I've finally decided to unlock my bootloader. My Arc is sim-free, I've followed SE/XDA instructions to the letter yet when I check if the phone is connected for unlocking(can't remember the exact command, but blue light is on, command window opened in correct folder etc.)I get an error message along the lines of adbwin.dll is not present, I'm not at home just now and if required I'll post the exact messages. All sdk packs have been downloaded, installed and updated. I'm using windows7, 64 bit(x86) and no luck... The phone is rooted on .145, I think I read somewhere that to unlock the bootloader the phone should not be rooted so if this is definitely the reason then I'd be happy to use SEUS to update then proceed, but I'm not sure this is the cause. Before somebody posts a 'let me google that for you', I have tried various threads(obv xda, android soul, android forum, SE)with no success. I'm probably missing something really obvious or straightforward, and if so please feel free to point this out
Have a look at first post in this thread - you have to copy two files
Ahhh. Thanks
Sent from my LT15i
I'm having weird problems with the PC to USB connection on a oneplus 3. Im trying to get it to recognise so that I can flash it back to stock, but my PC always gives the "the last device malfunctioned" error and it always shows up as "unknown usb device (device descriptor request failed)"...
This happens in MSM bulk mode, fastboot mode and even in recovery mode. Tried it on a windows 7 and 10 pc, no dice, can't even install the driver. Tried a different cable too. It works completely fine on another op3...
Replacing the USB c port didn't work either. Has anyone had a similar issue? Charging works fine...
I'm hoping it's somehow a software issue because otherwise it's looking like a mainboard issue and these seem quite expensive to replace... so any tips or advice are very welcome
Thanks already
THREAD CLOSED! If you're interested in this subject continue to follow in this already existing thread, where the OP has also posted in the exact same time: https://forum.xda-developers.com/oneplus-3/help/usb-device-recognized-t3722279/page2. The post has been copied to that thread.
@dafonehacker
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
I am following the instructions from motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
I've downloaded Motorola drivers for Mac, as well as platform-tools. I am booting the phone to booloader but then a weird barcode shows up: imgur.com/a/8sT2lds
Any idea how to make progress from there? By the way my phone model is XT2029-2
Nycticorax said:
I am following the instructions from motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
I've downloaded Motorola drivers for Mac, as well as platform-tools. I am booting the phone to booloader but then a weird barcode shows up: imgur.com/a/8sT2lds
Any idea how to make progress from there? By the way my phone model is XT2029-2
Click to expand...
Click to collapse
Would like to know it too. Passed some days searching the web for a answer, and got none. The only thing I get when scanning the barcode is a number that AFAIK doesn't match any serial nor anything at all in the phone; just a number from what I can tell. Using fastboot oem get_unlock_data doens't work at all too, I just get a "command unknown" error returned from fastboot. Tried different drivers, none seemed to work, and the only ones that did, gave me the barcode and the fastboot error when trying to unlock. A very weird error, this one; fastboot devices work just fine, fastboot getvar all too, so it really doesn't seem like a fastboot or driver issue. My last try was this article (https://www.xda-developers.com/how-to-discover-hidden-fastboot-commands/) to see if I could get a list of the phones OEM commands and figure out how to unlock it. Tried to extract the bootloader from the firmware I downloaded online, using a tool I found on the forum, but no success until now. Will try to root the phone and extract it as it is shown in the tutorial to see if I can get more lucky. I saw somewhere that there's an app called sunshine that was used to unlock some older models, maybe you wanna try that too. I won't, because it's paid and I don't have the money to pay for it . Anyway, I'll try the bootloader extracting and see how that works, and depending on the output, maybe I'll post a tutorial here.
Def4lt_ said:
Would like to know it too. Passed some days searching the web for a answer, and got none. The only thing I get when scanning the barcode is a number that AFAIK doesn't match any serial nor anything at all in the phone; just a number from what I can tell. Using fastboot oem get_unlock_data doens't work at all too, I just get a "command unknown" error returned from fastboot. Tried different drivers, none seemed to work, and the only ones that did, gave me the barcode and the fastboot error when trying to unlock. A very weird error, this one; fastboot devices work just fine, fastboot getvar all too, so it really doesn't seem like a fastboot or driver issue. My last try was this article (https://www.xda-developers.com/how-to-discover-hidden-fastboot-commands/) to see if I could get a list of the phones OEM commands and figure out how to unlock it. Tried to extract the bootloader from the firmware I downloaded online, using a tool I found on the forum, but no success until now. Will try to root the phone and extract it as it is shown in the tutorial to see if I can get more lucky. I saw somewhere that there's an app called sunshine that was used to unlock some older models, maybe you wanna try that too. I won't, because it's paid and I don't have the money to pay for it . Anyway, I'll try the bootloader extracting and see how that works, and depending on the output, maybe I'll post a tutorial here.
