If anyone has Vinyl cut template PSD or Ai preferable like this one please do share as the websites like gadgetshieldz or dbrand doesnt have much of customization like customization only side colour or adding a picture on the skin
https://vecras.com/products/oneplus-7-pro-vinyl-skin-vector-cut-file-template-2019
So please do share if you found. i want to design like the below one with red border around side edges
krishnasen said:
If anyone has Vinyl cut template PSD or Ai preferable like this one please do share as the websites like gadgetshieldz or dbrand doesnt have much of customization like customization only side colour or adding a picture on the skin
https://vecras.com/products/oneplus-7-pro-vinyl-skin-vector-cut-file-template-2019
So please do share if you found. i want to design like the below one with red border around side edges
Click to expand...
Click to collapse
https://www.slickwraps.com/design
Design it there and choose OP7Pro as the model
(Tis a bit pricey tho)
djsubterrain said:
https://www.slickwraps.com/design
Design it there and choose OP7Pro as the model
(Tis a bit pricey tho)
Click to expand...
Click to collapse
75% off today
djsubterrain said:
https://www.slickwraps.com/design
Design it there and choose OP7Pro as the model
(Tis a bit pricey tho)
Click to expand...
Click to collapse
this i point is the vinyl around camera border and near volume buttons should be red but i am not able choose it in slickwraps
i.e why i required psd or ai file
krishnasen said:
this i point is the vinyl around camera border and near volume buttons should be red but i am not able choose it in slickwraps
i.e why i required psd or ai file
Click to expand...
Click to collapse
Can't you scale until it all fits?
Try the PSD here?
https://forums.oneplus.com/threads/clear-case-templates-for-the-7-pro.1040334/
djsubterrain said:
Can't you scale until it all fits?
Try the PSD here?
https://forums.oneplus.com/threads/clear-case-templates-for-the-7-pro.1040334/
Click to expand...
Click to collapse
have that psd file its for the clear case back side only . I wanted the sides also cause i would look odd if sides are transparent and back has full design(white background) that is why i am looking vinyl cut template with sides
got?
Related
For anyone with the Spigen Ultra Hybrid case, you'll have noticed that the case came with two cutouts to cover the clear backing.
If anyone is interested in creating a custom back image, I have created a template (PSD) which you can just add your design in and print.
Simply put your design under the initial layer, align/fit your design to your liking and that's it!
An example has been attached as well as a zipped version of the PSD.
Enjoy
Sweet, I was gonna do this myself but you beat me to it.
Yadao said:
Sweet, I was gonna do this myself but you beat me to it.
Click to expand...
Click to collapse
Haha, yeah I looked around and couldn't find anyone who posted it online so I just made one myself. I got it near perfect, it's basically identical to the cutouts that come with the case. Off by a fraction of a mm if anything.
I was coming on here to share a similar template, but yours is great, good job.
Attached my phone's new skin.
there's a thread for this...
http://forum.xda-developers.com/showthread.php?t=2527376
but thanks DanJRWalsh!
cooooooop said:
I was coming on here to share a similar template, but yours is great, good job.
Attached my phone's new skin.
Click to expand...
Click to collapse
Nice design, looks good
palabook said:
there's a thread for this...
http://forum.xda-developers.com/showthread.php?t=2527376
but thanks DanJRWalsh!
Click to expand...
Click to collapse
Thanks for sharing, I searched it before posting but wasn't able to find it. Most likely because he used the term "backplate"
This one is way better.
DanJRWalsh said:
Nice design, looks good
Thanks for sharing, I searched it before posting but wasn't able to find it. Most likely because he used the term "backplate"
Click to expand...
Click to collapse
Yeah but this template is way better! The other one had multiple small problems.
brssnkl said:
Yeah but this template is way better! The other one had multiple small problems.
Click to expand...
Click to collapse
Could you please state the problems you had as the template i made has been updated to fix a lot of the known problems
ehcool said:
Could you please state the problems you had as the template i made has been updated to fix a lot of the known problems
Click to expand...
Click to collapse
Okay, theres the problems. i.imgur.com/ej9zi16.jpg
And this is 1 to 1 sized comparision with the real thing > i.imgur.com/3SpLBZm.jpg
And this is the comparision with DanJRWalsh's case > i.imgur.com/SerwmxD.jpg
But I like the idea of selling backplates on the ebay. I think you should find some company to cut them and print smt original on them.
