Related
Hi people.
I have a smart TV android, Thomson percee tv, 65" (65UD6406 S).
Happens that it remains on android animated loading screen, forever. I guess that I messed up, when in developer mode, clicked on (somewhere in "showing pointer" (or something similar), in developper menu, that I had activated months ago)... It automatically turned off, and then tried to restart, without results.
Tried to unplug, but still doing the same)
Can't do any kind of factory reset, as the TV hasn't any physical buttons.
Region is Europe, Portugal.
Edit:
Found hidden power button behind "standby led".
Unpluged cord line, and while pressing down power button, pluged it again, waited for about 15 seconds, and an image with the android robot, appeared, with the message "error".
Downloaded the updatee file (V8-T658T01-LF1V543.zip) from manufacturers site to a memory stick (fat32, 8 Gb), and did the same as before.
This time the updating menu appeared, and went throughout the whole updating process.
But when booting, android boot animation logo was there forever, as before.
What should i do to fix it?
Is there a way to replace all the firmware, instead of updating, like as installing a ROM in a smartphone?
Thanks in advance for any answer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit (again)
Ive done it at last.
Inserted the stick, and while pressing "power" button, connected the cord to the wall socket.
Waited a few seconds, and got a message, saying that there was no software present to do the update
Ignored it, and kept waiting... after a short while the message changed, and the updating bar showed up.
Waited to it ro run till the end, and the animated image of Android loading appeared
To be honest, I hadn´r any faith that it would make it... but it worked, at last!!!! It booted successfully.
So.... I guess the problem was with the message. It was saying me that there was no software, then i gave up a few times, taking out the stick. This time I ignored it, and it changed a few seconds later.
same problem
I have a same problem i activate showing pointer, and android not load, i update with last version download from thomson a but like you said it does the update but doesn't reset the android settings. I tried to insert a pendrive without software to do what you say, but after it comes out the message that it doesn't find the software starts loading android and it still doesn't start.
Can you tell me again what you did to reset the TV . Thanks
I downloaded several times the software, and tried to repair the TV sftware with no avail.
I didn't mention that my TV was in warranty yet, and called "Thomson" in Portugal.
A guy came to my home, and said the updating software was exactly that one i had downloaded, but was needed an addictional one to repair first. He had it, was necessary use two different sticks, one to repair, and other (the one I had) to update (reinstall).
But even his repairing software, showed a message, saying there was no software in the pen drive, however, he ignored it, and kept waiting. Then, in a minute, or so, later the process began to run.
After that was done, he took out that pen, and inserted the second, and the process ran well till the end, and everything became normal.
When I was talking with Thomson dealer on phone, I asked them to provide me the .zip file to repair it myself, as I had enough knowledge to do it, if i had it. But they denied, saying that they were not authorized to do it, because that stuff is only for credited technicians of the brand (They could have avoided to travel 200 km to come personally to my home).
I hadn't mentioned the technician before, when editing, because no one answered the post, and I guessed I was the only one with that kind of TV.
Anyway, it was completely free, as it was in warranty yet.
PS: To enter in contact with the technician, I called the store where I bought the TV, then they put me in contact with Thomson Portugal, and they told me to do (what i already had done, as you also did).
Told them it didn't work... then we combined the date for him to visit my home (the day after).
EDIT:
If you don't mind to try again... download the update file from https://www.mythomson.com/fr_fr/television-73-fr-fr/tv-uhd-86-fr-fr/serie-d64-4257
If the link doesn't open correctly from the forum, copy the link, and paste it on your browser search bar, this way, it will open well.
Scroll down the page, to access "Download"
After it is done, open the zip file, and IMPORTANT, read the directions on txt file.
I guess you have to unzip, and then get another zipped file. This last file, is not meant to be unzipped (is the update file).
You must format the USB stick (FAT32), before put the file in it (in the stick, must remain only this one file).
On tv, if you get a small black and white rectangle, with a message, saying there is no update data in the stick, ignore it, and wait anyway.
If it doesn't work... call the technician, or perhaps someone in XDA forum, can provide you better info.
I would be glad if you solved that.
ALbert76 said:
same problem
I have a same problem i activate showing pointer, and android not load, i update with last version download from thomson a but like you said it does the update but doesn't reset the android settings. I tried to insert a pendrive without software to do what you say, but after it comes out the message that it doesn't find the software starts loading android and it still doesn't start.
Can you tell me again what you did to reset the TV . Thanks
Click to expand...
