is it safe to fullow this tutorial - Upgrading, Modifying and Unlocking

i have a teclast M20 4G M3K4 and I would like to root it found a link on the internet that explains how to do this would like your opinions
canot post link because i have no rights
AIDA64 for Android v1.66 Repo
<<< System >>>
Device Model: Teclast M20 4G
Device Type: Tablet
Manufacturer: techain
Model: M20_4G
Brand: Teclast
Board: mt6797
Device: M20_4G
Hardware: mt6797
Platform: mt6797
Product: M20_4G
Installed RAM: 4 GB LPDDR3
Total Memory: 3682 MB
Available Memory: 1887 MB
Internal Storage Total Space: 53.43 GB
Internal Storage Free Space: 49.40 GB
External Storage Total Space: 29.80 GB
External Storage Free Space: 21.95 GB
Bluetooth Version: 4.0
Device Features: android.hardware.audio.low_latency
android.hardware.audio.output
android.hardware.bluetooth
android.hardware.bluetooth_le
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.autofocus
android.hardware.camera.front
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.opengles.aep
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.telephony
android.hardware.telephony.cdma
android.hardware.telephony.gsm
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.vulkan.level
android.hardware.vulkan.version
android.hardware.wifi
android.hardware.wifi.direct
android.software.activities_on_secondary_displays
android.software.app_widgets
android.software.autofill
android.software.backup
android.software.companion_device_setup
android.software.connectionservice
android.software.cts
android.software.device_admin
android.software.home_screen
android.software.input_methods
android.software.live_wallpaper
android.software.managed_users
android.software.midi
android.software.picture_in_picture
android.software.print
android.software.voice_recognizers
android.software.webview
<<< CPU >>>
SoC Model: MediaTek Helio X20 (MT6797)
Core Architecture: 4x ARM Cortex-A53 @ 1391 MHz
4x ARM Cortex-A53
2x ARM Cortex-A72
Manufacturing Process: 20 nm
Instruction Set: 64-bit ARMv8-A
CPU Revision: r0p1
CPU Cores: 10
CPU Clock Range: 221 - 1391 MHz
Core 1 Clock: 1118 MHz
Core 2 Clock: 1118 MHz
Core 3 Clock: 1118 MHz
Core 4 Clock: (sleeping)
Core 5 Clock: (sleeping)
Core 6 Clock: (sleeping)
Core 7 Clock: (sleeping)
Core 8 Clock: (sleeping)
Core 9 Clock: (sleeping)
Core 10 Clock: (sleeping)
Scaling Governor: interactive
Supported ABIs: arm64-v8a, armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
Supported 64-bit ABIs: arm64-v8a
AES: Supported
NEON: Supported
SHA1: Supported
SHA2: Supported
<<< Display >>>
Screen Resolution: 2560 × 1600
Technology: IPS LCD
Screen Size: 218 mm × 136 mm
Screen Diagonal: 10.1 inches
Pixel Density: 299 dpi (xhdpi)
xdpi / ydpi: 320 / 320 dpi
GPU Vendor: ARM
GPU Renderer: Mali-T880
Refresh Rate: 57 Hz
Default Orientation: Landscape
OpenGL ES Version: 3.2
GPU Version: OpenGL ES 3.2 v1.r20p0-01rel0.d174d1328b67c542941eec67baa38e6a
OpenGL ES Extensions: GL_EXT_debug_marker
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth24
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_OES_packed_depth_stencil
GL_OES_rgb8_rgba8
GL_EXT_read_format_bgra
GL_OES_compressed_paletted_texture
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_image_external_essl3
GL_OES_EGL_sync
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_required_internalformat
GL_OES_vertex_array_object
GL_OES_mapbuffer
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_rg
GL_EXT_texture_type_2_10_10_10_REV
GL_OES_fbo_render_mipmap
GL_OES_element_index_uint
GL_EXT_shadow_samplers
GL_OES_texture_compression_astc
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_KHR_texture_compression_astc_sliced_3d
GL_KHR_debug
GL_EXT_occlusion_query_boolean
GL_EXT_disjoint_timer_query
GL_EXT_blend_minmax
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_OES_texture_3D
GL_EXT_texture_storage
GL_EXT_multisampled_render_to_texture
GL_OES_surfaceless_context
GL_OES_texture_stencil8
GL_EXT_shader_pixel_local_storage
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_ARM_mali_program_binary
GL_EXT_sRGB
GL_EXT_sRGB_write_control
GL_EXT_texture_sRGB_decode
GL_EXT_texture_sRGB_R8
GL_EXT_texture_sRGB_RG8
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_OES_texture_storage_multisample_2d_array
GL_OES_shader_image_atomic
GL_EXT_robustness
GL_EXT_draw_buffers_indexed
GL_OES_draw_buffers_indexed
GL_EXT_texture_border_clamp
GL_OES_texture_border_clamp
GL_EXT_texture_cube_map_array
GL_OES_texture_cube_map_array
GL_OES_sample_variables
GL_OES_sample_shading
GL_OES_shader_multisample_interpolation
GL_EXT_shader_io_blocks
GL_OES_shader_io_blocks
GL_EXT_tessellation_shader
GL_OES_tessellation_shader
GL_EXT_primitive_bounding_box
GL_OES_primitive_bounding_box
GL_EXT_geometry_shader
GL_OES_geometry_shader
GL_ANDROID_extension_pack_es31a
GL_EXT_gpu_shader5
GL_OES_gpu_shader5
GL_EXT_texture_buffer
GL_OES_texture_buffer
GL_EXT_copy_image
GL_OES_copy_image
GL_EXT_shader_non_constant_global_initializers
GL_EXT_color_buffer_half_float
GL_EXT_color_buffer_float
GL_EXT_YUV_target
GL_OVR_multiview
GL_OVR_multiview2
GL_OVR_multiview_multisampled_render_to_texture
GL_KHR_robustness
GL_KHR_robust_buffer_access_behavior
GL_EXT_draw_elements_base_vertex
GL_OES_draw_elements_base_vertex
<<< Network >>>
<< Telephony >>
Phone Type: GSM
Network Operator Name: Oi
Network Operator Code: 72431
Network Operator Country: Brazil
SIM Provider Name: Oi
SIM Provider Code: 72431
SIM Provider Country: Brazil
SIM State: Ready
Network Type: EDGE
Data Connection State: Disconnected
Data Activity: None
Device Is Roaming: No
ICC Card: Present
<< Wi-Fi >>
State: Enabled
SSID: "casa1"
BSSID: ec:08:6b:e0:3e:e7
Hidden SSID: No
IPv4 Address: 192.168.1.102
IPv6 Address: fe80::200:3ff:fe22:28f9
Signal Strength: -70 dBm (Good)
Link Speed: 52 Mbps
Frequency: 2457 MHz
Network ID: 0
Gateway: 192.168.1.1
Netmask: 255.255.255.0
DNS1: 8.8.8.8
DNS2: 8.8.4.4
DHCP Lease Duration: 24 hours
5 GHz Band: Supported
Wi-Fi Aware: Not Supported
Wi-Fi Direct: Supported
<<< Battery >>>
Power Source: Battery
Level: 50 %
Status: Not Charging
Health: Good
Technology: Li-ion
Temperature: 25.0°C
Voltage: 3.765 V
Charge Counter: 6400 mAh
Discharge Rate: 533 mA
Capacity: 6600 mAh
<<< Android >>>
Android Version: 8.0.0 (Oreo)
API Level: 26
Android Security Patch Level: 2018-06-05
Rooted Device: No
Android ID: b640aeefa323aa7e
Baseband: MOLY.LR11.W1630.MD.MP.V67.2, 2018/04/02 17:50
Build ID: V1.02_20190223
Codename: REL
Fingerprint: CHUWI/Hi9Air/Hi9Air:8.0.0/O00623/1520042099:user/release-keys
ID: O00623
Incremental: 1520042099
Java Runtime Version: Android Runtime 0.9
Java VM Version: ART 2.1.0
Java VM Heap Size: 384 MB
Kernel Architecture: aarch64
Kernel Version: 3.18.60
Tags: release-keys
Type: user
Google Play Services Version: 19.6.29 (040406-278422107)
Huawei Mobile Services Version: < Not Present >
OpenSSL Version: OpenSSL 1.0.2 (compatible; BoringSSL)
ZLib Version: 1.2.8
ICU CLDR Version: 30.0.3
ICU Library Version: 58.2
ICU Unicode Version: 9.0
Android Language: English (United States)
Configured Time Zone: Brasilia Standard Time (UTC-03:00)
UpTime: 01:08:50
<<< Devices >>>
<< Rear-Facing Camera >>
Resolution: 5.0 MP (2592 × 1944)
Focal Length: 3.50 mm
Focus Modes: auto, macro, infinity, continuous-picture, continuous-video
Video Stabilization: Supported
Zoom: Supported
Auto Exposure Locking: Supported
Auto White Balance Locking: Supported
Flash: Not Supported
<< Front-Facing Camera >>
Resolution: 2.1 MP (1920 × 1088)
Focal Length: 3.50 mm
Focus Modes: fixed, infinity
Video Stabilization: Supported
Zoom: Supported
Auto Exposure Locking: Supported
Auto White Balance Locking: Supported
Flash: Not Supported
<< Vulkan Device - Mali-T880 >>
Device Name: Mali-T880
Device Type: Integrated GPU
Device UUID: C5-18-34-CB-95-43-3E-BE-3B-53-73-BF-A4-4B-EC-E2
Device ID: 000013B5-08801008
Memory Size: 3768076 KB
Max 1D Image Size: 8192
Max 2D Image Size: 8192 x 8192
Max 3D Image Size: 4096 x 4096 x 4096
Max Cube Image Size: 8192 x 8192
Max Image Layers: 256
Max Texel Buffer Elements: 65536
Max Uniform Buffer Range: 65536
Max Storage Buffer Range: 134217728
Max Push Constants Size: 128 bytes
Buffer Image Granularity: 4 KB
Max Bound Descriptor Sets: 4
Max Per-Stage Descriptor Samplers: 128
Max Per-Stage Descriptor Uniform Buffers: 12
Max Per-Stage Descriptor Storage Buffers: 4
Max Per-Stage Descriptor Sampled Images: 16
Max Per-Stage Descriptor Storage Images: 4
Max Per-Stage Descriptor Input Attachments: 4
Max Per-Stage Resources: 44
Max Descriptor Set Samplers: 768
Max Descriptor Set Uniform Buffers: 72
Max Descriptor Set Dynamic Uniform Buffers: 8
Max Descriptor Set Storage Buffers: 24
Max Descriptor Set Dynamic Storage Buffers: 4
Max Descriptor Set Sampled Images: 96
Max Descriptor Set Storage Images: 24
Max Descriptor Set Input Attachments: 4
Max Vertex Input Attributes: 16
Max Vertex Input Bindings: 16
MaxVertex Input Attribute Offset: 2047
Max Vertex Input Binding Stride: 2048
Max Vertex Output Components: 128
Max Tesselation Generation Level: 64
Max Tesselation Patch Size: 32
Max Tesselation Control Per-Vertex Input Components: 64
Max Tesselation Control Per-Vertex Output Components: 64
Max Tesselation Control Per-Patch Output Components: 120
Max Tesselation Control Total Output Components: 2048
Max Tesselation Evaluation Input Components: 64
Max Tesselation Evaluation Output Components: 64
Max Geometry Shader Invocations: 32
Max Geometry Input Components: 64
Max Geometry Output Components: 128
Max Geometry Output Vertices: 256
Max Geometry Total Output Components: 1024
Max Fragment Input Components: 128
Max Fragment Output Attachments: 4
Max Fragment Combined Output Resources: 12
Max Compute Shared Memory Size: 32 KB
Max Compute Work Group Count: X: 65536, Y: 65536, Z: 65536
Max Compute Work Group Invocations: 256
Max Compute Work Group Size: X: 256, Y: 256, Z: 256
Subpixel Precision Bits: 8
Subtexel Precision Bits: 8
Mipmap Precision Bits: 8
Max Draw Indexed Index Value: 4294967295
Max Draw Indirect Count: 1
Max Sampler LOD Bias: 2.000000
Max Sampler Anisotropy: 1.000000
Max Viewports: 1
Max Viewport Size: 8192 x 8192
Viewport Bounds Range: -16384.000000 ... 16383.000000
