{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my daily driver that I have decided to share. With the increase of big tech and government overreach in our lives, I felt more of a desire to move away from Google and the like. OnePlus 5 & 5T was built with lineagos and microG/LineageOS source and is fully functional.
What is this?
This is LineageOS with all closed-source binary Google blobs removed and replaced with microG. I.E no Play services or GAPPS. UnifiedNLP is used as networking location provider vice Google's NLP. F-Droid is installed by default providing alternative app store. However, with Aurora store you can still install Google Play store apps with ease (requires additional installations).
It is strongly recommended not to install GApps as this ROM contains a replacement for them.
Known issues
You tell me!
Installation with lineage recovery:
here for cheeseburger
here for dumpling
Installation with twrp
Clean flash
- Backup your data (recommended)
- Remove custom encryption pins/passwords (recommended)
- Reboot to TWRP
- Wipe system / data / cache / vendor (do not format data - this will erase the internal memory)
- Flash firmware (if needed), build (also no-verity if you want to run decrypted)
- Flash Magisk for root (if needed) - Restart
Dirty flash (Update)
- Backup your data (recommended)
- Reboot to TWRP - Flash new firmware (if needed) and update the build (followed by no-verity if you were decrypted earlier)
- Restart"
Dirty Flash (OTA)
Updates can be downloaded and installed on your phone via lineageos_updates.
See under settings/system/advanced.
If it is not possible to install the update automatically, or if you want to install it manually, please follow these steps,
select install in twrp/ parent folder/data/lineageos_updates.
selects the Rom and installs it and anything else you want to install, then restart.
Other information
Google Play Store Alternative If you want full access to normal android Play Store apps do the following: Open F-Droid app. Search for Aurora Store and install. Once opened select the appropriate option, generally option #1 will be the most common used with this ROM as long as it has not been modified by the user. Once setup you will have access to all applications as normal. Some apps require Play Services and cannot be used, This requires Magisk, which is not provided in our base rom. Once you have reached Magisk, you need to read and install NanoDroid, which can be found here.
XDA | Download website .
Do not publish bug reports without specifying logs (logcats) or steps to reproduce the bug.
Download OTA
Oneplus 5 (cheeseburger)
Oneplus 5T (dumpling)
OrangeFox oneplus 5 (forcedecrypt)https://sourceforge.net/projects/crdroid/files/cheeseburger/6.x/recovery/
TWRP Official
TWRP https://dl.twrp.me/cheeseburger_dumpling/
Firmware: cheeseburger/dumpling
Root: Magisk v20.4 or Magisk Beta v21
No VerityNo Verity
Support for german users
android-freaks.de
Telegram Group
t.me/losoneplus5
All credit goes to LineageOS team, crDroid team, codeworkx and neobuddy89.
Contributors
Exodusnick
Source Code Rom: https://github.com/LineageOS
Device tree: device_oneplus_cheeseburger
Device tree: device_oneplus_dumpling
Device tree: oneplus_msm8998-common
Kernel: kernel_oneplus_msm8998
Source Link microG:
https://github.com/lineageos4microg
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2019-06-26
Last Updated 2020-11-27
Screenshots
Added to the OnePlus 5 Index Thread here.
Is this in any way related to the already existing MicroG-enabled versions of LOS for all officially supported devices? Sorry but I don't see the point of using this over the "official" LineageMicroG builds. It just looks like a copy and paste thing to me
d1n0x said:
Is this in any way related to the already existing MicroG-enabled versions of LOS for all officially supported devices? Sorry but I don't see the point of using this over the "official" LineageMicroG builds. It just looks like a copy and paste thing to me
Click to expand...
Click to collapse
I'm building with this.
https://github.com/lineageos4microg/docker-lineage-cicd
so no copie and paste. it's unofficial, and I haven't seen that there's already an official one.
do you have a problem with that ? i don't .
OT end .
Flashing..
dialfonzo said:
Flashing..
Click to expand...
Click to collapse
I see the same way
Exodusnick said:
I'm building with this.
https://github.com/lineageos4microg/docker-lineage-cicd
so no copie and paste. it's unofficial, and I haven't seen that there's already an official one.
do you have a problem with that ? i don't .
OT end .
Click to expand...
Click to collapse
It's not "official", but there is a fork of LOS being maintained that incldues F-Droid amd MicroG by default and adds signature spoofing support. It takes all devices that are officially supported by LOS and builds a MicroG-fork.
This is why I don't see the point of this here.
See the thread here https://forum.xda-developers.com/android/software/lineageos-microg-t3700997
And the website with downloads for all devices
https://download.lineage.microg.org
@d1n0x
yes beautiful is with me also everything in it . whether the sinn makes or not is my problem .
and not yours . End
topic finished .
Good ROM, everything working fine. Thanks.
d1n0x said:
It's not "official", but there is a fork of LOS being maintained that incldues F-Droid amd MicroG by default and adds signature spoofing support. It takes all devices that are officially supported by LOS and builds a MicroG-fork.
This is why I don't see the point of this here.
