Related
I have a Moto X 2013. It doesn't have all the fancy features of the Moto X (2014) or even the Nexus 6, but I believe it made use of its sole proximity sensor to perform a really slick implementation of Moto Display. It used the proximity sensor to identify when you are picking up the phone or when your hand is close to the phone and accordingly show the time on the screen. It also pulsated the notification on screen when there was a notification. Very responsive and efficient. Is there some app that can emulate this for the Nexus 5X? Why not use the Nexus's proximity sensor all the time like the Moto X to identify when we are picking up the phone? What is the limitation here?
litetaker said:
I have a Moto X 2013. It doesn't have all the fancy features of the Moto X (2014) or even the Nexus 6, but I believe it made use of its sole proximity sensor to perform a really slick implementation of Moto Display. It used the proximity sensor to identify when you are picking up the phone or when your hand is close to the phone and accordingly show the time on the screen. It also pulsated the notification on screen when there was a notification. Very responsive and efficient. Is there some app that can emulate this for the Nexus 5X? Why not use the Nexus's proximity sensor all the time like the Moto X to identify when we are picking up the phone? What is the limitation here?
Click to expand...
Click to collapse
since Moto X 2013 used an Amoled display. It could turn on few pixels on the screen to show you pulsated notifications and not drain the battery or heat up the device, Nexus 5x unfortunately uses a LCD screen so turning on few pixels on the screen is out of the question even if someone force the feature onto N5X it'll led to Huge battery drain + Heat up so in short ITS NOT POSSIBLE.
djkido316 said:
since Moto X 2013 used an Amoled display. It could turn on few pixels on the screen to show you pulsated notifications and not drain the battery or heat up the device, Nexus 5x unfortunately uses a LCD screen so turning on few pixels on the screen is out of the question even if someone force the feature onto N5X it'll led to Huge battery drain + Heat up so in short ITS NOT POSSIBLE.
Click to expand...
Click to collapse
The 2015 Moto X has a LCD display and functions just as the 2013 Moto X did with an AMOLED display. The '15 didn't heat up and the battery drain wasn't as bad as you would think. However, the whole display turning on was annoying and one of the reasons I turned Moto Display off and eventually sold the phone.
I wasn't even talking about '15 version. Though you answered it yourself.
djkido316 said:
since Moto X 2013 used an Amoled display. It could turn on few pixels on the screen to show you pulsated notifications and not drain the battery or heat up the device, Nexus 5x unfortunately uses a LCD screen so turning on few pixels on the screen is out of the question even if someone force the feature onto N5X it'll led to Huge battery drain + Heat up so in short ITS NOT POSSIBLE.
Click to expand...
Click to collapse
That does not answer my question. I am fully aware that due to the LCD screen, it cannot just turn on some pixels. But, what I want is an app that can use the proximity sensor to identify when we are using the phone or picking up the phone and then turn the screen on for displaying the notification. That should be doable right?
djkido316 said:
I wasn't even talking about '15 version. Though you answered it yourself.
Click to expand...
Click to collapse
You suggested that the 5X would heat up and it would kill the battery because of the screen tech. You are wrong. The 2015 moto x is the proof. RIF, princess.
Sent from my Nexus 5X using Tapatalk
litetaker said:
I have a Moto X 2013. It doesn't have all the fancy features of the Moto X (2014) or even the Nexus 6, but I believe it made use of its sole proximity sensor to perform a really slick implementation of Moto Display. It used the proximity sensor to identify when you are picking up the phone or when your hand is close to the phone and accordingly show the time on the screen. It also pulsated the notification on screen when there was a notification. Very responsive and efficient. Is there some app that can emulate this for the Nexus 5X? Why not use the Nexus's proximity sensor all the time like the Moto X to identify when we are picking up the phone? What is the limitation here?
Click to expand...
Click to collapse
You might want to take a look at Gravity Screen, from the Play Store.
I use Dynamic Notifications on my old GNex that I have lying around. It works pretty much like the moto x's active display. There are options to have it sense when its pulled out of your pocket or picked up off a table, but I don't remember if those are only in the full version or the free one as well.
mic_he said:
You might want to take a look at Gravity Screen, from the Play Store.
Click to expand...
Click to collapse
Thanks, I tried it and seems to work. But also, it seems to be a little aggressive with the turning the display off thing that my display seems to turn off very very quickly even when I am using it.