Click to expand...
Click to collapse
Ok so after analysis the barcode just the IMEI associated with my SIM card's slot. (This phone has two SIM card slots.) Nothing interesting about it, I think.
Also it seems that Motorola does not support unlocking this bootloader as it does for other phones; in fact "motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a" is just a hub for any phone listed at "support.motorola.com/us/en/solution/MS87215", and this one is not on the list. I am not aware of any way to unlock the bootloader in these circumstances.
Please let me / us know if you are more successful than me. For now I will consider this phone not rootable via this method.
PS: The furthest I've been: `fastboot oem get_unlock_data` returns a blank line as if the mobile was working. No error message or anything.
PPS: What do you mean by "extracting the bootloader"? What rooting method is extracting the bootloader part of?
The official list of devices that can be unlocked has never been complete.
Usually all moto models can be unlocked, except Carrier branded devices or those on Amazon software channel.
Those getting the barcode screen, is that from
Pressing the volume down button and power on, or
adb reboot bootloader
?
Sent from my ali using XDA Labs
Nycticorax said:
Ok so after analysis the barcode just the IMEI associated with my SIM card's slot. (This phone has two SIM card slots.) Nothing interesting about it, I think.
Also it seems that Motorola does not support unlocking this bootloader as it does for other phones; in fact "motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a" is just a hub for any phone listed at "support.motorola.com/us/en/solution/MS87215", and this one is not on the list. I am not aware of any way to unlock the bootloader in these circumstances.
Please let me / us know if you are more successful than me. For now I will consider this phone not rootable via this method.
PS: The furthest I've been: `fastboot oem get_unlock_data` returns a blank line as if the mobile was working. No error message or anything.
PPS: What do you mean by "extracting the bootloader"? What rooting method is extracting the bootloader part of?
Click to expand...
Click to collapse
That's weird. My barcode number doesn't seem to match any numbers at all, serial, IMEI, nothing. I'll double check it to see if I have missed something. Never got this blank line, would be happy if you shared how you achieved it, maybe there could be some insight I can get from the process. Answering the question about the bootloader, the extraction isn't a part of a rooting method, it's only something I'm trying in order to get the list of oem fastboot commands of the phone. Those are manufacturer-specific, aren't listed anywhere, and differ from model to model. The method I'm using is the one from the article I pointed in my previous answer. Anyway, if it takes me anywhere, I'll bring an update about it with details.
---------- Post added at 23:36 ---------- Previous post was at 23:04 ----------
sd_shadow said:
The official list of devices that can be unlocked has never been complete.
Usually all moto models can be unlocked, except Carrier branded devices or those on Amazon software channel.
Those getting the barcode screen, is that from
Pressing the volume down button and power on, or
adb reboot bootloader
?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
The barcode is from entering the bootloader. Any method that gets you there shows it. At first I thought it was a driver-related bug, but after some experimentation it seems like whenever the device is recognized by fastboot, it shows this barcode; So it appears to be a bootloader-related thing (I never saw nothing like it, so just guessing for now). Also tried the method from the Motorola website, and I really wish it had worked as expected, but what it seems to me is that MediaTek devices are a pain in the ass in general for this kind of thing. The device doesn't recognizes the oem commands sent through fastboot as valid (And yes, OEM Unlocking is properly enabled under Developer Settings). Here's a screenshot from a powershell session showing the results of trying the commands. Notice how the device is correctly recognized by both adb and fastboot, only the unlocking commands doesn't work: https://pasteboard.co/JnW4cvK.png
sd_shadow said:
The official list of devices that can be unlocked has never been complete.
Usually all moto models can be unlocked, except Carrier branded devices or those on Amazon software channel.
Those getting the barcode screen, is that from
Pressing the volume down button and power on, or
adb reboot bootloader
?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
In my case the barcode shows up whenever I reach fastboot, whether via booting with [vol up + power] and then selecting fastboot, or via adb reboot bootloader. I've tried several barcode recognition apps and 2 out of 3 confirm it's my IMEI.
