This is the new update 10.3.0, for indian 7Ts HD1901, i got this zip from device update itself
OTA rom - https://drive.google.com/open?id=14eM8AzKKeht6i_zHw8lvSaRoknN90PPk
you need payload dumper to open and extract payload.bin to get .imgs of roms
patched boot image - https://www.androidfilehost.com/?fid=4349826312261679634
use this guide to root your 7T using above img - https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
this is same as the new 10.0.7 for the global/eu versions
Can you please share original boot image from 10.0.7??? payload dumper gives me error.
sagardakua said:
Can you please share original boot image from 10.0.7??? payload dumper gives me error.
Click to expand...
Click to collapse
here it is https://drive.google.com/open?id=1eagdkkAMeaav2AtBI9b7b3m6_LQ-vLH6
this is for indian hd1901, so dont complain to me if you flash this on some another model and get error
I am on the indian variant. Used the above img file and flashed via fastboot. The phone booted fine. Went to Magisk and direct installed it. I hit reboot and i get stuck at the bootloader screen. Any help?
sathya said:
I am on the indian variant. Used the above img file and flashed via fastboot. The phone booted fine. Went to Magisk and direct installed it. I hit reboot and i get stuck at the bootloader screen. Any help?
Click to expand...
Click to collapse
as in fastboot screen or bootloader unlocked screen?
also you dont flash, you boot the image
"fastboot boot patched.img"
maybe try flashing the stock img to restore and try again "fastboot flash boot boot.img" (or do i proper restore via fastboot if that doesnt work, there's a guide here for that)
levai_spencer said:
as in fastboot screen or bootloader unlocked screen?
also you dont flash, you boot the image
"fastboot boot patched.img"
maybe try flashing the stock img to restore and try again "fastboot flash boot boot.img" (or do i proper restore via fastboot if that doesnt work, there's a guide here for that)
Click to expand...
Click to collapse
Sorry, my bad. I used the boot command to boot the img but i am getting stuck at the bootloader post i install magisk. Here is what i did.
Entered Fastboot mode
Through ADB, i used "fastboot boot magisk_patched.img
The phone booted fine
Opened Magisk as i was already rooted before
Clicked on Install
Selected "Direct Install"
Rebooted my phone
Stuck at the bootloader warning screen
Unless i load the image again via fastboot, it wont let me in. Hence i am not able to root
sathya said:
Sorry, my bad. I used the boot command to boot the img but i am getting stuck at the bootloader post i install magisk
Click to expand...
Click to collapse
are you booting or flashing? its a 2 different things...
levai_spencer said:
are you booting or flashing? its a 2 different things...
Click to expand...
Click to collapse
My apologies, i used the wrong term. I edited my post and explained what i am exactly doing above. I am booting not flashing.
sathya said:
My apologies, i used the wrong term. I edited my post and explained what i am exactly doing above. I am booting not flashing.
Click to expand...
Click to collapse
its a well known magisk bug, i also faced such situation hence i asked,
you can either try to flash stock img using
"fastboot flash boot boot.img"
or follow this guide to restore
https://forum.xda-developers.com/oneplus-7t/how-to/rom-stock-fastboot-roms-oneplus-7t-t3979213
i was able to fix using above guide
(backup before you continue to be safe)
I'll update the patched boot img just in case
levai_spencer said:
i also faced such situation hence i asked,
you can either try to flash stock img using
"fastboot flash boot boot.img"
or follow this guide to restore
https://forum.xda-developers.com/oneplus-7t/how-to/rom-stock-fastboot-roms-oneplus-7t-t3979213
i was able to fix using above guide
(backup before you continue to be safe)
Click to expand...
Click to collapse
If i boot the original image, i wont be able to root my phone right?
Should i again boot the image you have shared?
sathya said:
If i boot the original image, i wont be able to root my phone right?
Should i again boot the image you have shared?
Click to expand...
Click to collapse
yes, booting stock boot img will remove root, once you fix the problem, you can follow same root guide and patched img to root the phone again
sathya said:
If i boot the original image, i wont be able to root my phone right?
Should i again boot the image you have shared?
