FIrst off many thanks to @vhercastillojr (as this thread is essentially his) and Chicken from the Vietnam telegram group for providing the RAW's/img's
********** DO THIS AT YOUR OWN RISK!!! I am not liable to any damage if you accidentally brick your device. This will void your warranty, if you had one. Also, using this method you won't be able to revert back to CN roms, lock your bootloader again and recieve OTAs, your device will be blacklisted by Asus ************
NOTE: To check your current fingerprint, download and install device info HW from the playstore. Under 'system' you'll find the current rom (CN or WW), the product id and fingerprint - they all need to match to be able to update your device later
NOTE 2: The main guide below skips early roms straight to last Android 9 for ROG II. For one user it didn't work and they had to use the previous, unedited guide which was based on 1910.35 RAW. If the below guide fails to update follow the additional guide at the end of this post.
----------
0) Download the ROG phone unlock tool and copy it on your phone and install it then run it. The phone will boot twice. DO NOT PRESS POWER TO STOP THE BOOT. It will wipe your data automatically. This will unlock your bootloader. EDIT: NEWER VERSION OF THE TOOL CAN BE FOUND here
NOTE: this will void your warranty, if you had one, with Asus, even if you re-lock your bootloader later... (Although, having bought mine as an import from China, I'm think the warranty only stands with the seller - in my case, 1 year, not Asus - but i may be wrong)
1) Download the WW International RAW rom from here
2) Extract the file on your PC. Boot the phone into fastboot mode (hold volume up then press and hold power button, Fastboot mode is the 1st screen you come across, the one with the options to Start, boot to recovery, etc...) connect to the side port and run "flashall_AFT.cmd" wait for it to finish and the phone will restart itself (it will take a number of minutes to complete, with the cmd window open all the time. If the cmd window only flashes up and closes down, then check the rest of the notes with this step).
NOTE: you need to remove or delete the original zip from the raw folder once extracted as it confuses the Flashall_AFT.cmd with the raw rom and zip having the same name. Also, it can help to extract to the root of C drive.
3) Download and install Minimal ADB and Fastboot app (windows). Install it on your PC to root of C drive
4) Download the rootww191064.img and place it in the Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot) from here
5) Run Minimal ADB and Fastboot by double clicking ''cmd-here.exe''. Switch the phone into fastboot mode (hold volume up then press and hold power button) then type "fastboot flash boot rootww191064.img" without quotation marks
NOTE: you can also check your device is recognised in fastboot mode by the pc/laptop by running ''fastboot devices'' cmd which should show your device serial
6) Reboot the phone and connect it to PC, copy and install Magisk and Root Explorer
Magisk
root explorer
-run magisk, (update if necessary) and grant access to root explorer (after opening root explorer you should be prompted by magisk to gain root access, click 'allow')
7) Open the Root Explorer App on you phone. Then from the app, select Mount R/W to R/O. Search for "/vendor/factory" folder and Edit the file content COUNTRY from CN to WW (ALL Capital). Scroll to "/system/etc/AsusTheme/themes" then delete the hidden file to enable the hidden themes.
8) Restart the Phone. You are done. Check again with device info HW that your fingerprint has indeed been successfully changed.
From here, if you want to be on latest Android 10, download version 2004.60 from here (full zip), place it in root of internal storage and reboot. That'll bring you to A10.
NOTE: For those of you that are rooted: Download the full zip, move to root of internal storage and reboot. System will detect and prompt to update, click update. Wait until it finishes but DON'T click 'restart', instead, click 'restart later'. Go to Magisk manager. Click 'install' for Magisk. Click the last option 'install to inactive slot after OTA'. Click confirm force flash. Reboot when prompted. Done - root kept intact.
Repeat the process for latest (currently 2012.65) using the same link above. Your phone should hopefully skip the other versions and be straight to latest. If not, you'll have to go through 2007.27, 2009.49 and finally to current latest 2012.65. Repeat the process mentioned above for keeping root if so desired
----------
For anyone still running early roms that 1910.64 won't flash directly to, use the same guide above but with the following corrections:
2) Follow the exact same instructions but using this 1910.35 RAW
4) Download root and stock boot img's and extract them to Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot)
5) Run Minimal ADB and Fastboot by double clicking ''cmd-here.exe''. Switch the phone into fastboot mode (hold volume up then press and hold power button) then type "fastboot flash boot rootww191035.img" without quotation marks
NOTE: you can also check your device is recognised in fastboot mode by the pc/laptop by running ''fastboot devices'' cmd which should show your device serial
After doing the ammended steps above for 1910.35, follow the rest of the guide to change fingerprint, then update to 1910.64 zip, place it in root of internal storage and reboot.
NOTE: For those of you that are rooted: Download the full zip, move to root of internal storage and reboot. System will detect and prompt to update, click update. Wait until it finishes but DON'T click 'restart', instead, click 'restart later'. Go to Magisk manager. Click 'install' for Magisk. Click the last option 'install to inactive slot after OTA'. Click confirm force flash. Reboot when prompted. Done - root kept intact.
