As so many others have pointed out, it is pretty hard to get any custom GSI ROMs running on the Mi 8 Pro / Explorer Edition (Equuleus). I was also absolutely oblivious to the fact that the Mi 8 Pro would require different ROMs than the Mi 8 when I bought my handset as I always check if there are custom ROMs available before I buy a new phone and there are some for the Mi 8. As far as I can tell there are no custom ROMs specifically adapted to run on our phones, but luckily enough, it is GSI-compatible or "treble-enabled". So as sad as it is that there are no real custom ROMs you can install, there is a major upside to our situation - theoretically any GSI ROM might run on it, which offers far more options than are available for the phones I have been using before I got my Mi 8 Pro. The big question is: How on earth do you get them to run on the Mi 8 Pro? If this is as puzzling for you as it was for me at first, you have come to the right place - After days and days of trial and error and growing despair, I have found a way to get both Oreo and Pie ROMs to boot and function up to a level that I'm comfortable working with and as this site has helped me so much over the years, I thought I could at least share my findings, hoping that others would be able to benefit a bit as well.
Having said that, I'll start with a list of features that won't work, so if you need them, feel free to move on (or maybe even help me find a way to get them working?). I would love for other forum members to help us expand and refine this guide (especially when it comes to the list of working ROMs) as I plan to keep this thread updated for some time.
A big shout-out goes to nealed , whose post on GSI ROMs got me started and who was OK with me laying out my information in a separate post. :good:
Not working (as of now):
In-Screen fingerprint sensor
IR face unlock ("normal" face unlock works fine)
VoLTE
Many stock Xiaomi / Mi apps won't work - you will have to find modded apks if you want to use Xiaomi's stock apps (such as the Compass app, which I rather liked but haven't found a working version for yet)
Fixed in newer Pie ROMs:
Note that Pie GSI ROMs based on earlier Phh-Treble Vanilla (AOSP 9.0) versions come with a weird ambient display bug (at least on our device). If you decide to have your ambient display set to "always on" it will flicker on and off all the time (which is why I have disabled it, it's driving me crazy when the phone is just lying on my desk and constantly stealing my attention - what does work though are the options "New notifications" / "Show when charging", so that's what I ended up with.)
Another problem with Pie ROMs I ran into was that the Android phone service would simply crash whenever I tried to manually select my network provider. I could see all available cell phone companies in my area but as soon as I would try to switch to a different provider than the one automatically chosen, the Android phone service would immediately crash.]
If none of this is an issue for you, you can expect a smooth and stable Android on our extremely powerful handset. You will be working with a ROM that can be highly customized and will also probably refrain from sending all your data to Xiaomi (which is one of the major reasons I wanted to have a rooted custom ROM and decided to accept that that also means I can't have all the features the phone normally offers - such as the very flashy fingerprint sensor).
Step-by-step instructions on how to install a custom GSI ROM
As a matter of fact, you should be aware that all data that is currently stored on your phone is lost when following this guide, so make sure you have a backup and don't ask me what you can do if you didn't create one! (short answer: nothing)
This guide also assumes you have already waited long enough and successfully unlocked your bootloader using a working Mi Account. If not, have a look here.
Step 1: Flashing an official ROM
Flashing tool - MiFlash
The easiest way to flash an official ROM that doesn't come with loads of system hogs or other "features" you don't want to have, is using MiFlash 2017.4.25.
Official ROM
Next, you will need to download a flashable global MIUI ROM. A list of all available ROMS can be found here.
Depending on which Android version you are going to install later, you want to download
Android 8.1 / Oreo: V10.0.1.0.OECMIFH (fastboot link / .tgz-file)
Android 9.0 / Pie: Try this more recent version first: V11.0.5.0.PECMIXM (fastboot link / .tgz-file). Note, however, that most of the ROMs in the GSI list have been installed on top of V10.2.2.0.PECMIXM (fastboot link / .tgz-file), so give that a try if V11.0.5.0.PECMIXM isn't working out for you.
Android 10.0 / Q: So far, we haven't been able to get any Android Q GSI ROM running on the MI 8 Pro, but there is an official MIUI Android 10 ROM available if you want a stock Android Q device:V11.0.3.0.QECMIXM (fastboot link / .tgz-file). Any ideas on how to get Android 10 GSI ROMs running on the Mi 8 Pro are much appreciated.
Once you have downloaded your ROM, extract it into a directory - I found that MiFlash was having some troubles working with directories whose directory names contained spaces, so I'd recommend simply extracting everything that is contained in the .zip-file into a directory such as "C:\flash", this way I had no trouble flashing any ROMs.
When that is done, you can start MiFlash and select the directory that contains your ROM files.
The next step is important if you want to make sure your bootloader stays unlocked (which you do): you need to select "clean all" at the bottom right of MiFlash so that flash_all.bat is selected. The default option is "clean all and lock" which is not what we want.
Should you have forgotten to change the option you simply have to unlock the phone again afterwards but as that requires a connection to the Xiaomi servers and a Mi Account that lets you do so, it's anything but ideal.
To make your phone talk to MiFlash, put your powered-off phone into bootloader mode by simultaneously pressing the power button and the volume down button and connecting it to your PC via a USB-C cable (preferably the one that came with the phone, but others should work too).
You're good to go - click on "flash" in the MiTool and watch it do its magic. It will take some time - just be patient - after 5 - 10 minutes the phone should automatically boot into MIUI and you're one step closer to installing the ROM you actually want to have on your phone.
Step 2: Installing TWRP recovery
Finding a working TWRP recovery for our phone (ideally in English) is like trying to find a miniature-size needle broken into three parts in a giant haystack. Unfortunately, our phone isn't officially supported by TWRP (yet?) so you won't find anything on their website.
What can be found, is a mixed bag, but after many many attempts of locating a proper source for TWRP image files, I finally came across this forum post.
To cut a long story short, for Android Oreo (Android 8) and Android Pie (Android 9) you want to download
TWRP 3.3.1-0607 (Firedance Edition)
as it is one of the very few versions for our device that are actually able to decrypt your data once you have set a PIN in your Android system. There seems to be a bug with some current TWRP versions that keep you from accessing your data once you have set a screen-lock PIN in your system (which is a requirement to use such features as face unlock).
So if you use a version that can't decrypt your phone (even when entering the correct PIN to enter TWRP) and you encounter a bootloop, you're out of luck: You can't access your system either from recovery or from within the system (If you have come across this post because you're in exactly this situation, you should be able to solve the problem by flashing TWRP 3.3.1-0607 on your phone to regain access).
For Android Q (Android 10) / MIUI 11, this version seems to be working:
TWRP-3.3.2B-0301 (Chinese Version)
Once you have downloaded the .img-file, the best thing is to put it into a directory that already has adb.exe and fastboot.exe in it. If you don't have such a directory, you can very easily create it by downloading and installing Minimal ADB and Fastboot.
Choose any install location you like, you will have to place your TWRP image file in your install location folder afterwards.
To prepare your phone, power it off and then put your powered-off phone into bootloader mode by simultaneously pressing the power button and the volume down button and connecting it to your PC via a USB-C cable.
Next, either start Minimal ADB and Fastboot or manually open a command prompt (cmd.exe) in the directory you have just created and enter the following two commands:
Code:
fastboot flash recovery equuleus-331-607.img
Code:
fastboot boot equuleus-331-607.img
Note that sometimes after flashing TWRP, the phone will boot into recovery twice - don't worry if you only see the TWRP screen and your phone starts rebooting straight afterwards. This is only an issue on first boot.
Congrats, you have now installed a working version of TWRP for the Mi 8 Pro. You can now also manually boot into TWRP by simultaneously pressing the power button and the volume up button on your powered-off phone.
Step 3: Installing a custom GSI ROM of your choice
Once you have a working TWRP recovery, you can install any GSI ROM that might run on our device (scroll down to my second post on this page for a list of working ROMs or click here to jump to it instead) - Prerequisite: Your ROM needs to be an ARM64 / A-Only ROM as this is the only kind of ROM our device can run.
Here's how to go about it:
Boot into TWRP, connect your phone to your PC via USB and transfer the ROM img.-file you want to install
Wipe > Factory Reset
Wipe > Advanced Wipe > System (This will prompt TWRP to ask you later if you really want to reboot - "No OS Installed! Are you sure you wish to reboot?" - which you can simply ignore, TWRP doesn't recognize that a new OS is installed after a system wipe)
Install > Install Image, select your chosen image, choose "System Image" as target partition and swipe right.
If you just want to test the image and not use any Google functionality, you can reboot now (Ignore "No OS installed") - However, this will mean that on most ROMs that don't already come with Google Apps included you won't have any Google functionality (i.e. no face unlock, no Play Store, ...) and you won't get it either if you try to install it after having already booted into your new system - so you probably want to move on to Step 4 before you reboot (unless your ROM already comes with Google Apps).
Step 4: Flashing Google Apps / Enabling Google functionality (Optional)
I'm assuming that since you're reading a guide on installing custom ROMs on an Android smartphone that it will be absolutely no news to you that instantly after installing a custom ROM and BEFORE booting into it for the first time you HAVE to install the Google functionality you want to have as there is no way of adding it afterwards. You simply have to do it right after flashing your ROM.
To flash Google Apps, you have to download them first on https://opengapps.org/.
Select the ARM64 option for the Android version you have just installed (either 9.0 (Pie) or 8.1 (Oreo)) and choose the package that best suits your need. I always go for the "Nano" package as it includes everything you can't install by yourself from the Play Store later on. This means you can also uninstall any Google App that isn't included in this package if you don't need it any longer. The bigger packages come with many more apps but if you install them now before you boot into your OS for the first time, they get turned into system apps and can't be easily uninstalled later.
Once you have downloaded the Google Apps package of your choice, you can transfer it to your phone via Windows Explorer if it's still connected via USB and in TWRP (which it should be in anyway ). Now just go to Install, select the .zip-file you have just transferred to your phone and swipe right.