Keep the good work.
brssnkl said:
Okay, theres the problems. i.imgur.com/ej9zi16.jpg
And this is 1 to 1 sized comparision with the real thing > i.imgur.com/3SpLBZm.jpg
And this is the comparision with DanJRWalsh's case > i.imgur.com/SerwmxD.jpg
But I like the idea of selling backplates on the ebay. I think you should find some company to cut them and print smt original on them.
Keep the good work.
Click to expand...
Click to collapse
Thanks for the feedback the reason those its are "rough" is because when the backplate is placed with the case they are not seen the and i can promise you when the backplate is printed out as is "windows printing issues aside" the template fits perfectly when cut out, So i hope i addressed the concerns you have
EDIT: I reviewed those images again and my original template looked the same on the pc screen as Dans one but when printed out the camera cutout was too far down this was the reason for me producing a new version of it with all the changes
Thanks for the Support anyway
Hey there,
Great work with the template, it fits perfectly in the case!
I took the freedom to modify the template a bit to include a printable border (for white designs) and a layer that shows the actual visible area of the back window.
Before printing remember to hide the "Visible Area" layer.
Also, all of the elements are saved as Patterns so you can modify or fill them the way you want.
The template is in GIMP .xcf format as I don't have PS.
Cheers
Thanks for the template, i was thinking of doing one myself, might stick a few on an a4 page and get them printed out in one go in high quality.
I messed around with one of the spare prints that came with mine and i stickerbombed it and trimed it for the camera and sides. Heres the results ill post my ones i get printed as soon as i do them up.
rastacre said:
Hey there,
Great work with the template, it fits perfectly in the case!
I took the freedom to modify the template a bit to include a printable border (for white designs) and a layer that shows the actual visible area of the back window.
Before printing remember to hide the "Visible Area" layer.
Also, all of the elements are saved as Patterns so you can modify or fill them the way you want.
The template is in GIMP .xcf format as I don't have PS.
Cheers
Click to expand...
Click to collapse
Hello, thanks to both (you and OP) for your work.
Is it possible to export your template to a photoshop format using gimp?
Edit: Autocorrect
awesome job man .. i tried and tried to get the other templet to work but had no luck. I stumbled across this thread and everything is working like a charm.
LuisLAN said:
Hello, thanks to both (you and OP) for your work.
Is it possible to export your template to a photoshop format using gimp?
Edit: Autocorrect
Click to expand...
Click to collapse
Hey there,
Here's mine in PDS format, which I exported from Gimp, but I have no clue how well it'll work on PS.
Cheers
View attachment N5.cover.template.V2.psd.zip
rastacre said:
Hey there,
Here's mine in PDS format, which I exported from Gimp, but I have no clue how well it'll work on PS.
Cheers
View attachment 2541947
Click to expand...
Click to collapse
Thanks. I'll make a test and you know how it went
Awesome template
DanJRWalsh said:
For anyone with the Spigen Ultra Hybrid case, you'll have noticed that the case came with two cutouts to cover the clear backing.
If anyone is interested in creating a custom back image, I have created a template (PSD) which you can just add your design in and print.
Simply put your design under the initial layer, align/fit your design to your liking and that's it!
An example has been attached as well as a zipped version of the PSD.
Enjoy
Click to expand...
Click to collapse
I just wanted to thank you so much for the template, it's great.
I've done some on my own now and I thought I should come back here and share them with everyone, so
I'm attaching a link to the google drive folder where I have the cut outs and also the psd file. Hope you like them, feel free to use and modify them as you wish.
https://drive.google.com/#folders/0ByMIGZCji5P-TXQtTllUNzRyb0U
This cutout is fantastic!! thank you!
here's a cuban flag for you
Hey guys can u please build me this template:
http://forum.xda-developers.com/showthread.php?p=51181882
Thanks in advance
Sent from my Nexus 5
Help bump
Sent from my Nexus 5
Hey Guys
Ringke was so nice to include a plastic cutting tool to make diy backplates and customize our phones. the problem is that you have to trace it maually every time you make a new picture. so I made a photoshop template to solve this problem.
It is pretty simple to use.
first of all extract the zip file.
1. Open the Ringke_fusion_template.psd in photoshop (if you don't own photoshop, either use the demo version or gimp which is free and open source should work too).
2. Select the "Image" Layer.
3. Drag and drop the image you want to use into photoshop.
4. Now you can resize and move the image how you like (if you hold down the shift key while resizing, the image doesnt get stretched).
