Develop Bugs

[17Jun20][Guide] [P/Q]How to root Note10/Note 10+ & Flash TWRP (Exynos only)

How to Root Samsung Galaxy Note 10+ & Flash TWRP (Exynos Only)
NOTICE :
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with un rooting, some may never.
- All your data on device will be lost
- Flashing custom binaries may brick (Usually soft but can be hard brick too) your device, so follow it on your own risk!
If you are ready with condition, move further -
Click to expand...
Click to collapse
Important : Since android Q, there is changes in rooting process, specially if you needs root with TWRP, So here I am dividing this guide in two parts.
1.Root with self preparing files (No TWRP) - Here you needs to patch stock files yourself. No TWRP installed.
2.Root with TWRP - You needs to just flash pre-patched files, Here you needs to have ROM installed same base as per files available. Though mostly latest verson will be available.
PART 1 : (Root Pie/Q base with magisk with patching files yourself, No TWRP)
Before moving to root device, must read every single instruction given below as any small mistake can lead to fail to achieve root or may brick the device.
A.Preparing Root files
You need to patch file to flash using Odin to root device.
1. Download stock firmware for your device (google search will give you many sites to download it) some common are e.g. Sammobile, Samfirmware tool)
you need to download file according your region and model (Dial *#1234# will give you details of existing firmware, download accordingly)
2. Once you finish download, extract files and keep all files on PC. From extracted files a file with name AP_[device_model_sw_ver].tar.md5 copy to your device.
3.Download Latest Magisk Manager and Install to your device
4.Open Magisk Manager - Magisk (first one) - Install - select to "Select and Patch file" - Navigate file you have copied to device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar
6.Copy patched file magisk_patched.tar to Your PC
7.Download latest Odin (one is attached to end of this post) and extract to a folder on PC (I recommend on desktop)
Now next step is to modification on device
B. Unlocking Bootloader
This is a basic step to root device. Go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it.
(PS : If you don't see this option then you may need to wait up to 7 days or more to appear or may be on some operator you will get it never. Without this option you can not root your device, sorry!)
Once you have enable OEM unlock option, switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode,long press volume up to unlock the bootloader. This will wipe your data and automatically reboot
Now let finish setup and again enable developer options (as said above), and confirm that the OEM unlocking option exists and grayed out!
If it is not then you can not root device!
Once you see this option and greyed out, you are ready to flash custom binary and root your device
C.Installation (Flashing) custom binaries
1. Switch off the device and reboot to download mode (As said earlier) and select volume up to continue
2. Open Odin (downloaded from above instruction) as administrator
Select magisk_patched.tar file you have patched (as above instruction copied to PC) for AP tab of Odin
Select BL,CP and CSC file (Extract from stock firmware you have downloaded) with according respective tab of Odin (This is important, DON'T flash only magisk_patched.tar )
3.From Odin option - uncheck Auto Reboot option
4.Now start flashing and wait till it finish. When you see a PASS sign on Odin, disconnect device.
Now magisk is successfully finished but yet you need to follow instructions below.
D. Factory reset & Boot with magisk
After disconnecting device, keep holding Vol down + Side key to exit from download mode.
Here is very important - when you see device reboot As soon as the screen turns off, immediately press Volume Up + Side Key to boot to recovery partition. continue pressing the volume up button until you see the stock recovery screen.
In the stock recovery menu, use volume buttons to navigate through menus, and the power button to select the option. Select Wipe data/factory reset to wipe the data of the device.
Select Reboot system now, and immediately press Volume Up + Side Key. After seeing the bootloader warning screen, release all buttons so it can boot to the system.
The device will automatically reboot for the first time it boots. This is completely normal and done by design.After the device is booted up, do the usual initial setup. You shall see Magisk Manager in your app drawer; if not, manually install the APK you downloaded and continue to the next step. The app would be a stub and it shall automatically upgrade to the full Magisk Manager when you open it.
Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Voila! Enjoy Magisk
PART 2 : (Root Q base with TWRP)
This requires to have your device on same base as per base of pre-patch files. I am giving link below of my ROM
http://www.mediafire.com/folder/d4ugie4yadxu6/N975F - Click link - First select your device (N970/N975/N976) - download file Instructions_Root_TWRP_BootloopFix.pdf
This file have complete details about how to root with stock recovery/TWRP. Also all required patched files will be available in "Q" folder of your device section,
Also "Q" folder have file BASE_N97*.txt - Name of this file indicates Model and base used for patched files, you should have same base installed.
Important :
Due to the fact that some devices no longer uses ramdisk in boot images, Magisk has no choice but to be installed in the recovery partition. For these devices, you will have to boot to recovery every time if you want Magisk. Since both Magisk and recovery lives in the same partition, what you actually end up getting when you choose to boot to recovery will be determined by how long you press volume up.
(Powering up normally) → (System with NO Magisk)
(OEM Recovery Key Combo) → (Splash screen) → (Release all buttons) → (System with Magisk)
(OEM Recovery Key Combo) → (Splash screen) → (Keep pressing volume up) → (Actual recovery)
For more details read Installation guide by @topjohnwu from Here
All credit and thanks go to
@topjohnwu for magisk & Guide.
geiti94 for TWRP Here OP & Source
ianmacd for latest TWRP - Here OP & Source
Happy rooting!
Xposed
Just tried and eDxposed working fine.
- Install EdXposed installer
- from magisk download install Ritu-core module
- from magisk download install Ritu - EDxposed (yahfa)
Done.
We strongly recommend to make EFS backup as soon as you root device and store it to safer place

Don't you lose some Samsung function when you root and even relock the bootloader?

