Hi , as the topic says, did any tried Indian firmware in another country variant through Odin?
Yes I did.
EU version to the India version.
After that the device was unable to check for an update.
So, now on EU version again, just got the latest update.
Have a good day.
When I tried to flash Indian firmware in Australian variant , it stops at the partition failed.
I even tried to extract the pit file and flashed along with pit. But no luck .
Did u came across this??
ramprabhu19 said:
When I tried to flash Indian firmware in Australian variant , it stops at the partition failed.
I even tried to extract the pit file and flashed along with pit. But no luck .
Did u came across this??
Click to expand...
Click to collapse
I had no problem. Download the firmware from sammobile, flash it with Odin.
mausfing said:
Yes I did.
EU version to the India version.
After that the device was unable to check for an update.
So, now on EU version again, just got the latest update.
Have a good day.
Click to expand...
Click to collapse
Will NFC still work? EU version and Australian version has NFC but Indian has no NFC.
I have A505F/DS, can I install indian firmware??
You can install the software from any country as long as your devices model number is the same.
You can also flash the software from other A50 model numbers however some features may not work.
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
fakhrads said:
I have A505F/DS, can I install indian firmware??
Click to expand...
Click to collapse
Yes you can as the Indian firmware has the same model number as you.
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
syl0n said:
Will NFC still work? EU version and Australian version has NFC but Indian has no NFC.
Click to expand...
Click to collapse
No I tested it myself, I even tried reinstalling the NFC service APK with no luck. Everything else worked just the NFC that didn't
Related
It's out.
2016-03-03 - Kazakhstan - 6.0.1 - G928FXXU2BPB6 (PDA) - G928FOXE2BPB6 (CSC) - Sammobile link
2016-03-04 - Baltic - 6.0.1 - G928FXXU2BPB6 (PDA) - G928FOXX2BPB6 (CSC) - Sammobile link
2016-03-04 - Poland - 6.0.1 - G928FXXU2BPB6 (PDA) - G928FOXX2BPB6 (CSC) - Sammobile link
See how to use odin in the attachments.
Warning: You will loose all your data on internal storage.
Happy flashing
Hello!
Problably several hours for others country I think.
It's been out since 7 am. We'll all still waiting for other variants, only two G928F firmware's have been released today. Sammobile doesn't have the other one, which is Baltic.
so install over Odin maybe?
As reported in @Gh3ttoKiLL4 post here, you can use the provided pit file and install using odin
If we did, we might lose Samsung Pay or Android Pay
Hello. I have G928F on 5.1.1 BTU and seeing that Poland XEO is receiving OTA update to MM I installed 5.1.1 XEO (clean, full wipe), thinking that I would instantly receive this OTA.
Unfortunately, the CSC remained BTU (firmware XEO).
Device is not rooted, forgot to mention.
Boot in recovery, format device, after booting the CSC is TPH and stays that way no matter what I do.
What can I do to change this CSC from TPH to XEO in order that everything be XEO and succeed with OTA to MM?
PLease help......
no deepsleep fix doesn´t work for me. any idea?
ionutdicu said:
Hello. I have G928F on 5.1.1 BTU and seeing that Poland XEO is receiving OTA update to MM I installed 5.1.1 XEO (clean, full wipe), thinking that I would instantly receive this OTA.
Unfortunately, the CSC remained BTU (firmware XEO).
Device is not rooted, forgot to mention.
Boot in recovery, format device, after booting the CSC is TPH and stays that way no matter what I do.
What can I do to change this CSC from TPH to XEO in order that everything be XEO and succeed with OTA to MM?
PLease help......
Click to expand...
Click to collapse
Go in recovery and do a factory reset
kpyhere said:
Go in recovery and do a factory reset
Click to expand...
Click to collapse
I did factory reset in recovery but CSC is not changing from TPH...
I also noticed that all the firmwares are exactly the same for TPH and XEO so how can be the CSC changed inside them without rooting???
Has anybody tried to installed the kasachstan firmware right now? over odin? Will this work?
I have a g928f in the uk and my csc is xeu can I flash this firmware over without a pit file using odin and will my data be deleted on my phone.
tymex928 said:
Has anybody tried to installed the kasachstan firmware right now? over odin? Will this work?
