i did a big mistake..i flashed redmi 6 pro rom to my a2 lite ..now nothing is happening...edl mode/fastboot mode is not accessing.i also show my phone to a service center. thaaaay just **** me they breaak my fingerprint reader.......help me to boot my phone i have to brought a back-part with finger print reader.please help me
absigma said:
i did a big mistake..i flashed redmi 6 pro rom to my a2 lite ..now nothing is happening...edl mode/fastboot mode is not accessing.i also show my phone to a service center. thaaaay just **** me they breaak my fingerprint reader.......help me to boot my phone i have to brought a back-part with finger print reader.please help me
Click to expand...
Click to collapse
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
In few words search in Google : test point mi a2 lite and do it
SubwayChamp said:
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
Click to expand...
Click to collapse
i cant access fastboot but it is connecting to edl mode but not getting flash.when its connect a sounds on pc but when not properly not in edl the notification light blinking.please help me.
Os_Herdz said:
In few words search in Google : test point mi a2 lite and do it
Click to expand...
Click to collapse
tnx bro but i know testpoint and i used that when my phones bootloader locked
SubwayChamp said:
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
Click to expand...
Click to collapse
now showing in mi flash as COM6 but when try to flash is says ''cannot read from COM6" help me
absigma said:
now showing in mi flash as COM6 but when try to flash is says ''cannot read from COM6" help me
Click to expand...
Click to collapse
How is detected under device manager? qualcomm-HS-USB qdloader 9008? Also what about behaviour of led light, it stays on all the time or it blinks?
Edit: Now I read your previous post, Led light has to blink, this is correctly connected, see under device manager how it is detected.
SubwayChamp said:
How is detected under device manager? qualcomm-HS-USB qdloader 9008? Also what about behaviour of led light, it stays on all the time or it blinks?
Click to expand...
Click to collapse
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
absigma said:
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
Click to expand...
Click to collapse
Ok, Behaviour changes depending on what rom you actually are, it´s mean that now you have flashed some partitions from Miui rom (led light will stay off) at least it´s being detected.
Things that you can try:
- Move the rom to the same folder where XiaoMi flash is.
- Rename the folder as short as better like "xiaomi" without quotes.
- Put your Windows in "Test Mode", restart to changes take effects.
- Switch to other version of the tool, it worked for me latest from here https://xiaomifirmware.com/downloads/miflashpro/
- Try with other rom version.
absigma said:
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
Click to expand...
Click to collapse
i mconnect the battery now qualcomm-HS-USB qdloader 9008 in device manager & notification is blinking
absigma said:
i mconnect the battery now qualcomm-HS-USB qdloader 9008 in device manager & notification is blinking
Click to expand...
Click to collapse
Don't worry about led behaviour, your device will turn a bit weird cause you flashed a wrong firmware, the important here is that it's recognised by pc. What about the steps, tried?
Related
Hello,I recently flash a wrong file and now my device is straight up dead no logo nothing the led blinks for a mini second and turns off I tried using qfil and mi flash but it was getting detected as 900e port and wasn't even detected on mi flash I tried updating drivers and got it to 9008 but still it would get stuck forever when I hit download asap in qfil or would show some sahara port error and still no detection on mi flash even in 9008 mode I tried over 50+ times using the button combinations to get it to 9008 mode but every time it would be 900e any solution other than deep flash as I have just one type c cable and I may screw up
Press volume up key for 15 seconds, then press power button & insert usb (within a second) to pc..it will get it to edl mode..
probably your only way out is deep flashing, i've been through this
any solution for this ? i'm suffering the same
Whenever I put the battery on my redmi 1S MI logo keep restarting in every 2 seconds and and the fastboot mode also do this . After that I tried that test point method.and after that I discovered that my battery died and it is not charging then after some days I bought a new battery and while continuing the process I got the error "specified resources or device is not available" in 18 seconds of process in mi flash tool. when the qualcomm hs-usb loader 9008 port convert into Qualcomm hs usb 9006. Now my device is stuck in EDL mode no display black screen no response on and volume up down power button and when I connect the phone to PC it detects as the Qualcomm HS USB 9008 port.and when I connect the phone to the charger of PC without battery the red LED Notification light just blinks one time. Now please help me I got one and only the phone. And now I can't buy a new phone please suggest me away to get out of this problem. What do you think my phone hard bricked???.
