[RECOVERY][UNOFFICIAL] TWRP 3.3.1-7 Magisk Prepatched ONLY FOR (ROOTED S10+EXYNOS) - Samsung Galaxy S10+ ROMs, Kernels, Recoveries, & O

After flashing this there is no need to press that key combo (VOL up key + Power + Bixby) to boot into Magisk mode. Just after flashing this image your S10+ will automatically boot up in the Magisk mode. And that key combo (VOL up key + Power + Bixby) will be used to boot your phone directly into recovery mode.
Download : PrePatched TWRP S10+http://www.mediafire.com/file/uq378oaeb6s80hc/Prepatched_Twrp_S10%2B.zip/file
DISCLAIMER : FLASH AT YOUR OWN RISK AND I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.
IF MY POST IS USEFUL FOR YOU THEN KINDLY PRESS THE THANKS BUTTON
Special Thanks To : All credit goes to @ianmacd For his amazing Work for Twrp and Latest unofficial magisk for S10 family & TWRP Team &
@topjohnwu for his work for Magisk

Installation Instructions for the Rooted Users : Before Installing Kindly Make a Backup Of Your Phone and Internal storage
1. Requires Root : Download The Image File From The Above Download Link. Place It In The Root Of Your /sdcard folder .
2. Run The Following Commands Via Adb Shell
3. After Installation Do Wipe Your Internal storage and Do Not Factory Reset Your Phone Otherwise It Will Cause BOOTLOOP
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
Click to expand...
Click to collapse

S10+ Exynos or Snapdragon ? or work for both ?

for s10 + exynos version

Just 3 things i wanna ask.
1. But you didnt mention twrp version?
2. Even if we already are on twrp' latest version we need to wipe because its prepatched?
3. We shouldnt ever factory reset or just after first installation? But we can factory reset from settings?

1. Latest Twrp 3.3.1-7
2. if you have a twrp installed then kindly do not flash it.
3. Kindly make a backup from twrp recovery before making a factory reset in case any thing goes wrong

Sorry for such a rudimentary question but are the adb commands done individually after "su" or is that one command line too long to fit in the box? Sorry, I've just been fighting with getting twrp on my phone since last night. Root works fine but after flashing patched img file I can never get it to go into twrp. Always goes to stock recovery even though flash is successful. I originally thought I was messing up the key combo but I have my suspicions. Any help would be greatly appreciated. Thanks

jtford said:
Sorry for such a rudimentary question but are the adb commands done individually after "su" or is that one command line too long to fit in the box? Sorry, I've just been fighting with getting twrp on my phone since last night. Root works fine but after flashing patched img file I can never get it to go into twrp. Always goes to stock recovery even though flash is successful. I originally thought I was messing up the key combo but I have my suspicions. Any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
UPDATE××Got TWRP to boot the first time. First time system booted fine but I lost root. Did a fresh root per magisk install guide and reflashed twrp.img in root shell. Got twrp to boot again but it continues to boot loop. I only wiped internal with no factory reset. I know it's probably something I'm doing. Any suggestions?

jtford said:
UPDATE××Got TWRP to boot the first time. First time system booted fine but I lost root. Did a fresh root per magisk install guide and reflashed twrp.img in root shell. Got twrp to boot again but it continues to boot loop. I only wiped internal with no factory reset. I know it's probably something I'm doing. Any suggestions?
Click to expand...
Click to collapse
It seems magisk not installed properly. Download latest firmware from Carotix folder Here it have prepatched recovery prepatched ap you need not to do anything you need to reflash recovery n system ...use odin flash patched ap cp bl and use HOME_CSC (you will not use any data apps or anything) Just flash using odin everything will work fine.
also download multidisabler from ian's multidisabler thread HERE put it in phone as need to flash after boot into Twrp!
instructions copied from Carotix thread
Download 4 files from OTA/ODIN FILES then follow this guide:
and put the last Multidisabler in your phone
1- Turn off the device and put it in download mode with the bixby / vol down button and inserting the cable to the PC at this point open Odin remove the check mark from autoreboot
2- Load the AP .tar file downloaded from OTA together with the BL the CP and the HOME_CSC .... if you put the CSC you lose all the data
3- Start the flash and wait
4- At the end you disconnect the phone from the cable and with the power / vol down keys force the switch off as soon as the screen goes black press vol + / bixby / power to go in recovery and don't leave the keys until you see the twrp screen, continue to keep the 3 keys pressed and wait for the recovery to start again
5- Flash the multidisabler then from the main screen choose recovery reboot to boot rooted/magisk system.

