Develop Bugs

[Q] thread for flexiview fv-1

hello.
Do you plan to open a thread for the android flexiview fv-1 ?
Thank you

up
It's a good idea
anybody ?

Ahh yes,
A thread for associated Android Box Tv.
the Flexview FV-1 model it is the must known.
Currently on Android os 2.2, but we hope to update it with xda Developpers.
(http://yoomon.net/drivers/Flexiview & ftp://218.17.181.67/ login: overseas / pass: overseas )
waiting for news
Regards

I have one too, and wiling to help to update it.
This thing screams for honeycomb.
The Latest firmware update I've found is this one:
U110781_1110081_HW
http://goo.gl/bKmm5
Mirrored thanks to ZilverZurfarn from androidforums
INSTRUCTIONS:
Extract the OSK file and rename to android.osk
Copy to an SD card in a folder named /UpdateKit/
Go to Settings -> Update System
Will ask to restart
The updae takes some time, wait until green light flashes

Hello all ,
Found an new link for this Box feedback needed.
>> http://www.hama.de/portal/action*2598/articleId*29069636
Firmware >> http://www.hama.de/webresources/drivers/00054/54802_FW_U110781_1111070.zip

Hi everyone, I bought not long ago a box tv android (Flexiview FV-1) + Logitech K400.
My problem is I can not put the keyboard "Logitech K400" to "azerty".
I voullue test method "thorin31" located on the XDA site:
http://forum.xda-developers.com/showthread.php?t=1082408
with "z4root.1.3.0.apk" but this does not work "do you know a rooter apk that can the tv box (Flexiview FV-1).", tanks.
I apologize for my English (translation gooogle it)

no andoid marketplace on the german rom. it would crash everytime.

Hello trple,
yes i'm rolling back to the October firmware, because you"re right the Hama firmware is bad.
anyone have try to put a MIUI rom on this flexiview?
Regads

No news since 2011 ??
No root for 2.2 ??
I am really wishing for a 2.3 update, not to mention ICS =)
PS: here's the latest firmware for the FV-1 Flexiview (Android 2.2)
http://www.mediafire.com/?hqnr0nx14ar2efu
Thanks to pippopelo from androidforums
I already posted an easy flashing guide a cuple of posts above
UPDATE: I was able to gain temp ROOT for the Android 2.2 firmware with z4Root 1.3.0

Here is Firmware that has been modified by a friend and is in Alpha form for more editing.so if you want please test and add comments ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flexiview FV-1 Android 2.2 TV Box - Uberoid Alpha
Baserom: 154801_FW_U110781_1203161.zip
Changelog:
- added Google Play Store 3.5.15 (formerly known as the Google Market)
- added su bin
- modified build.prop to spoof a Samsung Galaxy S II
- disabled auto updates
- changed boottext
- removed facebook
- removed google maps 5.5.0
- updated youtube to 2.3.4
- removed air control lite
- removed streetview for google maps
- removed quickoffice trail
Download: Flexiview_FV-1_Uberoid_Alpha.7z 98MB

Yes this is the same ROM as APRIL release on Android Forum
http://androidforums.com/google-tv/338651-android-tv-box-flexiview-fv-1-a-18.html.
People say, this rom is not ROOTABLE.

najhouse said:
Yes this is the same ROM as APRIL release on Android Forum
http://androidforums.com/google-tv/338651-android-tv-box-flexiview-fv-1-a-18.html.
People say, this rom is not ROOTABLE.
Click to expand...
Click to collapse
My hopes for a 2.3 or 4.0 uptade are vanishing...
Now that the market is flooded with 4.0 devices I guess they won't work on any further support/development

I think my original rom is not rootable, z4root runs for 24 hours and device doesn't get root. What firmware I can put on it to root the device?

With the news of an xbmc for android port in early stages i had new hope for this device but then i found out xbmc will need android 2.3+ but looks like there might be hope for a port of android 2.3 or 4.0 for the flexiview fv-1 because someone has managed to port android 4.0 on a device with the same cpu and gpu as the flexiview fv-1 so it definitely seems possible, maybe if someone on this board is familiar enough with this stuff will give it a try ill keep my fingers crossed…. see links below for the device specs and youtube vid of it in action.
*Note i cant post links yet so just copy and paste the links below and add the needed info in front*
pjlee-em.blogspot.com/2012/01/android-40-on-mango210-s5pv210.html
youtube.com/watch?v=6zQL3AIm6lg&feature=autoplay&list=UUWIHb09Krw9US6aZxqtEbBQ&playnext=13
youtube.com/watch?v=vP6NzHNfyuA&feature=bf_prev&list=UUWIHb09Krw9US6aZxqtEbBQ
Also a port of Linux was also done on the flexivew fv-1 but not everything fully working yet but it does go to show this device can run a different rom more info at link below
projectgus.com/2012/02/debian-on-flexiview-fv-1/comment-page-1/#comment-6064

I was just wondering if you guys know if this is legit? now that XBMC is out for android ))
there is a guy selling flexiview fv-1 with android 4.0, I would post the link if I was allowed
its on ebay just search for
Flexiview FV-1
and it should come straight up.

backlash666 said:
I was just wondering if you guys know if this is legit? now that XBMC is out for android ))
there is a guy selling flexiview fv-1 with android 4.0, I would post the link if I was allowed
its on ebay just search for
Flexiview FV-1
and it should come straight up.
Click to expand...
Click to collapse
I couldn't find it
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=Flexiview+FV-1&LH_PrefLoc=2
Can you post the item number?
(Or split the link)

SwordLegend latest >>>>
Android 4.1.1 (JellyBean) on Mango210
Android 4.1.1 (Jelly Bean) Released. This movie is Android 4.1.1 Porting on Mango210 Platform Board. I searching difference Code Change on 4.1.1 and 4.0.3. So, Interesting Code Change. Frameworks tree has changed. And WPA_SUPPLICANT 0.5 disappear. gps native reference function. ... And Change 3D UI library, but i see it the same. This Movie is Android Logo, Locking Screen, Default Wallpaper And Setting View. This Version. Kernel 3.0.31 Android 4.1.1_r3 Board is Mango210. Processor is Samsung S5PV210 (Same s5p110) Below two movie is running test on s5pv210 board. now, running device is Screen 7inch (1024x600) LCD Multitouch (hx8526) ALSA Sound (wm8960) KeyPad 3 Axis Sensor Two Camera (noon130pc20, mt9p111)
http://www.youtube.com/watch?feature=player_embedded&v=KLErQhcjtmU
http://www.youtube.com/watch?v=7IYgf4DOjCo&feature=player_embedded
and
Mango210 fastboot bootloader
Fastboot bootloader build complete. support ICS [Android 4.0]
uboot based for smdkv210's uboot.
addition, ext4 fileystem and ext4 sparce support.
addition command.
in the future will support ext4 format command and logo.
command :
- fastboot oem format
: sdcard initialize, partition create.
- fastboot erase fat
: media partition create.
- fastboot -w flash kernel [kernel_Image]
: erase userdata, cache and write kernel
- fastboot flash system [system.img]
: write system image, ext4 sparse support
- fastboot flash userdata [userdata.img]
: write userdata image, ext4 sparse support
usage :
1. insert sdcard (from host)
2. unzip mango210_uboot.zip
3. run script : ./sdwriter [destiny disk]
: ex) ./sdwriter /dev/sdb
4. insert sdcard (to mango210)
5. booting mango210 and press gpio key. -> into the fastbooting mode.
6. typing command.
- fastboot oem format
- fastboot erase fat
- fastboot -w flash kernel [image]
- fastboot flash system [system_image]
- fastboot flash userdata [userdata_image]
7. last, rebooting board.
image link : bootloader link