Problems you might run into when installing your Google Apps:
This message or similar messages might appear in TWRP when you try to install your Google Apps package, even though you are using the correct version for your ROM (Pie ROM and Pie Google Apps, for example):
This Gapps pkg is for Android 9.0.x ONLY
Please download the correct version for your ROM: 8.1.0 (SDK 27)
Click to expand...
Click to collapse
If this happens, go to the Reboot Menu in TWRP and select Recovery to reboot into TWRP. Once you've done that, Google Apps should install without problems and recognize that you do indeed have the right Android version installed.
Many times, the System partition will also be too small to also accommodate the Google Apps package, so you will be greeted with the following message:
Insufficient storage space available in System partition.
Click to expand...
Click to collapse
If this happens to you, here's the fix:
Go back to the main menu in TWRP
Wipe > Advanced Wipe
Select System
Tap on Repair or Change File System
Tap on Resize File System
Swipe to Resize
Go back to the main menu, installing Google Apps should work without problems now
Voilà. You have just successfully gapp'ed your phone .
Step 5: Rooting your ROM (Optional)
Thanks to Magisk, rooting is incredibly easy these days. All you have to do is head over to the Magisk releases page on Github and download the latest .zip-file.
Once it's downloaded, install the .zip-file via TWRP and reboot into your OS.
For Magisk to work, you also need to have the latest Magisk Manager apk installed, which you also find on the above Github page, however I found that all GSI ROMs already have this included anyway (It appears to be included in Phh-Treble AOSP) - so all you need to do is really install Magisk in TWRP.
The preinstalled Magisk Manager will probably be outdated and ask you to update, which it can do itself. So most times, you won't even have to download the Magisk Manager apk yourself.
Step 6: Installing a working Xposed Framework (Optional)
As easy as it has become to root a phone these days, it is becoming increasingly harder to get Xposed to work as active development has been rather stalled lately. Luckily enough, someone was kind enough to unofficially get Xposed to work on Android Pie, however, this time it's a Magisk module.
Getting it to work on the Mi 8 Pro is a different matter. I have found that only certain versions do actually work and offer the Xposed functionality I have gotten so used to. If you install the specific versions I'm mentioning here, Xposed should work without problems (But as always, not all Xposed modules are still under active development and therefore won't work with Android Pie or this new unofficial version of Xposed).
To get Xposed up and running, you need to have Magisk installed already (see Step 5).
I'm currently running AOSP 9.0 (v123) and these more recent Riru package versions run fine (If you have trouble with these, check the links below) - I could only install them directly via Magisk but not in TWRP:
Riru - Core (19.7)
Riru - Ed Xposed 0.4.6.2.4529 (YAHFA)
You will also need this app installed to manage your Xposed framework and to activate Xposed modules:
The latest Ed Xposed Manager which you can download here.
For older custom Android Pie ROMs, these Riru packages were the only versions that I could successfully get working:
Riru - Core (17.1)
Riru - Ed Xposed 0.4.1.2_beta (YAHFA)
The older Riru packages can be installed directly via TWRP or in Magisk, but since you have to reboot afterwards if you install it from inside your OS, you might as well just install the two .zip-Files from TWRP directly after installing Magisk in TWRP.
The latest Ed Xposed Manager is simply an apk, so you will have to install it after booting into your system. Easy as Pie. Have fun EdXposing your system to new functionality .
Step 7: Special fixes
As I've layed out before, custom ROMs are prone to come with certain functionality missing or malfunctioning. This is especially the case with GSI ROMs that weren't developed with our specific device in mind. Nevertheless most functions will work without bigger problems right away. Some problems might still arise, but luckily there are solutions.
Sending and receiving SMS messages
After I had installed my GSI ROMs, it took me a while to realize I wasn't getting any text messages (they're not that frequent any more anyway). This is because I had to change my preferred network setting (for whatever reason). If you set it like this, everything should work as expected:
Preferred network type
4G (Recommended)
Click to expand...
Click to collapse
Bluetooth Media Streaming
I also didn't realize right away that there was a Bluetooth problem. Calls were working fine, people could hear me talking, I could hear them talking. Things got a bit weirder, when I tried to listen to music streaming from my phone to my Bluetooth speaker - it simply wouldn't work. Nada - no matter what I tried. Luckily I came across a .zip-file that worked wonders. If you install the FixGsiBTSound.zip file in TWRP that I was able to find in this XDA thread, Bluetooth media is streaming without any problems and calls continue to work.
Unfortunately, I still have to change Bluetooth Audio Codec to AAC in the Developer options every time I connect my speaker if I want to listen to music and get driving instructions via Google Maps at the same time. It automatically reverts back to SBC but after I've made the change I can have several apps stream audio at the same time, which might be a problem with my speaker that only supports SBC but I didn't have this problem with my old phone.
By the way, none of the other fixes in the thread mentioned above (specifically the VoLTE fix) were working for our phone when I tried them.
List of working GSI ROMs
This post is meant to give an overview of ROMs that can be installed and booted into on the Mi 8 Pro as long as you follow my installation guide.
To give a more complete picture, I have also included the ROMs I couldn't get to boot into a working OS.
The Mi 8 Pro is an ARM64 - A Only device, so make sure you only try to install ARM64 - A Only GSI images.
I first ended up using AOSiP (August 19, 2019 version) after having given MSM Xtended a try. However, after half a year my screen started flickering, so I reflashed a stock MIUI to send my phone back for repairs, which is when I discovered that the screen still seemed to be working. This might have been just a coincidence and the screen may still have some issues that are just not showing, but it is, of course, also possible that a custom GSI ROM could mess with your hardware.
I'm now using AOSP 9.0 (v123) with Magisk, Substratum and EdXposed and I'm really happy with it. If you're interested in why, you can read more about it here.
Please help me expand this list - feel free to test other or newer ROMs you can find via these lists on Github and on XDA .
Android 9.0 (Pie)
AOSP 9.0 / Phh-Treble
v123 - reported working with MIUI 11.0.5.0.PECMIXM by Laurisss :good:
Image file 1: system-arm64-aonly-vanilla-nosu.img.xz (11.12.2019 / without Google Apps preinstalled)
Image file 2: system-arm64-aonly-gapps-su.img.xz (11.12.2019 / Including Google Apps)
v119
Image file 1: system-arm64-aonly-vanilla-nosu.img.xz (23.08.2019 / without Google Apps preinstalled)
Image file 2: system-arm64-aonly-gapps-su.img.xz (23.08.2019 / Including Google Apps)
XDA page
All releases: See this page
AOSiP
Image file: AOSiP-9.0-GSI-arm64_aonly-20190819.img (19.08.2019)
All releases: See this page
ArrowOS
Discovered by PCrazee :good:
Image file: system_arm64_a.zip (27.01.2020)
XDA page
All releases: See this page
Bliss OS
Image file 1: Bliss-2019-04-11-arm64-a-stock.img.xz (11.04.2019 - without Google Apps)
Image file 2: Bliss-2019-04-05-arm64-a-gapps.img (05.04.2019 - Google Apps preinstalled)
This OS only started on second boot (boot animation loop on first boot); the camera app was not functional and it seemed a bit unstable on the Mi 8 Pro
XDA page
Release page: Check it out here
Descendant
Image file: Descendant_4.0.1_arm64_aonly (06.08.2019)
This image file can be "dirty-flashed", i.e. if you follow my installation guide, don't wipe the system partition as you normally would when installing a GSI ROM
XDA page
All releases: See this page
FlokoROM
Image file: system-arm64-aonly-vanilla-nosu.img.zip (09.06.2019)
All releases: See this page
Lineage OS 16.0 (AndyYan)
Image file: lineage-16.0-20190811-UNOFFICIAL-treble_arm64_avN.img.xz (11.08.2019)
Newer images available - if they work for you, let me know and I will update this section
XDA page
All releases: See this page
MSM Xtended
Image file: MSM_Xtended-20190820-arm64_a.img.xz (20.08.2019)
There are newer versions, if they work on the Mi 8 Pro, please let me know
XDA page
All releases: See this page
Pixel Experience (Unofficial)
Image file: PixelExperienceP-arm64-aonly.zip (24.03.2019)
This is an older version, but unfortunately the only version I could get to boot - if you find a newer one that works on the Mi 8 Pro, please let me know
XDA page
All releases: See this page
Zirconium AOSP
Image file: ZirconiumAosp-9.0-IGNITE-arm64-a-20190319.rar (19.03.2019)
Release page: Check out this page
/e/
Reported working by PCrazee :good:
Image file: e-pie-20190827-UNOFFICIAL-treble_arm64_aeN.img.zip (27.08.2019)
XDA page
More releases: See this page
Android 8.1 (Oreo)
Please note that I only tested three ROMs to see if I could get Oreo ROMs working as well. As there is no support to hide the Mi 8 Pro notch in Oreo ROMs and as I managed to get Xposed working on Pie, I quickly abandoned Oreo again .
Nevertheless, please let me know if there are any other Oreo GSI ROMs out there that you got working on the Mi 8 Pro so I can expand this section.
AOSP 8.1 / Phh-Treble
Image file 1: system-arm64-aonly-vanilla-nosu.img.xz (06.07.2019 / without Google Apps preinstalled)
Image file 2: system-arm64-aonly-gapps-su.img.xz (06.07.2019 / Including Google Apps)
XDA page
Release Page: Check it out
Resurrection Remix (phhuson)
Image file: system-arm64-aonly.img (20.05.2018)
XDA page
Android 9.0 (Pie) (Non-working)
I couldn't find a working version Pie version for:
AOSP Extended
HavocOS
nitrOS
Resurrection Remix
Android 8.1 (Oreo) (Non-working)
I couldn't find a working Oreo version for:
Treskmod
Special apps and functionality
Google Camera with Night Sight
Installing a modded Google Camera app helps you get the most out of your camera, especially when using Night Sight or the Playground that aren't available to most non-Pixel devices out of the box.