comsite said:
It seems magisk not installed properly. Download latest firmware from Carotix folder Here it have prepatched recovery prepatched ap you need not to do anything you need to reflash recovery n system ...use odin flash patched ap cp bl and use HOME_CSC (you will not use any data apps or anything) Just flash using odin everything will work fine.
also download multidisabler from ian's multidisabler thread HERE put it in phone as need to flash after boot into Twrp!
instructions copied from Carotix thread
Download 4 files from OTA/ODIN FILES then follow this guide:
and put the last Multidisabler in your phone
1- Turn off the device and put it in download mode with the bixby / vol down button and inserting the cable to the PC at this point open Odin remove the check mark from autoreboot
2- Load the AP .tar file downloaded from OTA together with the BL the CP and the HOME_CSC .... if you put the CSC you lose all the data
3- Start the flash and wait
4- At the end you disconnect the phone from the cable and with the power / vol down keys force the switch off as soon as the screen goes black press vol + / bixby / power to go in recovery and don't leave the keys until you see the twrp screen, continue to keep the 3 keys pressed and wait for the recovery to start again
5- Flash the multidisabler then from the main screen choose recovery reboot to boot rooted/magisk system.
Click to expand...
Click to collapse
Thanks for your help. I had to do it a little unconventional to get it working. None of the prepatched recoveries that are included in all these firmware downloads would work for me using Odin. Only flashing this twrp.img in a root shell would work. I finally just flashed Beyond rom zip after getting into twrp along with the disabler zip. Boots into rooted system with no problems and I can boot into twrp with no problems as well. Oh yea, I flashed Beyond over ASG8 also. Not sure why I could never get ASH6 to work.

[RECOVERY] TWRP 3.3.1 Changelog
v3.3.1-9_ianmacd for G97[035]F [inc. ASH6 kernel (which also works with ASH1 firmware)] (2019-09-17)
Restore working MTP functionality to TWRP. With thanks to bigbiff for the reference and to Geiti for his commit embodying the same fix.
v3.3.1-8_ianmacd for G97[035]F [inc. ASH6 kernel (which also works with ASH1 firmware)] (2019-09-06)
Kernel rebased on Samsung's ASH6 source code.
[System-as-root] MultidisablerChange log
v1.6 (2019-09-18)
Add support for more variants of A50: A505([YG]N|G).
Fix A205G detection.

Hello kkrraazzyy,
can you please explain how to install your twrp.
I already habe twrp installed. an this rom. --> https://forum.xda-developers.com/s10-plus/development/rom-carhdrom-1-t3938987
But a want to install your twrp to boot always with Magisk without to press any key.
I need your help please.

Any proper YouTube guide video for these things, as flashing/rooting became so complicated with so many steps.... Thank you!

So from my understanding this is the first and only way to have the phno boot into the patched recovery automatically without needing top physically press the button combo? Or have I missed something Was just expecting there to have been a lot more attention that's all.
This has actually what has been one of the main reasons holding me back from rooting as it reminds me back in the day of tethered and untethered jailbreaks for iPhones.
Except that this is just a inconvenience while tethered would make the phone practically unusable.

Is there an app i can use to backup and restore my kik chats? I got a new phone, a Samsung Galaxy 10+ and want to tramsfer my kik chats and save data for Digimon Heroes! to my new galaxy 10+ i dont have root on either phones is there a app (apk) or one i can downlod on my laptop to make the backup of them so i can bring them over. Please i only have a dew days left to transfer my number over and have my old phone shut dwn by my previous provider. I need to do it on the next 2 days.

qaz015393 said:
Is there an app i can use to backup and restore my kik chats? I got a new phone, a Samsung Galaxy 10+ and want to tramsfer my kik chats and save data for Digimon Heroes! to my new galaxy 10+ i dont have root on either phones is there a app (apk) or one i can downlod on my laptop to make the backup of them so i can bring them over. Please i only have a dew days left to transfer my number over and have my old phone shut dwn by my previous provider. I need to do it on the next 2 days.
Click to expand...
Click to collapse
Use Smart Switch by Samsung, it includes the possibility of transferring all your data and settings using a USB cable. I transferred everything from my old phone to this one (S10+ SM-G975F). I don't know if it will work on non-Samsung devices, but it's worth a try.

