i have a 8.1 custom rom and want to upgrade to pie rom
put i have to change into Official Stock Oreo 8.1.0 first (i think !)
so what should i do
please help
As long as your base firmware is oreo (stock oreo was on your device before you flashed a custom rom) you just need to format system data cache & flash another custom rom
If you want to flash stock firmware just download it and flash it with fastboot commands - there's loads of step by step guides if you Google how but here are the commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Download firmware from https://mirrors.lolinet.com/firmware/moto/cedric/official/
TheFixItMan said:
As long as your base firmware is oreo (stock oreo was on your device before you flashed a custom rom) you just need to format system data cache & flash another custom rom
If you want to flash stock firmware just download it and flash it with fastboot commands - there's loads of step by step guides if you Google how but here are the commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Download firmware from https://mirrors.lolinet.com/firmware/moto/cedric/official/
Click to expand...
Click to collapse
sorry but i really dont know if i have oreo as a stock
i think it was nouget as stock
what should i do
and please get me a link how to instal stock rom using ADB
Hatem hesham said:
sorry but i really dont know if i have oreo as a stock
i think it was nouget as stock
what should i do
and please get me a link how to instal stock rom using ADB
Click to expand...
Click to collapse
You don't use adb to flash stock firmware - you use fastboot
The commands are written above with link to the firmware
I am not going to Google - how to install stock firmware on a moto g5 for you. I'm sure you are capable of doing that and reading the guides for a step by step walk through if you don't understand how to use the fastboot commands written above
Related
I have Moto g5(XT1677).I have try to flash the stock rom but few commands we're denied like erase customization,erase user data by bootloader.
Because of this cellular network is not coming.and IMEI NO has tend to '0'.but in custom ROMs there is no problem like this.please help me to flash the stock rom.
Extract stock firmware into a folder, then run the following script within the folder:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I have used this codes but the problem didn't solve.it still saying same (bootloader) access denied.
Hi, I have bricked my phone when I tried to flash my stockboot en recovery img files. What happens is that everytime I reboot the phone, it automatically reboots to the bootloader. I can access twrp.
I tried to flash stock firmware myself, but I flashed XT1921-3 instead of XT1922-3 because I couldnt find the right version. Nothing changed. I also tried to flash a GSI ROM and nothing changes there as well. Can someone help me out?
I managed to get my hands
You will have to pass the last stock in 9.0 for your G6 play, I did it in mine and I go back I was with an equal problem
i am used this version for my cellphone XT1922-5_ALJETER_RETBR_9.0_PPP29.55-25_cid50_subsidy-DEFAULT_regulatory-XT1922-5-BRAZIL-MANAUS_CFC you used similar version
in fastboot my solucion
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
Worked like a charm for my Xt1922-3 RETEU.
Hello friends, came out OTA update for my moto z2 Brazilian version, but I have twrp and magisk installed. Do I need to remove both and reinstall the original oreo firmware or can I upgrade normally?
ps: sorry i'm kinda noobie
EDIT: resolved: method posts below :victory:
You should leave it as without any modification. And install the update. Source: Own experience
dark-basic said:
You should leave it as without any modification. And install the update. Source: Own experience
Click to expand...
Click to collapse
so if i install stock recovery and remove magisk completely can i upgrade without problems?
viniisiilvaa said:
so if i install stock recovery and remove magisk completely can i upgrade without problems?
Click to expand...
Click to collapse
after some internet research, i did the update as follows.
MOTO Z2 PLAY MODEL XT1710-07 (I don't know if it works on other models)
1 - be in the version "RETBR OPSS27.76-12-25-23"
2 - completely removed magisk
3 - original re-flash recovery from last rom OREO from fastboot (XT1710-07_ALBUS_RETBR_8.0.0_OPSS27.76-12-25-23_cid50 ...) to remove TWRP
4 - Download Pie rom (XT1710-07_ALBUS_RETBR_9.0_PPS29.133-30_cid50 ...)
5 - Flash from fastboot with the following commands (I did not wipe not to lose the files)
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
took about 15-25 minutes and went back to normal operation. :victory::victory::victory:
PS: I am not responsible if your phone has a problem after this process. :good:
Hello,
I got an unlocked Moto G7 Play from ebay and apparently flashed LineageOS successfully. Set up all my apps etc, but when it was time to move my SIM card over, Mobile Network is grayed out, and About Phone -> IMEI said unknown.
It sounds like I need to revert to a stock rom to try to get the IMEI back, but which ROM?
This should be a US Moto G7 Play, unlocked - no carrier.
Also, once I find the right ROM how do I install it?
I am primarily a Linux user, not Windows, if that matters.
Thank you very much for any help.
Its best if you flash with windows, but it's possible with Linux too, but I had driver problems and computer wouldn't recognize phone.
Link to Stock ROM:
https://mirrors.lolinet.com/firmware/moto/channel/official/RETUS/XT1952-4_CHANNEL_RETUS_10_QPYS30.85-23-8-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Flash with these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash system_b.img_sparsechunk.0
fastboot flash system_b.img_sparsechunk.1
fastboot flash system_b.img_sparsechunk.2
fastboot flash system_b.img_sparsechunk.3
fastboot flash system_b.img_sparsechunk.4
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.3
fastboot flash vendor vendor.img_sparsechunk.4
fastboot flash vendor vendor.img_sparsechunk.5
fastboot flash vendor vendor.img_sparsechunk.6
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
mrsiri said:
Its best if you flash with windows, but it's possible with Linux too, but I had driver problems and computer wouldn't recognize phone.
Link to Stock ROM:
https://mirrors.lolinet.com/firmware/moto/channel/official/RETUS/XT1952-4_CHANNEL_RETUS_10_QPYS30.85-23-8-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Flash with these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash system_b.img_sparsechunk.0
fastboot flash system_b.img_sparsechunk.1
fastboot flash system_b.img_sparsechunk.2
fastboot flash system_b.img_sparsechunk.3
fastboot flash system_b.img_sparsechunk.4
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.3
fastboot flash vendor vendor.img_sparsechunk.4
fastboot flash vendor vendor.img_sparsechunk.5
fastboot flash vendor vendor.img_sparsechunk.6
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Had the same problem, this worked perfectly. Some of the commands are redundant as there aren't any files with that name in the rom zip (system sparsechunk 9 to 12 for example) but just ignoring them works just fine. Thanks.
Hi there guys,
I need help with my phone. I've flashed TWRP on it so i would be able to flash a custom ROM. Everything went fine and i was able to install the custom ROM without errors. Now, everytime i start my phone it only shows the "No Command" screen with an open belly Droid. The only way i'm able to boot it is going to fastboot mode and booting into Factory Mode.
I tried flashing the stock rom with several different methods, and all ends in the same, the "no command" screen on boot.
It's now flashed with the stock rom but i can't get it to boot normally. I've tried Formatting /data, /cache, everything in my hands. What should i do?
how, exactly, did you flash twrp?
using the instructions provided on twrp website
and what procedure did you use to re-flash stock?
i tried using fastboot and also the "Rescue and Smart Assistant" app, both ended up with the same results
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
try doing this
hi there,
that's what i did when i mentioned that i flashed using fastboot...
sergiobaiao said:
hi there,
that's what i did when i mentioned that i flashed using fastboot...
Click to expand...
Click to collapse
these exact commands in this exact order?
yes, exactly
then unfortunately im out of ideas