MrPhilo said:
Don't you lose some Samsung function when you root and even relock the bootloader?
Click to expand...
Click to collapse
Who cares?
Development can't go without this.
We developer need to risk it. No way.

Nice, already patched the rom to flash with odin. What is the button combination for recovery ?
Did that for a friend of mine on the S10e, guess the steps are all the same ??

Nice, so you will start to make roms ?
Keep it coming :laugh:

optx said:
Nice, already patched the rom to flash with odin. What is the button combination for recovery ?
Did that for a friend of mine on the S10e, guess the steps are all the same ??
Click to expand...
Click to collapse
OP updated for combo key

dr.ketan said:
OP updated for combo key
Click to expand...
Click to collapse
Many thanks, now i just have to wait for the Note 10+ to arrive in a few hours :highfive:

dr.ketan said:
Who cares?
Development can't go without this.
We developer need to risk it. No way.
Click to expand...
Click to collapse
Waiting for your guide, twrp, magisk and so on...
I am not developer, just tester, but still need root...

Dr Ketan. Most Welcome My Bro. Follow you since Note 9. U rock my bro :good:

namfat said:
Waiting for your guide, twrp, magisk and so on...
I am not developer, just tester, but still need root...
Click to expand...
Click to collapse
Twrp not available and possible only after samsung release kernel source code. Great news is @ianmacd getting N10 who known for twrp development. :good:

dr.ketan said:
Twrp not available and possible only after samsung release kernel source code. Great news is @ianmacd getting N10 who known for twrp development. :good:
Click to expand...
Click to collapse
That's really good to hear.
With you and the guy you've mentioned we have everything we need.
Cheers!

Did you have the OEM unlock right away in Developer options ? Cant see it on mine...
First Phone ever that has no OEM unlock right away ...

dr.ketan said:
Twrp not available and possible only after samsung release kernel source code. Great news is @ianmacd getting N10 who known for twrp development. :good:
Click to expand...
Click to collapse
OK then, please share root instruction first.
I dont know if N10 have the same problem but it happened with latest base on S10 5G that only using stock recovery if need rooted.
optx said:
Did you have the OEM unlock right away in Developer options ? Cant see it on mine...
First Phone ever that has no OEM unlock right away ...
Click to expand...
Click to collapse
My device have OEM unlock option available. If you dont have, maybe you need to wait for 7 days.

OP Updated with full instruction about how to root.
Kindly go through detail before proceed.

I'm assuming this is for Exynos version ONLY?
No where do I see this prerequisite posted anywhere but has always been in the past.

cpufrost said:
I'm assuming this is for Exynos version ONLY?
No where do I see this prerequisite posted anywhere but has always been in the past.
Click to expand...
Click to collapse
I have added to title but prerequisite is having OEM unlock enable which I believe not having on snapdragon isn't?

dr.ketan said:
I have added to title but prerequisite is having OEM unlock enable which I believe not having on snapdragon isn't?
Click to expand...
Click to collapse
So far with the SD when you go into developer mode there is no OEM unlock and I doubt it will show up later.

Don't know what is wrong. I have OEM turned on, Downloaded latest magisk manager, flashed all 4 parts. It did not work. If I flash stock, all is fine. Any clues ?

Pinu'u said:
Don't know what is wrong. I have OEM turned on, Downloaded latest magisk manager, flashed all 4 parts. It did not work. If I flash stock, all is fine. Any clues ?
Click to expand...
Click to collapse
OEM lock should be turned off AFAIK

Thx, will give it a try after flashing back stock.Irritating that OP says turn on ...

[Guide] Root Galaxy A10 Magisk prenormal rmm/kg state (October Patch- later)

