The Product
Product Page
CRYSTAL ARMOR Ultra Thin Full Flat Tempered Glass Protector. Claimed to be the worlds thinnest; so thin, in fact, that they claim that a sensor hole cutout is necessary. Of course, it comes at a price. And that is a wallet gouging ¥5,000. Although on the product page they say that the shipping is included, they still said they had to charge me another ¥250. So I ended up paying ¥5,250 for a single sheet of glass...
They seem to have made the shipping free so it is "only" ¥5,000 now which makes me feel ripped off.
UPDATE: It's actually a promotion apparently for this month as their nice rep informed me.
The customer support at Crystal Armor is great. The English support team swiftly answered my inquiries, and even emailed me when I ordered a second one to double check if it was a mistake or not
First Look
It came in a huge box (for a screen protector anyway) with a ton of bubble wrap.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You think I'm kidding?
I tentatively open the package to reveal...
Nothing but the screen protector.
It's packaged nicely and all, but I can't help but feel a bit let down to find nothing else included in a ¥5,000 product. There is only film over the adhesive side of the protector too
Its thinness is something else though. This still has the protective film on.
A quick mockup shows the fitment to be spot on
Anti Shatter Film Removal
I found the corner to be the easiest to lift.
It's just peeling from now on.
Goodbye Sony logo.
Ahhhh, real glass!
I first thought I used too much WD-40 to clean the glass, but it turns out that even nail polish remover wasn't enough. After multiple passes with optical cleaning towel and nail polish remover, the screen only looks clean. A quick wipe with a cheap microfiber towel reveals tons of lint stuck onto the glass, and the glass feels slightly sticky to the touch, especially at the edges. Running water over the glass shows spots at the corners where the residue still remains, as the water flows around the spots.
After more rubbing with nail polish remover the spots seem to have mostly disappeared, but the screen still feels slightly sticky. Maybe the residue will wear off after a week of usage, but so far I have to recommend prospective ASF removers to put a screen protector over the bare glass.
I've given up for now. I'll just install the protector right over without worrying about the residue since it's not visible anyways. I just washed the towels and letting them to dry, and I'll get the protector installed in my washroom after my shower tonight to be as safe as possible. It is an expensive single usage protector after all.
On a side note, if you do this to your dock you'll be able to use it even with a thick screen protector
The Big Mistake
Well I think I've just made the biggest f***up in my Android related life. So badly that I managed to actually crack the glass protector
But instead of mourning for the new wound in my wallet, I'll have to make the best of this broken piece of glass and make a cracked screen protector review until the replacement arrives.
First of all, the screen protector is seriously thin. Keep in mind that this is my first glass screen protector, but this is definitely much thinner than the glass protector that my friend has on his Z1. It's so thin that it still fits in the magnetic charging dock, although I don't recommend this, as the dock scuffs up the rear ASF enough already without the added thickness. The thinness combined with the rounded edges make this feel extremely smooth at the edges, and my fingers glide on and off the edges like its nothing.
Speaking of gliding, the oleophobic coating is nice and slick. I've been rubbing my fingers and palms over it and the coating isn't letting up. I'm sure I've put enough finger oils on it to equal a month's usage and all I've been doing is wiping it off with a shirt and it's still holding up very well.
The size of the screen protector is pretty much exactly the size of the display glass so you must be extremely careful while installing it. Because I ruined mine I just quickly matched 2 edges on one side and put it down. I highly urge everyone to use the masking tape hinge method and take your time to hexacheck for a perfect fitment. Yes you can peel it off and reapply but you have an extremely high chance of cracking your glass. The protector is flexible to a degree but definitely not enough for you to peel it off the screen unless you are some master at peeling off protectors with minimal angle.
My heart bled as I folded this screen protector in half for the sake of science.
As you can see, the protector does not shatter, so it does a perfectly fine job as a replacement for your factory anti shatter film.
