Related
Guys, I need some help to confirm the only solution I found for my problem, or if I can still try other solutions.
I bought a Mi5s that already came from seller with the global stable rom. I asked the official bootloader unlock to Xiaomi and has received authorization by SMS. But the unlock application stucks at 50% saying that the device being unlocked is different from the one authorized on Mi account. I looked for some solutions like deleting all the devices in the page i.mi.com, leaving only the Mi5s, but I did not have success. Other solution is flash chinese developer rom
Another solution is to flash Chinese developer rom, to confirm unlock of the device on the developer screen and then to use the official tool unlock. But I didn't find any way to flash the developer rom. I've tried using Chinese PC Suite, fastboot mode, MiFlash, and all says that the rom I am trying to flash (Chinese) is different from the rom of the device (global).
The only solution I found is to buy a deep flash cable and flash the developer rom in EDL mode. Or hope to launch the global developer rom for Mi5s, which so far we have no prospect in the short term.
Do you suggest I try some other solution? Thanks in advance.
Try logging into mi cloud with your mi5s using the same account you used to asked the request to unlock.
gnazio said:
Try logging into mi cloud with your mi5s using the same account you used to asked the request to unlock.
Click to expand...
Click to collapse
Already had done it, no success
From http://en.miui.com/thread-482266-1-1.html
Under settings/additional settings/developer options, click Mi unlock status. Click add account and device. Your device will now be automatically added to your Mi account.
Next,enable OEM unlocking and USB debugging under developer options.
Then connect your mobile to the pc or laptop while on fastboot mode. Unlock again. This time, it will be successful!
Same problem. Can't unlock my Mi 5S on Global Stable firmware (V8.0.3.0). And can't flash to China Developer firmware.
---------- Post added at 12:12 AM ---------- Previous post was at 12:11 AM ----------
BPSoft said:
Under settings/additional settings/developer options, click Mi unlock status. !
Click to expand...
Click to collapse
On Global Stable 8.0.3.0 there is no Mi unlock status in Developer settings
zzzit said:
On Global Stable 8.0.3.0 there is no Mi unlock status in Developer settings
Click to expand...
Click to collapse
Go to "About Phone" and tap "MIUI Version" multiple times to unlock it.
BPSoft said:
Go to "About Phone" and tap "MIUI Version" multiple times to unlock it.
Click to expand...
Click to collapse
I already did it lol
Global Stable firmware doesn't have any Mi Unlock status parameter on Developer Settings.
zzzit said:
I already did it lol
Global Stable firmware doesn't have any Mi Unlock status parameter on Developer Settings.
Click to expand...
Click to collapse
Sorry i was on mobile and understood you badly.
According to this:
http://en.miui.com/thread-202290-1-1.html
You should have that parameter no matter you are at global or not, but if you don't you should flash a developer version, instruction at the same page.
Before you say "i can't flash developer rom", did you tried the updater app to flash it?
Force flash your rom using special cable to enter fastboot to install. I dont know its detail, but the installation called Deep Flash using deep flash cable sold on ebay
alediniz said:
Guys, I need some help to confirm the only solution I found for my problem, or if I can still try other solutions.
I bought a Mi5s that already came from seller with the global stable rom. I asked the official bootloader unlock to Xiaomi and has received authorization by SMS. But the unlock application stucks at 50% saying that the device being unlocked is different from the one authorized on Mi account. I looked for some solutions like deleting all the devices in the page i.mi.com, leaving only the Mi5s, but I did not have success. Other solution is flash chinese developer rom
Another solution is to flash Chinese developer rom, to confirm unlock of the device on the developer screen and then to use the official tool unlock. But I didn't find any way to flash the developer rom. I've tried using Chinese PC Suite, fastboot mode, MiFlash, and all says that the rom I am trying to flash (Chinese) is different from the rom of the device (global).
The only solution I found is to buy a deep flash cable and flash the developer rom in EDL mode. Or hope to launch the global developer rom for Mi5s, which so far we have no prospect in the short term.
Do you suggest I try some other solution? Thanks in advance.