In order to enable the special Google Camera features, the Camera2Api needs to be enabled. This can be done by going into Magisk and downloading and installing Pix3lify which enables some other Pixel features (I found that running my phone with AOSiP and Pix3lify also gave me a much nicer Pixel-like experience to the one that Pixel Experience offered (this applies at least to the version of Pixel Experience I could get to work on the Mi 8 Pro).
To get a working modded Google camera
Open Magisk Manager and download and activate the module Pix3lify, then restart
Download a modded Google Camera apk such as BSG's MI9SE V4_P2 which can be found on this page.
There are many Google Camera mods out there and you can find a pretty extensive list here.
However, BSG's MI9SE V4_P2 was the only mod that had both the camera (including Night Sight) and the video camera working correctly, even though it doesn't seem to offer all the functionality that other Google Camera mods seem to provide.
Should you find any other modded version that might be working even better on the Mi 8 Pro, I'd be happy to hear from you.
Augmented Reality / Playground support
Even if you have Google's ARCore (Google Play Services for AR) installed on your device, it doesn't mean it's up and running. There's a built-in check that makes sure your device is officially supported and - you guessed it - the Mi 8 Pro isn't (whereas the Mi 8 is).
I'm assuming here that you've already have ARCore installed, but if you haven't, you can download and install this version: ARCore_1.12.19082605.apk.
The important steps to getting it to work, are:
Go into your Magisk Manager and install the module MagiskHide Props Config
Make sure you have a terminal app installed, I've had some good experience with Termux
Open your terminal app and enter the following commands
Code:
su
props
1 [COLOR="Silver"](Edit device fingerprint)[/COLOR]
f [COLOR="Silver"](Pick a certified fingerprint)[/COLOR]
22 [COLOR="silver"](Xiaomi)[/COLOR]
7 [COLOR="silver"](Xiaomi Mi 8)[/COLOR]
1 [COLOR="silver"](Android version 8.1.0)[/COLOR]
y [COLOR="silver"](change fingerprint)[/COLOR]
y [COLOR="silver"](reboot)[/COLOR]
From now on, your Mi 8 Pro will identify itself as a Mi 8, enabling ARCore and thus any Augmented Reality app.
You probably also want to enable your Google Camera AR feature:
If you're on Android Pie, download and install Playground_2.5build-2.6.190725076.apk
If you're on Android Oreo, download and install ARStickers_All_Pack_V1.5build-1.3.180720036.apk
Afterwards you are able to download "Playmojis" from within your Google Camera (More > Playground). However, sometimes you're out of luck and Google Play will stubbornly tell you that your device is not compatible with a selected package (e.g. Avengers: Endgame or Childish Gambino).
In this case, simply download the corresponding apk package directly from apkmirror.com and you should be all set.
More information on the Google Cam AR support can be found here.
Reserved
This looks great! I'll have to try it and see if I can get it to work.
yo-less said:
List of working GSI ROMs
Android 9.0 (Pie) (Non-working)
I couldn't find a working version Pie version for:
AOSP Extended
HavocOS
nitrOS
Resurrection Remix
Click to expand...
Click to collapse
I have had HavocOS (My favourite GSI ROM that I have tried) working n the Mi 8 Pro, as well as nitrOS. Never got RR to boot (bootanimation? didn't try to delete it) and never tried AOSP Extended.
nealed said:
I have had HavocOS (My favourite GSI ROM that I have tried) working n the Mi 8 Pro, as well as nitrOS. Never got RR to boot (bootanimation? didn't try to delete it) and never tried AOSP Extended.
Click to expand...
Click to collapse
Thanks for your reply!
Are you saying you have had it boot using the steps I have outlined here? If yes, please let me know the exact version you got to boot, preferably with a link, and I will add it to the list of working ROMs. After I had finally figured out how to install GSI ROMs successfully in a way that can be reproduced, I went through the same motions every time I tried a GSI ROM and all the ROMs in my list were booting into the system, however, no version of HavocOS that I could find was booting up after going through the above steps and I tried several times and different versions, too, because some people seem to think it's a great ROM.
yo-less said:
Thanks for your reply!
Are you saying you have had it boot using the steps I have outlined here? If yes, please let me know the exact version you got to boot, preferably with a link, and I will add it to the list of working ROMs. After I had finally figured out how to install GSI ROMs successfully in a way that can be reproduced, I went through the same motions every time I tried a GSI ROM and all the ROMs in my list were booting into the system, however, no version of HavocOS that I could find was booting up after going through the above steps and I tried several times and different versions, too, because some people seem to think it's a great ROM.
Click to expand...
Click to collapse
Havoc-OS-v2.8-20190811-phhgsi_arm64_a-Official.img was the one I had working. I have yet to find a consistent way of installing GSI ROMs. Havoc was the same. I had boot loops and also managed to boot the ROM, could not be sure that there were any differences in approach. I have tried with the latest september release of Havoc and could not get it working..
Back to LineageOS for me... Too many issues with GSI ROMs.. until I can get VoLTE OR Fingerprint working, I shall stay with LineageOS - it's really OK with MAgisk XPosed and Faceunlock... with VoLTE working well.
nealed said:
Havoc-OS-v2.8-20190811-phhgsi_arm64_a-Official.img was the one I had working.
Click to expand...
Click to collapse
Thanks for letting me know the version you got to boot. I'll give it a try to see if I can get it to work using the method I've described here - if yes, I'll add HavocOS to the list of working ROMs.
I really liked the privacy features LineageOS offers but as far as OS customization is concerned I always felt it was lacking. And as I can live without VoLTE (Didn't even know what it was until I read that my new phone supports it ) and face unlock is working fine, I'm very happy with AOSiP for now, everything I use on a daily basis is working without any hitches and the system is super responsive.
yo-less said:
Thanks for letting me know the version you got to boot. I'll give it a try to see if I can get it to work using the method I've described here - if yes, I'll add HavocOS to the list of working ROMs.
I really liked the privacy features LineageOS offers but as far as OS customization is concerned I always felt it was lacking. And as I can live without VoLTE (Didn't even know what it was until I read that my new phone supports it ) and face unlock is working fine, I'm very happy with AOSiP for now, everything I use on a daily basis is working without any hitches and the system is super responsive.
Click to expand...
Click to collapse
You list VoLTE as not working in your OP, but say you can'r live without it. Could you please detail how you got VoLTE working on your Mi 8 Pro with AOSiP please? OR any other GSI ROMs for that matter. Thanks.
Haven't had time to try it yet, but there is another dev version of HavocOS GSI: https://sourceforge.net/projects/ha...90914-phhgsi_arm64_a-Official.img.xz/download Unfortunately, it takes me a lot of time to get my phone back to the state I want it (encrypted, decryptable by TWRP, all SD Card content present, working) when testing as I often lose the encryption and have to copy all SDcard content back to TWRP restore.... if it was just as simple as that I woudl have no prroblem, but it's not. Anyway, for those willing to try, another HavocOS GSI that may or may not work on the Mi 8 Pro.
Also, I think it important to list the vendor image and firmware images used with GSI ROMs as these can have an impact on how things work .
nealed said:
You list VoLTE as not working in your OP, but say you can'r live without it. Could you please detail how you got VoLTE working on your Mi 8 Pro with AOSiP please? OR any other GSI ROMs for that matter. Thanks.
Click to expand...
Click to collapse
Here's what I wrote:
And as I can live without VoLTE
Click to expand...
Click to collapse
So as I've outlined, I know of no way to get it to work at this stage but if anyone does, please let us know
Haven't had time to try it yet, but there is another dev version of HavocOS GSI: https://sourceforge.net/projects/ha...90914-phhgsi_arm64_a-Official.img.xz/download
Click to expand...
Click to collapse
I will test the ROMs you have mentioned to see if they work using the method I've described here.
Also, I think it important to list the vendor image and firmware images used with GSI ROMs as these can have an impact on how things work .
Click to expand...
Click to collapse
I've tried to streamline the ROM installation process as much as possible, if you follow Step 1 of my guide, you should be all set and don't have to worry about flashing additional vendor or firmware images. It is, of course, possible to start experimenting with vendor images as well, but the process I've outlined here seems to work fine for all the ROMs I've listed.
Thanks for your clarifications Jens. I appreciate it.
yo-less said:
Here's what I wrote:
So as I've outlined, I know of no way to get it to work at this stage but if anyone does, please let us know
Click to expand...
Click to collapse
My bad, I need to learn to read English :laugh:
yo-less said:
I've tried to streamline the ROM installation process as much as possible, if you follow Step 1 of my guide, you should be all set and don't have to worry about flashing additional vendor or firmware images. It is, of course, possible to start experimenting with vendor images as well, but the process I've outlined here seems to work fine for all the ROMs I've listed.
Click to expand...
Click to collapse
So all of these test results are with the 10.2.2 vendor. As the vendor partition plays a big role with GSI images, other vendor images may break / improve some functionality. It is important that this is understood and eventually documented with regards results of working / non working GSI images.
I have a question, why can't we just port Mi 8 (dipper) Roms? Is there anything hardware differences besides the fingerprint reader and front camera?
nealed said:
So all of these test results are with the 10.2.2 vendor. As the vendor partition plays a big role with GSI images, other vendor images may break / improve some functionality. It is important that this is understood and eventually documented with regards results of working / non working GSI images.
Click to expand...
Click to collapse
I would love for more users to report back their findings - the more community data we can gather, the better this guide will become over time. As it stands, I'm pretty happy that I've found a way of reliably getting all the ROMs I have listed to fully boot. When I started out, it was all trial-and-error, trying different firmware versions and GSI ROMs, also flashing different vendor images on top, and nothing seemed to work. Feel free to experiment with me and see if you can find different methods (including firmware / vendor images) of getting GSI ROMs to boot reliably.
eremeya said:
I have a question, why can't we just port Mi 8 (dipper) Roms? Is there anything hardware differences besides the fingerprint reader and front camera?
Click to expand...