In an extreme case of folding in the edge like a page in a book, a very small piece of glass detached itself from the glass but proved to be harmless like the glass particles that also fell out of the cracks.
And of course I had to forget the scratch test. The protector, while having cracks all over, laughed at the futility of the multiple knives from around the house but was ultimately defeated by 150 grit sandpaper which left scratches too small for me to bother to attempt to capture with a camera. Back to the garbage can it goes.
Hope you all benefited from my stupidity and failure. I will now cry myself to sleep. This ends my preliminary review of the Crystal Armor Ultra Thin Full Flat Luxury Edge 0.2mm Screen Protector (WORD’S THINNEST!) with Chemically Strengthened Tempered Glass and Oleophobic Super Slick Surface and I still can’t post external links.
The ASF Free Experience
Feels good to be touching actual glass :angel:
But because there is no coating on the glass, fingerprints and smudges build up very very quickly, and I had to clean it frequently. Because there's no coating on it there's a bit of friction against your fingertips. I'm sure that some Rain-X or some sort of glass sealant will make the screen a lot more smooth (friction wise, there's no texture on the glass obviously).
Now don't expect the display to magically improve without the ASF. It doesn't become more vibrant, bright, or have any better viewing angles.
But don't think that removing the ASF is pretty much pointless and is a stupid move. The ASF is a stupid move. Unless you slap a screen protector over the ASF as soon as you get the phone, you are going to get scratches because the ASF is so soft. So I got fed up with the marks and decided to just remove it. Now you have glass that is actually hard. Some people are just anti-protector and that's perfectly fine. The Dragontrail glass is tough and it's not gonna get scratched that easily. I think running the bare glass with some sort of sealant, oleophobic coating , or a mix you'll have a nice feeling anti-fingerprint glass. Just reapply when the coating wears off.
Round 2
They included a microfiber cloth this time (I wonder if they read my review )
The tab for peeling off the protective film is also a lot easier to peel off this time.
I couldn't use the hinge method to install this protector because the duct tape just won't stick. Not sure if it's a good thing because the coating is strong or if it's a bad thing because I misaligned thanks to not having a hinge.
Also trapped a spec of fiber, which ironically is probably from the microfiber cloth they provided... Luckily it's so small that I can only find it with my face about 8cm from the screen.
Having this protector on is also definitely visible, due to the rounded corners
Also leaks a bit of light at the side like the edge of a lit acrylic panel (reference)
The coating is indeed very smooth in case I haven't mentioned it enough. My fingers glide on it with pretty much no friction, and because the screen is now raised a bit I don't feel the ridge at the end of the screen anymore. And because it's so smooth you don't have to use much force on the screen so it leaves even less marks. All the pictures I've taken are after 1 day of use and no cleaning at all. And I went snowboarding with it and it didn't crack so don't think its weak just because I goofed the first time.
My camera lens is 14-24mm which is useless for macro so here's a video for you guys
You can find it on their site
Short Term Experience
In the first week, it was oleophobic heaven. Super slick, almost completely fingerprint-proof. The few smudges come off extremely easily.
Towards the end of week 2 it has become less oleophobic. It's not extremely slick like new but it is still very good. Smudges and prints come off just from taking the phone out of the pocket.
End of week 3 had me a bit worried. Has the oleophobic coating worn off already? Fingerprints go on pretty easily and it is not very slick. Then I realized that in this entire time I have not once cleaned the screen with any cleaning solution, only wiping it down with a microfiber cloth.
So I did that and the slickness is back. It feels more like week 2... At least for a few days.
So now I clean the screen regularly and when the screen is clean it's much easier to wipe off fingerprints.
TO BE CONTINUED FOR LONG TERM RESULTS
Well thanks to xda rules I can't post any pictures....
And I have to wait 5 minutes between posts...
This is too much for me to take :crying:
Need the pictures. Or just upload it somewhere else, then put the link here. Thanks so much anyway.