Min Memory Map Alignment: 64 bytes
Min Texel Buffer Offset Alignment: 256 bytes
Min Uniform Buffer Offset Alignment: 16 bytes
Min Storage Buffer Offset Alignment: 256 bytes
Min / Max Texel Offset: -8 / 7
Min / Max Texel Gather Offset: -8 / 7
Min / Max Interpolation Offset: -0.500000 / 0.500000
Subpixel Interpolation Offset Bits: 4
Max Framebuffer Size: 8192 x 8192
Max Framebuffer Layers: 256
Framebuffer Color Sample Counts: 0x00000005
Framebuffer Depth Sample Counts: 0x00000005
Framebuffer Stencil Sample Counts: 0x00000005
Framebuffer No Attachments Sample Counts: 0x00000005
Max Color Attachments: 4
Sampled Image Color Sample Counts: 0x00000005
Sampled Image Integer Sample Counts: 0x00000001
Sampled Image Depth Sample Counts: 0x00000005
Sampled Image Stencil Sample Counts: 0x00000005
Storage Image Sample Counts: 0x00000001
Max Sample Mask Words: 1
Discrete Queue Priorities: 2
Point Size Range: 1.000000 ... 1024.000000
Line Width Range: 1.000000 ... 1.000000
Point Size Granularity: 0.062500
Optimal Buffer Copy Offset Alignment: 64 bytes
Optimal Buffer Copy Row Pitch Alignment: 64 bytes
Non-Coherent Atom Size: 64 bytes
Driver Version: 313.546.569
API Version: 1.0.52
Vulkan Library: /system/lib64/libvulkan.so
Alpha To One: Not Supported
Anisotropic Filtering: Not Supported
ASTC LDR Texture Compression: Supported
BC Texture Compression: Not Supported
Depth Bias Clamping: Supported
Depth Bounds Tests: Not Supported
Depth Clamping: Not Supported
Draw Indirect First Instance: Supported
Dual Source Blend Operations: Not Supported
ETC2 and EAC Texture Compression: Supported
Fragment Stores and Atomics: Supported
Full Draw Index Uint32: Supported
Geometry Shader: Supported
Image Cube Array: Supported
Independent Blend: Supported
Inherited Queries: Not Supported
Large Points: Supported
Logic Operations: Not Supported
Multi-Draw Indirect: Not Supported
Multi Viewport: Not Supported
Occlusion Query Precise: Supported
Pipeline Statistics Query: Not Supported
Point and Wireframe Fill Modes: Not Supported
Robust Buffer Access: Supported
Sample Rate Shading: Supported
Shader Clip Distance: Not Supported
Shader Cull Distance: Not Supported
Shader Float64: Not Supported
Shader Image Gather Extended: Supported
Shader Int16: Supported
Shader Int64: Not Supported
Shader Resource Min LOD: Not Supported
Shader Resource Residency: Not Supported
Shader Sampled Image Array Dynamic Indexing: Supported
Shader Storage Buffer Array Dynamic Indexing: Supported
Shader Storage Image Array Dynamic Indexing: Supported
Shader Storage Image Extended Formats: Not Supported
Shader Storage Image Multisample: Not Supported
Shader Storage Image Read Without Format: Supported
Shader Storage Image Write Without Format: Supported
Shader Tesselation and Geometry Point Size: Not Supported
Shader Uniform Buffer Array Dynamic Indexing: Supported
Sparse Binding: Not Supported
Sparse Residency 2 Samples: Not Supported
Sparse Residency 4 Samples: Not Supported
Sparse Residency 8 Samples: Not Supported
Sparse Residency 16 Samples: Not Supported
Sparse Residency Aliased: Not Supported
Sparse Residency Aligned Mip Size: No
Sparse Residency Buffer: Not Supported
Sparse Residency Image 2D: Not Supported
Sparse Residency Image 3D: Not Supported
Sparse Residency Non-Resident Strict: No
Sparse Residency Standard 2D Block Shape: No
Sparse Residency Standard 2D Multisample Block Shape: No
Sparse Residency Standard 3D Block Shape: No
Standard Sample Locations: Yes
Strict Line Rasterization: Yes
Tesselation Shader: Supported
Timestamps on All Graphics and Compute Queues: Not Supported
Variable Multisample Rate: Not Supported
Vertex Pipeline Stores and Atomics: Not Supported
Wide Lines: Not Supported
Device Extensions: VK_KHR_incremental_present
VK_GOOGLE_display_timing
VK_KHR_maintenance1
VK_KHR_shader_draw_parameters
VK_KHR_swapchain
Instance Extensions: VK_KHR_surface
VK_KHR_android_surface
VK_EXT_swapchain_colorspace
VK_KHR_get_surface_capabilities2
VK_EXT_debug_report
VK_KHR_get_physical_device_properties2
No USB devices found.
No OpenCL devices found.
No CUDA devices found.
No PCI devices found.
<<< Thermal >>>
Battery: 25.0°C
<<< Sensors >>>
ACCELEROMETER:
<<< Apps >>>
AIDA64: com.finalwire.aida64(v1.66)
AnimeDLR: net.android.adm(v6.0.1)
Dashlane: com.dashlane(v6.1946.2-arm64-v8a)
Firefox Nightly: org.mozilla.fenix.nightly(vNightly 191117 06:00)
Rastreador: app.rmayrink.Rastreador_de_Encomendas(v1.9.9)
TuneIn Radio Pro: radiotime.player(v23.2)
WhatsApp: com.whatsapp(v2.19.333)
<<< Codecs >>>
OMX.MTK.AUDIO.DECODER.MP3: audio/mpeg
OMX.MTK.AUDIO.DECODER.GSM: audio/gsm
OMX.MTK.AUDIO.DECODER.RAW: audio/raw
OMX.MTK.AUDIO.DECODER.G711.ALAW: audio/g711-alaw
OMX.MTK.AUDIO.DECODER.G711.MLAW: audio/g711-mlaw
OMX.MTK.AUDIO.DECODER.ADPCM.MS: audio/x-adpcm-ms
OMX.MTK.AUDIO.DECODER.ADPCM.DVI: audio/x-adpcm-dvi-ima
OMX.MTK.AUDIO.DECODER.APE: audio/ape
OMX.MTK.AUDIO.DECODER.ALAC: audio/alac
OMX.MTK.VIDEO.DECODER.HEVC: video/hevc
OMX.MTK.VIDEO.DECODER.MPEG4: video/mp4v-es
OMX.MTK.VIDEO.DECODER.H263: video/3gpp
OMX.MTK.VIDEO.DECODER.AVC: video/avc
OMX.MTK.VIDEO.DECODER.VPX: video/x-vnd.on2.vp8
OMX.MTK.VIDEO.DECODER.VP9: video/x-vnd.on2.vp9
OMX.MTK.VIDEO.DECODER.DIVX: video/divx
OMX.MTK.VIDEO.DECODER.DIVX3: video/divx3
OMX.MTK.VIDEO.DECODER.XVID: video/xvid
OMX.MTK.VIDEO.DECODER.VC1: video/x-ms-wmv
OMX.MTK.VIDEO.DECODER.MPEG2: video/mpeg2
OMX.MTK.VIDEO.ENCODER.MPEG4: video/mp4v-es
OMX.MTK.VIDEO.ENCODER.H263: video/3gpp
OMX.MTK.VIDEO.ENCODER.AVC: video/avc
OMX.MTK.VIDEO.ENCODER.HEVC: video/hevc
OMX.MTK.VIDEO.ENCODER.VPX: video/x-vnd.on2.vp8
OMX.google.mp3.decoder: audio/mpeg
OMX.google.amrnb.decoder: audio/3gpp
OMX.google.amrwb.decoder: audio/amr-wb
OMX.google.aac.decoder: audio/mp4a-latm
OMX.google.g711.alaw.decoder: audio/g711-alaw
OMX.google.g711.mlaw.decoder: audio/g711-mlaw
OMX.google.vorbis.decoder: audio/vorbis
OMX.google.opus.decoder: audio/opus
OMX.google.raw.decoder: audio/raw
OMX.google.aac.encoder: audio/mp4a-latm
OMX.google.amrnb.encoder: audio/3gpp
OMX.google.amrwb.encoder: audio/amr-wb
OMX.google.flac.encoder: audio/flac
OMX.google.mpeg4.decoder: video/mp4v-es
OMX.google.h263.decoder: video/3gpp
OMX.google.h264.decoder: video/avc
OMX.google.hevc.decoder: video/hevc
OMX.google.vp8.decoder: video/x-vnd.on2.vp8
OMX.google.vp9.decoder: video/x-vnd.on2.vp9
OMX.google.h263.encoder: video/3gpp
OMX.google.h264.encoder: video/avc
OMX.google.mpeg4.encoder: video/mp4v-es
OMX.google.vp8.encoder: video/x-vnd.on2.vp8
<<< Directories >>>
Data: /data
Root: /system
Java Home: /system
Download/Cache Content: /data/cache
<< External Storage >>
Primary External Storage: /storage/emulated/0
External Files #1: /storage/emulated/0/Android/data/com.finalwire.aida64/files
External Files #2: /storage/C2E0-1DEA/Android/data/com.finalwire.aida64/files
Alarms: /storage/emulated/0/Alarms
DCIM: /storage/emulated/0/DCIM
Downloads: /storage/emulated/0/Download
Movies: /storage/emulated/0/Movies
Music: /storage/emulated/0/Music
Notifications: /storage/emulated/0/Notifications
Pictures: /storage/emulated/0/Pictures
Podcasts: /storage/emulated/0/Podcasts
Ringtones: /storage/emulated/0/Ringtones
<< Mount Points >>
/: Device: rootfs
File System: rootfs
Read-Only
/dev: Device: tmpfs
File System: tmpfs
Read-Write
/dev/pts: Device: devpts
File System: devpts
Read-Write
/dev/cpuctl: Device: none
File System: cgroup
Read-Write
/dev/cpuset: Device: none
File System: cgroup
Read-Write
/dev/usb-ffs/adb: Device: adb
File System: functionfs
Read-Write
/proc: Device: proc
File System: proc
Read-Write
/sys: Device: sysfs
File System: sysfs
Read-Write
/sys/fs/selinux: Device: selinuxfs
File System: selinuxfs
Read-Write
/sys/kernel/debug: Device: debugfs
File System: debugfs
Read-Write
/sys/kernel/debug/tracing: Device: tracefs
File System: tracefs
Read-Write
/sys/fs/pstore: Device: pstore
File System: pstore
Read-Write
/system: Device: /dev/block/dm-0
File System: ext4
Read-Only
/vendor: Device: /dev/block/dm-1
File System: ext4
Read-Only
/acct: Device: none
File System: cgroup
Read-Write
/mnt: Device: tmpfs
File System: tmpfs
Read-Write
/mnt/runtime/default/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/read/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/write/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/media_rw/C2E0-1DEA: Device: /dev/block/vold/public:179,129
File System: vfat
Read-Write
/mnt/runtime/default/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/mnt/runtime/read/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/mnt/runtime/write/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/config: Device: none
File System: configfs
Read-Write
/cache: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
File System: ext4
Read-Write
/protect_f: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
File System: ext4
Read-Write
/protect_s: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
File System: ext4
Read-Write
/nvdata: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
File System: ext4
Read-Write
/nvcfg: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvcfg
File System: ext4
Read-Write
/data: Device: /dev/block/dm-2
File System: ext4
Read-Write
/storage: Device: tmpfs
File System: tmpfs
Read-Write
/storage/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/storage/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/storage/self: Device: tmpfs
File System: tmpfs
Read-Write
<<< System Files >>>
Buddy Info: /proc/buddyinfo
Build Properties: /system/build.prop
Character & Block Devices: /proc/devices
Command Line: /proc/cmdline
CPU Information: /proc/cpuinfo
Default Properties: /default.prop
Execution Domains: /proc/execdomains
File Systems: /proc/filesystems
Frame Buffer Devices: /proc/fb
Hosts: /system/etc/hosts
Interrupts: /proc/interrupts
Input Devices: /proc/bus/input/devices
I/O Ports: /proc/ioports
Kernel Version: /proc/version
Load Average: /proc/loadavg
Locked Files: /proc/locks
Memory Information: /proc/meminfo
Memory Map: /proc/iomem
Misc Drivers: /proc/misc
Partitions: /proc/partitions
Statistics: /proc/stat
Swap Spaces: /proc/swaps
serial number:SN811SN8112H184641652

Related

Serial cable instead USB ? UART...

