Develop Bugs

[Magisk][Module]HTC 10 SafetyNET fix for any ROM

Hello everyone !
As you know this module help you to fix Safetynet by change build fingerprint to Xiaomi Mi 6s
But when you use the original module, Google will show your device as Xiaomi Mi 6s
I made a little modify to change build fingerprint to our HTC stock ROM, it'll show your device as HTC 10
A build will release when the original build release, same time !
Some report said that you can use this module for HTC stock ROM, I can't help you if you got error about this ROM
Download : Move to Download tab
ROM tested : LineageOS (official), RR (official)
This required :
No Xposed and SuperSU, even systemless
Systemless modifications in your system only
MagiskSU
Magisk Hide working properly
Main thread : https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
Thanks to : @Deic for his source code
XDA:DevDB Information
HTC 10 (pme) SafetyNET fix, Tool/Utility for the HTC 10
Contributors
hiimpig1
Source Code: https://github.com/piiiggg/xiaomi-safetynet-fix/tree/pme
Version Information
Status: Stable
Created 2017-06-25
Last Updated 2017-06-28

Update some screenshot
Tested on : LOS official and RR official ROMs

Can confirm that this work on stock ROM, if any magisk module cause safetynet to fail. Thanks for your work!

azZA_09 said:
Can confirm that this work on stock ROM, if any magisk module cause safetynet to fail. Thanks for your work!
Click to expand...
Click to collapse
Thanks, I'll note it on #1

Installing it made my mobile data not turn on anymore, as well as killing off wifi, and magisk. it also unrooted me. it basically ruined my phone. wow.

tiki2134 said:
Installing it made my mobile data not turn on anymore, as well as killing off wifi, and magisk. it also unrooted me. it basically ruined my phone. wow.
Click to expand...
Click to collapse
I think you have to enable force encrypt when install magisk, try this
Install any kind of root like supersu - download magisk manager - install magisk without disable force encrypt - uninstall supersu - install module
I never use stock rom so idk, I only tested on custom ROM

tiki2134 said:
Installing it made my mobile data not turn on anymore, as well as killing off wifi, and magisk. it also unrooted me. it basically ruined my phone. wow.
Click to expand...
Click to collapse
Same thing happened to mine. Get the uninstall zip from the Deic thread referenced above and it will put your phone back where it was. You'll have to download it to your computer first and then copy it to your SD card via USB or putting your card into your computer. Then get into the recovery by powering down and holding the power and vol-down keys to get into Boot loader or using the power key options in your ROM, if present. I couldn't get into the Recovery with the power key options but could get into the Boot loader. Once in the Boot loader, use the volume-down key to get to the recovery option and execute it by pushing the power key. From recovery install the uninstall that you copied to your SD card (internal or external) and reboot. My phone came back up in the same state as before trying the module.

lichan said:
Same thing happened to mine. Get the uninstall zip from the Deic thread referenced above and it will put your phone back where it was. You'll have to download it to your computer first and then copy it to your SD card via USB or putting your card into your computer. Then get into the recovery by powering down and holding the power and vol-down keys to get into Boot loader or using the power key options in your ROM, if present. I couldn't get into the Recovery with the power key options but could get into the Boot loader. Once in the Boot loader, use the volume-down key to get to the recovery option and execute it by pushing the power key. From recovery install the uninstall that you copied to your SD card (internal or external) and reboot. My phone came back up in the same state as before trying the module.
Click to expand...
Click to collapse
The module change (faking) bootloader unlock status, could be a problem with HTC stock ROM. When you got this problem, after install Magisk or install my module ?

hiimpig1 said:
The module change (faking) bootloader unlock status, could be a problem with HTC stock ROM. When you got this problem, after install Magisk or install my module ?
Click to expand...
Click to collapse
This was on an HTC 10 with Viper 10 ROM with Magisk 12 and Magisk SU installed with Magisk Hide activated. It happened after installing the Safety Net fix. I did not have Magisk encryption enabled and may have had a couple of modules installed. I may try some different things to see if I can get it to work later.

lichan said:
This was on an HTC 10 with Viper 10 ROM with Magisk 12 and Magisk SU installed with Magisk Hide activated. It happened after installing the Safety Net fix. I did not have Magisk encryption enabled and may have had a couple of modules installed. I may try some different things to see if I can get it to work later.
Click to expand...
Click to collapse
Radio not working on stock ROM because encryption not enable, a guy was taking about this before. Or changing stock ROM bootloader status could cause this problem.

