From what I managed to do and it turned out (as far as I have free time, I will try to complement this mod), In the "dialer", the option of choice, the maximum screen brightness and the selection of the window with the incoming one are added. Added selection, vibro to unlock, extended battery selection, battery position on the right / left side, togla, so far only managed to overcome in the open state (4-6), weather in the curtain, desktop slightly modified, icons slightly increased, clock and battery in the status bar, notifications in the status bar are slightly shifted closer to each other, three weather widgets with a clock from the worlds firmware, an iconopak with multi-room firmwares added.
Download TWRP: https://drive.google.com/file/d/1-6KPA3ZUKAuSscDr1binwUfb95lC82E0/view?usp=drivesdk
Download module magisk: https://drive.google.com/file/d/1-UlsmnqmUY8HmdT1idhUb-ZmeZZ-EPW-/view?usp=drivesdk
Download 10.3.12: https://drive.google.com/file/d/1-_n9nZ0sLb121WVYJpOlwP5xfOpRYt0X/view?usp=drivesdk
10.3.15 Changes Added adjustment of the size of the clock and battery, the clock in the center. The vibration to unlock has moved to the point of sound and vibration.
Download: https://mega.nz/#!3iw1yCzT!81WISiuz1v6f3WsZ1XIgc-KgiJuYJdca2_IISy8ggkE
11.0.3.0.
1. Phone: maximum brightness and a choice of a window when entering, an enlarged round photo and complete absence if a photo is not installed on the contact.
2. Expanded sound bar, vibro to fingerprint.
3. Adjusting the number of toggles in the blind and adjusting the size of the clock and percent of the battery.
4. Three weather widgets.
Photo & Download @modmI9TK20
11.0.2 miui 11 android 10 Q link https://forum.xda-developers.com/showpost.php?p=81171255&postcount=77
11.0.4 Added the ability to set 10 seconds to display notifications in the AOD https://forum.xda-developers.com/mi-9t/themes/minimode-xiaomi-eu-10-3-9-0-t3949340/post81865115
11.0.6 Changes: Removed full-screen photo, it works not correctly. Number of icons in 4x6 folders.
https://forum.xda-developers.com/mi-9t/themes/minimode-xiaomi-eu-10-3-9-0-t3949340/post82249497
Update 10.3.12
Changes: Added advanced sound setting, slightly changed the curtain.
For those who need a module, disassemble the previous one with any archiver and delete the system folder, take the same folder from the updated mod and drop it into the module. Remove the previous mod, reload and flash the new one that you have converted.
Can I flash this over mi-globe 10.3.12 as well?
How do I flash this ?
FroZine said:
Can I flash this over mi-globe 10.3.12 as well?
How do I flash this ?
Click to expand...
Click to collapse
You can try, but just in case, either make a backup with the system or pull out of your firmware 5 apk (IncalUI, MiuiHome MiuiSystemUI, Settings, TeleService) and 2 jar (framework.jar, services.jar) replace them in my mod it will be your rollback mod.
I simply flashed the TWRP mod but nothing seems to be changed. Am i doing something wrong?
uwe129 said:
I simply flashed the TWRP mod but nothing seems to be changed. Am i doing something wrong?
Click to expand...
Click to collapse
mounted system?
Xiaomi.eu_10.3.12.zip - is this for twrp or magisk??
Nexus5-32GB said:
Xiaomi.eu_10.3.12.zip - is this for twrp or magisk??
Click to expand...
Click to collapse
TWRP
FroZine said:
Can I flash this over mi-globe 10.3.12 as well?
How do I flash this ?
Click to expand...
Click to collapse
Are you sure there is a 10.3.12 global stable?!
There are:
China stable: V10.3.12.0.PFJCNXM MD5: 54a3ff575a9f4789001ca0d4516ae335
Global stable: V10.3.9.0.PFJMIXM MD5: 1b6f5bc7ca756ef9e0af6e04da05f5bb
EU stable: V10.3.12.0.PFJCNXM MD5: 4d6cdb6460a3e85f0523baab9127c72b
(there is also a Global stable: V10.3.10.0.PFJEUXM MD5: 01dbcd66d8d53ab8e2a98b2474d38153 for davinci_eea devices)
Cheers.
fabsen said:
Are you sure there is a 10.3.12 global stable?!
There are:
China stable: V10.3.12.0.PFJCNXM MD5: 54a3ff575a9f4789001ca0d4516ae335
Global stable: V10.3.9.0.PFJMIXM MD5: 1b6f5bc7ca756ef9e0af6e04da05f5bb
EU stable: V10.3.12.0.PFJCNXM MD5: 4d6cdb6460a3e85f0523baab9127c72b
(there is also a Global stable: V10.3.10.0.PFJEUXM MD5: 01dbcd66d8d53ab8e2a98b2474d38153 for davinci_eea devices)
Cheers.