MurdocZero said:
I use Dynamic Notifications on my old GNex that I have lying around. It works pretty much like the moto x's active display. There are options to have it sense when its pulled out of your pocket or picked up off a table, but I don't remember if those are only in the full version or the free one as well.
Click to expand...
Click to collapse
I will try this out as well.
@PiousInquisitor I assume you haven't tried Tap2wake feature on ElementalX ? It eats alot of battery life hence heating up my device not that much but still. Do your research before you reply kid
BTW With Moto X 2014 there is something with the Display that doesn't cause it to heat up. Just like on G2,G3,G4.
djkido316 said:
@PiousInquisitor I assume you haven't tried Tap2wake feature on ElementalX ? It eats alot of battery life hence heating up my device not that much but still. Do your research before you reply kid
BTW With Moto X 2014 there is something with the Display that doesn't cause it to heat up. Just like on G2,G3,G4.
Click to expand...
Click to collapse
Tap to wake and Moto Display are two different things, tiger. Try again.
Sent from my Nexus 5X using Tapatalk
Is Ambient display like on stock marshmallow what you want then?
Lights up the screen in a sort of monochrome to display time/notifications only on lock screen when you pick up the phone.
"AC display" app is a great substitute for moto display. Combined with double tap2wake when phone is out of pocket and you're all set.
Sent from my Nexus 6 using Tapatalk
djkido316 said:
@PiousInquisitor I assume you haven't tried Tap2wake feature on ElementalX ? It eats alot of battery life hence heating up my device not that much but still. Do your research before you reply kid
BTW With Moto X 2014 there is something with the Display that doesn't cause it to heat up. Just like on G2,G3,G4.
Click to expand...
Click to collapse
It does not eat *a lot* of battery, just a tiny bit. And does not heat your device at all.
Hello all, I haven't seen this problem posted elsewhere, but I've experienced burn in problem with my Huawei watch. I've sent an email to Huawei requesting warranty repair/replacement. As some of you may recall when the watch first came out and their were issues with the "red tint" and battery life, Huawei extended the warranty on the watch to 2 years. So, I am expecting that they will honor this. Anyone else know of a problem like this or have an occassion to ask Huawei to honor that 2 year warranty?
Pro tip: warranty on any electronic device is 2 years in Europe.
Thanks, I am in the US, so I guess that doesn't help me. We'll see what Huawei says.
NeedleGames said:
Pro tip: warranty on any electronic device is 2 years in Europe.
Click to expand...
Click to collapse
swngdncr said:
Hello all, I haven't seen this problem posted elsewhere, but I've experienced burn in problem with my Huawei watch. I've sent an email to Huawei requesting warranty repair/replacement. As some of you may recall when the watch first came out and their were issues with the "red tint" and battery life, Huawei extended the warranty on the watch to 2 years. So, I am expecting that they will honor this. Anyone else know of a problem like this or have an occassion to ask Huawei to honor that 2 year warranty?
Click to expand...
Click to collapse
Yikes. You have convinced me that always on display was a bad idea.
Hope you get it replaced.
Scott said:
Yikes. You have convinced me that always on display was a bad idea.
Hope you get it replaced.
Click to expand...
Click to collapse
Well, I have my Hwatch since February with always on display turned on and there is no burn in whatsoever.
Might be an issue with his particular piece.
C3C076 said:
Well, I have my Hwatch since February with always on display turned on and there is no burn in whatsoever.
Might be an issue with his particular piece.
Click to expand...
Click to collapse
Indeed. I got my HWatch in February too and I have been using the display turned on always(when on the wrist) and have not experienced any burn in. The thing is that I made sure not to fidle with the screen wake time which is by default 5 seconds(probably for good reason) and I also made sure that every watchface that I use has Burn In Protection.
If you followed the same guidelines, then the only alternative would be that you ended up with a faulty device from the start.
Whoa first one
Sent from my SM-G935T using Tapatalk
str8spir said:
Indeed. I got my HWatch in February too and I have been using the display turned on always(when on the wrist) and have not experienced any burn in. The thing is that I made sure not to fidle with the screen wake time which is by default 5 seconds(probably for good reason) and I also made sure that every watchface that I use has Burn In Protection.
If you followed the same guidelines, then the only alternative would be that you ended up with a faulty device from the start.
Click to expand...
