Develop Bugs

[ROOT][TWRP] Micromax A91 Ninja/ Cherry mobile thunder (Root only)

How to root Micromax A91 Ninja/ Cherry mobile thunder :
The phone (Micromax A91 Ninja/ Cherry mobile thunder) can be rooted with the bin4ry tool.
1.Enable USB Debugging. This is critically important.(go to Settings and then to Developer options.)
2.Install drivers for your phone using pdanet
3.Download Bin4ry's rooting tool from here
4.Extract the file you downloaded in the previous step. Right click on the RunMe.bat batch file and select Run as Administrator.
5.Connect your phone to the PC using USB cable.
6.In the RunMe.bat command window, follow the simple instructions that are given to you. First off you are supposed to enter a "1".
7.Later during the process, you will be asked to tap a restore button. You have to do that on your device, a popup for that will appear at the right time. Your phone will reboot a few times during the process.
8.When the process completes, a congratulatory message will appear on the command prompt screen.:victory:
Rooting voids your warranty do these steps after getting a clear information about Rooting!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to install TWRP(Team Win Recovery Project) - Micromax A91 Ninja only :
1. Download TWRP Recovery v2.4.2.0 extract it and copy recovery.img only to root of your SD Cards.
2. Download MobileUncleTools for MTK and install it.
3. Now open MobileUncleTools.
4. Give Superuser permissions.
5. Click on recovery update menu.
6. Then click on the recovery image name of ‘recovery.img’.
7. Dialog box opens (Are sure flash recovery) and tap OK.
8. Reboot into recovery mode using volume up + power key after power off.
9. Hurray! you have installed TWRP recovery on your Micromax A91 Ninja.
Credits:
Varun Chitre
yuweng
Cygwin

SPFlashtool is the BEST
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...

droid man said:
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...
Click to expand...
Click to collapse
this method can be done also using sp flash tools my friend. but the main problem of sp flash tools is if noobs flash wrong preloader or mess up with tool it may result in a brick...

droid man said:
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...
Click to expand...
Click to collapse
give ur custom rom of ninja a91.

Yureka downgrade lollipop 5.0 to kitkat 4.4.4

Hello Members, I am about to share the final method for downgrading Yureka Lollipop to Kitkat Stock Rom.
You need to download these files
1. CM11 FASTBOOT SIGNED.ZIP DOWNLOAD LINK: http://builds.cyngn.com/factory/tomato/cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
2. FASTBOOT DRIVERS DOWNLOAD LINK: https://drive.google.com/file/d/0B0_IwOvcRE4gWkpiRTBlenJoR1k/view?usp=sharing
3.LIST OF COMMANDS AND BAT FILE INCLUDED DOWNLOAD LINK: https://drive.google.com/file/d/0B0_IwOvcRE4gODk4R09GTDVVWW8/view?usp=sharing
You can enter each commands step by step or click on the bat file. But don't prefer the bat file procedure, you may get errors. I'm not responsible for any hard brick. try with on own risk.
Procedure:
1. Download these above files
2. Create a Folder name it as "Flash".
3. Extract CM11 Fastboot Signed and Fastboot Zips in that "Flash" Folder which you have just created.
4. Open the Folder and CLICK on the SHIFT button and right clicked on the mouse. You can see the "Open Command Window Here".
5. Clicking on " Open Command Window from here" will open a command window.
6. Switch off your yureka and press volume plus button and connect to the computer.
7. You will see the phone has been started in Fastboot Mode.
8. Now, You need to enter the given commands one bye one or just click on FLASH_ALL.bat file, which will flash everything easily.
9. Final step is to Reboot in Normal Mode.
10. You will be in KITKAT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For more detail, I have uploaded a video in youtube. Please watch it. If I Helped you then please HIT THANKS.

fastboot
I am unable to set in fastboot device...
I tried a lot..can you please tell me the process of fastbooting the device

after done that procedure am i able to flash any custom rom based on cm 11 ?
after done that procedure am i able to flash any custom rom based on cm 11 ? or i have to rerooted my phone again ? plz send me rply bcoz i m going to downgrade to kitkat from buggy lollypop .

[SCORE] InnJoo One 4G HD AnTuTu Benchmark

Hi Guys,
Just want to share my InnJoo One 4G HD AnTuTu Benchmark Results
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit:
ROM and Recoveries
Download here

how did you root Innjoo one hd 4g?