Hi All this is just a quick tutorial to help you all root your devices, on later firmwares
This 100% works ive done it over and over without any problems. I am currently on october patch latest firmware for my A105FN. As you may know Samsung have now added extra security meaning even if you have already unlocked your bootloader after you patch the firmware with magisk, flash patched firmware and reboot you will be greeted with that dreadfull message, Only official binaries allowed and your device will be locked and wont boot untill you reflash stock firmware again. The below will help get you out of the prenormal kg state, and save's you a 7 days waiting period as we dont have any TWRP available for our device at this time. Also note due to the extra security magisk cant be flashed with the whole firmware no more, as each time you flash the firmware your back at square 1.
Note: You will need 7-zip - google is your freind
1. Download odin: https://odindownloader.com/download/odin3-v3-13-3.
2. download the latest stock firmware for your device via SamMobile
3. Download latest Magisk Manager - https://www.google.co.uk/amp/s/forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
4. Flash latest firmware via odin and let device boot up and finish setting up.
5. Grab Your Firmware AP_A105FXXXX.tar.md5 remove the md5 so its a tar file makes it easier to work with. Copy it to your device storage.
6. Install latest magisk manager, and open check advanced settings to make sure recovery is checked, select install image / patch image and select the AP file you put on your device, magisk will patch and save as magisk_patched on your internal storage. Copy this back to your pc and extract it.
7. Download this https://forum.xda-developers.com/attachment.php?attachmentid=4818715&d=1568308074 thanks to @droidzer1 and extract the vbmeta.img.
8. Make a new folder on you pc it's temporary so you know where your files are. From the Ap magisk_patch.tar you extracted, copy the boot.img, recovery.img, and the downloaded vbmeta.img from step 7. And place them in the new folder you created, using your mouse select all 3 and right click select 7-zip add to archive, select tar format and name it magisk.tar.
9. Now we have all the files ready back to your device, if your bootloader is already unlocked skip this step and move to the next. For those that havent unlocked there bootloader go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it, if the OEM switch is not there proceed to step 10. If it is and you enabled it it might ask you to factory reset if not it will be this way to complete the unlock bootloader.......
switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode, long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
10. Remove any account you have on your device go to settings, look for time and date automatic time zones, turn it off and set date back 8 days from now (example 30th today change date to 22nd) restart device. Now go straight back into automatic time zones settings and turn it back on. Again reboot device, when device reboots turn it off. You can now enter download mode and it should say checking instead of prenormal that means you good to go. Those of you that had no OEM switch in developer mode please now check.... if it's there enable it and go back to step 10 unlocking bootloader then proceed to step 11.
11. Open odin and select in the ap tab the magisk.tar you created earlier. Plug in your usb whilst holding vol-up and vol-down together to boot into download, press vol-up to proceed. Press start on odin and soon as it finishes and device reboots and you see the bootloader message hold power and vol-up until into stock recovery, select wipe factory reset then select reboot device, this the same as soon as you see bootloader unlocked message hold power and the vol-up together this time count to 7.... and release. Phone wont boot it will go blackscreen and reboot, dont worry this is normal, again do the exact same at bootloader unlocked msg screen hold power and vol-up count to 7... release, now phone will boot and you can set it up.
Note: you will need to reinstall magisk manager and on 1st open it will ask do to additional setup, let it do its thing, then device will reboot,
Remeber every time your device reboots you will have to do the power and vol-up to boot system with root.
I hope this guide help you and a big thank you to @afaneh92 for his original guide

thnaks man
how do i install twrp?
if it is possible, can i flash GSI?

tttt7hhhhjjjk said:
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
Click to expand...
Click to collapse
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.

mikeyb123 said:
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
Click to expand...
Click to collapse
thanks for the fast reply man :good:

I gave up rooting this phone, ended up bootloop 3 times and always has to flash it to get the phone working again

timba123 said:
Any chimeratool tricks for no oem unlocking in developer options? On a102u1
Click to expand...
Click to collapse
no.. chimera tool cant unlock the bl on usa variants

hello Thanks for this method but not working after install again magisk manager , say app magisk is not installed and not root
When I was creating the magisk_patch file with magisk manager go to advanced settings and check recovery mode
is it correct?

