skins for OnePlus 2.
Link: https://slickwraps.com/devices/phones/android/oneplus-2.html
I will add the link to Dbrand as soon there will be OnePlus 2 skins available.
So what will you be getting?!
I've had only Dbrand skins on my phones, so far! They are very precise and high quality. But I am probably going with the Slickwraps for this phone, because Dbrand never includes the side wraps, and I want to protect the frame of the phone!
So what are your thoughts on this?
And please share the photos, if and when you'll have it!
Cheers
I'm getting a sample from them in the mail any day now, I can try to make some decent pictures if you'd like.
Yes, please do! I am always looking for the best option to protect my investments, I've had Diztronic TPU and Orzly tempered glass on my OnePlus One, but I've got so much dust on the edges that I've ended up scratching my screen..
So this time around I am planing to buy wraps for the back, camera and the sides and put my phone in a pouch, as I do not drop my phone, but I am highly sensitive about scratches..
If anyone is interested in a pouch I will buy it from here: https://www.etsy.com/shop/Begoos This are very high quality made pouches!
Just ordered the gun metal slick wrap. I wonder how well it will stay on the sandstone back?
rayandreas said:
Just ordered the gun metal slick wrap. I wonder how well it will stay on the sandstone back?
Click to expand...
Click to collapse
I think its similar to the OPO back, so it should stay on pretty good. I am not planing to cover the back thou. I am interested to wrap the sides.. As the back is easy to exchange, and I don't want to damage the metal.. I would probably go with the Dbrand, if I would cover the back only. And that's only because I've had absolutely no problems with any of my skins from them, also the shipping was very fast!
I hope to see some pics, when you get it!

add grip without a case

anyone recommend a skin or any way to add grip to the axon7 without using a case? hate cases and find the phone abit slippery. was thinking about the xtremeguard back skin since the protectors tend to be a little sticky front and back. any other recommendations?
I'm waiting for the dbrand skin to ship. If I can get the phone to be a little less slippery, I'm dropping the case. Will let you know once I tested it.
I'm currently using a DBrand Carbon Fiber skin. It's ok. Not super grippy tbh. I didn't find the phone to be super slippery to me anyway, but it's not like the skin adds a ton.
yeah i heard the matte dbrand has a little more grip to it but I love the grey on this phone so I'm hoping a clear skin will add some grip to it without hiding its color.
Just sandpaper it
I just installed the carbon fibre dbrand skin, and I can tell you that it adds grip, a lot.
I'll still use the case for the gym, but for everything else, you can use it naked.
I use glock tape https://www.amazon.com/GT-5000-stri...TF8&qid=1492003873&sr=8-1&keywords=glock+tape
alamoaz1 said:
I use glock tape https://www.amazon.com/GT-5000-stri...TF8&qid=1492003873&sr=8-1&keywords=glock+tape
Click to expand...
Click to collapse
I'd like to see a picture of that!
Since the red iPhone came out and people seemed to go gaga over it, I put this red Dbrand skin on my Axon 7. It does add a "little" grip but not enough for me to feel comfortable with it at work. This is the red with black front skin. And a pic with the case on that came with the A7...
This shows that the Axon 7 is much better looking than the iPhone ?
alamoaz1 said:
I use glock tape https://www.amazon.com/GT-5000-stri...TF8&qid=1492003873&sr=8-1&keywords=glock+tape
Click to expand...
Click to collapse
yeah, please post pics if possible. how does it stick? the glue strong? does it peel on the corners and edges after awhile with normal use?
droidnew said:
Since the red iPhone came out and people seemed to go gaga over it, I put this red Dbrand skin on my Axon 7. It does add a "little" grip but not enough for me to feel comfortable with it at work. This is the red with black front skin. And a pic with the case on that came with the A7...
This shows that the Axon 7 is much better looking than the iPhone
Click to expand...
Click to collapse
I've tried the matte dbrand and it does add a "little" grip like you said but not enough for me. plus after using it for awhile it started to unglue on the edges especially on the sides if the phone is curved like the Axon7. I ordered a couple of cheap thin cases from aliexpress so i might have to give a case a try but after hearing about this gt-5000 gun grip tape, i may give that a try first.
killerb777 said:
yeah, please post pics if possible. how does it stick? the glue strong? does it peel on the corners and edges after a while with normal use?
Click to expand...
Click to collapse
These are pics of my bricked s6, but you can see after about 6 months, JUST on the edges, one side peeled, other side had a chip that came off clean. I change it every 6 months or so. Comes off super clean, sticks GREAT IMO. But there is a possibility it may screw with Bluetooth. Not sure but the s6 would cut out every once in a while with my headphones. With 2 different brand sets of headphones, I have had issues with both phones. My head unit in my car has only cut out on me using the axon 7. Next time I change it I planned on testing.

Recommendations for a Slim, Soft-Touch TPU Case?

I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.
Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!
joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get
Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.
joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:
RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.
If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.
https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .

Categories

Resources