JohnnyGT said:
SwordLegend latest >>>>
Android 4.1.1 (JellyBean) on Mango210
Android 4.1.1 (Jelly Bean) Released. This movie is Android 4.1.1 Porting on Mango210 Platform Board. I searching difference Code Change on 4.1.1 and 4.0.3. So, Interesting Code Change. Frameworks tree has changed. And WPA_SUPPLICANT 0.5 disappear. gps native reference function. ... And Change 3D UI library, but i see it the same. This Movie is Android Logo, Locking Screen, Default Wallpaper And Setting View. This Version. Kernel 3.0.31 Android 4.1.1_r3 Board is Mango210. Processor is Samsung S5PV210 (Same s5p110) Below two movie is running test on s5pv210 board. now, running device is Screen 7inch (1024x600) LCD Multitouch (hx8526) ALSA Sound (wm8960) KeyPad 3 Axis Sensor Two Camera (noon130pc20, mt9p111)
http://www.youtube.com/watch?feature=player_embedded&v=KLErQhcjtmU
http://www.youtube.com/watch?v=7IYgf4DOjCo&feature=player_embedded
and
Mango210 fastboot bootloader
Fastboot bootloader build complete. support ICS [Android 4.0]
uboot based for smdkv210's uboot.
addition, ext4 fileystem and ext4 sparce support.
addition command.
in the future will support ext4 format command and logo.
command :
- fastboot oem format
: sdcard initialize, partition create.
- fastboot erase fat
: media partition create.
- fastboot -w flash kernel [kernel_Image]
: erase userdata, cache and write kernel
- fastboot flash system [system.img]
: write system image, ext4 sparse support
- fastboot flash userdata [userdata.img]
: write userdata image, ext4 sparse support
usage :
1. insert sdcard (from host)
2. unzip mango210_uboot.zip
3. run script : ./sdwriter [destiny disk]
: ex) ./sdwriter /dev/sdb
4. insert sdcard (to mango210)
5. booting mango210 and press gpio key. -> into the fastbooting mode.
6. typing command.
- fastboot oem format
- fastboot erase fat
- fastboot -w flash kernel [image]
- fastboot flash system [system_image]
- fastboot flash userdata [userdata_image]
7. last, rebooting board.
image link : bootloader link
Click to expand...
Click to collapse
WOW, nice job
Will this work with our flexiview fv-1 ??

i hope so mate maybe someone here can put their magic to work

gtrab said:
I couldn't find it
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=Flexiview+FV-1&LH_PrefLoc=2
Can you post the item number?
(Or split the link)
Click to expand...
Click to collapse
Item number: 230642023893
that is th item i also looked at.. and it does say Android 4.0
Confirmed with the Seller and he told me that it is update to Android 4.0

