My LuisKERNEL (PIE/TEN) for Samsung Galaxy Tab S5e (gts4lvwifi/gts4lvlte)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Notice
I like to share my work for my Samsung Galaxy Tab S5e (LTE). I have compiled this kernel so that my Galaxy Tab performs better and rooting with Magisk works better.
I'm testing this kernel on my Samsung Galaxy Tab S5e (gts4lvwifi) device and I think it should work on the Samsung Galaxy Tab S5e LTE (gts4lvlte) too.
The kernel I use on the latest Samsung Stock ROM with Magisk 20.3 and Magisk Manager App + Ex Kernel Manager.
The source code is a fork from the official LineageOS 17.1 sources.
The kernel runs for me with LineageOS and Stock Samsung ROM.
Sometimes I get a lot of help or feature requests from users of my LuisROMs and LuisKERNELs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
Kernel: I have pached up the Kernel to Linux 4.9.217 with many mods other devs (thanks to @LuK1337 for the base an incredible work!)
Pached from 4.9.112 up to 4.9.217 from caf
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Added fsync on/off support.
Disabled crc check
Optimized for performance and battery life
Compatible with EX Kernel Manager
Compatible with systemless root (recommend Magisk 20.x or higher !!!)
Wireguard kernel support
Many other misc. improvements not listed here
First time installation:
Unlock the bootloader, 1. Connect to WiFi network, 2. Enable OEM Unlock in developer options, 3. Turn off the tablet, Boot to download mode manually by plugging in USB and holding all the buttons for few seconds, 4. Follow instructions on the screen
Connect to WiFi network and make sure OEM Unlock in developer options is still checked
Flash custom VBMeta image ( http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/vbmeta.tar ) in Odin ( use AP slot )
After flashing VBMeta, boot to stock. It'll likely ask you to wipe data, if so do that
Connect to WiFi network and make sure OEM Unlock in developer options is still checked
Now you can flash TWRP ( gts4lvwifi > https://dl.twrp.me/gts4lvwifi ) or ( gts4lvlte > http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/twrp-3.3.1-0-gts4lvlte.img.tar ) in Odin ( use AP slot once again ), for convenience you can hold volume up while flashing it so that you boot to recovery right after it's flashed
Boot into TWRP (press power and vol+)
Install latest LuisKERNEL (.img) LuisKERNEL-4.9.XXX-twrp-2020XXXX.img
Optional: Install latest Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Reboot ( make sure to not install TWRP app when TWRP asks you to )
Update:
Boot into TWRP (press power and vol+)
Install latest LuisKERNEL (.img) LuisKERNEL-4.9.XXX-twrp-2020XXXX.img
Reboot ( make sure to not install TWRP app when TWRP asks you to )
Downlads:
Link cr LuisROM & LuisKERNEL: http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/
Kernel source:
Github: https://github.com/FraEgg/android_kernel_samsung_sdm670/commits/10.0-luis-los
Enjoy!
Frank
Just got the device today, Happy to see a kernel is available for the device.
Shall try it once I confirm device is working fine ( to void warranty). Feel the device is pretty sluggish with default kernel.
Does this kernel have kcal support?
Thanks a lot for the kernel.
update - Tried the kernel on sm-T720 , worked without issues. No kcal support.
- please consider adding kcal/color/saturation options if possible.
Thanks
tuxing said:
update - Tried the kernel on sm-T720 , worked without issues. No kcal support.
- please consider adding kcal/color/saturation options if possible.
Thanks
Click to expand...
Click to collapse
With Stock or LOS?
I'm currently LOS 16, am considering LOS 17.
Thanks
TiTiB said:
With Stock or LOS?
I'm currently LOS 16, am considering LOS 17.
Thanks
Click to expand...
Click to collapse
Tested only with pie los16 and stock based roms.
Cu Frank
tuxing said:
update - Tried the kernel on sm-T720 , worked without issues. No kcal support.
- please consider adding kcal/color/saturation options if possible.
Thanks
Click to expand...
Click to collapse
Kcal will merged in the next days if stable Testing today ))
Cu Frank
TiTiB said:
With Stock or LOS?
I'm currently LOS 16, am considering LOS 17.
Thanks
Click to expand...
Click to collapse
Forgot to mention , used the kernel with stock ROM.
I too am currently on los16.
---------- Post added at 08:54 AM ---------- Previous post was at 08:50 AM ----------
8224Freak said:
Kcal will merged in the next days if stable Testing today ))
Cu Frank
Click to expand...
Click to collapse
Thanks
I bought a used tab s5e from a local electronics store for less than half of the msrp. I then discovered that it wouldnt charge past 70%. Later I peeled off the sticker on the back and the tablet said 'not for sale'. It turns out that this was a display unit and these are configured to not charge past 70% to protect the battery. I didn't want to return it because it was a really good deal even if it doesn't fully charge. My question is will flashing this kernel allow my tablet to charge to 100%? Or this kernel will not be compatible with it? Thanks in advance.
AlexCano said:
I bought a used tab s5e from a local electronics store for less than half of the msrp. I then discovered that it wouldnt charge past 70%. Later I peeled off the sticker on the back and the tablet said 'not for sale'. It turns out that this was a display unit and these are configured to not charge past 70% to protect the battery. I didn't want to return it because it was a really good deal even if it doesn't fully charge. My question is will flashing this kernel allow my tablet to charge to 100%? Or this kernel will not be compatible with it? Thanks in advance.
Click to expand...
Click to collapse
There's an option in the battery settings that limits the tablet from charging beyond 85% to extend the battery life, you can take a look at that first. If that doesn't help, you can try a custom ROM and Kernel. Start with the kernel, as it is less intrusive. but to be honest, I have no idea if that would help. You can also try a factory reset.
If I was a betting man, I'd bet on Samsung limiting that device's charging capacity though the ROM.
Is there a way to go back to stock kernel if desired?