It was working fine earlier, but now I updated to 13.2 & safety check stopped working, uninstalled from Tarp uninstaller & reinstalled the 12.0, flashed safety check for HTC 10, but safety check fails please tell me how to fix

aryan_rulz_1983 said:
It was working fine earlier, but now I updated to 13.2 & safety check stopped working, uninstalled from Tarp uninstaller & reinstalled the 12.0, flashed safety check for HTC 10, but safety check fails please tell me how to fix
Click to expand...
Click to collapse
Sorry, I was sold my device. You can learn how to make new version of this module on main thread

aryan_rulz_1983 said:
It was working fine earlier, but now I updated to 13.2 & safety check stopped working, uninstalled from Tarp uninstaller & reinstalled the 12.0, flashed safety check for HTC 10, but safety check fails please tell me how to fix
Click to expand...
Click to collapse
The 13.3 update was released last night, thos should fix.

[GSI][UNOFFICIAL] LineageOS 17.1 Modified [TEST][XT1952-2]

MODIFIED EXCLUSIVELY FOR MOTO G7 PLAY
WARNING
Do not try to install this via fastboot, remove the magisk, to remove just reinstall the Stock Rom
MAIN FEATURES
Root modified by Spaceminer
More speed
Added multiple apps
Several useless apps removed
Black theme automatically enabled in all supported applications
Gapps already installed
Notch fix
And more
DOES NOT WORK
Fingerprint
Automatic brightness
INSTALLATION INSTRUCTION
1. Download and extract
2. Put the GSI on your memory card
3. Restart your phone in Bootloader / Fastboot mode
4. Open fastboot on your computer
use the command: fastboot -w
use the command: fastboot boot twrp.img
5. TWRP: Install> Install image> Choose image file> Flash on the system
DOWNLOADS
TWRP by Spaceminer: https://mega.nz/#!roRzBCTK!THHq0VMWqgtowJNkY-Id3b9S9H9dhzsJhE83k0Kvt2k
GSI: https://www.drive.google.com/file/d/1000HaJJqMdGyOtEd7ribp4n5Eb9l-3my/view

Works great apart from when I make calls the microphone doesn't work...whatsapp calls are fine it only seems to be a problem on cellular!

When I select the image I get 4 options and it does not let me install with any

With this my G7 play stay 32bits or can change for 64 bits?

RafaelItape said:
With this my G7 play stay 32bits or can change for 64 bits?
Click to expand...
Click to collapse
until we get a 64 bit kernel, it'll stay 32. i want to build a 64 kernel cause i want to bring ubuntu touch to this phone, that requires a 64 bit boot image, if we are to use erfan's (only method for android 9 devices rn)

Thanks man.
Managed to get magisk working with this rom..alongside twrp
Simply install latest magisk canary APK (284). Give it super user when it asks and restart the app
Then when clicking install...it gave me option of direct install (make sure recovery is selected). It should install successfully
I then rebooted to bootloader and to get to twrp hold volume up after selecting recovery and dont hold anything to boot back to Los..
Can't share my boot image if that helps anyone

CFKod said:
Thanks man.
Managed to get magisk working with this rom..alongside twrp
Simply install latest magisk canary APK (284). Give it super user when it asks and restart the app
Then when clicking install...it gave me option of direct install (make sure recovery is selected). It should install successfully
I then rebooted to bootloader and to get to twrp hold volume up after selecting recovery and dont hold anything to boot back to Los..
Can't share my boot image if that helps anyone
Click to expand...
Click to collapse
I gave it a try. It did indeed let me patch directly. It was very unstable. Things asking for su multiple times and not remembering my choice, certain modules not installing, and I always seemed to lose root entirely after rebooting