See the thread here https://forum.xda-developers.com/android/software/lineageos-microg-t3700997
And the website with downloads for all devices
https://download.lineage.microg.org
Click to expand...
Click to collapse
I use the official MICROG fork version since the beginning, great ROM
How's the battery life with this rom, compared to Stock? (running OxygenOS 9.0.9)
Why does this ROM have Fakestore preinstalled? Who actually uses that? Plus, it's a system app so you can't easily delete it without modifying system partition.
Pokemetti2 said:
Why does this ROM have Fakestore preinstalled? Who actually uses that? Plus, it's a system app so you can't easily delete it without modifying system partition.
Click to expand...
Click to collapse
It's not meant to be used. It's an empty placeholder so apps don't complain about missing play store
d1n0x said:
It's not meant to be used. It's an empty placeholder so apps don't complain about missing play store
Click to expand...
Click to collapse
I know, but I would like to use the patched playstore from nanolx instead and this blocks me from doing so.
Pokemetti2 said:
I know, but I would like to use the patched playstore from nanolx instead and this blocks me from doing so.
Click to expand...
Click to collapse
afaik it will just overwrite fakestore
d1n0x said:
afaik it will just overwrite fakestore
Click to expand...
Click to collapse
Not with just the apk
Pokemetti2 said:
Not with just the apk
Click to expand...
Click to collapse
Well if you would like to use setialpha's patched play store you need to flash the NanoDroid zip anyway, I don't see the issue.
Does the rom supports mirrorlink
d1n0x said:
Well if you would like to use setialpha's patched play store you need to flash the NanoDroid zip anyway, I don't see the issue.
Click to expand...
Click to collapse
No, the apk is available on fdroid
Related
This thread hosts personal builds of LineageOS 17.x and PixelExperience 10 for Mix 2. Full credits to Arian, Wight and others doing the actual bringup, allowing us to build upon the awesome work.
Small changes in my builds:
Default stretch-to-fullscreen (force apps to render in 18:9) - LOS official solution defaults to OFF, which complicates setup
Grey-blue DeskClock color scheme (when possible)
Navbar stays on the right side of the screen under 270° rotation (optional - set the behaviour with "setprop persist.ui.seascape.disable <true|false>" in a rooted shell)
Signature spoofing support from MicroG
Revived navbar layout tuning via sysui_nav_bar tunable
...
What's working:
Everything?
Instructions:
Use firmware Stable V11.0.3.0
Use official TWRP
Download the latest build and optionally GAPPS (PE comes with GAPPS though, don't use any from external sources)
Reboot to TWRP
Flash the latest build, GAPPS and whatever other additions you need
Reboot
Extras:
Read here if you want to use unencrypted data - post is from Oreo thread, but still applies
Downloads:
SourceForge folder: https://sourceforge.net/projects/andyyan/files/ - new releases in the "10" folder
Root: use Magisk
Google Apps: http://opengapps.org/
Source Code:
https://github.com/LineageOS/
Donation:
Donate to @NeoArian
Donate to @wight554
Donate to me
XDA:DevDB Information
LineageOS 17.x, ROM for the Xiaomi Mi Mix 2
Contributors
AndyYan, NeoArian, wight554
Source Code: https://github.com/LineageOS/
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI V11.0.3.0
Based On: LineageOS
Version Information
Status: No Longer Updated
Created 2020-01-11
Last Updated 2020-02-27
Reserved
I don't know for how much longer I'll be able to keep building these, but even if I do stop, these should still serve as a good basis for installing GSIs, so you can leverage many of them out there, including my own. As far as I've tested the only major bug on that front is the proximity sensor.
Compared to the test builds of last year...
- Now using official LOS device trees - you might have to clean flash even if you come from a previous test build by me
- IMPORTANT regarding PE - if you're clean flashing, flash the package twice so that /system can be populated properly. I have no idea why this is happening...
is there any ETA on android 10 Resurrection Remix?
also thanks for your work as usual!
Mollic said:
is there any ETA on android 10 Resurrection Remix?
Click to expand...
Click to collapse
Its customization-centric role has largely been replaced by Havoc nowadays, so with my limited SSD space I'm dropping that as well.
Screen time have a bug, is look like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
great job for years
Grick713 said:
Screen time have a bug, is look like this.
Click to expand...
Click to collapse
Have you changed your system font? Seems incompatible.
Have a problem while installing new PE.
Wiped everything (system, vendor, data). Installed zip (twice, as advised), no error messages.
TWRP warns on reboot that no OS is installed. Phone reboots to fastboot.
Tried twice with the same result. Tried re-downloading zip without success.
Ok, managed to solve the problem. As the device tree is from LOS, the solution is in the LOS thread. Need a recovery with support for SAR. Seems like official TWRP does not. So flashed recovery from the first post of LOS thread and the OS have installed just fine.
dairinin said:
Have a problem while installing new PE.
Click to expand...
Click to collapse
Thing is, I tried Wight's SAR TWRP and it's the same thing on my side - I really had to flash it twice (but not in the same queue/go).