Thank you. Love it.
But if i will be asked to install the kernel, where to install the kernel?
Boot or....
Thank you.
Clandaries said:
Thank you. Love it.
But if i will be asked to install the kernel, where to install the kernel?
Boot or....
Thank you.
Click to expand...
Click to collapse
Yes. Boot partition.
Cu Frank
Thanks for your method
Magisk V20 and V21 (Canary) have problem with T720 and gives vbmeta error.
Your method makes V21 (Canary) successfully installed as well as ROM up to date.
8224Freak said:
(omitted. See first post)
Frank
Click to expand...
Click to collapse
---------- Post added at 05:59 PM ---------- Previous post was at 05:56 PM ----------
AlexCano said:
I bought a used tab s5e from a local electronics store for less than half of the msrp. I then discovered that it wouldnt charge past 70%. Later I peeled off the sticker on the back and the tablet said 'not for sale'. It turns out that this was a display unit and these are configured to not charge past 70% to protect the battery. I didn't want to return it because it was a really good deal even if it doesn't fully charge. My question is will flashing this kernel allow my tablet to charge to 100%? Or this kernel will not be compatible with it? Thanks in advance.
Click to expand...
Click to collapse
Try to install official full ROM (use Frita to grab ROM) and flash with Odin (CSC to wipe everything) and see first.
If everything works as it's supposed to, do everything at first post (flash kernel as boot)
You may need to install Magisk Manager and you may need to run few setup for it.
Everything is working nicely. Thank you
Following your steps worked. Thanks for sharing
[kernel] [pie] [9]
After installing [KERNEL] [PIE] [9] LuisKERNEL GTS4LVLT, the tablet appeared in the device manager. But it is not visible in the conductor and nothing can be copied to the micros. Is everything visible in the conductor with the stock carnel. Is this a problem?
rbns said:
After installing [KERNEL] [PIE] [9] LuisKERNEL GTS4LVLT, the tablet appeared in the device manager. But it is not visible in the conductor and nothing can be copied to the micros. Is everything visible in the conductor with the stock carnel. Is this a problem?
Click to expand...
Click to collapse
I have the same problem. I get the error "The connected device is unable to access data on this device." That seems to be the only problem. I can't move files between the tablet and the PC. I have the 128GB Wifi version. I'm on stock Pie firmware with this kernel and rooted with Magisk v20.0.
xXMenaXx said:
I have the same problem. I get the error "The connected device is unable to access data on this device." That seems to be the only problem. I can't move files between the tablet and the PC. I have the 128GB Wifi version. I'm on stock Pie firmware with this kernel and rooted with Magisk v20.0.
Click to expand...
Click to collapse
Same here. No connection to PC
Results of yesterday's experiments: 1.Installed stock Rom (tablet launched and it can be seen in the Explorer) 2.Installed TWRP (tablet launched and it can be seen in the Explorer).3.Installed Magisk (the tablet did not start.Constant restart).Installed LuisKERNEL (tablet launched and it is not visible in the Explorer).
rbns said:
Results of yesterday's experiments: 1.Installed stock Rom (tablet launched and it can be seen in the Explorer) 2.Installed TWRP (tablet launched and it can be seen in the Explorer).3.Installed Magisk (the tablet did not start.Constant restart).Installed LuisKERNEL (tablet launched and it is not visible in the Explorer).
Click to expand...
Click to collapse
I've got the same problem at the end as well. My computer wasn't able to identify the tablet.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
We recommend MindTheGApps. OpenGApps should work, but please make sure you clearly mention the gapps you're using when reporting bugs.
Get CarbonROM
Join the CarbonROM Discord server
GitHub
Gerrit
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
Credits:
Huge thanks to everyone below, without whom this would have not been possible.
* rcstar6696 (and everyone else who helped with the shinano bring up - these guys are the best)
* SpiritCroc
* Myself5
* The entire CarbonROM team
XDA:DevDB Information
CarbonROM, ROM for the Sony Xperia Z1
Contributors
drakonizer
Source Code: https://github.com/CarbonROM
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: AOSP + CAF
Version Information
Status: Alpha
Created 2017-12-25
Last Updated 2018-05-22
CHANGELOGS:
All changes can be tracked here:
https://blog.carbonrom.org/changelog
You can find the changelog prior to official builds below.
Official Build:
* Fixed Video Recording
* Improved RIL for C6903 devices
14/04/2018:
* Fixed Camera
* Fixed RIL and mobile data (on C6902 at least)
* Enforcing SELinux + user build
* Fixed Bluetooth
23/01/2018:
* Fixed audio
* Fixed thermanager
24/12/2017:
Initial Release
BUGS:
* Connecting to data for C6902 devices is buggy (read FAQ).
* NFC may or may not be broken (I cannot test it as my device does not have the NFC plate).
FAQs (Please read before posting questions):
Q: Does the ROM support OMS and theming with Substratum?
A: Yes it does! Simply enable "Allow untrusted overlays" from Settings -> CarbonFibers -> Privacy and Security and follow the instructions that follow.
Q: Does the ROM work on C6902 as well?
A: Yes, but you will face a few issues while trying to connect to mobile data. Apparently the way to make it work is by going to *#*#4636#*#* -> Phone Info, change the network mode to WCDMA only, and turn on and turn off airplane mode.
Q: Is the ROM rooted by default?
A: No, please flash your favorite root solution after installing the ROM.
Q: Do I need to make a factory reset before installing this ROM?
A: If you're moving from cr-5.1 official builds to cr-6.1 builds, then a factory reset is recommended. Some have been able to dirty flash their way from cr-5.1 to cr-6.1, but before trying that, make sure you have a backup, in case you're caught in a bootloop. Clean install is ALWAYS recommended. If you face any issues after dirty flashing, clean flash first and see if it's persistent and only then report the bug.
Q: SafetyNet?
A: Sure, if you use Magisk and enable Magisk hide.