Click to collapse
I'm not a ROM developer but I look at it that way: As much as it's not possible to install a Mi 9 ROM on the Mi 8 Pro, it's also not possible to install a Mi 8 ROM on a Mi 8 Lite or Mi 8 Pro. You can't even install a dipper TWRP image on an equuleus device, give it a try - you will see it won't work.
Ideally a ROM would detect what kind of device you have and adjust its code accordingly. But as of now, every device needs its own specifically tailored ROM. But GSI ROMs seem to try and give us a way out of this situation.
The question I'm asking myself is why there is virtually no custom ROM development happening for the Mi 8 Pro - this is the first time I own an Android device that can't be easily customized (or unlocked - but that's a different matter).
yo-less said:
I'm not a ROM developer but I look at it that way: As much as it's not possible to install a Mi 9 ROM on the Mi 8 Pro, it's also not possible to install a Mi 8 ROM on a Mi 8 Lite or Mi 8 Pro. You can't even install a dipper TWRP image on an equuleus device, give it a try - you will see it won't work.
Ideally a ROM would detect what kind of device you have and adjust its code accordingly. But as of now, every device needs its own specifically tailored ROM. But GSI ROMs seem to try and give us a way out of this situation.
The question I'm asking myself is why there is virtually no custom ROM development happening for the Mi 8 Pro - this is the first time I own an Android device that can't be easily customized (or unlocked - but that's a different matter).
Click to expand...
Click to collapse
I might normally agree with your idea but the hardware is almost exactly the same except for the finger print reader and the front camera so in theory it should be fine except for those. A different example might be installing Poco phone roms on a Mi 8 or Mi 8 roms on a Mi 8 Ursa.
eremeya said:
I might normally agree with your idea but the hardware is almost exactly the same except for the finger print reader and the front camera so in theory it should be fine except for those. A different example might be installing Poco phone roms on a Mi 8 or Mi 8 roms on a Mi 8 Ursa.
Click to expand...
Click to collapse
I'm not saying it's beyond possible to make it happen, all I'm saying is that it doesn't seem to work as the hardware is not the same - or have you been able to install a Mi 8 ROM on a Mi 8 Pro? I couldn't even get a Mi 8 TWRP running on a Mi 8 Pro, so I'm guessing the difference does matter.
yo-less said:
I'm not saying it's beyond possible to make it happen, all I'm saying is that it doesn't seem to work as the hardware is not the same - or have you been able to install a Mi 8 ROM on a Mi 8 Pro? I couldn't even get a Mi 8 TWRP running on a Mi 8 Pro, so I'm guessing the difference does matter.
Click to expand...
Click to collapse
I tried with one rom and it failed to install. It gave an error about the zip not being signed or signed wrong. I modified a file in to ROM zip to remove references to dipper. (This is the process that is done to install Poco phone Roms on a Mi 8). I'm not sure how to modify the rom zip and re-sign it so it installs. Unfortunately I don't have much time right now to experiment as I'm busy with school.
eremeya said:
I tried with one rom and it failed to install. It gave an error about the zip not being signed or signed wrong. I modified a file in to ROM zip to remove references to dipper. (This is the process that is done to install Poco phone Roms on a Mi 8). I'm not sure how to modify the rom zip and re-sign it so it installs. Unfortunately I don't have much time right now to experiment as I'm busy with school.
Click to expand...
Click to collapse
Sounds like an interesting route, so if you follow it through and get it to work, please let us know how you made it happen.
Testing day yesterday, I am currently running HavocOS, with the just released chinese Xiaomi V11.0.2.0.PECCNXM vendor.
I believe that to get it working, SELinux needs to be set to permissive.
Steps taken to boot:
1. Flash 10.3.4 ROM using Xiaomi Flash tool - wiping and cleaning everything, including data and SDCard.
2. Boot and set passcode.
3. Reboot to Bootloader
4. Flash recovery-TWRP-3.3.0-0504-XIAOMI8UD-CN-wzsx150 TWRP.img to recovery partition
5. Boot recovery-TWRP-3.3.0-0504-XIAOMI8UD-CN-wzsx150
6. Factory Reset
5. Flash Havoc-OS-v2.9-20190914 (thread, download
6. Flash permissiver-v4 by erfanoabdi for GSI images
7. Boot
8. Upon reboot to recovery - wipe cahche / dalvik, reboot recovery, then reboot system
9. If you are sent back to recovery. Just reboot - it will boot eventually.
10 Subsequently, from TWRP, resize system partition and flash gapps (yes, you can do this and everything works fine. I have done this on plenty of occasions. It is also possible to invoke the android one time setup wizard if you need that to restore from a backup etc.).
11. Flash Magisk 20.0
12. Flash PolarKernel (see this section for download and details)
HavocOS allows:
Using gesture navigation (I use OnePlus gestures) - native feature
Using Face unlock with the option of dismissing the lock screen automatically - native feature
Hide the clock (great for our notched devices (for me anyway as I have a clock widget on the home screen anyway)) to gain valuable screen real estate - native feature
Battery circle icon - native feature
Great theme options built in
Many more features.
I am reaching out to some devs to see if I cannot cook this for our Mi 8 Pro. I would dearly love to get the under screen fingerprint working. On one hand others have tried and failed. On the other, I'm not sure how much effort has gone in to the trials - as this is not exactly the most popular device on the planet. Not many devs have it.
However, with fanix-uk working on LineageOS - and possibly the FP sensor - as well as the possibility of having VoLTE and infrared face unlock (as is present in LineageOS for Mi 8 Pro) working - this would be my perfect setup.
Despite not having VoLTE (I may do some tests today) I am considering staying with this setup as it really is great. Time will tell...
Related
Dear every one, I really like this ROM, but how to flash this ROM?
I try to flash to use fastboot and TWRP with IMG flashIng, but after flashing them, the mobile phone will jump to Bootloader page, but when I use the same method in other ROM(like PHH and RR6.1.0)it works. My last ROM version is MIUI10-8.7.12 Globle.
details here
1.formate data
2.4 wipe
3.install and choose img file with system type.
4.wipe again
5.reboot
THanks.
If supported you can flash the image in bootloader mode.
Type in this command.
fastboot flash system nameofimage.img and reboot.
PE just wont boot for some devices. There is a whole different thread about fixing this, it may be for Huawei, but it could work for more devices. Apparently flashing a patched boot from Magisk works.
flash magisk 16.6 it will boot. but then you will have to also format data(not wipe) in twrp to disable encryption.
It finally works!
The steps I took to get it working are the following:
1. Boot to TWRP (I used version 3.2.0.1/v5 from here: https://forum.xda-developers.com/xiaomi-mi-mix-2s/development/recovery-twrp-mix-2s-t3790922
2. Format data, confirm with "yes"
3. Wipe data, system, cache, dalvik
4. Install latest Pixel Experince.img (GSI) from the thread on XDA
5. Flash magisk 16.6 directly after the image. Didn't do a reboot before flashing magisk
6. Rebooted system
7. Got many warnings that the device is not Google certified. Search for this terms and you'll find a tutorial to get rid of the messages. Simply downloaded the "device+ID.apk" from XDA and installed it. Wrote down the GSF ID and visited the mentioned page and got my device registered. Warnings are gone, play services are running perfectly fine. Here's the link to the article https://www.google.at/amp/s/www.xda...fix-device-not-certified-by-google-error/amp/
8. Rebooted system again
Works like a charm. Got everything set up to my needs. Only thing I had to configure was the navigation bar as it was hidden from the beginning. Just opened settings and toggled the navigation bar settings from one setting to the other and it appeared.
Will definitely be my daily driver from no on. Finally we can have a "Pixel" for half the price!
I'm so happy right now. Thanks to all the people who supported me and answered all my questions!
kleinholzinferno said:
It finally works!
The steps I took to get it working are the following:
1. Boot to TWRP (I'm using version 3.2.0.1)
2. Format data, confirm with "yes"
3. Wipe data, system, cache, dalvik
4. Install latest Pixel Experince.img (GSI) from the thread on XDA
5. Flash magisk 16.6 directly after the image. Didn't do a reboot before flashing magisk
6. Rebooted system
7. Got many warnings that the device is not Google certified. Search for this terms and you'll find a tutorial to get rid of the messages. Simply downloaded the "device+ID.apk" from XDA and installed it. Wrote down the GSF ID and visited the mentioned page and got my device registered. Warnings are gone, play services are running perfectly fine. Here's the link to the article https://www.google.at/amp/s/www.xda...fix-device-not-certified-by-google-error/amp/
9. Rebooted system again and it works like a charm. Got everything set up to my needs. Only thing I had to configure was the navigation bar as it was hidden from the beginning. Just opened settings and toggled the navigation bar settings from one setting to the other and it appeared.
Will definitely be my daily driver from no on. Finally we can have a "Pixel" for half the price!
I'm so happy right now. Thanks to all the people who supported me and answered all my questions!
Click to expand...
Click to collapse
didnt worked for me rebooted into recovery i used 3.2.1-0 can you link me yours?
From this thread
https://forum.xda-developers.com/xiaomi-mi-mix-2s/development/recovery-twrp-mix-2s-t3790922
I used version 5 because in version 6 usb MTP mode is disabled.
Which rom did you come from? I came from a working official resurrection remix gsi. But I don't know if this matters as you wipe everything from the device.
Have you ever had a treble gsi running on your device? I remember installing RR after the android P beta from Xiaomi failed. I then started from scratch and installed the latest official global stable miui rom for the MiMix2S from Xiaomi without magisk and all and went from there. Don't know why but this fixed the problem with the RR gsi.
Maybe theres a problem with older mods you have done. You could try and start from zero and get the device back into the original state.
Hope it works out for you! Let us know how it turned out. Could be anyone else has some more input for you.