Click to expand...
Click to collapse
Mi Globe is a own rom like xiaomi.eu one. Mi-Globe's rom is based on xiaomi.eu rom. And I think that xiaomi.eu is based on eu stable
FroZine said:
Mi Globe is a own rom like xiaomi.eu one. Mi-Globe's rom is based on xiaomi.eu rom. And I think that xiaomi.eu is based on eu stable
Click to expand...
Click to collapse
Ah, my bad. I've read "global" instead of "globe". What do you mean with "eu stable"? EEA? And what about widevine L1? On xiaomi.eu you are stuck on L3
fabsen said:
Ah, my bad. I've read "global" instead of "globe". What do you mean with "eu stable"? EEA? And what about widevine L1? On xiaomi.eu you are stuck on L3
Click to expand...
Click to collapse
Ok sorry its based on China Stable. Dont know about widevine. I watch Netflix and Amazon Prime in Full HD with ease. (Didnt find Netflix in the AppStore so I downloaded the .apk and installed it)
FroZine said:
Ok sorry its based on China Stable. Dont know about widevine. I watch Netflix and Amazon Prime in Full HD with ease. (Didnt find Netflix in the AppStore so I downloaded the .apk and installed it)
Click to expand...
Click to collapse
Can you send a proof? No offense but.... China ROM for mi9t/k20 doesn't have widevine support at all, so it's L3 in best case. You cannot watch HD with L3, no matter what you do. You didn't find the app because it's listed as "non-compatible" in playstore if you use EU or china rom. Just download DRM Info from playstore and check "Security Level". I think it'll say "L3" which means you watch Netflix and Amazon in 480p
If it's "L1" it would be also important to know why :fingers-crossed:
fabsen said:
Can you send a proof? No offense but.... China ROM for mi9t/k20 doesn't have widevine support at all, so it's L3 in best case. You cannot watch HD with L3, no matter what you do. You didn't find the app because it's listed as "non-compatible" in playstore if you use EU or china rom. Just download DRM Info from playstore and check "Security Level". I think it'll say "L3" which means you watch Netflix and Amazon in 480p
If it's "L1" it would be also important to know why :fingers-crossed:
Click to expand...
Click to collapse
Its L3 I checked the drm info. It's looking so crisp for 480p lol.
FroZine said:
Its L3 I checked the drm info. It's looking so crisp for 480p lol.
Click to expand...
Click to collapse
Dayum :crying: I thought you found the ultimate solution
Indeed 480p is good enough for a 6" display. But if you know that you can't watch HD just because of the DRM sh*t, it drives you crazy.
For those who want to flash on the mi-glob, they should be similar to eu but the backup system is better done
fayzrus said:
For those who want to flash on the mi-glob, they should be similar to eu but the backup system is better done
Click to expand...
Click to collapse
And you don't have the Xiaomi 'spy demon'
FroZine said:
And you don't have the Xiaomi 'spy demon'
Click to expand...
Click to collapse
?? I do not understand you, who do we have? if there were no rom eu, I would make a mod
@fayzrus hi friend, could you create a magisk module instead of TWRP one for 10.3.12 if it is possible? Magisk module would be much more convenient to rollback if some issues will appear
bigorbi said:
@fayzrus hi friend, could you create a magisk module instead of TWRP one for 10.3.12 if it is possible? Magisk module would be much more convenient to rollback if some issues will appear
Click to expand...
Click to collapse
Unfortunately, I do not have infinitely available memory, there is a module for 10.3.9. download it, download the mod for 10.3.12, remove the system folder from the mod 10.3.12 with the archiver and replace it in the module for 10.3.9
Related
Hello everybody!
This patch is for getting the notch working on treble roms.
- Tested on PHH Treble (9.0)
Manual:
Mount system and vendor in TWRP
adb push treble-overlay-xiaomi-mi8.apk /vendor/overlay/treble-overlay-xiaomi-mi8.apk
adb push treble-overlay-xiaomi-mi8.apk /system/overlay/treble-overlay-xiaomi-mi8.apk
Download: treble-overlay-xiaomi-mi8.apk
To fix the crappy sound:
- Reboot into TWRP
- Mount vendor
- Use file manager to remove the whole soundfx direcory (/vendor/lib64/soundfx)
To fix NFC:
- Download the zip (over here)
- Reboot into TWRP
- Mount vendor
- Flash the zip
Current bugs on phh-treble (9.0) :
- Fingerprintscanner pretend to be an enter / select key.
- Camera is not yet the quallity of the stock MIUI
- Hotspot is not working (Bluetooth thering does work)
PS:
If you find something to patch, let me now!
Also if you got a patch, be nice to share it
is there treble roms wotking for our mi8?
Vihru said:
is there treble roms wotking for our mi8?
Click to expand...