Click to collapse
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Hdr videos on youtube are washed out after upgraded to latest v568..anyone know how to fix this issue. Thanks
Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
This solution works for me. Thank you very much.
Released is newer PKG file V574.....
http://celesw.tcl.com/CSEU%20TV/Software/MT58/V8-T658T01-LF1V574_PKG_USB_GMC.zip
and also OTA update....
http://www.mediacenter.tcl.eu/uploads/common/MT58_Android%20O_V574.zip
or V575 PKG....
Google Drive - Virus scan warning
drive.google.com
Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
Thank you man it works good
Hi all
got the same problem on my TCL. I've tried the Update.pkg onto a usb stick. No way... Got only a picture with red cross and "error!" message... some ideas?
kelly-x974 said:
Hi all
got the same problem on my TCL. I've tried the Update.pkg onto a usb stick. No way... Got only a picture with red cross and "error!" message... some ideas?
Click to expand...
Click to collapse
Your present firmware installed ?
Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
stasiof said:
Released is newer IMG file V574.....
http://celesw.tcl.com/CSEU%20TV/Software/MT58/V8-T658T01-LF1V574_PKG_USB_GMC.zip
and also OTA update....
http://www.mediacenter.tcl.eu/uploads/common/MT58_Android%20O_V574.zip
Click to expand...
Click to collapse
Do these firmwares work on 49UC6406?
strollaco said:
Do these firmwares work on 49UC6406?
Click to expand...
Click to collapse
Your present firmware installed ?
stasiof said:
Your present firmware installed ?
Click to expand...
Click to collapse
My tv shows the following:
Software version: V8-T658T01-LF1V570
SO TV+ version: V5.0.0(V8-2004241-MF1V500)
Yes, is works...
Latest is V8-T658T01-LF1V575.
Hello, i have TCL 55UC6406 with the same issue. TV will stuck on boot logo. I tried to update the firmware using USB stick, but without luck. Tried different versions, different usb sticks, but the update procedure will not start.
Procedure
1. Unplagged TV from wall socket
2. Inserted USB stick (formatted to FAT32) with Update.pkg file in root.
3. Press and hold power button on TV, than plugged to the wall socket.
4. Released the power button when "Thomson" logo appeared.
Nothing happend. No updating, no message. TV will start up and will stuck on boot logo again. Tried with hardware button on tv, power button on remote control, tried to release the button earlier, later, but nothing happend. When i try to hold the power button longer, TV wil turn off and on again. I dissasembed TV to reconnect all the cables - without luck. Version printed on sticker is V8-T658T01-LF1V353.
Any ideas ?
Thank. Mukates.
USB 2.0 stick in USB 2.0 TV port?
Try this:
Update_V8-T658T01-LF1R579_sign.pkg
Shared with Dropbox
www.dropbox.com
stasiof said:
Yes, is works...
Latest is V8-T658T01-LF1V575.
Click to expand...
Click to collapse
It worked. Thanks you.
stasiof said:
USB 2.0 stick in USB 2.0 TV port?
Try this:
Update_V8-T658T01-LF1R579_sign.pkg
Shared with Dropbox
www.dropbox.com
Click to expand...
Click to collapse
Did not work :-( I think that the mainboard is faulty. Different USB 2.0 sticks in port 2.0 (service port), but update never started.
stasiof said:
Released is newer IMG file V574.....
http://celesw.tcl.com/CSEU%20TV/Software/MT58/V8-T658T01-LF1V574_PKG_USB_GMC.zip
and also OTA update....
http://www.mediacenter.tcl.eu/uploads/common/MT58_Android%20O_V574.zip
Click to expand...
Click to collapse
Yes, this last firmware version worked on my Thomson 50UD6426.
The same issue as all of you here - stuck on boot Thomson logo.
Lubo-mir's instructions worked like charm.
Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
Thanks. That really helped me today on my 49UC6406 stuck on booting.
I got the V8-T658T01-LF1V574_PKG_USB_GMC.zip from the resource you provided (impossible to find a direct link on Thomson/TCL website).
Good day,
I have got TCL Android TV model No. L55C8US with software version: V8-R851T02-LF1V252.011680
I want to downgrade software version to: V8-R851T02-LF1V187.008562
My questions are:
1- Is it possible?
2- Where can I get this version (V8-R851T02-LF1V187.008562)?
3- how can install the version into the TV?
Your feedback is highly appreciated.
Regards.
Yes. It's possible.
Celesw.tcl.com/Test/software/V8-R851T02-LF1V187.rar
Why to downgrade? There's v322 near by.
coolek33 said:
Yes. It's possible.