Reserved
Nice!
Merry Christmas :victory:
Thanks for sharing carbon rom oreo, I will download and let you know whether audio and nfc work
---------- Post added at 03:41 PM ---------- Previous post was at 03:23 PM ----------
Unable to flash on latest TWRP, any ideas how to fix?
Coming from CarbonROM nougat, i already done wipe /data /system /dalvik-cache /cache
https://drive.google.com/open?id=1fVGP6Be2u5j7T8lpPkeuF_mXmQXxIw6_
miXXed404 said:
Thanks for sharing carbon rom oreo, I will download and let you know whether audio and nfc work
---------- Post added at 03:41 PM ---------- Previous post was at 03:23 PM ----------
Unable to flash on latest TWRP, any ideas how to fix?
Coming from CarbonROM nougat, i already done wipe /data /system /dalvik-cache /cache
https://drive.google.com/open?id=1fVGP6Be2u5j7T8lpPkeuF_mXmQXxIw6_
Click to expand...
Click to collapse
Try to install advanced kernel img via fastboot. Then reboot. In the kernel is twrp 3.1 included. Then you're able to boot into that recovery. Wipe all and try again to flash
MIcHiJK said:
Try to install advanced kernel img via fastboot. Then reboot. In the kernel is twrp 3.1 included. Then you're able to boot into that recovery. Wipe all and try again to flash
Click to expand...
Click to collapse
same issue
miXXed404 said:
same issue
Click to expand...
Click to collapse
Okay strange. When nothing helps try to start from the bottom and go back to stock. I will also test this rom later to check, if it's working on my third party screen.
Reflashing stock, flashing twrp again doesn't help, still same issue, something is wrong with carbon rom oreo zip
@miXXed404 update your recovery in this version https://androidfilehost.com/?fid=745425885120742869
https://forum.xda-developers.com/showthread.php?t=2522762
in any case follow the XDA link to resolve the error!
Merry Christmas!
Hansars said:
@miXXed404 update your recovery in this version https://androidfilehost.com/?fid=745425885120742869
https://forum.xda-developers.com/showthread.php?t=2522762
in any case follow the XDA link to resolve the error!
Merry Christmas!
Click to expand...
Click to collapse
Flashing recovery that you provided does not help, still same issue persist, also there is no lines in updater-script thats checking for specific device
thankyou so much....
Nevermind,somehow i managed to flash it,first impressions.. working better than nougat, at first boot up it heated up a lot, i can't enable NFC in settings, so i can't even test it, battery is draining pretty quick, gapps is working, audio is not working , i'm gonna use it for few days, maybe i will find more bugs.. and please fix thermal in this rom, 81c cpu 44 battery and still all cores is enabled on max frequency 2150mhz
miXXed404 said:
Nevermind,somehow i managed to flash it,first impressions.. working better than nougat, at first boot up it heated up a lot, i can't enable NFC in settings, so i can't even test it, battery is draining pretty quick, gapps is working, audio is not working , i'm gonna use it for few days, maybe i will find more bugs.. and please fix thermal in this rom, 81c cpu 44 battery and still all cores is enabled on max frequency 2150mhz
Click to expand...
Click to collapse
I have no issues of battery draining on my end. Nor did I face heating issues. My phone went to deep sleep and drained less than 1% an hour. Maybe you should just let it settle down for a few days and see if it helps.
If not, maybe it's me not using a SIM card or gapps giving me a better experience.
drakonizer said:
I have no issues of battery draining on my end. Nor did I face heating issues. My phone went to deep sleep and drained less than 1% an hour. Maybe you should just let it settle down for a few days and see if it helps.
If not, maybe it's me not using a SIM card or gapps giving me a better experience.
Click to expand...
Click to collapse
Really? no heating issues? try use 100% of cpu and it should throttle down frequency when it heats up, but it doesn't doing that
i'm only connected to wi-fi and charging, brightness set to 0% no apps in background.... no problems with heating? look at this
https://drive.google.com/open?id=1PMnMLuNsunStZV_Wd-AKXj8uR3FrOGCV
ΤΗΑΝΚ YOU! Merry Christmas!
miXXed404 said:
Flashing recovery that you provided does not help, still same issue persist, also there is no lines in updater-script thats checking for specific device
Click to expand...
Click to collapse
good morning, I saw that you have solved, I still do not flash because of too many bugs and the bug that is present in addition to the other bugs! thanks to the developer for the work done! @drakonizer
o be an alpha, the rom is stable.
some things do not work:
- without audio in calls and player
- root can not be activated
- the phone gets very hot
- the wifi is disconnected every time
- the sim card sometimes detects it and other times it does not
- the gapp can not be installed gives error 20 the twpr
for now just notice those problems .... thanks
rayzo_1986 said:
o be an alpha, the rom is stable.
some things do not work:
- without audio in calls and player
- root can not be activated
- the phone gets very hot
- the wifi is disconnected every time
- the sim card sometimes detects it and other times it does not
- the gapp can not be installed gives error 20 the twpr
for now just notice those problems .... thanks
Click to expand...
Click to collapse
Gapps.. use this, it will work-- https://drive.google.com/drive/folders/16D1ev3XgcjoewlPuafvlheUaqFA15cly
Root.. flash magisk it worked for me
Wi-Fi also works for me
No sim card problems
i agree that phone gets very hot, this rom is not safe to use because of overheating
miXXed404 said:
Gapps.. use this, it will work-- https://drive.google.com/drive/folders/16D1ev3XgcjoewlPuafvlheUaqFA15cly
Root.. flash magisk it worked for me
Wi-Fi also works for me
No sim card problems
i agree that phone gets very hot, this rom is not safe to use because of overheating
Click to expand...
Click to collapse
thanks
gapps work
but I do not get root with magisk 15 and 14 gives me error 1 in twrp
a question the audio works for you?
temperature in 40 degrees and more
EDUARDO193 PRESENTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Diamondl ROM is a light ROM which has enough features to satisfy your daily wants / needs but not enough to cause slowdowns or battery drains.