5. Hit the confirm Button on the top right.
6. Press Ctrl+P to print out the document.
Make sure that scale to fit media is unchecked and scale is set to 100%!
that's it, just cut it out along the black border. make sure you cut off all the black border to make it fit perfectly. If oyu need help just ask or refer to this thread (Basically the same just for the spigen).
Post some results
Ringke Fusion Pattern V2
I modify the templete for better understanding of the pattern.
do please see attach file.
Good stuff thanks
MinatoNamikaze said:
I modify the templete for better understanding of the pattern.
do please see attach file.
Click to expand...
Click to collapse
yeah i know i could have used a clipping mask but i wanted the background to be white if you insert an image with transparency so i thought this was just the easier method.
What are the odds of getting a nexus 4 template?
We have a thread for the Spigen one we should have a thread for people to upload ringke ones for people
Done
http://forum.xda-developers.com/nexus-4/accessories/ringke-fusion-diy-photoshop-template-t2759833
I have made some templates but haven't printed them since i don't have printer.I have modified template slightly to make it 4R photo print.I will be getting them as photo from print shop .Check out my templates here http://forum.xda-developers.com/goo...s/share-ringke-fusion-prints-t2547963/page3.I will add some more later.
---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------
Roxas598 said:
We have a thread for the Spigen one we should have a thread for people to upload ringke ones for people
Click to expand...
Click to collapse
We already have one http://forum.xda-developers.com/google-nexus-5/accessories/share-ringke-fusion-prints-t2547963
somebody have the psd for ringke with "Nexus" font hole ??
Nexus 5 Camera Hole Cutout
guys Can Some body help me in guiding me how to cut the camera hole perfectly cause mine goes shabby sometimes
Never mind, wrong forum.
I'm getting a HTC One (Silver or Black), and a toastmade wood skin.
Was wondering if anyone here is willing to post a picture of their phone with the skin on it to see what color/wood combination would look the best.
So far I'm feeling black/walnut, silver/bamboo
jammC said:
I'm getting a HTC One (Silver or Black), and a toastmade wood skin.
Was wondering if anyone here is willing to post a picture of their phone with the skin on it to see what color/wood combination would look the best.
So far I'm feeling black/walnut, silver/bamboo
Click to expand...
Click to collapse
Getting mine soon
jammC said:
I'm getting a HTC One (Silver or Black), and a toastmade wood skin.
Was wondering if anyone here is willing to post a picture of their phone with the skin on it to see what color/wood combination would look the best.
So far I'm feeling black/walnut, silver/bamboo
Click to expand...
Click to collapse
I have Silver/Walnut. I only installed the back.
DavidKotzebue said:
I have Silver/Walnut. I only installed the back.
Click to expand...
Click to collapse
Share a link where it is sold
Dnpech said:
Share a link where it is sold
Click to expand...
Click to collapse
http://toastmade.com/HTC_One.html
DavidKotzebue said:
http://toastmade.com/HTC_One.html
Click to expand...
Click to collapse
This stickers on the phone or bumper?
Dnpech said:
This stickers on the phone or bumper?
Click to expand...
Click to collapse
The pieces adhere directly to the phone with a 3M film. I only applied the back piece and not the sides, etc. Really doesn't provide much protection, I simply liked using wood and the aesthetics.
That looks really good, is it easily removable with no residue?
itsregie said:
That looks really good, is it easily removable with no residue?
Click to expand...
Click to collapse
Sigh.
I got mine today. I slightly misaligned the back plate on mine, and did not even push down on it. I tried to readjust it with no luck. I then heated it up with a blow dryer to fully remove it - I pulled a bit of the corner up and I immediately saw that this was not gonna be possible. There was going to be a TON of residue left on the back of my phone if I tried to fully take it off.
I'm extremely disappointed. Not at the product, but at myself and also how much of a hassle it is to remove it.
-The skin does look great if applied on correctly.
-Not sure if it's worth the $30 or not yet.
-The removal process is much harder than the site/packaging says it is.
I have a transparent back cover for my Note 10+ and I'm looking for a PSD template to put a sticker or a drawing between cover and back of phone.
Does someone know where I can find this template with the good dimensions for the camera hole ?