Click to collapse
Did you enable that in developer options? How do you know if any particular watchface has that protection?
Enviado desde mi Nexus 6P mediante Tapatalk
Juliogol said:
Did you enable that in developer options? How do you know if any particular watchface has that protection?
Enviado desde mi Nexus 6P mediante Tapatalk
Click to expand...
Click to collapse
You can read about it in the description of the watchface(Google Play or watchface client on the phone if it is a customizable one), you can also see if the watchface has shifted whilst glancing at your watch in ambient mode and waking it up by touching/press power button(it will align with the normal watchface) or better yet: leave your watch on the table on one side and film it with timelapse for a couple of minutes with your phone while having the phone in a fixed position aka not in your hand-you will see the watchface shifting.
Hope this info helps
P. S. : I don't think the the feature in developer mode actually works cuz it never stays activated for me.
str8spir said:
You can read about it in the description of the watchface(Google Play or watchface client on the phone if it is a customizable one), you can also see if the watchface has shifted whilst glancing at your watch in ambient mode and waking it up by touching/press power button(it will align with the normal watchface) or better yet: leave your watch on the table on one side and film it with timelapse for a couple of minutes with your phone while having the phone in a fixed position aka not in your hand-you will see the watchface shifting.
Hope this info helps
P. S. : I don't think the the feature in developer mode actually works cuz it never stays activated for me.
Click to expand...
Click to collapse
Thanks so much. Just noticed that shift you said when coming out of ambient mode and I didn't know what it was. Just acquired this watch coming from a Gear s2 and so far I am loving it. Thanks for the info!
Enviado desde mi Nexus 6P mediante Tapatalk
Mine just did the same thing overnight, tried factory resetting and flashing a stock image. Going to RMA mine.
Did you do like Juliogo suggested? Go to settings > about > build number. Tap on build number a bunch to enable Developer Option. Go back to settings, now at the bottom is Developer Options. Click that then the 7th option is Wear Developer Option. 3rd option down is "Force display burn-in protection". Enable that. Good luck.
Brave777 said:
Did you do like Juliogo suggested? Go to settings > about > build number. Tap on build number a bunch to enable Developer Option. Go back to settings, now at the bottom is Developer Options. Click that then the 7th option is Wear Developer Option. 3rd option down is "Force display burn-in protection". Enable that. Good luck.
Click to expand...
Click to collapse
Will this harm watch? Why was it disabled to begin with?
Shatter their dreams! and haunt their nightmares !
So it's really for watches with OLED screens. LCD doesn't really have the burn in issue. What it does if very slightly move the watch face around so the number lines are always in the same place. See a timelapse video here:
Really ?
PhoneTechShop said:
Really ?
Click to expand...
Click to collapse
Yes really. Do some investigation before you buy a Mate 20, you could have known this.
Yeah since it's LCD display,having no AOD is a real shocker
Gremio1903 said:
Yeah since it's LCD display,having no AOD is a real shocker
Click to expand...
Click to collapse
LG G7 has also a LCD display, but it has AOD. So has nothing to do with LCD
Car can also sail,it doesnt mean it's a smart idea.
Same for LCD screens and AOD.(aka keeping my screen turned on all the time draining battery like there's no tomorrow,had it on G6 with 2h of sot lol...opposing to AMOLED screens which have only few pixels turned on for AOD purposes while others are shut off thus giving almost the same battery life with AOD as without )
Gremio1903 said:
Car can also sail,it doesnt mean it's a smart idea.
Same for LCD screens and AOD.(aka keeping my screen turned on all the time draining battery like there's no tomorrow,had it on G6 with 2h of sot lol...opposing to AMOLED screens which have only few pixels turned on for AOD purposes while others are shut off thus giving almost the same battery life with AOD as without )
Click to expand...
Click to collapse
AOD is meant for people that put it on a stand or a wireless charger stand, as I do. It has nothing to do with LCD or Amoled, it is a choice :good:
No it isn't. Fact that only two LG's lowest selling phones are using it in history of lcd screens shows its a stupid choice.
And no it is not ment as a night stand **** it's ment as a permanent and advanced substitution of notification led.
99% of ppl don't use stands of any kinds and look for notifications while phone is off the charger/stand etc.
99%? Give me a link where you got this information, you made me curious
It was a figurative expression,can u give me link that AOD is meant just for stands or a wireless chargers? You made me curious.