Click to expand...
Click to collapse
I tried it 10 minutes ago without any pit files or anything and failed miserably.
DaRkRaGe said:
I tried it 10 minutes ago without any pit files or anything and failed miserably.
Click to expand...
Click to collapse
I tried it as well. No luck. Now my screen is burning in while i download the older firmware.
DaRkRaGe said:
I tried it 10 minutes ago without any pit files or anything and failed miserably.
Click to expand...
Click to collapse
sounds not good....
i have the SM-G928F and now on the build version from Number, but on CSC with SIM/BTU.
what have you?
can you restore your phone or what happend now?
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
I Thought its the same firmware on every modell?
tymex928 said:
sounds not good....
i have the SM-G928F and now on the build version from Number, but on CSC with SIM/BTU.
what have you?
can you restore your phone or what happend now?
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
I Thought its the same firmware on every modell?
Click to expand...
Click to collapse
I dont know my CSC i think it's polish? no idea, never cared Now im downloading an old 5.1.1 firmware to install it via odin and hopefully it will work.
have you tried it the firmware only with one part oder with the 4 parts?
---------- Post added at 05:15 PM ---------- Previous post was at 05:14 PM ----------
Have you tried it with one part file or with all 4 of them in odin?
tymex928 said:
sounds not good....
i have the SM-G928F and now on the build version from Number, but on CSC with SIM/BTU.
what have you?
can you restore your phone or what happend now?
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
I Thought its the same firmware on every modell?
Click to expand...
Click to collapse
tymex928 said:
have you tried it the firmware only with one part oder with the 4 parts?
---------- Post added at 05:15 PM ---------- Previous post was at 05:14 PM ----------
Have you tried it with one part file or with all 4 of them in odin?
Click to expand...
Click to collapse
the firmware zip has 1 tar file inside. What do you mean 4 parts?
any problems with deepsleep? can´t fix it
vision89 said:
any problems with deepsleep? can´t fix it
Click to expand...
Click to collapse
Try this kernel.......http://forum.xda-developers.com/s6-...pment/kernel-skyhigh-mm-6-0-1-kernel-t3327816
Happy Flashing:laugh:
Mazzie
Im using N930W8 the canadian variant of the note 7. I just recieved the 60% update while phone auto update disabled sitting on my desk. I need to know if there is a method to root the canadian variant and if it will fix the problem of the battery cap if I run a custom ROM. I've been hearing about it the Sprint root method working but I wasn't sure. Thanks for your help!
Note 7 Problem - please help if you can, please
Hello
I am newbie here with no proper experience [ I flashed mobile with success once but it was years ago with NOKIA e90!]
I have Note 7 exynos UK VODAFONE and I did flashed it with older OEM firmware [ to bring it back to 100% battery], I downloaded from sammobile than recent one on my mobile [ limited 60% battery]
I unchecked re-partition
I used AP file there
all went fine with ODIN v3.11.1 all pass !
but once mobile started I have big message on my screen which does not disappear [ see attached photo]
unfortunately, the process
com.android.phone stopped
I can click/press OK on screen below that message, but it reappears again and again
I tried to flash it again but now ODIN says fail and something about PIT [see attached photo]
I would appreciate some help or tell me what steps I should take [ apart of surrendering phone to place I bought it from!!!]
regards
M.
Finally find away to get my phone back to 100% Battery charge.
You don't nedd root and also not need new Kernel.
Just need the new version of Odin and the original Note 7 initial Stock Rom.:victory:
I am also trying to do the same - without any sucess. Could you advise from which version you downgraded to which one ? A small gude will be highly appreciated
So any one have a solution to this thread ?
loser said:
I am also trying to do the same - without any sucess. Could you advise from which version you downgraded to which one ? A small gude will be highly appreciated
Click to expand...
Click to collapse
I kepp getting Kernel rev check fail note 7 device1 binary 0 error on the device
You need to have the latest Odin software when i am get back home will check it
---------- Post added at 01:21 PM ---------- Previous post was at 01:17 PM ----------
odin3_v3.12.4_4 google it please
closer666 said:
Finally find away to get my phone back to 100% Battery charge.
You don't nedd root and also not need new Kernel.