I have android 10 on my s10+, will this twrp work with android q?

possible to boot without root permissions too?

:good:

Hi @kkrraazzyy , could you show us how you did it?
because @ianmacd https://forum.xda-developers.com/ga...covery-twrp-3-3-0-galaxy-s10-exynos-t3924856/
latest version does not seem to provide this awesome function.

Related

[Rom][ALL_CARRIERS_G930_CRF1][Stock_Oreo_Hybrid][Safestrap_Preinstalled]

This is for All Carriers.
You Do Not Need To Be Rooted To Install This Rom
You Must Be On Stock CRF1 Oreo Firmware Before Starting
This Takes Some Patience To Install​
What Is Safestrap
Safestrap is a Bootstrap / Recovery for locked bootloader phones. Safestrap is now based on TWRP Recovery (a touch based recovery) and you can perform .zip installs, backups and restores here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads
ODIN_ADB_G930_CRF1_ALL_CARRIERS_V3.zip
Google Drive Mirror
Odin Files
G930TUVU4CRF1_G930TTMB4CRF1_TMB.zip
Google Drive Mirror
Feature:
SafeStrap Recovery PreLoaded
Official Oreo
Safetynet Passes
Samsung Pay,Pass,Secure Folder Working
Samsung Cloud Enabled
Places Tab Enabled
Spam Caller Id Enabled
Call Recording Enabled
Native Status Bar Speed Meter Enabled
Custom Boot Animation
Helpful Key Combos
Recovery Mode
Home+ Volume Up + Power @ Same time
Download Mode
Home + Volume Down + Power @ Same time
Safe Mode
Phone Powered Off
Press and hold the Power key past the model name screen.
When “SAMSUNG” appears on the screen, release the Power key.
Immediately after releasing the Power key, press and hold the Volume down key.
Force Reboot
Press and hold the Power + Volume Down buttons for approximately 10
Pre Install/Install Instructions
1. Donwload and unzip ODIN_ADB_G930_CRF1_ALL_CARRIERS.zip. If not on CRF1 Oreo firmware download and unzip G930TUVU4CRF1_G930TTMB4CRF1_TMB.zip
2. Use the odin thats located in the ODIN_ADB_G935_CR**_ALL_CARRIERS folder in the Odin_Firmware folder
3. In Odin select the AP, BL, CP and CSC files from the G930TUVU4CRF1_G930TTMB4CRF1_TMB and put them in the corresponding Odin slots In the Pit file tab in odin select the HERO2QLTE_USA_VZW.pit no matter what carrier you are.
4. Select start in odin. You will loose your data and files on internal storage
5. You do not need to go through setup of stock firmware as you are wiping again. So as soon as odin is done flashing and phone reboots and finishes recovery install
and reboots you can immediately reboot too download mode and continue too install instructions 1
Install Instructions
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
4. As soon as phone powers off hold buttons to reboot to recovery
5. Once in recovery run xxx_FlashSystem.cmd
6. Phone will reboot to download mode
7. In BL slot in odin flash BL_G935_CRF1_DELETE_CACHE.tar
8. Phone will automatically reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will automatically reboot to recovery
14. Once in recovery you will see a bunch of red lines saying failed to mount cache. Scroll down and select wipe cache then reboot too bootloader
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot but it will not automatically reboot to recovery you must do this manually. As soon as phone powers off hold buttons to reboot to recovery
18. When in recovery you will get the no command error then after a few you will get recovery options at this point wipe data and reboot to setup phone
19. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
To Enter And Exit Safestrap
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ODIN_ENTER_SAFESTRAP_G93*.tar
4. Let Phone reboot and enter safestrap
5. Too leave safestrap click reboot phone and hold buttons to reboot to download mode
7. In BL slot in odin flash BL_G935_CRF1_DELETE_CACHE.tar
8. Phone will automatically reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will automatically reboot to recovery
14. Once in recovery you will see a bunch of red lines saying failed to mount cache. Scroll down and select wipe cache then reboot too bootloader
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot but it will not automatically reboot to recovery you must do this manually. As soon as phone powers off hold buttons to reboot to recovery
18. When in recovery you will get the no command error then after a few you will get recovery options at this point wipe cache and reboot
19. After leaving recovery. If you have white boot animation all went well.
20. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
Old Downloads
ODIN_ADB_G930_CRE4.zip
Odin Files
G930AUCU4CRE4_Oreo.zip
Old Pre Install/Install Instructions
1. If not on CRE5 Oreo firmware download and unzip G93*VVRU4CRE5_8.0_4File_USA (Verizon).7z Unzip ODIN_ADB_G93*_CR**.zip
2. Use the odin thats located in the ODIN_ADB_G93*_CR** folder in the Odin_Firmware folder
3. In Odin select the AP, BL, CP and CSC files from the G93*VVRU4CRE5_8.0_4File_USA (Verizon) and put them in the corresponding Odin slots
4. You will loose your data and files on internal storage
5. You do not need to go through setup of stock firmware as you are wiping again. So as soon as odin is done flashing and phone reboots and finishes recovery install