As I'm new to Samsung handsets...
Someone tried to play with serial cable and Qualcomm Tools like Memory Debug for instance?
Download Mode not allow USB Diag for Qualcomm... only Samsung Modem is still alive in Download Mode. So Question is. If serial cable, maybe chance to dump something as you can port to UART...
Best Regards
delete.......
I use usb->serial-ttl 3.3V converter with 528K resistor on pins 4-5 for outputing diag message. And you need JIG with 301K resistor for entering to download mode.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=12689198&postcount=181
Thanx for this info, but tooo difficult for me to understand.
Please help to make such cable for research... or maybe their are existing cables to buy?
I need something like this:
http://www.badanation.de/topic.php?t=1616&page=fst_unread&highlight=widerstand
Such Pictures would be nice:
http://h-3.abload.de/img/p1000660eei7.jpg
I need FULL Pinout please for S8500.
Thanx in advance.
Best Regards
You mean cable/plug for enter download mode? You can buy it. For example in Poland I can buy this for 12 zlotys = 3 euro + delivery costs.
I found that, for Galaxy S, but is possible this is the same
forum.xda-developers.com/showthread.php?t=819551
I "need" alternate cable for communication between PC and S8500.
Also FULL Pinout is welcome.
Best Regards
http://forum.xda-developers.com/showthread.php?t=820275
Here seems few infos... maybe also work for S8500.
Best Regards
After I saw successfully log from srg.mstr.
Thank you very much.
http://forum.xda-developers.com/showpost.php?p=13426392&postcount=183
Less then 1 Euro for male Connector:
http://www.conrad.de/ce/de/product/733923/MICRO-USB-STECKER-TYP-B-5POL/SHOP_AREA_40306
So I will buy few Connectors...
Now I will make checklist for other parts and prices. As I have no cables at home to cut...
Best Regards
TX<-->2
RX<-->3
GND<-->5
resistor between 4<-->5
http://forum.xda-developers.com/showpost.php?p=13293404&postcount=174
Will try to make such cable this year... in 2013 really.
Checklist...
http://www.conrad.de/ce/de/product/...Kabelmontage-ohne-Gehaeuse-BKL-Electronic-Inh
.
.
.
Best Regards
Will try to make such cable this year...
Click to expand...
Click to collapse
Uupsi, only 2 months left... but I have found other way for Bootlog...
via JTAG RAM dump... something above 0x40000000...
Looks like this:
http://forum.xda-developers.com/showpost.php?p=47037737&postcount=34
Best Regards
2013 soon over... but Mission UART is not over...
New attempt... for 2014...
It seems now "cheap" USB stuff available... based on PL2303... symbolic Photo attached...
According to this Pic...
http://forum.xda-developers.com/showpost.php?p=13426392&postcount=183
Other idea is to solder direct to RX TX and GND on PCB... instead resistor...
Maybe...
Best Regards
Short tested with 3 wires soldered direct to RX TX and Ground under battery/label...
Hmm... first test failed with WinComm... maybe my settings are wrong, will try other Tool for Logging...
Best Regards
Btw...
Never seen S5250 or S8600 user trying to capture data over UART...
:silly:
Code:
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
[BM : ] FSR_BML_GetFullPartI() is completed
[BM : ] stPartI.nNumOfPartEntry : 7
[BM : ] 1th PartEntrt(nAttr:0x1002)(nID:0x0)
[BM : ] [1th] pPEntry->n1stVun : 1
[BM : ] [1th] pPEntry->nNumOfUnits : 7
[BM : ] [1th] pPEntry->nLoadAddr : 0x0
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42480000
[BOOT_V1.0 (May 28 2010, 21:22:23)]
SelectBootingMode: H/W...0xe.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
S6E63M0 : LDI_Pentile_Set_Change Pentile_Value =6c
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Flash_Unlock failed
Poweron status - c0
FSA9480 0x03 Register = 0
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 0
FSA9480 0x07 Register = 1f
Used WinComm as Tool...
Stupid me not realized that TX connect to RX and RX to TX... :cyclops:
Best Regards
Code:
[PAM: ] ++FSR_PAM_Init
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
bl3_info_block 1 and 2 not found, Load BL3
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42080000
[BOOT_V1.0 (Jan 5 2012, 19:08:14)]
SelectBootingMode: H/W...0xe.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
S6E63M0 : LDI_Pentile_Set_Change Pentile_Value =6c
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Flash_Unlock failed
Poweron status - 0
FSA9480 0x03 Register = 0
FSA9480 0x0A Register = 4
FSA9480 0x0B Register = 0
FSA9480 0x07 Register = 1f
Display_LSI_Boot : disp_Main_Clean
Display_LSI_Boot : disp_Main_Clean_All
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_dimming_backlight
LDI_S6E63M0_Set_Brightness is Return (Level: 1)
Display_LSI_Boot : disp_dimming_backlight
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
+SDHC_Open(Ch0)
univ_SD_MEM_PowerOnDevice() : Power On
univ_SD_MEM_PowerOnDevice(ch0) : MASSMEMORY_EN Power On
[SDHC] MPLL source clock from SYSCON : 667000000Hz
[SDHC] SDHC(ch0) source clock from SYSCON : 47642000Hz
[SDHC] SDHC(ch0) Operating Clock : 372203Hz
[SDHC][MMC]byte mode
SD_MEM_Phy_CMD2(ch0) : CID(127~0) : 0x150100, 0x4d324731, 0x44441655, 0x3c7886d
SD_MEM_Phy_Check_moviNAND_Version(ch0) : PRV - 0x16
MMC_Spec = 4
----------------CSD Version 1.0--------in low level-------------
channel: [0]
One Block Size: [512]Byte
Total card Block Count = [4014080]
Total card Capacity Size = [1960]MB
---------------------------------------------------
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0x400f
SD_MEM_Phy_TransferState(ch0) :High: Tx : SD_FeedBackClock_BasicDelay
SD_MEM_Phy_TransferState(ch0) :High: Rx : SD_FeedBackClock_InverterDelay
[SDHC] MPLL source clock from SYSCON : 667000000Hz
[SDHC] SDHC(ch0) source clock from SYSCON : 47642000Hz
[SDHC] SDHC(ch0) Operating Clock : 47642000Hz
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0xf
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0xf
-SDHC_Open(Ch0)
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_ModemInit!!!!!!!!!!!!!!!!!
DRV_CopyQSCBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
DRV_Modem_BootingStart retry count = 0.