Sent from my C6903 using Tapatalk
omegahanggara said:
Need the pictures. Or just upload it somewhere else, then put the link here. Thanks so much anyway.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
xda won't allow external links even to pictures until I get 10 posts, and I can only post once every 5 minutes.
Winrahr said:
xda won't allow external links even to pictures until I get 10 posts, and I can only post once every 5 minutes.
Click to expand...
Click to collapse
ok, so lets keep chatting here untill you get 10 posts!
how was the placing of the screen protector? the nillkin has almost 2 millimiters gaps from the sides so it's quite easy to fit, but it doesn't cover the whole screen though... but still almost all of it, it looks good.
shteren said:
ok, so lets keep chatting here untill you get 10 posts!
how was the placing of the screen protector? the nillkin has almost 2 millimiters gaps from the sides so it's quite easy to fit, but it doesn't cover the whole screen though... but still almost all of it, it looks good.
Click to expand...
Click to collapse
And we shall!
It seems to cover exactly the entire screen but I'll check more precisely when I put it on.
Well I think I've just made the biggest f***up in my Android related life. So badly that I managed to actually crack the glass protector
But instead of mourning for the new wound in my wallet, I'll have to make the best of this broken piece of glass and make a cracked screen protector review until the replacement arrives.
First of all, the screen protector is seriously thin. Keep in mind that this is my first glass screen protector, but this is definitely much thinner than the glass protector that my friend has on his Z1. It's so thin that it still fits in the magnetic charging dock, although I don't recommend this, as the dock scuffs up the rear ASF enough already without the added thickness. The thinness combined with the rounded edges make this feel extremely smooth at the edges, and my fingers glide on and off the edges like its nothing.
(pic)
Speaking of gliding, the oleophobic coating is nice and slick. I've been rubbing my fingers and palms over it and the coating isn't letting up. I'm sure I've put enough finger oils on it to equal a month's usage and all I've been doing is wiping it off with a shirt and it's still holding up very well.
The size of the screen protector is pretty much exactly the size of the display glass so you must be extremely careful while installing it. Because I ruined mine I just quickly matched 2 edges on one side and put it down. I highly urge everyone to use the masking tape hinge method and take your time to hexacheck for a perfect fitment. Yes you can peel it off and reapply but you have an extremely high chance of cracking your glass. The protector is flexible to a degree but definitely not enough for you to peel it off the screen unless you are some master at peeling off protectors with minimal angle.
My heart bled as I folded this screen protector in half for the sake of science.
(pic)
As you can see (well you can't because I only have 9 posts), the protector does not shatter, so it does a perfectly fine job as a replacement for your factory anti shatter film.
In an extreme case of folding in the edge like a page in a book, a very small piece of glass detached itself from the glass but proved to be harmless like the glass particles that also fell out of the cracks.
(pic)
And of course I had to forget the scratch test. The protector, while having cracks all over, laughed at the futility of the multiple knives from around the house but was ultimately defeated by 150 grit sandpaper which left scratches too small for me to bother to attempt to capture with a camera. Back to the garbage can it goes.
Hope you all benefited from my stupidity and failure. I will now cry myself to sleep. This ends my preliminary review of the Crystal Armor Ultra Thin Full Flat Luxury Edge 0.2mm Screen Protector (WORD’S THINNEST!) with Chemically Strengthened Tempered Glass and Oleophobic Super Slick Surface and I still can’t post external links.
Winrahr said:
Well I think I've just made the biggest f***up in my Android related life. So badly that I managed to actually crack the glass protector
But instead of mourning for the new wound in my wallet, I'll have to make the best of this broken piece of glass and make a cracked screen protector review until the replacement arrives.
First of all, the screen protector is seriously thin. Keep in mind that this is my first glass screen protector, but this is definitely much thinner than the glass protector that my friend has on his Z1. It's so thin that it still fits in the magnetic charging dock, although I don't recommend this, as the dock scuffs up the rear ASF enough already without the added thickness. The thinness combined with the rounded edges make this feel extremely smooth at the edges, and my fingers glide on and off the edges like its nothing.