[ROM][JB 4.1.2][Xperia Acro S] MIUI V5 UB [3.10.25] -CM10 BASE-STOPPED DEVELOPMENT

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DEVELOPMENT OF THIS ROM IS STOPPED - THANK YOU FOR YOUR SUPPORT DURING THE TIME
NEW MIUI V5 ROM FOR SONY XPERIA Acro S - BASED ON SONY STOCK FW.96 IS NOW COMPLETELY BUG FREE AND WORKS MUCH BETTER THAN THIS CM10 BASED VERSION
NEW MIUI V5 ROM WORKING ON DEVICES WITH LOCKED/UNLOCKED BOOTLOADERS
STOCK BASED MIUI V5 ROM FOR SONY XPERIA ACRO S LINK
Notes:
- This Rom is originaly made by crew from MIUI Porting Team, MIUI Android Team & Me ,and all regards are going to them. -
Big Thanks XDA User Kikisss & schickel - File Hosting Web Space .
- All files and tutorials are colected from Internet & XDA Forums,so all regards are going to their authors.Also they could be used for installing any custom rom for Xperia Acro S -
- I'm Not responsible for any eventual errors and misbeheaveing of your devices. -
ROM Description & Changelog:
This ROM is based on the XPERIA ACRO S LT26W JELLYBEAN 4.1.2 FXP234 PORT (Thanks FXP )
to make the ROM with patchrom adaptation (Thanks Midnight Souls), and include various bug fixes to work normal .
- EVERYTHING WORKS -
Please Post Suggestion Or Bugs​ Languages Will Be Included:
English
Chinese
Polish
Russian
Ukrainian
Slovak
Czech
French
Hungarian
Danish
Dutch
German
Greek
Spanish
Italian
Arabic
Norwegian
Hebrew
Vietnamese
Korean
Indonesian
Brazilian Portuguese
Turkey
Official Build 3.10.25 Changelog:
REQUIREMENTS & PROCEDURE TUTORIALS:
1.Pre - Requirements:
Windows OS powered Computer
Android Device Drivers Installed(Drivers Thread)
Enabled Settings → Security → Unknown Sources & Settings → Development → USB Debugging
Phone Battery charged - 60% at least.
Stock Or Stock Based Android Rom - Not Strictly Required But Best Because Of Bugs
2.Backup Your Data (Wondershare MobileGo,etc...)
3.Unlocked Bootloader
- TUTORIAL -
{Let's Start..
:: Firstly Get & Note Down IMEI Code of Your Device. It can be Obtained by Dialing *#06# in Phone Dialer.
: :Charge Your Phone Upto 60% Battery Level So As To Ensure That It Doesn’t Turn Off During The Process of Bootloader Unlocking.
:: Temporarily Disable Your PC’s Antivirus Software As This Might Interrupt The Process.
By Assuming That You’ve Followed The Essential Steps Mentioned Above, You Can Now Move To The Further Part Of The Article Where Will Check on How To Unlock Bootloader.
Step 1 : Installation of USB Drivers.
:: Download Fast Boot Package With USB Drivers From The Attachements.
:: Switch Off Your Device & Connect It To The Computer Using USB Cable While Enabling Fast Boot Mode (Press & Hold Volume Up Button To Trigger Fastboot Mode). Windows Will Start Driver Installation As soon As You’ll Connect Your Device To The Computer While Keeping It In Fastboot Mode.
:: Now Extract The Fastboot Package Which You’ve Just Downloaded in Your PC.You Will Find 2 Folders Named As ‘fastboot’ & ‘usb_driver’.
:: Point Driver Installation Location To ‘usb_driver’ Folder.
:: Once Drivers Get Installed, Disconnect Xperia Acro S From PC & Power On It.
Step 2 : Unlocking Bootloader.
:: Before Unlocking Bootloader, You Need To Check That if Your Device’s Bootloader Can Be Unlocked Or Not. For Checking Bootloader Status Dial *#*#7378423#*#* From Phone Dialer To Access Service Menu.Find Bootloader Unlock Status Over There. If It is Set To Yes Then Only You Can Unlock ::Your Device’s Bootloader Otherwise It’s Impossible To Unlock It.
:: After Verifying Bootloader Unlock Status Set To Yes, Go To Sony’s Official Bootloader Unlocking Site.
:: Scroll To The Bottom of The Page & Press Continue.
:: You Will be Prompted With The Message “Are You Sure ?”. Accept It By Clicking On “Yes I Am Sure”.(Assuming That You’ve Read It Properly). Then Accept The Legal Terms.
:: Now You’ll Get “Create Unlock Request” Page.Enter Your Name, Email Address & IMEI (Which You’ve Noted in Essential Steps Mentioned Above).
:: You’ll Now Get Unique Key Which Will Be Displayed On The Screen. Save It Safely As We Will Require It In Next Part Of The Article.
:: Open CMD in your computer and type "cd (location of Fastboot Folder)".
:: Again Connect Your Device To PC by pressing and holding the Volume Up button.
:: Now In Command Prompt (CMD) Type The Following Command :
fastboot.exe -i 0x0fce getvar version
:: If Value is Returned (It Should return 0.5), It Means Device is Connected Properly.
:: Type This Second Command Mentioned Below :
fastboot.exe -i 0x0fce oem unlock 0xKEY
:: Replace The KEY With The Unique Key Which You’ve Received Earlier and Hit Enter.
Congratulations !! You’ve Successfully Unlocked Bootloader.}
Note:
- Easiest way to enter Windows CMD is holding SHIFT + RIGHT CLICK on empty space in folder than choose option " Open Command Window Here " .
4.Root
- TUTORIAL -
Solution 1 - For all ICS firmware
(Thanks Bin4ry)
1.) Download attached Root_with_Restore_by_Bin4ry_v31.
2.) Extract it using 7zip
3.) Double click the RunMe.bat and follow instructions!
Xperia phones with "older" firmware = Normal mode
Sony Tablet and similar = Special mode
Xperia phones with JB Firmare = Mode 3
Solution 2 - For JB firmware .200 / .211.
(Thanks DooMLoRD)
1.) Download attached SuperSU-1.25-Busybox-1.20.2-UPDATE.
2.) Enter Recovery (CWM) (restart device (turn off, turn on & vol+) and while on the SE logo, simply tap the screen of your phone several times.
3.) Select [install zip from sdcard]→[choose zip from sdcard]→[SuperSU-1.25-Busybox-1.20.2-UPDATE.zip] → [YES]
4.) Wait flash finished, press Back and select reboot system now [], the phone going to automatically restart.
5.Flash Recovery
- TUTORIAL -
- ICS All Firmware -
(Thanks LEDelete)
1.)Download and install RecoverX Software
2.)Open RecoverX,select your device and recovery and click next.
3.)Install Busybox if program ask,wait till software download recovery for your device.
4.)Flash recovery.
All instruction are in the RecoverX Software,just read on-screen instructions.
- JB Firmware .200 / .211 -
(Thanks DooMLoRD)​
Download the advanced stock kernel (contains recovery)
Advance Stock Kernel with Recovery v02 (FW: 6.2.B.0.200) (CWM 6.0.3.2)
Advance Stock Kernel with Recovery v01 (FW: 6.2.B.0.211) (CWM 6.0.2.7)
Connect device to PC with Debugging Enabled & Reboot device into fastboot mode
Code:
adb reboot bootloader
now flash the recovery using
Code:
fastboot flash boot kernel.elf
[where kernel.img is the name of the file image u downloaded]
thats it!
Notes:
- You will do all procedure from fastboot package folder which you already downloaded for bootloader unlocking. -
- Easiest way to enter Windows CMD is holding SHIFT + RIGHT CLICK on empty space in folder than choose option " Open Command Window Here " .
6.Flash MIUI V5 Rom - Download MIUI V5 3.10.25 - Multilanguage STABLE (Official Port)
[QRCODE]https://drive.google.com/file/d/0Bw8J25RPHMZHMk51M3JXVnpKU1U/edit?usp=sharing[/QRCODE]
Download 3.9.27 Multilanguage Addon(Flash It Via Recovery After First Reboot)
(Thanks To Novastylez )
​
Flash MIUI V4 Rom - Download MIUI V4 3.2.22 - FINAL STABLE
​ - Flash Tutorial -
1. Put xxx.zip copied to the root directory of cell phone memory (that is a direct copy)
2 .Enter Recovery (TWRP or CWM) (restart device (turn off, turn on & vol+) and while on the SE logo, simply tap the screen of your phone several times.
3. Select [wipe data / factory reset] → [YES]
4. Select [wipe cache partition] → [YES ]
5.Select [advanced] → [wipe Dalvik Cache] → [ YES ] → Back
6.Select [install zip from sdcard] → [choose zip from sdcard] → [xxx.zip] → [YES]
7.Wait flash finished, press Back and select reboot system now [], the phone going to automatically restart with installed MIUI ROM.
- First boot need ~ 3 - 5 min. -
7.Flash Google Apps (MIUI Gapps) - Download GAPPS 4.1.2
Flash GAPPS for V4 Rom - Download GAPPS 4.0.4
- GAPPS Tutorial -
1.After first boot reboot your phone to recovery again.
2.Select [install zip from sdcard] → [choose zip from sdcard]→ [miuiandroid_gapps-4.1.2-small_signed.zip] → [YES]
3. Wait flash finished, press Back and select reboot system now [], the phone going to automatically restart with installed GAPPS.
4.Set up your Google and Xiaomi Accounts(for themes).
< NOTES >
Click to expand...
Click to collapse
- TIPS -
Click to expand...
Click to collapse
- If you're coming from other MIUI V5 realase you don't need to [wipe data / factory reset], [wipe cache partition] and install the GAPPS.just flash this rom over previous. -
- Turn Rounded Corners Off,Limit Background Processes To 3 and Enable 'Force GPU rendering' In Development Settings And Reboot For Smoothness. -
- If you have "assert failed" error during flashing rom you can fix it easy by on this way:
Open the zip file with 7zip. go to META-INF\com\google\android\updater-script drag it to your windows explorer (or other programs). open it with notepad :
assert(getprop(";ro.product.device" == ";LT26w"; || getprop(";ro.build.product" == ";LT26w"; ||
getprop(";ro.product.device" == ";galaxys2"; || getprop(";ro.build.product" == ";galaxys2"; ( Or Something Similar )
and
delete them entirely . save it. then drag n drop to your opened 7zip, replacing old updater-script. - (Thanks to m1st3r1)
- VALUABLE APPS -
Click to expand...
Click to collapse
CAMERA
Click to expand...
Click to collapse
- To Replace Native Camera Which Quality Is Poor I Suggest 4 Alternatives:
Download And Install SNAP CAMERA HDR(Trial Version Works Completely ,But You Must Disable Internet Connection To Use It)
Download And Install AttachedMIUI Camera(Thanks Ghetto_Thug) + Panorama App(Thanks blakstar)(Install Panorama App And Copy MIUI Camera(8mpx/720p) To /system/apps ,Set Permissions + Reboot Device)
Download And Install LENOVO SUPER CAMERA(Fully Working With Lot Off Options).
Download And Install SGS4 CAMERA GOOGLE EDITION(Photosphere Working,4.3 Look,8mpx Photo Res.).
ADD BLOCKING
Click to expand...
Click to collapse
To Block All Adverts,Malware/Spyware/Bloatware From Web ,Backup Your /System/etc/hosts file via Root File Manager And Flash This File Via CWM - ADD BLOCKING (ThanksBSDgeek_Jake)
WIFI REGION CODE
Click to expand...
Click to collapse
If Anyone Have Problems With WIFI Region Code ,Just Install This APP/Open It/Tap Install WiFix/Allow Root Permitions/App Will Work Automaticly - WIFIX.(Thanks fardjad)
ADOBE FLASH PLAYER
Click to expand...
Click to collapse
Adobe Stop With Distribution Of Flash Player For Android For Versions >4.0.4 ICS.
Download And Install Attached "Adobe Flash Player 11.1.115.63" App.
Open Browser /Settings And Enable Plugins (Note:Adobe flash Player Not Working With Chrome Browser)
OPERATOR NAME
Click to expand...
Click to collapse
To Change / Remove Carrier Name In Status Bar Download And Install Attached "MiuiSpnConfig"App.
Open App -> Change Carrier Name (Works With Blank Space Too)
-> Save -> Airplane Mode On-> Airplane Mode Off.(Thanks panel1)
WEATHER
Click to expand...
Click to collapse
To Enable Miui Weather For All Countries Download And Install Miui Based WEATHER BZ.
(Note:Enable In App Settings MIUI Integration)
MIUI CONTROL PANEL & XPOSED ALTERNATIVE
Click to expand...
Click to collapse
To Enable Various MIUI Tweaks Download And Install WSM PROJECT.
For More Information on English Visit : LINK
(Thanks BurgerzMD)
MIUI V5 THEMES
Click to expand...
Click to collapse
- Check My MIUI v5 Themes Thread -
MIUI Themes Collection - JUNE 2013
MIUI Themes Collection - JULY 2013
LANGUAGE
Click to expand...
Click to collapse
To Change Language Of Your Device Download And Install Attached "Set Language" App.
Open App -> Choose Language -> Apply.(Thanks Simple App Factory)
MASS STORAGE
Click to expand...
Click to collapse
To Enable Mass Storage Mode (Fast Manipulation With Storage Memory)On Your Device Download And Install Attached "SD Mounter_2.0" App.
Open App -> Grant Root Permissions(First Time Only) -> Mount Internal Storage -> .(Thanks DooMLoRD)
ENJOY YOUR MIUI V5 ROM