Click to collapse
All treble roms will work on Mi 8, because it's launched with Android 8.0 or higher.
The Mi 8 is an A-Only version, so you have the flash the A-only image
It's only possible some features wont work, like wifi, camera and fingerprint scanner.
I use the PHH Treble (9.0) rom and I'm really satisfied
Still waiting on my Mi 8 to arrive, but I'm glad you figured out how to implement the notch! mind sharing an image of what the notifications look like now? does it have the overflow dot when the notifications exceed the room?
Thank you, this works great
EErez said:
Still waiting on my Mi 8 to arrive, but I'm glad you figured out how to implement the notch! mind sharing an image of what the notifications look like now? does it have the overflow dot when the notifications exceed the room?
Click to expand...
Click to collapse
At the moment I have no notifications, so I will wait for notifications and make a screen of it! :laugh:
EDIT:
I've got enough notifications to make a screen of it!
Thanks, appreciate it. looks good, only problem is now that the clock is on the left there is only room for 2 notifications it seams. Wonder if there is any way to move the clock back to the right to make more room?
EErez said:
Thanks, appreciate it. looks good, only problem is now that the clock is on the left there is only room for 2 notifications it seams. Wonder if there is any way to move the clock back to the right to make more room?
Click to expand...
Click to collapse
It's for now possible with an Substratum theme to move the clock to the position you want.
Here is the link to the theme: StatusBar Clock
It works on the Mi 8
NielsvdS said:
At the moment I have no notifications, so I will wait for notifications and make a screen of it! :laugh:
EDIT:
I've got enough notifications to make a screen of it!
Click to expand...
Click to collapse
Oh how you get wifi working? Any patch?
xdamami said:
Oh how you get wifi working? Any patch?
Click to expand...
Click to collapse
I've installed the phh-treble over MIUI, I've did a factory reset with TWRP and flashed the system with the phh-treble image
i need guide install rom treble on Mi8, share me plz
Ziarrr said:
i need guide install rom treble on Mi8, share me plz
Click to expand...
Click to collapse
same. I've never touched treble before. I'm using xiaomi.eu rom at the moment but i'd much rather get away from miui to something more stock. Also does Xposed work?
NielsvdS said:
All treble roms will work on Mi 8, because it's launched with Android 8.0 or higher.
The Mi 8 is an A-Only version, so you have the flash the A-only image
It's only possible some features wont work, like wifi, camera and fingerprint scanner.
I use the PHH Treble (9.0) rom and I'm really satisfied
Click to expand...
Click to collapse
Are there any bugs that u are facing?
bassbounce said:
Are there any bugs that u are facing?
Click to expand...
Click to collapse
Only the annoying soundbug with notification and alarm sounds, the other are fixed by ViperFX 1.7
Also the fingerprint sensor pretends to be the enter of the select key.
I have to figure it out where it is going wrong, so I can fix it with an other patch :good:
Ziarrr said:
i need guide install rom treble on Mi8, share me plz
Click to expand...
Click to collapse
Tomorrow I will make a guide!
I also had to figure it out what to do and I have been stuck, so it's nice to share my experience with installing a full treble rom.
Can we all do this using TWRP or we need a PC?
Wow this is great ! Could very well be the first ever custom rom for Mi 8?
Can you list all working and non-working features on your Treble ROM?
samwise110712 said:
Can we all do this using TWRP or we need a PC?
Click to expand...
Click to collapse
It is possible! download the apk.
Reboot into recovery, just mount system and vendor in TWRP
Use the filemanager in TWRP:
- Copy the apk from your internal storage
- Paste it at /vendor/overlay
- Copy the apk again
- Paste /system/overlay
NielsvdS said:
It is possible! download the apk.
Reboot into recovery, just mount system and vendor in TWRP
Use the filemanager in TWRP:
- Copy the apk from your internal storage
- Paste it at /vendor/overlay
- Copy the apk again
- Paste /system/overlay
Click to expand...
Click to collapse
Thanks!
What about camera quality in treble roms? ist it good or much worse than on miui roms?
Hi Guys, here you can find link (tested) to make our Mi Mix 3 PERFECT!
Any other suggest in comments are welcome! (first of all you need to unlock bootloader)
-last update 19/01/2019-
Last TWRP (unofficial atm but works):
https://androidfilehost.com/?fid=11410963190603869442
Last working Magisk:
https://www.mediafire.com/file/ko6og7ndl4k57fq/Magisk-v17.3.droidfeats.com.zip
Last Miui Multilanguage beta ROM 9.1.17:
https://androidfilehost.com/?fid=11410963190603903386
Last modified Status Bar with centered Clock 9.1.17 (twrp install):
https://goo.gl/qWPLjB
My favourite Navigation "hide" bar:
Fluid N.G. from App Store
Last working GCAM with night mode (remove previous version before):
https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_MI8_V2b_plus3.apk
increase a bit the volume (Magisk module):
https://drive.google.com/file/d/1BBVR1xG8NWZWerbMupPNHRXUhc3uZIGf/view
Fingerprinte gestures app:
Looking for a working one.... Stay tuned, if you have to suggest, you are welcome
In settings -> screen -> turn on "Ambient Screen"
Does Safety net pass in magisk?
