{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.3.1 for SM-G9750/G9730/G9700
*** Not for USA carrier devices, this will only work on devices with an unlocked bootloader
Telegram thread
Built using OMNI source 9.0
TWRP v3.3.1
See post #2 for install steps
Changelog...
v1
Initial build
MTP, OTG and SDcard all working
Encryption not working, but being implemented later
v2
Added N9700 support
Updated kernel to SI3
v3
Fixed img flashing
v6
TWRP is now official
Magisk patches are no longer included, patch yourself
Added dtbo img
v7
Fixed recovery_dtbo
Encryption support added
TWRP Downloads
Download TWRP 3.3.1 folder
Telegram thread
Official TWRP tree G9750
Official TWRP tree G9730
Official TWRP tree G9700
Thanks to @geiti94 and @klabit87 for allowing me to constantly pick their brains
--------------------->
Beer fund
XDA:DevDB Information
TWRP Galaxy s10, Kernel for the Samsung Galaxy S10+
Contributors
Mentalmuso, mentalmuso
Source Code: [url]https://github.com/mentalmuso/android_kernel_samsung_beyondq
Kernel Special Features:
Version Information
Status: Stable
Created 2019-10-09
Last Updated 2019-10-09
Installation
* Unlock bootloader first
* Reboot recovery and reboot system now behave normally after flashing.
* No more patching in Magisk manager at all.
* Be aware, first clean boot, hangs on building cache, hard reboot after waiting about 3min and you'll boot past this
* If simply updating your existing TWRP, v9 upwards, you only need to flash the TWRP.img in recovery. No need to reflash kernel and Magisk.
Process from bone stock
1. Flash TWRP.tar in Odin
2. Reboot directly into TWRP
3. Format data, reboot recovery
4. Flash kernel
5. Flash encryption disabler if desired.
6. Unmount system, Flash Magisk 19.4 (not 20.*)
7. Reboot system
Process from existing TWRP
1. Flash TWRP.img to recovery
2. Reboot recovery
3. Flash Kernel zip
4. Unmount system and Flash Magisk zip
5. Reboot system
--->
i want to test for sm g9730 , i join your telegram
edit: i confirm test build for sm g9730 working, bravo
For a second thought this was tgy version lol or is it?
Can someone confirm?
There's no F in the title
Edit : oh sht this is for snapdragon
Gonna flash now
tested working on TGY s10+ latest patch
Thanks man
we can now have twrp without the chinese rom.
woot woot
will donate soon
Don't update to Magisk 20.0, there are issues with it on Qualcomm devices.
Mentalmuso said:
Don't update to Magisk 20.0, there are issues with it on Qualcomm devices.
Click to expand...
Click to collapse
also seems debloat anything will get you boot bootloop
can't delete Bixby or ms crap
@Mentalmuso Thanks so much for this. I have it all setup and it appears to be working fine on the 9730.
One question though, my OEM unlock is unlocked in the dev options, however it appears to not be greyed out. I'm a bit afraid to reboot I'm not sure if vaultkeeper will jump back on.
What does it not being greyed out imply?
Fznwolf said:
@Mentalmuso Thanks so much for this. I have it all setup and it appears to be working fine on the 9730.
One question though, my OEM unlock is unlocked in the dev options, however it appears to not be greyed out. I'm a bit afraid to reboot I'm not sure if vaultkeeper will jump back on.
What does it not being greyed out imply?
Click to expand...
Click to collapse
I'm not sure, though I encountered this also, rebooted and all is fine. I'll do some research.
Mind posting this to the s10 or s10e threads? I think there's a lot of people looking for this that don't visit the + forums.
I'm trying to refer a few people over here.
Fznwolf said:
Mind posting this to the s10 or s10e threads? I think there's a lot of people looking for this that don't visit the + forums.
I'm trying to refer a few people over here.
Click to expand...
Click to collapse
Its [G97*0] in the OP's thread name. So it is for every s10 version. People just have to look
FlatOutRU said:
Its [G97*0] in the OP's thread name. So it is for every s10 version. People just have to look
Click to expand...
Click to collapse
Lol I understand that, I'm trying to help people though.
5. Reboot system, (remember you have to hold volume down, and bix button briefly to boot rooted)
Why vol down key? Mayby start with root press vol up-bixby-power???