I didn't want to go there cuz idiotic questions demant idiotic answers
Gremio1903 said:
It was a figurative expression,can u give me link that AOD is meant just for stands or a wireless chargers? You made me curious.
I didn't want to go there cuz idiotic questions demant idiotic answers
Click to expand...
Click to collapse
nvm
Pierre118 said:
Yes really. Do some investigation before you buy a Mate 20, you could have known this.
Click to expand...
Click to collapse
I already have it .. I had Honor Note 10 there was.. but I sold NOte10 because it was china version only google not supported 100%
But I didn't have always it on but there was additional ''turbo'' button for gamez but it also showed temporary always on display so I just pressed it once and showed it for 5 seconds .. I used it espec next to bed or when I woke up early ..
Hi,
Finally got my 7t on Sunday after some Amazon delays and thought I would put down some thoughts to see if others share my view of its good and bad points. I have migrated to the 7t from a Galaxy S9+ so some of the comparisons are with that as I've had it for the last 18 months.
Overall I am very pleased, construction is good, 90hz display is lovely and its snappy and smooth. I havent extensively used the camera but everything seems to work and I like the OxygenOS implementation of Android 10 however I am finding that some apps are a little behind and dont work to well. Good size, good weight and weirdly almost identical in dimensions to the S9+.
The notch hasnt been an issue and only on third charge but battery life for my useage is very good. Sound is much louder than my S9+ although not sure about better, its on par though which is fine with me.
I do have some niggle points though which maybe updated in the future and maybe its just me but would appreciate your views.
1) Haptic engine is nowhere near as strong as the S9+ and I miss the decent buzz of the vibrations on the keyboard and the feedback
2) Adaptive brightness goes too dim at night, this might just be me and my eyes but I can hardly read the screen in total darkness due to how low it goes and I have had to use Macdroid to take adaptive brightness off at night and set it to 20% so I can see the screen
3) Coming from a headphone jack I've realised cheap USB-C to 3.5mm dongles are nowhere near as good as the faithful jack. It's a shame it had to disappear.
4) Really wanted to use and try the stock launcher as I normally use Nova but the stock launcher wont go 6 icons wide, only 5. I think Nova is a little behind in Android 10 as transitions can be a little choppy but we all have our favourite homescreen setups right? and mine has to be 6 icons across.
5) Have tried using my current charging stuff and it charges the phone much slower even though my chargers are QC3.0 and cables are good. Still testing but a little disappointed that you will have to use their cables for full speed charging.
6) Really missing the notification LED and there seems to be no proper solution whereby you can keep the ambient display on and have a flashing LED style indicator so you dont have to keep tapping your phone screen
Think thats all for now. Happy to hear your thoughts but I'm all in all a happy customer. Glad I made the switch.
Thanks for reading
This is such a mature review compared to others I've read on the forums. You mention the pain points but don't go about berating OnePlus mindlessly. :good:
Anyways, I agree with most of them. Here are my thoughts:
claytow said:
1) Haptic engine is nowhere near as strong as the S9+ and I miss the decent buzz of the vibrations on the keyboard and the feedback
Click to expand...
Click to collapse
Agreed. It's not as strong as other devices. But honestly I prefer it this way.
claytow said:
2) Adaptive brightness goes too dim at night, this might just be me and my eyes but I can hardly read the screen in total darkness due to how low it goes and I have had to use Macdroid to take adaptive brightness off at night and set it to 20% so I can see the screen
Click to expand...
Click to collapse
Read the same feedback on OnePlus forums, so it's not just you or your eyes. I've always preferred adjusting brightness manually, so have turned it off.
Btw, MacroDroid rocks \m/
claytow said:
4) Really wanted to use and try the stock launcher as I normally use Nova but the stock launcher wont go 6 icons wide, only 5. I think Nova is a little behind in Android 10 as transitions can be a little choppy but we all have our favourite homescreen setups right? and mine has to be 6 icons across.
Click to expand...
Click to collapse
I don't mind the homescreen width, but the app drawer on the stock launcher lacks the option of creating folders. Nova to the rescue again!
claytow said:
5) Have tried using my current charging stuff and it charges the phone much slower even though my chargers are QC3.0 and cables are good. Still testing but a little disappointed that you will have to use their cables for full speed charging.
Click to expand...