Edit - Ignore question.
This is not the Global ROM, it's the EU ROM based on Chinese ROM. Suggest you update OP to avoid confusion
Mackay53 said:
Does Safety net pass in magisk?
Edit - Ignore question.
This is not the Global ROM, it's the EU ROM based on Chinese ROM. Suggest you update OP to avoid confusion
Click to expand...
Click to collapse
EU ROM runs great, what are the advantages of running the global version? I don't pay much attention to the Chinese or Dev or Stable or Global so I'm curious.
954wrecker said:
EU ROM runs great, what are the advantages of running the global version? I don't pay much attention to the Chinese or Dev or Stable or Global so I'm curious.
Click to expand...
Click to collapse
Global has google properly integrated, less crap, usually feels smoother, apps slightly different (browser being an example), features can vary
Mackay53 said:
Global has google properly integrated, less crap, usually feels smoother, apps slightly different (browser being an example), features can vary
Click to expand...
Click to collapse
Hi, this rom have all, google properly integrated (from play store to google pay), and do Safety net pass in Magisk. I suggest Magisk 17.3 and last Magisk Manager 6.1 (attention: doesn't accept to upgrade to Magisk 18.0 at the moment)
Thanks
Carlo
CarloBello said:
Hi, this rom have all, google properly integrated (from play store to google pay), and do Safety net pass in Magisk. I suggest Magisk 17.3 and last Magisk Manager 6.1 (attention: doesn't accept to upgrade to Magisk 18.0 at the moment)
Thanks
Carlo
Click to expand...
Click to collapse
Google is installed but it isn't properly integrated. Global has it baked in and lets you restore backups from setup.
You have to rely on miui cloud on EU ROM and that takes ages
Mackay53 said:
Google is installed but it isn't properly integrated. Global has it baked in and lets you restore backups from setup.
You have to rely on miui cloud on EU ROM and that takes ages
Click to expand...
Click to collapse
Do you have to suggest a better global beta rom link to download for our Mix 3? I will update the thread after test it
Center clock
When i try to install the center clock, i get an error 7 on my TWRP. Is this because of the fact that this is no official TWRP?
Schumi_wk said:
When i try to install the center clock, i get an error 7 on my TWRP. Is this because of the fact that this is no official TWRP?
Click to expand...
Click to collapse
Something is not matching up between phone and the zip, when this happens you get error 7 in twrp. It's an annoying error
Schumi_wk said:
When i try to install the center clock, i get an error 7 on my TWRP. Is this because of the fact that this is no official TWRP?
Click to expand...
Click to collapse
In TWRP, you must MOUNT System and disable "mount only read system partition"
And be sure to have the 10.1.2 that I have linked, different version will not work right. Is really beautiful with centered clock
Can't get the link for increased volume working... Can you fix link?
knives of ice said:
Can't get the link for increased volume working... Can you fix link?
Click to expand...
Click to collapse
+1 please
Perfect is based on personal taste, id rather have stock android on my phone ¯\_(ツ)_/¯
knives of ice said:
Can't get the link for increased volume working... Can you fix link?
Click to expand...
Click to collapse
Updated now! Thanks
CarloBello said:
Updated now! Thanks
Click to expand...
Click to collapse
No :/
Takumashii said:
No :/
Click to expand...
Click to collapse
probably isn't "refreshed" the cache in your browser, i write here the link: https://goo.gl/DEzNeg
wait 30" to receive the link to download
CarloBello said:
probably isn't "refreshed" the cache in your browser, i write here the link: https://goo.gl/DEzNeg
wait 30" to receive the link to download
Click to expand...
Click to collapse
Thank's
Edit : It's the link for Center Clock, not boost volume :/
Takumashii said:
Thank's
Edit : It's the link for Center Clock, not boost volume :/
Click to expand...
Click to collapse
Ignore this, made an error
Mackay53 said:
Ignore this, made an error
Click to expand...
Click to collapse
Can't flash it on last EU
Takumashii said:
Thank's
Edit : It's the link for Center Clock, not boost volume :/
Click to expand...
