Hello to all, i have a Fire Stick 4K but when i try to connect with my PC via USB the system recognize the periferal with name "AFTMM" but in explorer i see nothing because in properties says "device migration not performed".
I use Win 10 64 bit and i have also load the MTK driver but the result is the same..can someone help me ??
Ykanks a lot Carlo
Related
I have had my Kindle Fire for a week after bought from a friend, it had been installed CM10 ROM http://forum.xda-developers.com/showthread.php?t=1778010.
When i try to play some HD game with my KF, i try to install Chainfire 3D, after i install CF3D Driver (part of Chainfire 3D), my KF reboot then stuck at Kindle Fire welcome screen (white - orange kindle fire logo).
OMG, this my first times I’m using an android device, I try to plug the Kindle into the USB port on my Laptop (Windows 7) by Blackberry phone cable, it will only recognize the device in My Computer as a regular disk drive. An entry for "Removable Disk G:\" drive comes up, but when I click to open it, it says, "Please insert a disk into Removable Disk (G:\)". I copied a video to KF before it stuck.
After read a lot of threads, i know what i need to do is try to make my PC recognize KF device. I’ve tried install driver from KFU folder, Kindle Fire USB Driver and Google USB Driver from SDK Manager, rebooting the KF, unplugging/plugging it in each USB port, power off before plugging, rebooting the PC, etc.
I try to make a factory cable, nothing better (I think it just be useful if the PC can recognize KF device).
At Device Manager I have “Amazon File-CD Gadget USB Device” (when using factory cable, it will have “Unknown device” instead of “Amazon File-CD Gadget USB Device”). List of devices (Device Manager window) don’t have Kindle or Android Phone (when I try to add Android ADB Interface, Android Bootloader Interface, Android Composite ADB Interface by legacy hardware it have a yellow exclamation point)
At Devices and Printers, the properties of the Amazon Kindle Fire's hardware, it just list: Amazon File-CD Gadget USB Device and USB Mass Storage Device (don’t have Kindle, USB Composite Device as some Guide website).
Does anyone have any idea? I don’t think KF device can be bricked easily by install a driver that not compatible with ROM!
have a kindle fire 2 Non HD version
I have rooted several tablets in the past all touch pads.
So i am not exactly a noob but not a expert by any means,
I connected my kindle to my computer running windows 7 64bit
it did the normal installing device drivers but when it was done it came up with a error
windows will not find kindle mtp
under android composite ADB interface it lists kindle fire
and USB Composite Device Universal serial
when I check my kindle directly it says connected as media but can not transfer files
in my device manager it shows up as
unspecified kindle
I cant access any further until i can access the device to root.
Need help with this please!!
I Too am having this problem, anyone with a solution please reply or message!!!
dyson77 said:
have a kindle fire 2 Non HD version
I have rooted several tablets in the past all touch pads.
So i am not exactly a noob but not a expert by any means,
I connected my kindle to my computer running windows 7 64bit
it did the normal installing device drivers but when it was done it came up with a error
windows will not find kindle mtp
under android composite ADB interface it lists kindle fire
and USB Composite Device Universal serial
when I check my kindle directly it says connected as media but can not transfer files
in my device manager it shows up as
unspecified kindle
I cant access any further until i can access the device to root.
Click to expand...
Click to collapse
I am brand new to rooting so please excuse the noob naiveté. I rooted my original version Kindle Fire with the stable version of Cyanogenmod 10.1.3. Everything went well until I tried to connect my Fire to my Windows 7 computer via USB cable. The computer will not connect to the Kindle Fire. When I go to the Device Manager I see the Kindle Fire listed as "Kindle" but I cannot communicate with the device. As per some other suggestions on the web I uninstalled the Kindle driver and tried to let Windows 7 install the correct driver. This has not worked. I tried to uninstall the current driver and use an older driver from Kindle Fire Utility 0.9.6 (I originally used version 0.9.8) but this too failed to be reconized and connect. Can anyone help me get my computer to recognize my Kindle Fire so I could transfer files? Thank you all in advance.
Quote
MultiQuote
Edit
Report
You should get a notification on the kindle when you plug it into the computer, you'll have to tap the notification to bring up a screen with the android guy and a button that says something along the lines of enable file transfer or enable usb our something, been a while don't remember lol, anyway click that and you should have it pop up on the pc for file share
Sent from my SM-T210R using Tapatalk
Hi nooby here.. hope you can help...
Going mad trying to get pc to connect to Fire TV to allow me to side load XBMC ... have downloaded various utilities which do not allow me to connect to Fire TV and even tried just using adb from command line as follows :
adb connect < ip address of fire> which just hangs and I have set adb options on through settings on Fire Tv.
even why I type adb devices in command line I get nothing coming back from list of devices attached ?
Coul it be my firewall(s) ... I am just using windows firewall on pc and trying to connect via sky sagecom router
made sure that Fire Tv is on same network and I can ping fire tv no problems from cmd on PC ?
An y help would be appreciated - thanks
sauzee21 said:
Hi nooby here.. hope you can help...
Going mad trying to get pc to connect to Fire TV to allow me to side load XBMC ... have downloaded various utilities which do not allow me to connect to Fire TV and even tried just using adb from command line as follows :
adb connect < ip address of fire> which just hangs and I have set adb options on through settings on Fire Tv.
even why I type adb devices in command line I get nothing coming back from list of devices attached ?
Coul it be my firewall(s) ... I am just using windows firewall on pc and trying to connect via sky sagecom router
made sure that Fire Tv is on same network and I can ping fire tv no problems from cmd on PC ?
An y help would be appreciated - thanks
Click to expand...
Click to collapse
Did you activate ADB on your AFTV?
Well, this may sound like a dumb question, but it's usually the small things that will give you issues.
So, do you have ADB turned on the Fire TV?
Also, is your AFTV connected wired or wireless?
Have you tried setting a static IP on your AFTV?
And this will not solve your issue, but if you have a Android tablet or phone you can install Terminal Emulator and ADB into the AFTV using it (ADB is apart of Android so you don't have to do anything but install and run Terminal Emulator then run adb commands).
adb connect your.ip.address:5555
I know I can transfer via adb over my network but is there a way to transfer apks and files directly to the fire tv stick? Has anyone been able to access the file system without registering the device. I remember a long time ago on the fire tv's there was a way to do this via adb but can this be done with a hard cable directly from computer?
Go to this site to get drivers for fire stick, install them , and plug your fire stick in with just usb to your computer(wait for windows to say your hardware is ready to use). You can also install apps using adb. Worked for me on Windows 10.
https://developer.amazon.com/docs/fire-tv/connecting-adb-to-device.html
srk707 said:
Go to this site to get drivers for fire stick, install them , and plug your fire stick in with just usb to your computer(wait for windows to say your hardware is ready to use). You can also install apps using adb. Worked for me on Windows 10.
https://developer.amazon.com/docs/fire-tv/connecting-adb-to-device.html
Click to expand...
Click to collapse
Thank you for that link and info. Do you know if I have to log into an account before doing this transfer? Or can I just open the package plug it in and transfer the files?
I was already logged in, so don't know. But you don't have register the stick. Try plugging it in and see if windows will recognize it.