Celesw.tcl.com/Test/software/V8-R851T02-LF1V187.rar
Why to downgrade? There's v322 near by.
Click to expand...
Click to collapse
Thank you for your reply. My friend has got same TV with older version and my observation is the Brightness and 4K Videos is better than in latest versions.
coolek33 said:
Yes. It's possible.
Celesw.tcl.com/Test/software/V8-R851T02-LF1V187.rar
Why to downgrade? There's v322 near by.
Click to expand...
Click to collapse
Would you tell me how do I proceed with installing the software to the TV?
I downloaded the software file that has provided by you and I copied to USB flash drive after format FAT-32.
when I'm trying update local mode it shows error box, it says that No avaliable update file please insert USB device with software package.
I'm very sure that the USB is healthy and it's recognized by the TV.
Please help.
If it's in update.img format:
Hold power button on remote and choose power off. Or power off normally and und unplug the TV from from power.
Next with flash drive plugged to usb power on TV by press and hold the physical button on TV (not remote) until the led light on TV starts to flash. And wait.
It can question about older firmware so you have to agree.
coolek33 said:
If it's in update.img format:
Hold power button on remote and choose power off. Or power off normally and und unplug the TV from from power.
Next with flash drive plugged to usb power on TV by press and hold the physical button on TV (not remote) until the led light on TV starts to flash. And wait.
It can question about older firmware so you have to agree.
Click to expand...
Click to collapse
Thank you for your reply. I did exactly what you advised. But still it didn't proceed with the installation. Please find video url it would explain the problem.
https://drive.google.com/file/d/1PHLNzio6p7ntoYMe4xaqSxfQHeMLquDB/view?usp=drivesdk
Please advise.
Gohamad said:
Thank you for your reply. I did exactly what you advised. But still it didn't proceed with the installation. Please find video url it would explain the problem.
https://drive.google.com/file/d/1PHLNzio6p7ntoYMe4xaqSxfQHeMLquDB/view?usp=drivesdk
Please advise.
Click to expand...
Click to collapse
It's done! Software file (update.img) it has to be directly in USB-flash drive without sub-folder.
I recommend to install this version V8-R851T02-LF1V187.008562 instated of the latest one because the Brightness and 4K Videos is better and more clearly.
Thanks all.
Hi i recently buy tcl 55c8 model when i play any shows or movies it playback as smooth motion i have to disable it. I also trying to downgrade or update software and also try different picture settings like movie or judder reduction but still video play in smooth motion or with memc. If any one know how to disable it please let me know. and also audio and video are not in sync so please help me to sort out this problem.
Gohamad said:
It's done! Software file (update.img) it has to be directly in USB-flash drive without sub-folder.
I recommend to install this version V8-R851T02-LF1V187.008562 instated of the latest one because the Brightness and 4K Videos is better and more clearly.
Thanks all.
Click to expand...
Click to collapse
Hi you have the firmware file for this TV. Please share if you have thanks.
Ashsoni said:
Hi you have the firmware file for this TV. Please share if you have thanks.
Click to expand...
Click to collapse
All versions discuss here is very OLD !.
Look for latest firmware (V727) in this thread.....
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
@stasiof , thanks for reply this version will works for my TV? Model is tcl l55c8us.
@stasiof, I am not able find zip file can you share me link please.
I posted you thread where to look....post....#4,241
Edit:
V8-R851T02-LF1V727 OTA
Hi,
My problem is with 65P815. Fabric software was v084, i tried to update to V191 official version from TCL page, but after update and turning off TV, there is nothing shows on screen. I hear only sounds, and remote clicks, menu gone etc.
I search for info, and go back to v083 software, that helped and fixed TV. But now I don't know what to do to fix my TV. Tried to update with factory reset, nothing helped. Any tips how to deal with it ?
Next thing is concerned with soundbar thing, I have LG soundbar, is it possible to control soundbar over TCL's remote ? On my old Samsung TV it worked normally.
Here in TCL I don't see option to choose sound sourec (tv speaker/optical/hdmi), there is no option to mute TV speaker and move sound to soundbar. For now I use 2 remotes, but I want to use only one like in Samsung. I connected soundbar with optical cable to my TV.