[HOW-TO-ROOT] [G770F/DS] Galaxy S10 Lite International Model

Models:
SM-G770F or SM-G770F/DS
Frequently used key combinations keys:
FORCE REBOOT: Hold "Volume Down" and "Bixby/Power" button.
DOWNLOAD MODE: With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. Release the buttons after you see the "Warning" screen and then press "Volume Up"
RECOVERY MODE: With the phone off, hold "Volume Up" and "Bixby/Power" button.
Some facts:
1. S10 Lite uses dynamic partition which means there is only one "super" partition (instead of "system", "vendor", "product").
3. S10 Lite uses A-only partition which means there is only one set of system partition.
3. S10 Lite uses 2 stage init (2SI).
4. KNOX will be tripped after you flash a custom image. As a result, Samsung Pay and Secure Folder will become permanently (even after restore to stock firmware) unusable and your warranty may be voided. However, many jurisdictions including the European Union has law mandating manufacturer to provide hardware warranty even if user modifies the software.
5. Samsung devices are almost impossible to hard brick (render the device unusable without a hardware-level repair) as critical sections including the bootloader are well-protected. However, if you do things incorrectly, you may soft brick your phone, but that can usually be resolved by resetting to factory settings (wipe data and cache) or restoring to stock firmware (check out Stage 4).
Tools needed:
On your computer:
1. Odin 3.14.4 or newer
2. Samsung Android USB driver
3. SamFirm or other tools/websites to download official firmwares
4. Android Verified Boot Metadata Image with verification disabled (vbmeta_disabled.tar)
On your device:
1. Magisk Manager (Canary builds)
Stage 1: Know your model and carrier code (CSC)
1. Open "Settings"
2. Go to "About phone" -> "Software information"
3. Pay attention to "Service provider SW ver."
4. Starting with "SM-", for example "SM-G770F", that's the model of your phone.
5. Immediately after that, there are two 3-letter code, for example "OXM_PHE". The second 3-letter code "PHE" is your CSC.
6. Remember your model and CSC.
Stage 2: Unlock the bootloader
WARNING: ALL data on your device, including apps, settings and files in internal storage, will be lost. You do not need to repeat this if you didn't re-lock your bootloader.
1. Open "Settings"
2. Turn on "Developer mode" by going to "About phone" -> "Software information" and pressing "Build number" for several times.
3. Go to main menu of "Settings" and at the bottom you will find "Developer options"
4. Go to "Developer options". You will find a toggle "OEM unlocking". Turn it on.
5. Skip to step 8 if your device reboots to "Unlock bootloader?" screen. Make sure the toggle is on and then turn off your phone.
6. With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. (don't use charging only cables)
7. Release the buttons after you see the "Warning" screen. Then, hold the "Volume Up" button.
8. You will see "Unlock bootloader?" screen. Proceed and unlock your bootloader by pressing "Volume Up" button.
9. Your device will be reset to factory settings. Proceed with the Setup Wizard. Only connect to network via Wi-Fi or cellular and skip everything else. (to save time as data will be cleared again later.)
10. Repeat step 1-4 to validate that "OEM Unlocking" is on. If it is not, turn it on.
11. Repeat step 6.
12. Release the buttons after you see the "Warning" screen. This time, press (not hold) the "Volume Up" button.
13. You will see "Downloading" screen. On the top left, there are some important info.
14. Pay attention to "OEM LOCK" and "REACTIVATION LOCK". If both of them are "OFF", you have unlocked the bootloader.
Stage 3: Disable Android Verified Boot
1. Reboot to DOWNLOAD mode. If you are already in the download mode, skip to step 2.
2. Download Odin 3.14.4 or newer and make sure Samsung USB drivers are installed.
3. Open Odin and put the vbmeta_disabled.tar into USERDATA slot and click "Start"
4. Your device will reboot but it will not boot into system as vbmeta signature has changed.
5. Your device will reboot into RECOVERY mode automatically and prompt "You have to reset your device to factory settings". Use "Volume Up" or "Volume Down" button to move and "Power/Bixby" button to select. Confirm and reset the device to factory settings.
6. This is the last time the data on the device has to be cleared. Afterwards, if you don't re-lock bootloader or re-enable the Android Verified Boot, you will not lose your data. Be aware, a stock firmware package contains a Android Verified Boot Metadata Image (vbmeta.img) with verifications enabled. You will need to flash the vbmeta_disable image (put into USERDATA slot) along with the stock firmware (use BL, AP, CP, CSC slots) to make sure AVB is not re-enabled and the data is preserved.
With bootloader unlocked and AVB disabled, it is now possible to boot modified images on the device.
(Stage 4 and below are method to root your phone using your own odin files, if you wish to use a prepatched for a faster way to get root, go to OPTIONAL)
Stage 4: Obtain the official firmware and upgrade
1. Open SamFirm
2. Type in your model and your region (CSC) and click "Check Update"
3. "Download" and you will get a zip file.
4. Extract it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
5. Check the version code, for example (G770FXXU2BTD2). The last 4 letters (BTD2) indicates the version of the firmware. If the version is the same as your current firmware, skip to Stage 5.
Your data will be preserved if you do it right but it is good to have a backup.
6. Open Odin on your computer and reboot your device to DOWNLOAD mode.
7. Put AP, BL, CP files in their Odin slots. It takes time to verify the firmware so be patient.
8. Put HOME_CSC file in CSC slot. Be careful here. Unlike AP, BL, CP slots, you should NOT use CSC file for CSC slot. Instead, you should use HOME_CSC file. CSC file contains partition table (PIT) which will erase all your data.
9. Put vbmeta_disabled file in USERDATA slot so AVB remains disabled and your data preserved.
10. Click "Start" and wait for it to finish. Allow the device to boot into system to complete the upgrade process. Do NOT interrupt/disconnect phones/hold button. It needs to complete the process without interruption or strange BUGs may appear.
Stage 5: Extract boot (kernel) image from firmware
If you are having trouble creating tar file, you can skip to Stage 6. (NOT RECOMMENDED as AP is basically full system image. It is huge (takes long time to flash/process) and Magisk may misbehave.)
1. Extract boot.img.lz4 from the AP file.
2. Use 7-Zip to create a tar archive which contains boot.img.lz4 only. (or "tar cvf boot.tar boot.img.lz4")
Stage 6: Patch the boot (Kernel) image via Magisk
1. Transfer the tar archive (or the AP file if you skipped stage 5) to your phone.
2. Open Magisk Manager.
3. Click top-right "Install" button
4. Make sure "Recovery Mode" is off in Options.
5. Click "Next" and select "Select and Patch a File" in Method.
6. Select the file you transferred to your phone in step 1.
7. Click "Next" and "LET'S GO".
8. Transfer the patched file (in Download/magisk_patched.tar) to your computer
9. Reboot the device to DOWNLOAD mode.
10. Open Odin, put patched file to AP slot and then click "Start".
11. After reboot, Magisk is installed and you will have the root access.
HOW TO upgrade the firmware
Repeat stage 4-6.
(OPTIONAL) Use prepatched magisk boot
1. Make sure that the model and firmware version of the pre-patched image is the exact SAME as yours.
2. Open Odin on your computer.
3. Reboot your device to DOWNLOAD mode.
4. Put pre-patched image into AP slot.
5. "Start"
BEWARE: PREPATCHED BOOT ONLY TESTED ON BTD2 ONEUI 2.1 FIRMWARE
(https://drive.google.com/file/d/1chFXa2w_t2EgbfQIiVDOVR2KUeiwFpUs/view?usp=sharing)
Telegram Support Chat: https://t.me/joinchat/FrDuSBgUxDGSZ1vVmej7fw

*reserved*

Thank you for this amazing guide and the file without which it would not have been possible.