This shouldn't have happened in the first place either, as LOS flashed just fine without this hassle.
@AndyYan
Nice to see you again being active, and thx (of course to all users who made it possible) providing LOS 17.
I know, this is probadly the wrong thread for this, but openGapps doesn't provide GAPPS for 10. The option is always greyed-out. Where do i get GAPPS then?
SanHelios said:
@AndyYan
Nice to see you again being active, and thx (of course to all users who made it possible) providing LOS 17.
I know, this is probadly the wrong thread for this, but openGapps doesn't provide GAPPS for 10. The option is always greyed-out. Where do i get GAPPS then?
Click to expand...
Click to collapse
You can find them on Sourceforge: https://sourceforge.net/projects/opengapps/files/arm64/beta/
However, not flashable on LOS: Gapps detect SDK 27 (Android 8.1). @AndyYan, can you look into it?
Update: found that PE prop.default file is fine, but for LOS it's old (says SDK=27 and some stuff more). I think you forgot to include proper props to LOS build.
SanHelios said:
@AndyYan
Nice to see you again being active, and thx (of course to all users who made it possible) providing LOS 17.
I know, this is probadly the wrong thread for this, but openGapps doesn't provide GAPPS for 10. The option is always greyed-out. Where do i get GAPPS then?
Click to expand...
Click to collapse
candiduslynx said:
You can find them on Sourceforge: https://sourceforge.net/projects/opengapps/files/arm64/beta/
However, not flashable on LOS: Gapps detect SDK 27 (Android 8.1). @AndyYan, can you look into it?
Update: found that PE prop.default file is fine, but for LOS it's old (says SDK=27 and some stuff more). I think you forgot to include proper props to LOS build.
Click to expand...
Click to collapse
Aw, I don't use GAPPS so I didn't verify that...
Does manually changing prop.default make it pass? Supposedly there's nothing in the device source dictating that.
AndyYan said:
Aw, I don't use GAPPS so I didn't verify that...
Does manually changing prop.default make it pass? Supposedly there's nothing in the device source dictating that.
Click to expand...
Click to collapse
There are several lines that need to be changed (for instance, arch is set to 'arm' instead of 'arm64'). I decided to go with PE for now and don't want to reconfigure all stuff once more.
What a treat to start 2020 to! Thanks for the new build Andy. I'll be reporting back if I find something buggy or similar =)
candiduslynx said:
You can find them on Sourceforge: https://sourceforge.net/projects/opengapps/files/arm64/beta/
However, not flashable on LOS: Gapps detect SDK 27 (Android 8.1). @AndyYan, can you look into it?
Update: found that PE prop.default file is fine, but for LOS it's old (says SDK=27 and some stuff more). I think you forgot to include proper props to LOS build.
Click to expand...
Click to collapse
Weird, I didn't had this problem yesterday. I used "open_gapps-arm64-10.0-nano-20191209-BETA.zip" on LOS.
@AndyYan Thanks for your build of LOS, it's working like a charm here.
Just gotta need a patch for my provider APN. (I'm on it)
Great news!!! Thank you Andy. Can i dirty flash from LOS16 to LOS17?
The problem is solved，thanks！
SanHelios said:
@AndyYan
Nice to see you again being active, and thx (of course to all users who made it possible) providing LOS 17.
I know, this is probadly the wrong thread for this, but openGapps doesn't provide GAPPS for 10. The option is always greyed-out. Where do i get GAPPS then?
Click to expand...
Click to collapse
I recommend flamegapps
Thanks @AndyYan for the build. I have flashed the PixelExperience version and it is working fine. Using Parrot043's GCam version and the photo quality is also fine.
The major issue I have is regarding VoLTE incoming call support on my carrier (Airtel/India). Outgoing calls are fine, but for incoming (VoLTE) calls my phone doesn't ring at all, but on the caller side it looks as if it is ringing and I am not answering calls. For the time being I have switched to WCDMA mode.
Any input to solve the VoLTE issue is highly appreciated. I have tried creating an APN named IMS with type as ims, but that didn't work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
We have progressed to LineageOS 18.1
Flash instructions :
Use latest pbr recovery for miatol, supports decryption - beta available here, https://pitchblackrecovery.com/joyeuse/.
DO NOT - Wipe data!, ONLY FORMAT, otherwise you may hose the phone.
There is a way to fix this without the fastboot factory clean, flash and lock with the official Xiaomi tool, which was forcing you to clean and lock... now available here: https://github.com/Szaki/XiaomiADBFastbootTools
If you hose the phone, use this tool - you need to install JRE though, as the tool is Java base. Put your phone is fastboot, use the tool to download the latest global rom (or whichever). Then go to where its downloaded, extract the .xy/tar file, then go back into the tool and under "image" select the folder INSIDE the folder you just extracted, then select "clean install" and install it. This will flash the majority of imgs but will error out at the end and be unable to create the "user data" partition.