******************* Thanks to @Barbatos19, who suggested I make video. Sorry to say I wont be, BUT several of you guys have recommended THIS VIDEO as a good reference guide... Hope it helps some others *******************
Finally(!!!), apologies that this post has become cluttered with instructions, I have tried to cater for all you and all eventualities!! Good luck
Thanks for this guide bro. Fully converted from CN to WW.
It wilk work if i have now flashed WW rom but with CN fingerprint? It was like this when i bought from GearBest
Zdrpkamil said:
It wilk work if i have now flashed WW rom but with CN fingerprint? It was like this when i bought from GearBest
Click to expand...
Click to collapse
Which rom version are running, if it's already 1910.35 then you can skip the flashing rom part. But if it's different, you need to follow each step
reg66 said:
Which rom version are running, if it's already 1910.35 then you can skip the flashing rom part. But if it's different, you need to follow each step
Click to expand...
Click to collapse
1906.19
Zdrpkamil said:
1906.19
Click to expand...
Click to collapse
You need to follow each step then
reg66 said:
You need to follow each step then
Click to expand...
Click to collapse
Ok, thanks. I'll do it at weekend and tell if works
what to do when the phone gets stuck on bootloop after flashing rootww191035.img and holding the power button doesnt work either?
Spawn_Ishan said:
what to do when the phone gets stuck on bootloop after flashing rootww191035.img and holding the power button doesnt work either?
Click to expand...
Click to collapse
Edit; didn't realise you were at this stage... Are you sure the flashing of the raw rom worked OK? Did you a cmd window open for a good 5-10 mins while the rom flashed?
Will KingRoot app work to root this phone? Don't want to have to wipe data to root.
I am pretty sure it won't, but humor me. Or is their something else out there that works?
jkeener88 said:
Will KingRoot app work to root this phone? Don't want to have to wipe data to root.
Click to expand...
Click to collapse
No idea... But im doubtful
hi bro
your link unlock tool its 190702..i can use it?
my rom ww1908.12 with finger CN
your file link name in step 4 is not same and file name is step 5..
its a same file to use?step 4 name boot&rootww and step 5 file ne to use rootww..do need to rename file step 4 to rootww?
and u have link l file to unroot 191035?
thx bro
wilsen1985 said:
hi bro
your link unlock tool its 190702..i can use it?
my rom ww1908.12 with finger CN
your file link name in step 4 is not same and file name is step 5..
its a same file to use?step 4 name boot&rootww and step 5 file ne to use rootww..do need to rename file step 4 to rootww?
and u have link l file to unroot 191035?
thx bro
Click to expand...
Click to collapse
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
EDIT: yes, the zip file to download in step 4 needs to be extracted. it contains both the root boot img and stock img for later on when you unroot etc (both root and stock boot img's are for 1910.35). you need to place the rootww191035.img in the same folder as adb... and do the same for the stock boot.img for later use... read the instructions carefully...
reg66 said:
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
Click to expand...
Click to collapse
i can't find link unroot 191035..
do u have thats link?
wilsen1985 said:
i can't find link unroot 191035..
do u have thats link?
Click to expand...
Click to collapse
in step 4) you download a .zip file that conatins BOTH rootww191035.img AND boot.img - the boot.img IS the stock boot for unrooting 1910.35, you need to extract both img's to adb folder on your pc.
reg66 said:
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
EDIT: yes, the zip file to download in step 4 needs to be extracted. it contains both the root boot img and stock img for later on when you unroot etc (both root and stock boot img's are for 1910.35). you need to place the rootww191035.img in the same folder as adb... and do the same for the stock boot.img for later use... read the instructions carefully...
Click to expand...
Click to collapse
oh ok thx bro
1 question again
yesterday i download file raw ww1910.35 zip on asus website
can i use its raw file to this tutor or must download raw file in page 1?
wilsen1985 said:
oh ok thx bro
1 question again
yesterday i download file raw ww1910.35 zip on asus website
can i use its raw file to this tutor or must download raw file in page 1?
Click to expand...
Click to collapse
What you downloaded is not, I think, the raw rom, its the update zip for those who have already changed fingerprint and are simply updating... Please use the links in 1st page...
reg66 said:
What you downloaded is not, I think, the raw rom, its the update zip for those who have already changed fingerprint and are simply updating... Please use the links in 1st page...
Click to expand...
Click to collapse
oh ok bro
i download raw in page 1 n when its complete i start for flash..
hope im succes for all convert
thx bro..
wilsen1985 said:
oh ok bro
i download raw in page 1 n when its complete i start for flash..
hope im succes for all convert
thx bro..
Click to expand...