Just need the new version of Odin and the original Note 7 initial Stock Rom.:victory:
Click to expand...
Click to collapse
Do you have the ROM? I tried with new Odin and not sure if the ROM was the right one.
Any thoughts?
A copy of the rom would be nice.
Can you Please share in more detail, bcoz i have latest odin and oldest firmware downloaded but my fone did not go downgrade version, i get the same error as "sw check error...."
Please also share the ROM and its detail.
I got 80% back but not the 100%.
You help will be appriciated.
Rajaqaiser said:
Can you Please share in more detail, bcoz i have latest odin and oldest firmware downloaded but my fone did not go downgrade version, i get the same error as "sw check error...."
Please also share the ROM and its detail.
I got 80% back but not the 100%.
You help will be appriciated.
Click to expand...
Click to collapse
What Odin are you using ?
closer666 said:
Finally find away to get my phone back to 100% Battery charge.
You don't nedd root and also not need new Kernel.
Just need the new version of Odin and the original Note 7 initial Stock Rom.:victory:
Click to expand...
Click to collapse
closer666 said:
What Odin are you using ?
Click to expand...
Click to collapse
Odin 3.12.3
Please share the link of ROM you flashed.
any advice for somebody who's never rooted a device before? I'd rather not brick my Sprint N7, but i'd do almost anything to get rid of this stupid 60% thing.
Rajaqaiser said:
Odin 3.12.3
Please share the link of ROM you flashed.
Click to expand...
Click to collapse
download new ODIN here is for the NOTE 7 http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
closer666 said:
What Odin are you using ?
Click to expand...
Click to collapse
i am using Note 7 N930K is a Korean version my ROM does not work in N930F
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
xxxMJTxxx said:
Hello
I am newbie here with no proper experience [ I flashed mobile with success once but it was years ago with NOKIA e90!]
I have Note 7 exynos UK VODAFONE and I did flashed it with older OEM firmware [ to bring it back to 100% battery], I downloaded from sammobile than recent one on my mobile [ limited 60% battery]
I unchecked re-partition
I used AP file there
all went fine with ODIN v3.11.1 all pass !
but once mobile started I have big message on my screen which does not disappear [ see attached photo]
unfortunately, the process
com.android.phone stopped
I can click/press OK on screen below that message, but it reappears again and again
I tried to flash it again but now ODIN says fail and something about PIT [see attached photo]
I would appreciate some help or tell me what steps I should take [ apart of surrendering phone to place I bought it from!!!]
regards
M.
Click to expand...
Click to collapse
Download the new ODIN and try it again with the same ROM http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
closer666 said:
download new ODIN here is for the NOTE 7 http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
i am using Note 7 N930K is a Korean version my ROM does not work in N930F
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
Download the new ODIN and try it again with the same ROM http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
Click to expand...
Click to collapse
Hi
thanks but It is still not working, I tried that Odin version first I select all 4 files and got same error as before like " SW check error.....", then I tried only AP file to flash but then got "kernel check error.....", so it looks like it is not working, can you please share the detail procedure of flashing and share also link of ROM you flashed. highly appriciated
---------- Post added at 06:52 AM ---------- Previous post was at 06:46 AM ----------
closer666 said:
download new ODIN here is for the NOTE 7 http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
i am using Note 7 N930K is a Korean version my ROM does not work in N930F
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
Download the new ODIN and try it again with the same ROM http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
Click to expand...
Click to collapse
I think I just found the reason why you got downgraded to previous firmware, it is because in Korea they are using same bootloader for all updates. I have SM-N930FD and they have different bootloader for previous and updated firmware.
Thank you for your help.
How you find it out i am curious
closer666 said:
How you find it out i am curious
Click to expand...
Click to collapse
I have attached previous and latest korean firm ware and UAE previous and latest firmware.
I highlighted the difference. Korean firmware using same 1BP bootloader/ security patch in every korean firmware but in UAE Firmware oldest have 1BP bootloader/security patch and latest firmware have 2BP bootloader/ security patch so once you are updated to 2BP you can not down grade to 1BP but if you are at 1BP you can Install 1BP or upgrade to 2BP.
I have SM-N930FD and upgraded to 2BP so i am unable to downgrade 1BP patch firmware.