(pic)
Speaking of gliding, the oleophobic coating is nice and slick. I've been rubbing my fingers and palms over it and the coating isn't letting up. I'm sure I've put enough finger oils on it to equal a month's usage and all I've been doing is wiping it off with a shirt and it's still holding up very well.
The size of the screen protector is pretty much exactly the size of the display glass so you must be extremely careful while installing it. Because I ruined mine I just quickly matched 2 edges on one side and put it down. I highly urge everyone to use the masking tape hinge method and take your time to hexacheck for a perfect fitment. Yes you can peel it off and reapply but you have an extremely high chance of cracking your glass. The protector is flexible to a degree but definitely not enough for you to peel it off the screen unless you are some master at peeling off protectors with minimal angle.
My heart bled as I folded this screen protector in half for the sake of science.
(pic)
As you can see (well you can't because I only have 9 posts), the protector does not shatter, so it does a perfectly fine job as a replacement for your factory anti shatter film.
In an extreme case of folding in the edge like a page in a book, a very small piece of glass detached itself from the glass but proved to be harmless like the glass particles that also fell out of the cracks.
(pic)
And of course I had to forget the scratch test. The protector, while having cracks all over, laughed at the futility of the multiple knives from around the house but was ultimately defeated by 150 grit sandpaper which left scratches too small for me to bother to attempt to capture with a camera. Back to the garbage can it goes.
Hope you all benefited from my stupidity and failure. I will now cry myself to sleep. This ends my preliminary review of the Crystal Armor Ultra Thin Full Flat Luxury Edge 0.2mm Screen Protector (WORD’S THINNEST!) with Chemically Strengthened Tempered Glass and Oleophobic Super Slick Surface and I still can’t post external links.
Click to expand...
Click to collapse
It's too bad that you cracked you screen protector, I cheer for you haha.
Well at least if the ultra thin is working like you said, I don't have to fear anything with the 0.33mm one. Thanks! By the way, take time to post one more time and you're good to go with the pictures, show us your baby!
Will be waiting for teh pictures!
Really wanting to buy this, front and back, to replace my <1week old nillkin tempered.
curious
I hope you can post the pics.... so add this reply to the count.:victory:
Boop. 10th post.
OP will now be updated with pictures
I think the greatest weakness of the 0.2mm will be its... weakness. The thinness probably makes it more prone to cracking than the thicker protectors, but it is also probably more flexible, so who knows. It's definitely not super fragile though, I was just being stupid.
Also want to add that the customer support at Crystal Armor is great. The English support team swiftly answered my inquiries, and even emailed me when I ordered a second one to double check if it was a mistake or not :good:
So while I wait for the second protector to come in, I'll be using the phone without an ASF and I'll do a writeup on that in a few days as well.
I still have the cracked protector so if anyone wants me to do some testing with it let me know
Winrahr said:
The Product
CRYSTAL ARMOR Ultra Thin Full Flat Tempered Glass Protector. Claimed to be the worlds thinnest; so thin, in fact, that they claim that a sensor hole cutout is necessary. Of course, it comes at a price. And that is a wallet gouging ¥5,000. Although on the product page they say that the shipping is included, they still said they had to charge me another ¥250. So I ended up paying ¥5,250 for a single sheet of glass...
They seem to have made the shipping free so it is "only" ¥5,000 now which makes me feel ripped off.
UPDATE: It's actually a promotion apparently for this month as their nice rep informed me.
The customer support at Crystal Armor is great. The English support team swiftly answered my inquiries, and even emailed me when I ordered a second one to double check if it was a mistake or not
First Look
It came in a huge box (for a screen protector anyway) with a ton of bubble wrap.
You think I'm kidding?
I tentatively open the package to reveal...
Nothing but the screen protector.
It's packaged nicely and all, but I can't help but feel a bit let down to find nothing else included in a ¥5,000 product. There is only film over the adhesive side of the protector too
Its thinness is something else though. This still has the protective film on.