Root by using Smart Phone Flash Tools (SPFT)
khatriraza said:
how did you root Innjoo one hd 4g?
Click to expand...
Click to collapse
Please follow these steps:
Step 1. In the google drive link that I provided, download the following files: boot.img, recovery.img and MT6752_Android_scatter.txt.
Step 2. If you haven't yet downloaded the drivers and the SP Flash Tools provided by InnJoo in their website, go here to download the PDF file with the links of Drivers and Flashing Tools. (See attached InnJoo.png)
Step 3. Download CWM flashable SuperSU zip from here and save it to you external memory card.
Step 4. Turn Off and disconnect your phone from your computer.
Step 5. Run flash_tool.exe (See attached Flash_Tools.png)
Step 6. Browse for the MT6752 Android Scatter file which you have downloaded in Step 1. Make sure that you select Download only from the combo/drop=down box and checked the boot and recovery partition on the list before clicking the Download Button. (See attached MT6752.png. Please be noted that you should click on the the Download Button before connecting your non-powered InnJoo One 4G)
Step 7. While your InnJoo One 4G is turned off, connect it to your computer. Assuming that you have installed the drivers correctly. Progress bar at the bottom for flash_tool will be seen.
Step 8. Disconnect your phone from the computer and press the power + volume-up buttons. Upon turning on, a menu will show up and ask you for options: a) RECOVERY b) FASTBOOT c) NORMAL. Note that you can move the selection arrow by pressing the volume-up button and selecting the option with the volume-down button. Select RECOVERY option and press volume-down button.
Step 9. Your InnJoo one will restart into CWM Recovery mode. Install the CWM flashable SuperSU zip in Step 3 by selecting Install Update from sdcard1.
Step 10. Reboot and you are now rooted.

Hola..no hay ninguna Rom personalizada aún para instalación con cwm?..mi teléfono innjoo 4G LTE HD ..Esta preparado para ello..

[Recovery][E9/E9+] TWRP Recovery 3.0.0-1 (UNOFFICIAL)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
E9 A53ML
https://www.androidfilehost.com/?fid=24421527759886207
E9+ A55ML
https://www.androidfilehost.com/?fid=24421527759886208
Install
View attachment ADB-Windows.rar
Code:
adb reboot download
fastboot flash recovery <filename>

For e9s nothing? A50aml.

Venozer said:
For e9s nothing? A50aml.
Click to expand...
Click to collapse
Try this, but I'm not sure it works fine or not, so test it by yourself.
https://www.androidfilehost.com/?fid=24421527759886645

cannot flash tecovery for me please help E9+ A55ML

nua69 said:
cannot flash tecovery for me please help E9+ A55ML
Click to expand...
Click to collapse
please show me the flash log.

Installation of this version was as usual, smooth as silk.
Love the newly added features.
E9+ A55ML

sabpprook said:
please show me the flash log.
Click to expand...
Click to collapse
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul

nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
drag the file into terminal window instead of typing filename.

nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
1. Download the file twrp-3.0.0-1-a55ml_dtul.img from the link on Post 1.
2. Copy this file to the ADB/Fastboot folder.
3. Power Off your phone.
4. Press Power + Volume Down for 7-10 Seconds.
5. You may reach Download Mode directly , or if you reach Bootloader, use volume button to highlight Download Mode and push Power button.
6. Check at the top to make sure that bootloader is unlocked. (You cannot flash if the status says Locked or Relocked)
7. Connect your phone to computer using USB-MicroUSB cable
8. Run Command Line Window from ADB/Fastboot folder.
9. Type : fastboot flash recovery twrp-3.0.0-1-a55ml_dtul.img
That's all.

hi
when i try to backup my ROM, it brings System and System Image in the menu options.
Is it necessary to select System Image in the menu options or only System is enough ?
thx
Sent from my HTC One E9PLUS dual sim using Tapatalk

Works well on E9
Thanks again for the upload. Flashing went well, without any problems, on E9 (not plus) TW version 1.50.709.3.
:good:

What features does this have over 2.8?
Thanks

The links are not working
The link for HTC one e9s is not working.

How To Guide [EXPERIMENTAL] Nokia G10 and G20 Bootloader Unlock!

[EXPERIMENTAL] Nokia G10 and G20 Bootloader Unlock!
Please install ADB and Fastboot Drivers from here
Please proceed with caution. You are responsible for your own action!
PLEASE NOTE I PERFORMED THIS STEPS ON A NOKIA 3 TA-1032 and it worked.
Steps to unlock Bootlader:
1. Turn on Developer options by tapping build number 7 times.
2. Toggle OEM Unlocking ON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Turn on USB Debugging
4. Open CMD in your computer
5. Type adb devices and connect your device to the computer using USB cable
6. Accept the adb authorisation prompt on your Nokia Device
7. CMD will show your device serial number as shown in the picture below
8. Copy the serial number and paste it here and copy the md5 hash value
and make sure you that there's no space or other things inside
the serial number.
9. In CMD type following command
adb reboot bootloader
[then your device will boot into fastboot mode]
10. Then type following command in CMD
fastboot devices
[this is to make sure that your device still connected to pc and it will show your
device serial number]
11.Then type
fastboot oem key [KEY_OBTAINED_GENERATOR-MD5]
so the command will look like as follows
fastboot oem key 282c41d53c2c5aefaa941bbeda525ca3
12. Type
fastboot flashing unlock
then your phone will ask you about unlocking bootloader
13. then press vol up (means yes)
14. Restart your device and see if it is unlocked!

This is great. Does it also works for the Nokia g21?

baseline2016 said:
This is great. Does it also works for the Nokia g21?
Click to expand...
Click to collapse
Please try and see if it works.
I have tested this on Nokia 3.