Click to expand...
Click to collapse
I had similar problems and I was also trying to figure out what to do to unlock bootloader on Global stable rom. The amount of people having the same problem where unlocking app stops at 50% is overwhelming ,judging from the comments found on google, but the info what is the actual problem is next to none. Suggested solutions looks to me like voodoo and most if not all probably doesn't have any impact on successful unlocking. As the Xiaomi unlock app is just a wrapper for fastboot executable I've checked what kind of commands are being send to the fastboot when you click unlock here they are.
fastboot getvar product
fastboot getvar soc-id
fastboot getvar soc_id
fastboot getvar board_version
So I've checked if I will actually get any info from bootloader if I send those commands manually, and with no surprise I didn't get any. So this was the problem at least in my case. Some kind of connection problem I'm not sure where exactly the fault is, probably drivers but try to issue those commands manually from command line I can bet you will not get any info from the phone. What to do if that's the case remove and reinstall drivers, this is what has worked for me. Good luck
Had the same problem. Got it solved today. the bad news you need a deep flashing cable, good news you can make it yourself.
Here is the guide:
http ://en.miui.com/thread-310325-1-1.html
http ://en.miui.com/thread-299790-1-1.html
I have unlocked 4 mi phones with no difficulty. Some of them with fake/seller ROM. Once you got permission make sure you have done all things right before preceding to Unlock. Usually it's all about loading the right driver for Xiaomi phone. Using default windows driver is not working. As it's not Microsoft signed driver you have to start windows in insecure mode.
You have to login in your mi account both on PC and on phone with SIM card ind.
Check that phone is verified settings/mi account on your phone.
Best luck
Something is with drivers for your phone. I have the same problem...than i delete drivers and than they automaticly reinstall and evarything works.
ka3yal said:
Had the same problem. Got it solved today. the bad news you need a deep flashing cable, good news you can make it yourself.
Here is the guide:
http ://en.miui.com/thread-310325-1-1.html
http ://en.miui.com/thread-299790-1-1.html
Click to expand...
Click to collapse
Hi, what exactly did you do to succeed? Thanks.
I am stuck on Mi5s with 8.0.3.0. global stable ROM and the unlock blocks on 50%.
ka3yal said:
Had the same problem. Got it solved today. the bad news you need a deep flashing cable, good news you can make it yourself.
Here is the guide:
http ://en.miui.com/thread-310325-1-1.html
http ://en.miui.com/thread-299790-1-1.html
Click to expand...
Click to collapse
It worked for me!
Need a lot of patience
Mois1234 said:
Hi, what exactly did you do to succeed? Thanks.
I am stuck on Mi5s with 8.0.3.0. global stable ROM and the unlock blocks on 50%.
Click to expand...
Click to collapse
Follow the guide that I posted to make the cable(first link), install all the drivers and software needed (second link).
After successfully putting the phone in deep flash mode you need to update Qualcomm drivers (under device manager it must appear as com3 or com10 port after that).
Then use Mi Flash tool to flash Chinese dev rom (http ://bigota.d.miui.com/7.1.20/miui_MI5S_7.1.20_229fa68558_6.0.zip). If the flash fails the first time reboot the computer and try again.
After that sync connect your MI account to the device, enter Dev mode and you will find OEM Unlock option.
Not easy but it works.
Good Luck!
shamus said:
I had similar problems and I was also trying to figure out what to do to unlock bootloader on Global stable rom. The amount of people having the same problem where unlocking app stops at 50% is overwhelming ,judging from the comments found on google, but the info what is the actual problem is next to none. Suggested solutions looks to me like voodoo and most if not all probably doesn't have any impact on successful unlocking. As the Xiaomi unlock app is just a wrapper for fastboot executable I've checked what kind of commands are being send to the fastboot when you click unlock here they are.
fastboot getvar product
fastboot getvar soc-id
fastboot getvar soc_id
fastboot getvar board_version
So I've checked if I will actually get any info from bootloader if I send those commands manually, and with no surprise I didn't get any. So this was the problem at least in my case. Some kind of connection problem I'm not sure where exactly the fault is, probably drivers but try to issue those commands manually from command line I can bet you will not get any info from the phone. What to do if that's the case remove and reinstall drivers, this is what has worked for me. Good luck
Click to expand...