I know it's frustrating to flash a rom that works for others and not on your device although you have the same as them and followed every step in the tutorial. I've been there so many times that I lost count but it's always the little things that cause problems. Take your time, read some more about this whole stuff. I had to read a lot to get into this topic. Maybe theres a nother method of flashing that works for you.
kleinholzinferno said:
From this thread
https://forum.xda-developers.com/xiaomi-mi-mix-2s/development/recovery-twrp-mix-2s-t3790922
I used version 5 because in version 6 usb MTP mode is disabled.
Which rom did you come from? I came from a working official resurrection remix gsi. But I don't know if this matters as you wipe everything from the device.
Have you ever had a treble gsi running on your device? I remember installing RR after the android P beta from Xiaomi failed. I then started from scratch and installed the latest official global stable miui rom for the MiMix2S from Xiaomi without magisk and all and went from there. Don't know why but this fixed the problem with the RR gsi.
Maybe theres a problem with older mods you have done. You could try and start from zero and get the device back into the original state.
Hope it works out for you! Let us know how it turned out. Could be anyone else has some more input for you.
I know it's frustrating to flash a rom that works for others and not on your device although you have the same as them and followed every step in the tutorial. I've been there so many times that I lost count but it's always the little things that cause problems. Take your time, read some more about this whole stuff. I had to read a lot to get into this topic. Maybe theres a nother method of flashing that works for you.
Click to expand...
Click to collapse
i started from 0 flashed in order global official miui rom after rr and after pixel experience all ok without strange messages
PITTAR said:
i started from 0 flashed in order global official miui rom after rr and after pixel experience all ok without strange messages
Click to expand...
Click to collapse
Very good, great it works for you now.
Enjoy the new phone! I have it running for a few days now and so far I love it! I'm never going back to miui again! Never!
Some things are not working at the moment like Bluetooth audio to car stereo. Although it shows the song playing with the title and the correct time on the car head unit I hear no sound. Hands free calls work without any problems.
In band ringing doesn't work so I don't hear my ringtone over the car stereo. I can activate this in developer options but it doesn't stay on and doesn't work. Nevermind, this isn't important.
Haven't found many other things that I need at the moment.
Great rom, hope it gets maintained in the future and there will be a device specific rom for the MiMix2S in the near future.
Hopefully Android P in fall/winter?
kleinholzinferno said:
It finally works!
The steps I took to get it working are the following:
1. Boot to TWRP (I'm using version 3.2.0.1/v5 from here: https://forum.xda-developers.com/xiaomi-mi-mix-2s/development/recovery-twrp-mix-2s-t3790922
2. Format data, confirm with "yes"
3. Wipe data, system, cache, dalvik
4. Install latest Pixel Experince.img (GSI) from the thread on XDA
5. Flash magisk 16.6 directly after the image. Didn't do a reboot before flashing magisk
6. Rebooted system
7. Got many warnings that the device is not Google certified. Search for this terms and you'll find a tutorial to get rid of the messages. Simply downloaded the "device+ID.apk" from XDA and installed it. Wrote down the GSF ID and visited the mentioned page and got my device registered. Warnings are gone, play services are running perfectly fine. Here's the link to the article https://www.google.at/amp/s/www.xda...fix-device-not-certified-by-google-error/amp/
8. Rebooted system again
Works like a charm. Got everything set up to my needs. Only thing I had to configure was the navigation bar as it was hidden from the beginning. Just opened settings and toggled the navigation bar settings from one setting to the other and it appeared.
Will definitely be my daily driver from no on. Finally we can have a "Pixel" for half the price!
I'm so happy right now. Thanks to all the people who supported me and answered all my questions!
Click to expand...
Click to collapse
Thanks for sharing so much...but I wanna know flashing Magisk 16.6 is significant or not? Why should I must flash that..caz I use bank App which is not allowed root device..Oh, I try to flash Omin ROM, but it can't get into the system..and Magisk16.6 can't be flashed in with error..
jayxiao171735 said:
Thanks for sharing so much...but I wanna know flashing Magisk 16.6 is significant or not? Why should I must flash that..caz I use bank App which is not allowed root device..
Click to expand...
Click to collapse
Magisk was mandatory for me because otherwise it ended up booting only to recovery.
I haven't tried what happens when you uninstall magisk after successfully setting up the device.
If you need to hide root use magisk hide, maybe that helps?
The below is a guide to installing GSI images on the Mi 8 Pro. I specifically have experience with the PixelExperience 9.0 (Unofficial) but have had other GSI ROMs booting and working. I hope this is useful for some.
GSI (Generic System Image) ROMS can be flashed to any Project Treble enabled device. These devices have either an A/B partition layout (these allow for seamless updating as the system can boot from A or B partition) or just an A only partition layout. The Mi 8 Pro is an arm64 a only device and support project treble ROMs. You can choose from suitable ROMs listed here and here.
The instructions given below are for Android Pie (9.0). The same basic setup can be used for Android Oreo (8.0, 8.1) ROMs, but the Mi 8 Pro should be flashed with the appropriate Xiaomi base ROM first before flashing any 8 based GSI ROM
As the ROM development for the Mi 8 Pro is basically dead, I decided to buy a OnePlus 6T and sell my Mi 8 Pro. However, due to having my new OnePlus 6T stolen, and due to a lack of funds to buy a new device, I have revived my Mi 8 Pro to try to get something other than MIUI working on it. I now have The PixelExperience (Unofficial) GSI ROM running very smoothly on my Mi 8 Pro.
As the PixelExperience team has stated they will be delivering GSI images again, if there are enough of us asking, we could get better support for things like the fingerprint sensor, for a more complete experience.
Some of the below steps may be unnecessary, but are there for a complete beginner's guide to doing this and getting the right results.
Working:
WiFi
Bluetooth (with APTX)
NFC (Including Google Pay)
RIL
Mobile data (LTE / HSPDA / 3G / EDGE)
GPS
Camera (with camera built in to ROM, as well as some GCAM implementations)
Video Camera (not working on GCAM implementations tested so far - only working on Camer built in to ROM)
Flashlight
Sound / Vibrations
Face Unlock
Hotspot
Not Working:
VoLTE (I have had it working, but unable to end phone calls and problems receiving SMS messages, so reverted)
Fingerprint (There is some support. The fingerprint area of the screen lights up when trying to enrol a new fingerprint. The screen dims when a finger is placed on the sensor, and a green light us emitted from the sensor area, but it does not register the fingerprint and this is not currently working.)
Notification LED
You Tell Me
How to install
Flash the latest Fastboot Global Stable Android PIE (9.0) ROM for the Mi 8 Pro. (eg. equuleus_global_images_V10.3.4.0.PECMIXM_20190712.0000.00_9.0_global_9a181f79c1.tgz) using the Xiaomi Tool.
Update: Use the latest MIUI system. The contents of the vendor partition are important. The most compatible vendor partition as of 2019-08-19 is from equuleus_global_V10.3.5.0.PECMIXM. You can download and flash that vendor independantly, if you have already set up your GSI image.
Reboot and finish basic MIUI setup.
Reboot to recovery.
[*]Format data (Wipe - Advanced - format data - confirm by typing yes)
DO NOT FORMAT DATA. Just perform a factory reset. Formatting data can cause issues and prevent booting.
Wipe Cache - Dalvik Cache and System
Reboot recovery
Use adb to push PixelExperience GSI image (img file extracted from download) and latest version of Magisk to root of SDCard. (Empty due to formatting data).
("adb push c:\path\system.img /sdcard/" and then "adb push c:\path\Magiskv19.3.apk /sdcard/")
Flash the image to system partition by taping INSTALL and then on the "Install Image" button (to toggle between flashing zip and img files). Do not reboot yet.
Flash magisk zip in the normal way (hit the same button as in previous step to show zip files to flash. (This is necessary to avoid bootloops)
Reboot, and enjoy.
You can now set up your "PixelExperience" device with your apps and settings, including registering a face for face unlock.
To pass cts validation for the safetynet and to allow service such as Google Pay to work
In Magisk, under settings - Find “Magisk Hide” and toggle the switch on
Magisk restarts. Go to Magisk Hide from the Magisk menu and ensure that...
Google Pay
Google Play
Google Play Services
Google Service Framework
Any Banking Apps
...are checked so that they cannot see Magisk (canont see phone as rooted).
Now go to downloads and install the SafetyPatch v3 module (created by hackintosh5).
Reboot.
Open settings - go to apps and notifications - and find the above apps to clear all data.
Enjoy your rooted safetynet compliant, as close to stock as possible Xiaomi Mi 8 Pro.
nice work thanks for this great notice, i will test PixelExperience, how work the face unlock? i use the finger print very much, all day, but not work i will use the facial unlock. Then i wanna know how work this.
thanks!!
axelgrox said:
nice work thanks for this great notice, i will test PixelExperience, how work the face unlock? i use the finger print very much, all day, but not work i will use the facial unlock. Then i wanna know how work this.
thanks!!
Click to expand...
Click to collapse
Face unlock works fine. I have it paired with Pick to wake phone - so when I pick it up it wakes up to allow face unlock.
However, be prepared for some investment of time (not for face unlock).... I am a bit stuck now and cannot reproduce the above to get this working. Sometimes the results are different depending on base ROM etc.
Share how you get on and anything you may need to do to get this working.
Thanks
Nice work, i will try it .
The mi8 pro 's fingerprint is so bad which can be ignored, and the face unlock is the mostly used, hahahah
thank you very much for your work
Hi, I am waiting to unlock bootloader. Need 148hrs. Will install this. Thanks for sharing.
Quick update: There are some issues with GSI ROMs and the Mi 8 Pro. SOe of these relate to the SIMcard settings - and selection of preferred SIM for data, calls etc.
My experience shows that the vendor image from equuleus_global_V10.3.5.0.PECMIXM fixes many of these. The vendor image from the original MIUI ROM is used with the GSI system image to make the whole Project treble stuff work. I advise flashing this latest vendor image for maximum compatibility.
Do you know what issues remain after flashing the latest vendor image?
Does the face unlock on Pixel Experience work with IR camera or front cam?