****Good to know****
KG State/Jail has been completely eliminated from this ROM so you don't have to worry about flashing.
Knox is faked 0x0 for some Knox apps to work.
Magisk is force enabled and won't have any issues with losing root, not being there after installing ROM
Cleared some useless codings that caused performance issues.
It includes Product/Vendor/Boot for your device so just flash it, It'll be fine no need to flash anything extra
Added some secret features like Samsungs recorder for the screen.
Nitsugua mods
Added faster Samsung boot animation mods
Added better mod compatibility (Edxposed for example no longer colides with services.jar and cause a very bugs, now fixed
Fixed camera issue
Included few CSC mods
Option for debloat in Aroma installer
Odexed and very smooth
Navbar is kept in RAM at all time to make it even faster :good:
Developer options enabled by default + USB debugging
Prerooted
8 icon in TouchWiz mod
Touch screen smoothness increased
Improved speed
Support 2 SIM 1 SD card mod! :good:
100% Camera quality instead of stock 95%
-More, check changelogs once they are added to read the rest
****DOWNLOADS****
Google Drive: https://drive.google.com/open?id=118fRH98mJqNUoZp_EsHXbk0-eAj2xG_H
MEGA: https://mega.nz/#!HaZzBACC!-Doh_FZNazsrdTWCYIlYVx6OIgqM0MK5eZV-RCQ-NKM
Screenshots:
https://imgur.com/a/SbGD9Nw < here
USING ASD5 KERNEL!! ONLY SECURITY PATCH/REST OF BASE IS ASE6, BUT ALL ASE6 FEATURES ARE INCLUDED!
THIS MEANS TWRP WORKS FINE!
How to flash:
Install TWRP patched with Magisk
Format data (if this is first time flashing custom)
Flash my ROM
Remember to not press reboot system on first boot, but rather go to TWRP home and select reboot to recovery :good:
For already custom users:
Just flash my ROM and select clean flash in the aroma, and then press finish and make sure to reboot recovery and not reboot system on first boot :good:
DEBLOATING CHROME WILL CAUSE 3RD PARTY APPS TO BREAK!!, ITS A SAMSUNG ISSUE NOT MY ISSUE
Kernel: Included kernel is stock kernel, and does not require source declarance!
-Diamond 2.0
Changelog:
-Improved speed
-Fixed ALL bugs!!, works perfectly now in all cases
-Fixed Device care
-Added 8 icons to dock in launcher mod
-Updated base to ASE6 (kernel and a few things still ASD5)
-Chrome removed from debloat options (Will cause 3rd party apps to break if deleted as they rely on it!!)
-Tested and works well on both S10 and S10+ G973F/DS/G975F/DS, not tested on N models but should work 100% fine
Links are in OP!
Remember to press thanks if this is exicting !
Thread will be updated and made look better at some point.
Will be fully rebased to ASE5 when it will fully support TWRP.
But all the things Samsung updated in this version are added in this build
Only kernel is the ASD6 one. That means ASD5/6 TWRP works fine with no camera issues
DOES NOT SUPPORT S10e yet!! this project will be updated so stay tuned!
Supported variants:
G975F
G973F
G975N
G973N
G975F/DS
G973F/DS
G973FD
G975FD
ALL CSC INSIDE
Will test in a while...
So far so good really smooth and stable. I even updated magick without any problem
kernel problem
it keeps saying installing kernel then it says failed?
Nice rom working everything thanks
For twrp are we able to flash gsi on S10?
Thanks for the rom! :victory:
At last a good reason for rooting my s10+ , I hope you will add more mods later like jpeg 100% in camera or long press back button to kill app
Finally an S10+ rom, hope for an overclocked kernel!
after pressing reboot to recovery, do i press the key combo of volume up+bixby+power for magisk root?
pankajgavri said:
after pressing reboot to recovery, do i press the key combo of volume up+bixby+power for magisk root?
Click to expand...
Click to collapse
Not required, just reboot
NinoLatif said:
Finally an S10+ rom, hope for an overclocked kernel!
Click to expand...
Click to collapse
I hope too!
vegetaleb said:
Thanks for the rom! :victory:
At last a good reason for rooting my s10+ , I hope you will add more mods later like jpeg 100% in camera or long press back button to kill app
Click to expand...
Click to collapse
Yes i have actually already done the 100% camera mod, Added it to OP as it is already in the ROM . glad u like it
hamzih said:
For twrp are we able to flash gsi on S10?
Click to expand...
Click to collapse
Probably but why
ry46ana_ said:
Nice rom working everything thanks
Click to expand...
Click to collapse
glad you like it
hunted tech23 said:
it keeps saying installing kernel then it says failed?
Click to expand...
Click to collapse
Give logs, no one else has this problem and i never saw it once during my testing
dami00976 said:
Will test in a while...
So far so good really smooth and stable. I even updated magick without any problem
Click to expand...
Click to collapse
happy u like it!
is the battery ok on this rom any advantages using this than my current stock with twrp and magisk
Nice rom working everything thanks
when I turn my phone on for the setup past the wifi setup says checking for updates installing updates then screen goes black with bar down bottom cant get no further
im on may security update ase5, rom is not working for me, camera app is force closing.
can u provide asd5 firmware link please?
pankajgavri said:
im on may security update ase5, rom is not working for me, camera app is force closing.
can u provide asd5 firmware link please?
Click to expand...
Click to collapse
hi s10 or s10+? you can find asd5 firmware in your stock asd5 rom zip if u need it, i am using this with full ASE5. firmware
avid123 said:
when I turn my phone on for the setup past the wifi setup says checking for updates installing updates then screen goes black with bar down bottom cant get no further
Click to expand...