Click to collapse
I think the adapter is more important than the cable for Warp charge. I believe you can get warp charge with OnePlus adapter and another cable.
claytow said:
6) Really missing the notification LED and there seems to be no proper solution whereby you can keep the ambient display on and have a flashing LED style indicator so you dont have to keep tapping your phone screen
Click to expand...
Click to collapse
This is what I miss the most. I have grown accustomed to the notification LED, and now it bugs me to not have it anymore.
I tried a few apps but none works the way I want them to. Still would recommend you to try "Always on Edge" as it offers many customization options and there's a lightning style called LEP which replicates the flashing LED.
If you happen to come across an app that does a better job, do let me know
Thanks enfilade,
Currently I have settled on Notify Buddy although I will try "Always on Edge" if I get tired of it. Notify Buddy seems to work pretty well, there is one thing that doesnt work correctly but has an easy workaround.
I find it works very well but you cant single tap the screen to wake while there is a notification as it uses the overlay. However you can double tap which wakes the screen and then you can use face unlock or the fingerprint. The fingerprint works fine with no notifications. This result while not perfect isnt the end of the world.
As I say though, will try Always on edge if I cant make this work long term. It would be great if OnePlus could make it an inbuilt OxygenOS facility.
Thanks enfilade,
Currently I have settled on Notify Buddy although I will try "Always on Edge" if I get tired of it. Notify Buddy seems to work pretty well, there is one thing that doesnt work correctly but has an easy workaround.
I find it works very well but you cant single tap the screen to wake while there is a notification as it uses the overlay. However you can double tap which wakes the screen and then you can use face unlock or the fingerprint. The fingerprint works fine with no notifications. This result while not perfect isnt the end of the world.
As I say though, will try Always on edge if I cant make this work long term. It would be great if OnePlus could make it an inbuilt OxygenOS facility.
I checked out NotifyBuddy. It does a good job but it lacks the option of displayed LED for charging/fully charged, which I'm looking for.
"Always on Edge" has that option but I am not completely satisfied as I also want the experience to not conflict with the Ambient display. Btw, it has multiple options for how you want to wake up, including long press and slide, so that might give you better option. Also it handles power button press in a better way.
But you need to watch an ad every time you want to save any changes you made in settings, so that's irritating, but once it's set, no ads interference in the experience.
enfilade said:
I checked out NotifyBuddy. It does a good job but it lacks the option of displayed LED for charging/fully charged, which I'm looking for.
"Always on Edge" has that option but I am not completely satisfied as I also want the experience to not conflict with the Ambient display. Btw, it has multiple options for how you want to wake up, including long press and slide, so that might give you better option. Also it handles power button press in a better way.
But you need to watch an ad every time you want to save any changes you made in settings, so that's irritating, but once it's set, no ads interference in the experience.
Click to expand...
Click to collapse
Have had a good play and not 100% sure how I can do what I want, have got it so I get icons for notifications with no flashing dot and a flashing dot while charging but its taken lots of testing and messing about. Ended up paying for it, after all its only £1.29. Happy to have any pointers or config secrets you have found to make it work properly. Thanks for the tip on what to try though.
I wish it was just a little smaller... like 10mm shorter I'd say... oh well...
claytow said:
5) Have tried using my current charging stuff and it charges the phone much slower even though my chargers are QC3.0 and cables are good. Still testing but a little disappointed that you will have to use their cables for full speed charging.
Click to expand...
Click to collapse
It's mostly due to wire gauge, which 6A should probably make the cable run hot and maybe pop (which has happened to me in other scenarios)
claytow said:
Have had a good play and not 100% sure how I can do what I want, have got it so I get icons for notifications with no flashing dot and a flashing dot while charging but its taken lots of testing and messing about. Ended up paying for it, after all its only £1.29. Happy to have any pointers or config secrets you have found to make it work properly. Thanks for the tip on what to try though.
Click to expand...
Click to collapse
I haven't been able to get it to work the "ideal" way, where I get the notification dot and the ambient display experience is not impacted. So not much I can share. In fact I didn't even know I could set flashing dot based on the scenario, so thanks for that!
enfilade said:
I haven't been able to get it to work the "ideal" way, where I get the notification dot and the ambient display experience is not impacted. So not much I can share. In fact I didn't even know I could set flashing dot based on the scenario, so thanks for that!
Click to expand...