Click to expand...
Click to collapse
also, make sure to use same 10.3.0 files to restore your phone using the restore guide i gave (assuming you updated to 10.3.0)
Ok, i followed the procedure. That didnt work. I wiped completely and used your image. As soon as i install magisk, i get stuck in bootloader warning screen. I guess there is no way out to root this new indian firmware.
sathya said:
Ok, i followed the procedure. That didnt work. I wiped completely and used your image. As soon as i install magisk, i get stuck in bootloader warning screen. I guess there is no way out to root this new indian firmware.
Click to expand...
Click to collapse
did you try restore using the guide i gave? i used this guide to fix bootloader stuck
you'll need to download the ota file linked, extract zip, use payload dumper to get imgs, and flash all imgs according to the guide
you can also create your own magisk patched image, thats how i got mine and my 7T is rooted on 10.3.0
okay you can do this if flashing my patched img is causing issues
if you have an old 10.0.6 patched img, use that to get root
i got this one from xda, i was able to also root using that
Ok. I tried pretty much everything. But i am just getting stuck at the bootloader warning screen.
I tried the old 10.0.6 but it doesnt get out of fastboot
sathya said:
Ok. I tried pretty much everything. But i am just getting stuck at the bootloader warning screen.
I tried the old 10.0.6 but it doesnt get out of fastboot
Click to expand...
Click to collapse
did u try to wipe data/internal in recovery?
Related
Hi all,
*I've unlocked bootloader
* Have tried fastboot boot TWRP.img, as well as tried flashing TWRP RC1 via the Skipsoft toolkit.
Every way I've tried the phone just sits at the TWRP boot screen and doesn't allow me to go any further..
Any help here would be truly appreciated!
Cheers,
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
dutchy716 said:
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
Click to expand...
Click to collapse
You're braver than me. I haven't had my Pixel XL long but this is the first phone I've ever owned where I am afraid to try and install a custom recovery and ROM. With the dual partitions and what I hear about TWRP still being buggy it just seems like Google didn't want people to run anything but pure Android on the Pixels.
dutchy716 said:
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
Click to expand...
Click to collapse
Same issue here, but no solution. Adding a lockscreen pin didn't change anything for me. I just get a teamwin image but it just sits there & doesn't actually open TWRP. My bootlocker is unlocked but thats as far as I can get 7.1.2 with May security. I have tried reloading everything and followed commonly recommended steps.
Any suggestions greatly appreciated. I would love to get this thing rooted and get some ROM flexibility - even to just get rid of the Nav Bar ....
mikefnz said:
Same issue here, but no solution. Adding a lockscreen pin didn't change anything for me. I just get a teamwin image but it just sits there & doesn't actually open TWRP. My bootlocker is unlocked but thats as far as I can get 7.1.2 with May security. I have tried reloading everything and followed commonly recommended steps.
Any suggestions greatly appreciated. I would love to get this thing rooted and get some ROM flexibility - even to just get rid of the Nav Bar ....
Click to expand...
Click to collapse
I have never had a problem. Make sure your using the rc1 fast boot TWRP. Should be fastboot boot twrp.img. I change file name to this or copy and paste. Then you install rc1 or rc2 zip.
I know you will have problems if you try to install the wrong file.
mac796 said:
I have never had a problem. Make sure your using the rc1 fast boot TWRP. Should be fastboot boot twrp.img. I change file name to this or copy and paste. Then you install rc1 or rc2 zip.
I know you will have problems if you try to install the wrong file.
Click to expand...
Click to collapse
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
mazubo said:
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
Click to expand...
Click to collapse
Hmm are you on may bootloader because i think modifying the boot partition causes bootloop without the boot signature?
XtraArrow said:
Hmm are you on may bootloader because i think modifying the boot partition causes bootloop without the boot signature?
Click to expand...
Click to collapse
Yes I am.. should I downgrade to 7.1.1? Tjere was no mention of that issue in the skipsoft toolkit thread... Weird!
mazubo said:
Yes I am.. should I downgrade to 7.1.1? Tjere was no mention of that issue in the skipsoft toolkit thread... Weird!