Click to collapse
Good luck, make sure you read it all and follow each step accurately
reg66 said:
Good luck, make sure you read it all and follow each step accurately
Click to expand...
Click to collapse
ok bro very thx..
Related
EDIT 8/2/19: I do not own this device anymore. So i cannot and dont know if anything changed about the procedures unlocking rooting etc. BUT if you are getting any trouble i might can help you. Comment your thoughts below
Hey guy, i saw a lot of guys here wondering how to root and flash twrp recovery on thier devices . Today i am gonna show you how to do that.
First of all make sure 3 things :
1. backup your images, contacts, music tracks etc on a external SD CARD, or on your computer.
2. You MUST have the BOOTLOADER unlocked. To do that, read this guide http://en.miui.com/thread-202290-1-1.html
3.Charge your device to 80%+
HOW TO FLASH TWRP AND ROOT MI MAX
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img"
14. Your phone is now in TWRP recovery mode ( if it is not, the write on ADB: reboot recovery )
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
DOWNLOADS
1. ADB- (https://forum.xda-developers.com/showthread.php?t=2588979)
2. XIAOMI MI MAX HYDROGEN DRIVERS (http://xiaomiadvices.com/download-xiaomi-usb-drivers/)
3. TWRP RECOVERY IMAGE https://dl.twrp.me/hydrogen/ LATEST VERSION IS twrp-3.2.3-0
4. BetaSuperSu 2.74 http://www13.zippyshare.com/v/OFQGvIyA/file.html
RESERVED
The thread must be removed to XIAOMI MI MAX GUIDES, NEWS, & DISCUSSION
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
hello, please write again your problem. I can understand what do you mean.
StonebridgeGr said:
hello, please write again your problem. I can understand what do you mean.
Click to expand...
Click to collapse
Ok just two questions then, because I'm not sure what you can't understand. Please explain.
1) What Android, MIUI and kernel did you root?
2) Do you have SuperSu.zip in TWRP 3.0.3 by default? You didn't say anything in your guide about downloading it and from where + what version.
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
This twrp. Img it's for all the versions but only for mi max. Not the prime . This twrp doesn't contain superSU. If I remember correctly. But if on the TWRP contain the super su. Don't say yes. Just flash it like I saying on the guide. Maybe they upload a newest version. You can use the new. I think I put the official website . I will check it.
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
noob456 said:
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
Click to expand...
Click to collapse
LOL I forgot to add the superSU link...
That's what I told you. Then please do.
noob456 said:
That's what I told you. Then please do.
Click to expand...
Click to collapse
ok on the first post you can find all the links. if i miss something please tell me here !
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
It's compatible with mi max. You will not have any problem. Don't worry
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
Waiting to tell me if everything went fine with the installation and the flashing
Hey, tried following Your guide to install a new rom last night. Great guide for noobs like me, but it may be worth renaming the thread to something like "How to flash whatever makes You happy on to Your Mi Max". These instructions seem to work fine regardless of what's being flashed. Great job, mate!
So I finally tried it and it was successful for me as well! But I used the latest version of TWRP (3.1.0) and SuperSu (2.79-20161205). Please add a point in your tutorial to upload SuperSU.zip to the phone first, because out of emotion, I forgot... So I flashed TWRP, booted it and then... ups... no SuperSu So I wanted to reboot the phone to upload SuperSU but since only SuperSU patches dm-verity (the thing I was afraid of the most - I told you before), my phone got into boot-loop and didn't want to start. So I just uploaded SuperSU to a memory card, entered Fastboot Mode again with key-combination, plugged the cable, typed "fastboot reboot-bootloader" command and was again in TWRP to flash SuperSu from my memory card.... ufff.
So I would reedit it a bit:
0. Copy SuperSU.zip to the phone/memory card!
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img" - the phone will get disconnected from your PC automatically
14. Your phone is now in TWRP recovery mode (it takes about 30-60 seconds before FastBoot screen switches into TWRP - wait patiently)
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
Hey, I just got connected with WiFi and new MIUI 8.2.3.0 MBCMIDL wants to be installed, although the phone is rooted with bootloader unlocked. Is it safe to apply the update? Is it goona remove root so that I have to go over the process again?
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Is there anyway to root the phone without connecting it to pc?
noob456 said:
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Click to expand...
Click to collapse
Thanks for saving me the trouble.
Can someone help with a better method of applying updates?
Will downloading the zip (1.4GB approx) and flashing via TWRP help?
HwOTA7 + HwOTA8 for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware (only HwOTA8)!!!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA_WARSAW.zip
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Locked Bootloader
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
vovan1982 said:
HwOTA for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
Click to expand...
Click to collapse
Yes, I can understand you. You did the right thing, way to HwOTA as short as possible.
vovan1982 said:
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
Click to expand...
Click to collapse
so need to wait for twrp port... ok ^^
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
Click to expand...
Click to collapse
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
The greater question is: can be the bootloader locked after Oreo update ?