Great, another new rom..
But it must have UB like any other MIUI...
Complete tutorial u have there.. Keep it up bro..
Need to read n learn more.. :thumbup:
Sent from my Xperia Hikari using Tapatalk 2

Hey mate, it looks like you could use a mirror here. I can upload it on my server when I finish downloading if you want. Downloading from [email protected] can be frustrating

jazzgott said:
Hey mate, it looks like you could use a mirror here. I can upload it on my server when I finish downloading if you want. Downloading from [email protected] can be frustrating
Click to expand...
Click to collapse
I Have Very Slow Upload Now - If You Can Uploadit To Your Server And PM Me The Link.
I Will Immediately Put It In OP.
Thanks In Advance.

In 12 Hours MIUI Latest Release 3.7.26 Will Be Uploaded.

Ad blocker's link is broken

never skip to try this
THANKS for a new rom @ghetto_thug
rom installed damn smooth,will observe regarding battery life...
thanks man for bringing this updated miui in our acro s :highfive:

MIUI V5 For Xperia Acro S 3.7.26
First Page Updated:
Miui V5 3.7.26 Changelog
Miui V5 3.7.26 Rom Uploaded
Miui V5 3.7.26 Add Block Link Fixed

Original Post Updated:
MIUI Camera + Panorama App Added under Valuable Apps Section

ghetto_thug said:
Original Post Updated:
MIUI Camera + Panorama App Added under Valuable Apps Section
Click to expand...
Click to collapse
where is the link?
edit : your meta inf. inside the rom has 0 size bytes, cannot open by 7zip as an archive...

chrissoriano said:
where is the link?
edit : your meta inf. inside the rom has 0 size bytes, cannot open by 7zip as an archive...
Click to expand...
Click to collapse
MIUI Camera & Panorama Are In Attachments.
Probably Zip Is Not Signed Well.
IS The Flashing From CWM Work?
I Dont Have Device To Try Now.

someone tested it?

ghetto_thug said:
MIUI Camera & Panorama Are In Attachments.
Probably Zip Is Not Signed Well.
IS The Flashing From CWM Work?
I Dont Have Device To Try Now.
Click to expand...
Click to collapse
work but im using .19 when im try to update to 26 there was an error like what you said in op

My JULY MIUI Theme Thread Updated With bunch Of MIUI V5 Themes.
Check Link In My Signature.

Only for unlocked BL, or will it run with standard kernel?

Nagoyablue said:
Only for unlocked BL, or will it run with standard kernel?
Click to expand...
Click to collapse
Only For Unlocked Bootloader. I Will Not Work On Locked BL.

ghetto_thug said:
Only For Unlocked Bootloader. I Will Not Work On Locked BL.
Click to expand...
Click to collapse
when you will fix the .26 sir?

chrissoriano said:
when you will fix the .26 sir?
Click to expand...
Click to collapse
If You Have Error Like In Notes Section Of OP ,Open Roms Zip With Some Archiver And Edit (Not With Notepad Or Word Pad)Updater Script In Meta-Inf Folder.
Delete Everything Before Unmount System And It Will Works.
From Next Release OTA Updates Will Work For Every New Release.

ghetto_thug said:
If You Have Error Like In Notes Section Of OP ,Open Roms Zip With Some Archiver And Edit (Not With Notepad Or Word Pad)Updater Script In Meta-Inf Folder.
Delete Everything Before Unmount System And It Will Works.
From Next Release OTA Updates Will Work For Every New Release.
Click to expand...
Click to collapse
is your meta inf already update,?because the size of your meta inf is " 0 " bytes, when i try to drag it to desktop it says that the archive are damage

chrissoriano said:
is your meta inf already update,?because the size of your meta inf is " 0 " bytes, when i try to drag it to desktop it says that the archive are damage
Click to expand...
Click to collapse
Zero Meta Inf Package Is Fixed.Redownload Rom From Link In OP,And then Change Updater Script.
Or just Copy Meta Inf From 3.7.19 Release.

