Related
OK I was trying to flash an unlocked kernal via ODIN last night, something went wrong and now phone is stuck on the phone--!--computer screen. I cannot get past this screen. vol+home+power doesn't do anything but loop to the same screen.
It shows ODIN MODE in red at the top of the screen, but ODIn won't recognize the phone, nor will Kies (not running at the same time). Computer makes USB connected/disconnected sound when I plug and unplug the phone.
I have tried One-Click Unbrick, did not recognize that phone was connected.
Help!!
which model of Galaxy S2 do you have?
T-Mobile SGH-T989
hose902 said:
T-Mobile SGH-T989
Click to expand...
Click to collapse
there''s currently nothing to flash this phone
it came out only 2 days ago
DEV are still working on finding root
so, the best suggestion is to take it back to the store and get it exchanged
or wait a few more days/weeks until a flashable release becomes available to fix the mistake
I know, I was hasty and now this. Even when there something available to flash, the device isn't being recognized by ODIN. Any troubleshooting help for this?
When I managed to get my Vibrant into that mode I could pull the battery, hold volume up, put the battery in, press and release power (still holding volume up) and it'd kick back into download mode everytime. Once in download mode I could plug the USB in and a running ODIN would see it pop up. If ODIN wasn't running and USB was already plugged in things wouldn't work right.
I haven't tried ODIN on the GS2 yet (I'll wait for a root ). I did find the vibrant nearly impossible to brick though... trust me I unexpectedly tried quite hard.
You might need the newest ODIN for GS2 support, and possibly newer drivers.
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
fix4tv said:
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
Click to expand...
Click to collapse
I'm a bit new to this, but a custom ROM shouldn't affect your recovery mode. Are you sure you are using the correct buttons and methods to boot recovery?
Might want to make a new thread instead of necroing something from when the phone was 2 days old.
I have GT I9100 and done the same thing and got the same result . stuck at setup connection with odin
Please Help
Go into device manager when is plugged in and if it says qhd-usb or something like that its a hard brick. What tipped me off was you said it makes two noises when you plug in. that's a tell tell sign your hard bricked
Sent from my SGH-T989 using xda premium
soft bricked my phone (i hope)
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
iamnoone626 said:
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
Click to expand...
Click to collapse
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Alarmmy said:
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok i have done this through kies is there another way that you can do this?
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
nagoshi said:
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Click to expand...
Click to collapse
when i do this it only takes me to download mode.
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Sk3tchy said:
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Click to expand...
Click to collapse
i tryed this but still odin does not recognize my phone. (no yellow box shows up)
EDIT: Sorry, this post wen't to completely wrong place. Hope some mod can move this to right section.
I know. There's number of similar threats. I have read them all. Or at least feels like it.
I managed to soft brick my sgs2. I was playing with this new lol boot (dual boot app) from market. I think I pushed something wrong in this app. After that my intention was to make a CWM backup before I start to play seriously with lol boot. At the second I pressed backup from the menu, my phone shut down. Now I'm in a sitsuation whre I can't enter recovery mode. There's just this Samsung Galaxy logo. At the time I had CheckRom v4 installed.
My intention was to flash stock rom via odin. I can enter to download mode just fine BUT odin or kies isn't able to connect to phone. Kies is recognizing the usb connection, but fails to connect it properly. Here's a list what I've tried so far:
- Restart PC (100x)
- Restart Odin (101x)
- Restart Kies
- Reinstall USB Drivers (with Kies and without)
- Trying different computer which has never seen Kies or any Samsung USB drivers
- Reinstalling Windows (W7 x64)
- 3 different USB cables (2 stock Samsung)
- Different USB ports
- Also Nexus S USB drivers as mentioned on another thead in XDA
- Starting odin after USB connection, and before
- Googling with any keywords I have come up
Is there anything else I can do for now?
you mean when you try to connect to odin there is no yellow square ?
maybe try to remove battery for + 90 sec and try to enter in odin ?
ps in this situation you must forget kies since its barely work when everything is fine with the phone ...
Thanks for your reply. Odin doesn't 'do' anything when i connect my device. I'm using version 4.43. When I connect s2, windows install two drivers, Samsung Mobile USB CDC Composite Device and Samsung Mobile USB Modem. I also tried taking battery off. Actually the battery wasn't attached for 6 hours, still no success.
I didn't see this in your list, but have you tried entering download mode and connecting?
Sent from my GT-I9100
can you enter recovery? which recovery you have? Clockwork? 2e, 3e?
Just trying to feel out your situation...
Guys. I think there is some Android God that came to help me. After ~36 hours of googling, crying and throwing the phone to the wall, I've managed to solve my problem! As I was googling cheap shotgun for me, I had a vision. Why not, let's try older odin. The solution was v1.83. And right when I plugged in my phone with this odin, it got recognized! At the same second! Nuff said, I'm satisfied. And do you know what is the best part? I flashed with original stock rom and every app, every launcher and so on was STILL WORKING and running!
Thanks to everyone. I'll be more careful next time!
EDIT: How the heck the custom binary counter went to zero? I was thinking its only possible with usb jig?
not older odin! but the one u need for sgs2 (and 1) only use odin 3 v. 1.83 or v. 1.3.
The one you said IS NOT FOR YOUR PHONE. Sorry I missed that text.
So if I understood you correctly, u are saying that I flashed my phone with wrong version of odin (1.83) ? Sorry, I'cant understand english too good, so can you say your point more literally and s_l_o_w_l_y? Thanks
I only use odin3 v1.3 or odin 3 v.1.83.