Eurofighter_ty said:
The greater question is: can be the bootloader locked after Oreo update ?
Click to expand...
Click to collapse
Don't know, I'm not going to try
My Bootloader is Unlocked after successful installation.
But why my PC says the prone is PRA-LX1 instead of WAS-LX1?
GizmoTheGreen said:
Don't know, I'm not going to try
Click to expand...
Click to collapse
Did u relocked bootloader?
Alexxxx1 said:
Did u relocked bootloader?
Click to expand...
Click to collapse
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
GizmoTheGreen said:
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
Click to expand...
Click to collapse
Yes, with this method bootloader stay unlock same as on p10 plus, but if you can enter in stock recovery no afraid of any brick if you relock bootloader.
Poslato sa VKY-L29 uz pomoć Tapatoka
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
GizmoTheGreen said:
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
Click to expand...
Click to collapse
Did you try it? Someone said he wasn't able to do it.
Jaizu said:
Did you try it? Someone said he wasn't able to do it.
Click to expand...
Click to collapse
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
So, what's the first impressions of Emui 8?
Sent from my WAS-LX1 using Tapatalk
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
Mind sharing patched .img files? What device model are you using?
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
Got a link?
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
If you mean that: http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img (TWRP-3.2.1-0 for Huawei P Smart)
I've not test yet if it's fully comatible, but you can enter into TWRP and seems to works.
Reboot into fastboot and enter the command:
fastboot flash recovery_ramdisk FIGO321.img
recovery_ramdisk partition in Android 8 is the Recovery
Hi All
Note: This procedure is for Windows PC only.
I can see there is a similar thread to help on rooting your device.
I created this thread it make it more easier and focussed just on rooting your device rather with additional information.
This menthod is to root your device without TWRP.
There is a detailed guide by @Freak07 which you can find here.
Prerequisite:
1. Your device bootloader is unlocked
2. You have enabled your Developer Options and enabled USB debugging (Settings > System > About phone > Software information, tap build number 7 times to enable Developer options)
3. Flash Tools, download from here and extract to your PC
4. Latest Magisk Manager which you can download from the relevant thread (search or click here)
BOOT IMAGES
Stock Boot images:
Firmware WW_16.1220.1906.174_0 >>>> Click here
Firmware WW_16.1220.1908.189_1.1.1 >>>> Click here
Patched Boot images:
Firmware WW_16.1220.1906.174_0 (patched with Magisk 19.3 stable version) >>>> Click here
Firmware WW_16.1220.1908.189_1.1.1 (patched with Magisk 19.3 stable version) >>>> Click here
Steps to Root:
1. Connect your device with USB cable
2. Go to the folder where you copied Flash Tools and double click to run cmd-here.exe
3. In the command prompt run the command adb devices, this will run the Deamon and show your device under List of devices attached. If doesn't show your device, check your device is connected and USB debugging is enabled.
4. Now run the command adb reboot bootloader to boot your device in to Fastboot mode
5. Now flash the patched boot image with the command fastboot flash boot magisk_patched.img
Restart your device with the fastboot command fastboot reboot and enjoy your ROOTED device
It works great, thanks!!
But then I installed miracast magisk module and now everytime I flash magisk patched boot, my phone is stuck on Asus logo so I have to flask stock boot to use my phone.
I think I should flash system image but when I unzip firmware from Asus site ( https://www.asus.com/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/ ) on my mac,
It doesn't show any system image (or even boot image), only "compatibility" , "payload" and some other stuff.
Can you tell me what I am doing wrong?
EMJI79 said:
But then I installed miracast magisk module and now everytime I flash magisk patched boot, my phone is stuck on Asus logo so I have to flask stock boot to use my phone.
I think I should flash system image but when I unzip firmware from Asus site ( https://www.asus.com/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/ ) on my mac,
It doesn't show any system image (or even boot image), only "compatibility" , "payload" and some other stuff.
Can you tell me what I am doing wrong?
Click to expand...
Click to collapse
Hi ASUS firmware for Zenfone do not have system img and instead it is the payload.bin which holds all system files. You can extract system image using python based tools.
You can remove the module if you flash TWPR and using file manger in TWRP to remove magix folder. This will remove magisk completely. Or, reset system via stock recovery. Completely switch off your device. Now, press and hold volume up button and press power button. It will help you to boot in to stock recovery. Or you can follow the guide here
If you still want to flash stock firmware, this link may help.
smohanv said:
Hi ASUS firmware for Zenfone do not have system img and instead it is the paylod.bin which holds all system files. You can extract system image using python based tools.
You can remove the module if you flash TWPR and using file manger in TWRP to remove magix folder. This will remove magisk completely. Or, reset system via stock recovery. Completely switch off your device. Now, press and hold volume up button and press power button. It will help you to boot in to stock recovery. Or you can follow the guide here
If you still want to flash stock firmware, this link may help.