[RECOVERY][UNOFFICIAL][STABLE&DEV] TWRP [TF300T/TF201] | DISCONTINUED

TWRP for Transformer Pad (compatible with Transformer Prime)​DISCONTINUED​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 2.8, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. TeamWin team started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of their own features. It is a fully touch driven user interface; no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DISCLAIMER : TeamWin team and myself will never ever be responsible for any damages you do to your device !
ALL CREDIT GOES TO AND ONLY TO :
-> TeamWin & omnirom teams (TWRP tree)
-> CyanogenMod team (ROM, device and kernel trees)
-> TheMuppets team (vendor tree)
NOTE : i am not affiliated with any of the teams mentioned above...
INSTALLATION :
=> Option 1 : your device does not have any custom recovery yet ! Please download any of the flashable .zip file below that you are interested in Unzip it and flash recovery.img to your device using fastboot (your tablet must be in fastboot mode [bootloader menu]).
=> Option 2 : a custom recovery has already been flashed to your device ! Please download the flashable .zip file below that you are interested in and flash it from recovery as usual (don't forget to disable .zip signature checking in your current recovery...). From now on (2014-09-01) ALL my .zip files will be signed, so you will be able to flash them with .zip signature checking ON from recovery ! :good:
DOWNLOADS : <= CUSTOM RECOVERY FLASHABLE AND WITH DOCK SD CARD SUPPORT AS EXTERNAL STORAGE
=> STABLE branch : stable ! Includes all upstream merged commits ! EXT4+F2FS <= PLEASE DOWNLOAD LATEST OFFICIAL BUILD FROM TEAMWIN WEBSITE ! THANK YOU !
-> custom TWRP for TF300T (TF201 compatible) [without any device checking] | STABLE ()
=> DEV branch : not as stable as the regular one BUT you can safely flash and use it EXT4+F2FS
-> custom TWRP for TF300T (TF201 compatible) [without any device checking] | DEV () <= NO FILES IN THIS CATEGORY ATM...
=> TRYOUTS : because i do not have a TF300T anymore, ALL releases will be community tested BEFORE they are flagged as working... :good: (do not worry if you decide to test one out, i will give you a procedure below to test it WITHOUT installing it to your device )
PLEASE DO PREFER FILES ABOVE (STABLE & DEV), ATM TRYOUTS ARE STILL THERE AS A FALLBACK ! Thank you !
TESTING OUT A RECOVERY IMAGE WITHOUT INSTALLING IT TO YOUR DEVICE : APPLY ANY CASE :good:
-> unzip any of my zipped recovery images you might be interested in...
-> in the unzipped directory where there is recovery.img, simply input the following fastboot command :
Code:
# fastboot boot recovery.img
:highfive: :good: (your device must be loaded to its bootloader menu [fastboot enabled on it]; if you are using Linux and have adb/fastboot installed on your computer, then the above shell command works as is (you may have to add 'sudo' before it onto Ubuntu / Debian based distributions; if your are using Windows then document yourself on how send properly a fastboot command to your tablet...) =>
Code:
# fastboot -i 0x0B05 boot recovery.img
SHOULD work...
INFO 1 : If you get a failure when flashing from recovery with regular / PhilZ CWM or legacy TWRP, please use the corresponding file WITHOUT device checking... thank you ! :good:
INFO 2 : STABLE branch DOWNLOADS ARE ALSO AVAILABLE FROM THE DOWNLOADS TAB OF THIS PROJECT
INFO 3 : The 'take a screenshot' from recovery feature is now merged upstream, so both STABLE & DEV branches ship with it ! :good:... Simply press 'volume down' + 'power' hardware keys on your device in order to save a screenshot from recovery to your microSD card (files are saved on it to 'Pictures/Screenshots' directory...)
Happy flashing
NOTE : I've started building it for myself, now i'm sharing it ! I use it everyday and still do not have any issue ! Anyway you can feel free to report back Any feedback will ever be greatly appreciated !
PS : Flashing KK ROMs with this recovery is OK (it's its main purpose...), Flashing JB ones has not been tested yet so please report back if anything goes wrong with JB ROMs... Thank you !
NOTE : If you are interested in my work and download my files, please report back AND hit my THANKS button if you think i deserve it ! Thank you !​
PS : TWRP for TF300T is available as two separate download categories : STABLE & DEV branches ! The DEV branch is based off the stable one and is including features that are not available in the STABLE one yet (as upstream merged commits...) ! So the DEV branch is as stable as the STABLE one except for currently previewed features...
Have fun with it :good:​
XDA:DevDB Information
TWRP for TF300T/TF201 [UNOFFICIAL], Tool/Utility for the Asus Transformer TF300T
Contributors
ne0zone75, lj50036
Version Information
Status: Stable
Current Stable Version: STABLE
Current Beta Version: DEV
Created 2014-06-04
Last Updated 2015-02-23

Reserved

ALL my TWRP for TF300T builds are now updated to v2.7.1.0 !
Hello all,
Today i am releasing TWRP 2.7.1.0 builds for both STABLE and DEV branches. Both download sources links (Dev-Host on post number 1 and xda downloads tab) are now updated :good:
You will find TWRP 2.7.1.0 changelog below (grabbed from official TeamWin website) :
What's new in 2.7.1.0:
Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. You will find this option under Wipe -> Advanced Wipe, then select only one partition and then press the Repair or Change File System button. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
Various bugfixes to backup and restore
Improvements to USB storage handling
Added a class to search for files to make finding the correct brightness file automatic in most cases
Various other bugfixes and tweaks
Click to expand...
Click to collapse
Best regards

questions
When go to change file system dont appear f2fs only ext2,3,4 and fat and exfat. What should i do to convert to f2fs? should i convert system and data?
tks

nuno407 said:
When go to change file system dont appear f2fs only ext2,3,4 and fat and exfat. What should i do to convert to f2fs? should i convert system and data?
tks
Click to expand...
Click to collapse
Good afternoon,
F2FS is not supported at all in my TWRP builds for TF300T ATM (kernel side and recovery side) because i really do not know if it is possible to implement F2FS to the CyanogenMod's kernel for TF300T that i am using for compiling the recovery (linux kernel v3.1).
Stay tuned !
Sent from my TF701T

ne0zone75 said:
Good afternoon,
F2FS is not supported at all in my TWRP builds for TF300T ATM (kernel side and recovery side) because i really do not know if it is possible to implement F2FS to the CyanogenMod's kernel for TF300T that i am using for compiling the recovery (linux kernel v3.1).
Stay tuned !
Sent from my TF701T
Click to expand...
Click to collapse
Hey all,
We over at team crombi are working hard to get a CM and Asus based f2fs kernel....
Here is my github of the source code as this one is stock Asus the CM kernel is based off the same thing....
https://github.com/monolithic-droid...mmit/1f898d5b3e15a5681cf4bdfa5c5e3576475d89bd
You are more then welcome to try it out, like I said it needs more testing....
Thx Josh

@ne0zone75 interesting you have 2.7.1.0 working. If i would it from my Omni source tree i get a distorted screen.
Did you change anything in the BoardConfig.mk ?

scanno said:
@ne0zone75 interesting you have 2.7.1.0 working. If i would it from my Omni source tree i get a distorted screen.
Did you change anything in the BoardConfig.mk ?
Click to expand...
Click to collapse
Absolutely not... i am using usual build flags BUT i am picking up recovery dock keyboard layout from local recovery tree instead of device's one... that is the only thing i have recently changed in ' .mk'.
With that said, i am building TWRP along with CM 11.0 sources tree (there is no init.recovery.rc) and i am using 'Official Linaro GCC' v4.7 for recovery + kernel.
Kind regards
Sent from my GT-I9195

scanno said:
@ne0zone75 interesting you have 2.7.1.0 working. If i would it from my Omni source tree i get a distorted screen.
Did you change anything in the BoardConfig.mk ?
Click to expand...
Click to collapse
What do you mean by distorted ?
Do you see two images or does the image slant ?
Thx Josh

lj50036 said:
What do you mean by distorted ?
Do you see two images or does the image slant ?
Thx Josh
Click to expand...
Click to collapse
I am not a native English speaker, so I do not understand what you exactly mean with slant. Only half of the screen is used and it looks like the image is pressed together on the y axes and stretched on the X axes.
The lines are not clear (interlaced)

scanno said:
I am not a native English speaker, so I do not understand what you exactly mean with slant. Only half of the screen is used and it looks like the image is pressed together on the y axes and stretched on the X axes.
The lines are not clear (interlaced)
Click to expand...
Click to collapse
That is very odd... I am sure you are aware of this flag??
RECOVERY_GRAPHICS_USE_LINELENGTH := true -- fixes slanty looking graphics on some devices
Thx Josh