That's okay, because all of the partitions will be setup again, and you can flash any rom you want again. So when its done, and still in fastboot, fastboot flash recovery recovery.img (recovery.img being the latest joyeuse pbr recovery, you renamed to recovery.img and were in that folder in the command prompt, so it will flash that recovery) or use the tool to select that recovery and it will flash it for you and reboot into for you if you like.
(Do this step last, after Magisk, if you want to unencrypt, no worries if you don't unencrypt - PBR recovery will decrypt your data ON THE SECOND TRY OF ENTERING YOUR SCREENLOCK PIN NUMBER...), the new PBR Miatol Beta 10/14/20, fixes this issue, it is now decrypted on the first entry of the phone's lockscreen PIN. Then flash disable_dm-verity_forceencrypt.zip available here for those who want decrypted data partition: https://zackptg5.com/android.php#disverfe and other places as well.
If you are encrypted and decide to unencrypt later, you will need to flash the disable_dm-verity_forceencrypt.zip in miatol recovery, then format data. Store roms, gapps, recoveries (just in case), disable_dm-verity, magisk install and uninstall and all that stuff on the SD card, so you can use them in PBR after you format DATA (the first step after installing PBR miatol recovery), just FYI. Then do the following:
Flash ROM
Flash OpenGAPPS for android 11 nano
Boot into android, make sure its working and install Magisk Manager 8.0.7, then reboot into recovery and install Magisk 21.4 (in recovery, I did not need to extract the boot.img and patch in Magisk Manager, and reboot into recovery to flash the patched boot.img, but your results may be different): https://github.com/topjohnwu/Magisk/releases. If you want to unencrypt (no guarantees its permanent though) you need to format data, THEN FLASH MAGISK, then flash disable_dm-verity (always the last step)- I usually wipe dalvik and cache too.
USE LATEST MIATOL PBR RECOVERY, PLEASE.
SD card issues resolved with the implementation of the EXFat android driver.
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
Apologies for the lack of updates, was diagnosed with stage 4 metastatic cancer and this project was not on my priority list anymore...
Update 28/1/21:
Release notes:
LineageOS
Device: Unified (Miatoll)
Developers: ScaryMen1325 & Loptr4
ROM Version: 18.1
Android Version: Android 11
Build date: 22/01/2021
Status: UNOFFICIAL
Changelog:
• Fixed power related issues
• Added useful apps (thanks to Dev: Emulond for that)
• Other fixes and performance improvements
Notes:
• It's 2nd test version, if you found bugs, give log.
• Using loki kernel by default, haven't tested custom kernel.
Download here:
https://drive.google.com/file/d/1M5-cRBfrRdBdNYGzy5G9bOa1Ncf5JkE4/view?usp=sharing
Please note this is a unified release, you should do a clean install unless you're coming from a unified ROM alreadyl.
Will keep you more regularly updated now that I'm out of the hospital....
Perfect will try tonight
Belpek said:
Perfect will try tonight
Click to expand...
Click to collapse
Have you tried it?
How is it? Good for daily?
There are so many Joyeuse LineageOS ROMs I don't even know where to start.
i don't see you mentioned mobile network in bugs section; does it work? i'll try this rom in a couple hours
Tell me please. If phone will be locked with black screen and i say "ok google". Will it work? Or it will work only if screen is unlocked?
sorry if its not much, since i can't do much on this rom. flashed nikogapps, google sign-in succeded but it seems that i cant install anything from play store.
(dumb me forgot to screenshot, it only says "something went wrong" when i try to install an app from play store)
about ok google from lockscreen/screen off, i tried it, also not working. can't confirm about volte since volte still relatively new here and hasn't developed that much.
Why nikgapps? Open gapps nano is recommended.
Sent from my Redmi Note 9 Pro using Tapatalk
Flash it and using it by now, so far so good, sometimes it gets a little freeze but nothing serious, miracast reboots phone so dunno if this is a bug or not, proximity sensor is another one cuz while I was in speaking with my pal screen was on all the time and my ear activated bluetooth and DND
Have nothing to talk about VoLTE cuz in my country is not available.
ANX modules left my phone in bootloop so instead I went for GCam. Flash unofficial opengapps nano and make sure to use Wi-Fi to complete the first run.
Magisk canary works so it can be rooted.
Keep the hard work!
*Sorry if I made some writing mistakes, english is not my native language. Cheers!!
Tried flashing the latest build (02.10.20) using the latest TWRP from the thread you linked but I get the "can't install package over new build" error. Is it required to come from stock miui?
gigahurts said:
...
Newer Build:
https://mega.nz/file/PlkgiSzS#C_tIspgbtGDrweztQ83lADHyEQf4dTkIUiSAqgjVAFk
NOTE: You should be on 11.0.7.0 QJZMIXM (EU) Global firmware for this build. Also, I have a newer build, but its not ready for primetime and has issues with SMS and Call Log enabling permissions.
Oh, and BTW, if you hose your ROM/Phone, just flash vbmeta.img in fastboot to avoid using the factory fastboot img flash, otherwise you many need to wait another 7 days to unlock the bootloader.
...