and reboots you can immediately reboot too download mode and continue too install instructions 1
Old Install Instructions
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
4. As soon as phone powers off hold buttons to reboot to recovery
5. Once in recovery run xxx_FlashSystem.cmd
6. Phone will reboot to download mode
7. In BL slot in odin flash BL_G93*_CR**.tar
8. As soon as phone powers off hold buttons to reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
14. Once in recovery if this is your first time installing you must run xx_AddCache WipeData.cmd. If your reinstalling and want to keep data run xx_AddCacheWipeCache.cmd
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
18. When recovery is done phone will reboot. If you have white boot animation all went well.
19. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
To Enter And Exit Safestrap
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ODIN_ENTER_SAFESTRAP_G93*.tar
4. Let Phone reboot and enter safestrap
5. Too leave safestrap click reboot phone and hold buttons to reboot to recovery mode
6. Once in recovery run x_DeleteCache.cmd
7. Phone will reboot to download mode
8. In BL slot in odin flash BL_G93*_CR**.tar
9. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
10. Let recovery bootloop at least once
11. Hold buttons to reboot to download
12. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
15. Once in recovery run xx_AddCacheWipeCache.cmd
16. Phone will reboot to download mode
17. In BL slot in odin flash BL_G93*_CR**.tar
18. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
19. When recovery is done phone will reboot. If you have white boot animation all went well.
20. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
Bugs:
DO NOT USE ENCRYPTION
Safestrap is still beta so there are some bugs
All reboot options in safestrap only reboot the phone.
Safestrap rom slots do not work dont mess with
Credits:
- @Raymonf for modified odin
- @afaneh92 for safestrap Main Thread Here Consider a donation to him he worked along time on this Donation Link
- @me2151 for finding this method
- @tytydraco for some instructions
- @mweinbach for some instructions
- @Craz Basics for xposed on non rooted
- @partcyborg for finding the root method!
- @elliwigy for being great help and original S8 root
- @rayan-refoua for boot animation
- @FatalONEM8 - For posting Oreo OTA
- @stang5litre
- @jds3118
- @Krog18
- @klabit87 for S7 Safestrap
echoe rom and noname rom
stang5litre Test Group
Click to expand...
Click to collapse
SafeStrap Flashable Zips​
Remove FRP Protection Safestrap Flashable Zip
SS_Remove_FRP_S7.zip
Directions For FRP
So if your stuck and dont know google account info Do the samfail process when all done flash file to enter safestrap once in safestrap mount and unmount system then flash SS_Remove_FRP zip then follow direction to leave safestrap. After your phone reboots from recovery the last time force phone back to recovery wait until options come up and wipe data and you can now enter new google account in setup or skip
Google Pixel Style With Samsung Apps Replaced With Google Apps
Google_Style_With_Build_prop_Tweaks_V4.zip (Slightly Debloated)
Data Wipe is recommended to get full effect
If you flash one of the google mods make sure to set default dialer in settings/apps to google dialer
If Gboard dont show update the app in playstore or apk mirror then in playstore uninstall the update then it will work
Extreme Aroma based debloater for S8/S7/S9 devices by OrelMadK
https://forum.xda-developers.com/galaxy-s8/themes/4-2-18-extreme-aroma-based-debloater-s8-t3744608
This aroma debloater probably one of the best I have seen by @orelta
The above zips cannot be undone If you want to go back to stock you would need to do the Install process over but you shouldnt need to wipe data this time
Xposed Framework Installer zip
xposed-v90-sdk26-arm64-beta3.zip Flash In safestrap
Xposed Installer APK
XposedInstaller_3.1.5.apk Install as normal apk then open app make sure framework is installed (the box will be yellow) then reboot open and box will be green showing its working
Recommended Xposed Modules
Xtended-Settings.3.1.7.apk
GravityBox-O.8.2.0.apk
Firefds-Kit-Oreo.0.1.0.0.apk
Xposed Uninstaller zip
xposed-uninstaller-20180117-arm64.zip
Dual Speaker Mod
Dual+Speaker_Oreo-8.0-Compatible.zip Flash In safestrap
Dual+Speaker_Return_TO_Stock.zip
Rom Control-Access To Some Hidden Settings
RomControl.apk
Host AdBlocking
Host_AddBlocking.zip
Remove_Host_AddBlocking.zip
Credits
- @rovo89 for xposed Main xposed thread
- @IDan1109 base of debloat script
- @EmperorEye for some build.prop tweaks script
Links live
Hello, looks like missed step in the "To Enter And Exit Safestrap" part of instruction. We need to enter recovery between 17 and 18 to wipe cache.
abyss7 said:
Hello, looks like missed step in the "To Enter And Exit Safestrap" part of instruction. We need to enter recovery between 17 and 18 to wipe cache.
Click to expand...
Click to collapse
Yes I will fix that sorry
Thanks for your work.
Could you briefly explain:
- what if I do not need Safestrap, can I just replace step 5 of installation instruction on my own modification? or there is something significant in xxx_FlashSystem.cmd ?
- Is adspso.bin really necessary in BL_G930_CRE4.tar? It is component of modem. I'm using modem from Verizon and I will have to reflash it every time I'm flasing BL_G930_CRE4.tar
abyss7 said:
Thanks for your work.
Could you briefly explain:
- what if I do not need Safestrap, can I just replace step 5 of installation instruction on my own modification? or there is something significant in xxx_FlashSystem.cmd ?
- Is adspso.bin really necessary in BL_G930_CRE4.tar? It is component of modem. I'm using modem from Verizon and I will have to reflash it every time I'm flasing BL_G930_CRE4.tar
Click to expand...
Click to collapse
Why are you using verizon modems on att firmware rom. The only thing that accomplishes is making none of your samsung stuff work like pay, pass , etc
jrkruse said:
Why are you using verizon modems on att firmware rom. The only thing that accomplishes is making none of your samsung stuff work like pay, pass , etc
Click to expand...
Click to collapse
Yes, I want to use that samsung stuff, but carrier aggregation does not work with ATT modem. And what about my questions?
abyss7 said:
Yes, I want to use that samsung stuff, but carrier aggregation does not work with ATT modem. And what about my questions?
Click to expand...
Click to collapse
Safestrap is custom twrp recovery. If you feel you can change scripts and get stuff how you want too, go for it. That's how new ideas are created
jrkruse said:
Safestrap is custom twrp recovery. If you feel you can change scripts and get stuff how you want too, go for it. That's how new ideas are created
Click to expand...
Click to collapse
Before you posted this thread, I tried to do the same inspired your Verizon thread, but with no luck. Just could not make recovery bootloop, got only dm-verity failed.
I understand, you've made the great work, and I appreciate it. Could you please share small piece of your knowledge, what causing this bootloop that delete dm-verity key? deletecache.img?
abyss7 said:
Before you posted this thread, I tried to do the same inspired your Verizon thread, but with no luck. Just could not make recovery bootloop, got only dm-verity failed.
I understand, you've made the great work, and I appreciate it. Could you please share small piece of your knowledge, what causing this bootloop that delete dm-verity key? deletecache.img?
Click to expand...
Click to collapse
If you want to add files stick them in the system folder if you want to delete stuff mod the sys.cmds file all the .cmd files with x in front of name dont change
If I do not need safestrap I can safely remove ./system/etc/safestrap/ folder, right?
abyss7 said:
If I do not need safestrap I can safely remove ./system/etc/safestrap/ folder, right?
Click to expand...
Click to collapse
No
Edit_Actually you could and also remove bin folder and the vendor folder from the system folder. Then in sys.cmds remove the permissions ro safestrap and the fstab.qcom e2fsck files
Just flashed this working great no lags noticed thank you. Just wondering what I should try to flash with safestrap. I'd love to figure out how to have native outdoor mode.
Just added some zips that can be flashed in safestrap on post 2
SamGuy2020 said:
Just flashed this working great no lags noticed thank you. Just wondering what I should try to flash with safestrap. I'd love to figure out how to have native outdoor mode.
Click to expand...
Click to collapse
Post # 2 RomControl app is what your looking for
Hello,
I'm not sure if I'm understanding your enter/Exit Safestrap instructions correctly but it reads like we have to flash a file in odin everytime we'd like to boot to recovery to use safestrap?
Thank you for your further development of the LOCKED! SG930A variant. I just came back to android after doing a nickel with the iphone. It was like prison.
So does this mean we have root for oreo? Eng_booloader ?
Xposed?
Anyone trying magisk ?
---------- Post added at 02:17 AM ---------- Previous post was at 02:07 AM ----------
https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454
miko12312 said:
So does this mean we have root for oreo? Eng_booloader ?
Xposed?
Anyone trying magisk ?
---------- Post added at 02:17 AM ---------- Previous post was at 02:07 AM ----------
https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454
Click to expand...
Click to collapse
Magisk doesn't work with the S7 USA version
Rick1488 said:
Magisk doesn't work with the S7 USA version
Click to expand...
Click to collapse
I know that so far , since were messing with a whole new OS, but like the safestrap that has been injected into the rom, there is some other ways of using magisk like the one I have posted yes it does still check booloader but if we can bypass that or use magisk on a different partition we may find a way as su system install is not really supported anymore it's all now systemly ,but reading the forum there is some kind of root as it's possible to use xposed