Click to collapse
Well looks like I didnt do too well either, ran it overnight and it looks like it completely disregarded the Do not disturb times and displayed every notification overnight and used 38% of my battery. So not sure why it still displayed but looks like back to the drawing board.
Is it me or is battery life not that great?
44 minutes of SOT and down to 82%. Feels like my 6t and my XR would have more juice at this point...
pbassjunk said:
Is it me or is battery life not that great?
44 minutes of SOT and down to 82%. Feels like my 6t and my XR would have more juice at this point...
Click to expand...
Click to collapse
I agree with you on this. I'm going to try to turn off 90mhz and see how it works after that
pbassjunk said:
Is it me or is battery life not that great?
44 minutes of SOT and down to 82%. Feels like my 6t and my XR would have more juice at this point...
Click to expand...
Click to collapse
Agree. Active drain is alright with me, but standby drain is the biggest problem..
I have no problem with battery. I've got usually about 7-8 hours of SOT in 2 labor day.
My scenario: 3 google account syncing, 1 vpn mailing app syncing, bluetooth and GPS are on, no Wi-Fi coverage during 8 hour at work so I'm using there only LTE. Also I'm using a MiFit app that is syncing in the background all my notification and sending them to my smartwatch. That's all, but I'm not a gamer, I'm using a smartphone to browsing, mailing, chatting and calling. During a discharge cycle I do also an 1 hour video session on Youtube.
I'm really glad with the battery life.
Coming from a pixel 4, this phone is amazing.
The camera is way better than reviews give it credit for. Storage is blazing fast and I can actually mount my USB drive (and files copy over super fast). Battery charging is fantastic, display is brighter and nicer. The phone feels great in the hand.
I can't find one thing I don't like so far.
ChongoDroid said:
Coming from a pixel 4, this phone is amazing.
The camera is way better than reviews give it credit for. Storage is blazing fast and I can actually mount my USB drive (and files copy over super fast). Battery charging is fantastic, display is brighter and nicer. The phone feels great in the hand.
I can't find one thing I don't like so far.
Click to expand...
Click to collapse
How does screen quality and phone speed/snappiness compare to pixel 4
Cowbell_Guy said:
How does screen quality and phone speed/snappiness compare to pixel 4
Click to expand...
Click to collapse
The pixel 4 looked good but my specific model had some bad screen light leak. The OnePlus 7t is brighter and more vibrant, the animations are more pronounced since the screen is bigger. Also it's only comparable when the pixel has 90hz forced in developer settings.
claytow said:
Hi,
2) Adaptive brightness goes too dim at night, this might just be me and my eyes but I can hardly read the screen in total darkness due to how low it goes and I have had to use Macdroid to take adaptive brightness off at night and set it to 20% so I can see the screen
Click to expand...
Click to collapse
Hi, could you share your settings please?
I set it to turn off adaptive brightness at 4pm and set brightness to 40%
and
Turn adaptive brightness back on at 7am
It doesn't seem to be working - I have them both turned on.
Is this how you did it? thanks, alex
alfienoakes63 said:
Hi, could you share your settings please?
I set it to turn off adaptive brightness at 4pm and set brightness to 40%
and
Turn adaptive brightness back on at 7am
It doesn't seem to be working - I have them both turned on.
Is this how you did it? thanks, alex
Click to expand...
Click to collapse
Hopefully if I did it correct, the simple macro I did which works every day.
thanks claytow, i'll check it in the morning
Hello everyone,
I got my device some time ago and wanted to highlight the things that rarely ever get mentioned by your average youtuber.
-) Yes, vibration motor noise is there.
But it feels really intentional, not like it is broken.
For me personally I don't mind it really, just wanted to share it since this is dicussed in this forum.
I don't have the "crackling" that has been mentioned, it feels more like when you set the alarm on an iPhone and rotate the hours/minutes wheel - satisfying.
-) Screen PWM'ing
The display is great, gets decently bright especially when viewing HDR content on YT.
Also the 120Hz is definitely a game changer, you can trust me on that.
What I however noticed coming from my F1 is the PWM.
Feels like they do 240-280Hz PWMing the brightness.
I feel like it is causing me headaches and sore eyes, but might just be the exhaustion after coming home from office work on Thursday's
Will see how it develops - my F1 has also PWM, but at around 4000Hz (!) which is definitely not noticeable.
Anyone of you have noticed the PWM? I might be an isolated case, even all high-end Samsungs's have 240Hz and no one complains ...