I am not good in explaining but hope you will understand what i am trying to say.LOL.
Yes 100% i do understand what you trying to say.
I thought is same for all Note 7
---------- Post added at 01:16 PM ---------- Previous post was at 01:14 PM ----------
So is it just luck that samsung has not change the bootloader in Korean Note 7 or is there purpose behind lol
Can we still root
Sent from my SM-G955U using XDA-Developers Legacy app
Curious because when I try it just fails
Sent from my SM-G955U using XDA-Developers Legacy app
paris10 said:
Curious because when I try it just fails
Click to expand...
Click to collapse
Yes root is possible. Check out partcyborgs rom or jrkruse roms.
Is that a Verizon rom
Sent from my SM-G955U using XDA-Developers Legacy app
If your flashing the root ROM it will fail, it states that in the thread. Read all the steps in the ROM post ad they are very specific
I just rooted my 8+ thanks to Rootjunky.com from one of his videos on youtube, I'm still on Verizon and I didn't have to flash any ROM, just some files and boom.
Does anybody know if Xposed works..
---------- Post added at 11:38 PM ---------- Previous post was at 11:37 PM ----------
Once rooted,has anyone tried unrooting for warranty reasons?
Super_SU01 said:
Does anybody know if Xposed works..
---------- Post added at 11:38 PM ---------- Previous post was at 11:37 PM ----------
Once rooted,has anyone tried unrooting for warranty reasons?
Click to expand...
Click to collapse
The PartCyborg rom comes with Xposed pre-installed. It is working fine for me, but I am not using too many modules. Good reports on Partcyborg's ROM thread though.
Yes, you can unroot and flash back to stock.
Smithfolk4 said:
The PartCyborg rom comes with Xposed pre-installed. It is working fine for me, but I am not using too many modules. Good reports on Partcyborg's ROM thread though.
Yes, you can unroot and flash back to stock.
Click to expand...
Click to collapse
Can you help me with which files I need to flash on my Verizon s8+ and do I need a specific version of Odin?[
Partcyborg rom?? That rom will work on the Verizon s8+? What's the cons of this rom..
How do i find out what bootloader version I'm running?
Super_SU01 said:
Can you help me with which files I need to flash on my Verizon s8+ and do I need a specific version of Odin?[
Partcyborg rom?? That rom will work on the Verizon s8+? What's the cons of this rom..
How do i find out what bootloader version I'm running?
Click to expand...
Click to collapse
You need prince comsy ODIN.
Look here
https://forum.xda-developers.com/ga...root-partcyborgrom-aqk3-samfail-odin-t3717702
Follow the instructions in the first post of the thread. Follow them verbatim. Read carefully before you start.
Use the BQL1 downloads in the second post of the thread.
This is what I did and it worked fine. I flashed both in COMSY ODIN. I did not use the Flashfire method, but I have used it before and it also works. If you do use Flashfire for the AP file (First file) be sure to flash the bootloader (second file) in COMSY ODIN..
Smithfolk4 said:
You need prince comsy ODIN.
Look here
https://forum.xda-developers.com/ga...root-partcyborgrom-aqk3-samfail-odin-t3717702
Follow the instructions in the first post of the thread. Follow them verbatim. Read carefully before you start.
Use the BQL1 downloads in the second post of the thread.
This is what I did and it worked fine. I flashed both in COMSY ODIN. I did not use the Flashfire method, but I have used it before and it also works. If you do use Flashfire for the AP file (First file) be sure to flash the bootloader (second file) in COMSY ODIN..
Click to expand...
Click to collapse
Thank you, my baseband is SQS2BRB1 now do I need to download a specific firmware?
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
Do I need the bootloop edition zip or the partcyborg zip?
Super_SU01 said:
Thank you, my baseband is SQS2BRB1 now do I need to download a specific firmware?
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
Do I need the bootloop edition zip or the partcyborg zip?
Click to expand...
Click to collapse
I recommend that you use the downloads in the second post, not the third. The bootloop edition is an older version. The latest works better. The latest that ends with BQL1 is compatible with your phone because both are based on bootloader version 2.