Click to collapse
zmajdk said:
I have unlocked 4 mi phones with no difficulty. Some of them with fake/seller ROM. Once you got permission make sure you have done all things right before preceding to Unlock. Usually it's all about loading the right driver for Xiaomi phone. Using default windows driver is not working. As it's not Microsoft signed driver you have to start windows in insecure mode.
You have to login in your mi account both on PC and on phone with SIM card ind.
Check that phone is verified settings/mi account on your phone.
Best luck
Click to expand...
Click to collapse
mmicoo said:
Something is with drivers for your phone. I have the same problem...than i delete drivers and than they automaticly reinstall and evarything works.
Click to expand...
Click to collapse
ka3yal said:
Follow the guide that I posted to make the cable(first link), install all the drivers and software needed (second link).
After successfully putting the phone in deep flash mode you need to update Qualcomm drivers (under device manager it must appear as com3 or com10 port after that).
Then use Mi Flash tool to flash Chinese dev rom (http ://bigota.d.miui.com/7.1.20/miui_MI5S_7.1.20_229fa68558_6.0.zip). If the flash fails the first time reboot the computer and try again.
After that sync connect your MI account to the device, enter Dev mode and you will find OEM Unlock option.
Not easy but it works.
Good Luck!
Click to expand...
Click to collapse
I tried all the possibilities described, that do not need flash developer rom using a deep flash cable. I changed drivers and everything, no success.
In time, I already ordered a deep flash cable here in Brazil. For my part, I thank all fellas who tried to help me but gave up trying anything else. As the title of the topic, my device is currently virtually impossible to unlock in the normal way.
Mois1234 said:
Hi, what exactly did you do to succeed? Thanks.
I am stuck on Mi5s with 8.0.3.0. global stable ROM and the unlock blocks on 50%.
Click to expand...
Click to collapse
I have same problem to unlock Mi5s before but then realize that you need to update driver on your PC from Keadcom (or samething) into Marshall London Bootloader and it success.
Now my Mi5s uncloked officially.
I just use same Mi account which has permission to unlock my previous device which is Mi5.
No need deep flash cable, just normal cable can do.
Hope this help.
deksudi said:
I have same problem to unlock Mi5s before but then realize that you need to update driver on your PC from Keadcom (or samething) into Marshall London Bootloader and it success.
Now my Mi5s uncloked officially.
I just use same Mi account which has permission to unlock my previous device which is Mi5.
No need deep flash cable, just normal cable can do.
Hope this help.
Click to expand...
Click to collapse
Thanks you very much!
Unfortunately this this did not help. My assumption is that 8.0.3.0. Global stable needs ROM-internal permissions, which are currently missing. (In fastboot mode ADB is able to communicate to the phone, so it is not a driver issue.)
Unlocking bootloader
Mois1234 said:
Thanks you very much!
Unfortunately this this did not help. My assumption is that 8.0.3.0. Global stable needs ROM-internal permissions, which are currently missing. (In fastboot mode ADB is able to communicate to the phone, so it is not a driver issue.)
Click to expand...
Click to collapse
No it doesn't mean it will work with Mi Unlock tool. It is some time ago I have guided one on this forum trough procedure and he succeeded at least. Read his experience: https://forum.xda-developers.com/re...king-beast-t3416088/post67695482#post67695482
Hi,
I bought Xiaomi Mi 5s with Global Stable ROM 8.2.1.0, and today I entered the official MIUI website to see what's the latest version that is released, in here:
http://en.miui.com/download-314.html
For some reason at the same moment I thought that 8.0.3.0 is higher version than mine (I missed a zero), and I downloaded the ROM installation file to the phone, and installed it through the updater app.
After the install, the phone loaded and didn't recognize the SIM card anymore, also couldn't enter the Network settings, the phone app or the phone status, and from what I read on the internet it probably don't recognize my IMEI anymore...