BobbyBlunt said:
I gave it a try. It did indeed let me patch directly. It was very unstable. Things asking for su multiple times and not remembering my choice, certain modules not installing, and I always seemed to lose root entirely after rebooting
Click to expand...
Click to collapse
yup... sorry, forgot to post... I assumed it was after installing modules.

Lockscreen not work for me, in all gsi roms.
Only stock works.

rom works great, feels like a new phone.
model XT1952-4.
not working unfortunately is the FM radio.
based on the error message when trying to install FM apps, it looks like the kernel driver was not included in the rom?
I can deal with the fingerprint not working, it would be really nice to get the FM driver included so I don't have to use data.
Overall the phone is so much better with this rom, Thank You!!!!

Hi, probably a stupid question, considering I'm new: what does this differ from the Lineage OS instructions for Moto G7 Play at their web site? I mean, why shouldn't I stick with their instructions?
I just want to understand what is at stake here (again, I'm new at this world of smartphone os's)
I'm really interested in replacing Android (which I like, but it's... Google ) and all carrier bloatware stuff by a free OS.
EDIT: Nevermind. I've just realized that it isn't for the G7 Play, it's for G7 only. Sorry about this (maybe useful for other newbies like me)

Thanks for all the work
Everything seems stable been using on daily driver for 2 days now. Only issue is bluetooth audio not working. I'm wondering if the Motorola face unlock app would work however current version isn't available.

gadolf said:
Hi, probably a stupid question, considering I'm new: what does this differ from the Lineage OS instructions for Moto G7 Play at their web site? I mean, why shouldn't I stick with their instructions?
I just want to understand what is at stake here (again, I'm new at this world of smartphone os's)
I'm really interested in replacing Android (which I like, but it's... Google ) and all carrier bloatware stuff by a free OS.
EDIT: Nevermind. I've just realized that it isn't for the G7 Play, it's for G7 only. Sorry about this (maybe useful for other newbies like me)
Click to expand...
Click to collapse
I'm using this on a Moto g⁷ Play in the USA, currently it's pretty stable. As for what's at stake, you lose access to Bluetooth audio, fingerprint & faceunlock unless you have SD card formated as portable storage and manage to get magisk working. There's a fix for Bluetooth Audio with magisk or ADB but I don't remember what the command was. Also as for magisk you should be able to fix atleast faceunlock because Motorola uses an app for it.

XxLilJeepXx said:
I'm using this on a Moto g⁷ Play in the USA, currently it's pretty stable. As for what's at stake, you lose access to Bluetooth audio, fingerprint & faceunlock unless you have SD card formated as portable storage and manage to get magisk working. There's a fix for Bluetooth Audio with magisk or ADB but I don't remember what the command was. Also as for magisk you should be able to fix atleast faceunlock because Motorola uses an app for it.
Click to expand...
Click to collapse
Thank you very much for sharing. I await your further results if any new issues arise to proceed with installing Lineage OS 17

Good job with the notch feels good to swipe down properly I’m encountering a issue the captive login appears to be broken I can’t sign into any WiFi’s that need a portal entry the portal screen doesn’t come up also I found how to get magisk to work properly With twrp u need the newest canary version and u have to patch directly (have recovery option enabled) which u use the root of this rom to achieve that after that backup boot image in twrp which will leave it with the magisk patched and twrp after reinstall the rom remove the phh root and restore yeh boot image in twrp and reboot to recovery from twrp and install magisk manager just note it’s lineage that makes magisk act up hence certain apps not obtaining root is lineage fault cause with another GSI like havoc which this method works for also (works with all GSIs to my knowledge) there no root app issues or modules not working just noticed that on lineage

workin on fixing phone
yashor said:
Thank you very much for sharing. I await your further results if any new issues arise to proceed with installing Lineage OS 17
Click to expand...
Click to collapse
phone no longer working because of trying to install magisk but I'll be trying to fix with LMSA and then using @PoochyX's instructions tomorrow
Edit: LMSA is now Rescue and Smart Assistant, I just tried to restore it with this but it needs to be on stock firmware to restore.