Be sure to join my TG group, if you are interested in AOSP, there's a lineage build testing currently running.

Thanks for this.
But it really is the most difficult way to root i have seen.. I'm not sure how many will try all this just to root a phone.

Awesome

sosimple said:
Thanks for this.
But it really is the most difficult way to root i have seen.. I'm not sure how many will try all this just to root a phone.
Click to expand...
Click to collapse
This will be done by absolutely everyone who wants to root his Galaxy S10 Lite. ABSOLUTLEY EVERYONE!

hey guys i ve just bought s10 lite and rootted it with method upside. but i was apple user for a 3 years before that i used to note 3-4-5 series and it was easy to rootable also i was getting useable stuff like grenify or nice equaliser type apps. ı would like to know how can i enjoy my phone with rooted ? for example i have iphone x with me still and its jailbreaked and there are repo sites that help to get to download app or modules to make you happy with your phone. do we have such stuff in android going on right now ? thanks again for rooting and helps.

4TheBesT said:
hey guys i ve just bought s10 lite and rootted it with method upside. but i was apple user for a 3 years before that i used to note 3-4-5 series and it was easy to rootable also i was getting useable stuff like grenify or nice equaliser type apps. ı would like to know how can i enjoy my phone with rooted ? for example i have iphone x with me still and its jailbreaked and there are repo sites that help to get to download app or modules to make you happy with your phone. do we have such stuff in android going on right now ? thanks again for rooting and helps.
Click to expand...
Click to collapse
If you are not sure what's the purpose of rooting a phone you shouldn't be doing it. "To make you happy with your phone" is a really subject question with no right answer, that depends on your specific needs.
If you ask about modules check out Magisk Modules.
---------- Post added at 09:57 PM ---------- Previous post was at 09:52 PM ----------
Hello, just to confirm that the steps detailed in this guide works, thanks OP, at least this gives us more freedom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

no able to root with this method ! .. step ( v-meta disabler ) with system CP,AP,HOME CSC fail with official binary .. i follow you're steps !
i guess the file v-meta disabler u have attached is not compatible with my device ?! and yes i have same you'res BTD2 ONEUI 2.1 FIRMWARE

teenoo said:
This will be done by absolutely everyone who wants to root his Galaxy S10 Lite. ABSOLUTLEY EVERYONE!
Click to expand...
Click to collapse
In my case, I flashed latest FW (July 2020), Magisk Manager (the "install" buttons were not visible at first, but after some reboots they were). Created patched boot with Magisk Manager, unlocked bootloader (in settings & in bootloader), flashed modified boot image and it worked. At first boot, it restarted, and wen back to recovery, stating that system is corrupted, gave option to factory reset, so I did, it restarted again, and again, and then it booted fine. No VMBETA flashing needed. The trick, was (I suppose) doing the factory reset after flashing the modded kernel. Finally, when the phone booted, I did the usual first-run setup and enabled developer settings / adb installed Magisk Manager - it completed the setup, everything was fine after that.

Is there any way to unlock the bootloader and root SM-G770U1?

kamill85 said:
In my case, I flashed latest FW (July 2020), Magisk Manager (the "install" buttons were not visible at first, but after some reboots they were). Created patched boot with Magisk Manager, unlocked bootloader (in settings & in bootloader), flashed modified boot image and it worked. At first boot, it restarted, and wen back to recovery, stating that system is corrupted, gave option to factory reset, so I did, it restarted again, and again, and then it booted fine. No VMBETA flashing needed. The trick, was (I suppose) doing the factory reset after flashing the modded kernel. Finally, when the phone booted, I did the usual first-run setup and enabled developer settings / adb installed Magisk Manager - it completed the setup, everything was fine after that.
Click to expand...
Click to collapse
I was about to give up on the July update until I read this and tried a few more things. Bad internet caused missing "Install" buttons and I tried patched the WHOLE AP...instead of just patching a boot.tar like in Stage 5. So gooder internet, Odin-ing only the AP with the Magisk patched boot.tar, another wipe,
Code:
adb install .\MagiskManager-v7.5.1.apk
and I was rooty tooty.
I didn't care about burning everything on the phone. I think that some of the extra steps here were for trying to minimize the wipes. Thanks for the extra hope @kamill85 !