How to Root Your Samsung Galaxy A10 + Install Twrp

READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?
Oh. Alright thanks for telling me.
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.
Can you upload it to Mediafire? Mega marks a "temporal error"...
Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?
Works on a105m?
Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes
i receive message that i running samsumg not official firmware after odin install recovery.tar
not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.
BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message
have you fixed the storage reduced to 16gb problem?
I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?

[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)

[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
stylemonument said:
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
Click to expand...
Click to collapse
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Please see here: Bootloader Unlock Service For US Variants
BoiBundy said:
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Click to expand...
Click to collapse
Okay.... let me do that. Thanks.
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Msgd re: oem unlock! Btw, if we got any awesome Sam sec experts out there who wouldn’t mind entertaining some qs from me regarding a lot of WEIRD stuff happening w my phone, be eternally grateful. Could even work out a monetary deal for your time, and (perhaps) help!
Thanks much in adv, msg on telegram as @nemotheDreamer.
butchieboy said:
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
You might be right, I will edit it tonight
So we can legit root the Snapdragon version now?
Nickdroid86 said:
So we can legit root the Snapdragon version now?
Click to expand...
Click to collapse
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
cerj said:
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
Click to expand...
Click to collapse
Thanks man, wanted to have a central "fool-proof" way for people to enjoy the freedom of root
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
MonkeyJug said:
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
Click to expand...
Click to collapse
Check Here: https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/
I've been on Nexus and Pixel devices so long now I cannot remember much about modification on Samsung devices. Last one I had rooted was the Note 2. Anyway, bootloader unlocked and successfully rooted my SM-N975U (Note 10+). Now there are updates available so I am sorry if this isn't the place or if a dumb question, but is there any special way I need to do updates on the snapdragon so I don't relock the bootloader or lose root? With Pixel, ADB sideload was easy, not sure with this one.
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
nabnab25658 said:
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
Click to expand...
Click to collapse
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Dick_Stickitinski said:
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Click to expand...
Click to collapse
Hey, just wanted to thank you for pointing me in the right direction. I've had my Sm-976V BL unlocked and rooted for a bit now, but have been busy hence the late reply.
I have an issue. I boot into TWRP just fine but all my files in sdcard are nothing but random numbers and letters
I think this happens when you don't wipe your data. You also need to flash a decryption file. It happened to me at first because I didn't wipe all data.[/QUOTE]
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
which TWRP version to flash and which odin? hope i can get answer i had N975U1 unlocked bootloader
Anyone else getting that pesky "Android 11 Update" since they have rooted? I keep postponing it. I'm guessing it will fail if I try to install. Not sure what I should do.
Sammobile don't seem to have the firmware available yet. I was thinking installing it with odin then patching AP with Magisk
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
it works on my N975U1 android 10 Q version 1st method so no need 2nd method