:crying:
parag2001 said:
Whenever I put the battery on my redmi 1S MI logo keep restarting in every 2 seconds and and the fastboot mode also do this . After that I tried that test point method.and after that I discovered that my battery died and it is not charging then after some days I bought a new battery and while continuing the process I got the error "specified resources or device is not available" in 18 seconds of process in mi flash tool. when the qualcomm hs-usb loader 9008 port convert into Qualcomm hs usb 9006. Now my device is stuck in EDL mode no display black screen no response on and volume up down power button and when I
connect the phone to PC it detects as the Qualcomm HS USB 9008 port.and when I connect the phone to the charger of PC without battery the red LED Notification light just blinks one time. Now please help me I got one and only the phone. And now I can't buy a new phone please suggest me away to get out of this problem. What do you think my phone hard bricked???.
:crying:
Click to expand...
Click to collapse
Hi @parag2001
Follow the steps its a similar problem like yours
Link
https://forum.xda-developers.com/redmi-1s/help/redmi-1s-bricked-t3788482
Hope it helps
Alan Jose said:
Hi @parag2001
Follow the steps its a similar problem like yours
Link
https://forum.xda-developers.com/redmi-1s/help/redmi-1s-bricked-t3788482
Hope it helps
Click to expand...
Click to collapse
I tried each and every version of Mi Flash tool but not the first one. On each versions the Qualcomm HS USB qdloader 9008 changed to 9006 but after 4or 5 seconds the loader reverts back to 9008 and the error happens.
Will try the first version of mi flash tool. Thanks.....
parag2001 said:
I tried each and every version of Mi Flash tool but not the first one. On each versions the Qualcomm HS USB qdloader 9008 changed to 9006 but after 4or 5 seconds the loader reverts back to 9008 and the error happens.
Will try the first version of mi flash tool. Thanks.....
Click to expand...
Click to collapse
Did u fixed it??
Alan Jose said:
Did u fixed it??
Click to expand...
Click to collapse
Nope .. but I am trying.. iam think ing to follow this
https://www.google.co.in/amp/s/www....e-the-right-kind-of-rom-qhsusb_dload_edl/amp/
Can it fix my device???
Please suggest me a way..
The day before yesterday,
My phone became bricked caused by any reason.
I cound download ROM by using Mi-flash or QFIL but nothing happened after successing ROM download.
When I pushed Power key more than 5sec ~ 30sec, it did not blink led nor vibrate, keep black screen,
And PC lost connection and recover it as "9008" again.
PC could always
detect my phone as "Qualcomm HS-USB QDLoader 9008".
How can I recover my phone?
Please help me escape from nightmare.
Josephjin said:
The day before yesterday,
My phone became bricked caused by any reason.
I cound download ROM by using Mi-flash or QFIL but nothing happened after successing ROM download.
When I pushed Power key more than 5sec ~ 30sec, it did not blink led nor vibrate, keep black screen,
And PC lost connection and recover it as "9008" again.
PC could always
detect my phone as "Qualcomm HS-USB QDLoader 9008".
How can I recover my phone?
Please help me escape from nightmare.
Click to expand...
Click to collapse
Flash again with qfil.
Palash9088 said:
Flash again with qfil.
Click to expand...
Click to collapse
I did more than 10times but the result was same.
Thanks,
Josephjin said:
I did more than 10times but the result was same.
Thanks,
Click to expand...
Click to collapse
u need to do unbrick using the deep flashing cable..