F2FS functionality added to DEV branch ! Update released !
Good afternoon,
I've implemented F2FS ONLY in the DEV branch,... after all this is a testing branch !
To achieve this i've used @lj50036 (from CROMBi-kk team : thank you for your work !) F2FS enabled kernel for TF300T as the kernel of the recovery : THIS PART IS EXPERIMENTAL ! Then i turned ON F2FS support while building the recovery (dedicated TWRP build flag...).
Dev-Host download links are now updated for the DEV branch on post number 1 !
Any feedback on it will be very appreciated BUT please, be very carefull if you decide to test it out ! Thank you !
NB : In order to be able to back F2FS partitions up AND to restore them as F2FS, you will have to back them up when they are already F2FS formatted and after having filled them with data : a backed up EXT4 partition CANNOT BE restored as F2FS and reciprocally !
Very kind regards
PS : F2FS filesystem by itself is probably NOT compatible with crypto ! Please DO NOT TRY to use crypto over F2FS ! Thank you...

iI it possible to iuse this recovery on Memopad HD7 (ME173X)?

bovirus said:
iI it possible to iuse this recovery on Memopad HD7 (ME173X)?
Click to expand...
Click to collapse
Hello,
I will check this out and give you an answer ASAP
Greetings
Sent from my GT-I9195

I asked that because someone explain how to unlock Memopad HD7 and how to load the recovery.
The unlock app it's the same for TFT300
The recovery point to a downlaod link of a file for TF300T
Asus Memopad
Unlock (YouTube vdieo): https://www.youtube.com/watch?v=JUeLp6hkvs0
Asus Unlock APK (v8): http://fs1.d-h.st/download/00033/86c/Unlock_v8.rar
TWRP mod: http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.5.0.0-tf300t-4.2.blob
What's TWRP blob file?
Thanks.

bovirus said:
I asked that because someone explain how to unlock Memopad HD7 and how to load the recovery.
The unlock app it's the same for TFT300
The recovery point to a downlaod link of a file for TF300T
Asus Memopad
Unlock (YouTube vdieo): https://www.youtube.com/watch?v=JUeLp6hkvs0
Asus Unlock APK (v8): http://fs1.d-h.st/download/00033/86c/Unlock_v8.rar
TWRP mod: http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.5.0.0-tf300t-4.2.blob
What's TWRP blob file?
Thanks.
Click to expand...
Click to collapse
Hey mate your in the wrong forum...
You need to start your our, in general and ask for help there not here ...
Its OK that you ask if this recovery would work on your tablet, but this is not a help thread....
Thx Josh

I have both TF300T and Asus Memopad HD7
I already check in ME173X thread and I didn't find any info about recovery.
On internet I found link (posted before) that the recovery for TF300T should be OK for other Asus devices (the bootloader unlock is the same...).
To explain that (not to ask help) I posted the link in previous post.
For this reason i asked it in this thread about TWRP device compatibility.
I believe that could be intersting also for developper if this recovery works with other device to add the device name into the list.
Because if it's true the title can contains also Asus Memopad HD7.
I didn't ask a support about ME173X but just only this specifc recovery.

bovirus said:
I have both TF300T and Asus Memopad HD7
I already check in ME173X thread and I didn't find any info about recovery.
On internet I found link (posted before) that the recovery for TF300T should be OK for other Asus devices (the bootloader unlock is the same...).
To explain that (not to ask help) I posted the link in previous post.
For this reason i asked it in this thread about TWRP device compatibility.
I believe that could be intersting also for developper if this recovery works with other device to add the device name into the list.
Because if it's true the title can contains also Asus Memopad HD7.
I didn't ask a support about ME173X but just only this specifc recovery.
Click to expand...
Click to collapse
Do not worry ! Like i already said i will check your device's compatibility out with my TWRP builds (TF201 is, ME301T seems to...) ASAP BUT i am quite busy ATM...
Now, if it is the case, it will be up to you to unlock your bootloader and then flash the recovery on your own, according to your device's needs and i do think that @lj50036 was meaning that...
Best regards
Sent from my GT-I9195

What do you to add this instruction to help to flash custom recovery first time
- Download the following files and save them to your PC http://www.mediafire.com/?4dx982z93w8z7wk
- Downlaod the TWRP recovery
- Extract the Fastboot.zip file and place the extracted files inside a single folder. You should acquire 4 files, namely:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
- Expand TWRP recovery archive file and rename the downloaded TWRP file as recovery.img (for easier reference).
- Copy or move the recovery.img file to where fastboot.exe is located. You should have a total of 5 files by now.
- Switch off your tablet.
- Boot into Fastboot Mode by pressing and holding down the [Power] and [Volume Down] buttons until you see the message “Press Vol Up to enter RCK”.
- Release the buttons when you see this message and wait for about 5 seconds. A new menu appears. Press the [Volume Down] button to select the USB icon, then press the [Volume Up] button to confirm your selection within 10 seconds, or else your tablet boots into Normal Mode.
- Connect your tablet to your PC via USB cable. Pelase check theat tehd evice is right rcognzied (you should install Asus USB driver)
- On your PC, go to the Fastboot folder and open a command prompt window. You can do this by pressing the Shift key on your keyboard and right-clicking on the empty white space inside the folder, then selecting “Open command prompt here” from the context menu.
- Enter the following command at the command prompt to install TWRP Recovery.
fastboot -i 0x0B05 flash recovery recovery.img
- After installing, disconnect your tablet and reboot.
fastboot reboot

@bovirus
Good morning,
Have you successfully tried this solution for yourself ?!
Now ! Before posting any external download link in MY thread, PLEASE refer to me over PM before doing so ! :angel:
Thank you !
Sent from my GT-I9195