Click to expand...
Click to collapse
If I just reset system via stock recovery, will I lose user data?
EMJI79 said:
If I just reset system via stock recovery, will I lose user data?
Click to expand...
Click to collapse
Yes you do. But you will not loose the files and folder in internal storage like photos etc..
You have to install all user applications again.
I would suggest you to follow the thread to flash TWRP and just remove magisk folder in TWRP file manager.
smohanv said:
Yes you do. But you will not loose the files and folder in internal storage like photos etc..
You have to install all user applications again.
I would suggest you to follow the thread to flash TWRP and just remove magisk folder in TWRP file manager.
Click to expand...
Click to collapse
I will do that.
Just another question: can I just boot in Twrp without installing it?
EMJI79 said:
I will do that.
Just another question: can I just boot in Twrp without installing it?
Click to expand...
Click to collapse
You can boot in to TWRP without permanently flashing it.
Take few cautions before you attempt to boot in to TWRP using this option,
1. Remove fingerprint in security settings (settings > Security & lock screen > Fingerprint)
2. Remove screen lock PIN in settings > security & lock screen > screen lock > select NONE here and also make sure Fingerprint is not enabled in this screen
How to boot in to TWRP:
Download TWRP from here
Use the command in Fastboot > fastboot boot twrp-3.3.1-15-ASUS_I01WD.img
Now you can use file manager in TWRP and remove magisk folder. You have to mount system folder to do so.
EMJI79 said:
I will do that.
Just another question: can I just boot in Twrp without installing it?
Click to expand...
Click to collapse
Did you try the method I explained here >> https://forum.xda-developers.com/showpost.php?p=80100285&postcount=8
smohanv said:
Did you try the method I explained here >> https://forum.xda-developers.com/showpost.php?p=80100285&postcount=8
Click to expand...
Click to collapse
I will do that now. I just came back home.
Thanks.
---------- Post added at 04:28 PM ---------- Previous post was at 03:58 PM ----------
Do you think I can this:
https://magiskroot.net/uninstall-magisk-module-twrp/
edit: it's for older versions of Magisk
Still I can't see the Magisk modules or Magisk folder in /data or /system/data , it appears empty
EMJI79 said:
I will do that now. I just came back home.
Thanks.
---------- Post added at 04:28 PM ---------- Previous post was at 03:58 PM ----------
Do you think I can this:
https://magiskroot.net/uninstall-magisk-module-twrp/
edit: it's for older versions of Magisk
Still I can't see the Magisk modules or Magisk folder in /data or /system/data , it appears empty
Click to expand...
Click to collapse
Are you able to boot in TWRP recovery as I mentioned. Please confirm.
Have you mounted system in twrp. It won't go anywhere. You should find it. I have done this several times.
Read here for some more help.
https://magiskroot.net/uninstall-magisk-module-twrp/
Sent from ASUS ZenFone 6 (2019) using Tapatalk
smohanv said:
Are you able to boot in TWRP recovery as I mentioned. Please confirm.
Have you mounted system in twrp. It won't go anywhere. You should find it. I have done this several times.
Read here for some more help.
https://magiskroot.net/uninstall-magisk-module-twrp/
Sent from ASUS ZenFone 6 (2019) using Tapatalk
Click to expand...
Click to collapse
Yes I am able to boot in TWRP and browse inside the files.
I am checking system square in TWRP mount section however I tried to mount data also and it isn't possible.
I will try the advised link later today, thanks for the help.
EMJI79 said:
Yes I am able to boot in TWRP and browse inside the files.
I am checking system square in TWRP mount section however I tried to mount data also and it isn't possible.
I will try the advised link later today, thanks for the help.
Click to expand...
Click to collapse
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
smohanv said:
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
Click to expand...
Click to collapse
Which method from the link do you advise to try first?
smohanv said:
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
Click to expand...
Click to collapse
Check this link and follow. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
smohanv said:
Check this link and follow. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
Click to expand...
Click to collapse
No luck, can't flash anything in TWRP ...
Guess I have to wait TWRP is updated.
Mauronofrio telling that one have to install 3.3.1-15 to write on data:
https://forum.xda-developers.com/ze...cial-twrp-recovery-asus-t3937844/post80108953
EMJI79 said:
Mauronofrio telling that one have to install 3.3.1-15 to write on data:
https://forum.xda-developers.com/ze...cial-twrp-recovery-asus-t3937844/post80108953
Click to expand...
Click to collapse
yes. I can see that there is an installer (magisk module) which has to be flashed in magisk in order for TWRP to write on data partition.
In your case, you cannot boot your device with rooted image as you have a module which is causing bootloop. Catch 22 sistuation.
In this situation I think you have only one option left which is resetting your device loosing all installed apps. Sorry mate. Could not help you at this time.
New Update
smohanv said:
yes. I can see that there is an installer (magisk module) which has to be flashed in magisk in order for TWRP to write on data partition.