TWRP & Root Samsung Galaxy A51 SM-A515F One UI 2.5 CTJ1 Android 10

Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Video Link:
Credit:
1. @ianmacd
2. @redymedan
Mohd Masab said:
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Credit:
1. [email protected]
2. Recovery-Mode
Click to expand...
Click to collapse
Keep up to making the next tutorial on Galaxy A51
Hello
Mohd Masab
It's my first Samsung .I had 4-5 Sony ,easy to root ,a Doogee S90 (NEVER BUY THAT !).
Is your method safe ,have U seen bad effects ,what fonctions did U lost ?
Bye .
Fred
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
hargitomi said:
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
Click to expand...
Click to collapse
I did what you said but still encrypts after reboot. Latest Magisk.
Hi, I am having problems with internal storage, I can not create folders and there are applications that I can not download, any solution?
Could someone tell me if it is compatible with the November update CTK1?
I have managed to root the phone, you can install everything and configure it, but after turning off the phone, I can't start it does bootloop, and it returns to the prompt "The phone is not running Smasung official software ..." never finishes starting? What do you recommend me to do?
020221
I reloaded the original rom and did the procedure again, taking into account the clarification of installing install dm_verity and Magisk after each other, without a reboot, and everything went well!
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
It worked for me but i can't access themes and other system apps
Is there any solution to access themes on rooted a51
Everything working well for me, thanks !
For ameer419 ,maybe try to flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip after EACH other thing U flash in TWRP ...
Good luck !
Hello everybody !
Bootloop til this morning ,maybe my fault :I erased system apps such as Facebook ,Youtube ...nothing very important .
I tried to start the procedure at the begining ,it doesn't work ...
Any idea from anyone ?
Thanks .
fleafred said:
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
Click to expand...
Click to collapse
How are you fleafred, https://samfrew.com/es/model/SM-A515F/ here you will find the original rom. I did the procedure again and had no more problems.
Cool ,I couldn't find it!
Just have to wait for 9h now ...
Thanks a lot ,abraxasboot ,I'll tell u.
Have a nice day .
It worked !
Ouf !Thanks a lot ...
I could re-install Magisk ,Xposed ...
I'd have like to know what I desinstalled to do that ...
Have a nice day .
Thank you very much, brother. You did the perfect way
== important ==
I was unable to flash and reboot into TWRP recovery after applying the official Samsung update from March, which updates Android from 10 to 11. Reboot into recovery would not work and I would always end in a boot loop.
I had to downgrade to Samsung's official Android 10 and used the binaries from January for that: https://samfrew.com/es/model/SM-A515F
After that, flashed TWRP again and was able to boot into recovery right away as it should be
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
hey guys i used a lyf wind 1 to flash lineage os using twrp ..... so i wiped the previous os and unknowingly flashed another unsupported version of twrp ...when entering to recovery menu its all blank .... now i have no os and recovery ...... i couldnt flash stock rom because my device is not recognised as qualcomm port .............
pls any help ????
I have a working 11R twrp and all the DRM passers mejestics etc. to run.. you can boot the os after that that is the standard Samsung OS. np u can install LINAGE os 18.1 Andys march release, the Mejestics meaning u can patch root without Needing to part the orignal Firm and copy boot.img over. etc
Here is Link With GSI as Well and 2.5 GUI Twrp working and UI3.0
Google Drive: Sign-in
antuanix46 said:
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
Click to expand...
Click to collapse
All good in the end, I needed to install samsung's firmware in odin first
Thank you for the good work