XxLilJeepXx said:
phone no longer working because of trying to install magisk but I'll be trying to fix with LMSA and then using @PoochyX's instructions tomorrow
Edit: LMSA is now Rescue and Smart Assistant, I just tried to restore it with this but it needs to be on stock firmware to restore.
Click to expand...
Click to collapse
Why not just boot into bootloader mode and fast boot stock firmware to recover your device ?

PoochyX said:
Good job with the notch feels good to swipe down properly I’m encountering a issue the captive login appears to be broken I can’t sign into any WiFi’s that need a portal entry the portal screen doesn’t come up also I found how to get magisk to work properly With twrp u need the newest canary version and u have to patch directly (have recovery option enabled) which u use the root of this rom to achieve that after that backup boot image in twrp which will leave it with the magisk patched and twrp after reinstall the rom remove the phh root and restore yeh boot image in twrp and reboot to recovery from twrp and install magisk manager just note it’s lineage that makes magisk act up hence certain apps not obtaining root is lineage fault cause with another GSI like havoc which this method works for also (works with all GSIs to my knowledge) there no root app issues or modules not working just noticed that on lineage
Click to expand...
Click to collapse
Hi,
From your experience which GSI is better for MOTO G7 Play 1952-2:
Havoc or Lineage ?

It depends on what u trying to do exactly if u a heavy Magisk user u want to stay away from lineage and use havoc since magisk plays well with it if u don’t care about magisk and just want a simple root then this rom be a good experience for other then rom WiFi portal issues this rom it’s excellent cause it’s the only one with the notch fix if that fix was easily implemented out this rom and could be used with another GSI that would of been fantastic...

PoochyX said:
It depends on what u trying to do exactly if u a heavy Magisk user u want to stay away from lineage and use havoc since magisk plays well with it if u don’t care about magisk and just want a simple root then this rom be a good experience for other then rom WiFi portal issues this rom it’s excellent cause it’s the only one with the notch fix if that fix was easily implemented out this rom and could be used with another GSI that would of been fantastic...
Click to expand...
Click to collapse
Thank you for your reply.
I favor stability and performance over Magisk.
In my case, do your recommend Lineage as my best option to try?

[Mod] Secured ScreenShot Mod for K20Pro Rom

Hello Guys,
We know, Some App in Our Devices doesn't allow us to Take ScreenShot.
and We See an error saying "Couldn't Take Screenshot" OR Similar.
I'm Creating This Post Because I haven't Found Any. (I'll try to make it Up to date, Specially for whichever ROM I'll be Using in the Future).
So I Made a Magisk Module using The Smali Patcher
It will allow the User to Take ScreenShot in Protected Apps.
Just Flash it From MAgisk and Enjoy
Currently Only Available for Xiaomi EU Beta 21.5.12 ROM
Download Link:- Click Here
If you Want to Make For Your Device/Rom, You Can Use Smali Patcher,
Follow The Instructions from The Post. Click Here.
Please Comment Down for Issues OR Suggestions.
You can Contact Me on Telegram @itspdp
Click on That Thank Button, If It was Helpful.