[TOOL] SRK Tool 2.1 [ROOT/UNBRICK/UTILITY/BACKUP]- 20150507

I don't respond for What-So-Ever done any damage to your Phone, You must accept this risk with yourself..
Hi all,
I'm proud to present my useful tools. SRK Tool ,it's a tools for noob and advance user.This tool is connecting between LG G2 and computer that is a reason you must Enable USB Debugging mode befor use SRKTool
If you like my work , you can donate me with my email in paypal
My email : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link SRKtool_2.1_droidth.zip:
SRKtool_2.1_droidth.zip
Download link SRKtool_2.0.2_droidth.zip:(Require SRK Tool 2.0 and 2.0.1)
SRKtool_2.0.2_droidth.zip
Download link SRKtool_2.0.1_droidth.zip: (Require SRK Tool 2.0)
SRKtool_2.0.1_droidth.zip
Little update small size.Please download then unzip SRKtool_2.0.1_droidth.zip copy all files into SRKtool_2.0._droidth Folder.
Run srktool201.exe for start SRKtool 2.0.1
Download link SRKtool_2.0_droidth.zip:
SRKtool_2.0_droidth.zip
Download link SRKtool_1.0.5_droidth.zip:
SRKtool_1.0.5_droidth.zip
Download link SRKtool_1.0.4_droidth.zip:
SRKtool_1.0.4_droidth.zip
Download link SRKtool_1.0.3_droidth.zip:
SRKtool_1.0.3_droidth.zip
Download link SRKtool_1.0.2_droidth.zip:
SRKtool_1.0.2_droidth.zip
Change logs:
2.1
- Add Unbrick (qhsusb_bulk) 9006 for VS980
- Merg to only zip (Not require previous version)
- Add Other Utility>Port checking
2.0.2 (Require SRK Tool 2.0 and 2.0.1)
- Add Manual Root
- Fix Unbrick (qhsusb_bulk) missing file recovery LS980
2.0.1 (small size) (Require SRK Tool 2.0)
- Fix same bug for F320 S/K/L (fastboot boot recovery)
- Remove cust.bin from Fixed fastboot mode started.
- Adding change logs section into program
2.0
- Unbrick (qhsusb_bulk) (D800/1/2/5,F320S/L/K,L22,LS980)
1.0.5
ROOT
- ROOT+TWRP For F320S/L/K
BACKUP
- Backup Sensor
- Backup Cust
- Backup All importance partition
Utility
- Nuke Download Mode - (When No Recovery,Can't Boot)
- Fix Recovery Mode - via fastboot mode (When No Recovery,Can't Boot) (ALL Variant)
Other
- Change 7z to 7-Zip Extra (Highest compression ratio/Fast compression) Support 32bit/64bit Windows
1.0.4
- Send Command (Spacial Mode for fix device)- NEED DOWNLOAD MODE.
- New Bump Kernel (30e) for D802
- Fix bug and improving program Make it's stable
- Redegin UI Program
1.0.3
- Adding Fix fastboot mode started
- How to Flash KDZ/TOT/Extract KDZ
- Check current firmware
- Link to firmware KDZ warehouse
1.0.2
- Adding feature ROOT+TWRP for LGG3 F400S
- Adding ADB Sideload for install ROM
- VDO Recording screen
- Screen Capture
- Reboot Device
- Update adb to the newest version
1.0.1
- Adding feature ROOT+TWRP for LGG3 D855
1.0
- initial version
Click to expand...
Click to collapse
How to use
1. ROOTED phone require
2. Enable USB Debugging mode
3. Plug device into Computer
4. Run srktool
5. Enjoy
Screen Shot
VDO-HOW TO UNBRICK
XDA:DevDB Information
SRK Tool, Tool/Utility for the LG G2
Contributors
somboons
Version Information
Status: Stable
Current Stable Version: 2.1
Stable Release Date: 2015-05-07
Created 2015-04-20
Last Updated 2016-09-14

Amazing, this will surely help alot of peaple.

Please feedback to me or request featurt that can use adb shell I will adding in next build.

somboons said:
Please feedback to me or request featurt that can use adb shell I will adding in next build.
Click to expand...
Click to collapse
Maybe add the option to push files to the phone using adb, usefull under certain circumstances.

It can use in G3 too.

Thank you so much. " So A Mu"

update tool

Khop koon krap!

update tool to 1.0.2

on v 1.0.2 f320 user report me back they have brick after select menu2. I have to remove from thread go back to v1.0.1

Error
in the option 11, i have received this error:
Error:
7-zip cannot find the code that works with archives!.
done!
the .img was created, but not the zip.
thank's for your work!

Dr.C4nGr1 said:
in the option 11, i have received this error:
Error:
7-zip cannot find the code that works with archives!.
done!
the .img was created, but not the zip.
thank's for your work!
Click to expand...
Click to collapse
Same here, also doesn't remove the system.img from sdcard and i cant remove it.

iFEARR said:
Same here, also doesn't remove the system.img from sdcard and i cant remove it.
Click to expand...
Click to collapse
I think , I will modify code after backup system.IMG maybe we have to manual copy system.IMG to computer then manual zip because adb pull it take a long time.

But why it doesn't let me delete the system.img from sdcard ? I've tried 2 file explorers and none worked, only the TWRP's file manager let delete the file, why ?

iFEARR said:
But why it doesn't let me delete the system.img from sdcard ? I've tried 2 file explorers and none worked, only the TWRP's file manager let delete the file, why ?
Click to expand...
Click to collapse
Can you delete other files?

Well apparently I can't delete files from sdcard root folder wtf ?
http://i.imgur.com/Puy0p11.png

iFEARR said:
Well apparently I can't delete files from sdcard root folder wtf ?
http://i.imgur.com/Puy0p11.png
Click to expand...
Click to collapse
Install SElinux Change mode then enabla PassiveMode

Now works, thanks!

update
1.0.2
- Adding feature ROOT+TWRP for LGG3 F400S
- Adding ADB Sideload for install ROM
- VDO Recording screen
- Screen Capture
- Reboot Device

somboons said:
I think , I will modify code after backup system.IMG maybe we have to manual copy system.IMG to computer then manual zip because adb pull it take a long time.
Click to expand...
Click to collapse
I fix the 7z problem, just copy this archive ( https://www.dropbox.com/sh/9fvrngc0y0nvywr/AAAsY2XaP2PwQawBXhrEyNFZa?dl=0 ) in command/ and replace 7z.exe, now works for me!

Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial

In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset.
from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool.
with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa).
MTK-bypass credits to @k4y0z
, @chaosmaster and @xyzz on github.
REQUIREMENTS:
• Python
Download Python
The official home of the Python Programming Language
www.python.org
• libusb-win32
https://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-devel-filter-1.2.6.0.exe/download
• Sp Flashtool
SP Flash Tool Download All versions for MediaTek Devices
SP Flash tool download is the best application to flash Stock firmware, Custom recovery and fix some extreme issues on MediaTek Android smartphones. Download SP Flash tool all versions from our official download page.
spflashtool.com
• Bypass Utility Compiled
18.9 KB file on MEGA
mega.nz
---------------------------------------------------------------
• Bypass Utility Latest Releases
Release 1.4.1 · MTK-bypass/bypass_utility
Improve handshake reliability
github.com
• Exploits Latest Releases
Release 1.5 · MTK-bypass/exploits_collection
mt6261 mt6572 mt6580 mt6582 mt6735 mt6737 mt6739 mt6755 mt6757 mt6761 mt6763 mt6765 mt6768 mt6771 mt6785 mt6799 mt6873 mt8127 mt8163 mt8173 mt8695
github.com
• Realme 3 (rmx1821) Flashtool Firmware link soon
> I will upload the realme 3 firmware with Scatter File and Auth File for Third Party Flashtool like SP Flashtool soon, but if you have an official firmware of realme 3 with Scatter and Auth File you can use it no matter what version it is.
> If you know how to extract an OFP file, you can download this realme 3|3i firmware and extract the OFP file.
https://fileload.coloros.com/30842RMX1821EX_11_C.17_201117_cb5665f2.zip
> Video Tutorial on how to Extract OPPO | REALME firmware (OFP file)
VIDEO TUTORIAL
TEXT TUTORIAL
INSTALLATION:
• Install Python (tick checkbox "Add Python X.X to PATH") and proceed.
( if you are using windows 10, Download and Install Python 3.9 through Microsoft Store )
• Install lib-usb_win32
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click Next>Next> until you see the next image
Click Finish and Launch Lunch Filter Wizard
Choose the "Install a device filter" and click next
You will see this device selection.
Now you will need to connect you phone with power off to computer.
> Hold all the buttons and connect to the computer (wait until you see Mediatek USB Port in libusb Device selection and Install)
(note: you have to select and install it very quick, because the phone disconnect in just a few seconds)
> Wait until it shows this (Click OK and close libusb and Disconnect your phone)
INITIALIZATION:
• Extract Bypass Utility, and go to extracted folder
> type "cmd" in the address bar and hit enter
> in cmd console install (Install pyusb, pyserial, json5)
by typing: pip install pyusb pyserial json5
> after that bypass mtk
by typing: python main.py
> when you see "Waiting for bootrom" , you need to connect your phone again (Holding all button and plug it into your computer and wait until it recognized.)
you should have this following output. do not close this window and remember the Found port of you phone
as you can see my port is = COM7
DO NOT DISCONNECT YOUR PHONE FROM COMPUTER THIS TIME
FLASHING FIRMWARE:
• Extract SP Flashtool and Realme 3 Firmware
• Open flashtool.exe and click Options>Connection
and tick AURT instead of USB.
Select the COM port of the phone which is COM7 in my case
then close Option Window
• Now In Flashtool choose Scatter-File from the Extracted Firmware of Realme 3
(wait until it finished the Processing)
• After that choose Authentication File
• After loading Scatter and Auth File Click Download
It should start downloading the firmware to you phone now without any error.
(wait until it finished the download.)
When finished downloading you get a check windows indicating that the flash was successful!
Thats it Congratulations! You may now disconnect your phone from your computer and POWER ON.
your DEAD [HardBricked] Realme 3 is now Alive!
(Note: This method is applicable to any MTK devices with SoC mt6735, mt6750, mt6765, mt6771, mt6785, mt8127, mt8163, mt8173, mt8695)
For more updates about MTK-Bypass visit the official github page @
MTK-bypass
MTK-bypass has 8 repositories available. Follow their code on GitHub.
github.com
all the tools and utility is not mine. credits to the developer.
Original Bypass Tool xdaThread
[MOD][DEV] MediaTek / MTK - Auth Bypass (SLA/DAA) - Utility
As some of you have already noticed, a couple of weeks ago @Dinolek and I published a utility, that allows bypassing authentication on MTK devices. The tool is based on an exploit dubbed kamakiri, which was originally found by @xyz` and released...
forum.xda-developers.com
special thanks to @popoff-r for mentioning about a thread of repairing MTK devices.