[GUIDE][A107M] BL Unlock, Twrp, ROMs and Magisk

I am not responsible for any damage to your device, when you root you lose the Warranty
This guide collects A107F development info, but with the files ported to the A107M.
Thanks to the Galaxy A10s Development team for the original files.
You need to be on Android 10, if you are on android 11, there are tutorials to downgrade.
[BootLoader Unlock]
- Backup all your media, this process will delete your internal media including music and photos
- Go to developer settings and enable [OEM Unlock]
- Reboot to download mode (Turn off, press VOL- & VOL+ and connect the USB)
- When prompted, press and hold VOL + to enter bootloader unlock mode
- Press VOL + to confirm you want to unlock bootloader, this will wipe your data
- If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
- Go through the initial setup. Skip through all the steps since data will be wiped again later when we flash TWRP and magisk
- Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader. This step is MANDATORY
- Perfect! Your bootloader now accepts unofficial images in download mode.
[Twrp Install]
At this point, you will need to install Odin on your PC.
Bootloader unlocked is OBLIGATORY.
On your MicroSD, put the "A10s-encryption-disabler.zip" file.
Boot to download mode, load "VBMeta" file in AP and "TWRP Ported to A107M" file in BL
- Disable [Auto Reboot] in Odin
- Flash
- Force a reboot by pressing VOL+, VOL - and POWER buttons at the same time
- With the USB connected, and after the screen goes black, IMMEDIATELY let go of all buttons and IMMEDIATELY press and hold VOL+ and POWER button at the same time to boot to TWRP Recovery
NOTE: TWRP on this phone is not perfect, after booting to it, the screen will remain black after the Samsung logo disappears, simply wait 10 seconds and press the power button 2 times to have acces to it.
- After booting to TWRP successfully, go to WIPE in TWRP
- At the bottom, you should see an option to FORMAT DATA. After you select it, you will be asked to type "yes" in your keyboard. If you do not see this, you probably selected the wrong option.
- After formatting data, flash the "A10s-encryption-disabler.zip" with TWRP. This is done to avoid future bootloops.
- Optional, flash "Magisk.zip" if you want to keep on Stock ROM with root.
- After doing this, boot back to system and you are done
- Wait patiently for the device to boot for the first time
[Custom ROMs Install]
Bootloader unlocked and TWRP isntalled are OBLIGATORY.
Most of the GSI ROMs of this forum works fine on this device.
Only download a64 ROMs, do not confuse with ARM64.
On your MicroSD, put the ROM image.
- Boot to TWRP
- Go to Wipe > Advanced
- Wipe ONLY the System partition
- Go to Install
- At the bottom, select option "Install Image"
- Search for your GSI. It should be something that ends in .img. If it ends in .xz instead, you need to extract the image first
- Optional, if you want Root, flash the "Magisk.zip" file
- Go to recovery main menu
- Go to Reboot
- Reboot to Recovery
- After that, go to Wipe and perform a Factory Reset
- Reboot to System and enjoy!
[Downloads]
>Everything you will need<
I had a problem in Odin an "RQT-CLOSE" error occurred
Lukas203 said:
I had a problem in Odin an "RQT-CLOSE" error occurred
Click to expand...
Click to collapse
I GOT THE SAME THING WHATS HAPPENNING?
Worked perfectly on a107m with binary 6
Alexander_SlowD said:
Worked perfectly on a107m with binary 6
Click to expand...
Click to collapse
If it worked for you, what procedure did you follow? What rom did you use for bit 6? what tools did you use?
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Luciannus said:
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Click to expand...
Click to collapse
The TWRP is slready working for me , now I trying the Magisk part , I did this on Android 11 binary 6 trough A107MUBS6CWA3_ZTO firmware ...

Categories

Resources