If you want to have a backup of your stock firmware you can download the BRB1 firmware from updato or from samsung. I find updato to provide much faster downloads, but sometimes it is a bit strange finding the firmware you want. You can usually search by phone and service provider.
Smithfolk4 said:
I recommend that you use the downloads in the second post, not the third. The bootloop edition is an older version. The latest works better. The latest that ends with BQL1 is compatible with your phone because both are based on bootloader version 2.
If you want to have a backup of your stock firmware you can download the BRB1 firmware from updato or from samsung. I find updato to provide much faster downloads, but sometimes it is a bit strange finding the firmware you want. You can usually search by phone and service provider.
Click to expand...
Click to collapse
Thanks I did download the AP_BQL1 CYBORG ROM part 1
And BL_cyborgromBQL1 part 2.
Im having issues with my USB port. I posted it in the partcyborg rom forum if you wanna take a look because I may need some help. If you can and have the time.
That's all I need to flash? I have Odin downloaded and on standby just waiting to figure out my USB thing.
I'm upgrading to Oreo
Currently I am using LG g7 Korean variant. I would like to change to the global variant, can I just flash the global variant without changing and setting?
Yes You can but I would recommend to flash ULM version because of LTE doesn't work properly after changing from Korean to EU version.
Hi
It is safe to change lg g7 G710N korean to any other country firmware from pie...
Aseiel said:
Yes You can but I would recommend to flash ULM version because of LTE doesn't work properly after changing from Korean to EU version.
Click to expand...
Click to collapse
It is safe to change to ulm version?
---------- Post added at 01:38 PM ---------- Previous post was at 01:03 PM ----------
My lg g7 is running on pie and i want to back to oreo with ulm?
---------- Post added at 01:38 PM ---------- Previous post was at 01:38 PM ----------
My lg g7 is running on pie and i want to back to oreo with ulm?
From g710ulm tp g710n
How to go back from ulm to korean.As i converted to ulm but android 10 is out for korean models so i want to go back.Any plz help
MalikSuffian said:
How to go back from ulm to korean.As i converted to ulm but android 10 is out for korean models so i want to go back.Any plz help
Click to expand...
Click to collapse
Download and crossflash back to
G710NP20k_00_LGU_KR_OP_1220.kdz
Can't it gives cross flash not supported on refurbished option should i try pardition fl or fota update
MalikSuffian said:
Can't it gives cross flash not supported on refurbished option should i try pardition fl or fota update
Click to expand...
Click to collapse
Crossflash with this method as long as you have download mode it'll work.
https://forum.xda-developers.com/lg-g7-thinq/how-to/cross-flash-oreo-pie-firmwares-lg-g7-g7-t3915303
Been awhile since I used samsung, so I'm just checking.
If I get the verizon model, I understand it will be locked to verizon. But I'd still prefer the clean(er) unlocked firmware. Can I flash that straight away or does it have to be "leaked" or whatever in the coming months?
finshan said:
Been awhile since I used samsung, so I'm just checking.
If I get the verizon model, I understand it will be locked to verizon. But I'd still prefer the clean(er) unlocked firmware. Can I flash that straight away or does it have to be "leaked" or whatever in the coming months?
Click to expand...
Click to collapse
Firmware are already available on Sammobile.com
---------- Post added at 05:36 PM ---------- Previous post was at 05:36 PM ----------
west2cool said:
Firmware are already available to download via the usual means.
Click to expand...
Click to collapse
west2cool said:
Firmware are already available on Sammobile.com
---------- Post added at 05:36 PM ---------- Previous post was at 05:36 PM ----------
west2cool said:
Firmware are already available to download via the usual means.
Click to expand...
Click to collapse
Including the newest march update?
Click to expand...
Click to collapse
Does a Unlocked S20 + have to be rooted to flash let's saw Verizon firmware onto it? Or just Odin and the rom?
Sent from my SM-G975U using Tapatalk
XRSTOY1 said:
Does a Unlocked S20 + have to be rooted to flash let's saw Verizon firmware onto it? Or just Odin and the rom?
Sent from my SM-G975U using Tapatalk
Click to expand...
Click to collapse
You don't need to be rooted, just Odin the official ROM.
Been awhile since played with Samsung but does device need to be unlocked for Odin? I.E Sprint model flashed to generic?