A quick mockup shows the fitment to be spot on
Anti Shatter Film Removal
I found the corner to be the easiest to lift.
It's just peeling from now on.
Goodbye Sony logo.
Ahhhh, real glass!
I first thought I used too much WD-40 to clean the glass, but it turns out that even nail polish remover wasn't enough. After multiple passes with optical cleaning towel and nail polish remover, the screen only looks clean. A quick wipe with a cheap microfiber towel reveals tons of lint stuck onto the glass, and the glass feels slightly sticky to the touch, especially at the edges. Running water over the glass shows spots at the corners where the residue still remains, as the water flows around the spots.
After more rubbing with nail polish remover the spots seem to have mostly disappeared, but the screen still feels slightly sticky. Maybe the residue will wear off after a week of usage, but so far I have to recommend prospective ASF removers to put a screen protector over the bare glass.
I've given up for now. I'll just install the protector right over without worrying about the residue since it's not visible anyways. I just washed the towels and letting them to dry, and I'll get the protector installed in my washroom after my shower tonight to be as safe as possible. It is an expensive single usage protector after all.
On a side note, if you do this to your dock you'll be able to use it even with a thick screen protector
The Big Mistake
Well I think I've just made the biggest f***up in my Android related life. So badly that I managed to actually crack the glass protector
But instead of mourning for the new wound in my wallet, I'll have to make the best of this broken piece of glass and make a cracked screen protector review until the replacement arrives.
First of all, the screen protector is seriously thin. Keep in mind that this is my first glass screen protector, but this is definitely much thinner than the glass protector that my friend has on his Z1. It's so thin that it still fits in the magnetic charging dock, although I don't recommend this, as the dock scuffs up the rear ASF enough already without the added thickness. The thinness combined with the rounded edges make this feel extremely smooth at the edges, and my fingers glide on and off the edges like its nothing.
Speaking of gliding, the oleophobic coating is nice and slick. I've been rubbing my fingers and palms over it and the coating isn't letting up. I'm sure I've put enough finger oils on it to equal a month's usage and all I've been doing is wiping it off with a shirt and it's still holding up very well.
The size of the screen protector is pretty much exactly the size of the display glass so you must be extremely careful while installing it. Because I ruined mine I just quickly matched 2 edges on one side and put it down. I highly urge everyone to use the masking tape hinge method and take your time to hexacheck for a perfect fitment. Yes you can peel it off and reapply but you have an extremely high chance of cracking your glass. The protector is flexible to a degree but definitely not enough for you to peel it off the screen unless you are some master at peeling off protectors with minimal angle.
My heart bled as I folded this screen protector in half for the sake of science.
As you can see, the protector does not shatter, so it does a perfectly fine job as a replacement for your factory anti shatter film.
In an extreme case of folding in the edge like a page in a book, a very small piece of glass detached itself from the glass but proved to be harmless like the glass particles that also fell out of the cracks.
And of course I had to forget the scratch test. The protector, while having cracks all over, laughed at the futility of the multiple knives from around the house but was ultimately defeated by 150 grit sandpaper which left scratches too small for me to bother to attempt to capture with a camera. Back to the garbage can it goes.
Hope you all benefited from my stupidity and failure. I will now cry myself to sleep. This ends my preliminary review of the Crystal Armor Ultra Thin Full Flat Luxury Edge 0.2mm Screen Protector (WORD’S THINNEST!) with Chemically Strengthened Tempered Glass and Oleophobic Super Slick Surface and I still can’t post external links.
TO BE CONTINUED
Click to expand...
Click to collapse
sorry to see that buddy.... try nillkin next time it's smaller than the screen so it's very easy to fit, i did it without hinges, and it's also super slick, i sometimes have a hard time texting cos my fingers are sliding on the glass...
I don't see how a smaller screen protector makes it easier to fit, having to match the spacing on each side will definitely test the very limits of my patience, and I know I'll mess up and get reminded of my mistake every single time I use the phone.