The dev for this build is: @wight554, all thanks and credit go to him, he is awesome, and I, for one, seriously appreciate this ROM as it works very well for me. It is so snappy and smooth, with a super fast boot time, no reboots and generally pretty frickin AWESOME!
...
Click to expand...
Click to collapse
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Swiftor said:
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Click to expand...
Click to collapse
hey Swiftor,
We will continue to work on this rom. LineageOS has been around a long time, development has spread across so many devices, however, the hardware of many devices is very similar, so support will continue. The last Redmi Note 8 pro, had a mediatek SOC, and made development difficult until MIUI decided to release its source. The snapdragon platform is very mature and is more easily and readily available to develop roms for. Redmi Note 10 pro has been released in India, and has a slightly better processor 765g vs 730g, but the kernel and hardware are very similar, so I development for this phone and the Note 10 pro should parallel and continue. We are working on submitting an official 18.0 release, but have to have all hardware (and software) fully functional and as close to zero bugs as possible. I predict development to continue as long as Xiaomi continues to release new MIUI roms for this device (and they continue to release roms for phones much, much older than this).
I have updated the first post with a newer release. Let me know if you have any issues and I will try to help.
Thanks for the props too
does magisk 21 work on the latest build? really excited for android 11
So this will not be compatible with curtana devices?
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.??
everything is working perfectly and its showing charging rapidly , it was on 88% and showing 10 minutes until full
everything is completely smooth gonna keep it for my daily use
Bantryred said:
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.
Click to expand...
Click to collapse
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
there're few thing that you need to fix @gigahurts
1) you putting wrong kernel source. its should be this link
2) why would you mirror it when you can get it in his sourceforge
Why is today's build 590MB while all others are 1.1GB?
pwnaz said:
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
Click to expand...
Click to collapse
Sorry for the delay, Im on Curtana so dont know if it makes a difference, but I used no. 16 - mi 10 Global(11)
I also had to hide Magisk Manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 12.0, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the changelog for a full list of changes & features.
What's working
Active Edge
Selinux Enforcing
Encryption
RIL (Calls, SMS, Data)
Bluetooth
Wi-Fi
Camera
Video Recording
Video Playback
Audio ( Record and Playback )
Sensors
Flash
Led
What's not working
Lockscreen shows an under display fingerprint sensor indicator
There is some missing functionality and a few bugs as this is a very early build of Lineage
Installation
Download the latest supported Lineage OS build, TWRP image and optionally the TWRP installer zip.
Reboot to bootloader
Wipe userdata for initial install (fastboot format userdata)
Fastboot into TWRP recovery (fastboot boot twrp.img)
Flash the latest build of Lineage OS
Reboot to bootloader and fastboot TWRP again
(Optional) Flash gapps of choice (MindTheGapps are recommended)
Reboot to system and don't install the TWRP app
(Optional) Flash custom kernel / TWRP / Magisk
A more detailed installation guide can be found on the wiki.
Updates
Simply repeat steps 4 - 7. You shouldn't need to flash factory images as all partitions (firmware, vendor etc.) are updated with the lineage zip.
Downloads
Latest Lineage OS 19.0 (taimen)
Latest Lineage OS 19.0 (walleye)
MindTheGapps
Google Fi Addon
TWRP (taimen) / (walleye)
Magisk
Credits
razorloves
npjohnson
javelinanddart
RaymanFX
Sultanxda
LineageOS Team
Source
android_device_google_wahoo
android_device_google_taimen
android_device_google_muskie
android_kernel_google_wahoo
proprietary_vendor_google
Feel free to join my Pixel 2 telegram group here.
Changelog
17/11/21
Initial release
will test this one very soon on my pixel 2XL, hope to see official release soon, thanks to the developer for the good work
Thanks guys.
Is VoLTE working?
mustansir_vora said:
Is VoLTE working?
Click to expand...
Click to collapse
Yes, and Wi-Fi Calling.
Hey, I downloaded and installed. Everything so far is working perfectly! Thanks so much.
Y'all add the lockscreen album art like in pixel dust rom
Can we use bank apps and office apps ? How to install magisk after flashing this rom? Cab we follow voenabler to enable volte ?
Big thanks first to the developer..Keen to try out this rom, I see the rom zip can be installed like a normal zip and it will repartition the phone, my query is does the repartition allow for downgrade to Android 11 just in case? Or do we need to change the partitions again?
not_a_tech_guy said:
Y'all add the lockscreen album art like in pixel dust rom
Click to expand...
Click to collapse
LOS devs generally dont add extras like that....usually they like to keep it strictly LOS
Is there android 12 icon customization ?
sampathkumar2811 said:
Can we use bank apps and office apps ? How to install magisk after flashing this rom? Cab we follow voenabler to enable volte ?
Click to expand...
Click to collapse
Maybe one question at a time next time?
You can install magisk same as on any ROM - generally this is the most common way :
Installation
The Magic Mask for Android
topjohnwu.github.io
Assuming you pass safetynet after magisk install then depending on banking app you should be able to use it (some banks require more steps to avoid root detection, and a few cannot be beaten. I cant say for sure even knowing your bank, because it all depends on your setup....anything root, or beyond is a try and see proposition - no point asking others as they dont have your device or perhaps use the apps you do. If you want certainty, youre in the wrong place, and should stick to stock....any change in ROM or magisk or on Google back end could end in failure one month to the next.