Thanks, interesting
I remember I encountered an app or two not allowing screenshots - but I forgot now, can you please tell which apps to test with
Btw, I have Mi 9T (not Pro) and Xiaomi.eu 21.5.20 (davinci was 'delayed' a week later than your raphael), but I think the module should work as well
Btw, as I can see, changes should be systemless, hence if anything goes wrong just disabling the module (and reatarting the phone) should be enough to go back to 'normal'

Y
zgfg said:
Thanks, interesting
I remember I encountered an app or two not allowing screenshots - but I forgot now, can you please tell which apps to test with
Btw, I have Mi 9T (not Pro) and Xiaomi.eu 21.5.20 (davinci was 'delayed' a week later than your raphael), but I think the module should work as well
Btw, as I can see, changes should be systemless, hence if anything goes wrong just disabling the module (and reatarting the phone) should be enough to go back to 'normal'
Click to expand...
Click to collapse
Yes Everything will be Systemless, we can try, if anything goes wrong we can remove that module (Even from Recovery)
Use The Smali Patcher to Make Modulw for Your Device.
(Link and Tutorial already inside the post),
It's easy and will take about 5-10 minutes only.
P.s. :- This Module is Device and Rom (Including Version) Specific, You Have Make For Your Own Rom/Device amd Update it with Each OTA Update of Your Rom.

After some troubles with the PC, I was able to run Smali Patcher to create a module for my Mi 9T, Xiaomi eu 21.5.20 - do you know please a (system) apk in Xiaomi.eu that does not allow screenshots, that I can test with and without the module, to check does it work

zgfg said:
After some troubles with the PC, I was able to run Smali Patcher to create a module for my Mi 9T, Xiaomi eu 21.5.20 - do you know please a (system) apk in Xiaomi.eu that does not allow screenshots, that I can test with and without the module, to check does it work
Click to expand...
Click to collapse
Try Chrome incognito mode

ca_guri01 said:
Try Chrome incognito mode
Click to expand...
Click to collapse
Thanks, I tried Chrome Incognito window with the my Smali patch module disabled and it complained that screenshots are not allowed
I enabled the module, rebooted and tried again, and it successfully made the screenshot
Thanks, it works (Mi 9T, Xiaomi.eu 21.5.20, Magisk v23)

I don't know what's wrong now - I tried to repeat everything with Xiaoni eu 21.6.9:
- Connected again my phone to (the same PC), ran SnaliPatcher (as admin) again, successfully created a module for Secure Screenshot
- Module installls from Magisk app with no errors (everyrthing the same as when did first time for 21.5.20)
But when I reboot, it fails and after a long time staying on MIUI splash screen, it eventually reboots to TWRP.
I have to remove the module to be able to boot
Tried two times (rebuilding the module by SmaliPatcher, installing the new module), no success

zgfg said:
I don't know what's wrong now - I tried to repeat everything with Xiaoni eu 21.6.9:
- Connected again my phone to (the same PC), ran SnaliPatcher (as admin) again, successfully created a module for Secure Screenshot
- Module installls from Magisk app with no errors (everyrthing the same as when did first time for 21.5.20)
But when I reboot, it fails and after a long time staying on MIUI splash screen, it eventually reboots to TWRP.
I have to remove the module to be able to boot
Tried two times (rebuilding the module by SmaliPatcher, installing the new module), no success
Click to expand...
Click to collapse
Managed to make the module again with Xiaomi.eu 21.6.16:
- I used SmaliPatcher to create the module before (!!!) I installed Magisk.
That is, I installed Xiaomi.eu 21.6.16 and used SmaliPatcher to create the module for Secure Screenshot, only then I installed Magisk and finally installed my SmaliPatcher module - it boots properly to Magisk and Secure Printing works
I think this is the same way I also successfully used SmaliPatcher with Xiaomi.eu 21.5.20
However, when I was on Xiaomi.eu 21.6.9 and when I reported a bootloop, I did it by slightly different order:
- I upgraded to 21.6.9 and immediately installed Magisk, then I used SmaliPatcher to create the module, installed the module and rebooted, but instead of to system it eventually booted to Recovery (TWRP)

This is actually what I was looking for. Btw some apps don't allow us to copy / paste, could you help me with this problem?