In your case, you cannot boot your device with rooted image as you have a module which is causing bootloop. Catch 22 sistuation.
In this situation I think you have only one option left which is resetting your device loosing all installed apps. Sorry mate. Could not help you at this time.
Click to expand...
Click to collapse
Hello Smohanv,
Say I want to update to the latest Firmware that got released yesterday, and I am currently rooted via the method you introduced on the first page with firmware 16.1220.1906.174_0, how do I go about it?
If I do the Manual update, will I loose root? Or should I wait for you to release a patched one, and then do the manual update?
Thanks.
Damionix said:
Hello Smohanv,
Say I want to update to the latest Firmware that got released yesterday, and I am currently rooted via the method you introduced on the first page with firmware 16.1220.1906.174_0, how do I go about it?
If I do the Manual update, will I loose root? Or should I wait for you to release a patched one, and then do the manual update?
Thanks.
Click to expand...
Click to collapse
Yes you will loose root. Why do you go for build 171 when 189 is available now.
Official link: >>> https://www.asus.com/us/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/
New build can be downloaded from here >>> Download
TWRP 3.3.1 & Root for Moto 1 VisionThanks to the efforts of yuri-2016 and and my humble contribution, the TWRP 3.3.1 was made from scratch and a new method of Root was tested.
Accept this gift from the bottom of your heart! :highfive:
Instructions
USB debugging must be enabled on the phone and the bootloader must be unlocked!
1. Download attached archive TWRP_Root_Motne_Vision.zip and extract files from it in the following order::
- .bat executive file and vbmeta.img to the folder with the firmware files;
- TWRP-3.3.1_Motorola_One_Vision.img to \adb\ folder.
- TWRP-3.3.1_Installer_Motorola_One_Vision.zip, Disable_Dm-Verity_ForceEncrypt.zip, Magisk Installer, MagiskManager copy to External SDcard in your phone.
2. Load phone in fastboot mode, then connect it to PC, then start an executive file .bat. At the end of flashing the phone will reboot into bootloader-mode and then TWRP again.
3. In the Recovery at the very beginning we put a checkmark in the checkbox to avoid this request in future, and give permission to modify the system for writing.
4. Go to the Wipe page and run the Format Data for decryption. Enter "yes" for the request. Exit to the Main Menu and reboot to Bootloader.
5. Attention! You mus BOOT into Recovery mode (DO NOT INSTALL it !), through the command:
Code:
fastboot boot C:\adb\TWRP-3.3.1_Motorola_One_Vision.img
6. Flash an archive TWRP-3.3.1_Installer_Motorola_One_Vision.zip which will make TWRP permanent.
NOTE: If you want to keep the stock Recovery , do not install this archive, but in order to boot into TWRP you will need to run the command from Step 5 every time.
7. Configure TWRP via “Settings”-page (time, time zone, language, etc.) as you want.
8. Go to “Install” page and flash the Magisk Installer , and flash Disable_Dm-Verity_ForceEncrypt.zip
9. Reboot in System. Phone will reboot several times, don`t worry. Perform initial settings again.
10. Install MagiskManager.apk, because the application installed in the system generates an error and does not start.
Now your device has a custom recovery TWRP and Root rights! :good: :victory:
01/10/2019 New instruction have been made
30/09/2019 New build TWRP !!!
Fixed: Removed the "Enable MTP" button.
Note: Who will reinstall the new TWRP build over the old one, follow these steps:
1. Download new TWRP_Root_Motne_Vision.zip
2. Load into Recovery mode via the command:
Code:
fastboot boot C:\adb\TWRP-3.3.1_Motorola_One_Vision.img
3. Install TWRP-3.3.1_Installer_Motorola_One_Vision.zip
4. Flash Magisk installer, Disable_Dm-Verity_ForceEncrypt.zip.
5. Reboot in the Recovery again.
6. Try to adjust the brightness, connect USB-OTG, check the absence of the "Enable MTP" button.
Old instructions
Friends! I got the Root for this device.
I'm not saying it's the only way to get a Root. I suggest something I used on my own device.
You are responsible for everything you do with your device!
Getting Root was performed on firmware XT1970-3_KANE_RETEU_DS_9.0_PSA29.160-30
Attention! The process of receiving the Root will delete all your data from the device.
1. The bootloader must be unlocked on the device beforehand.
2. Extract files from the archive https://drive.google.com/open?id=1xgTVlIXOFWq59I1-D9bnRlj1heJycT_I :
- vbmeta.img, vbmeta_patch.img and boot_patch.img to the adb folder;
- MagiskManager-v7.3.4.apk to a convenient folder for you. It will then need to be copied either to the phone memory or to the SD Card.