Also can you please unquote the OP? That's a huge quote.
I have just received my front and back protector from Crystal Armour. For the front I got the 0,2mm version and for the back 0,33mm.
Later I will show you some photos.
I uploaded a comparison between Glass M and Crystal Armour, both 0,2mm thin, you can see there the difference in size of the protector.
I like that the CA haven't got a proximity sensor cut out, it is working without any issues.
And for the back protector I have to say, no flash cut out and no flash-light bleeding in photos.
masterv1 said:
I have just received my front and back protector from Crystal Armour. For the front I got the 0,2mm version and for the back 0,33mm.
Later I will show you some photos.
I uploaded a comparison between Glass M and Crystal Armour, both 0,2mm thin, you can see there the difference in size of the protector.
I like that the CA haven't got a proximity sensor cut out, it is working without any issues.
And for the back protector I have to say, no flash cut out and no flash-light bleeding in photos.
Click to expand...
Click to collapse
Nice info. Any pictures of the back glass? I was contemplating getting it but I'm not sure if I even need glass on the back side.
Winrahr said:
Nice info. Any pictures of the back glass? I was contemplating getting it but I'm not sure if I even need glass on the back side.
Click to expand...
Click to collapse
I like the feel of the back with the glass, because of rounded edges. Also less fingerprints and it's easy to remove them.
Before the glass I had a foil, I disliked it, because of scratches and fingerprints, it looked very cheap.
masterv1 said:
I like the feel of the back with the glass, because of rounded edges. Also less fingerprints and it's easy to remove them.
Before the glass I had a foil, I disliked it, because of scratches and fingerprints, it looked very cheap.
Click to expand...
Click to collapse
Hmmm.. My main concern for the back is the fingerprints so maybe a good oleophobic coating on the glass after removing the ASF would be good... Or I could just get a cheap rear glass...
Speaking of the ASF, I've been using my bare screen for a while so I'll talk a little about it.
Feels good to be touching actual glass :angel:
But because there is no coating on the glass, fingerprints and smudges build up very very quickly, and I had to clean it frequently. Because there's no coating on it there's a bit of friction against your fingertips. I'm sure that some Rain-X or some sort of glass sealant will make the screen a lot more smooth (friction wise, there's no texture on the glass obviously).
Now don't expect the display to magically improve without the ASF. It doesn't become more vibrant, bright, or have any better viewing angles.
But don't think that removing the ASF is pretty much pointless and is a stupid move. The ASF is a stupid move. Unless you slap a screen protector over the ASF as soon as you get the phone, you are going to get scratches because the ASF is so soft. So I got fed up with the marks and decided to just remove it. Now you have glass that is actually hard. Some people are just anti-protector and that's perfectly fine. The Dragontrail glass is tough and it's not gonna get scratched that easily. I think running the bare glass with some sort of sealant, oleophobic coating , or a mix you'll have a nice feeling anti-fingerprint glass. Just reapply when the coating wears off.
shteren said:
sorry to see that buddy.... try nillkin next time it's smaller than the screen so it's very easy to fit, i did it without hinges, and it's also super slick, i sometimes have a hard time texting cos my fingers are sliding on the glass...
Click to expand...
Click to collapse
Please quote wisely !!!
I'm about to order one of these too since it's the only one that doesn't have those ugly cutouts.
Did you order them from this page: apeiros.stores.jp?
I tried ordering from Japanese Amazon but they wouldn't ship them outside of Japan unfortunately.
I'm thinking of getting the front & back set since their camera opening also looks pretty snug on the back. Slightly worried about the flash though.
Any new pictures?
Anon of Holland said:
I'm about to order one of these too since it's the only one that doesn't have those ugly cutouts.
Did you order them from this page: apeiros.stores.jp?
I tried ordering from Japanese Amazon but they wouldn't ship them outside of Japan unfortunately.