If you have queries regarding magisk, how to install or how to pass safetynet or try and avodi root detection by apps (including bank), then your questions are *usually* best served asked and answered in the magisk support thread:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
In the main magisk topics list, you may find articles relating to specific bank apps:
Magisk
Magisk - The Universal Systemless Interface, to create an altered mask of the system without changing the system itself.
forum.xda-developers.com
Can you try voenabler?...sure you can try any magisk module, if it doesnt work, uninstall it, thats the beauty of it, its reversible....
as always your best bet for any help is to use the search box at top right of screen before posting a new question, its free and it avoids asking the same questions over and over...all the above could have been found via searching...
Kakashi04 said:
Android version ?
Click to expand...
Click to collapse
Read the first line of the first post.....literally right there dude
73sydney said:
Read the first line of the first post.....literally right there dude
Click to expand...
Click to collapse
I was so exited so I didn't noticed
73sydney said:
Maybe one question at a time next time?
You can install magisk same as on any ROM - generally this is the most common way :
Installation
The Magic Mask for Android
topjohnwu.github.io
Assuming you pass safetynet after magisk install then depending on banking app you should be able to use it (some banks require more steps to avoid root detection, and a few cannot be beaten. I cant say for sure even knowing your bank, because it all depends on your setup....anything root, or beyond is a try and see proposition - no point asking others as they dont have your device or perhaps use the apps you do. If you want certainty, youre in the wrong place, and should stick to stock....any change in ROM or magisk or on Google back end could end in failure one month to the next.
If you have queries regarding magisk, how to install or how to pass safetynet or try and avodi root detection by apps (including bank), then your questions are *usually* best served asked and answered in the magisk support thread:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
In the main magisk topics list, you may find articles relating to specific bank apps:
Magisk
Magisk - The Universal Systemless Interface, to create an altered mask of the system without changing the system itself.
forum.xda-developers.com
Can you try voenabler?...sure you can try any magisk module, if it doesnt work, uninstall it, thats the beauty of it, its reversible....
as always your best bet for any help is to use the search box at top right of screen before posting a new question, its free and it avoids asking the same questions over and over...all the above could have been found via searching...
Click to expand...
Click to collapse
Noted.Thanks for the detailed explanation.
Thanks for the rom
This seems to install fine but LTE data is laggy at times, very different. Will work fine one minute, then no internet the next 80% signal.
The touch sensor seems a bit out of whack at times as well, but mostly works.
The device is not play store certified. Not able to register android ID after 2 attempts.
On the wiki it states to adb sideload the zip but in your post it says to use twrp. I used twrp but not the sideload function, would that cause my device to not certify?
Perhaps the only glitch I ran into as of right now was because I tried using Flame GApps for Android 12 instead of MindTheGApps. The Google Assistant add-on package for that "brand" of GApps wouldn't allow voice match to function, claiming it was unavailable for the device. I'd love to install the Flame GApps full package over the MindTheGApps package, but I know it won't work.
Naturally, as this is an early build the advanced restart menu and the ability to remove the Android 12 pill in gesture navigation is missing, but the former is easily worked around using the app "Simple Reboot" and the latter I can live with can be removed using a Magisk module.
Magnetox said:
Hey, I downloaded and installed. Everything so far is working perfectly! Thanks so much.
Click to expand...
Click to collapse
Hey sir if you don't mind ,can you please share your experience based on long day usage also will you be able to share battery usage screenshots and your device name is well
thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
USER BUILD
https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (WIFI) | (LTE)
gapps (Download from here)
First time installation:
Flash ROM via TWRP
Flash gapps (optional)
Format data
More detailed instructions HERE (just flash crDroid zip instead of LineageOS)
Update installation:
Reboot to recovery
Flash ROM
Sources:
ROM: https://github.com/crdroidandroid
Device tree: device tree WIFI | device tree LTE
Common device tree: common device tree url
Kernel: kernel url
Vendor: vendor url
Download:
WIFI | LTE
Known issues:
Internal storage cannot be decrypted by recovery
Credits:
@LuK1337, @bgcngm, LineageOS team - device sources
@gnumdk
@Wieczorkiewicz - tester for LTE variant
Visit official website @ crDroid.net
crDroid Galaxy Tab S5e Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Changelog
crDroid Blog
19.12.2022
crDroid 8.12
Boot animation fixed
17.11.2022
crDroid 8.11
13.10.2022
crDroid 8.10
Smart charging
12.9.2022
crDroid 8.10
Merged latest CAF tag to kernel
Safetynet fixed
26.7.2022
crDroid 8.7
22.6.2022
crDroid 8.6
New Game Space
17.5.2022
crDroid 8.5
Taskbar can be disabled in crDroid launcher settings
13.4.2022
crDroid 8.4
WARNING: GAPPS NEED TO BE REFLASHED. DIRTY FLASH WORKS, BUT YOU SHOULD HAVE A BACKUP JUST IN CASE.