It also doesn't let me install my previous version (8.2.1.0) because the updater says it's not verified.
I tried to flash again the same ROM that is installed now (8.0.3.0), but it didn't help.
Also tried to do factory reset but I can't because it doesn't recognize the device id...
Is there something I can do immediately to fix this without applying a request to Xiaomi to unlock the bootloader (which I really don't want to do), and also to be stuck without a phone again for a couple of days?
Updater says it's not verified when you install 8.2.1.0? Maybe you got a wrong phone version?
zew384 said:
Updater says it's not verified when you install 8.2.1.0? Maybe you got a wrong phone version?
Click to expand...
Click to collapse
Nope, it's the right one: http://en.miui.com/thread-567657-1-1.html
From what I read over the internet they canceled this update because it has issues, battery drain mostly, but nothing official that I saw.
I'm not sure,but according to a tutorial I found, which is about down grade from miui 8 to 7. You need to have a factory reset to have imei back
By the way, Mi 5s always comes with Chinese ROM, so maybe you have recovery installed already, where u can flash without verify.
forgivemypoorEN said:
I'm not sure,but according to a tutorial I found, which is about down grade from miui 8 to 7. You need to have a factory reset to have imei back
By the way, Mi 5s always comes with Chinese ROM, so maybe you have recovery installed already, where u can flash without verify.
Click to expand...
Click to collapse
No I don't have recovery, probably when it arrives to the stores here they flash official ROM and remove custom recovery (just guessing).
I see I can't avoid unlocking the device, although I don't want to. In my case I down graded from 8.2.1.0 to 8.0.3.0, but I hope that a factory reset will also help after I'll unlock the device.
forgivemypoorEN said:
I'm not sure,but according to a tutorial I found, which is about down grade from miui 8 to 7. You need to have a factory reset to have imei back
By the way, Mi 5s always comes with Chinese ROM, so maybe you have recovery installed already, where u can flash without verify.
Click to expand...
Click to collapse
Wow, bull****, mine came with Global rom, and in xiaomi phones after ~2016 there is like ~1% chance that they will came with recovery and unlocked bootloader
to op:
unlock bootloader (developer settings + miunlock tool) and then use miflash to reflash rom
ariel.levin said:
No I don't have recovery, probably when it arrives to the stores here they flash official ROM and remove custom recovery (just guessing).
I see I can't avoid unlocking the device, although I don't want to. In my case I down graded from 8.2.1.0 to 8.0.3.0, but I hope that a factory reset will also help after I'll unlock the device.
Click to expand...
Click to collapse
I had exactly the same problem as you last month. All i can do is flashing my phone using deep flash cable. Factory reset does solve this problem, but in my case i cant. When hit reset on settings, i must input mi account password and it did nothing after that. I also cant unlock my phone because i forgot binding my device to mi account in developer settings when still in miui 8.2.1.0.
mezutelni said:
Wow, bull****, mine came with Global rom, and in xiaomi phones after ~2016 there is like ~1% chance that they will came with recovery and unlocked bootloader
to op:
unlock bootloader (developer settings + miunlock tool) and then use miflash to reflash rom
Click to expand...
Click to collapse
Sorry, I didn't know they are selling Mi 5s global versions. I thought Mi 5s was only sold in China. I did google it online and it was not sold elsewhere and there was no global rom then.
Update for people who will encounter this issue and will read this:
What solved it in my case, was to send Xiaomi a request to unlock the device, they returned an answer pretty fast (2 hours later), maybe because I wrote them what happened in the request. I unlocked the device using Mi Unlock tool, downloaded a fastboot version of the global ROM I wanted (8.0.3.0) from the official MIUI website, and flashed it using Mi Flash tool, choosing the option "clean all, flash and unlock". After the flashing succeeded, the IMEI was restored and everything is ok, and also the bootloader is locked again like nothing happened.
pretty much what "mezutelni" said to do
How can I flash MIUI 9 Official Full ROM without unlocking the bootloader?