Click to expand...
Click to collapse
Sure, i guess.. or you could just manually flash the April bootloader. a lot easier.
XtraArrow said:
Sure, i guess.. or you could just manually flash the April bootloader. a lot easier.
Click to expand...
Click to collapse
Ok, would flashing just the bootloader wipe the phone? Also how would I find just the bootloader? Thanks for the suggestion, I haven't flashed just a bootloader before..
mazubo said:
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
Click to expand...
Click to collapse
That strange. I just flash a factory image from Google
Set up a security pattern
Enable adb debugging
Fastboot boot twrp 3.0.2-0 rc1 IMG
Make sure it asks for your security pattern if it doesn't reboot to bootloader and fastboot twrp again, and keep repeating until it does
Install twrp 3.1.0.0 rc2 or rc1 zip
If your using may bootloader's fish VBS 6 zip
And it should stick, if you flash. Anything else that messes with boot flash that VBS zip at the end again
mazubo said:
Ok, would flashing just the bootloader wipe the phone? Also how would I find just the bootloader? Thanks for the suggestion, I haven't flashed just a bootloader before..
Click to expand...
Click to collapse
If you download the offiial april firmware, you can manually extract it from the .zip then you would do this command in fastboot :--------- fastboot flash bootloader PUTFILEHERE.img
EDIT: Are you able to get into TWRP by any chance??
mac796 said:
That strange. I just flash a factory image from Google
Set up a security pattern
Enable adb debugging
Fastboot boot twrp 3.0.2-0 rc1 IMG
Make sure it asks for your security pattern if it doesn't reboot to bootloader and fastboot twrp again, and keep repeating until it does
Install twrp 3.1.0.0 rc2 or rc1
If your using may bootloader's fish VBS 6 zip
And it should stick, if you flash. Anything else that messes with boot flash that VBS zip at the end again
Click to expand...
Click to collapse
Hmm, maybe this is where I've gone wrong.. I thought the need to create a security pin/pattern was only if coming from a previously rooted state, or from a custom ROM. I will try this as well and report back.. thanks!
XtraArrow said:
If you download the offiial april firmware, you can manually extract it from the .zip then you would do this command in fastboot :--------- fastboot flash bootloader PUTFILEHERE.img
EDIT: Are you able to get into TWRP by any chance??
Click to expand...
Click to collapse
Unable to get into twrp as previously mentioned. I flash the IMG file, then it just hangs on the TWRP boot screen..
mazubo said:
Unable to get into twrp as previously mentioned. I flash the IMG file, then it just hangs on the TWRP boot screen..
Click to expand...
Click to collapse
Alright, try doing what I mentioned. Download April firmware, extract the bootloader.img from it and flash using command above.
XtraArrow said:
Alright, try doing what I mentioned. Download April firmware, extract the bootloader.img from it and flash using command above.
Click to expand...
Click to collapse
This seems likely to work. Thanks for the suggestions, and I'll report back! Cheers!
mazubo said:
This seems likely to work. Thanks for the suggestions, and I'll report back! Cheers!
Click to expand...
Click to collapse
I'm no expert but it's seems like a decent suggestion. Let us know how it goes.
@mazubo
You keep stating that you just flash the image. Are you flashing it from the bootloader then trying to boot to recovery?
You have to boot TWRP from your PC first. Then from TWRP you can then "flash" TWRP.
Just wanted to make sure that was a step you were taking!
Just wait. It will take little longer
Sent from my Pixel XL using Tapatalk
freddy0872 said:
@mazubo
You keep stating that you just flash the image. Are you flashing it from the bootloader then trying to boot to recovery?
You have to boot TWRP from your PC first. Then from TWRP you can then "flash" TWRP.
Just wanted to make sure that was a step you were taking!
Click to expand...
Click to collapse
Yes, I have tried fastboot to flash the TWRP img, as well as skipsofts toolkit. I guess I've been using the term "flash" for fastboot, as I haven't been able to use twrp yet.. I understand that you need to flash the TWRP img via pc and then flash the TWRP zip, then SuperSU or magisk, whatever your poison may be !