I tried installing this and it got stuck on the loading screen with the Google logo. I tried following your instructions and a few other ways and couldn't get it to work at all i'm also not able to root my phone at all. When ever I try rooting my phone just reboots to twrp until I reflash the ram or flash the magisk uninstaller.
Do you have any tips, tricks, or suggestions I might try?
Thanks!
eremeya said:
I tried installing this and it got stuck on the loading screen with the Google logo. I tried following your instructions and a few other ways and couldn't get it to work at all i'm also not able to root my phone at all. When ever I try rooting my phone just reboots to twrp until I reflash the ram or flash the magisk uninstaller.
Do you have any tips, tricks, or suggestions I might try?
Thanks!
Click to expand...
Click to collapse
Have experienced this on occasion also.
What GSI image have you tried? after my multiple efforts, I would recommend... in this order: Omni. HavocOS, Descendant(no future updates), PIxelExperience. I am hopeful about the PixelExperience team who have made an announcement that as of August they will no longer produce CAF versions of PixelExperience, and that they will maintain regular GSI builds also. PE official GSI - I am full of hope.
Anyway, back on topic: Try this.
Follow the instructions - a few precisions:
Use XiaoMiFlash to flash the equuleus_global_images_V10.3.4.0 as a base. You can update the vendor partition once you have GSI up and running, but don't let the MIUI update to 10.3.5. Ensure you define a PIN to make sure that data partition is encrypted. (everyone should use encryption nowadays, and besides, I have had bad experiences whn using a xiaomi eu or mi-globe ROM (unencrypted) as the base
Reboot and finish basic MIUI setup. - What I mean here is to let the ROM boot, don't have to sign in to Google or Mi, but get to the home screen after the initial setup.
Then reboot fastboot and flash TWRP 3.3.0. Search for TWRP-3.3.0-0504-XIAOMI8UD-CN-wzsx150.zip.
Boot to TWRP. Make sure that you are able to decrypt the data partition with the PIN you set earlier. If TWRP does not ask you for the passcode / PIN - something is wrong. Try again. ONce all is OK in TWRP, perform factory reset. (DO NOT FORMAT DATA for the aforementioned encryption reason).
adb push the img file.
adb push the Magisk 19.3 zip.
Flash both in TWRP
Reboot TWRP
Reboot system. If it appears to hang, after 5 minutes you can force restart with the power button. I have had the ROM boot OK after second boot only?
Pretty sure that if you strictly follow the above you should get a working GSI image on Mi 8 Pro. Let me know...
It's a bit flaky to set up, but once set up, apart from fingerprint sensor not working, very stable and lovely to have the stock ish android system on a MIUI phone!
Be careful with preferred network type for mobile network as some selections have messed up incoming SMS messages for me... a dealbreaker.
What happens when you flash Magisk? What does TWRP say? Have you tried flashing Magisk, rebooting TWRP, and flahing Magisk again? It may be a TWRP version issue?
Thanks for your reply!
The version of twrp you mention is what I have used. I have not tried installing then rebooting to twrp so I try that.
When flashing magisk it usually flashes fine (I have had a couple times where it just throws an error) then when I reboot the phone will boot past the Mi logo the the Android boot logo then after 10-15 sec. it just reboots to twrp.
I was finally able to get the twrp to stick across boots by flashing twrp, signing boot image, removing twrp then reboot to Miui.
Do I need to adb push the GSI image or should it be fine to install from a USB drive?
The SMS issue isn't really a big deal for me as I use Google Fi routed through hangouts for one sim and a local sim where I'm living for mostly data and a few phone calls for the second one
Thanks so much for this post. I was completely oblivious to the fact that the Mi 8 Pro would actually be different to the Mi 8 when it comes to custom roms. When I decided on my next phone, I read the positive reviews and saw enough Mi 8 roms to be willing to make a switch to Xiaomi. Until I read your post I was close to despairing as I don't want a Xiaomi rom on my phone for various reasons (among them is the fact that I don't trust them and the way they have decided to collect user data).
I've tried to follow your guide in every step (I've also flashed the updated vendor.img), but unfortunately I have not been able to install the Pixel Experience rom on my device. I do see the boot animation but it never stops, I'm forever stuck with the Google-G and the progress bar below it. Has anyone else managed to install the Pixel Experience rom on the Mi 8 Pro? If yes, did you follow the guide here or did you do something else?
Also, in your initial post you write that we should wipe the system in TWRP but as far as I can tell GSI roms need you to wipe data, cache and dalvik cache but not the system partition (if you do it, you also don't get asked for your PIN code in TWRP any more, which - as you said - indicates that something went wrong).
Did you install a particular version of the Pixel Experience rom? Maybe that might be part of my issue?
I have try many times installing it. Didn't manage to boot it up.
Finally, tested with Miroom ROM as base then flash the system.img manage to boot up.
Don't know why it didn't boot but at lease any one who have issue booting may want to try using Miroom rom as base.
tllim73 said:
I have try many times installing it. Didn't manage to boot it up.
Finally, tested with Miroom ROM as base then flash the system.img manage to boot up.
Don't know why it didn't boot but at lease any one who have issue booting may want to try using Miroom rom as base.
Click to expand...
Click to collapse
What did you do to install miroom? I've been trying to install it and it just stays on the boot screen. The only non-official from I've been able to install and boot is the unofficial LineageOS rom by fenix-UK.
eremeya said:
What did you do to install miroom? I've been trying to install it and it just stays on the boot screen. The only non-official from I've been able to install and boot is the unofficial LineageOS rom by fenix-UK.
Click to expand...
Click to collapse
I install it using twrp 3.3.0 version. Build 0503. But before that I have install the stock rom goble stable version 10.3.5.0. update FW & Vendor using the same twrp.
tllim73 said:
I install it using twrp 3.3.0 version. Build 0503. But before that I have install the stock rom goble stable version 10.3.5.0. update FW & Vendor using the same twrp.
Click to expand...
Click to collapse
Thanks.
Is your phone a Chinese version or EU version? Were you able to root global stock rom?
eremeya said:
Thanks.
Is your phone a Chinese version or EU version? Were you able to root global stock rom?
Click to expand...
Click to collapse
Hi, I am using a Chinese version. But once you unlock it you will be able to flash any version with the twrp.
I try rooting it with magisk but unable to boot up. That's why I turn to Miroom Rom. They have done something which can boot it up.
tllim73 said:
Hi, I am using a Chinese version. But once you unlock it you will be able to flash any version with the twrp.
Click to expand...
Click to collapse
I'm also using the Chinese version but no matter what I try I cannot root the global version of the rom. I can root the Chinese version fine.
eremeya said:
I'm also using the Chinese version but no matter what I try I cannot root the global version of the rom. I can root the Chinese version fine.
Click to expand...
Click to collapse
Might be the developer version is only for the Chinese Rom. Anyway I am happy now running with GSI Rom.
eremeya said:
I'm also using the Chinese version but no matter what I try I cannot root the global version of the rom. I can root the Chinese version fine.
Click to expand...
Click to collapse
What version of TWRP are you using?
Does anyone have experience with this Official LineageOS Rom in Pixel 3a?
Official Device Info/Wiki:
https://wiki.lineageos.org/devices/sargo
Official Installation instructions:
Install LineageOS on sargo | LineageOS Wiki
wiki.lineageos.org
Official Download Link for LineageOS ROM and Lineage RECOVERY:
LineageOS Downloads
download.lineageos.org
Horninho10 said:
Does anyone have experience with this Official LineageOS Rom in Pixel 3a?
Official Device Info/Wiki:
https://wiki.lineageos.org/devices/sargo
Official Installation instructions:
Install LineageOS on sargo | LineageOS Wiki
wiki.lineageos.org
Official Download Link for LineageOS ROM and Lineage RECOVERY:
LineageOS Downloads
download.lineageos.org
Click to expand...
Click to collapse
Yes, it runs nice and smooth, I was recently on LOS.
The post I'm about to make is not related to anything technical, so I'm not sure if it's appropriate on this forum, but I'm going to post it anyway...
Is there any advantages lineage has over stock? Seems like it's not really worth it. Right? What do you guys think about build?
pojr said:
The post I'm about to make is not related to anything technical, so I'm not sure if it's appropriate on this forum, but I'm going to post it anyway...
Is there any advantages lineage has over stock? Seems like it's not really worth it. Right? What do you guys think about build?
Click to expand...
Click to collapse
I personally am running stock for SafetyNet purposes at the moment. I do think it's worth checking out if you want a few more options for customization. It was a very smooth ROM, but LOS in specific is not my cup of tea.
MoistPicklez said:
I personally am running stock for SafetyNet purposes at the moment. I do think it's worth checking out if you want a few more options for customization. It was a very smooth ROM, but LOS in specific is not my cup of tea.
Click to expand...
Click to collapse
That is a very good point actually. That is one thing I was never a big fan of with the stock OS, is just the lack of options you have to customize your device. Might be worth getting it, even though it's a downgrade to Android 10
pojr said:
That is a very good point actually. That is one thing I was never a big fan of with the stock OS, is just the lack of options you have to customize your device. Might be worth getting it, even though it's a downgrade to Android 10
Click to expand...
Click to collapse
Test it out if you're interested, but A11 ROMs are likely around the corner. I bet we'll get a build or two of something else down the road. Cheers!
I've personally had GPS issues (while using OpenGapps Pico) with the official release. Hoping A11 builds fix it.
Aah, a much needed rom option for sargo/pixel 3a ! There has been a lot of silence around the pixel 3a in this regard.
I'm trying it out now. First thing I noticed is SIM manager keeps crashing every minute or so (I'm in the Netherlands on the Ben/T-mobile network). If there is a dev out there I can supply a logcat or something like it if needed.
Meanwhile I disabled the SIM manager to get rid of the constant crash notifications. I'll try and report back any issues I encounter (But if there are too many of them, I'll have to revert back to Dirty Unicorns, although that rom development seems to have stalled pretty much).