I pressed the ”OEM Unlocking” without unlocking the bootloader. I didn't even enter the approved account in "Mi unlock status". Now the status is unlocked. The bootloader is actually still locked. When I use PC to unlock bootloader, it goes until 99% and gives me the error "Current account is not bound to this device". I tried resetting the phone from settings (wipe data partition) but the status is still unlocked.
The question is how can I undo the status to locked so that I can continue unlocking this device and enter the approved account to "Mi unlock status"?
Growtopia Jaw said:
How can I flash MIUI 9 Official Full ROM without unlocking the bootloader?
I pressed the ”OEM Unlocking” without unlocking the bootloader. I didn't even enter the approved account in "Mi unlock status". Now the status is unlocked. The bootloader is actually still locked. When I use PC to unlock bootloader, it goes until 99% and gives me the error "Current account is not bound to this device". I tried resetting the phone from settings (wipe data partition) but the status is still unlocked.
The question is how can I undo the status to locked so that I can continue unlocking this device and enter the approved account to "Mi unlock status"?
Click to expand...
Click to collapse
Apply for permission, wait to receive confirmation, sign into account on phone and on Mi unlock tool. Bit too Fastboot mode, on Mi-unlock tool it gets to 99% and then should give you a message to wait 360 hours. This is correct, it will work after the amount of time (about 2 weeks).
Thanks,
But this problem got even worse. I updated to MIUI 9.5 from MIUI 9.1. The update failed. It is not possible to boot into Android either. I even tried formating data. The bootloader is locked. I applied permission and already received it.
I bought the phone via China Mobile.
I suspect that my ROM may be a fake one. But it looks totaly original.
1. 4 digit version code
2. NCKMIEI --> Official and correct MIUI 9.1 version
3. Gapps preinstalled
4. No bloatware
5. Everything looks the same like the original ROM
6. Even Mi Remote is working
What I'm thinking about now is how is the Mi status "Unlocked" even I didn't even enter the approved Mi account used to unlock the bootloader.
I know the bootloader is really "locked" because
[email protected]> fastboot oem device-info
Locked
-----------------------------------------------------------------------------
I'm currently trying to flash CN MIUI ROM through EDL mode (test point) because Global ROM failed. Then try to unlock bootloader from CN MIUI ROM and re-flash Global ROM through MiFlash
Okay, so the phone runs fine now. The phone now runs CN MIUI 9 9.5.3.0 stable version. I am still waiting for the 360 hours (15 days) man!!! for the bootloader unlocking. I applied for the unlocking. Will update when I successfully return to Global Stable ROM.
I flashed CN MIUI 9 ROM via test point. When it reboots, it will show you the error you've encountered before. Relax! Just reboot and wait for about 15 minutes and your phone is alive again.
Thanks Xiaomi for the INCREDIBLY TIGHT SECURITY ???
Growtopia Jaw said:
Okay, so the phone runs fine now. The phone now runs CN MIUI 9 9.5.3.0 stable version. I am still waiting for the 360 hours (15 days) man!!! for the bootloader unlocking. I applied for the unlocking. Will update when I successfully return to Global Stable ROM.
I flashed CN MIUI 9 ROM via test point. When it reboots, it will show you the error you've encountered before. Relax! Just reboot and wait for about 15 minutes and your phone is alive again.
Thanks Xiaomi for the INCREDIBLY TIGHT SECURITY ???
Click to expand...
Click to collapse
Bro can you explain EDL method.?
Currently i am also not able to unlock BL.
(Error :- current Account Couldn't Unlock This Device)
If i flash china rom via edl , Will i able to unlock bootloader.?
Current Rom :- miui global 9.5 | stable 9.5.10.0(NCAMIFA)
ash_pipaliya said:
Bro can you explain EDL method.?
Currently i am also not able to unlock BL.
(Error :- current Account Couldn't Unlock This Device)
If i flash china rom via edl , Will i able to unlock bootloader.?
Current Rom :- miui global 9.5 | stable 9.5.10.0(NCAMIFA)
Click to expand...
Click to collapse
There is some risk you have to take in order to flash via EDL (test point) mode.