Click to collapse
Stereo Magisk Module to increase a bit the volume, updated the link in OP: https://drive.google.com/file/d/1BBVR1xG8NWZWerbMupPNHRXUhc3uZIGf/view
Hi All -
Just wanted to make a thread here to link to the Magisk Module I created that bypasses the bootloop we get when we have CN hardware with the Global Rom. I think this will work for India and Russia hardware too. Enjoy.
https://forum.xda-developers.com/apps/magisk/module-xiaomi-global-rom-cn-hardware-t3899316
PWn3R said:
Hi All -
Just wanted to make a thread here to link to the Magisk Module I created that bypasses the bootloop we get when we have CN hardware with the Global Rom. I think this will work for India and Russia hardware too. Enjoy.
https://forum.xda-developers.com/apps/magisk/module-xiaomi-global-rom-cn-hardware-t3899316
Click to expand...
Click to collapse
Thanks for this! Have you tested this to make sure stock camera still works without any issue?
xterminater07 said:
Thanks for this! Have you tested this to make sure stock camera still works without any issue?
Click to expand...
Click to collapse
Mine never stopped working before, however, this works completely differently. This inserts a script into the boot process that happens before the device starts launching system services that changes the ro.boot.hwc and ro.boot.hwcountry to be "global". The other way I was doing it was to make the product props to a value that would make it skip the checks entirely. Unfortunately, changing that value removed the slider settings, broke the slider camera, and for some, stopped the stock camera from working. I have checked an all expected settings are in the menu, safetynet passes, the slider works, the stock camera works.
Great, all works, no problem with camera or slider settings.
PWn3R said:
Mine never stopped working before, however, this works completely differently. This inserts a script into the boot process that happens before the device starts launching system services that changes the ro.boot.hwc and ro.boot.hwcountry to be "global". The other way I was doing it was to make the product props to a value that would make it skip the checks entirely. Unfortunately, changing that value removed the slider settings, broke the slider camera, and for some, stopped the stock camera from working. I have checked an all expected settings are in the menu, safetynet passes, the slider works, the stock camera works.
Click to expand...
Click to collapse
Eggcellent!!! lol... so just flash with twrp and that's it?
Yes, flash Magisk, 18.0 and 18.1 don't work for me. Use 17.3 and then flash this and you should be golden.
i dont know who created this, but this was shared on a Mi Mix3 FB group from PH.
Magisk-v18.1_mix3专版
bluviper said:
i dont know who created this, but this was shared on a Mi Mix3 FB group from PH.
Magisk-v18.1_mix3专版
Click to expand...
Click to collapse
does this work on chinese device with chinese rom or xiaomi eu rom?
I have got it working on chinese device with xiaomi.eu rom.
xterminater07 said:
does this work on chinese device with chinese rom or xiaomi eu rom?
Click to expand...
Click to collapse
I can confirm that works, I already flashed
Inviato dal mio MIX 3 utilizzando Tapatalk
yes, its working on EU ROM coz im on Mi-Globe which is based on EU ROM.
bluviper said:
yes, its working on EU ROM coz im on Mi-Globe which is based on EU ROM.
Click to expand...
Click to collapse
Why would you use it on the EU/Mi-Globe?
Mackay53 said:
Why would you use it on the EU/Mi-Globe?
Click to expand...
Click to collapse
before, V18.0 wont work with mix3.
no matter how you install it. only 17.3 works
as of the moment, since the week before the Chinese New Year, there are no updates from mi-globe. until this weekend. so this is a good alternative to make v18 work with mix3.
bluviper said:
before, V18.0 wont work with mix3.
no matter how you install it. only 17.3 works
as of the moment, since the week before the Chinese New Year, there are no updates from mi-globe. until this weekend. so this is a good alternative to make v18 work with mix3.
Click to expand...
Click to collapse
What benefits do v18 make over v17.3?
Mackay53 said:
What benefits do v18 make over v17.3?
Click to expand...
Click to collapse
Other than a new magisk manager interface I don't notice any difference.
954wrecker said:
Other than a new magisk manager interface I don't notice any difference.
Click to expand...
Click to collapse
That's what I was thinking but people seem to really want to install it, I'm still on 17.1 as that's what comes with twrp.
I haven't tested 18.1 as posted above, but 17.3 is the latest working released version for global.
PWn3R said:
I haven't tested 18.1 as posted above, but 17.3 is the latest working released version for global.
Click to expand...
Click to collapse
Most people on telegram are now using 18.1 , apparently support for modules will end soon for 17.
The released 18.0 and 18.1 do not work on the mix 3. I have no idea if the one linked above does, but I also don't know what they modified which is why I was advising 17.3
Sent from my Mi MIX 3 using Tapatalk
PWn3R said:
The released 18.0 and 18.1 do not work on the mix 3. I have no idea if the one linked above does, but I also don't know what they modified which is why I was advising 17.3
Sent from my Mi MIX 3 using Tapatalk
Click to expand...