Nycticorax said:
In my case the barcode shows up whenever I reach fastboot, whether via booting with [vol up + power] and then selecting fastboot, or via adb reboot bootloader. I've tried several barcode recognition apps and 2 out of 3 confirm it's my IMEI.
Click to expand...
Click to collapse
Did you try
Code:
fastboot flashing unlock_critical
according to this thread... it is for e6 plus. May be it works with e6 play.
https://old.reddit.com/r/androidroot/comments/f6c5k5/unlock_bootloader_moto_e6_plus/fupyalw/
No,
Code:
fastboot flashing unlock critical
does not work. And no, we shouldn't assume that a method meant for the e6 plus works for the e6 play.
Phone in red state not able to change settings
I have struggled with the same problems as above. I am not able to get into the developer mode as I only have access to the recovery screen. Anybody who knows how to do that from the recovery screen - perhaps using terminal?
I have been able to enter into the phone by adb sideload filename.zip and the phone acknowledged connection, but the upload failed, probably due to I am not able to unlock the phone from the red state/Android Recovery. It is running bali-reteu/bali9/POAS29.550-81-1/
glensbo said:
I have struggled with the same problems as above. I am not able to get into the developer mode as I only have access to the recovery screen. Anybody who knows how to do that from the recovery screen - perhaps using terminal?
I have been able to enter into the phone by adb sideload filename.zip and the phone acknowledged connection, but the upload failed, probably due to I am not able to unlock the phone from the red state/Android Recovery. It is running bali-reteu/bali9/POAS29.550-81-1/
Click to expand...
Click to collapse
It is not clear to me what you did exactly. The step where we -- the others participants to this post and I -- are stuck is [2] here below:
boot to fastboot by running `adb reboot bootloader` from a command line on a connected and turned on device
get the OEM unlock code by doing `fastboot oem get_unlock_data` from a connected device under the fastboot interface
exchange the unlock code on the motorola support site and input that code to confirm bootloader unlock
glensbo said:
I have struggled with the same problems as above. I am not able to get into the developer mode as I only have access to the recovery screen. Anybody who knows how to do that from the recovery screen - perhaps using terminal?
I have been able to enter into the phone by adb sideload filename.zip and the phone acknowledged connection, but the upload failed, probably due to I am not able to unlock the phone from the red state/Android Recovery. It is running bali-reteu/bali9/POAS29.550-81-1/
Click to expand...
Click to collapse
Got a little further as the code:
#fastboot flash unlock_critical Filename.zip#
the phone replied - Transferring and Transmission OK .... time etc
But I got an error sadly to say:
Failed (remote: not allowed in locked state) so I'm back to basics as I cannot open the state from the recovery mode (as of yet)
glensbo said:
Got a little further as the code:
#fastboot flash unlock_critical Filename.zip#
the phone replied - Transferring and Transmission OK .... time etc
But I got an error sadly to say:
Failed (remote: not allowed in locked state) so I'm back to basics as I cannot open the state from the recovery mode (as of yet)
Click to expand...
Click to collapse
Okay, I would like to be positive and call that a progress but the whole point of steps (2-3) is to have it unlocked so that you can proceed to root to flashing it the way you're trying to.
So I am pretty pessimistic on that one. To me it looks like a case of a cheap phone a company has no real urge to make easy to unlock.
Nycticorax said:
It is not clear to me what you did exactly. The step where we -- the others participants to this post and I -- are stuck is [2] here below:
boot to fastboot by running `adb reboot bootloader` from a command line on a connected and turned on device
get the OEM unlock code by doing `fastboot oem get_unlock_data` from a connected device under the fastboot interface
exchange the unlock code on the motorola support site and input that code to confirm bootloader unlock
Click to expand...
Click to collapse
Sorry got carried away finding a group dealing with the same problem as I have. And not skimming but reading the text I can confirm that I am stuck at the same place. Sorry for the interruption. I will revert if/when I have something new.
glensbo said:
Sorry got carried away finding a group dealing with the same problem as I have. And not skimming but reading the text I can confirm that I am stuck at the same place. Sorry for the interruption. I will revert if/when I have something new.
Click to expand...
Click to collapse
It's okay. I hope one of us can find something useful. Let Root, the God of Hacks, send His best love waves to you guys
wow No Help
Biniesuschristos said:
wow No Help
Click to expand...
Click to collapse
Just curious do you know what software Channel your phone is on?