29.3.2022
crDroid 8.3
12L update
15.2.2022
crDroid 8.2
Official status
3.2.2022
Initial build
Just installed it and it works fine!
Didn't encounter any bugs yet. I installed nikgapps core and magisk v 24.1
Installed Shamiko to pass SafetyNet
I installed nikgapps core and magisk v 24.1
Installed Shamiko to pass SafetyNet
Click to expand...
Click to collapse
@Zerogoki_00 How did you manage to install nikgapps (or anything else for that matter) when TWRP cannot access internal storage?
Does this require any particular Samsung blobs to be installed?
In other words, if coming from Lineage 18.1, can I just update TWRP to latest, install this ROM (including wiping data) and be on my merry way?
stepstra said:
@Zerogoki_00 How did you manage to install nikgapps (or anything else for that matter) when TWRP cannot access internal storage?
Click to expand...
Click to collapse
I use flamegapps, it works fine even across updates.
aserraric said:
Does this require any particular Samsung blobs to be installed?
In other words, if coming from Lineage 18.1, can I just update TWRP to latest, install this ROM (including wiping data) and be on my merry way?
Click to expand...
Click to collapse
It requires Android 11 firmware. Coming from Lineage 18.1 doesn't require updating firmware. Also you need to format data (wiping internal storage), not just wiping data partition.
Golbinex said:
I use flamegapps, it works fine even across updates.
Click to expand...
Click to collapse
Yes, but even so: how do you flash any ZIP when TWRP can't access storage due to encryption?
stepstra said:
Yes, but even so: how do you flash any ZIP when TWRP can't access storage due to encryption?
Click to expand...
Click to collapse
Sideload zip with computer or flash from sdcard.
Golbinex said:
I use flamegapps, it works fine even across updates.
It requires Android 11 firmware. Coming from Lineage 18.1 doesn't require updating firmware. Also you need to format data (wiping internal storage), not just wiping data partition.
Click to expand...
Click to collapse
That worked flawlessly (on a T725). And thanks for the reminder, I forgot again that wipe and format are different operations.
Golbinex said:
Sideload zip with computer or flash from sdcard.
Click to expand...
Click to collapse
Thanks. I already tried sideloading nikgapps before, but they don't work. But flamegapps do, so it's OK for now.
The new crDroid 8.2 Official is very nice indeed.
I had been using the @LuK1337 Lineage 19.0 and it is good too, but this one has nicer theming, while still retaining the solid Lineage base.
I use an SD card to hold the ROMs and stuff to avoid the Android 12 /data badness in TWRP, and it all works just fine.
Also ... I dirty flashed over Lineage 19.0 and it worked fine after going into the settings and getting the navigation buttons back. Obviously a clean install might have been needed, but luckily it was not.
crDroid 8.2
Flame Gapps basic
Magisk 24.1
MagiskHide Props Config 6.1.2-v137
Systemless Hosts
Universal SafetyNet Fix v2.2.1
AdAway 5.11.0
Youtube Vanced 16.29.39
Play Store says "Device is certified" and YASNAC gives 2 thumbs up.
Obviously we will all like to see a new TWRP with Android 12 support, but it is not vital, as you can sideload or use an SD card (which you should anyways, for backup).
Denisovich Index of Goodness: 97%
currently on last a11 crdroid build. can i just jump to this build or do i need to go back to stock?
Since I had to format data to go from Lineage 18.1 (Android 11) to this, I expect you will have to, as well.
But I don't see why you would have to go to stock in the process.
@aserraric thanks for the info. ill start getting my tablet ready for the upgrade.
As the DEV states, just update
droidbot1337 said:
@aserraric thanks for the info. ill start getting my tablet ready for the upgrade.
Click to expand...
Click to collapse
Im feeling a bit Dumb. If i want to use CRDroid as Root. Do i have to do a Magisk Root like on Stock Firmware wit Patching the AP File, or is it Rootable with just using twrp?
Psierra117 said:
Im feeling a bit Dumb. If i want to use CRDroid as Root. Do i have to do a Magisk Root like on Stock Firmware wit Patching the AP File, or is it Rootable with just using twrp?
Click to expand...
Click to collapse
you can flash in recovery
Psierra117 said:
As the DEV states, just update
Click to expand...
Click to collapse
yeah, already done. the update is great! there is some lag when opening the recents and the rotation is kinda janky but other than that its amazing! battery life is great so this tablet is now an amazing media tab!
so wired, I clean flashed the crdroid 8.2 and flamegapps, everything looks good. However it showed wifi connected but google play store showed no internet and offline, cannot install any apps.
If I flash lineageos 19 everything is good.
Works well on mine with microg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 12L (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: LineageOS/android_device_xiaomi_gemini
Kernel source code: LineageOS/android_kernel_xiaomi_msm8996
Working:
Camera (and flashlight)
Fingerprint reader
WiFi
NFC
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
Encryption (FBE)
WiFi Display
Broken:
Nothing (?)