Hi there. Trapped into same thing. After flash, I can hear 'bing' when you navigating in menu, backlight is working, but screen still black. Tried to flash V191(Inserted stick to USB2.0 with Update.img and plugged in with power button pressed). But got same thing. Led is blinking during i suppose flashing, but after that - nothing. Can it be somehow reset to stock or whatever?
you have to go back to 0.83
Turn off the TV, plug out the cable. put the drive into usb 2.0, press power button on TV's back and plug in power cord, if led start blinking wait about 10 mins to finish flashing. Sometimes you have to do this twice and TV will be ok.
Write to TCL support about your problem, let them prepare patch
Hmm... I have couple of questions then.
Does that mean v083 firmware didn't published somewhere?
And does that mean that we can't update 65p815 to any new firmware with Android 11?
what was your native FW ?
I tried to update to V191 which is on android 9, and update was failure. There is something wrong with the FW
File upload and sharing. Large file transfers. Free online cloud storage.
Visit this link to download: V8-R51MT02-LF1V083.zip
files.fm
here you can find v0.83
Android 11 is in beta now, we have to wait for official final update
I didn't check my original fware version. I know that was very stupid, but i supposed that just platform is matter.
Thanks for link. Will try this fware. Hope that will help, because i don't like to waste time with support, that usually just redirects to another operator...
it should, try second time if the first will failure
Ok, i just finish downloading and i'll start bring that baby to life. Thanks for help. Will report if suceed.
report it to TCL support to make technical request, and to fix that firmware
Ok. Just flashed twice. God damn, you have been right! All works like charm!
If someone will be as "lucky" as me, steps are next:
1. Load to local pc zip from above.
2. Format flash stick with FAT32 and copy it to root.
3. Insertt stick into USB 2.0 port.
4. Turn off TV power physycally.
5. Press and hold On/Off button on a TV's back and plug TV holding button pressed.
6. Hold for 10 secs, the led in front of TV will start blinking - it is ok.
7. Wait till it will stop blinking and wait some 5 mins after that.
8. Repeat steps 4-7. After TV restart it will show TCL logo and Android welcome screen will appear.
Ok now we should think about how to flash properly new version of FW,
latest official firmware is
https://www.mediacenter.tcl.eu/uploads/common/R51M_Android_P_V191.zip
When I try to flash with it, from menu update/local it works but only first time. When I turn off TV, then screen is black
I found such instruction, what to do after installation
Press the Settings button in the remote control:
Press OK on the icon: Picture.
Then go to the line Advanced settings.
Scroll down to the line: Brightness settings.
Scroll down to the line: Contrast.
With the remote control, do the key sequence: 6 4 2 5
The special menu appears.
Go to the line “Reset All” and press OK.
Go to the line “Reset Shop” and press OK.
Now unplug the main power cord.
Wait for ~2 minutes.
Plug back the main power cord and perform complete installation.
Click to expand...
Click to collapse
but haven't tested it yet.
Guys, can you post "Project ID" of your P815?
As ,for firmware V191 supose to be as attached....
50P815.....285
55P815.....284
65P815.....283,305
TV panel type can be found in service menu.....Main menu (1950)...
Just grabbed my panel name.
stasiof said:
Guys, can you post "Project ID" of your P815?
As ,for firmware V191 supose to be as attached....
50P815.....285
55P815.....284
65P815.....283,305
TV panel type can be found in service menu.....Main menu (1950)...
Click to expand...
Click to collapse
Seems on mine 65P815 by your table, the code should be ST6451D02-3 (code 305), but i have ST6451D02-H (code 283).
I have flashed v272 (img file) from v084 to my 65P815. Flashing went smoothly with no black screen ecountered. v272 works nicely with no problem.
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
@ancifil said:- "Did you reboot your TV after that?"
Sure I had rebooted it after flashing as I have been using this firmware for about a month.
I remembered flashing it 2 times. The first time was not successful (can't remember due to what). The second time reflash (same as what you did as in post #10) was smooth and without any problem.
jngiag, looks like it should, as for me... Maybe, i shall try 272 one more time.
superfly86, did you try 272?
jngiag said:
I remembered flashing it 2 times. The first time was not successful (can't remember due to what). The second time reflash (same as what you did as in post #10) was smooth and without any problem.
Click to expand...
Click to collapse
Btw, one thing. Can you remember, after you had flashed 272 first time and after that launched flash menu, to flash second time, was you able to see menu?
ancifil said:
Btw, one thing. Can you remember, after you had flashed 272 first time and after that launched flash menu, to flash second time, was you able to see menu?
Click to expand...
Click to collapse
I think it was due to a request to input pin while I was trying to setup live TV. I did not know the pin so I powered it off and reflashed as in post #10. Sorry, I can't remember it exactly.
ancifil said:
Seems on mine 65P815 by your table, the code should be ST6451D02-3 (code 283), but i have ST6451D02-H (code 305).