I'm thinking of getting the front & back set since their camera opening also looks pretty snug on the back. Slightly worried about the flash though.
Any new pictures?
Click to expand...
Click to collapse
Yep you need to order from their page here which is specifically for out of Japan orders.
Then just put in your info like normal and don't worry about the state. You can repeat all the info in the comments field just in case.
I'm actually picking the new one up today and I'll have new pictures up soon. I didn't buy the back though.
There is actually no 0.2mm version set so you'll have to purchase the back glass separately here.
Hello, as you can read in the threadname, my question is, if the z1 compact has a anti shatter film on its backside. And does anybody know wich material it is. Plastic or glass? I own the european model.
Thanks a lot
European version has plastic... And there is no any anti shutter sadly you need to remove back plastic panel of you want change
Unfortunately I have tried to peel the film. So the bravo of my phone looks very ugly. Now I have to order a new backcover for assembly. Any tips or tricks about it. I know there are many videos,but..... I am a little bit angry about the water resistant of the phone,if I assemble the backcover.
Film is included an preinstalled on the inner surface of the backcover. That's good to know.
Once again any tips or tricks?
Thanks allot
Only advice from me is that you should go to company which is official service and check how much it will costs to change backpanel (you should by glass one) it will do on warranty and should keep water resistant(I think) but you can give it a try if you have something that in your city
Maybe putting on something like that is an alternative: http://m.ebay.de/itm/121335821880 I find it quite beautiful on mine, optically as well as haptically.
AlexandreVegetaroux said:
Unfortunately I have tried to peel the film. So the bravo of my phone looks very ugly. Now I have to order a new backcover for assembly. Any tips or tricks about it. I know there are many videos,but..... I am a little bit angry about the water resistant of the phone,if I assemble the backcover.
Film is included an preinstalled on the inner surface of the backcover. That's good to know.
Once again any tips or tricks?
Thanks allot
Click to expand...
Click to collapse
- Make sure the plastic frame surround does not lift at all along with the back, or you'll end up ****ing the frame glue and it's goodbye waterproofing and hello phone that creaks when you hold it
- There's a reason why professionals use an evenly heated flat surface - hairdryers/heatguns/similar will increase your chances of ****ing the frame glue
- Use isopropyl or similar to get the internal surface absolutely clean
- Heat it again slightly after applying the new back
- Apply loads of pressure (eg put it under some books)
- After it's all dried, make sure you can't lift the back AT ALL if you put your fingernail in the groove above the LED flash. If it lifts you will end up with a foggy camera lens from normal use and a ****ed phone if you expose it to water
Hello guys, I am looking for a good tempered glass that can handle scratches and protect the phone from drops.. I had a tempered glass but my phone droped from 1 meter and the glass and the screen too just came broken... So I want the best from you..
These two are great. You can buy from AliExpress :
http://s.aliexpress.com/3yeIFv6v
http://s.aliexpress.com/YvuUBbMz
Features:
9H Hardness
2.5D round edge
Very Thin 0.2mm
Strong
Awesome Touch Experience
Dust Proof
Oil Proof
Anti Glare
Nothing comes close to these glasses they are bit expensive compared to 2-3$ glasses but worth every penny.
Thank You
sarthakwarlock said:
These two are great. You can buy from AliExpress :
http://s.aliexpress.com/3yeIFv6v
http://s.aliexpress.com/YvuUBbMz
Features:
9H Hardness
2.5D round edge
Very Thin 0.2mm
Strong
Awesome Touch Experience
Dust Proof
Oil Proof
Anti Glare
Nothing comes close to these glasses they are bit expensive compared to 2-3$ glasses but worth every penny.
Thank You
Click to expand...
Click to collapse
I think nilkin can't get over all of the screen, I mean can't protect the all screen. At the edges would be empty..
StonebridgeGr said:
I think nilkin can't get over all of the screen, I mean can't protect the all screen. At the edges would be empty..
Click to expand...