Are there download links for official images somewhere without paying? Everywhere i searched you needed to sign in and pay..
Thanks,

SamFirm
sosimple said:
Are there download links for official images somewhere without paying? Everywhere i searched you needed to sign in and pay..
Thanks,
Click to expand...
Click to collapse
Did you look up SamFirm like in the instructions? It pointed me to this page: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 That says it's deprecated but it was able to get me the July 2020 FW for the S10e. I didn't try the other thing, Updato that it points you to. I ran the exe in the zip and pushed a few buttons and it worked for me. No waiting 20 hours. Hope that helps!

dim42 said:
Did you look up SamFirm like in the instructions? It pointed me to this page: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 That says it's deprecated but it was able to get me the July 2020 FW for the S10e. I didn't try the other thing, Updato that it points you to. I ran the exe in the zip and pushed a few buttons and it worked for me. No waiting 20 hours. Hope that helps!
Click to expand...
Click to collapse
Thanks. What Deprecated meant? What iis the difference from original?

the show stopper said:
Is there any way to unlock the bootloader and root SM-G770U1?
Click to expand...
Click to collapse
+1
Also curious if anyone's gotten this working with the US version

So if i do this ill never ever be able to use Samsung pay ever again?

Vaughnn said:
Models:
SM-G770F or SM-G770F/DS
Frequently used key combinations keys:
FORCE REBOOT: Hold "Volume Down" and "Bixby/Power" button.
DOWNLOAD MODE: With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. Release the buttons after you see the "Warning" screen and then press "Volume Up"
RECOVERY MODE: With the phone off, hold "Volume Up" and "Bixby/Power" button.
Some facts:
1. S10 Lite uses dynamic partition which means there is only one "super" partition (instead of "system", "vendor", "product").
3. S10 Lite uses A-only partition which means there is only one set of system partition.
3. S10 Lite uses 2 stage init (2SI).
4. KNOX will be tripped after you flash a custom image. As a result, Samsung Pay and Secure Folder will become permanently (even after restore to stock firmware) unusable and your warranty may be voided. However, many jurisdictions including the European Union has law mandating manufacturer to provide hardware warranty even if user modifies the software.
5. Samsung devices are almost impossible to hard brick (render the device unusable without a hardware-level repair) as critical sections including the bootloader are well-protected. However, if you do things incorrectly, you may soft brick your phone, but that can usually be resolved by resetting to factory settings (wipe data and cache) or restoring to stock firmware (check out Stage 4).
Tools needed:
On your computer:
1. Odin 3.14.4 or newer
2. Samsung Android USB driver
3. SamFirm or other tools/websites to download official firmwares
4. Android Verified Boot Metadata Image with verification disabled (vbmeta_disabled.tar)
On your device:
1. Magisk Manager (Canary builds)
Stage 1: Know your model and carrier code (CSC)
1. Open "Settings"
2. Go to "About phone" -> "Software information"
3. Pay attention to "Service provider SW ver."
4. Starting with "SM-", for example "SM-G770F", that's the model of your phone.
5. Immediately after that, there are two 3-letter code, for example "OXM_PHE". The second 3-letter code "PHE" is your CSC.
6. Remember your model and CSC.
Stage 2: Unlock the bootloader
WARNING: ALL data on your device, including apps, settings and files in internal storage, will be lost. You do not need to repeat this if you didn't re-lock your bootloader.
1. Open "Settings"
2. Turn on "Developer mode" by going to "About phone" -> "Software information" and pressing "Build number" for several times.
3. Go to main menu of "Settings" and at the bottom you will find "Developer options"
4. Go to "Developer options". You will find a toggle "OEM unlocking". Turn it on.
5. Skip to step 8 if your device reboots to "Unlock bootloader?" screen. Make sure the toggle is on and then turn off your phone.
6. With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. (don't use charging only cables)
7. Release the buttons after you see the "Warning" screen. Then, hold the "Volume Up" button.
8. You will see "Unlock bootloader?" screen. Proceed and unlock your bootloader by pressing "Volume Up" button.
9. Your device will be reset to factory settings. Proceed with the Setup Wizard. Only connect to network via Wi-Fi or cellular and skip everything else. (to save time as data will be cleared again later.)