As far as I know, you cannot use anything else, since it is not made for your device!
I might be wrong, if so, somebody correct me.
Sent from my GT-I9100
So if you're correct on this, the reason why I couldn't get my phone recognized was the wrong version of odin?
pazzio said:
Guys. I think there is some Android God that came to help me. After ~36 hours of googling, crying and throwing the phone to the wall, I've managed to solve my problem! As I was googling cheap shotgun for me, I had a vision. Why not, let's try older odin. The solution was v1.83. And right when I plugged in my phone with this odin, it got recognized! At the same second! Nuff said, I'm satisfied. And do you know what is the best part? I flashed with original stock rom and every app, every launcher and so on was STILL WORKING and running!
Thanks to everyone. I'll be more careful next time!
EDIT: How the heck the custom binary counter went to zero? I was thinking its only possible with usb jig?
Click to expand...
Click to collapse
gratz!
to reset your binary, there is only one way to do it. u are right, usb jig.
however, beware, i read somewhere saying that GB ver 2.3.4 onward has a new version of bootloader which prevent usb jig from resetting the counter, which mean samsung is trying to lock the bootloader now. however, flashing the old bootloader still helps (claim by others).
Hello.
I've tried to update from leak 4.1.2 to final version but bricked the phone. Everything went well until restart. Progress bar in recovery went to the end, odin told that it's finished and it restarts the headset (green square) but the phone did not started.
Battery is OK, the phone does not start in normal mode nor in recovery ( +vol- +home +power) however, when i try to run recovery and the USB cable is plugged, my PC says that new device is found ("u8500 usb rom")
Odin dont see the phone.
Is there something that may help?
EDIT: ok, I found that in most cases only sending the phone to retailer will help. Please, anyone know if after they reflash the board they will know that I flashed the phone in past? (flash counter was "2" )
Can u enter the download mode and try a reflash? I got the same Problem with my first ace 2. Under jellybean the touchscreen did not work anymore and gingerbread wasnt able to Boot (downgrading and upgrading With pit file worked a lot of times before). Then i tried „heimdall" (an alternative To Odin) and.... Totally bricked my phone... No download mode Or something and the phone wasnt able to turn on. But Samsung gave me a New phone and because the download mode didnt work they couldnt check the flash counter....
forgottnxd said:
Can u enter the download mode and try a reflash? I got the same Problem with my first ace 2. Under jellybean the touchscreen did not work anymore and gingerbread wasnt able to Boot (downgrading and upgrading With pit file worked a lot of times before). Then i tried „heimdall" (an alternative To Odin) and.... Totally bricked my phone... No download mode Or something and the phone wasnt able to turn on. But Samsung gave me a New phone and because the download mode didnt work they couldnt check the flash counter....
Click to expand...
Click to collapse
Found several methods to unbrick. Quite cheap (first 2 $ jig second 20$ jtag). My man at Samsung says that it is possible to read flash counter even at hard-brick state so Sammy service is a last resort
Will update if it works
They can check flash counter when phone is hard brick? Put cable from wall into ace 2 usb port - you burn it. Then they cant check.
piecho said:
Hello.
I've tried to update from leak 4.1.2 to final version but bricked the phone. Everything went well until restart. Progress bar in recovery went to the end, odin told that it's finished and it restarts the headset (green square) but the phone did not started.
Battery is OK, the phone does not start in normal mode nor in recovery ( +vol- +home +power) however, when i try to run recovery and the USB cable is plugged, my PC says that new device is found ("u8500 usb rom")
Odin dont see the phone.
Is there something that may help?
EDIT: ok, I found that in most cases only sending the phone to retailer will help. Please, anyone know if after they reflash the board they will know that I flashed the phone in past? (flash counter was "2" )
Click to expand...
Click to collapse
Hi, I had also hard bricked my phone some weeks ago. You can read it here.
http://forum.xda-developers.com/showthread.php?p=39350626#post39350626
Now is my phone back, 100% working. I was very surprised, the flash counter was still saying "2". Probably, they have no time to check it. Or for service station is it OK to have more business. I did not pay any money.
I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!
Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)
Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2
Have already done that. But just for laughs, I did do it again with no change.
can you get your D700 into download mode as described above?
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.
niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....
Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.
Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
...
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
update!!
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
update
chatovishious said:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
Click to expand...
Click to collapse
spammy l said:
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
Click to expand...
Click to collapse
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Gladi80rPrincess09 said:
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Click to expand...
Click to collapse
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
help me!
chatovishious said:
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
Click to expand...
Click to collapse
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Gladi80rPrincess09 said:
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Click to expand...
Click to collapse
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Thank you! progress/update
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Gladi80rPrincess09 said:
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Click to expand...
Click to collapse
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
question
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
CCallahan said:
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
Click to expand...
Click to collapse
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Gladi80rPrincess09 said:
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Click to expand...
Click to collapse
Can you get the device back in download mode?
update!!
CCallahan said:
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Gladi80rPrincess09 said:
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Click to expand...
Click to collapse
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
thank you for the help!!
chatovishious said:
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
Click to expand...
Click to collapse
i got it to work!!!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Hey! Still stuck?
Poebat said:
Hey! Still stuck?
Click to expand...
Click to collapse
No according to the post above yours.
koop1955 said:
No according to the post above yours.
Click to expand...
Click to collapse
K. Sometimes something appears to work and then fails :/ happens sometimes
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Gladi80rPrincess09 said:
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Click to expand...
Click to collapse
nothing wrong with rooting if you know what you're doing. ?
Sent from my SM-G900P using Tapatalk