Thanks

fawazahmed0 said:
Thanks
Click to expand...
Click to collapse
so its you , i thought the two in the credits in your github bypass_utility is one who develop it. im sorry sir. im not really familliar where to see the owner of the work it github. im really sorry for not mentioning your name in this. gotta edit now. You are Great sir!

ATDteam said:
so its you , i thought the two in the credits in your github bypass_utility is one who develop it. im sorry sir. im not really familliar where to see the owner of the work it github. im really sorry for not mentioning your name in this. gotta edit now. You are Great sir!
Click to expand...
Click to collapse
Thank you for putting this altogether, this should speed up the development work for this phone(kernel etc), as people don't have to go to service center for hard brick.
Also I want to tell you, I shouldn't get the credits for bypass_utility, the two people you mentioned should be getting the credits, I just forked(copy/cloned) the repository.
I assume you are new to github, anyone can fork(copy/clone) a repository by clicking on fork button
You can differentiate whether a repository is forked(copied) or original by seeing on the top left side.
Thanks

fawazahmed0 said:
Thank you for putting this altogether, this should speed up the development work for this phone(kernel etc), as people don't have to go to service center for hard brick.
Also I want to tell you, I shouldn't get the credits for bypass_utility, the two people you mentioned should be getting the credits, I just forked(copy/cloned) the repository.
I assume you are new to github, anyone can fork(copy/clone) a repository by clicking on fork button
View attachment 5205247
You can differentiate whether a repository is forked(copied) or original by seeing on the top left side.
View attachment 5205251
Thanks
Click to expand...
Click to collapse
Thank you so much that was a very helpful information.

How to fix this error sir..

What Error?, please provide screenshot of the error, if you can't explain it.

ATDteam said:
What Error?, please provide screenshot of the error, if you can't explain it.
Click to expand...
Click to collapse
Tihis sir

What Error?, please provide screenshot of the error, if you can't explain it.
Al Djufri said:
Tihis sir
View attachment 5207505
Click to expand...
Click to collapse
try to uninstall python and reinstall again, also download the bypass_utility, the one that i attached in this thread.
and try again. make sure your usb cable is working properly, it seems that your device does not read properly by the utility. change your cable if posible. Download python 3.9, if still doest work. try using windows 10 OS.
18.9 KB file on MEGA
mega.nz

ATDteam said:
What Error?, please provide screenshot of the error, if you can't explain it.
try to uninstall python and reinstall again, also download the bypass_utility, the one that i attached in this thread.
and try again. make sure your usb cable is working properly, it seems that your device does not read properly by the utility. change your cable if posible. Download python 3.9, if still doest work. try using windows 10 OS.
18.9 KB file on MEGA
mega.nz
Click to expand...
Click to collapse
Reinstalling python
Reinstalling lib libusb
Changing usb cable
Changing port usb
Change pc, i mean borrow a pc from my friend
Changing spflashtool, same problem sir?
Do you have telegram account

thanks it works thanks for saving my phone

Its not the same in your first screenshot you reach "Disabling protection" but in the 2nd one only the utility found your phone..., did you release all the buttons emmidiately after your computer detects your phone phone? It is important that you release emmidiately. Did you try to use windows 10.? Sorry I dont have telegram.
Al Djufri said:
Reinstalling python
Reinstalling lib libusb
Changing usb cable
Changing port usb
Change pc, i mean borrow a pc from my friend
Changing spflashtool, same problem sir?
Do you have telegram accountView attachment 5208303
Click to expand...
Click to collapse

XxRRSxX said:
thanks it works thanks for saving my phone
Click to expand...
Click to collapse
Thanks for using this thread as your guide, but credits is to the developers of the Utility.

ATDteam said:
Its not the same in your first screenshot you reach "Disabling protection" but in the 2nd one only the utility found your phone..., did you release all the buttons emmidiately after your computer detects your phone phone? It is important that you release emmidiately. Did you try to use windows 10.? Sorry I dont have telegram.
Click to expand...
Click to collapse
I'm trying to with my friend pc(windows 10) using latest python and same error sir..
Always Immediately release my button when pc detection my device.. but same error

( SOLVED )
you must be use windows 10
Use latest python version
Use latest SpFlash tool version
And don't forget to chek libusb instalation
Check via cmd "pip install libusb" and "pip install libusb1"
And try to use command "python main.py"
Sorry for my English..
Thanks sir..

Al Djufri said:
( SOLVED )
you must be use windows 10
Use latest python version
Use latest SpFlash tool version
And don't forget to chek libusb instalation
Check via cmd "pip install libusb" and "pip install libusb1"
And try to use command "python main.py"
Sorry for my English..
Thanks sir..
View attachment 5208681
Click to expand...
Click to collapse
Nice thats great! sometimes you really need to be on Trial and Error before you achieve what you want. happy for you. Thank you for using my thread as guide, Credits to the developers of the utility. and you have a good english. mine is bad. :-D

Anyone who facing problem when bootrom check, you have to flash first time or it will show error. Otherwise you have to uninstall and reinstall libusb.exe and others.

Ok, thanks to ATDTEAM, very much, I bricked by patching boot image with magisk and flashing it, successfully flashed stock rom .ofp with SP Flash tool, not only this , I itentionally flashed another version , and it worked to, thnx to the bypass utility, it generates questions, the realme provides ozip files, so where are .ofp files coming from, or where we can get it, and... Fawazahmed0 , I am unable to flash twrp, I tried everything I could, I am on updated Android 10 c.19 now, so I can't flash custom recovery or root it... I can't even rollback bcoz I unable to find the older version ofp files, the ozip files just don't install, so please help for rooting Android 10, You have solved a major hurdle by introducing the method of bypass sp tool flashing but, the next step of flashing custom recovery and then rooting awaits... Pls help/ guide, Thnx...

Thanks brother, I've recently unbricked my device