Fznwolf said:
Mind posting this to the s10 or s10e threads? I think there's a lot of people looking for this that don't visit the + forums.
I'm trying to refer a few people over here.
Click to expand...
Click to collapse
I don't really want duplicate threads but I'll report to moderator to see if it can be linked
Mason76 said:
5. Reboot system, (remember you have to hold volume down, and bix button briefly to boot rooted)
Why vol down key? Mayby start with root press vol up-bixby-power???
Click to expand...
Click to collapse
Typo
After installation in TVRP, such names came out, after the wipe the date did not understand anything, how to fix it?
Mason76 said:
After installation in TVRP, such names came out, after the wipe the date did not understand anything, how to fix it?
Click to expand...
Click to collapse
I don't understand the question sorry
Mentalmuso said:
I don't understand the question sorry
Click to expand...
Click to collapse
RootExplorer dont correct work
---------- Post added at 09:32 PM ---------- Previous post was at 08:59 PM ----------
Mentalmuso said:
I don't understand the question sorry
Click to expand...
Click to collapse
I can’t edit files in the system, do not create folders, do not change names, etc.
Mentalmuso said:
I don't understand the question sorry
Click to expand...
Click to collapse
magisk in you mod twrp and kernel is 19.4-this is verry buggy version
can you add version 19.3 in you mod?
i flash back my copy patched ap file magisks 19.3 on pc and root explorer work perfect...
Mason76 said:
RootExplorer dont correct work
---------- Post added at 09:32 PM ---------- Previous post was at 08:59 PM ----------
I can’t edit files in the system, do not create folders, do not change names, etc.
Click to expand...
Click to collapse
That's not a TWRP related question
Related
Unofficial release -TWRP recovery for the Galaxy J7 Pro - SM-J730F/G/GM, EXYNOS 7870
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.2.1-0 Released
Dec 9, 2017
TWRP 3.2.1-0 is out now for most currently supported devices.
What's new in 3.2.1-0:
* minui fixes (cryptomilk)
* Better android-8.0 compatibility in ROM trees (Dees_Troy)
* Fix missing library in android-8.0 (nkk71)
* Fix inconsistent SDCard naming (DevUt)
* Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
Update 16/3/2018
TWRP 3.2.1-1 build released.
Current status: BETA
Features:
MTP working
ADB working
SEANDROID warning fix
TWRP and Kernel built from latest source
Raw SYSTEM image backup
NTFS support
F2FS support >> To be added
Twrp app support
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Flash with odin in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
FAILURE TO FOLLOW THE ABOVE STEPS WILL RESULT IN TWRP BEING REPLACED BY STOCK RECOVERY
NOTE: ON SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOAD:
twrp_3.2.1-1_j730gm_16318
To Root:
Flash the latest Magisk release with TWRP:
[https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445]
To disable forced encryption and mount internal storage (/DATA):
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install Magisk
6. Reboot
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
DONATE ME HERE IF YOU WANT TO BUY ME A BEER/COFFEE OR HIT THE THANKS BUTTON IF I HELPED YOU
Cool
Bro
But my friend just made a build yerterday
And today i saw this on xda
---------- Post added at 07:05 AM ---------- Previous post was at 07:04 AM ----------
But great again
I need to talk u can j be on telegram
Which arch are u using for compiling kernel? And pls name the defconfig ur using to compile. Needed urgently for other projects
Sent from my SM-J730GM using Tapatalk
@ashyx thank's a lot bro , now i can start to make rom for j7 2017
terroboy k9 said:
Which arch are u using for compiling kernel? And pls name the defconfig ur using to compile. Needed urgently for other projects
Click to expand...
Click to collapse
Arm64
j7y17ltem_00_defconfig
ashyx said:
Arm64
j7y17ltem_00_defconfig
Click to expand...
Click to collapse
Can u link us to ur kernel source?
Sent from my SM-J730GM using Tapatalk
terroboy k9 said:
Can u link us to ur kernel source?
Click to expand...
Click to collapse
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=Sm-j730gm
I just recently update with the August 01, 2017 security patch and it seems not working. Stuck at bootloop
Gonna revert back to stock rom and try again
Berong said:
I just recently update with the August 01, 2017 security patch and it seems not working. Stuck at bootloop
Gonna revert back to stock rom and try again
Click to expand...