Click to collapse
its working. some of the others guys here installed it.
they said its working. i for one, installed, and its working.
based on the screen capture i posted. you can see a logo of xda, maybe they are a part of it somehow.
moreover, there are tons of bulleted changelogs for the 18.0 & 18.1
some of them may not be noticeable for a very large audience, but this "i guess" will make it future proof for the reason of rom updates and compatibility. since Android Q is in the works.
also, noticed these changes
Code:
v18.1
- [General] Support EMUI 9.0
- [General] Support Kirin 960 devices
- [General] Support down to Android 4.2
- [General] Major code base modernization under-the-hood
other changes are for MagiskHide, maybe to better hide other apps. because there are some few apps that still can detect rooted devices even if they are HIDDEN.
As i haven't seen anyone posting it on xda, so
A new MIUI 11 debloated rom based on china dev from MI5s port.
Its quite stable.
Changelog:
The first public version of MIUI 11.
Updated IF Design award winning interface design.
Improved transition animations.
Updated Always On Display mode for devices with AMOLED screens: added new styles and animations for notifications.
The Connections section has been updated with MIUI proprietary features: Printing, Broadcasting, and Mi Share.
Added dynamic ringtones.
Added the ability to choose a desktop style: regular and from the application menu.
System optimization. Error correction.
download link :
https://sourceforge.net/projects/miroom/files/9.9.26/Mi5-PORT_MIUI_9.9.26_MiRoom_8.0.0.zip
dev link:
https://portal.mi-room.ru/roms/
Can i flashing with global rom directly?
taka2no said:
Can i flashing with global rom directly?
Click to expand...
Click to collapse
yes. twrp is needed, you can give it a try, but do backup first, remove magisk and all modules. but recommended is clean flash.
I downloaded from mi forum
So far so good everything works like a charm but battery cant last whole day
On 4.4 kernel i can archive 2 day straight without charging, on the same battery unit now
sunilromy said:
yes. twrp is needed, you can give it a try, but do backup first, remove magisk and all modules. but recommended is clean flash.
Click to expand...
Click to collapse
Thanks for your help. ? Right now testing on battery consuming.
Full Screen Gesture
Everything works fine but how to enable full screen gestures?
wildanw2 said:
Everything works fine but how to enable full screen gestures?
Click to expand...
Click to collapse
Go to Setting/Additional Settings/Full Screen display/select full screen gesture
So I've testing ever since and THERE'S HUGE BUG
gyroscope isn't working properly, auto rotate works fine (magnetic sensor)
But when i play games with gyro uses such as PUBG it drift away so hard
Perhaps its caused by broken persist.img ?
Or it caused by the rom itself?
Btw has anyone tried custom kernel in this rom? Core control kinda fu*ked up it closes core 3 even when thermal protection disabled
Samir96 said:
So I've testing ever since and THERE'S HUGE BUG
gyroscope isn't working properly, auto rotate works fine (magnetic sensor)
But when i play games with gyro uses such as PUBG it drift away so hard
Perhaps its caused by broken persist.img ?
Or it caused by the rom itself?
Btw has anyone tried custom kernel in this rom? Core control kinda fu*ked up it closes core 3 even when thermal protection disabled
Click to expand...
Click to collapse
Hello,
I did check gyroscope, its working fine. You can see attached pic. but i dont pubg. I have used various custom roms. i usuallly get 5.30 to 6.30 hrs SOT in customs roms. but in miui roms, mostly i got 5hrs of SOT. but just of camera and stuff, i am using miui. As portrait mode and camera optimization is best in MIUI.
No custom kernel i have tried yet.
Samir96 said:
Go to Setting/Additional Settings/Full Screen display/select full screen gesture
Click to expand...
Click to collapse
There is no such setting on 9.9.26.
Sent from my MI 5 using Tapatalk
wildanw2 said:
There is no such setting on 9.9.26.
Click to expand...
Click to collapse
You sure bro?
sunilromy said:
Hello,
I did check gyroscope, its working fine. You can see attached pic. but i dont pubg. I have used various custom roms. i usuallly get 5.30 to 6.30 hrs SOT in customs roms. but in miui roms, mostly i got 5hrs of SOT. but just of camera and stuff, i am using miui. As portrait mode and camera optimization is best in MIUI.
No custom kernel i have tried yet.
Click to expand...
Click to collapse
I guess so, maybe its Pubg related problem.
Btw for core problem, i use AKT tweak and it solved
Using battery saving mode from AKT give me futher SOT and insane idle time. Highly recommended
And lastly, it seems a lot of apps not being optimized (doze), can be fix by install hidden miui settings app and manually optimize those apps
Samir96 said:
You sure bro?
Click to expand...
Click to collapse
On the previous version, yes there is that setting. After upgraded to 9.9.26, it is disappeared.
Sent from my MI 5 using Tapatalk
wildanw2 said:
There is no such setting on 9.9.26.
Click to expand...