verydp1 said:
This is actually what I was looking for. Btw some apps don't allow us to copy / paste, could you help me with this problem?
Click to expand...
Click to collapse
Settings, Apps, find your app, Permissions and enable Access items in the clipboard

this give me a bootloop, anyone know other apps that can do Secured ScreenShot

remorze said:
this give me a bootloop, anyone know other apps that can do Secured ScreenShot
Click to expand...
Click to collapse
Magisk module as attached to OP post will work for you only if you have Mi 9T Pro/Redmi K20 Pro with Xiaomi.eu 21.5.20 (exactly that build)
Otherwise you have to install SmaliPatcher to PC, connect to your phone and follow instructions for the patcher to make yourself the Magisk module for your phone
I don't have Pro but 'plain' Mi 9T, and I'm on newer Xiaomi.eu builds, hence I had to do myself Magisk modules three times (Xiaomi.eu weekly releases).
First time it worked fine for me, next time I also had the bootloop when I made and installed the module (AFAIK, I was following the same patching procedure, with the same phone and PC, hence I don't understand why that time I had a problem). Third time again everything was ok (I got the module for Magisk that does not produce bootloop and it 'unlocks' screenshoting from the apps otherwise not allowing)

New !! Root Samsung Galaxy S10 Lite Android 12 oneui 4.1 (G770FXXU6GVD1)

Root S10 Lite Android 12 oneui 4.1 (G770FXXU6GVD1) :
1. Unlock your bootloader.
2. Reboot to download mode and flash " G770F U6 Android 12 ROOT (G770FXXU6GVD1).tar " in ODIN3 AP slot and reboot.
3. Install Magisk apk after flash the file
4. Done and Enjoy
Download :
G770F U6 Android 12 ROOT (G770FXXU6GVD1).tar
drive.google.com

Thx

daynasour said:
Root S10 Lite Android 12 oneui 4.1 (G770FXXU6GVD1) :
1. Unlock your bootloader.
2. Reboot to download mode and flash " G770F U6 Android 12 ROOT (G770FXXU6GVD1).tar " in ODIN3 AP slot and reboot.
3. Install Magisk apk after flash the file
4. Done and Enjoy
Download :
G770F U6 Android 12 ROOT (G770FXXU6GVD1).tar
drive.google.com
Click to expand...
Click to collapse
Hey would you be willing to check in termux if you can switch selinux to permissive? I'm still on 4.0 and for whatever reason Samsung left permissive mode on OneUi 4.0 on S10 lite and Tab S6 4.1. I would love to update to 4.1 ui but I want to make sure I can switch selinux to permissive.
If you don't know how it's su enter to give terminal root access.
Then type setenforce 0 enter to set permissive
Then type getenforce to check if it's permissive or enforcing.
Type setenforce 1 to enable enforcing again
If your worried about security just switch it back and it will go right back to enforcing. You can also use selinux switch app to do this also but you'll need terminal to check Selinux anyway.
Thanks

Techguy777 said:
Hey would you be willing to check in termux if you can switch selinux to permissive? I'm still on 4.0 and for whatever reason Samsung left permissive mode on OneUi 4.0 on S10 lite and Tab S6 4.1. I would love to update to 4.1 ui but I want to make sure I can switch selinux to permissive.
If you don't know how it's su enter to give terminal root access.
Then type setenforce 0 enter to set permissive
Then type getenforce to check if it's permissive or enforcing.
Type setenforce 1 to enable enforcing again
If your worried about security just switch it back and it will go right back to enforcing. You can also use selinux switch app to do this also but you'll need terminal to check Selinux anyway.
Thanks
Click to expand...
Click to collapse
Yes you can

pan_droid said:
Yes you can
Click to expand...
Click to collapse
Thank you I almost missed your reply. So what firmware are you on.