Click to collapse
It's built with latest source and ramdisk.
thnx alott for your effort working perfect...
Its owsome but
All is stable
It must be in official list @ashyx
---------- Post added at 06:36 PM ---------- Previous post was at 06:17 PM ----------
[/COLOR @ashyx need its sources can u upload twrp sources
Need it ....
Oves786 said:
Its owsome but
All is stable
It must be in official list @ashyx
---------- Post added at 06:36 PM ---------- Previous post was at 06:17 PM ----------
[/COLOR @ashyx need its sources can u upload twrp sources
Need it ....
Click to expand...
Click to collapse
The sources are no good for anything but compiling TWRP.
Can we still push OTA even if TWRP is installed?
If not, do we still have to go back ab initio?
ashyx said:
The sources are no good for anything but compiling TWRP.
Click to expand...
Click to collapse
Yu for.that but i need it
Fast plzzz bro
@ashyx
OR rather than it can u simply fix the sd mount bug on j7 prime @ashyx
@ashyx
confirmed... it work for the new security patch update AUG 17 2017
Great work
Oves786 said:
Yu for.that but i need it
Fast plzzz bro
@ashyx
OR rather than it can u simply fix the sd mount bug on j7 prime @ashyx
Click to expand...
Click to collapse
Link to thread please?
ashyx said:
Link to thread please?
Click to expand...
Click to collapse
Take it
https://forum.xda-developers.com/galaxy-j7/how-to/guide-root-galaxy-j7-prime-twrp-t3503926
All works but sd mount bug
@ashyx
I noticed it after TWRP Flashed
1. Lock screen pattern, pin, password a bit delayed/ take some time to unlock
2. The USB-OTG in TWRP is not working
Just saying...
Oves786 said:
Take it
https://forum.xda-developers.com/galaxy-j7/how-to/guide-root-galaxy-j7-prime-twrp-t3503926
All works but sd mount bug
@ashyx
Click to expand...
Click to collapse
I have already tried to fix this. Seems it's an issue with the kernel. You asked in this thread.
https://forum.xda-developers.com/ga...y-twrp-3-1-1-1-galaxy-j7-prime-t3617377/page7
ashyx said:
I have already tried to fix this. Seems it's an issue with the kernel. You asked in this thread.
https://forum.xda-developers.com/ga...y-twrp-3-1-1-1-galaxy-j7-prime-t3617377/page7
Click to expand...
Click to collapse
Ok but can u fix it
Or.port from here
Maybe...
Team Win Recovery Project 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: S10(Exynos variants - G970/973/975/F/N)
Download
Sources:
TWRP Tree and kernel source
Changelog:
15.12.2019
- Updated TWRP for Android 10.0
- From now on no more Magisk Prepatched images (if you need it patch it byself or flash my kernel where patched recovery is not needed)
07.10.2019
-Updated TWRP Kernel to Full ASIG Base
-Dex On PC will now work
23.09.2019
-Updated TWRP for boot on ASIG Bootloader and for not Break Camera on ASIG
-Dex On PC will not work for the moment but i will fix that soon
-Use ASIG TWRP Builds only when you are on a ASIG rom
22.09.2019
-Reverted MTP Changes from last build since for some mtp dont worked in system
21.09.2019
- Fixed the bug that mtp dont worked anymore on TWRP when usb cable got disconnected and reconnected
- Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
- Reverted FFS MTP changes since new way is more stable
- Fixed format data issue (was my fault)
14.09.2019
- Rebased Kernel to ASH6 base
- Added Busybox to twrp because enought devs asked me that since toybox is too limited
- Fixed all Bugs from initial release
- Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
14.04.2019
- Initial Release
Bugs:
-No one
Telegram Group
https://t.me/twrp_n10
Note that after flashing this twrp other build not made by me will have lockscreen unlock issues
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][ASIG] TWRP for Galaxy S10e/S10/S10+, Kernel for the Samsung Galaxy S10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 4.0
Stable Release Date: 2019-09-23
Created 2019-04-07
Last Updated 2019-12-15
Installation Guide
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp
flash the disabler that is on TWRP download link
flash my kernel avaiable here
press reboot to system in twrp.
Thank you!
Thank you!Thank you!
If I'm already rooted with Magisk do I still need to perform factory reset and so after installing the tar file?
jimbo77 said:
If I'm already rooted with Magisk do I still need to perform factory reset and so after installing the tar file?