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.86-g5b25f8d ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Tue Nov 5 22:35:53 CET 2013
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: wave
Memory policy: ECC disabled, Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110222)
<7>s5pv210_init_clocks: initializing clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<4>s3c24xx_register_clock: new clock sclk_csis, id -1, dev (null) uses same enable bit as mout_csis, id -1, dev (null)
<4>s3c24xx_register_clock: new clock lcd, id -1, dev (null) uses same enable bit as sclk_fimd, id -1, dev (null)
<4>s3c24xx_register_clock: new clock mfc, id -1, dev (null) uses same enable bit as sclk_mfc, id -1, dev (null)
<4>s3c24xx_register_clock: new clock iis, id 0, dev (null) uses same enable bit as i2s_v50, id 0, dev (null)
<7>s5pv210_setup_clocks: registering clocks
<7>s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00400400
<7>s5pv210_setup_clocks: xtal is 24000000
<6>S5PV210: PLL settings, A=800000000, M=667000000, E=80000000 V=54000000<6>S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
<6>sclk_dmc: source is mout_mpll (1), rate is 166750000
<6>sclk_onenand: source is hclk_dsys (1), rate is 83375000
<6>sclk: source is mout_mpll (6), rate is 133400000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk_mixer: source is sclk_dac (0), rate is 54000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_cam: source is xusbxti (1), rate is 24000000
<6>sclk_cam: source is ext_xtal (0), rate is 24000000
<6>sclk_fimd: source is mout_mpll (6), rate is 133400000
<6>sclk_mmc: source is mout_mpll (6), rate is 51307692
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mfc: source is sclk_a2m (0), rate is 200000000
<6>sclk_fimg2d: source is sclk_a2m (0), rate is 200000000
<6>sclk: source is mout_mpll (1), rate is 66700000
<6>sclk_csis: source is ext_xtal (0), rate is 24000000
<6>sclk_spi: source is mout_epll (7), rate is 80000000
<6>sclk_spi: source is mout_epll (7), rate is 80000000
<6>sclk_pwi: source is ext_xtal (0), rate is 24000000
<6>sclk_pwm: source is ext_xtal (0), rate is 24000000
<6>sclk_mdnie: source is mout_mpll (6), rate is 166750000
<6>sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
<6>s5p: 11534336 bytes system memory reserved for mfc at 0x24500000, 0-bank base(0x24500000)
<6>s5p: 11534336 bytes system memory reserved for mfc at 0x4f3f4000, 1-bank base(0x4f3f4000)
<6>s5p: 11534336 bytes system memory reserved for fimc0 at 0x4e8f4000, 1-bank base(0x4e8f4000)
<6>s5p: 11534336 bytes system memory reserved for fimc2 at 0x4ddf4000, 1-bank base(0x4ddf4000)
<6>s5p: 4194304 bytes system memory reserved for jpeg at 0x24500000, 0-bank base(0x24500000)
<6>s5p: 7680000 bytes system memory reserved for fimd at 0x4d6a1000, 1-bank base(0x4d6a1000)
<7>On node 0 totalpages: 72621
<7> Normal zone: 1534 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 71087 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 71087
<5>Kernel command line: init=/init loglevel=4
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 69MB 214MB 0MB = 283MB total
<5>Memory: 272496k/325052k available, 17988k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0000000 - 0xfc000000 ( 192 MB)
lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0617000 (6204 kB)
.text : 0xc0617000 - 0xc0ce8000 (6980 kB)
.data : 0xc0ce8000 - 0xc0d34880 ( 307 kB)
.bss : 0xc0d348a4 - 0xc0e76ad8 (1289 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:339
<6>VIC @fc000000: id 0x00041192, vendor 0x41
<6>VIC @fc010000: id 0x00041192, vendor 0x41
<6>VIC @fc020000: id 0x00041192, vendor 0x41
<6>VIC @fc030000: id 0x00041192, vendor 0x41
<6>mult[140737]
<6>max_delta_ns[2937815369]
<6>min_delta_ns[30517]
<6>rate[32768]
<6>HZ[256]
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... <c>795.12 BogoMIPS (lpj=1554432)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>ram_console: got buffer at 4ff00400, size fec00
<6>ram_console: uncorrectable error in header
<6>ram_console: no valid data in buffer (sig = 0xfeffdfff)
<6>console [ram-1] enabled
<6>S5PC110 Hardware version : EVT1
<6>HWREV is 0xf
S3C Power Management, Copyright 2004 Simtec Electronics
<6>pmstats at 4ffff000
<3>invalid media device
<3>invalid media device
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>S5PV210: Initializing architecture
<6>s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
<6>s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
<6>s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
<6>s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
<6>print_constraints: pd_audio_supply: 5000 mV normal
<6>print_constraints: pd_cam_supply: 5000 mV normal
<6>print_constraints: pd_tv_supply: 5000 mV normal
<6>print_constraints: pd_lcd_supply: 5000 mV normal
<6>print_constraints: pd_g3d_supply: 5000 mV normal
<6>print_constraints: pd_mfc_supply: 5000 mV normal
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
<6>i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
<3>max8998 6-0066: No interrupt base specified, no interrupts
<3>i2:10, buck2_idx:0
<6>print_constraints: VALIVE_1.2V: 1200 mV
<6>print_constraints: VUSB_1.1V: 1100 mV
<6>print_constraints: VADC_3.3V: 3300 mV
<6>print_constraints: VTF_2.8V: 2800 mV
<6>print_constraints: VLCD_1.8V: 1800 mV
<6>print_constraints: VUSB_3.3V: 3300 mV
<6>print_constraints: VCC_2.8V_PDA: 2800 mV
<6>print_constraints: CAM_AF_2.8V: 2800 mV
<6>print_constraints: CAM_SENSOR_1.2V: 1200 mV
<6>print_constraints: CAM_SENSOR_A2.8V: 2800 mV
<6>print_constraints: CAM_ISP_1.8V: 1800 mV
<6>print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
<6>print_constraints: VGA_DVDD_1.8V: 1800 mV
<6>print_constraints: VCC_3.0V_LCD: 2800 <--> 3200 mV at 3200 mV
<6>print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
<6>print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
<6>print_constraints: VCC_1.8V: 1800 mV
<6>print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
<6>print_constraints: USB_VBUS_AP:
<6>print_constraints: USB_VBUS_CP:
<6>i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
<6>i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)
<6>i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
<6>i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)
<6>i2c-gpio i2c-gpio.12: using pins 199 (SDA) and 200 (SCL)
<6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>Switching to clocksource clock_source_systimer
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switched to NOHz mode on CPU #0
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>PMU: registered new PMU device of type 0
<4>clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
<6>wake enabled for irq 165
<6>wake disabled for irq 165
<6>S5PV210 ADC driver, (c) 2010 Samsung Electronics
<6>Loaded driver for PL330 DMAC-0 s3c-pl330
<6> DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
<6>Loaded driver for PL330 DMAC-1 s3c-pl330
<6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>Loaded driver for PL330 DMAC-2 s3c-pl330
<6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>ashmem: initialized
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<7>yaffs: yaffs built Nov 5 2013 22:34:00 Installing.
<6>msgmni has been set to 532
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler row registered (default)
<6>io scheduler cfq registered
<6>io scheduler sio registered
MDNIE INIT ..........
<6>S3C MDNIE Driver, (c) 2010 Samsung Electronics
MDNIE INIT SUCCESS Addr : 0xf003c000
IELCD INIT ..........
<6>S3C IELCD Driver, (c) 2010 Samsung Electronics
IELCD INIT SUCCESS Addr : 0xf0040000
<6>s3cfb s3cfb: [fb2] dma: 0x4db06000, cpu: 0xf0400000, size: 0x002ee000
<6>FIMD src sclk = 166750000
<6>s3cfb s3cfb: pixclock adjusted from 39019 to 41979
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
[mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
<6>s3cfb_late_resume is called
<6>FIMD src sclk = 166750000
<6>s3cfb s3cfb: pixclock adjusted from 41979 to 41979
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
[mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
<3>panel_reset_lcd
<6>s3cfb_late_resume is complete
<6>s3cfb s3cfb: registered successfully
<6>s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
<6>s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
<6>s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
PA FB = 0x4DB06000, bits per pixel = 32
screen width=480 height=800 va=0xedb06000 pa=0x4db06000
xres_virtual = 480, yres_virtual = 1600, xoffset = 0, yoffset = 0
fb_size=3072000
Back frameBuffer[0].VAddr=edc7d000 PAddr=4dc7d000 size=1536000
No space for NV12 video carveout
<6>brd: module loaded
<6>loop: module loaded
<6>Android kernel panic handler initialized (bind=kpanic)
<6>sec_jack_probe : Registering jack driver
<6>wake enabled for irq 38
<6>sec_jack_init_jack_state<6>sec_jack_set_micbias_state: HWREV=15, on=1
<6>handle_jack_not_inserted
<6>sec_jack_set_micbias_state: HWREV=15, on=0
<6>sec_jack_set_micbias_state: HWREV=15, on=0
<6>wake enabled for irq 167
<6>fsa9480 7-0025: dev1: 0x4, dev2: 0x0
<4>i2c-core: driver [fsa9480] using legacy suspend method
<4>i2c-core: driver [fsa9480] using legacy resume method
<6>modem_io_init done
<6>[MODEM] bp_irq() - PHONE_ACTIVE interrupt, 1 occurence
<6>wake enabled for irq 47
<6>wake enabled for irq 43
<6>modemctl probed
<6>Muxed OneNAND 512MB 1.8V 16-bit (0x50)
<6>OneNAND version = 0x013e
<7>Chip support all block unlock
<7>Chip has 4KiB pagesize
<7>Chip has cache program feature
<6>Scanning device for bad blocks
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x1dd addr8 0x0
<6>OneNAND eraseblock 477 is an initial bad block
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x6cf addr8 0x0
<6>OneNAND eraseblock 1743 is an initial bad block
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x73f addr8 0x0
<6>OneNAND eraseblock 1855 is an initial bad block
<6>OneNAND eraseblock 2047 is an initial bad block
<5>Creating 2 MTD partitions on "(null)":
<5>0x00001e700000-0x00001ec00000 : "nv_data"
<5>0x000003300000-0x000003600000 : "fota"
<6>tl2796: c0, b-6bea38dc, got v 2051000, factory wants 2051000
<6>tl2796: c1, b-7f519b2b, got v 2044000, factory wants 2044000
<6>tl2796: c2, b-ae797fc2, got v 1491000, factory wants 1491000
<6>tl2796_probe successfully probed
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=2
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<7>Registered gadget driver 'android_usb'
<6>input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
<6>input: s5pv210-keypad as /devices/platform/s5pv210-keypad/input/input1
<6>usbcore: registered new interface driver xpad
<6>usbcore: registered new interface driver usb_acecad
<6>acecad: v3.2:USB Acecad Flair tablet driver
<6>usbcore: registered new interface driver aiptek
<6>aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006<6>usbcore: registered new interface driver hanwang
<6>usbcore: registered new interface driver kbtab
<6>kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>usbcore: registered new interface driver wacom
<6>wacom: v1.52:USB Wacom tablet driver
<6>input: mxt224_ts_input as /devices/virtual/input/input2
<6>Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171
<6>bma023 5-0038: bma023 found
<6>bma023 5-0038: al_version=2, ml_version=1
<6>input: accelerometer_sensor as /devices/virtual/input/input3
<3>gp2a: proximity val = 1
<6>input: proximity as /devices/virtual/input/input4
<6>input: orientation_sensor as /devices/virtual/input/input5
<6>max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>using rtc device, s3c, for alarms<6>s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
<6>i2c /dev entries driver
<6>lirc_dev: IR Remote Control driver registered, major 251
<6>IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
<6>IR LIRC bridge handler initialized
<6>Linux video capture interface: v2.00
<6>mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
<6>S3C JPEG Driver, (c) 2007 Samsung Electronics
<6>JPEG driver for S5PV210
<4>i2c-core: driver [s5p_ddc] using legacy suspend method
<4>i2c-core: driver [s5p_ddc] using legacy resume method
<4>i2c-core: driver [Si4709] using legacy suspend method
<4>i2c-core: driver [Si4709] using legacy resume method
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
<6>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
<6>s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
<6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
<6>s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
<6>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<6>zram: num_devices not specified. Using default: 1
<6>zram: Creating 1 devices ...