Click to collapse
Its kinda weird because im on eu 9.9.26 beta
hello,
.you need to enable onscreen navigation to show full screen gesture option.
you can manually do it by
root explorer (you need to modify system file)
1. Go to /system/build.prop and add qemu.hw.mainkeys=0
sunilromy said:
hello,
.you need to enable onscreen navigation to show full screen gesture option.
you can manually do it by
root explorer (you need to modify system file)
1. Go to /system/build.prop and add qemu.hw.mainkeys=0
Click to expand...
Click to collapse
It works, thank you.
Sent from my MI 5 using Tapatalk
so. is that a patch for mipay?
Flashing in MI5
You have mentioned that this ROM is for MI5s, will I be able to flash this ROM to my MI5 device?
https://sourceforge.net/projects/mi...5-PORT_MIUI_9.10.10_MiRoom_8.0.0.zip/download
Here is the updated version
kaziupal said:
https://sourceforge.net/projects/mi...5-PORT_MIUI_9.10.10_MiRoom_8.0.0.zip/download
Here is the updated version
Click to expand...
Click to collapse
Changelog???
How to install Xiaomi.eu ROM for POCO M3 [citrus]
We will release fastboot ROM versions until TWRP for surya is released
TWRP is released so latest roms are instaled via TWRP..
Steps to install our ROM for FIRST TIME from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file HERE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system:
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 10min)
Steps to install UPDATE of our ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system:
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
- After reboot its done (first boot may take up to 5min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Xiaomi.eu ROM features
Based on China Stable / Weekly builds (except POCOF1, HMNote6Pro, HMNote8T, HMNote9ProMax, HMNote9Pro_HMNote9S, HMNote9ProEU)
Enabled search gesture (swipe up) on the desktop
3way reboot menu (in dev settings)
Dark Mode (Night Mode) for all devices (In the dev settings except 9.x/10.x)
Removed ads in MIUI system apps
Face Unlock for all devices
Vertical clock widget on lockscreen
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures
AI preloading option in MIUI Lab
Fullscreen gestures
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Removed 5GHz region restrictions
Confirm dials from call logs
Morning report on alarm at morning
More apps supported for AOD notifications
More styles for AOD screen
Raise to wake gesture
AOD notification received animation
Default volume control stream toggle
Tap fingerprint sensor to wake toggle
More Camera features
Double tap to lock screen
Battery AI scenes
Allowed disabling specific system apps
Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Unified flat style app icons for both system and 3rd party apps
Advanced menu with color icons
No any Chinese character under the full system
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Added Screen-OFF animation
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added 3D Touch to MI5S 3GB RAM version
Added GSMalphabet into SMS app options
Added more icons grid layout 4x5, 4x6, 4x7, 5x5, 5x6, 5x7 (depends on device)
SafetyNet passed (Google Pay)
Play Store Certified
Deodexed
Added automated tasks in Security app
Added game speed booster
Added erase module (magic elimination) to Gallery photo edit options
Fixed low volume sound via headphone
Charging screen
And more, and more made by our 9 years MIUI mods experience.
Enjoy..
Does this also apply to the Poco M3 global version? Thank you!
wew very quick tho... Gonna install this when my brother's Poco M3 will arrive... He's an IPhone SE 2020 user and just purchased Poco M3 because he thought the smoothness of the X3 (its 120hz Refresh Rate) (I have Poco X3) will be the same on the M3... he's really obsessed with my X3 tho because i dunno... I was really shocked when he asked me whats the review of the M3, it is good and something like that and finally he said to me he purchased it online like it was nuts! Hahaha
I hope he will not be disappointed by the camera of the Poco M3 and its capabilities...
btw² how you managed to make a debloated rom of Poco M3 afterall like it was released just 1 week ago?
yan2xme said:
wew very quick tho... Gonna install this when my brother's Poco M3 will arrive... He's an IPhone SE 2020 user and just purchased Poco M3 because he thought the smoothness of the X3 (its 120hz Refresh Rate) (I have Poco X3) will be the same on the M3... he's really obsessed with my X3 tho because i dunno... I was really shocked when he asked me whats the review of the M3, it is good and something like that and finally he said to me he purchased it online like it was nuts! Hahaha
I hope he will not be disappointed by the camera of the Poco M3 and its capabilities...
btw² how you managed to make a debloated rom of Poco M3 afterall like it was released just 1 week ago?
Click to expand...
Click to collapse
Coming from a phone that have an A13 Bionic chipset, that was on the last year Iphone flagships to a Poco M3 that have a midrange SD662 from 2019 (technically it's from January 2020, but the performance is equal to SD660 and SD665 from 2019 midranges), will be quite a shock in performance for your brother.
POCO M3 is nothig like the POCO X3, i am sure that your brother was tempted by the 120hz RR, the Poco M3 as peer the reviews cant even push the 1080P screen to display 60FPS.