Techguy777 said:
Thank you I almost missed your reply. So what firmware are you on.
Click to expand...
Click to collapse
Hi mate, sorry for my question.
permissive?
what is it for?

mezacorleehone said:
Hi mate, sorry for my question.
permissive?
what is it for?
Click to expand...
Click to collapse
Permissive is the kernel security normally kernels are set to enforcing and that makes them more secure but I couldn't tell you how.
Enforcing used to really suck because root apps have a hard time working. The biggest reason is viper4android it works way better in permissive mode. That's the only way I can listen to music anymore with viper. It will work on enforcing but it's just better with permissive same with lsposed. Back in the day with just xposed more features would work. To be honest there's really only 1 reason to use viper4android smoothly because everything else now works fine on enforcing

Techguy777 said:
Permissive is the kernel security normally kernels are set to enforcing and that makes them more secure but I couldn't tell you how.
Enforcing used to really suck because root apps have a hard time working. The biggest reason is viper4android it works way better in permissive mode. That's the only way I can listen to music anymore with viper. It will work on enforcing but it's just better with permissive same with lsposed. Back in the day with just xposed more features would work. To be honest there's really only 1 reason to use viper4android smoothly because everything else now works fine on enforcing
Click to expand...
Click to collapse
very good colleague
Thank you for taking the time to explain to me.
I understand about Viper, I can't live without it.
Unfortunately for my country Mexico
only the s9 , note 9 , s10 lite
integrate with unlocked snapdragon
the other flagships are exynos
I would like to pass *s10 + (variants)
*N10 (variants)
*s20
*s20 faith
*s21 faith
with Snapdragon variants
but unfortunately they are only in the E.U (USA) and have the manager blocked = no root = no viper.

Hello colleagues Can someone tell me how to root well explained, I'm confused, here it only says to flash the zip. but the vbmeta_disabled? multidisabler-samsung-3.1 ? I am trying to root from 0 , odin , I'd appreciate your help

If we are already rooted in android 11, with Twrp, we should still install original Android 12 unrooted and start again?
Are we gonna earn anything from android 12, or it's better not to upgrade (and do all this..).
Thanks,

sosimple said:
If we are already rooted in android 11, with Twrp, we should still install original Android 12 unrooted and start again?
Are we gonna earn anything from android 12, or it's better not to upgrade (and do all this..).
Thanks,
Click to expand...
Click to collapse
No I was happy with Android 12 it comes with a stock kernel you can switch to permissive and that's a plus. You don't lose anything and there are more camera features and effects. I would recommend extracting the firmware and patching the boot with magisk v25.1 works I wanted to check because magisk has been bootlooping a lot lately. Then install the twrp and make a backup.
When you go to restore it'll say swipe to continue. Swipe it like it says then your backup will show. Android 12.1 is slightly better but not to much

hello colleagues I am in android 12 OneUI 4.1
install root from this thread, and yes, it allowed me to root my s10 Lite, but I can't remove apps from my partition. I think my memory is encrypted
So I did it my way.
(everything is without starting the operating system.)
1*Install from scratch OneUi 4.1 (odin)
2*vbmeta_disabled (ODIN)
3*twrp-3.6.0_11-4_afaneh92-r5q (ODIN)
4*I go into Twrp mode, format Data , write yes
5* Reboot again Recovery mode
6*install multidisabler-samsung-3.1
7*I install Magiks 25.0.zip
8* now if I start the operating system
I can modify and remove apps installed on the system.
Of course the kernel remains enforcing (I don't know how to change it to permissive)
If someone can tell me the correct root mode that would be great, but at the moment this works for me...

Techguy777 said:
No I was happy with Android 12 it comes with a stock kernel you can switch to permissive and that's a plus. You don't lose anything and there are more camera features and effects. I would recommend extracting the firmware and patching the boot with magisk v25.1 works I wanted to check because magisk has been bootlooping a lot lately. Then install the twrp and make a backup.
When you go to restore it'll say swipe to continue. Swipe it like it says then your backup will show. Android 12.1 is slightly better but not to much
Click to expand...
Click to collapse
Techguy777 said:
No I was happy with Android 12 it comes with a stock kernel you can switch to permissive and that's a plus. You don't lose anything and there are more camera features and effects. I would recommend extracting the firmware and patching the boot with magisk v25.1 works I wanted to check because magisk has been bootlooping a lot lately. Then install the twrp and make a backup.
When you go to restore it'll say swipe to continue. Swipe it like it says then your backup will show. Android 12.1 is slightly better but not to much
Click to expand...
Click to collapse
hello colleague
I was struck by what you wrote
***You don't lose anything and there are more camera features and effects.
and about patching things..