Click to expand...
Click to collapse
yes because you have data encryption enabled and twrp dont have support for it
geiti94 said:
yes because you have data encryption enabled and twrp dont have support for it
Click to expand...
Click to collapse
Alright will give it a go. I'm just gonna backup my stuff
jimbo77 said:
Alright will give it a go. I'm just gonna backup my stuff
Click to expand...
Click to collapse
Anyone know if you could just decript it then flash?
Is it working?
reboot system...bootlop logo.
Does this include the ATT US galaxy s10???
---------- Post added at 07:57 AM ---------- Previous post was at 07:46 AM ----------
3dLyric said:
Does this include the SM-G973U
Click to expand...
Click to collapse
3dLyric said:
Does this include the ATT US galaxy s10???
---------- Post added at 07:57 AM ---------- Previous post was at 07:46 AM ----------
3dLyric said:
Does this include the SM-G973U
Click to expand...
Click to collapse
Only exynos will work for now, us snapdragon have locker bootloader, maybe never will have twrp.
Click to expand...
Click to collapse
help cannot bootphone into twrp or downlodmode tried three button combination no sucssees only phone blinks in coution messege
saxena1 said:
help cannot bootphone into twrp or downlodmode tried three button combination no sucssees only phone blinks in coution messege
Click to expand...
Click to collapse
Attach your phone to a computer and retry, it's a known issue
delete
bon0123456789 said:
reboot system...bootlop logo.
Click to expand...
Click to collapse
Have you tried doing reboot recovery from TWRP?
In the OP, it says ASC firmware base. Does that mean it only works on devices with ASC firmware base? If so how do I check that?
geiti94 said:
yes because you have data encryption enabled and twrp dont have support for it
Click to expand...
Click to collapse
I disabled encryption when installed Magisk.
Still need factory reset?
Ndaoud360 said:
In the OP, it says ASC firmware base. Does that mean it only works on devices with ASC firmware base? If so how do I check that?
Click to expand...
Click to collapse
Hi
I think he's talking about the last
First was ASBA and last is ASCA ^^
Step 9. hold vol up+ bixby+power until you are twrp, doesnt work for me. I have tried holding the buttons for more than 1 minute, holding vol up + bixby plugging usb, holding vol up and bixby only, it just stays on download mode. I can only press vol down + power to reboot, and I cant boot to system or recovery after that, I have to flash stock with odin and start over.
Any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not responsible for whatever damage this could possibly cause to your device.
Updated with latest Havoc release : 28/01/20
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/development/recovery-twrp-galaxy-a50-t3916199
Rom GSI download link : https://sourceforge.net/projects/ex...-OS-v3.1-20200111-ARM64AB-GSI.img.xz/download
Please download this file and don’t download last havoc 3.1 release because it should no work.
Thanks to ExpressLukeGSI, phh, havoc for this project.
1. Format Data + Wipe all
2. Power Off + Go back to Recovery TWRP
3. Flash System img
4. Power Off + Go back to Recovery TWRP
5. Resize the system partition, in TWRP go to
Wipe Advanced Wipe Select System Repair or change file system Resize file system
6. Flash these gapps : https://easyupload.io/llnivj
7. Then mount vendor + system and flash this fix in TWRP : https://easyupload.io/8se2a7 (It will fix overlay and dualsim)
Issue knowed :
Fingerprint doesn't work
MPT not working
ROM OS Version: 10 Q
Security patch : January 2020
ROM Firmware Required: TWRP Recovery
Version Information
Status: Stable GSI
Last Updated 2020-01-28
Eek, it's finally happening, Testing this asap... just cause I can why the hell not
---------- Post added at 06:58 AM ---------- Previous post was at 06:29 AM ----------
Installed and up and running. Tested on FN variant
Voniaak said:
I'm not responsible for whatever damage this could possibly cause to your device.
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/how-to/[email protected] meliohe
Rom GSI download link : https://bit.ly/2m9Wk3y
Official Thread : https://forum.xda-developers.com/pr...bled-device-development/gsi-havoc-os-t3930030
Thanks to Vincent, phh, havoc for this project.