3. Load the device into fastboot mode and connect it to your PC.
4. Flash vbmeta.img with the command:
Code:
fastboot flash vbmeta_a vbmeta.img
5. Flash boot_patch.img with the command:
Code:
fastboot flash boot_a boot_patch.img
6. Flash vbmeta_patch.img command:
Code:
fastboot flash vbmeta_a vbmeta_patch.img
7. Load the device into the system by pressing the Start button. Phone will reboot in Recovery where there will be a warning that it is necessary to execute Factory reset. It is necessary to give your consent.
The phone will reboot several times again, don't worry.
8. Perform the initial setup. Install MagiskManager-v7.3.4.apk.
9. Launch the MagiskManager application. He will offer to update the application, click the Yes button. The phone will reboot.
Your device now has Root permissions and access to the system!
ilia3367 said:
Friends! I got the Root for this device. Tomorrow I will try to describe in detail the process of getting the Root.
Click to expand...
Click to collapse
Thank you so much!
That's incredible. I hope it works on Moto One Action too.
ilia3367 said:
Friends! I got the Root for this device. Tomorrow I will try to describe in detail the process of getting the Root.
Click to expand...
Click to collapse
This is excellent news, thanks !
Unlock the bootloader
Download the stock rom
Install magisk manager
Click install and chose patch boot image
Copy the patched boot image to your PC
Flash the new image using ADB
I think these are the steps to root the phone
SnoopDoggyStyleDogg said:
Unlock the bootloader
Download the stock rom
Install magisk manager
Click install and chose patch boot image
Copy the patched boot image to your PC
Flash the new image using ADB
I think these are the steps to root the phone
Click to expand...
Click to collapse
Those step give you the validation img error
I'm continuing with my friend to create TWRP
SnoopDoggyStyleDogg said:
Unlock the bootloader
Download the stock rom
Install magisk manager
Click install and chose patch boot image
Copy the patched boot image to your PC
Flash the new image using ADB
I think these are the steps to root the phone
Click to expand...
Click to collapse
That's what a lot of people think. I thought so too.
Thank you so much for the guide... I'll try in the afternoon
@ilia3367
Hello
I have a One Action, could you help me to get root?
Do I need to patch all those images with Magisk?
Thanks in advanced.
sfoot13 said:
@ilia3367
Do I need to patch all those images with Magisk?
Click to expand...
Click to collapse
Make a modified boot.img with Magisk and take my other files. Try to do it according to the instructions.
ilia3367 said:
Make a modified boot.img with Magisk and take my other files. Try to do it according to the instructions.
Click to expand...
Click to collapse
Thank you so much for your help and work!
I'll do that when I arrive at home
Hey! That's really good news pal. Do you think I can flash your Vision's vbmeta.img and vbmeta_patch.img and my magisk-patched boot.img on my Motorola One Action?
Tuandroidaldia said:
Hey! That's really good news pal. Do you think I can flash your Vision's vbmeta.img and vbmeta_patch.img and my magisk-patched boot.img on my Motorola One Action?
Click to expand...
Click to collapse
Replied on the previous page.
ilia3367 said:
Replied on the previous page.
Click to expand...
Click to collapse
Nope, it's not working on Motorola One Action, it says: "<bootloader> validation image failed" using my Magisk Patched Boot.img. Did you patched your boot using another tool or how?
Thanks.
@ilia3367 Finally Rooted. Thank you so much for your work. Very appreciate!
Tuandroidaldia said:
Nope, it's not working on Motorola One Action, it says: "<bootloader> validation image failed" using my Magisk Patched Boot.img. Did you patched your boot using another tool or how?
Thanks.
Click to expand...
Click to collapse
what about vbmeta? was possible to flash it?
@ilia3367 before Root and after unlock the bootloader when I touched the system update option, it said: "system integrity is compromised" now after Root when i touch it , it check for update again. It means that I can update the firmware via ota?
AndresOrue said:
@ilia3367 before Root and after unlock the bootloader when I touched the system update option, it said: "system integrity is compromised" now after Root when i touch it , it check for update again. It means that I can update the firmware via ota?
Click to expand...
Click to collapse
Magisk probably hides the bootloader status so that update check works, but it will most likely fail during install. At least that's how it works on moto one and moto one power.
On moto one I either reflash current build without wipe and then take ota and re-root after, or just flash the update if I get them early, and re-root-
AndresOrue said:
It means that I can update the firmware via ota?
Click to expand...
Click to collapse
I don't think it's possible. The system must be completely virgin to update the OTA. Then why do I need a Root? I need it to customize the system.
ilia3367 said:
I don't think it's possible. The system must be completely virgin to update the OTA. Then why do I need a Root? I need it to customize the system.
Click to expand...
Click to collapse
Thanks a lot. I just unlocked my BL for the second time and this root method is working fine.
May I ask if you just used magisk manager to patch boot, cause when I do I get error on flash.
Code:
(bootloader) is-logical:boot_a: not found
Sending 'boot_a' (33792 KB) OKAY [ 1.172s]
Writing 'boot_a' FAILED (Status read failed (Too many links))
And how did you patch vbmeta?