1. You have to backup all of your data. When you flash via EDL mode, your phone will return to "stock" like when you first buy the phone.
2. Flashing via EDL mode will involve removing the phone's back cover. You have to do this if you really want to flash via EDL mode.
Growtopia Jaw said:
There is some risk you have to take in order to flash via EDL (test point) mode.
1. You have to backup all of your data. When you flash via EDL mode, your phone will return to "stock" like when you first buy the phone.
2. Flashing via EDL mode will involve removing the phone's back cover. You have to do this if you really want to flash via EDL mode.
Click to expand...
Click to collapse
I tried open back panel, i am going to flash china developer rom using edl. Hope i can unlock BL on chinese rom.
And can i flash china developer rom using fastboot..? With locked BL..?
ash_pipaliya said:
I tried open back panel, i am going to flash china developer rom using edl. Hope i can unlock BL on chinese rom.
And can i flash china developer rom using fastboot..? With locked BL..?
Click to expand...
Click to collapse
Yes. You can unlock bootloader after flashing with EDL mode.
Only use China ROM if you bought your phone from China. If your phone is International phone / not bought from China, I advice you to flash Global ROM first. If it doesn't work, then try China ROM.
Growtopia Jaw said:
Only use China ROM if you bought your phone from China. If your phone is International phone / not bought from China, I advice you to flash Global ROM first. If it doesn't work, then try China ROM.
Click to expand...
Click to collapse
I am already on global rom but unable to unlock Bootloader. I am trying from 8 days
ash_pipaliya said:
I am already on global rom but unable to unlock Bootloader. I am trying from 8 days
Click to expand...
Click to collapse
Have you tried a different account? Try registering a new account and don't change anything. Then apply unlock bootloader permission at https://en.miui.com/unlock/. After applying for permission, enter your account details in Mi Unlock Status.
If you have a PC, download Mi Unlock Tool here: http://miuirom.xiaomi.com/rom/u265827351/2.3.803.10/miflash_unlock-en-2.3.803.10.zip
Open Mi Unlock Tool by clicking miflash_unlock.exe.
Enter your login details and reboot your phone to fastboot mode.
Plug in your phone.
Press unlock.
If successful, you will see a message with "After 360 hours of trying to unlock device"
This is normal.
You need to wait for 15 days to try to unlock the bootloader.
There is no quicker way to overcome this. I also waited for 15 days. Also please don't keep pressing unlock in your PC when the 15 days is not over. It will block your device and you can't unlock again.
If you need some personal assistance, private message me and I will give you my Facebook / Messenger ID.
Hello guys.
I recently bought this phone and wanted to use netflix, but didn't allow me because it outdated and said it was not compatible with my phone. So I did a bit of research and found a post in "mi community" that said it was because phone had bootloader unlocked. The phone was new and I didn't change anything of it, but I found the bootloader was unlocked.
Installed fastboot and adb drivers, locked bootloader and got myself into a... Brick?
-I can still load into fastboot.
-If I turn on the phone, It tries to load android but loads Mi-Recovery 3.0 instead. Recovery also says "This MIUI version can't be installed on this device"
I'm so lost from this point, I need to know if there is a way to flash any rom, and which one do I need.
Thanks in advice
stuck on recovery
Most likely a chinese phone that came with global rom. If it came with global rom try flashing chinese rom and then unlocking bootloader and reflash global. Do not lock bootloader after flashing global.
toxiccat said:
Most likely a chinese phone that came with global rom. If it came with global rom try flashing chinese rom and then unlocking bootloader and reflash global. Do not lock bootloader after flashing global.
Click to expand...
Click to collapse
Thanks for your answer, that is exactly what I've.
The problem is I tried to flash a Chinese from but it always denie it. Tried to flash the last global rom and allows me to do it with the same program.
Not sure where I can get the official chinese rom or how to bypass the xiaomi protection.
Thanks for helping! Hope I can somehow do it
Locked bootloader
Try searching for tools below which might help.
Saki / XiaomiADBFastbootTools
XiaomiADBFastbootTools-6.5.1-Win
I had hard bricked mine and had to take back off and use EDL to revive.
toxiccat said:
Try searching for tools below which might help.