Guide :
1. Wipe all
2. Flash System img + Flash DM
3. Power Off
4. Go back to Recovery TWRP
5. Resize system
6. Flash these gapps : https://filebin.net/9hgskxxbr7hdi27r/open_gapps-arm64-9.0-pico-20190126.zip?t=2z9sttui or https://drive.google.com/file/d/1nS2z4emxHovZ0x3CqXl59r8oBqx9DiPU/view
7. Delete bootanimation from TWRP in System/System/Media/Bootanimation.zip
8. Power Off wait 2 reboot and its done
Issue knowed :
Fingerprint doesn't work
Magisk does'nt work
Instead of these issue it's okay !
Many thanks to @muhamet for give me video and guide
Click to expand...
Click to collapse
Nice job my frend
Fyi, another issue for the list:
Dual Sim is not working
Add issues : Changing default USB configuration reboots phone
Brightness bar is buggy AF
sound is lesser than stock
However , nice to see projects for our device .
Thumbs up !
O thank you, sound is ok for me!
And battery life better on havoc than one ui
Voniaak said:
O thank you, sound is ok for me!
And battery life better on havoc than one ui
Click to expand...
Click to collapse
Yes it is better
Also, Magisk is working for me
I flashed the zip with TWRP and when powering the phone on I was holding down the volume up and power and let go of both immediately when the screen turns on.
So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.
Agil1ty said:
So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.
Click to expand...
Click to collapse
No issues
So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?
Agil1ty said:
So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?
Click to expand...
Click to collapse
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.
Ain't able to flash
Hello everyone. One quick question.
When I try to install the ROM image in TWRP, the device will restart on it's on. Any ideas of what the problem could be?
I tried to reistall samsungs firmware, reistall TWRP recovery and retry to intall the ROM but no luck.
Thnaks in advance for the replies...
Cheers,
F
AjayL13601 said:
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.
Click to expand...
Click to collapse
Thank you, this really helped. FInally got it to install. However, sometimes after using some apps the phone becomes really slow and sluggish (most noticable after using video apps, like youtube). Does anyone else also see this behaviour? I had to reboot the phone to get back to normal.
So far i really like the rom, everything I use works (bluetooth, hotspot, wifi, 4g, camera).
Has this ROM been modified specifically to work with our device or is it stock project treble?
AjayL13601 said:
Has this ROM been modified specifically to work with our device or is it stock project treble?[/QUOTE
Project treble
Click to expand...
Click to collapse
Huhhh, interesting, in that case I'm gonna try some other project treble roms
AjayL13601 said:
Huhhh, interesting, in that case I'm gonna try some other project treble roms
Click to expand...
Click to collapse
Not all treble ROMs working. Try PE working
Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!
Voniaak said:
Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!
Click to expand...
Click to collapse
How to update?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom V9.7
Based on Android 12 - G97xFXXSGHWC1
Devices Supported: G970F(D), G973F(D), G975F(D)
ROM Features
<*>Aroma choices: full/dirty wipe, debloat, Bixby key remapping, Emoji</*>
<*>Supports G970F(D), G973F(D) and G975F(D)</*>
<*>Base Android 12 G975FXXSGHWC1 odex/deodex Mar 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features (camera sound menu, call recording, camera during call, etc)</*>
<*>Knox partially removed, AppLock,</*>
<*>Included the security bypass from Ian’s multidisabler</*>
<*>build.prop tweaks: call ring delay, BT passwords remember</*>
<*>Allow screenshots in secure apps</*>
<*>Reboot directly in rooted system from power menu (modded services)</*>
<*>Possibility to choose in aroma to remove the boot warning</*>
<*>Modded IncallUI with app (add Phone tile - long press for settings)</*>
<*>Latest patched twrp included in the rom zip</*>
Changelog v9.7
<*>Updated to the latest HWC1 OneUI 4.1 FW Mar 2023</*>
<*>Switched back to magisk canary - remove your actual magisk app and install magisk canary</*>
Credits
- John Wu for Magisk
- IanMacd for multidisabler
- IanMacd and Oleg for the libbluetooth fix
- Corsicanu for the TWRP
- Mr. Waehere for CRB kitchen
- WinB33 for the FontPack
- aliwaris for incallui mod
- adil192 for some shealth mods
- dutchman89 for the awesome beyond boot animation
- All people who helped me with ROM testing (Claude, Bananaman and others)
Download Links for G970F(D)/G973F(D)/G975F(D)
BR9.7 HWC1 Link
Digi Link
ALWAYS CHOOSE REBOOT TO RECOVERY AFTER FLASHING BR ROM OR WHEN REBOOTING FROM TWRP !