These links should help you.
https://forum.xda-developers.com/lenovo-zuk-z2/help/hard-bricked-trying-to-restore-twrp-t3747602
https://zukfans.eu/community/thread...-from-hard-brick-state-9008-mode-easily.3504/
Help please,
My phone messed up when updating via orangefox, now wont switch on.
if i hold the power putton and plugin the phone i get:-
Qualcomm HS-USB QDLoader 9008 (COM10)
i have MI FLASH and have downloaded ugglite_global_images_9.6.27_20190627.0000.00_7.1_global
i fire up mi flash, it finds the device, i login and it says authorised for this computer
select the folder, set clean all and press flash, but it fails everytime, it says cannot not read from com port?
any ideas???
thanks,
mark.
I had same problem. Use Only Mi flash 2016.
not other 2014,2015,2018, or Beta.
Can your device to fastboot mode by press Power + Vol-. If you can, try to connect your device to Computer again in fassboot mode and make sure your computer has installed driver correctly for your device and make sure adb fastboot installed too.
check your device in computer, is it connected or not, if your device connected, you can flashing again with Mi Flash 2017
If you fail again flashing your device, I suggest you try final solution about flashing problem, it's should be open your phone backcover and try EDL point to connect your device with computer
gemadar said:
Help please,
My phone messed up when updating via orangefox, now wont switch on.
if i hold the power putton and plugin the phone i get:-
Qualcomm HS-USB QDLoader 9008 (COM10)
i have MI FLASH and have downloaded ugglite_global_images_9.6.27_20190627.0000.00_7.1_global
i fire up mi flash, it finds the device, i login and it says authorised for this computer
select the folder, set clean all and press flash, but it fails everytime, it says cannot not read from com port?
any ideas???
thanks,
mark.
Click to expand...
Click to collapse
Connect me on Whatsapp +9197Four3Eight338Zero8. I can guide you to recover.
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
gemadar said:
Help please,
My phone messed up when updating via orangefox, now wont switch on.
if i hold the power putton and plugin the phone i get:-
Qualcomm HS-USB QDLoader 9008 (COM10)
i have MI FLASH and have downloaded ugglite_global_images_9.6.27_20190627.0000.00_7.1_global
i fire up mi flash, it finds the device, i login and it says authorised for this computer
select the folder, set clean all and press flash, but it fails everytime, it says cannot not read from com port?
any ideas???
thanks,
mark.
Click to expand...
Click to collapse
If your Mobile is India Redmi Y1 with 32GB ROM.. Then its not ugglite.... Its UGG..... falshing ugglite bricked all the way to blinking light...!
Hi I recently try to flash a Stock Android One to my Xiaomi Mi a2 lite (Global Version of Redmi 6 pro).
I used Mi flashtool and I download a Fastboot Image file that matches my device model but my phone is bricked
the notification light is blinking when ever I push the power button. And I cannot know when my phone is charging there are no display that my phone is charging and when I press the Volume down and Power button I cannot access the Fastboot mode so I just simply attached my phone to the Computer and I shocked when I heared of a sound that my device was read by the computer but the phone is dead that time so I use the Miflash tool and It detect my phone but when I use powershell and command fastboot devices it doesnt recognized or detecting my phone.
So I decided to flash the rom to my phone because it can detect it, but Its taking too long to flash, 1500 seconds has passed but the flashing is not finish so I decided to unplug my phone but the xiaomi flash tool is still flashing so I thought that the app is corrupted so I just exit the app and open it again and do the flashing again but 2000 seconds has passed and still its the same thing I unplug the phone and the flashing still continue so I decided to stop it.
After some time I try to plug my device again but the computer dont recognized the phone anymore, the connected device sound has not triggered and the miflash tool has not recognized my phone anymore and the blinking notification light is not present too.
Please anyone help me I need this phone to attend my Online Classes please.
Similar situation here. Tried to flash Magisk. Stuck on a boot loop. Then I tried to flash Global a2 lite ROM.
Now my phone is stuck in EDL mode with 900E Drivers I see random numbers in MiFlash. When I install 9008 drivers I see the COM10 and the same random numbers on the device info in the MiFlash tool.
Taking like 30 minutes to flash and never ends. If someone has the Auto unbrick Mi a2 Lite software
please post it here so we can try to flash with this one.