Click to collapse
Bro, Tempered Glasses don't work like that. Last week i dropped my max just from above a feet. Since it fell by corner it popped out of frame i pushed it back. Got a little dent on corner and i don't had glass or cover. I ordered a metal cover which i will receive by the week. I will test that and put a review on accessories section. Tempered glass don't provide protection from dropping ur phone. I would recommend you case over glass since they only provide screen protection not 360 protection.
Cover Link: http://s.aliexpress.com/YrQN3yeE
Wait few days i will put a detailed review of this cover With pros and cons..
Thank You
sarthakwarlock said:
Bro, Tempered Glasses don't work like that. Last week i dropped my max just from above a feet. Since it fell by corner it popped out of frame i pushed it back. Got a little dent on corner and i don't had glass or cover. I ordered a metal cover which i will receive by the week. I will test that and put a review on accessories section. Tempered glass don't provide protection from dropping ur phone. I would recommend you case over glass since they only provide screen protection not 360 protection.
Cover Link: http://s.aliexpress.com/YrQN3yeE
Wait few days i will put a detailed review of this cover With pros and cons..
Thank You
Click to expand...
Click to collapse
you are wrong, tempered glass can protect a phone from fall, i had a s6 and a good tempered glass, i drop it many many times down with the screen by my fault and nothing happened!! believe me!!
StonebridgeGr said:
you are wrong, tempered glass can protect a phone from fall, i had a s6 and a good tempered glass, i drop it many many times down with the screen by my fault and nothing happened!! believe me!!
Click to expand...
Click to collapse
U talking about Samsung Galaxy S6??
I believe you. They can protect some devices but not all. samsung s6 body is made of gorilla glass 4 (front and back panel). I guess that G Glass 4 is the most latest by corning. How strong is it you can see demo on YT. Even if you don't had glass on it. Normally It wasn't going to break. Although sometimes it's glass get crack if you drop it without case or screen guard.
On other hand we have Mi Max which got a metal body. It's weight is 203g and have massive screen. S6 weight only 138grams. I am saying if it falls to floor by it's back/front panel, There's no prob but if it falls by corner then you have to worry about it.
Also i have experienced that devices with a plastic body don't break easily and metal devices get dents sometimes if they fall by corners. So the only damage i m talking about metal device is DENTS. If you drop it from ur pocket it's more likely going to be a side drop (it can fall by corner). Side drop will more likely results ina dent and i don't think a galas will protect from side drops. Glass is grt for screen protection.
At the end choice is yours!! choose wisely
Had my Mi Max screen broken. 50 cm flight right to the stone parquet. The corners are weak spots. So, if you have screen protector not covering the ends, glass is not protected. Nothing helps, ok maybe some ugly case.
About metal unibody... good commercial. I have reassmbled Mi Max for few times. No metal in there.
ptr21 said:
Had my Mi Max screen broken. 50 cm flight right to the stone parquet. The corners are weak spots. So, if you have screen protector not covering the ends, glass is not protected. Nothing helps, ok maybe some ugly case.
About metal unibody... good commercial. I have reassmbled Mi Max for few times. No metal in there.
Click to expand...
Click to collapse
Suggest me good tempered glass and a good case that can handle this cases.. but not a case like the above's guy..
I wish I could help. I have read several forums about screen protecting but sadly there is no solution because Mi Max has 2,5D edges.
About case: i have used Nillkin hard plastic transparent cover. Looks solid, edges over the corners. Havent dropped yet, but I truely believe, that it minimizes the risk.
ptr21 said:
I wish I could help. I have read several forums about screen protecting but sadly there is no solution because Mi Max has 2,5D edges.
About case: i have used Nillkin hard plastic transparent cover. Looks solid, edges over the corners. Havent dropped yet, but I truely believe, that it minimizes the risk.
Click to expand...
Click to collapse
I found a good tempered for 6 euros.. it covers all the screen, the TEMPERED that I had it was covering all the screen... So out there are exist some good tempered glass
What do you think about a bumper for case? It helps?