Thanks
i actually just started thinking about doing this. Did a quick search online to see if anyone else had done one. Did you have any luck? If i cant find one, ill try to make one this week if you still need this.
i tried to find over the net but nothing
I am really interested if you can create it for the Note10+
Thanks in advance.
Try https://www.thingiverse.com/thing:4021955 is the closest that i've found.
Thanks but I don't want a 3D file for a cover but a 2D picture with holes for cameras to insert a picture or a photo between my transparent case and my phone.
Calimero Oeuf said:
I have a transparent back cover for my Note 10+ and I'm looking for a PSD template to put a sticker or a drawing between cover and back of phone.
Does someone know where I can find this template with the good dimensions for the camera hole ?
Thanks
Click to expand...
Click to collapse
Do you mean this? https://forum.xda-developers.com/showpost.php?p=81201503&postcount=9
Calimero Oeuf said:
I have a transparent back cover for my Note 10+ and I'm looking for a PSD template to put a sticker or a drawing between cover and back of phone.
Does someone know where I can find this template with the good dimensions for the camera hole ?
Thanks
Click to expand...
Click to collapse
Here, in "material & design", there is "print 3D model" - not sure how good it is though:
https://www.kimovil.com/en/where-to-buy-samsung-galaxy-note10-plus
mzsquared said:
Here, in "material & design", there is "print 3D model" - not sure how good it is though:
https://www.kimovil.com/en/where-to-buy-samsung-galaxy-note10-plus
Click to expand...
Click to collapse
No, we just have width and height of device, no camera hole positions
OK I did it by myself
View attachment 4922913 View attachment 4922915
Enjoy !
Please share yours !
is the mockup still available?
I love skins they are protective and thin. But I haven't found any for this phone yet. I may have to order vinyl and cut my own
Looking for full body transparent skin, but can't find any. There is a back transparent film from a brand called imak. Ordered it, but will take some time to arrive.
https://www.xtremeskins.co.uk/products/sony-xperia-5-ii-skins
Finneri said:
https://www.xtremeskins.co.uk/products/sony-xperia-5-ii-skins
Click to expand...
Click to collapse
Oh heck yes thanks friend!!!
eqbirvin said:
I love skins they are protective and thin. But I haven't found any for this phone yet. I may have to order vinyl and cut my own
Click to expand...
Click to collapse
I put in a request with Dbrand a bit ago, but they said they have no plans to support this device unfortunately. Depending on popularity they might change that. Go and request it your self on their contact page, they have a device request form.
Jayram2000 said:
I put in a request with Dbrand a bit ago, but they said they have no plans to support this device unfortunately. Depending on popularity they might change that. Go and request it your self on their contact page, they have a device request form.
Click to expand...
Click to collapse
I put the same request and got the same response. When we combine that with the fact that this is a Sony phone, the result is no skins from Dbrand, ever.
At least Xtremeskins got us covered??
Yeah I submitted a request a couple weeks ago with the same response. Xtreme skins it is.
Finneri said:
https://www.xtremeskins.co.uk/products/sony-xperia-5-ii-skins
Click to expand...
Click to collapse
Does this include sides? Seems to be only the rear.
viperc said:
Does this include sides? Seems to be only the rear.
Click to expand...
Click to collapse
Back only.
Finneri said:
https://www.xtremeskins.co.uk/products/sony-xperia-5-ii-skins
Click to expand...
Click to collapse
Finneri said:
Back only.
Click to expand...
Click to collapse
I see, thanks. I got the below for back transparent film. Works ok. I'm looking for side films though.
https://a.aliexpress.com/_mNHCAud
I'm going to oder from xtremeskins
Jayram2000 said:
I put in a request with Dbrand a bit ago, but they said they have no plans to support this device unfortunately. Depending on popularity they might change that. Go and request it your self on their contact page, they have a device request form.
Click to expand...
Click to collapse
Forget about Dbrand. We support the devices they do and don't do
just hear to see if someone finds a full wrap or one with sides.
Xtreme_Skins said:
Forget about Dbrand. We support the devices they do and don't do
Click to expand...
Click to collapse
And beware of these skins too for this phone. Almost impossible to get smooth edges with these skins. I had to install the skin maybe one mm short on each side and then tried to smooth the middle part. If you just stick the skin on like normally would do, the skin goes beyond the edge of the back and frame and will stay very sharp to the hand. 2 stars.
Also, do not buy the Modern Oak skin if you want the same looking skin that is displayed on the webpage. Very, very different in real life. Went straight to trash.