If you know a hack to enable DC dimming just shoot me a PM please
Hope I don't have to send it back because of this, would be really a shame.
-) Green tilt
Yes, I have noticed some green tilt at the upper half of the screen.
Only happens at really low brightnesses and with certain silver/grey'ish colors in dark mode with reading mode on.
But it is really minor, you really have to focus to make out a slight green shift.
That is no issue for me really, but wanted to highlight it because of the ongoing discussin.
Actually that was all.
The rest is great so far.
Extremely fast, premium build, nice AOD, battery is good so far, camera is more than enough for me and the sound quality is excellent.
If you want to me to test/check out something just let me know, as long as it doesn't involve ADB
Motor noise?
djuroue1 said:
Motor noise?
Click to expand...
Click to collapse
The vibration motor for the haptic feedback.
GeForce66 said:
The vibration motor for the haptic feedback.
Click to expand...
Click to collapse
Ah ok.I didnt hear that.
About Dc dimming:
I have read that they had problems with it, so it might not come to the stable version but it can be enabled in the developer version.
darkb7 said:
About Dc dimming:
I have read that they had problems with it, so it might not come to the stable version but it can be enabled in the developer version.
Click to expand...
Click to collapse
Any link you can share with me? Maybe there is a chance I can give it a try.
GeForce66 said:
Any link you can share with me? Maybe there is a chance I can give it a try.
Click to expand...
Click to collapse
It was stated about the K40 on Weibo by a Xiaomi official, but since it is the same phone as Poco F3 I guess the situation is no different.
Here is a link: https://en.xiaomitoday.it/redmi-k40-poco-f3-dc-dimming.html
Yeah so I have packed it up again and will send it back to Amazon.
Unfortunately the PWM does not go along with my eyes/brain.
But other than that, great device - can definitely recommend, just make sure you are not sensitive to PWM.
When does PWM kick in according to the brightness settings?
From what I have seen as soon as you are below 100%
PWM?
_j3roen said:
PWM?
Click to expand...
Click to collapse
This should explain very well: https://www.oled-info.com/pulse-width-modulation-pwm-oled-displays
Can you please help me.. I don't know if my eyes are sensitive to pwm or not as I've always used an ips and I don't have the option of returning the phone, I used to get a headache behind my eyes while using my old pc for a long time, so does it relate to it or did you have the same problem?
Well yes, it could be - or you just were in front of the screen too long in general.
For me only my eyes start to burn when i have work in front of the pc all day, but no pain behind the eyes. This only happens with PWM'd OLEDs it seems.
What monitor have you been using with your pc?
GeForce66 said:
Well yes, it could be - or you just were in front of the screen too long in general.
For me only my eyes start to burn when i have work in front of the pc all day, but no pain behind the eyes. This only happens with PWM'd OLEDs it seems.
What monitor have you been using with your pc?
Click to expand...
Click to collapse
samsung monitor b1930n, I used to get the pain after playing for long time. I then switched to a laptop (lenovo z50-70) and the frequency of the pain decreased a lot
I couldn't really find much information. If you have the chance just point a camera at the screen when set to medium/low brightness, if you see the flicker then your screen uses PWM.
To anyone wondering about PWM in the future, notebookcheck measured it at 490Hz. This should be fine for almost anyone.
My current phone Mi 9T has 240 and I did not even know it, so I'm good. Had me scared for a bit with the headaches and whatnot
This is a great phone and I am actually impressed by its display. It's so clear to the point that I enjoyed watching cricket matches on this phone. Great sounds as well, especially for the fact that it's not expensive.
Need assistance !
I'm planning to buy this phone since I'm done with my mi 10T .
Mi 10T having 1 issue which is the only reason i will let it go . The earpiece
has the ultrasonic technology which is annoying and unstable causing a lot of calling issues since there's no a proximity sensor . Even the WhatsApp voice notes having the same issues .
I have looked around for newer phone which i think poco F3 might be the one!
I have tried to look around if xiaomi still using that stupid technology init ! But no luck.
If ur facing proximity sensor issues please confirm since my birthday is coming on sept 18th and I will gify my self a new
Thanks
If you want to change because of the proximity sensor, give the F3 a wide berth. Whether the problem can ever be solved via software is written in the stars - and it is cloudy, very cloudy... I don't think Xiaomi will ever fix this issue.