Compatibility:
Compatible with all Xiaomi Mi 5 variants (32GB / 64GB / 128GB). Xiaomi Mi 5S and 5S Plus are not supported.Builds are based off the Xiaomi's Android 8.0 firmware with proprietary blobs from MIUI V10.2.2.0.OAAMIXM global stable package.
Device wiki:
Official wiki link
Downloads:
Official download links
Installation:
Follow instructions found in the respective wiki page
First build is already out! Remember, you need to format userdata since we moved from FDE to FBE.
Just had to comment and say, this ROM is absolutely beautiful. The implementation of 19.1 for gemini is just incredible. Little details with the colours, icons, sizing and highlights make it a joy to use! (I suppose some of this might be android 12s 'Material You' but I'm still blown away.
Can already tell the device is running much faster than before (had been on a recent 18.1 build).
This is actually so well polished that I will have to look into getting a new battery. Only reason I'm not using gemini as a primary device. Anybody have a recommendation on where to get a new battery?
Big thanks to bgcngm, absolutely amazing work. It is crazy to think such an old device now can still run the latest lineage!
I had trouble flashing this from twrp even after formatting data partition.
Flashed lineage is recovery and flashed through adb sideloa, everything went smoothly.
Thanks for such a polished build!!
I use this phone with work profile as well.
Will keep posted about it as well
(sorry for my english)
very very thanks!
smooth rom, works flawlessly
same problem here:
when flashing from twrp I got error, but no problems with lineage official recovery
the only little bug I found:
when I turn off the wifi completely, the 'internet button' remains lit
Can't install with twrp... log says error code 1, after format data. that error still showing...
btw i updated twrp version (which is have version support android 12 encryption) and i did again steps and still error code 1 is exist. no luck charm.
And cant install lineage recovery because my pc cant recognize my phone.. guess i have to wait for this 18.1 features... for now.. (sigh)
Heliosaga said:
Can't install with twrp... log says error code 1, after format data. that error still showing...
btw i updated twrp version (which is have version support android 12 encryption) and i did again steps and still error code 1 is exist. no luck charm.
And cant install lineage recovery because my pc cant recognize my phone.. guess i have to wait for this 18.1 features... for now.. (sigh)
Click to expand...
Click to collapse
Hi, I had the same issue. I had also installed the latest twrp (3.7.0_9). What worked for me was using the lineageos recovery instead of twrp. You can find that here:
https://mirrorbits.lineageos.org/recovery/gemini/20221016/lineage-19.1-20221016-recovery-gemini.img
Not sure if there is a proper solution to get twrp to work, this is more of a workaround.
Currently, Lineage Recovery must be used.
Inkypen's TWRP supports FBE, but it is an older version and only supports encryption up to Android 11.
Can we instal gapps from android 11?
kaishi12 said:
Can we instal gapps from android 11?
Click to expand...
Click to collapse
Looks like the Lineageos site has mindthegapps linked for android 12(L)
Google apps | LineageOS Wiki
wiki.lineageos.org
starlord047 said:
Looks like the Lineageos site has mindthegapps linked for android 12(L)
Google apps | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
How to instal zip file using lineage recovery?
kaishi12 said:
How to instal zip file using lineage recovery?
Click to expand...
Click to collapse
I am not sure. I sideloaded it with ADB.
starlord047 said:
I am not sure. I sideloaded it with ADB.
Click to expand...
Click to collapse
Yeah thks try flash twrp back with stuck on screen, sideload work with lrecov
Hi and thanks for keeping alive the mi5. I have only one issue with the contactless pay, always says that the device is rooted. I have install magisk with safetynet and almost all the apk is on zygisk i can make bank transaction with ebanking play store is ok but still can't make contactless payments. Any ideas. Thanks
Gvasilhs68 said:
Hi and thanks for keeping alive the mi5. I have only one issue with the contactless pay, always says that the device is rooted. I have install magisk with safetynet and almost all the apk is on zygisk i can make bank transaction with ebanking play store is ok but still can't make contactless payments. Any ideas. Thanks
Click to expand...
Click to collapse
You can try the magisk hide module
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com
yevac said:
You can try the magisk hide module
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried but not working.
Everything is ok with this. https://github.com/kdrag0n/safetynet-fix/files/9356078/safetynet-fix-v2.3.1-MOD.zip
Multiuser also working fine!!
Any idea about this "wakelock" in battery usage?
I am now fully convinced that you and the other Mi 5 maintainers are superhuman, @bgcngm. No way is this possible for regular people.
Famous last words: https://forum.xda-developers.com/t/...os-18-1-for-xiaomi-mi-5.4170027/post-83610929
bgcngm said:
So, just an heads-up. I am going to promote Mi 5 (gemini) to start getting A12 based builds. BIG WARNING: you will need to wipe userdata because we have switched from FDE to FBE. F2FS is no longer supported either.
Click to expand...
Click to collapse
If the device is not encrypted, then wiping userdata doesn't apply, right?