10. Repeat step 1-4 to validate that "OEM Unlocking" is on. If it is not, turn it on.
11. Repeat step 6.
12. Release the buttons after you see the "Warning" screen. This time, press (not hold) the "Volume Up" button.
13. You will see "Downloading" screen. On the top left, there are some important info.
14. Pay attention to "OEM LOCK" and "REACTIVATION LOCK". If both of them are "OFF", you have unlocked the bootloader.
Stage 3: Disable Android Verified Boot
1. Reboot to DOWNLOAD mode. If you are already in the download mode, skip to step 2.
2. Download Odin 3.14.4 or newer and make sure Samsung USB drivers are installed.
3. Open Odin and put the vbmeta_disabled.tar into USERDATA slot and click "Start"
4. Your device will reboot but it will not boot into system as vbmeta signature has changed.
5. Your device will reboot into RECOVERY mode automatically and prompt "You have to reset your device to factory settings". Use "Volume Up" or "Volume Down" button to move and "Power/Bixby" button to select. Confirm and reset the device to factory settings.
6. This is the last time the data on the device has to be cleared. Afterwards, if you don't re-lock bootloader or re-enable the Android Verified Boot, you will not lose your data. Be aware, a stock firmware package contains a Android Verified Boot Metadata Image (vbmeta.img) with verifications enabled. You will need to flash the vbmeta_disable image (put into USERDATA slot) along with the stock firmware (use BL, AP, CP, CSC slots) to make sure AVB is not re-enabled and the data is preserved.
With bootloader unlocked and AVB disabled, it is now possible to boot modified images on the device.
(Stage 4 and below are method to root your phone using your own odin files, if you wish to use a prepatched for a faster way to get root, go to OPTIONAL)
Stage 4: Obtain the official firmware and upgrade
1. Open SamFirm
2. Type in your model and your region (CSC) and click "Check Update"
3. "Download" and you will get a zip file.
4. Extract it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
5. Check the version code, for example (G770FXXU2BTD2). The last 4 letters (BTD2) indicates the version of the firmware. If the version is the same as your current firmware, skip to Stage 5.
Your data will be preserved if you do it right but it is good to have a backup.
6. Open Odin on your computer and reboot your device to DOWNLOAD mode.
7. Put AP, BL, CP files in their Odin slots. It takes time to verify the firmware so be patient.
8. Put HOME_CSC file in CSC slot. Be careful here. Unlike AP, BL, CP slots, you should NOT use CSC file for CSC slot. Instead, you should use HOME_CSC file. CSC file contains partition table (PIT) which will erase all your data.
9. Put vbmeta_disabled file in USERDATA slot so AVB remains disabled and your data preserved.
10. Click "Start" and wait for it to finish. Allow the device to boot into system to complete the upgrade process. Do NOT interrupt/disconnect phones/hold button. It needs to complete the process without interruption or strange BUGs may appear.
Stage 5: Extract boot (kernel) image from firmware
If you are having trouble creating tar file, you can skip to Stage 6. (NOT RECOMMENDED as AP is basically full system image. It is huge (takes long time to flash/process) and Magisk may misbehave.)
1. Extract boot.img.lz4 from the AP file.
2. Use 7-Zip to create a tar archive which contains boot.img.lz4 only. (or "tar cvf boot.tar boot.img.lz4")
Stage 6: Patch the boot (Kernel) image via Magisk
1. Transfer the tar archive (or the AP file if you skipped stage 5) to your phone.
2. Open Magisk Manager.
3. Click top-right "Install" button
4. Make sure "Recovery Mode" is off in Options.
5. Click "Next" and select "Select and Patch a File" in Method.
6. Select the file you transferred to your phone in step 1.
7. Click "Next" and "LET'S GO".
8. Transfer the patched file (in Download/magisk_patched.tar) to your computer
9. Reboot the device to DOWNLOAD mode.
10. Open Odin, put patched file to AP slot and then click "Start".
11. After reboot, Magisk is installed and you will have the root access.
HOW TO upgrade the firmware
Repeat stage 4-6.
(OPTIONAL) Use prepatched magisk boot
1. Make sure that the model and firmware version of the pre-patched image is the exact SAME as yours.
2. Open Odin on your computer.
3. Reboot your device to DOWNLOAD mode.
4. Put pre-patched image into AP slot.
5. "Start"
BEWARE: PREPATCHED BOOT ONLY TESTED ON BTD2 ONEUI 2.1 FIRMWARE
(https://drive.google.com/file/d/1chFXa2w_t2EgbfQIiVDOVR2KUeiwFpUs/view?usp=sharing)
Telegram Support Chat: https://t.me/joinchat/FrDuSBgUxDGSZ1vVmej7fw
Click to expand...
Click to collapse
Anyway to get to pass the safety nets?