Hi, I manually updated my honor 7x (BND AL10 INDIAN) to EMUI 8 following the other post in this forum and after that I went on to flash TWRP recovery again from another post "complete_twrp_ramdisk.img" so that I could take full Nand backups and what not. But Here's the problem, When I try to flash the stock recovery back "BND_RECOVERY_NOcheck" which I flashed during upgrading to EMUI 8, it says "size of image is large than target device"
I tried this using boot fastboot command "fastboot flash recovery_ramdisk recovery.img" and also using the TWRP. It doesn't work either way. So I'm basically stuck with TWRP. The reason I want stock recovery is because
1. I can install OTA UPDATES on EMUI 8 (I actually got one)
2. I may want to just be on complete stock like locked bootloader, sock recovery etc...
Could any one help?? Maybe I need the right stock recovery file ?
BTW It's my first post ever so please go easy if I did any mistakes.
Could you share your twrp? Thanks!
Thetpcguy said:
Hi, I manually updated my honor 7x (BND AL10 INDIAN) to EMUI 8 following the other post in this forum and after that I went on to flash TWRP recovery again from another post "complete_twrp_ramdisk.img" so that I could take full Nand backups and what not. But Here's the problem, When I try to flash the stock recovery back "BND_RECOVERY_NOcheck" which I flashed during upgrading to EMUI 8, it says "size of image is large than target device"
I tried this using boot fastboot command "fastboot flash recovery_ramdisk recovery.img" and also using the TWRP. It doesn't work either way. So I'm basically stuck with TWRP. The reason I want stock recovery is because
1. I can install OTA UPDATES on EMUI 8 (I actually got one)
2. I may want to just be on complete stock like locked bootloader, sock recovery etc...
Could any one help?? Maybe I need the right stock recovery file ?
BTW It's my first post ever so please go easy if I did any mistakes.
Click to expand...
Click to collapse
"BND_RECOVERY_NOcheck" is nouget stock recovery.
Oreo update replaces all the partitions, including the recovery that you flashed in order to install the update.
The stock recovery can be extracted from "update.app" , the one inside the oreo "updateL22.zip"
holds said:
Could you share your twrp? Thanks!
Click to expand...
Click to collapse
It's here https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500
mrmazak said:
"BND_RECOVERY_NOcheck" is nouget stock recovery.
Oreo update replaces all the partitions, including the recovery that you flashed in order to install the update.
The stock recovery can be extracted from "update.app" , the one inside the oreo "updateL22.zip"
Click to expand...
Click to collapse
Hi, I'm downloading that UPDATEL22.ZIP right now and Can I extract this with any unzip/unrar program? What will be the name of that recovery? is it going to be "recovery"? The thing is I've never extracted anything from a ROM so I have not idea.
Thetpcguy said:
Hi, I'm downloading that UPDATEL22.ZIP right now and Can I extract this with any unzip/unrar program? What will be the name of that recovery? is it going to be "recovery"? The thing is I've never extracted anything from a ROM so I have not idea.
Click to expand...
Click to collapse
you should already have the update.zip.
use same one you "manualy" installed.
winrar did not work for me but 7-zip did.
there is also rom extractor built into "multi-tool" and stand alone extractor around here some where.
I found it here
the name is just like the twrp you flashed and just like the partition that you flashed. (recovery_ramdisk.img)
Thetpcguy said:
Hi, I'm downloading that UPDATEL22.ZIP right now and Can I extract this with any unzip/unrar program? What will be the name of that recovery? is it going to be "recovery"? The thing is I've never extracted anything from a ROM so I have not idea.
Click to expand...
Click to collapse
Hi, so I figured Huawei update extractor app is the way to do it but I have a Mac and there doesn't seem to be a Mac version? is there a way to do it on android or Mac?
mrmazak said:
you should already have the update.zip.
use same one you "manualy" installed.
winrar did not work for me but 7-zip did.
there is also rom extractor built into "multi-tool" and stand alone extractor around here some where.
I found it here
the name is just like the twrp you flashed and just like the partition that you flashed. (recovery_ramdisk.img)
Click to expand...