<6>WM8994 Audio Codec 0.1
wm8994_extensions: initializing driver v10
<6>s3c_idma_preallocate_buffer: VA-f00c0000 PA-C0000000 163840bytes
<6>asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
<6>ALSA device list:
<6> #0: smdkc110
<6>oprofile: using arm/armv7
<6>GACT probability NOT on
<6>Mirror/redirect action on
<6>u32 classifier
<6> Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (4257 buckets, 17028 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>xt_time: kernel timezone is -0000
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>TCP cubic registered
<6>NET: Registered protocol family 10
<6>mmc0: new high speed MMC card at address 0001
<6>Mobile IPv6
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>mmcblk0: mmc0:0001 M2G1DD 1.91 GiB
<6>IPv6 over IPv4 tunneling driver
<6> mmcblk0: p1 p2 p3
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>NET: Registered protocol family 35
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
<6>ThumbEE CPU extension supported.
<6>s5pv210_cpufreq_init: S5PV210 cpu-freq driver
<6>regulator_init_complete: pd_mfc_supply: disabling
<6>regulator_init_complete: pd_tv_supply: disabling
<6>regulator_init_complete: pd_cam_supply: disabling
## wifi_probe
wifi_set_power = 1
wifi_set_carddetect = 1
<4>mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<6>mmc1: new SDIO card at address 0001
F1 signature read @0x18000000=0x9934329
DHD: dongle ram size is set to 294912(orig 294912)
wl_create_event_handler thr:3d started
dhd_attach thr:3e started
dhd_attach thr:3f started
dhd_attach thr:40 started
Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
Dongle Host Driver, version 5.90.195.104
Compiled in drivers/net/wireless/bcmdhd on Nov 5 2013 at 22:34:41
wifi_set_power = 0
=========== WLAN placed in RESET ========
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: setting system clock to 2010-12-31 23:07:37 UTC (1293836857)
<6>FIMC0 registered successfully
<6>FIMC1 registered successfully
<6>FIMC2 registered successfully
<6>S5P TVOUT Driver, (c) 2010 Samsung Electronics
<4>clk_get: could not find clock mout_vpll_src for dev s5p_device_tvout+0x8/0xd8 (s5p-tvout)
<3>failed to find clock "mout_vpll_src"
<6>s5p-tvout s5p-tvout: hpd status: cable removed/not connected
<6>s5p_tv_probe TV Probing is done
<6>max8998_charger_probe : MAX8998 Charger Driver Loading
<6>max8998_charger_probe : pmic interrupt registered
<6>check_lpm_charging_mode : lpm_charging_mode(0)
<6>wake enabled for irq 39
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 0
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<6>max8998_set_cable : status(1)
<7>max8998_charging_control : USB charging enabled
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 21606
discharging reason : 0
<4>Warning: unable to open an initial console.
<7>init_post begin
<6>Freeing init memory: 6204K
<7>max8998_charging_control : USB charging enabled
OHAI, stage1 init starting
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 56 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<3>bio too big device loop0 (2 > 0)
<3>EXT4-fs (loop0): unable to read superblock
<6>EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 80 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
stage1 log:
Fri Dec 31 23:07:37 GMT 2010
Creating filesystem with parameters:
Size: 18874368
Block size: 4096
Blocks per group: 32768
Inodes per group: 1152
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 4608
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/1152 inodes and 1110/4608 blocks
Creating filesystem with parameters:
Size: 419430400
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1600
Label:
Blocks: 102400
Block groups: 4
Reserved block group size: 31
Created filesystem with 11/25600 inodes and 3310/102400 blocks
force_recovery: 1
losetup: /dev/loop0: No such file or directory
mount: mounting /dev/loop0 on /system failed: Invalid argument
umount: can't umount /system: Invalid argument
losetup: /dev/loop2: No such device or address
losetup: /dev/loop0: No such device or address
5708 blocks
Fri Dec 31 23:09:02 GMT 2010
<3>init: cannot open '/initlogo.rle'
.
.
.
Taken from XXLA1 with zImage only... cm-10.1-wave-v2.1...
Interesting to see this...
Code:
<6>Memory: 69MB 214MB 0MB = 283MB total
<5>Memory: 272496k/325052k available, 17988k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0000000 - 0xfc000000 ( 192 MB)
lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0617000 (6204 kB)
.text : 0xc0617000 - 0xc0ce8000 (6980 kB)
.data : 0xc0ce8000 - 0xc0d34880 ( 307 kB)
.bss : 0xc0d348a4 - 0xc0e76ad8 (1289 kB)
Best Regards
This is my solution for now... with S8500. Tested by me.
In theory should work with S8530 too...
Later I will move to cable solution with Micro USB + Resistor...
Then hopefully this is working also with S8600 and S5250 for instance...
Best Regards
http://forum.xda-developers.com/showpost.php?p=41670635&postcount=5
In this FPM Mode... I can use AT Commands via UART...
So for now I can read and write something via UART...
Later more...
Best Regards
Made today few stupid mistakes....
510 R instead K...
Then confuse Pin 4 and 5 ...
I have 510 KOHM, but nothing happens...
Maybe not correct enough...
http://forum.xda-developers.com/showthread.php?t=820275
Code:
RID_FM_BOOT_ON_UART, /* 1 1 1 0 1 [B]619K[/B] Factory Mode Boot ON-UART */
I have used 620 KOHM with S8500 and S8600...
Factory Test Mode start ... this thingie with blue then green Screen... but nothing UART out nor input...
Maybe my wires wrong...
Will buy more Resistors...
Best Regards
Edit 1.
No idea yet, where is my mistake...
http://www.droidforums.net/forum/dr...own-motorola-factory-cable-4.html#post2234017
Backside Pinout...
I have now 510 KOHM + 13 KOHM = 523 KOHM...
Flashed to XXJEB to be sure...
Edit 2.
Check up...
My USB converter is alive...
Pin 4 and 5 should be correct, because Resistor Values working...
Will change Pin 2 and 3...
My fault...
For S8530 and S8500 now working.
Code:
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
bl3_info_block 1 age = 17
bl3_info_block 2 age = 18
BL3_2 Loading
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42080000
[BOOT_V1.0 (Jan 5 2012, 19:05:00)]
SelectBootingMode: H/W...0x3.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
Flash_Unlock failed
Poweron status - 20
FSA9480 0x03 Register = 1
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 8
FSA9480 0x07 Register = 1c
SelectBootingMode: Boot Mode = 1...
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Display_LSI_Boot : disp_Main_Clean
Display_LSI_Boot : disp_Main_Clean_All
Display_LSI_Boot : disp_dimming_backlight
Display_LSI_Boot : disp_Normal_Init
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_ModemInit!!!!!!!!!!!!!!!!!
DRV_CopyQSCBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
DRV_Modem_BootingStart retry count = 0.
AST_POWERON
get_usb_sw_nv 0x40000
USBSwitch : AP
get_uart_sw_nv 0x40000
UARTSwitch : AP
My S8530 first UART output... with cable.
On XXKK5 with S8600 no luck... will try older Firmware...
Best Regards
Edit 1.
S8000 Jet
Code:
USBSwitch : AP
[BB31] VDD INT 1.2V
[BB31] VDD ARM 1.325V
ARM Clock: 400MHz --> 800MHz
[BOOT][DBG] RST_STAT 0x7E00_F904 : 0x00000001
[BOOT] ARMCLK: 800000, MPLL: 194000, HCLKX2: 266666, HCLK: 133333, PCLK: 33333
BootHWCheck: 6...
SelectBootingMode: H/W...0x6.
Poweron status - 10
pPowerOn 0 = 0xB00717E3
pPowerOn 1 = 0x0
pPowerOn 2 = 0x0
pPowerOn 3 = 0x10
pPowerOn 4 = 0x0
pPowerOn 5 = 0x0
pPowerOn 6 = 0x0
pPowerOn 7 = 0x0
pPowerOn 8 = 0x0
pPowerOn 9 = 0x0
pPowerOn 10 = 0x0
pPowerOn 11 = 0x0
pPowerOn 12 = 0x6
pPowerOn 13 = 0x0
FSA9480 0x03 Register = 1
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 8
FSA9480 0x07 Register = 1C
SelectBootingMode: Boot Mode = 1...
================================
LCD Source CLK -> MPLL(194000)
================================
uClkVal = 0x7 , uClkDir = 0x1
========================================
uVidconReg = 0x1D4 , uClkVal = 0x7
========================================
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_MSMInit!!!!!!!!!!!!!!!!!
DRV_CopyMSMBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
Ownership Release 0x5DFFF800, 0x0
AST_POWERON
get_usb_sw_nv 0x0
USBSwitch : AP
get_uart_sw_nv 0x0
UARTSwitch : AP
Drv_TaskEntry Start
DRV_Device_Init...
DRV_Device_Init...: DRV_hwversion = 6.
FSA9480 device ID = 40
JIT UART OFF NU_PWM_FID_SET_GPIO_PWMTOUT ok
prox_sensor_init SUCCESS~~~~~~~~~~~
[BOOT][Err] LCD_DET set PULLDOWN .
[LCD] ESD interrupt enable
acc_sensor_init SUCCESS~~~~~~~~~~~
pif_TaskEntry Start
[MODEMIF_AP_Init] NU_Create_Task pif task success
Create TESTMODE_Queue
Create testmode_task
Create TMFIFO_Queue
Create TESTMODE_RPT_Timer
brcm_bluetooth_main: Start Bluetooth Thread by BootEntry
0002 000.082 0.001.00.00:0000 SYSTEM > MochaTask: OSAL created.
0003 000.084 0.001.00.00:0000 BOOTMGR > MochaTask: OSAL created.
0004 000.091 0.001.00.00:0000 BOOTMGR > MochaTask: UART, USB, and Bluetooth created.
usb_api_open
usb_api_open
0005 000.100 0.001.00.00:0000 SYSTEM > MochaTask: DiagMgr created.
0006 000.106 0.001.00.00:0000 BOOTMGR > MochaTask: DiagMgr created.
0007 000.112 0.001.00.00:0000 EXCEPTION > __MemAllocForDebugHeap: Allocate 1200Kbytes (file OEM\OemDevFIFO.c, line 106)
0008 000.122 0.001.00.00:0000 AGENT > [__SysSecureBootRegisterPktRcvCallback:SysSecureBootPacket.c] __SysSecureBootRegisterPktRcvCallback is called!
0009 000.136 0.001.-1.-1:0000 BOOTMGR > MochaTask: EventMgr created.
0010 000.144 0.001.-1.-1:0000 BOOTMGR > MochaTask: AvMedia created.
0011 000.148 0.001.-1.-1:0000 ALL > DevGetHomeDLFlag : Address(0x0f940000) flag(0x0000ffff)
0012 000.157 0.001.-1.-1:0000 BOOTMGR > MochaTask: Clock created.
0013 000.162 0.001.-1.-1:0000 BOOTMGR > MochaTask: LED created.
0014 000.168 0.001.-1.-1:0000 BOOTMGR > MochaTask: Flip created.
0015 000.174 0.001.-1.-1:0000 SYSTEM > MochaTask: Clock, LED, Flip created.