Saki / XiaomiADBFastbootTools
XiaomiADBFastbootTools-6.5.1-Win
I had hard bricked mine and had to take back off and use EDL to revive.
Click to expand...
Click to collapse
I don't find the way to reboot (via software) to EDL from fastboot, is still possible to access it by opening the phone?
Locked bootloader
23javi23 said:
I don't find the way to reboot (via software) to EDL from fastboot, is still possible to access it by opening the phone?
Click to expand...
Click to collapse
If you can flash global ROM. I think you just need to unlock bootloader and then flash China ROM once you have unlocked bootloader.
China ROM link below
https://xiaomifirmware.com/roms/latest-official-miui-roms-for-xiaomi-mi-max-3/
toxiccat said:
If you can flash global ROM. I think you just need to unlock bootloader and then flash China ROM once you have unlocked bootloader.
China ROM link below
https://xiaomifirmware.com/roms/latest-official-miui-roms-for-xiaomi-mi-max-3/
Click to expand...
Click to collapse
It lets me flash de global one, but when I try to do the same with chinese rom, it says the version is lower, so I can't "downgrade".
It's weird because according to version number, the global one was a few versions lower
Solved the issue
The same issue , i was also encountered , After Flashing with "Xiaomi_Mi_Max_3_V10.2.1.0.PEDMIXM_20190226.0000.00_Global_9.0" Mi Max 3 with the MiFlash20191206 tool , by default the tool used "Clear data and Lock".
The tool saying "Flashing" and my phone got rebooted and went to MI Recovery 3.0 and also i got the message as
"This MIUI version can't be installed on this device".
I am not clueless how to proceed. So downloaded the Chinese version and again i tried to flash with above tool. Now tool said that "Can't Erase Locked" phone.
So Now i connected to Miflash_unlock with fastboot and connected to mi account and again i unlocked the phone.
Now my phone automatically booted to the Global version.
So i hope the issue is selecting the option as "Clear data and lock" . We need to select only "Clear data" in the flash tool.
23javi23 said:
Hello guys.
I recently bought this phone and wanted to use netflix, but didn't allow me because it outdated and said it was not compatible with my phone. So I did a bit of research and found a post in "mi community" that said it was because phone had bootloader unlocked. The phone was new and I didn't change anything of it, but I found the bootloader was unlocked.
Installed fastboot and adb drivers, locked bootloader and got myself into a... Brick?
-I can still load into fastboot.
-If I turn on the phone, It tries to load android but loads Mi-Recovery 3.0 instead. Recovery also says "This MIUI version can't be installed on this device"
I'm so lost from this point, I need to know if there is a way to flash any rom, and which one do I need.
Thanks in advice
Click to expand...
Click to collapse
Hi there,
I encountered the same issue. I tried to flash some CN Rom without enough research, without knowing that you can't just flash an Android 10 rom from 9 directly by recovery (even TWRP). So I ended up Fastboot or TWRP but never able to boot into system. Fortunately I didn't flash my Max3 by fastboot rushly, so my phone was still unlocked.
This is how I solved it:
1. Download an official CN ROM (the below I used is MIUI 11 with Android 9.9.x);
I can't post link here but search "miui通过线刷升级" - you shall see a miui.com link ending with shuaji-393.html. That's the page I download the Mi Max3 ROM from.
2. Use MiFlash to flash the official ROM with the flash option "clean all", NOT "clean All and lock";
3. The phone shall reboot into system, give it 5-10 minutes;
4. Flash the miui.eu ROM you like (DO make sure it is Android 9 tho) by recovery (tutorial given under every official xiaomi.eu ROM download).
Again it's easy to search
It took me less than an hour to do it (I don't have much experience with new XiaoMi phone). So don't worry about bricking your phone forever.
Hope it helps to destress
Hi guys. I need some help too because I'm not totally sure what I have to do here so if anyone can give me some tips I would appreciate it.