Click to collapse
Hi please reboot your phone. it should solve it, i experienced this on stock and it appears to be a Magisk issue. the new magisk 19.3 update which may be included in my next rom will fix this.
BLANEUR said:
Nice rom working everything thanks
Click to expand...
Click to collapse
glad u like it
avid123 said:
is the battery ok on this rom any advantages using this than my current stock with twrp and magisk
Click to expand...
Click to collapse
battery and speed better than stock and it has some nice mods, read the feature list..
avid123 said:
when I turn my phone on for the setup past the wifi setup says checking for updates installing updates then screen goes black with bar down bottom cant get no further
Click to expand...
Click to collapse
If you de bloated chrome our Google now it will do that
---------- Post added at 04:34 PM ---------- Previous post was at 04:30 PM ----------
I'm having issues with some apps,samsung health, tmobile, and a bank app. Samsung health shutdown after I select the terms and press next. The other apps open then close up imidietly and crash.
Also device care doesn't seem to work no matter how I flash the rom.
Edit:Also having issues with Gmail...
So if my s10+ is on ase5 I should wait for the next update of this rom?
Hello !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The new Android 10 is coming to your Huawei MediaPad M3 Lite 8/10, Qualcomm Snapdragon MSM8940 with the new LineageOS 17.1 !
Please note that this ROM is one of my side projects, for which I could provide zero warranty. By installing this ROM, you acknowledge that you take all the risks that come with installing custom firmwares on your devices, including but not limited to bricking your device, losing your data, etc.
Warning !
Installing a custom ROM on your device can sometimes be difficult and also with unwanted consequences! Therefore, make sure that you understand exactly what risks this operation entails - you are the only one responsible for all actions taken on your device.
Devices Supported:
Huawei MediaPad M3 Lite 10 :
BAH-AL00/BAH-L01/BAH-L09/BAH-W09
Huawei MediaPad M3 Lite 8 :
CPN-AL00/CPN-L0J/CPN-L09/CPN-W09
About LineageOS :
LineageOS 17.1 is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Downloads :
LineageOS-17.1-HuaweiMediaPadM3Lite_2023-02-26.zip md5 : b86f752b8851bf8a8e1ce9e2168ee92d
This ROM do not include GApps
please use always the last available pack :
OpenGApps for Android 10 ARM64
Instructions :
0. LOS 17.1 must be installed via TWRP 3.3.1-0
1. After device boot on LOS 17.1 you must to install the New TWRP 3.3.1-3
( TWRP 3.3.1-3 needed for flash GApps on LOS 17.1 )
2. plug USB cable to your Desktop/Laptop for copy files ( or add them to a external storage/microSD card )
3. go to Wipe -> Swipe to Factory Reset
4. copy LOS-17.1 ROM & GApps to Internal/External Storage
5. go to Install -> check the LOS zip file
6. Add more Zips
7. check GApps zip file
8. Swipe to confirm Flash
9. Wipe cache/dalvik -> Swipe to Wipe
10. Reboot System
11. Enjoy!
What's working :
* Touchscreen
* Audio & Video
* WIFI
* BT
* GPS
* FPS
* Lights
* Sensors
* Internal/External Storage
* ADB/MTP & USB/OTG
* RIL & data connection
* Camera Video recording
* Flip Cover
* Encrypt device
* SELinux Enforced
Not working :
* Photo Camera
* there could be also others minor issues !
Credits :
LineageOS Team
dianlujitao
LuK1337
Greg Kroah-Hartman for keep alive 3.18.y kernel !
Source Code :
device tree : android_device_huawei_bach Branch: ten!
kernel: android_kernel_huawei_bach Branch: ten !
Screenshots :
Contributors
surdu_petru
Paypal Donation : paypal.me/petrusurdu1
Source Code: https://github.com/Huawei-Dev?tab=repositories
ROM OS Version: Android 10 / Q
ROM Kernel: Linux 3.18.140
ROM Firmware Required: LineageOS 16.0 Android Pie
Based On: LineageOS
Version Information
Status: Stable
Created 2019-10-20
Last Updated 2023-02-26
Donors :
@ossizwei
@Jobode747
@Micromind
@morgan7676
@Kagum
@mrdark5555
@realdomdom
@xbor
@#marcg#
Norbert Ossendorf
Once again thank you very much to all donors !!!
Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet
I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.
Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?
thanks
Paul
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"
csjjpm said:
Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet
I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.
Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?
thanks
Paul
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"
Click to expand...
Click to collapse
Yes you can update now Twrp to 3.3.1.
Btw I didn't tested GAppps. So if it's not working just remove it.
This is happening a lot when I go into Setting: "android setup keeps stopping"
csjjpm said:
This is happening a lot when I go into Setting: "android setup keeps stopping"
Click to expand...
Click to collapse
Ok, just remove GApps and see how it's working ... later you can install nano or pico, not full version of GApps !
EDIT :
Full version of GApps it's not recommended at all as there is just a Betta LOS 17.0 !
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
oddhap said:
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
Click to expand...
Click to collapse
Well done !
oddhap said:
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
Click to expand...
Click to collapse
Thanks, I didn't know if the 'android setup' was important or not. Have disabled it and all quiet now.
I tried a few version of GAPPS10, Pico, Nano etc. and still got the errors. Once 'android setup' disabled now issues.
Thanks
Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.
fallensoldier said:
Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.
Click to expand...
Click to collapse
Thank you for feedback!
Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.
sergybizzi said:
Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.
Click to expand...
Click to collapse
Thanks for feedback ! Btw, I already noticed fingerprint issues .... but as you already said the ROM will be improved with each update !
At this time even Lineage OS didn't released the stable source yet .
@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!
sergybizzi said:
@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!
Click to expand...
Click to collapse
Sorry, no way ... I tried a few time to revert to stock but my device can't boot on stock recovery from some unknown reasons .
But there is a few users wich already reverted this device to stock after installed Lineage OS 16.0 ( Android Pie ), so you could search on Lineage16.0 thread for their posts, or you can get in touch with them through PM.