Techguy777 said:
No I was happy with Android 12 it comes with a stock kernel you can switch to permissive and that's a plus. You don't lose anything and there are more camera features and effects. I would recommend extracting the firmware and patching the boot with magisk v25.1 works I wanted to check because magisk has been bootlooping a lot lately. Then install the twrp and make a backup.
When you go to restore it'll say swipe to continue. Swipe it like it says then your backup will show. Android 12.1 is slightly better but not to much
Click to expand...
Click to collapse
magick
when rotating with this method,
i have magicks 24.2
and everything normal, but it asks me to update to 25.1 and in automatic it does not start the bootloop operating system
I put magik 24.2 back on and it's back to normal
I clarify this happened to me when I do it with this method, currently I did it my way and as I could and this does not happen to me anymore ..

Hey bro, i tried it, its work, but if restart phone, show the alarm this phone use not official file ....

[OOS13] IN2023_11_F.13 Patched boot.img

Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
fastboot flash boot IN2023_11_F13-Patched.img
Click to expand...
Click to collapse
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive

Thanks for this. Where can you download the oos13 firmware?

MR0808 said:
Thanks for this. Where can you download the oos13 firmware?
Click to expand...
Click to collapse
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features

Thanks. Looks like I'm getting IN2025, so will have to do the patched boot.img myself.
Time to find my old notes somewhere

Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF

GhostRider86 said:
Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF
Click to expand...
Click to collapse
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know

Neil_Armstrong_ said:
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know
Click to expand...
Click to collapse
I keepted mine as well, SafetyNet and gPay are working, but Unlock with Fingerprint Sensor is not. No reaction to sensor at all, not able to register new Finger...
Edit: Working now. Needed to disable USNF module, no reboot, Fingerprint Sensor working, register Fingers, screen lock, test, enable USNF module, enjoy

Neil_Armstrong_ said:
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features
Click to expand...
Click to collapse
I already have the fil, but I can't install it from system update apk,
am I missing something ?
EDIT:
re-downloaded the file again from Oxygen updater, but still it fails to install nd also "verification failed" in system local update.
Edit 2:
I re MSM back to OOS11 and upgraded directly to OOS 13 F3.

Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works

Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help

VBBoston said:
Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help
Click to expand...
Click to collapse
I updated from oos 13 unrooted. Lost my root using oos12

I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~

VBBoston said:
I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~
Click to expand...
Click to collapse
They have already been shared here.

Thank you very much!

stell52 said:
Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works
Click to expand...
Click to collapse
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated

Neil_Armstrong_ said:
Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive
Click to expand...
Click to collapse
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks

MrBloB said:
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated
Click to expand...
Click to collapse
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know

MrBloB said:
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks
Click to expand...
Click to collapse
Flash Universal SafetyNet module in magisk (kdrag0n) and Magisk Bootloop Protector (just in case)
Check your status after a reboot with YASNAC from Play Store
Force the Magisk DenyList, and when configuring it, develop the apps and check all the tick boxes manually (to be sure)
Uninstall Netflix and install the latest .apk from APKMirror, can't help as other app (banking too) works fine

Isn't vanced dead ?
YouTube Premium Argentina is very affordable fyi ....
stell52 said:
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know
Click to expand...
Click to collapse

stell52 said:
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
Click to expand...
Click to collapse
Yes i have done this. Tried shamiko as well. M passing safetynet checks, still it doesnt work.