Fustang said:
Coming from a phone that have an A13 Bionic chipset, that was on the last year Iphone flagships to a Poco M3 that have a midrange SD662 from 2019 (technically it's from January 2020, but the performance is equal to SD660 and SD665 from 2019 midranges), will be quite a shock in performance for your brother.
POCO M3 is nothig like the POCO X3, i am sure that your brother was tempted by the 120hz RR, the Poco M3 as peer the reviews cant even push the 1080P screen to display 60FPS.
Click to expand...
Click to collapse
Haha As writing on this time, my brother has now refused to receive his order online because he was so frustrated that its not as fast as the Poco X3 after viewing MKHBHD's review and he has just shared it to his friends girlfriend so there will be no time wasted ordering again.
Just installed this ROM yesterday. So far the performance is pretty good, I've even rooted with Magisk to debloat further and for some modules I use. The only issue is excluding the dark theme from certain apps, but after searching online it seems to be a known MIUI 12 problem and I was able to work around it.
Great always great roms by eu. Will install as soon as I unlock my bootlaoader hopefuly in a week
RXT00 said:
Just installed this ROM yesterday. So far the performance is pretty good, I've even rooted with Magisk to debloat further and for some modules I use. The only issue is excluding the dark theme from certain apps, but after searching online it seems to be a known MIUI 12 problem and I was able to work around it.
Click to expand...
Click to collapse
Hi @ RXT00 what version of Magisk did you use for root?
RXT00 said:
Just installed this ROM yesterday. So far the performance is pretty good, I've even rooted with Magisk to debloat further and for some modules I use. The only issue is excluding the dark theme from certain apps, but after searching online it seems to be a known MIUI 12 problem and I was able to work around it.
Click to expand...
Click to collapse
Can you help me setting rom eu on the poco M3? I don't understand the way setting ?
theo72 said:
Hi @ RXT00 what version of Magisk did you use for root?
Click to expand...
Click to collapse
I'm using Magisk 20.4 stable. No problems with it so far. Also, to make it simple, I replaced the boot.img in the eu ROM with a Magisk patched one before flashing.
Jackbon said:
Can you help me setting rom eu on the poco M3? I don't understand the way setting ?
Click to expand...
Click to collapse
Do you mean installing the ROM? Have you unlocked your bootloader already?
Do you mean installing the ROM? Have you unlocked your bootloader already?
[/QUOTE]
My phone is not unlocked. Can you give me the poco M3 driver link? I can't find it online to unlock my phone.
Jackbon said:
My phone is not unlocked. Can you give me the poco M3 driver link? I can't find it online to unlock my phone.
Click to expand...
Click to collapse
Download and use Mi Unlock to UNLOCK and/or INSTALL driver your M3
Apply for permissions to unlock Mi devices
en.miui.com
RXT00 said:
I'm using Magisk 20.4 stable. No problems with it so far. Also, to make it simple, I replaced the boot.img in the eu ROM with a Magisk patched one before flashing.
Click to expand...
Click to collapse
Does this mean that you are running unencrypted or is not the case?
just want to know this installation is for China rom only? or global rom too? thanks!
ielvenry said:
just want to know this installation is for China rom only? or global rom too? thanks!
Click to expand...
Click to collapse
I mean... You are installing a new ROM. As long as you have a Poco M3 device, your current ROM does not matter...
You will be installing xiaomi.eu rom, based on chinese stable builds.
KaMyKaSii said:
Does this mean that you are running unencrypted or is not the case?
Click to expand...
Click to collapse
Pretty sure it's still encrypted. I haven't read anything about Magisk removing encryption.
RXT00 said:
I'm using Magisk 20.4 stable. No problems with it so far. Also, to make it simple, I replaced the boot.img in the eu ROM with a Magisk patched one before flashing.
Click to expand...
Click to collapse
Can you explain more clearly? I didn't find boot.img in Magisk .zip file.
DungHD said:
Can you explain more clearly? I didn't find boot.img in Magisk .zip file.
Click to expand...
Click to collapse
Here's the full instructions. https://www.thecustomdroid.com/inst...hing-magisk-patched-boot-image-using-fastboot
After you install the EU rom just follow method 2. You can find the stock boot img inside the EU rom zip file in the firmware-update folder. Just make sure your Magisk app is set to the stable branch v 20.4 I'm not sure if the betas are reliable yet.
Eidenz said:
I mean... You are installing a new ROM. As long as you have a Poco M3 device, your current ROM does not matter...
You will be installing xiaomi.eu rom, based on chinese stable builds.
Click to expand...
Click to collapse
Sorry i dont understand...could be flash on all stock rom?
ninohs said:
Sorry i dont understand...could be flash on all stock rom?
Click to expand...
Click to collapse
When you flash the xiaomi.eu rom, it will replace your current ROM. So whatever if you have a global or european one, it will be replaced with xiaomi.eu.
So it doesn't matter the rom you have, it will work.