Good luck !
Ok no problem.. I'll find a way to get back to the stock .. But first I'll try the other roms with Android 9. Thank you
hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie
mrbarnie said:
hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie
Click to expand...
Click to collapse
My tablet is also LTE version . What it's not working now ? Anyway many stuff will be improved in the next updates .
great thanks a lot i thought that this update is only for the lite version, which means WIFI only.
i have BTV-DL09
Build BTV-DL09C100B311
EMUI 5.0.4
mrbarnie said:
great thanks a lot i thought that this update is only for the lite version, which means WIFI only.
Click to expand...
Click to collapse
NO, LITE version doesn't mean WIFI only !
Hi,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DarkJoker360 AOSP 10 for Huawei P10 Lite
*** Stable Version ***
About
Code:
[CENTER]Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
This rom has been edited by DarkJoker360 with some additions such as:
* Pixel UI
* Theme picker
* Fruity pebble v2.0
* AospExtended's material icons
* Google bootanimation
[/CENTER]
Working
Code:
[CENTER]* Touchscreen
* Adb / Mtp
* Audio
* Boot
* Bluethoot
* Internal/External storage
* Sensors
* Wifi
* RIL
* Camera
* Android 10 gestures
* NFC
* FP gestures
[/CENTER]
Not Working
Code:
[CENTER]* Offline charge (It works by switching to permissive selinux)
[/CENTER]
Installation
Code:
[CENTER]* you must also have this recovery version installed : [URL="https://forum.xda-developers.com/p10-lite/development/recovery-twrp-huawei-p10-lite-t3953890"]TWRP[/URL]
* go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) !
* reboot to bootloader
* extract AOSP 10 zip
* run: fastboot flash system <drag system.img here>
* reboot to TWRP
* flash root(optional)
NOTE: If you are coming from Android 9 flashing root is a MUST DO !
NOTE2: Flash only the Magisk zip linked in this post !
* reboot to System
* reboot to TWRP
* flash gapps (optional)
* reboot to System
* reboot to TWRP
* flash patch_r2.zip
NOTE: this zip is needed for having working NFC and overlays. DO NOT IGNORE IT !
* reboot system
* Enjoy !!![/CENTER]
Update
Code:
[CENTER]* extract the new update of AOSP
* reboot device to : TWRP
* wipe cache & dalvik cache
* reboot to bootloader
* run: fastboot flash system <drag system.img here>
* reboot to TWRP
* install gapps(optional)
* reboot to System
* reboot to TWRP
* install patch_r2.zip
* NOTE: this zip is needed for having a working NFC and overlays. DO NOT IGNORE IT !
* reboot to System
* Enjoy !!![/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Android-10/"]DarkJoker360 AOSP 10 and patch_r2 fix[/URL]
[URL="https://opengapps.org/"]Gapps[/URL]
[URL="https://forum.xda-developers.com/attachment.php?attachmentid=4882825&d=1574332554"]Magisk Phh v19.3[/URL][/CENTER]
Credits:
@phhusson
@flex1911
@haky 86
@Dil3mm4
@Hami_Do
Please support my work, it's very important! Thanks
DONATIONS
Regards !
XDA:DevDB Information
Android Open Source Project, ROM for the Huawei P10 Lite
Contributors
DarkJoker360
Source Code: [url]http://github.com/DarkJoker360[/URL]
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x,bootloader unlocked and TWRP
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2019-11-24
Created 2019-11-24
Last Updated 2020-01-02
FAQ.
Gapps
The recommend package at the moment is this:OpenGapps_arm64-BETA
* Flash this after first boot(with patch zip flashed) and ignore Setup Wizard errors
* Open Play Store and Log in
If you get some errors about Play Services make sure it has full permissions.
Aosp has "ugly" ui
I am sorry for giving you AOSP, hi6250 sources aren't good for other rom actually. As soon as I am able to fix these issues with other custom roms I will provide them, otherwise I will customize it starting from next build by bringing pixel styles and new apps with recent ui look.
NOTE: while inatalling gapps you can may face error 70 insufficient space error, just resize system and if the problem persist flash pico gapps !
Thanks for developer
I'm testing it right now. Flashing runs flawless. Rom runs well so far. ... More later.
First of all, I'm glad that I can use a pure aosp on this phone now. It can be used as daily driver. A cool thing is that I only needed to set device fingerprint to p8lite in magiskhideprops to fully pass safetynet. now it only needs nfc working, but I guess we need to wait for phh and his updates for now.
Two things I recognized pretty fast are GPS needs little help to get a fix, first fix needed nearly 4 minutes but then it gets fast fix but always with support (used gpstest from f-droid store) and downloads via wifi are generally (quite) slow.
Also I can't copy stuff from intern to ext sdcard.
This is not a real "bug report" as it is possible that I did something wrong, you'll never know. Just talking and see if anyone has the same issues. Cheers
Added new gapps and steps for their installation in OP and 2nd post.
NeoPreacher said:
I'm testing it right now. Flashing runs flawless. Rom runs well so far. ... More later.
First of all, I'm glad that I can use a pure aosp on this phone now. It can be used as daily driver. A cool thing is that I only needed to set device fingerprint to p8lite in magiskhideprops to fully pass safetynet. now it only needs nfc working, but I guess we need to wait for phh and his updates for now.
Two things I recognized pretty fast are GPS needs little help to get a fix, first fix needed nearly 4 minutes but then it gets fast fix but always with support (used gpstest from f-droid store) and downloads via wifi are generally (quite) slow.
Also I can't copy stuff from intern to ext sdcard.
This is not a real "bug report" as it is possible that I did something wrong, you'll never know. Just talking and see if anyone has the same issues. Cheers
Click to expand...
Click to collapse
Thanks for reviewing, I forget to include GPS stuff, in next build it will be fixed !