Dirty flash BR 9.7 over BR 9.6 is possible. You must be on at list HVJ5 FW to boot BR9.7 !!!
Installation procedure
1. You need to be already on Android 12 fw before attempting to flash BR 9.x
2. Flash latest TWRP (3.7.0_9-1 or newer patched with Magisk Canary or Alpha, not stable Magisk) in Odin (AP slot), reboot the phone in TWRP using combo keys and the USB cable connected to phone and PC
3. Wipe your data in TWRP (type YES when asked), flash Ian’s latest multidisabler (v3.1 or newer) to disable the encryption at the next reboot then flash BR 9.x
In any of the above cases, MAKE SURE THAT YOUR DATA PARTITION IS NOT ENCRYPTED!!!
If your /data partition is encrypted, flash Ian’s latest multidisabler (v3.1 or newer) and format your data in TWRP after flashing the multidisabler (Wipe data, reply YES when asked in TWRP). Beware that your ENTIRE internal SD will be wiped.
After the first boot, when you start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup your root environment. Toggle ON the magisk hide toggle in magisk manager.
You can experiment also flashing full stock HWA3 fw + patched twrp+vbmeta with Odin using HOME_CSC to keep your data then reboot immediately in twrp and dirty flash directly BR9.x. It could work but no guarantee.
Advises
0. DON'T START FLASHING BRx WITHOUT A FULL TWRP BACKUP !!! Backup to PC your important files: documents, pics, contacts, SMS, etc.
1. Is advisable to clean flash if coming from A11. You can try to restore your previous saved data with TWRP but you can experience problems
2. If you have error 1 while flashing the ROM - usually bad ROM zip download; wipe cache + dalvik and try to flash the ROM again
3. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
Telegram chat
PayPal link
Happy flashing good people!
Odin fail
On BR6-Backup Odin, I get a stop at system.img with the notice "only official released binaries are allowed to be flashed " in red on the phone.
Thank you eternally, thank you very much for all the work and effort, I am trying to download ... greetings and blessings for the whole team.
samsung s 10e rom
---------- Post added at 07:04 AM ---------- Previous post was at 07:04 AM ----------
Devices Supported: G970F
Hello.
Can anyone please attach some screenshots? Neither this or the topic from s10 have any screenshots. Thank you.
Sent from my SM-G975F using Tapatalk
flyboy43 said:
On BR6-Backup Odin, I get a stop at system.img with the notice "only official released binaries are allowed to be flashed " in red on the phone.
Click to expand...
Click to collapse
I had this issue some time ago on Pie flashing stock FW. It can happen from various reasons: old Odin version, USB cable not original or old USB2 cable, bad download, etc.
Restart the phone in download mod and try again. Please let us know if you finally succeed.
God luck.
thank you for the rom , install procedure from stock Q ?
izmenar said:
thank you for the rom , install procedure from stock Q ?
Click to expand...
Click to collapse
You can find the instructions in OP. It specifically says "if you are already on Android Q"
Sent from my SM-G975F using Tapatalk
stuck at boot, after i enable ad blocker. can't get into twrp, have to start from scratch.
starbucks2010 said:
<*>Fixed the Samsung SmartWatch BT connection</*>
Click to expand...
Click to collapse
Hi starbucks2010, would you please share the information, what you did to fix that?
Thank you very much!
Very nice.:fingers-crossed:
Thank you? very nice?
Thanks for the beautiful Rom.
Will flash it tomorrow.
Good luck guys. I hope you'll like it.
The stock firm already magisk patched? Tks
Sent from my [device_name] using XDA-Developers Legacy app
I lost root. What should I do?
Thx mate...
downloading now
guastucci said:
I lost root. What should I do?
Click to expand...
Click to collapse
Reflash the patched TWRP.
Does GravityBox work on this rom? Anyone tried?
starbucks2010 said:
Reflash the patched TWRP.
Click to expand...
Click to collapse
Tks. Still don't work for me. So I patched all the AP file with magisk and reinstall everything. Now all is good now. Tks for the rom
Sent from my [device_name] using XDA-Developers Legacy app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S10+ G9750, G975U, G975U1 and G975W.