I seem to have overcome my GPS woes! My installation process was the following:
Install the last Android Q factory image
Flash LOS boot, go to recovery
Factory reset
Install update > adb sideload LOS zip
Very important(?) - go back to main menu, advanced, reboot to recovery
Install update > adb sideload opengapps pico zip > yes, install anyway
Sign in to your Google account during the initial setup process
Test GPS with an app (Google Maps, Waze, OSMAnd, Pokémon Go... )
The only issue I seem to have now is that the Google Fi app doesn't seem to get that my Fi service is ESIM based, and prompts me to order a physical SIM card, but playing with the mobile service settings seems to have gotten my service set up anyway.
EDIT: After talking with Google Fi support, going to Settings > System > Reset Options > Reset Wi-Fi, mobile & Bluetooth, check erase downloaded SIMs, then trying to activate Google Fi again in the app, it worked.
In addition to the helpful tips from @Mokura3rd. My two cents: I had some gps issues as well, but didn't test it to great extent. Here's a description of my (rather weird issue):
When I first installed Lineageos (jan16 - my previous comment), Google maps and Gps status were able to find gps signal (and quicky), but strava didn't find any gps signal (it didn't even ask for permission, which I granted manually - to no avail).
Some time after the first OTA update, I checked strava again. And it worked without issue. So there might have been merged some bugfixes that fixed gps issues on recent builds.
guys, is it true you have to jump down to Android 10 in order to get the latest lineage? that doesn't make sense. Don't you have to wipe your phone in order to switch from stock to custom anyway? seems pointless to downgrade to stock 10 first. what's your guys stance on this?
pojr said:
guys, is it true you have to jump down to Android 10 in order to get the latest lineage? that doesn't make sense. Don't you have to wipe your phone in order to switch from stock to custom anyway? seems pointless to downgrade to stock 10 first. what's your guys stance on this?
Click to expand...
Click to collapse
Because lineageos 17.1 is based on Android 10, you have to revert to stock Android 10 before you install it. The same goes for any ROM that is based on Android 11.
MoistPicklez said:
Because lineageos 17.1 is based on Android 10, you have to revert to stock Android 10 before you install it. The same goes for any ROM that is based on Android 11.
Click to expand...
Click to collapse
Thank you for clearing that up with me. Now I at least have an answer on that. With that said, why would that be? Don't you have to wipe your phone in order to switch from stock to custom anyway? Is the ROM gonna say "we have somehow detected the you once had Android 11 before you wiped your OS"
pojr said:
Thank you for clearing that up with me. Now I at least have an answer on that. With that said, why would that be? Don't you have to wipe your phone in order to switch from stock to custom anyway? Is the ROM gonna say "we have somehow detected the you once had Android 11 before you wiped your OS"
Click to expand...
Click to collapse
Android changes quite a bit between versions like dynamic partitions and other jazzy stuff. For example TWRP. It works on Android 9, but changes to our device made TWRP incompatible with A10 and A11. (Good news on that though, we just got TWRP 3.5.0_9-0, though I have not tested it.)
MoistPicklez said:
Android changes quite a bit between versions like dynamic partitions and other jazzy stuff. For example TWRP. It works on Android 9, but changes to our device made TWRP incompatible with A10 and A11. (Good news on that though, we just got TWRP 3.5.0_9-0, though I have not tested it.)
Click to expand...
Click to collapse
did not realize we got a new twrp version. thats a step in the right direction. with that said, that info is good to know. i'm a lazy ass and prolly not gonna test out lineage os until it gets on 11 lmao.
For whoever needs it. I sure did after a derped update last week!
tl;dr install update, disable all modules before booting, get the latest recovery image and patch it, install with fastboot. long version below, just in case.
How To OTA With Magisk, Painlessly:
Open updater and download the OTA.
Press install and let it do its thing, but DON'T REBOOT YET.
Go to Magisk and disable all your modules.
Okay, you can reboot now. It might take longer than usual, it's a system update.
Open Magisk and note that it's no longer installed, don't panic.
Download the recovery image matching your update from here: https://download.lineageos.org/sargo
Open Magisk and patch the img you just downloaded.
Copy the magisk_patched_(random).img to a folder on your computer where you're able to access fastboot.
Reboot your phone to bootloader: either by the advanced power menu, enabled in developer settings, or by restarting and holding Volume Down while the phone boots up.
Open up your terminal/commandline/etc where you moved the image file.
Type the command "fastboot flash boot magisk_patched_*****.img", where the last part is the random string that got generated in the patching process. Press Enter.
After the command finishes, use the volume keys to scroll through the bootloader menu until you see "Start". Press the power button.
Your phone should reboot back to the OS, you can now go back to Magisk and re-enable your modules at your leisure.
So the one problem 'I've been having is with custom kernels. I've tried Elemental X & Gats Gulch. With both I lose wifi capability. Once I restore my lineage kernel viola problem solved. Now I've used both these kernels in the past on different builds so I know it isn't the kernel itself rather something related to the lineage build itself & the act of installing a custom kernel. Both kernels returned exactly the same type of error. WIFI attempts to turn on but returns to the off Position. If one attempts to activate the Wifi Icon dropdown during the System UI Crashes. Any input would be great. Other than this little hiccup
Lineage is running absolutely great. Best battery life of any custom OS by far. Sargo stays snappy, my kernel tweaks remain in place. Root maintains over system restores. Love it.
EDIT: ## By the way using Elemental X Kernel Manager App to flash ##
harryharryharry said:
Aah, a much needed rom option for sargo/pixel 3a ! There has been a lot of silence around the pixel 3a in this regard.
I'm trying it out now. First thing I noticed is SIM manager keeps crashing every minute or so (I'm in the Netherlands on the Ben/T-mobile network). If there is a dev out there I can supply a logcat or something like it if needed.
Meanwhile I disabled the SIM manager to get rid of the constant crash notifications. I'll try and report back any issues I encounter (But if there are too many of them, I'll have to revert back to Dirty Unicorns, although that rom development seems to have stalled pretty much).
Click to expand...
Click to collapse
Just go into app settings and kill now & disable. I noticed that if you installl gapps, get rooted, setup the phone you prefer. Backup with google backup....use the lineage recovery to do a factory reinstall. Once you recover all the sim issues, installation issues simply stop.
nylar357 said:
So the one problem 'I've been having is with custom kernels. I've tried Elemental X & Gats Gulch. With both I lose wifi capability. Once I restore my lineage kernel viola problem solved. Now I've used both these kernels in the past on different builds so I know it isn't the kernel itself rather something related to the lineage build itself & the act of installing a custom kernel. Both kernels returned exactly the same type of error. WIFI attempts to turn on but returns to the off Position. If one attempts to activate the Wifi Icon dropdown during the System UI Crashes. Any input would be great. Other than this little hiccup
Lineage is running absolutely great. Best battery life of any custom OS by far. Sargo stays snappy, my kernel tweaks remain in place. Root maintains over system restores. Love it.
EDIT: ## By the way using Elemental X Kernel Manager App to flash ##
Click to expand...
Click to collapse
The kernel issues might be because they're targeted toward Android 11, and LOS 17.1 is based on Android 10.
harryharryharry said:
[...] First thing I noticed is SIM manager keeps crashing every minute or so (I'm in the Netherlands on the Ben/T-mobile network). [...]
Meanwhile I disabled the SIM manager to get rid of the constant crash notifications.[...]
Click to expand...
Click to collapse
It happened to me the same way. I am in the German T-Mobile network. I also disabled 'SIM Manager'.
Unfortunately, I do not receive any 'missed call'-SMS in case the mobile phone was in flight mode.
I think the app could have something to do with it because everything fits on the ISP side. So far, I haven't found an option to reactivate the App in the settings. Apparently it's some kind of hidden app. Can someone help please?
EDIT: There is a "hidden" "System-apps" option in the app settings. Unfortunately the error still occurs.
Hey everybody,
I'm currently running a custom ROM and would like to go back to a stock ROM and then on to the xiaomi.eu ROM but after downloading the latest MiFlashTool from the site in the title and extracting it, Windows didn't like it when I wanted to run it and when you run it as admin UAC says it has an unknown publisher (shouldn't it be Xiaomi?).
Even after I proceed it asks me to install 5 drivers (google, nvidia, microsoft, microsoft & qualcomm) so I got a bit nervous and cancelled the driver installation.
Just want to confirm if I'm using the right site and that it's ok to install the drivers that it wants me to install. With the latter, I was wondering if they are necessary because even if I cancel the driver installation the MiFlashTool application doesn't close.
Just looking for some advice, thanks!
What do you mean "Windows didn't like it"
Yes the drivers are trustable. ^^
I'd say Recovery-route is more safe:
You can use TWRP / OrangeFox Recovery to flash MIUI.zip -> Format Data -> Boot System
Then you can flash Xiaomi.eu.zip -> Format Data.
Get the MIUI Stock ROM from xiaomifirmwareupdater.com
You can also go the Fastboot route, by using Mi Flash & Fastboot-flashable MIUI Stock ROM.
The previously mentioned website also has MIUI Fastboot ROMs.
o3266013 said:
Hey everybody,
I'm currently running a custom ROM and would like to go back to a stock ROM and then on to the xiaomi.eu ROM but after downloading the latest MiFlashTool from the site in the title and extracting it, Windows didn't like it when I wanted to run it and when you run it as admin UAC says it has an unknown publisher (shouldn't it be Xiaomi?).
Even after I proceed it asks me to install 5 drivers (google, nvidia, microsoft, microsoft & qualcomm) so I got a bit nervous and cancelled the driver installation.
Just want to confirm if I'm using the right site and that it's ok to install the drivers that it wants me to install. With the latter, I was wondering if they are necessary because even if I cancel the driver installation the MiFlashTool application doesn't close.
Just looking for some advice, thanks!
Click to expand...