Nfc is almost fixed, we got it enabling at the moment.
For sd card I will take a look.
Here's a working fix to get nfc option (but no tile): https://forum.xda-developers.com/showpost.php?p=81021365&postcount=26
Q looks promising for our chipsets.
I am working on to include everything in the system.img without using another zip. Do you want gapps included too?
For this time i preferred to use .img instead of a .zip format because most of TWRPs have some flashing issues. Do you want back the zip or no? I prefer no tbh, dunno about you. Let me know
DarkJoker360 said:
I am working on to include everything in the system.img without using another zip. Do you want gapps included too?
For this time i preferred to use .img instead of a .zip format because most of TWRPs have some flashing issues. Do you want back the zip or no? I prefer no tbh, dunno about you. Let me know
Click to expand...
Click to collapse
It is a good decision to leave it as system.img, you mentioned it already, no flashing issues. Included gapps would shorten the flashing procedure a little, so I would also prefer this too.
PS: i just shared the fix to simply spread the ongoing progresses a little more. A working Q build that's now passing safetynet easily and already has working nfc (temporary with fix). That's huge progress. I'm really excited of what comes up the next weeks (not to hurry )
NeoPreacher said:
It is a good decision to leave it as system.img, you mentioned it already, no flashing issues. Included gapps would shorten the flashing procedure a little, so I would also prefer this too.
PS: i just shared the fix to simply spread the ongoing progresses a little more. A working Q build that's now passing safetynet easily and already has working nfc (temporary with fix). That's huge progress. I'm really excited of what comes up the next weeks (not to hurry )
Click to expand...
Click to collapse
Thanks so much for beliving in me, cool stuff is coming really soon. Including a newer decent ui
Great work. .. waiting for new release.
Finally oreo vendor is getting some love and a taste of android 10... Please keep up the good work man... And thank you
Does ''offline charge not working'' mean that we aren't able to charge the phone while it is turned off or when it is locked?
I installed this ROM on my Mate 10 Lite. Works awesome but i cant get GApps working from the 2nd Post. I didnt get the Option to enter the Email and Password. Settings already set. Any Ideas ?
ghassan haddad said:
Does ''offline charge not working'' mean that we aren't able to charge the phone while it is turned off or when it is locked?
Click to expand...
Click to collapse
When it's turned off it won't charge, your phone will instead completely boot up.
---------- Post added at 12:12 PM ---------- Previous post was at 12:11 PM ----------
Copkiller2010 said:
I installed this ROM on my Mate 10 Lite. Works awesome but i cant get GApps working from the 2nd Post. I didnt get the Option to enter the Email and Password. Settings already set. Any Ideas ?
Click to expand...
Click to collapse
Tried a factory reset from twrp?
NeoPreacher said:
When it's turned off it won't charge, your phone will instead completely boot up.
---------- Post added at 12:12 PM ---------- Previous post was at 12:11 PM ----------
Tried a factory reset from twrp?
Click to expand...
Click to collapse
I have a question, the charge of 9watts are working?
Hey,
I own a Huawei P10 Lite (WAS-LX1A, non-rebranded), and I followed your steps, using Askuccio's TWRP v1.0. I got it up and running, and I installed Magisk and the Android Patch, however, when I was figuring what worked and what didn't work, I took a screenshot and it said it couldn't due to storage issues, or something like that, which raised a red flag, and made me go and check how the file manager reported space, and sure enough it was reporting the +-32GB the phone had, however it was encrypted, which justified the storage issues. I did forget the GApps, which I'll install shortly to see if that was the problem. I also suspect that it can be related to the fact that I set the PIN without having used it to log in, so I'll reboot and test that out.
EDIT: Rebooted the device, entered pin, data is still encrypted
FranckTheMiner said:
Hey,
I own a Huawei P10 Lite (WAS-LX1A, non-rebranded), and I followed your steps, using Askuccio's TWRP v1.0. I got it up and running, and I installed Magisk and the Android Patch, however, when I was figuring what worked and what didn't work, I took a screenshot and it said it couldn't due to storage issues, or something like that, which raised a red flag, and made me go and check how the file manager reported space, and sure enough it was reporting the +-32GB the phone had, however it was encrypted, which justified the storage issues. I did forget the GApps, which I'll install shortly to see if that was the problem. I also suspect that it can be related to the fact that I set the PIN without having used it to log in, so I'll reboot and test that out.
EDIT: Rebooted the device, entered pin, data is still encrypted
Click to expand...
Click to collapse
Same, add to that inability to sign in to Google Services. Were you able to sign in?
ghassan haddad said:
Same, add to that inability to sign in to Google Services. Were you able to sign in?
Click to expand...
Click to collapse
I did get to that point, however I noticed on the 9.0 ROM the internal/external storage is featured as a working feature, so @DarkJoker360 it would be pretty helpful to new users to state that the internal storage isn't working, while the external does
FranckTheMiner said:
I did get to that point, however I noticed on the 9.0 ROM the internal/external storage is featured as a working feature, so @DarkJoker360 it would be pretty helpful to new users to state that the internal storage isn't working, while the external does
Click to expand...
Click to collapse
The internal storage is working good !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Wifi
Bluetooth
Audio
USB
RIL
Encryption
Fingerprint
Broken
Camera
Notification LED
Reboot
Selinux Enforcing
Source code:
device: https://github.com/yener90/android_device_huawei_diego
device-common: https://github.com/yener90/android_device_huawei_msm8937-common
kernel: https://github.com/yener90/android_kernel_huawei_msm8937
vendor: https://github.com/yener90/proprietary_vendor_huawei
Important
If you are using this ROM first time, wipe data. Wipe data completely. I mean the option where you need to enter "yes". Use this option and then flash the rom.
This ROM only works with the TWRP I added.
If you want to use GAPPS, flash it directly after flashing ROM. Don't let the ROM boot. Otherwise your device will not get certification, so you will not have Google Access.