+SDHC_Open(Ch1)
[SDHC] SDHC(ch1) Operating Clock : 378906Hz
[DS] data_srvc_task() Enter
[DS] diag_srvc_task() Enter
Diag_TaskEntry Start
I9000 tested with success...
So my cable work now with diffferent Samsung handsets...
Accept S8600 ...
Tested also with XXKJ7...
Need few days. Then test with S5250 will follow...
http://forum.xda-developers.com/showthread.php?t=1901376
I9001 is little bit similar to S8600... maybe helpfull.
Also usefull about UART:
http://forum.xda-developers.com/showthread.php?t=1209288
http://forum.xda-developers.com/showthread.php?t=1629359
Best Regards
UART on S5250 work, but not much info... yet...
Code:
AST_POWERON
*MRDY: 1
,~Booting Completed
This is output, if DL Mode...
Code:
AST_DOWNLOAD
I can set UART Logging temporary...
More text...
Best Regards

KB6 ROM (Android 2.2.1) @ Samfirmware for the GT-P1010 (wifi-only Galaxy Tab)

NOTE: the log below pertains to KB5...I haven't had time yet to look into KB6.
http://www.samfirmware.com/WEBPROTECT-p1010.htm
ro.build.display.id=FROYO.XWKB5
ro.build.version.sdk=8
ro.build.version.release=2.2.1
ro.build.date=Thu Feb 17 19:34:43 KST 2011
I'm going to unpack the various RFS archives, to see what's new. I've got a GT-P1000 Galaxy Tab (wifi+3G), so I'm not going to flash with Heimdall (let alone Odin ).
I made backups for factoryfs.rfs / dbdata.rfs etc. using the usual bit-by-bit "dd" -based method, and I've got a trusty TitaniumBackup archive ready, just in case
I notice that TV-out seems to be gone, and FM radio appears to be available. Hardware DSP support seems more present too. (read content logs below for more information)
TAR contents:
Code:
p1wifi_20110128_r10_00.pit (4 KB) (see PIT-info dumped below)
GT-P1010-CSC-SERKB3/
cache.rfs (10.9 MB) (see content listing below)
movinand.mst (51MB) (can be extracted with [URL="http://movitool.ntd.homelinux.org/trac/movitool/"]MoviTool[/URL], based on [URL="http://forum.xda-developers.com/showpost.php?p=9481702&postcount=30"]Volker1's method[/URL])
P1010XWKB5-REV03-ALL-low-CL913814/
boot.bin (256 KB)
cache.rfs (672 KB)
normalboot.img (4.3 MB)
param.lfs (612 KB)
recovery.img (4.3 MB)
Sbl.bin (1.2 MB)
system.rfs (331 MB)
userdata.rfs (1.2 MB)
Output from Volker1's PIT-info utility:
Code:
Contents of PIT file: p1wifi_20110128_r10_00.pit
---------------------------------------------------------------------------
file magic = 0x12349876 (expected value)
Unknown data: 0 0 0 0 0
Number of partitions = 13 (usual value)
Partition #1
Usual content: boot.bin, the primary boot loader (low-level hardware initialization)
partition entry type: 0 0 (normal partition)
ID = 0; flags = 0; unknown: 0
size = 1 blocks of 256 * 512 bytes = 131072 B = 128 kB = 0 MB
unknown string: [........]
partition name = [IBL+PBL.........................]
file name = [boot.bin........................................................]
Partition #2
Usual content: partition information table (PIT)
partition entry type: 0 0 (normal partition)
ID = 0x1; flags = 0; unknown: 0
size = 1 blocks of 256 * 512 bytes = 131072 B = 128 kB = 0 MB
unknown string: [........]
partition name = [PIT.............................]
file name = [p1wifi.pit......................................................]
Partition #3
Usual content: efs.rfs
partition entry type: 0 0 (normal partition)
ID = 0x14; flags = 0x2 (rfs file system); unknown: 0
size = 40 blocks of 256 * 512 bytes = 5242880 B = 5120 kB = 5 MB
unknown string: [........]
partition name = [EFS.............................]
file name = [efs.rfs.........................................................]
Partition #4
Usual content: Sbl.bin, the secondary boot loader (loads linux kernel)
partition entry type: 0 0 (normal partition)
ID = 0x3; flags = 0; unknown: 0
size = 5 blocks of 256 * 512 bytes = 655360 B = 640 kB = 0 MB
unknown string: [........]
partition name = [SBL.............................]
file name = [sbl.bin.........................................................]
Partition #5
Usual content: backup of secondary boot loader
partition entry type: 0 0 (normal partition)
ID = 0x4; flags = 0; unknown: 0
size = 5 blocks of 256 * 512 bytes = 655360 B = 640 kB = 0 MB
unknown string: [........]
partition name = [SBL2............................]
file name = [sbl.bin.........................................................]
Partition #6
Usual content: param.lfs /mnt/.lfs j4fs
partition entry type: 0 0 (normal partition)
ID = 0x15; flags = 0x2 (rfs file system); unknown: 0
size = 20 blocks of 256 * 512 bytes = 2621440 B = 2560 kB = 2 MB
unknown string: [........]
partition name = [PARAM...........................]
file name = [param.lfs.......................................................]
Partition #7
Usual content: zImage, the linux kernel
partition entry type: 0 0 (normal partition)
ID = 0x5; flags = 0; unknown: 0
size = 30 blocks of 256 * 512 bytes = 3932160 B = 3840 kB = 3 MB
unknown string: [........]
partition name = [NORMALBOOT......................]
file name = [normalboot.img..................................................]
Partition #8
Usual content: recovery.bin, the backup copy of zImage/initramfs
partition entry type: 0 0 (normal partition)
ID = 0x8; flags = 0; unknown: 0
size = 30 blocks of 256 * 512 bytes = 3932160 B = 3840 kB = 3 MB
unknown string: [........]
partition name = [RECOVERY........................]
file name = [recovery.img....................................................]
Partition #9
Usual content: factoryfs.rfs
partition entry type: 0 0 (normal partition)
ID = 0x16; flags = 0x2 (rfs file system); unknown: 0
size = 1430 blocks of 256 * 512 bytes = 187432960 B = 183040 kB = 178 MB
unknown string: [........]
partition name = [SYSTEM..........................]
file name = [system.rfs......................................................]
Partition #10
Usual content: dbdata.rfs
partition entry type: 0 0 (normal partition)
ID = 0x17; flags = 0x2 (rfs file system); unknown: 0
size = 302 blocks of 256 * 512 bytes = 39583744 B = 38656 kB = 37 MB
unknown string: [........]
partition name = [USERDATA........................]
file name = [userdata.rfs....................................................]
Partition #11
Usual content: cache.rfs
partition entry type: 0 0 (normal partition)
ID = 0x18; flags = 0x2 (rfs file system); unknown: 0
size = 140 blocks of 256 * 512 bytes = 18350080 B = 17920 kB = 17 MB
unknown string: [........]
partition name = [CACHE...........................]
file name = [cache.rfs.......................................................]
Partition #12
Usual content: modem.bin
partition entry type: 0 2 (unknown value)
ID = 0x3; flags = 0x1; unknown: 0
size = 0 blocks of 0 * 512 bytes = 0 B = 0 kB = 0 MB
unknown string: [........]
partition name = [HIDDEN.D........................]
file name = [hidden.rfs.t....................................................]
Partition #13
Usual content: Unknown
partition entry type: 0 2 (unknown value)
ID = 0; flags = 0x1; unknown: 0
size = 0 blocks of 0 * 512 bytes = 0 B = 0 kB = 0 MB
unknown string: [........]
partition name = [MOVINAND........................]
file name = [movinand.mst....................................................]
The usual CSC cache.rfs content:
Code:
/dbdata/svox/de-DE_gl0_sg.bin
/dbdata/svox/de-DE_ta.bin
/dbdata/svox/en-GB_kh0_sg.bin
/dbdata/svox/en-GB_ta.bin
/dbdata/svox/en-US_lh0_sg.bin
/dbdata/svox/en-US_ta.bin
/dbdata/svox/es-ES_ta.bin
/dbdata/svox/es-ES_zl0_sg.bin
/dbdata/svox/fr-FR_nk0_sg.bin
/dbdata/svox/fr-FR_ta.bin
/dbdata/svox/it-IT_cm0_sg.bin
/dbdata/svox/it-IT_ta.bin
/system/csc/feature.xml
/system/csc/contents.db
/system/csc/others.xml
/system/csc/sales_code.dat
/system/csc/customer.xml
/system/app/MusicODC.apk
/system/T9DB/qwerty_fi.kdb
/system/T9DB/phonepad_cs.kdb
/system/T9DB/qwerty_da.kdb
/system/T9DB/Samsung_400_PLlsUN_xt9.ldb
/system/T9DB/phonepad_lt.kdb
/system/T9DB/Samsung_400_TRlsUN_xt9.ldb
/system/T9DB/Samsung_400_DEusUN_xt9.ldb
/system/T9DB/Samsung_400_ETlsUN_xt9.ldb
/system/T9DB/Samsung_400_ENubUN_xt9.ldb
/system/T9DB/Samsung_400_SVusUN_xt9.ldb
/system/T9DB/qwerty_sv.kdb
/system/T9DB/Samsung_400_DAlsUN.ldb
/system/T9DB/phonepad_uk.kdb
/system/T9DB/phonepad_it.kdb
/system/T9DB/phonepad_el.kdb
/system/T9DB/qwerty_hu.kdb
/system/T9DB/qwerty_es.kdb
/system/T9DB/Samsung_400_UKlsUN_xt9.ldb
/system/T9DB/qwerty_fr.kdb
/system/T9DB/qwerty_et.kdb
/system/T9DB/Samsung_400_SKlsUN_xt9.ldb
/system/T9DB/phonepad_no.kdb
/system/T9DB/qwerty_nl.kdb
/system/T9DB/qwerty_lt.kdb
/system/T9DB/Samsung_400_LVlsUN_xt9.ldb
/system/T9DB/Samsung_400_ITlsUN_xt9.ldb
/system/T9DB/Samsung_400_PTlsUN_xt9.ldb
/system/T9DB/phonepad_da.kdb
/system/T9DB/Samsung_400_HUlsUN_xt9.ldb
/system/T9DB/Samsung_400_ELlsUN_xt9.ldb
/system/T9DB/phonepad_et.kdb
/system/T9DB/Samsung_400_KKlsUN_xt9.ldb
/system/T9DB/phonepad_es.kdb
/system/T9DB/qwerty_sk.kdb
/system/T9DB/phonepad_nl.kdb
/system/T9DB/qwerty_pt.kdb
/system/T9DB/Samsung_400_ESlsUN_xt9.ldb
/system/T9DB/Samsung_400_CSlsUN_xt9.ldb
/system/T9DB/phonepad_ru.kdb
/system/T9DB/phonepad_tr.kdb
/system/T9DB/qwerty_tr.kdb
/system/T9DB/phonepad_de.kdb
/system/T9DB/Samsung_400_FIlsUN_xt9.ldb
/system/T9DB/phonepad_ko.kdb
/system/T9DB/phonepad_fr.kdb
/system/T9DB/phonepad_fi.kdb
/system/T9DB/qwerty_ru.kdb
/system/T9DB/phonepad_en.kdb
/system/T9DB/qwerty_en.kdb
/system/T9DB/qwerty_cs.kdb
/system/T9DB/qwerty_el.kdb
/system/T9DB/Samsung_400_NOlsUN.ldb
/system/T9DB/Samsung_400_RUlsUN_xt9.ldb
/system/T9DB/qwerty_kk.kdb
/system/T9DB/qwerty_no.kdb
/system/T9DB/qwerty_uk.kdb
/system/T9DB/phonepad_lv.kdb
/system/T9DB/phonepad_pl.kdb
/system/T9DB/Samsung_400_NLlsUN_xt9.ldb
/system/T9DB/phonepad_sv.kdb
/system/T9DB/phonepad_sk.kdb
/system/T9DB/Samsung_400_LTlsUN_xt9.ldb
/system/T9DB/qwerty_pl.kdb
/system/T9DB/qwerty_de.kdb
/system/T9DB/Samsung_400_FRlsUN_xt9s.ldb
/system/T9DB/qwerty_ko.kdb
/system/T9DB/qwerty_lv.kdb
/system/T9DB/phonepad_pt.kdb
/system/T9DB/qwerty_it.kdb
/system/T9DB/phonepad_hu.kdb
/system/CSCFiles.txt
/system/SW_Configuration.xml
Changes in /system/app/ :
Removed DailyBriefing, Ebook, Mms, MobileTrackerEngineTwo, MobileTrackerUI, OtaProvisioningService, SamsungWidget_WeatherClock, SoundRecorder, signin, syncmldm, wipereceiver, wssomacp
Added PhoneCrashNotifier, PopupuiReceiverf, qik, qikhelp, skype
Changes in /system/bin/ :
Too many to list, but here are some notable ones:
Removed BCM4329B1_002.002.023.0534.0590.hcd (the driver for the multi-function Broadcom BCM-4329 chipset, also removed in /etc/wifi/ etc.), akmd2 (the multi-sensor driver, now split into several sub-daemons: geomagnetic, gyroscope, temperature, light, orientation, pressure, proximity, etc.)