I just ordered the 128gb 6gb ram version of Mi Max 3 and it might come with the global rom and already unlocked. Should I use the Mi flash tool to install the file MIUI 11 V11.0.3.0.PEDCNXM android 9 fastboot file? then after that installs I should lock the bootloader and then unlock it again myself with my mi own account? I just want to make sure that this is the correct way to do it.
Also after it I unlock it should I flash the newest xiaomi.eu rom with android 10 or do i have to do something else first? Thank you
Hello,
I have a Redmi Note 8 pro (China version). I unlocked the bootloader and flashed the Global ROM. Unfortunately, the phone didn't reboot and it is now stuck with message "this ROM can't be installed on this device".
I realized afterwards that many other users had the same problem. Now it is impossible to flash the chinese Rom again (I get the CRCLIST flash error).
I believe my only option now is to re-flash the China stock ROM using the EDL method and an authorized Xiaomi Account. Can anyone help me do that?
If anybody has other suggestions, that would be really helpul.
You may flashed lower version of miui. If you can enter into fastboot mode, flash with latest China miui, then install TWRP, then use TWRP to flash global rom. I used twrp here and it works for my china phone, now im on global rom.
Just my 2 cents:
1. Always flash stock ROM via fastboot. ALWAYS use option "clean all". NEVER use option "clean all and lock"
2. Make sure the ROM's folder path is not containing space characters. Several stupid errors can come from this.
Ex: C:/this_is_the_rom_path
3. Use USB2.0 port from your PC. Better plug the device into USB2.0 rear port.
I couldn't make any of my USB front ports to work. Only the USB2.0 rear port.
MarkLev said:
Just my 2 cents:
1. Always flash stock ROM via fastboot. ALWAYS use option "clean all". NEVER use option "clean all and lock"
Click to expand...
Click to collapse
Unfortunately I believe that's precisely the mistake I made... Now the bootloader is locked again and I cannot unlock another time because I have no access to the phone. Mi Unlock Tool says "please add your account in developer options > Mi Unlock Status".
What happens next then?
petenoni said:
What happens next then?
Click to expand...
Click to collapse
Nothing, I cannot unlock the bootloader, cannot flash anything, and cannot boot the phone. I'm stuck here :/
idog8818 said:
You may flashed lower version of miui. If you can enter into fastboot mode, flash with latest China miui, then install TWRP, then use TWRP to flash global rom. I used twrp here and it works for my china phone, now im on global rom.
Click to expand...
Click to collapse
Thanks for the advice. Unfortunately, I believe the bootloader is locked again now. I can put the phone in fastboot mode, but I cannot flash anything (not allowed in locked state).
If anyone knows how to flash with EDL method... But of course we would need an authorized account to do that.
laxsmi said:
Thanks for the advice. Unfortunately, I believe the bootloader is locked again now. I can put the phone in fastboot mode, but I cannot flash anything (not allowed in locked state).
If anyone knows how to flash with EDL method... But of course we would need an authorized account to do that.
Click to expand...
Click to collapse
You have to wait untill "lock timer" expires , unlock BL again and flash stock ...
zOOk1981 said:
You have to wait untill "lock timer" expires , unlock BL again and flash stock ...
Click to expand...
Click to collapse
That's not possible, the phone has no Mi account attached to it... And how can I add an account to the phone when it doesn't boot?
laxsmi said:
Now the bootloader is locked again and I cannot unlock another time because I have no access to the phone. Mi Unlock Tool says "please add your account in developer options > Mi Unlock Status".
Click to expand...
Click to collapse
laxsmi said:
That's not possible, the phone has no Mi account attached to it... And how can I add an account to the phone when it doesn't boot?
Click to expand...
Click to collapse
I remember mi unlock tool will work in fastboot mode. I recommend you to use mi unlock tool which you used first time to try in fastboot mode. It may say: you need to wait xxx hours, then you have to wait. Or it may unlock directly like first time. Since you unlocked first time, it will be bounded into your Mi account already.
If you have fastboot mode available, do NOT too worried, more likely to you have it back. using SP Flash tool with paid auth account is last step.
Could you fix it?