Instructions (thx @matshias, just changed few lines to get ROM flashing working)
Put your ROM (and GApps) onto your sdcard (sdcard must be exfat or fat32, NTFS not supported)
Install fastboot and adb on your PC, e.g. from here
Enable developer options and in there select to unlock your bootloader by enabling OEM unlock and enable USB debugging
Unlock your bootloader using this tutorial: https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code This will factory reset your device
Don't setup, cause you will need to format your phone later again. Shutdown tablet. Hold volume up and power button to start to bootloader
Then run
Code:
fastboot flash recovery twrp-3.3.1-0-<your-filename>.img
to flash TWRP
Select with volume buttons "Recovery Mode" and press power button
Select to write to system, otherwise you can't flash ROM
Backup at least system and boot partitions to your sdcard cause you will wipe data in next step. Choose "System Image" for the system partition backup.
Format data using this tutorial
Flash ROM
Optionally flash SuperSU or Magisk in TWRP which should install system less. Keep OEM unlock enabled if you flash or modify anything
Restart
Download
2020-02-09
• added support for all variants of diego
• updated Lineage
ROM
TWRP
Older downloads
2020-01-24
• fixed Speaker Volume Fluctuation
ROM
TWRP
2020-01-22
• added FT5346 touchscreen support
ROM
TWRP
2020-01-18
• initial release
ROM
TWRP
XDA:DevDB Information
Lineage 16 for Nova Smart Honor 6C Enjoy 6s, ROM for the Honor 6, Honor 6 Plus
Contributors
yener90
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Testing
Created 2020-01-18
Last Updated 2020-01-18
my device is h60-12, should i flash marshmellow stock firmware first before flashing this rom?
Wow thanks for sharing this ROM.
Exzellent Work. Thank you!
I flashed it.
Amazing for the first build.
Let's hope that the rest can be fixed.
I also found another bug, the flashlight is broken.
Magisk 20.3 works fine with pass SafetyNet.
Thanks a lot for the ROM!
I love it!
Taswim said:
my device is h60-12, should i flash marshmellow stock firmware first before flashing this rom?
Click to expand...
Click to collapse
This is for Diego only, your device is not supported.
jamal2367 said:
I flashed it.
Amazing for the first build.
Let's hope that the rest can be fixed.
I also found another bug, the flashlight is broken.
Magisk 20.3 works fine with pass SafetyNet.
Thanks a lot for the ROM!
I love it!
Click to expand...
Click to collapse
I tried long time ago fixing those issues with good help, couldn't manage it.
Thank you @yener90 for update this rom.
The problem is, AFH found no mirrors to download the newest update :/
@jamal2367 use latest version
Update
2020-01-24
• fixed speaker volume fluctuation
ROM
TWRP
yener90 said:
@jamal2367 use latest version
Update
2020-01-24
• fixed speaker volume fluctuation
ROM
TWRP
Click to expand...
Click to collapse
Thank you!
Audio works fine now!
And my Touchscreen is now.
Smoother Scrolling + Ghosting Effect is gone.
Nice Job, wow!
@yener90 This ROM isn't for Honor 6 , please post to the right forum!
Good!
Everything is set! The firmware is quite stable, nothing is buggy, everything works well. I hope that this version of the firmware on the Honor 6C will not be abandoned and you will make a working camera. I wish you success in your development!
i flashed twrp and i got blackscreen when i try to reboot to recovery and system, i have a nova smart DIG-L21 (not HN but it shouldnt matter because its the same thing) 16GB/2GB, no idea whats happening
rebooting to recovery from system with adb reboot recovery results a blackscreen, then rebooting to bootloader and doing fastboot reboot results a reboot to "your phone is unlocked" screen and going to that black screen again, rebooting to erecovery and clicking reboot from there works and reboots to system after the your phone is unlocked screen
edit: so i just saw what was the device getting reconized as when i do "adb reboot recovery" and, well: Qualcomm HS-USB Diagnostics 900E, from there only blackscreen, i can hold power button and vol down to reboot to bootloader, from there:
1. if i do fastboot reboot i will reboot, see that your device is unlocked screen for a second and go in that blackscreen again
2. hold power and vol up to reboot in erecovery and click reboot, after that i pass the device is unlocked screen and go to emui
another edit: fastboot boot twrp_3.3.1.0_blabla.img is stuck on booting...
Update
2020-02-09
• added support for all variants of diego
• updated Lineage
ROM
TWRP
Thank you for the update
Edit:
update works perfectly.
I think i have fixed the reboot issues
I discharged my phone to 0% and skipped two days.
After that I charged it to 100% and since then the reboot function is working now.
Sorry, but I'm a bit confused.
Is this rom suitable for Honor 6 Plus PE-TL10 too?
tnx
No.
I was really thrilled to see that there is a new ROM for the 6C, great to see that.
One question though:
yener90 said:
Broken
Camera
Notification LED
Reboot
Click to expand...
Click to collapse
Does "Broken" mean that the three features don't work at all or do they somehow work with bugs?
I'd really like to update my phone but no working camera at all would be quite a problem.
Fix the camera please
Did someone manage to fix the camera? If so, how? I tried to fix it myself - bootloop
this rom dosen't work on my enjoy6s (DIG-AL00)
this rom work on my enjoy6s (DIG-TL10)，but,can you fix the camera?
tototjc said:
this rom dosen't work on my enjoy6s (DIG-AL00)
Click to expand...
Click to collapse
It's work on my DIG-AL00(Enjoy 6S). You shouldn't flash SuperSU after you flashed the system. Just LineageOS + OpenGapps is fine. Wait for a while and you can enjoy it.
I have noticed that the Notification LED will turn on (Yellow colored, never appears on EMUI) some times when I plugging in the charging, but not stable, only flashes for a few times. And my Reboot function is working normally too, but my fingerprint is broken. This is unlike @yener90 's description.
Interesting, right？