The software Channel might be listed in
Settings/ about phone.
Or try
Code:
fastboot getvar all
While in fastboot mode
ro.carrier = Software Channel
Sent from my ocean using XDA Labs
You didn't ask me but perhaps it might help you help us:
Code:
reteu
for me.
I'm don't actually know anything regarding rooting mobile devices but i'm going to post some of my experience thinking it might help someone who actually knows what to do.
I've been having the same issue while trying to unlock the bootloader.
As it seems all of the fastboot commands are working fine except the OEM ones which is strange considering that i'm sure i toggled the OEM Unlock on the dev. options, just like some members commented already.
Regarding the barcode it shows as soon as i connect the device via USB in Fastboot mode, and it shows up when i use "adb reboot bootloader" too, but it wasn't showing before i updated the USB Drives so i could find the device via "fasboot devices" (the phone wasn't showing before i did it).
pontiacus said:
I'm don't actually know anything regarding rooting mobile devices but i'm going to post some of my experience thinking it might help someone who actually knows what to do.
I've been having the same issue while trying to unlock the bootloader.
As it seems all of the fastboot commands are working fine except the OEM ones which is strange considering that i'm sure i toggled the OEM Unlock on the dev. options, just like some members commented already.
Regarding the barcode it shows as soon as i connect the device via USB in Fastboot mode, and it shows up when i use "adb reboot bootloader" too, but it wasn't showing before i updated the USB Drives so i could find the device via "fasboot devices" (the phone wasn't showing before i did it).
Click to expand...
Click to collapse
Windows 10?
Sent from my ocean using XDA Labs
@sd_shadow: Do you think it looks like a bootloader you could unlock?
Hello, I seem to have bricked my OnePlus 9 Pro, I was trying to update my phone without losing root, and it got stuck in a Boot loop. I then tried to flash the original os onto the phone without losing data, so I forgot to hard wipe the phone. it's now not turning on at all, No Recovery Mode, no Fastboot, no nothing. I think there's still EDL mode on it, but when I try to fix it using MSM method, it's not showing up. I have installed the Qualcomm driver thing, so it's showing up as that, but No Device is found once trying to fix it with that Method, does anyone have a clue how to fix this.
MOD ACTION:
Thread closed as duplicate of https://forum.xda-developers.com/t/bricked-phone-looking-for-help.4476101/unread
@Aphriz
Please read Rule 5:
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
hi guys this right here is a tutorial to unlock your realme 2 pro's bootloader i have covered every possible problem that you can have ok so lets begin ( you agree to the fact that you are responsible for everything that happens to your pc or phone by reading this) ( i am pretty sure nothing would happen but uhhh.. i dont want any angry person coming after me)
forgot to mention this is for windows
the steps:
1. enable usb debugging
2.enable oem unlocking
3.download sdk on your pc (if you dont know how to boom here is a guide https://www.xda-developers.com/install-adb-windows-macos-linux/ )
4.download adb setup ( i am generous so have a link :-https://forum.xda-developers.com/t/official-tool-windows-adb-fastboot-and-drivers-15-seconds-adb-installer-v1-4-3.2588979/ )
5. run it and say yes to everything
6. here comes the commands :-
1. adb devices ( click on yes on your phone
2 .adb reboot bootloader
3. adb flashing unlock
now sip on some tea (or coffee if you are american) this is going to be an unnerving process
fixing errors:
1.<waiting for device>
now this took me a long time to fix this so the error is probably because your phone does not like the adb driver (it happens sometimes) so after going on adb driver tinder i found a perfect match made by the glorious ccp themselves (the glorious ccp part is meant to be sarcasm) a sketchy vivo chinese driver entirely in Chinese (wierd story- when i was installing it the loading bar had a full on siezure because i did not have chinese characters installed) now i am not taking any responsibility for anything that happens to your pc or device by installing this driver soooooooooooooooo..... just install it and reboot (it should work) i have attached it below
2. press any key to shut down your device
just run the batch file i listed below as admin and reboot the zip with the lyrics of 2002
boooooooooom you are done thank me later
(btw sorry for my bad english its not my first language and i am 13)
Hi @Godhelpmetofindananswer, this thread has been moved from the developer forum to the guides, news and discussion forum since it didn't qualify for being in the development forum. Going forward, before before posting, kindly read the sticky threads at the top of every forum to know which thread should go in which section. Thanks!
Regards,
shadowstep
Senior Moderator