Notable changes in /system/etc/ :
Added audio/codec/FMRadioEar.ini, audio/codec/FMRadioSpk.ini, and FM-radio stuff in /etc/firmware/ and /lib/libfmradio_jni.so (the Texas Intruments BRF6350 chip supports FM radio...but I don't think that /system/app/ contains an FM tuner application).
Notable addition: /lib/dsp/ + /lib/libOMX*.so + /lib/libVendor_ti_OMX*.so + lib/libaomx_*.so (Texas Intruments OMX/DSP, hardware encoding/decoding of 720p AMR, WB-AMR, AAC, h264, WMA, WMV, MP3, MPEG4, Flac, AC3, S263, etc.)
Code:
720p_h264vdec_sn.dll64P
720p_mp4vdec_sn.dll64P
720p_mp4venc_sn.dll64P
baseimage.dof
baseimage.map
chromasuppress.l64p
conversions.dll64P
dctn_dyn.dll64P
ddspbase_tiomap3430.dof64P
dfgm.dll64P
dynbase_tiomap3430.dof64P
eenf_ti.l64P
h264vdec_sn.dll64P
h264venc_sn.dll64P
ipp_sn.dll64P
jpegdec_sn.dll64P
jpegenc_sn.dll64P
m4venc_sn.dll64P
monitor_tiomap3430.dof64P
mp3dec_sn.dll64P
mp4v720parcdec_sn.dll64P
mp4varcdec_sn.dll64P
mp4vdec_sn.dll64P
mpeg4aacdec_sn.dll64P
mpeg4aacenc_sn.dll64P
mpeg4aridec_sn.dll64P
nbamrdec_sn.dll64P
nbamrenc_sn.dll64P
postprocessor_dualout.dll64P
qosdyn_3430.dll64P
ringio.dll64P
star.l64P
usn.dll64P
vpp_sn.dll64P
wbamrdec_sn.dll64P
wbamrenc_sn.dll64P
wmadec_sn.dll64P
wmv9dec_sn.dll64P
yuvconvert.l64p
Wifi access point doesn't seem very well protected (/etc/wifi/softap/hostapd.conf):
SSID = AndroidAP (not broadcast)
IP = 192.168.43.1
PASS = "password" (WPA)
By the way, the Wifi interface is different than on the fully-featured Tab: tiwlan0 (the access point is tiap0)
Nice let us know what's new and how you make out
This is great news and I am looking forward to your project, thanks!!!
Heads-up: original post updated with PIT partition structure and TAR contents.
Original post updated with further information (FM radio, DSP, etc.). None of this is authoritative, obviously. I am just making plain observations. I haven't even seen the manufacturer's specifications yet for this device.
Splice/combine the ROM with a P1000 ROM?
Cool. Does this mean that your aim to splice/combine the ROM with a P1000 ROM to create a custom Android 2.2.1 ROM WITH 3G capabilities, that is compatible with P1000?
And in that case, it sure would be nice to keep most of what has been removed from /system/* in the P1010 ROM, of course.
Very interesting, thanks for posting the analysis.
I wonder whether GL drivers are any newer than from P1000 ROMs.
And GPS daemon?
Also, interesting about these split sensor drivers.
edit
hmm, interesting, the GL drivers are for SGX530 not 540 like in normal tab.
And the CPU in 1010 is OMAP3 not Hummingbird.
KB6 now online @ Samfirmware.
I'm too busy to look into it though.
Hi,
I just got the Wifi version. How can I check the ROM version?
does the P1010 still have a gps radio?
jackfrostn said:
does the P1010 still have a gps radio?
Click to expand...
Click to collapse
Yes. Only differences between 3g and wifi model:
- no 3G radio
- less powerful CPU/GPU on wifi model (thus can't play HD/Full HD video)
- and off course, wifi model is cheaper
could someone try getting the skype and qik files working
any update on the ROMs progress?
bthoven said:
Yes. Only differences between 3g and wifi model:
- no 3G radio
- less powerful CPU/GPU on wifi model (thus can't play HD/Full HD video)
- and off course, wifi model is cheaper
Click to expand...
Click to collapse
Actually it CAN play HD video. It can record 720p movies so it would only make sense it'd be able to play them. I watch 720p episodes of Breaking Bad on mine.
Sent from my GT-P1010 using XDA Premium App
himmelhauk said:
Actually it CAN play HD video. It can record 720p movies so it would only make sense it'd be able to play them. I watch 720p episodes of Breaking Bad on mine.
Sent from my GT-P1010 using XDA Premium App
Click to expand...
Click to collapse
Yes, it can play 720p lower bitrate whilst the 3G version can play higher bit rate, and also 1080p.
bthoven said:
Yes, it can play 720p lower bitrate whilst the 3G version can play higher bit rate, and also 1080p.
Click to expand...
Click to collapse
Actually it is worth making a correction here as well, it plays 1080 just fine as well, at least for me.
Out of curiousity, where did you see that the wifi has a different CPU/GPU than the GSM/CDMA versions? I'm not finding that info anywhere.
chrisliphart said:
Out of curiousity, where did you see that the wifi has a different CPU/GPU than the GSM/CDMA versions? I'm not finding that info anywhere.
Click to expand...
Click to collapse
In all the TI OMAP libraries and kernel in the ROM?
skype for p1010 wifi
Skype will work with regular rom.i used it all day today
Yes, it does have gps radio on there. Well mine does anyway (in the uk)

[Q] Stock or Modified ROM for Tablet ZTE T77

Hi friends. I was looking and searching for a ROM that fit in my old ZTE T77 and nothing. There is no one stock rom or modified in anywhere. Could you help me to find? I tried flash it with a Ramos W6hd ROM, that have the exactly especifications that mine, but it turned me a blank screen with line. It is not bricked, actually it is working fine. Thank for your help.
General Specifications
Manufacturer ZTE
Model T77
Android version 4.0.4; ICS_T77_20130312.144258; SDK15
CPU 1 core; AMLOGIC MESON3 8726M SKT SH; Max: 1000,0 MHz; Min: 100,0 MHz
Display 1024 x 600; DPI: 160; Evaluated Size: 7,4"
Touch screen Multitouch 2 points
GPU Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 396 MB
Flash 16 GB Build-in (14.563 GB actual); 4 GB (3.637 GB actual)
Communications
Phone None
WiFi 8192cu; IEEE 802.11 b/g/n; RealtekRTL8188/92; AP Mode
USB Host Yes
Bluetooth no
GPS No
Advanced Features
Front camera Photo: 0.3 MP; Max: 640x480; Focus: fixed; No flash
Back camera Photo: 1.9 MP; Max size: 1600x1200; Focus: fixed; No flash
Sensors KXTF9 3-axis Accelerometer (Kionix, Inc.); range: 0...156,906; resolution: 0,01 (0,006%); power: 0,57mA;
AL3010 AMBIENT LIGHT SENSOR (LiteOn Technology Corp.); range: 0...25000; resolution: 1 (0,004%); power: 1mA;
Vibrator No
Supported languages 40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
Battery Technology: null; Voltage: 3824
SD Version: 1.1 5
KERNEL: Linux version 2.6.34 ([email protected]) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #20 PREEMPT Tue Mar 12 14:49:17 BRT 2013
CODENAME: REL
Mainboard: f03ref_NX
BRAND: ZTE
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: T77
DISPLAY: v01.00.14_T77_ZTE_0a.20130312
FINGERPRINT: ZTE/T77/T77:4.0.4/IMM76I/ICS_T77_20130312.144258:user/release-keys
HARDWARE: amlogic
ID: IMM76I
TAGS: release-keys
Processor : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 1638.40
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 4
Hardware : AMLOGIC MESON3 8726M SKT SH
Revision : 0020
Serial : 000000000000000c

Mifare Desfire ev1

Hi,
I am trying to clone or modify this card that I have. I do not have the keys. Is it possible? What can I do with it?
I am basically trying to clone it so it works with my phone case as it is too thick.. I'm open to melting the card and taking the internals out just to get it to work too, any suggestions?