Click to expand...
Click to collapse
Your 65P815 with panel ST6451D02-H...... Project ID MUST be 283.
This is your problem with firmware (black screen ) !
So you need to change ID number from 305 to 283.
To modify the project ID, when TV is ‘ON’, with the remote control do the key sequence
0 6 2 5 9 8 .....MENU.... 283.
At the end of the key sequence the TV must reboots alone if the project ID has been understood by the TV. If it doesn’t, update the product with the last software available and try again.
Sometimes several tries can be necessary for successful project ID modification.
stasiof said:
Your 65P815 with panel ST6451D02-H...... Project ID MUST be 283.
This is your problem with firmware (black screen ) !
Click to expand...
Click to collapse
I've got that. But the hard thing is that i will not see this manipulation... I have to do that blindly. Risky stuff, right?
asking for help accidentally in the programming options, I activated the indicator, the TV turned off and the android logo is still there
I've already won various updare pendrives but after the update is complete, the android logo is still there. Is there any way to get into recovery? to make a short circuit on the motherboard?
MT58 platform......
read here:
Downgrade File for TCL C6 (Current Version: V8-T658T01-LF1V534)
Hey guys, I am new to the Android TV scene so bear with me. Recently bought TCL C6 TV. It updated yesterday to Android Oreo but the Color accuracy especially in HDR has fallen considerably, constant dimming of backlight for no reason and not to...
forum.xda-developers.com
I have read anything that I would not have uploaded, it will not reset the TV settings for me, do you have an idea?
grzechu023 said:
I have read anything that I would not have uploaded, it will not reset the TV settings for me, do you have an idea?
Click to expand...
Click to collapse
You need TV to work back or worry about not to reset TV ?
First try to unplug TV from power socket and after 10-15 min plug back .
If not,you nee to flash PKG file, to boot normal again.
I have already tried and you have nothing on a 100% working pkg file, each I uploaded the TV stops on the android logo after 4 hours the same
So...
I was dumb enough to play with the developer options hoping to find an option to deactivate adaptive screen resolution. instead i clicked on something and now my tv is kinda soft locked. at first it was stuck in a boot loop, eventually went into recovery mode here and there (see attachment, maybe there are some informations that could help solving the problem) , but i couldn't select/press anything bc this tv only has a power button. Later i found out you can use an USB keyboard to select stuff in recovery mode. So i grabbed my keyboard and waited for the RM screen. but it wouldn't show up. idk why but now its booting "normally", even shows the android logo. but then its just black. eventually the TV turns off and then back on, over and over. i tried every button combination I could find on the whole internet. Nothing seemed to work. One combination got me some hope but that hope disappeared quickly: i unplugged the TV, held the powerbutton, plugged the TV back in, still holding the power button, and waited.
after a short time it showed me a monitor looking like symbol with a gear icon on it and the gear was crossed with a red X. under it it was saying "error". (see attachment) ("Fehler" means "error" it's german)
so here i am. idk how i get it back into recovery mode so i can try that keyboard method.
and since i got that TV from my gramps, I don't have much information about it either. just got the TV and the remote from him.
I just know that it's the TCL 43EP640 respectively 43EP640X1. (Theres a sticker on the back of the TV, see attachment) so yea. I've heard you can update the firmware/software using an USB stick but idk how and i couldn't find any firm-/software for this TV
If you've read to this point and have an answer to my problem: I Love you
Need to flash with any IMG software (firmware) file....
Latest.....
Android 9....V662
Android 11...V715
Search in this thread...
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
stasiof said:
Need to flash with any IMG software (firmware) file....
Latest.....
Android 9....V662
Android 11...V715
Search in this thread...
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
Click to expand...
Click to collapse
i truly have no clue how to do any of these. could you help me out? explain to me like I'm 5
prixtn said:
i truly have no clue how to do any of these. could you help me out? explain to me like I'm 5
Click to expand...
Click to collapse
Please, take time and read in forum I posted...thx.
Edit:
Sample for same thread......#3,725
You need to flash IMG file
stasiof said:
Please, take time and read in forum I posted...thx.
Edit:
Sample for same thread......#3,725
You need to flash IMG file
Click to expand...
Click to collapse
but where do i get the firmware files?
prixtn said:
but where do i get the firmware files?
Click to expand...
Click to collapse
In that thread, everything is there.
Use search function....type... V662 or V715 and you will found.