US/Canada bootloader unlock thread:
here
Download & Guide:
1. Unlock your bootloader.
2. Download S10+: beyond2qlte.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.- Type: multidisabler again. will see - Finished. when done.7. Go back to Wipe > Format Data > type yes.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Note:
To disable encryption manually:
You need to replace fileencryption=ice with encryptable=ice only in userdata line (maybe rest lines) in vendor/etc/fstab.qcom
To avoid stock recovery restoration manually:
Rename system/recovery-from-boot.p to recovery-from-boot.p.bak
Click to expand...
Click to collapse
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@Mentalmuso for base device tree
@ianmacd for multidisabler
@jrkruse for testing on S10+ G975U
Sources:
Kernel tree
Device tree
Changelog:
30.11.2021 - Update to TWRP 3.6.0
- Update multidisabler
10.03.2021 - Update to latest TWRP source
- Add terminal multidisabler script
- fstab cleanup.
16.02.2021 - Initial R build for Android 11
31.12.2020 - Update TWRP to 3.5.0
14.11.2020 - Initial Release
I don't want to get any hopes up, but... Does this mean root is coming for the G975W?
punishermoose said:
I don't want to get any hopes up, but... Does this mean root is coming for the G975W?
Click to expand...
Click to collapse
Once you unlock your bootloader you can flash any custom file.
PM to redirect you to the unlock section.
Your "unlock section" is a dirty shake-down. Is there a real bootloader unlock guide that you would be so kind as to direct me toward.
punishermoose said:
Your "unlock section" is a dirty shake-down. Is there a real bootloader unlock guide that you would be so kind as to direct me toward.
Click to expand...
Click to collapse
Its not my "unlock section", you can unlock bootloader only this way. unless you can find exploit to do it illegally.
And please dont spam the thread.
So this is a red herring. Cool thanks.
but how to unlock bootloader for S10+ snapdragon ? Because OEM UNLOCK hide
---------- Post added at 04:26 AM ---------- Previous post was at 04:11 AM ----------
I do not find OEM UNLOCK IN DEVELOPER MODE
Can you pm me this info as well?
afaneh92 said:
Once you unlock your bootloader you can flash any custom file.
PM to redirect you to the unlock section.
Click to expand...
Click to collapse
Thread cleaned. Please stay on topic.
Thank you
I have a G9750 1TB, can I start here when I wanted to take the first step in rooting?
When I root for the first time is this section good to start? Thank you guys
snapdrag0n01 said:
I have a G9750 1TB, can I start here when I wanted to take the first step in rooting?
When I root for the first time is this section good to start? Thank you guys
Click to expand...
Click to collapse
9750 can follow that steps to install twrp... rooting can be done with magisk
Deleted
Isn't this more than 6 months old? Tomatolei alrdy posted Rom with TWRP for G9750.
What's the difference? And which version is it?
And another question:
"The new builds support US devices unlocked before 9 november or added upon request."
Why this?
Thx
redplate said:
Isn't this more than 6 months old? Tomatolei alrdy posted Rom with TWRP for G9750.
What's the difference? And which version is it?
And another question:
"The new builds support US devices unlocked before 9 november or added upon request."
Why this?
Thx
Click to expand...
Click to collapse
HK users are not affected by the update. I have selfish reasons, I don't want some users to use mine.
You are free to use any build of TWRP posted on xda and what is suit your needs.
afaneh92 said:
HK users are not affected by the update. I have selfish reasons, I don't want some users to use mine.
You are free to use any build of TWRP posted on xda and what is suit your needs.
Click to expand...
Click to collapse
OK, nice. But
What's the difference? And which version is it?
And another question:
"The new builds support US devices unlocked before 9 november or added upon request."
Why this?
Thx
redplate said:
OK, nice. But
What's the difference? And which version is it?
And another question:
"The new builds support US devices unlocked before 9 november or added upon request."
Why this?
Thx
Click to expand...
Click to collapse
Same build. Already answered.
Hi... sir @afaneh92 ... can i install this twrp to newest rom for TGY ? (android 11)
Vuska said:
Hi... sir @afaneh92 ... can i install this twrp to newest rom for TGY ? (android 11)
Click to expand...
Click to collapse
Yes, but has backup issues on 11.
Will upload new build today for 11.
Changelog:
16.02.2021 - Initial R build for Android 11