Click to collapse
I believe that MiFlashtTool ver. 20200314 works perfectly on windows 10. This link provides ROM files directly from Xiaomi servers.
cyanGalaxy said:
What do you mean "Windows didn't like it"
Yes the drivers are trustable. ^^
I'd say Recovery-route is more safe:
You can use TWRP / OrangeFox Recovery to flash MIUI.zip -> Format Data -> Boot System
Then you can flash Xiaomi.eu.zip -> Format Data.
Get the MIUI Stock ROM from xiaomifirmwareupdater.com
You can also go the Fastboot route, by using Mi Flash & Fastboot-flashable MIUI Stock ROM.
The previously mentioned website also has MIUI Fastboot ROMs.
Click to expand...
Click to collapse
Thanks for the reply.
This is an example of what Windows would show when I ran the app.
Why do you say that recovery is more safe? As someone who is pretty new to custom roms, are recovery ones always safer to install than fastboot ones?
I noticed that you're using Arrow OS 13, I'm actually currently using Arrow 11 and was looking to install Arrow 13 initially but it hasn't shown up on the forum yet. I assumed they were working on it but haven't released the offical version to the public yet.
o3266013 said:
Thanks for the reply.
This is an example of what Windows would show when I ran the app.
Why do you say that recovery is more safe? As someone who is pretty new to custom roms, are recovery ones always safer to install than fastboot ones?
I noticed that you're using Arrow OS 13, I'm actually currently using Arrow 11 and was looking to install Arrow 13 initially but it hasn't shown up on the forum yet. I assumed they were working on it but haven't released the offical version to the public yet.
Click to expand...
Click to collapse
You can safely continue on the Windows SmartScreen Dialog.
>Why do you say Recovery is more safe?
With Fastboot Mode, there are outside factors: E.g. the USB-connection may cut off, your PC may hang, or Power Loss... those things would abort the flash...
But this is just an extreme end.
If it does happen, that the Fastboot Flash aborts due to an outside-factor (e.g. Power Loss etc.), then *do not* attempt to reboot your phone. Simply fix those outside-factors and start the Flash again. You may need to disconnect and reconnect your phone to your PC.
I say "Do not attempt to reboot Fastboot Mode after an aborted Flash", because during the Flash, critical partitions (like for Fastboot Mode) may have been erased off of the phone, but not successfully reflashed (because of the Abort).
But like I said that's only an extreme end. An extreme end which I had to experience tho unfortunately, because I have a PC with a motherboard with faulty USB-ports (common issue on AMD X570 motherboards). What was very wrong from my part tho, is that I rebooted my phone and it got hardbricked, because it couldn't load Fastboot or Recovery (due to the aborted Fastboot Flash). I fixed it, but it was a huge pain in the butt.
But you could have the same thing happening using Recovery + ADB Sideload. In that case you could just redo the ADB Sideload Flash.
About ArrowOS: I use the latest unofficial v13 version from the Telegram Group "mipa_lab", it's Palaych's group, who is the maintainer of ArrowOS for Poco F3.
But he said that he may not do Official ArrowOS ROMs anymore, but will only do unofficial ArrowOS v13 builds. - Or he may move away from ArrowOS, he wasn't clear about that. He did confirm the December Security Patch is in the works tho!
Note that for all devices ArrowOS v12.1 Updates are discontinued due to the small infrastructure of this small project. So they are focusing on v13.
About his ArrowOS v13 builds tho, I can say they are very stable and don't feel unofficial at all. Almost all features are available.
However Fonts & WiFi/Signal custom icon-styles are missing, and also the Bluetooth Audio Codecs LDAC and "AptX Adaptive" specifically. Normal AptX is integrated tho.
I do feel like switching to CrDroid 9 tho, because it's another Vanilla-type ROM but instead with lots of Customisability. One thing that was bothering last time I tried CrDroid tho, was that Dolby wasn't working on headphones, only over the speakers.
But ArrowOS 13, I can vouch for, as a minimalistic AOSP ROM ^^ very stable.
Has anyone been offered the Global version by their phone and updated ?
If Yes - what is your experience with MIUI 14 and does Dark mode work for individual apps listed separately in dark mode options?
Just received a notification for the update. Should one do a factory reset once upgraded?
EDIT: Ok, just updated and decided I'd just do a factory reset afterwards to start clean. Is it just me or do the graphics, icons and such look a little more blurry now?
Today monring i make an update, it is super. System is faster, but Leica cam app is not possible instal, have anybody newer version of leiaca cam app fo A13? THX
thecumbackkid said:
Just received a notification for the update. Should one do a factory reset once upgraded?
EDIT: Ok, just updated and decided I'd just do a factory reset afterwards to start clean. Is it just me or do the graphics, icons and such look a little more blurry now?
Click to expand...
Click to collapse
@thecumbackkid - Please tell me in settings - display - more dark mode options - does it list all the individual apps to choose dark mode for each app ? (it may take a second or 2 to list them)
This is what it shows for me.
Thanks for the info thecumbackkid
Looks like its time to upgrade I was stuck on Miui 12.5 as when I updated to 13 all individual dark mode apps options disappered.
Someone stole my phone on holiday so I bought a new one and stuck on 12.5 as Dark mode for individual apps is essential for my over sensitive eyes!
I did the OTA update yesterday.
Before installation I uninstalled magisk, and reinstall it the inactive partition after update, before the reboot prompt.
Everything worked fine but be patient. The phone restart at least 5 times during boot logo. I was suspecting a boot loop but it finally started.
Everything is smooth, magisk root still work, safety net fix was kept.
For the moment the only thing which failed was a Google Keep Widget I had to remove and reinstall to home screen.
Except some little icon changes in notifications I didn't notice lot of changes but it is only after some minutes of utilisation.
Edit : password manager like Bitwarden seems to detect better than before that new password was entered.
snyfear said:
I did the OTA update yesterday.
Before installation I uninstalled magisk, and reinstall it the inactive partition after update, before the reboot prompt.
Everything worked fine but be patient. The phone restart at least 5 times during boot logo. I was suspecting a boot loop but it finally started.
Everything is smooth, magisk root still work, safety net fix was kept.
For the moment the only thing which failed was a Google Keep Widget I had to remove and reinstall to home screen.
Except some little icon changes in notifications I didn't notice lot of changes but it is only after some minutes of utilisation.
Edit : password manager like Bitwarden seems to detect better than before that new password was entered.
Click to expand...
Click to collapse
@snyfear
Thanks for the info - if you notice anything else let us know
Awful battery drain here. Charged to 100% barely did some basic browsing and half is already gone in a short amount of time. Noticed whenever I have it charged to 100% at night and by the middle of the next day where I barely use it for nothing but just to check for notifications on stuff it's already down to 80%...
AFAIK, this appears to be some pilot program build? I never asked to participate in it so how did I get this update?
Does any one know how to Facemoji keyboard in MIUI 14 for Lisa ?
I am not rooted. its plain stock MIUI.
Tried ADB shell uninstall, it gave me failure.
Also tried Xioami debloater tool. That also didnt work.
I still haven't received the update for some reason and i tried to update it manually but it didn't work what should I do
Updated to 14.0.4 EUXM and can't get root to work anymore.
Patched the boot image via Magisk 25.2 and then tested via fastboot, as always.
I run directly into a bootloop, which after a while sometimes returns to the bootloader or automatically deletes the temporary boot and boots with the normal image.
It's also strange that during the bootloop the device vibrates once every 3-5 seconds briefly. I've never had that before either.
Update:
I found a solution without wiping my device.
I remembered that I had a problem during the last update with shamiko and I didn't uninstalled magisk or removed any modules before the update. So in order to remove the modules without access to /data/adb and wihtout root rights you need to do the following, maybe it's interesting for you folks.
1. Open shell with command: "adb wait-for-device shell magisk --remove-modules"
2. Open second shell and boot with patched boot.img: "fastboot boot boot_patched.img"
The short time at boot, where root is present, was enough to remove the modules via the CLI during the boot loop.
Lessons learned:
Before the next major update definitely remove all Magisk modules before, if not root entirely.
Saves the work afterwards.
Btw:
Update is running smoothly so far. No battery drain noticed.
can anyone link me to a tutorial on how to rollback from custom rom (currently AOSPA) to stock MIUI ROM? want to move to MIUI 14 eventually. greatly appreciate it!
You can also install miui eu rom 14.0.6.0. If you first install via fastboot, it installs twrp with it. This way you can install future ota updates without using a computer/fastboot. In my opinion the eu rom is the same if not better as stock EEU global from xiaomi
telefoongids said:
You can also install miui eu rom 14.0.6.0. If you first install via fastboot, it installs twrp with it. This way you can install future ota updates without using a computer/fastboot. In my opinion the eu rom is the same if not better as stock EEU global from xiaomi
Click to expand...
Click to collapse
hey, thanks for the reply! just a few questions, there's no possibility of triggering anti rollback right? I was reading that some ppl faced it - I moved to custom roms from MIUI 13 iirc.
also where can I find the link to the .eu ROM? thanks again!
theanik said:
hey, thanks for the reply! just a few questions, there's no possibility of triggering anti rollback right? I was reading that some ppl faced it - I moved to custom roms from MIUI 13 iirc.
also where can I find the link to the .eu ROM? thanks again!
Click to expand...
Click to collapse
I dont believe the Xiaomi.eu roms have a anti rollback trigger. The previous roms are all a complete package (firmware, recovery, rom etc.) you flash them via fastboot.
The latest 14.0.6.0 comes with twrp. But you have to flash the rom with fastboot first, to get twrp installed.
Here's the link:
MIUI 14 - MIUI 14 STABLE RELEASE
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
Just search for mi11le in the downloads.
telefoongids said:
I dont believe the Xiaomi.eu roms have a anti rollback trigger. The previous roms are all a complete package (firmware, recovery, rom etc.) you flash them via fastboot.
The latest 14.0.6.0 comes with twrp. But you have to flash it first with fastboot to get twrp installed.
Here's the link:
MIUI 14 - MIUI 14 STABLE RELEASE
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
Just search for mi11le in the downloads.
Click to expand...
Click to collapse
thank you!
any one from Philippines received the update?