Yes i pass safety net, but i use systemizer and with it i cant pass.
When I switch off systemizer in magisk I pass safety net

Need help rooting Samsung Galaxy A11 5F

Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.

yomamabinlaggin said:
Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.
Click to expand...
Click to collapse
I have managed to find this saviour.
https://forum.xda-developers.com/showpost.php?p=79106875&postcount=6
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
Click to expand...
Click to collapse
Just one thing to point out, 7zip did not work properly to extract the boot.img from boot.img.lz4. I used the solution in this answer. https://superuser.com/a/1533657
Now, let's see if I can patch the boot.img

How to ROOT and, but...
yomamabinlaggin said:
Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.
Click to expand...
Click to collapse
Hey there. I'm searchin' for TWRP for my A11 and no use.No one compile it and nobody can't write full f*****' guide how to build TWRP without any config file (or how to create 'em for building from 0). But honestly I'm not about TWRP.
Why do we need TWRP for Android 10!?
A: Samsung lock phones /system partition to Read-Only state. You can get root but you can't mount your partition as Read-Write, make changes in it. It's only waste of time.
How can I install ROOT for my samsung A**?
A: Very simple. I suggest you using Magisk Manager for it!
What do I need and what do I must do?
A:
1. You need unlock the bootloader of your phone (data will be lost).
2. You need original USB cable (from box of phone).
3. Yon need last firmware to your phone. (I'm using SamFirm or Frija)
4. Windows 7 or higher.
5. 7-Zip
6. Odin
How:
Stage I: Bootloader.
0. Remove all Google and Samsung Accounts
1. Make data backup (for recoverying)
2. Go to Settings -> Developer Options -> ADB Debug (set Enabled) (Search in web how to get Developer options Settings menu)
3. Go to Settings -> Developer Options -> OEM Unlock (set Enabled)
4. Turm off Phone and wait for 10 seconds.
5. Plug USB of Phone to your PC BUT PHON MYST BE UNPLUGGED!
6. Push and hold buttons: VOLUME UP and VOLUME DOWN and plug USB from PC to your Phone and still hold buttons!
7. When phon will be realy you'll see a light blue screen that ask you: Shall I unlock bootloader (Long press Volume UP), Shall I enter in download mode (short 'click' Volume Up) or I must turn off (Hold Volude Down)
8. Press and Hold VOLUME UP
9. On screen you'll se the message you'll unlock your bootloader... To hell Press POWER BUTTON.
10. Phone goes to reboot and start WIPING PROCESS!
11. That it. You unlocked bootloader. But will you install ROOT?
If so:
12. Make first setup of your phone but don't set google account and etc. Just make it working.
13. Go to Settings -> Developer Options -> ADB Debug (set Enabled)
14. Validate that's you've done everything right: Find OEM Unlock if toogle is gray and not responging to your actions then you've done right!
15. No download firware to your PC.
16. After you had downloaded firmware for your phone you'll fave few files you need file with prefix "AP_" open it with 7-Zip.
17. Get from it file: "boot.img.lz4" and put to some location at your PC.
18. Pack your "boot.img.lz4" with 7-Zip to "boot.img.lz4.tar" (YOU MUST USE *.TAR ARCHIVE TYPE)
19. Install Magisk Manager to your phone and put your archive "boot.img.lz4.tar" to location: Internal Memory/Download
20. Connect to WiFi and run Magisk Manager.
21. Make Kernel Patch with Magisk: Select: "Install Magisk" -> "Patch boot image" -> in file picker navigate and select "boot.img.lz4.tar"
22. (Magisk will do everything)
23. When it's done in folder "Internal Memory/Download" will be magisk_patched.tar copy it to your Windows.
24. (On PC) Run Odin as Administrator. And in tab "Options" unselect checkbox "Auto Reboot"
25. Turn off your phone and wait for 10 seconds, then Press and hold VOLUME UP and VOLUME DOWN and plug in your USB from PC to phone.
26. Phone will ask you what do need to do, just click VOLUME UP and you enter into Download mode
27. Odin must show you COM number.
28. Select as AP file "magisk_patched.tar" and press Start.
29. If you see PASS! in Odin - You've done! If ERR! then you failed to unlock the bootloader!
30. Now turn of fyour phone and enter into Recovery Mode (on turned off phone hold POWER + VOLUME UP)
30.a. If you failed to enter try in with ADB command: 'adb reboot recovery' (no quotes)
31. In Recovery Mode Make: Factory reset + Clear Cash partition.
32. Power on your phone. Again make FULL PHONE SETUP an reinstall Magisk Manager
33. PROFIT!

[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)

[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****

Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?

stylemonument said:
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
Click to expand...
Click to collapse
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Please see here: Bootloader Unlock Service For US Variants

BoiBundy said:
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Click to expand...
Click to collapse
Okay.... let me do that. Thanks.

Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk

Msgd re: oem unlock! Btw, if we got any awesome Sam sec experts out there who wouldn’t mind entertaining some qs from me regarding a lot of WEIRD stuff happening w my phone, be eternally grateful. Could even work out a monetary deal for your time, and (perhaps) help!
Thanks much in adv, msg on telegram as @nemotheDreamer.

butchieboy said:
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
You might be right, I will edit it tonight

So we can legit root the Snapdragon version now?

Nickdroid86 said:
So we can legit root the Snapdragon version now?
Click to expand...
Click to collapse
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.

cerj said:
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
Click to expand...
Click to collapse
Thanks man, wanted to have a central "fool-proof" way for people to enjoy the freedom of root

Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?

MonkeyJug said:
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
Click to expand...
Click to collapse
Check Here: https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/

I've been on Nexus and Pixel devices so long now I cannot remember much about modification on Samsung devices. Last one I had rooted was the Note 2. Anyway, bootloader unlocked and successfully rooted my SM-N975U (Note 10+). Now there are updates available so I am sorry if this isn't the place or if a dumb question, but is there any special way I need to do updates on the snapdragon so I don't relock the bootloader or lose root? With Pixel, ADB sideload was easy, not sure with this one.

Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.

nabnab25658 said:
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
Click to expand...
Click to collapse
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me

Dick_Stickitinski said:
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Click to expand...
Click to collapse
Hey, just wanted to thank you for pointing me in the right direction. I've had my Sm-976V BL unlocked and rooted for a bit now, but have been busy hence the late reply.

I have an issue. I boot into TWRP just fine but all my files in sdcard are nothing but random numbers and letters

I think this happens when you don't wipe your data. You also need to flash a decryption file. It happened to me at first because I didn't wipe all data.[/QUOTE]

BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
which TWRP version to flash and which odin? hope i can get answer i had N975U1 unlocked bootloader

Anyone else getting that pesky "Android 11 Update" since they have rooted? I keep postponing it. I'm guessing it will fail if I try to install. Not sure what I should do.
Sammobile don't seem to have the firmware available yet. I was thinking installing it with odin then patching AP with Magisk

BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
it works on my N975U1 android 10 Q version 1st method so no need 2nd method