I'm just curious since this patched boot isn't the latest and I wonder how to make this work with the latest boot.img from September patch update.
So after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root ; i modified the contents so it would fit the moto phone a bit better:, but thnx goes to Ibolito over at the pixel 3 forums
1 ) Download the latest Android factory image for your device ("see this guide on where to find it.
2 ) Extract the "boot.img" file from the downloaded image and copy it to your phone.
Warning! Make absolutely sure the firmware is exactly the same as the installed one. If not, you might loose touch.
Be aware that LMSA will download the latest firmware, even if it is not yet installed. That might break your touchscreen
Click to expand...
Click to collapse
3 ) Download latest Magisk Manager application on your phone and install it :
Link
4 )Press on the Install Magisk button (the one on the top, not the Magisk Manager), then Install > Select and Patch a File and now select the Boot.img file you extracted earlier. When the process is done, just put the patched boot.img file on your computer in the same folder as your ADB and FASTBOOT tools, the file's name is magisk_patched.img
edit: i received a comment that the name might be something like Magisk_patched_somerandomletters_.img since the latest magisk update
5 ) Enable adb debugging on your phone and connect it to your computer via USB.
Open a command prompt on your computer and migrate to the folder where the ADB and Fastboot tools are located.
(for exemple, for me it's : cd C:\adb).
7 ) Reboot your phone to fastboot by typing adb reboot bootloader
8 ) Flash the Boot.img you just patched with magisk by typing fastboot flash boot magisk_patched.img
extra: You could test a single boot with that image by typing "fastboot boot magisk_patched.img"
if it boots fine you should have root for this single boot / magisk would show as installed.
9 ) When it's done, reboot by typing fastboot reboot
10 ) Open your Magisk Manager app and check if everything is good, and it should be
extra info:
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Edit: rewritten entire post so it would look more like a guide, and extra warning because a lot of people seem to loose touch if they don't have the exact same firmware downloaded as on their phone.
Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?
testtubebaby said:
Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?
Click to expand...
Click to collapse
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed
pjottrr said:
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed
Click to expand...
Click to collapse
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?
Sorry, no idea, i found the provided link via google,
testtubebaby said:
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/sofiar/official/
zuggi_m said:
https://mirrors.lolinet.com/firmware/moto/sofiar/official/
Click to expand...
Click to collapse
@zuggi_m , how does posting the same url help?
i don't see a retgb here ....
Maybe someone with more dev experience can tell if you need the exact same firmware or if the version numbers are the same it is ok to use that file ?
No fastbootd?
One Hyper needs fastbootd in order to flash boot and root
mingkee said:
No fastbootd?
One Hyper needs fastbootd in order to flash boot and root
Click to expand...
Click to collapse
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.
pjottrr said:
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.
Click to expand...
Click to collapse
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery
mingkee said:
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery
Click to expand...
Click to collapse
maybe i'm missing your point here, my description is just so people who have to figure it out can just use my steps to get root, it is indeed based on fastboot flashing . so i'm not sure what you are trying to say, or am i misinterpreting something?
https://forum.xda-developers.com/motorola-one-hyper/development/rom-omnirom-t4044405
I did root on One Hyper (shipped with Android 10) using fastbootd method
Used old method soft brick my One Hyper
That's why I'd like to know
pjottrr said:
so after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root
you need to download the firmware for our device,
That can be found here;
https://mirrors.lolinet.com/firmware/moto/sofiar/official/RETEU/
after that, extract, patch, fastboot install patched version, done.
I did have some issues with the current magisk manager ( from highonandroid, i did find another source, installed version 7.5.1 of the magisk manager from this source
and that one was able to patch the boot.img
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Click to expand...
Click to collapse
There's a head up
US version: Sofia
The rest: Sofiar
I will buy US G Power in May and let's the fun begin
Check out One Hyper general to install Dolby Atmos and it can be toggle on/off.
Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.
CCivale said:
Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.
Click to expand...
Click to collapse
So you should know G Stylus ROM is Sofiap.
Be aware the way Android 10 flashing is different.
Download and install the latest ADB in order to access fastbootd (fastboot reboot fastboot) and flash boot, recovery, dtbo, vbmeta, and super
Hmmmm, I will have to read more about fastbootd in your other thread.
I did use the boot.img for the sofiap.
Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.
hazd said:
Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.
Click to expand...
Click to collapse
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
pjottrr said:
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
rsdsecure-cloud.motorola.com/download/SOFIA_RETAIL_QPM30.80-51_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.
hazd said:
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.
Click to expand...
Click to collapse
I downloaded the kernel and waiting for the unit.
I can flash full ROM with fastboot and fastbootd, but just flashing kernel would be much faster.
Moreover, check One Hyper general to get Dolby Atmos because you can turn on and off anytime you want.