See below for the dump:
** TagInfo scan (version 4.11.59 [β4011059]) 2016-01-04 11:09:14 **
-- INFO ------------------------------
# IC manufacturer:
NXP Semiconductors
# IC type:
MIFARE DESFire EV1 (MF3ICD41)
# DESFire Applications:
1 unknown application
-- NDEF ------------------------------
# NFC data set storage not present:
Maximum NDEF storage size after format: 4094 bytes
-- EXTRA ------------------------------
# Memory information:
Size: 4 kB
Available: 4.0 kB
# IC detailed information:
Capacitance: 17 pF
# Version information:
Vendor ID: NXP
Hardware info:
* Type/subtype: 0x01/0x01
* Version: 1.0
* Storage size: 4096 bytes
* Protocol: ISO/IEC 14443-2 and -3
Software info:
* Type/subtype: 0x01/0x01
* Version: 1.4
* Storage size: 4096 bytes
* Protocol: ISO/IEC 14443-3 and -4
Batch no: 0xBA4450B120
Production date: week 10, 2013
-- TECH ------------------------------
# Technologies supported:
ISO/IEC 7816-4 compatible
Native DESFire APDU framing
ISO/IEC 14443-4 (Type A) compatible
ISO/IEC 14443-3 (Type A) compatible
ISO/IEC 14443-2 (Type A) compatible
# Android technology information:
Tag description:
* TAG: Tech [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
android.nfc.tech.NdefFormatable
android.nfc.tech.IsoDep
* Maximum transceive length: 261 bytes
* Default maximum transceive time-out: 618 ms
* Extended length APDUs not supported
android.nfc.tech.NfcA
* Maximum transceive length: 253 bytes
* Default maximum transceive time-out: 618 ms
# Detailed protocol information:
ID: 04:43:8B:5A:56:2C:80
ATQA: 0x4403
SAK: 0x20
ATS: 0x06757781028000
* Max. accepted frame size: 64 bytes (FSCI: 5)
* Supported receive rates:
- 106, 212, 424, 848 kbit/s (DR: 1, 2, 4, 8)
* Supported send rates:
- 106, 212, 424, 848 kbit/s (DS: 1, 2, 4, 8)
* Different send and receive rates supported
* SFGT: 604.1 us (SFGI: 1)
* FWT: 77.33 ms (FWI: 8)
* NAD not supported
* CID supported
* Historical bytes: 0x80 |.|
# Memory content:
PICC level (Application ID 0x000000)
* PICC key configuration:
- AES key
- PICC key changeable
- PICC key required for:
~ directory list access: no
~ create/delete applications: yes
- Configuration changeable
- PICC key version: 129
Application ID 0x000001
* Key configuration:
- 14 (3)DES keys
- Master key changeable
- Master key required for:
~ directory list access: no
~ create/delete files: yes
- Configuration changeable
- Key itself required for changing a key
* 1 file present
- File ID 0x00: Standard data, 384 bytes
~ Communication: with MAC
~ Read key: key #1
~ Write key: key #2
~ Read/Write key: key #2
~ Change key: master key
~ (No access)
--------------------------------------
As application 0x000001 is using 3DES keys, it may be possible (I'm curious too) to crack the read/write key because its using 3DES and not something stronger like AES
lawonga said:
Hi,
I am trying to clone or modify this card that I have. I do not have the keys. Is it possible? What can I do with it?
I am basically trying to clone it so it works with my phone case as it is too thick.. I'm open to melting the card and taking the internals out just to get it to work too, any suggestions?
See below for the dump:
** TagInfo scan (version 4.11.59 [β4011059]) 2016-01-04 11:09:14 **
-- INFO ------------------------------
# IC manufacturer:
NXP Semiconductors
# IC type:
MIFARE DESFire EV1 (MF3ICD41)
# DESFire Applications:
1 unknown application
-- NDEF ------------------------------
# NFC data set storage not present:
Maximum NDEF storage size after format: 4094 bytes
-- EXTRA ------------------------------
# Memory information:
Size: 4 kB
Available: 4.0 kB
# IC detailed information:
Capacitance: 17 pF
# Version information:
Vendor ID: NXP
Hardware info:
* Type/subtype: 0x01/0x01
* Version: 1.0
* Storage size: 4096 bytes
* Protocol: ISO/IEC 14443-2 and -3
Software info:
* Type/subtype: 0x01/0x01
* Version: 1.4
* Storage size: 4096 bytes
* Protocol: ISO/IEC 14443-3 and -4
Batch no: 0xBA4450B120
Production date: week 10, 2013
-- TECH ------------------------------
# Technologies supported:
ISO/IEC 7816-4 compatible
Native DESFire APDU framing
ISO/IEC 14443-4 (Type A) compatible
ISO/IEC 14443-3 (Type A) compatible
ISO/IEC 14443-2 (Type A) compatible
# Android technology information:
Tag description:
* TAG: Tech [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
android.nfc.tech.NdefFormatable
android.nfc.tech.IsoDep
* Maximum transceive length: 261 bytes
* Default maximum transceive time-out: 618 ms
* Extended length APDUs not supported
android.nfc.tech.NfcA
* Maximum transceive length: 253 bytes
* Default maximum transceive time-out: 618 ms
# Detailed protocol information:
ID: 04:43:8B:5A:56:2C:80
ATQA: 0x4403
SAK: 0x20
ATS: 0x06757781028000
* Max. accepted frame size: 64 bytes (FSCI: 5)
* Supported receive rates:
- 106, 212, 424, 848 kbit/s (DR: 1, 2, 4, 8)
* Supported send rates:
- 106, 212, 424, 848 kbit/s (DS: 1, 2, 4, 8)
* Different send and receive rates supported
* SFGT: 604.1 us (SFGI: 1)
* FWT: 77.33 ms (FWI: 8)
* NAD not supported
* CID supported
* Historical bytes: 0x80 |.|
# Memory content:
PICC level (Application ID 0x000000)
* PICC key configuration:
- AES key
- PICC key changeable
- PICC key required for:
~ directory list access: no
~ create/delete applications: yes
- Configuration changeable
- PICC key version: 129
Application ID 0x000001
* Key configuration:
- 14 (3)DES keys
- Master key changeable
- Master key required for:
~ directory list access: no
~ create/delete files: yes
- Configuration changeable
- Key itself required for changing a key
* 1 file present
- File ID 0x00: Standard data, 384 bytes
~ Communication: with MAC
~ Read key: key #1
~ Write key: key #2
~ Read/Write key: key #2
~ Change key: master key
~ (No access)
--------------------------------------
Click to expand...
Click to collapse
If you get it, please tell us.
I guess no one manage to do this and my EV3 would be even harder to do so ...so no luck I suppose
My application ID is 0x000000 (PICC)

Is there anything I can do??

Hey so I'm fairly new to the development game and so far I've had success with most of the things I've found interest in. But I am having trouble with what I would like to accomplish most. I would really like to root my Galaxy note 8. It's my daily driver and I'd kill for root access. The issue that I'm running into is the only root method for my Verizon Galaxy note 8 is SamFails root method but it's only good for bootloader versions 1-3. My bootloader version is currently sitting at v5 from what I understand. Here's my phone's specs.
System
OS
Version: Oreo 8.0.0
Security patch: 01 February 2019
Build number: R16NW
Tags: release-keys
Bootloader: N950USQS5CSA1
SDK: 26
Font scale: Normal
Time zone: Central Standard Time
Uptime: 01:37:49
Uptime (w/o Deep Sleep): 01:36:59
Radio: N950USQS5CSA1
Miscellaneous
Virtual machine: ART 2.1.0
Version Java Runtime: Android Runtime 0.9
Heap size: 256 MB
SELinux: Permissive
Root: Unavailable
BusyBox: Unavailable
Version ICU: 9.0
Library ICU: 58.2
ICU CLDR: 30.0.3
Version ZLib: null
Version OpenSSL: OpenSSL 1.0.2 (compatible; BoringSSL)
Google Play Services: 15.0.90 (040400-231259764)
Kernel: 4.4.78-14375742
Fingerprint: samsung/greatqltesq/greatqlte:8.0.0/R16NW/N950USQS5CSA1:user/release-keys
Device
Model: SM-N950U
Codename: greatqlte
Manufacturer: samsung
Fingerprint scanner: Present
Display
Type: N/A
Resolution: 2220 x 1080
Frame rate: 60.000004 Hz
Density: 420 dp
Format: N/A
sRGB: Not supported
HDR: Not supported
HDR
Type: HDR10
Average luminance: 200.0
Maximum luminance: 540.0
Minimum luminance: 0.2
Identifiers
Processor
CPU
Model: Qualcomm MSM8998
Name: Snapdragon 835
Architecture: Kyro 280
DSP: Hexagon 682
Process: 10 nm
Cores: 8
Supported ABI: armeabi-v7a armeabi arm64-v8a
Governor: interactive
Frequency range: 300 MHz - 1900 MHz
Usage: 100 %
Based off that info is there anything that I can do to possibly change the bootloader version to 1-3? Please I've done what research I could do with the knowledge that I've obtained thus far and I'm stuck.
So by research did you look through the various threads here regarding rooting?
Kidd kuddi said:
Hey so I'm fairly new to the development game and so far I've had success with most of the things I've found interest in. But I am having trouble with what I would like to accomplish most. I would really like to root my Galaxy note 8. It's my daily driver and I'd kill for root access. The issue that I'm running into is the only root method for my Verizon Galaxy note 8 is SamFails root method but it's only good for bootloader versions 1-3. My bootloader version is currently sitting at v5 from what I understand. Here's my phone's specs.
System
OS
Version: Oreo 8.0.0
Security patch: 01 February 2019
Build number: R16NW
Tags: release-keys
Bootloader: N950USQS5CSA1
SDK: 26
Font scale: Normal
Time zone: Central Standard Time
Uptime: 01:37:49
Uptime (w/o Deep Sleep): 01:36:59
Radio: N950USQS5CSA1
Miscellaneous
Virtual machine: ART 2.1.0
Version Java Runtime: Android Runtime 0.9
Heap size: 256 MB
SELinux: Permissive
Root: Unavailable
BusyBox: Unavailable
Version ICU: 9.0
Library ICU: 58.2
ICU CLDR: 30.0.3
Version ZLib: null
Version OpenSSL: OpenSSL 1.0.2 (compatible; BoringSSL)
Google Play Services: 15.0.90 (040400-231259764)
Kernel: 4.4.78-14375742
Fingerprint: samsung/greatqltesq/greatqlte:8.0.0/R16NW/N950USQS5CSA1:user/release-keys
Device
Model: SM-N950U
Codename: greatqlte
Manufacturer: samsung
Fingerprint scanner: Present
Display
Type: N/A
Resolution: 2220 x 1080
Frame rate: 60.000004 Hz
Density: 420 dp
Format: N/A
sRGB: Not supported
HDR: Not supported
HDR
Type: HDR10
Average luminance: 200.0
Maximum luminance: 540.0
Minimum luminance: 0.2
Identifiers
Processor
CPU
Model: Qualcomm MSM8998
Name: Snapdragon 835
Architecture: Kyro 280
DSP: Hexagon 682
Process: 10 nm
Cores: 8
Supported ABI: armeabi-v7a armeabi arm64-v8a
Governor: interactive
Frequency range: 300 MHz - 1900 MHz
Usage: 100 %
Based off that info is there anything that I can do to possibly change the bootloader version to 1-3? Please I've done what research I could do with the knowledge that I've obtained thus far and I'm stuck.
Click to expand...
Click to collapse
You're on bootloader version 5 and there's nothing you can do because there's no possibility of downgrading your bootloader version back to 1 - 3 and there's no root available at this point in time.

Categories

Resources