Click to collapse
Hi, Thanks for all your replies. After doing a bit of search, I managed to get it extracted on my android using zarchiver app and I copied the recovery_ramdisk.img from that BNDL22.ZIP and when I tried flashing it using the fastboot command "fastboot flash recovery_ramdisk recovery.img" It went ok and It got installed but when I tried to boot into recovery, I got this screen "ERROR MODE" ATTENTION ETC.. I don't know where I'm going wrong?
Thetpcguy said:
Hi, Thanks for all your replies. After doing a bit of search, I managed to get it extracted on my android using zarchiver app and I copied the recovery_ramdisk.img from that BNDL22.ZIP and when I tried flashing it using the fastboot command "fastboot flash recovery_ramdisk recovery.img" It went ok and It got installed but when I tried to boot into recovery, I got this screen "ERROR MODE" ATTENTION ETC.. I don't know where I'm going wrong?
Click to expand...
Click to collapse
I dont know.
The new way to boot to recovery was written in other thread as "hold both volume buttons & power button"
not sure if it was a problem with extraction or not, but attached is the recovery I extracted. do not have it installed. I dont even have oreo installed., I'm still pulling files together and reading the update-scripts and trying to convince myself if it is worth trying it.
https://www.androidfilehost.com/?w=files&flid=262391
I have now jumped on board and did oreo conversion on L24, then flashed RR. I went and installed the oreo recovery, then back to this stock recovery. It worked fine for me.
mrmazak said:
I dont know.
The new way to boot to recovery was written in other thread as "hold both volume buttons & power button"
not sure if it was a problem with extraction or not, but attached is the recovery I extracted. do not have it installed. I dont even have oreo installed., I'm still pulling files together and reading the update-scripts and trying to convince myself if it is worth trying it.
https://www.androidfilehost.com/?w=files&flid=262391
I have now jumped on board and did oreo conversion on L24, then flashed RR. I went and installed the oreo recovery, then back to this stock recovery. It worked fine for me.
Click to expand...
Click to collapse
Hi Dude, Great man. Your recovery worked like charm. But I did extract it properly from BNDL22.ZIP and I still don't know why it failed but thanks a ton. I hope this helps out other people reading
Thetpcguy said:
Hi Dude, Great man. Your recovery worked like charm. But I did extract it properly from BNDL22.ZIP and I still don't know why it failed but thanks a ton. I hope this helps out other people reading
Click to expand...
Click to collapse
i am wipeiing my data it always show faild plss help my device is dead
Thetpcguy said:
Hi Dude, Great man. Your recovery worked like charm. But I did extract it properly from BNDL22.ZIP and I still don't know why it failed but thanks a ton. I hope this helps out other people reading
Click to expand...
Click to collapse
Which perticular file should i flash for stock recovery please. There are 4-5 files. Pl help. I am on RR and want to flash system.img to go back to oreo beta. But i think i do not have stock recovery as i had tried to flash twrp. Pl help
Thetpcguy said:
Hi Dude, Great man. Your recovery worked like charm. But I did extract it properly from BNDL22.ZIP and I still don't know why it failed but thanks a ton. I hope this helps out other people reading
Click to expand...
Click to collapse
Hey bro thefe are too many files there will it flash through fastboot or twrp and how to flash one by one pls help me
Hello all,
thanks for all the info in this thread.
I bricked my Honox 7x (BND-LC21) by trying to go Oreo.
The installation went halfway through, but now I can't complete (missing info howto flash bootloader / kernel) and I also can't go back as the partition layout has already changed to oreo style.
Steps done so far:
- unlocked boot loader
- installed twrp
- extract system image and recovery image from oreo update zip
getting the phone in fastboot mode i can successfully run
fastboot flash recovery_ramdisk recovery_ramdisk.img (i can also flash old recoveries this way, but none of them will successfully boot into recovery mode)
fastboot flash system system.img
either way, the system will not boot afterwards.
how do I manually flash bootloader / kernel on the oreo partition layout?
erecovery and hisuite won't recover my phone either...
Any hints appreciated
Aibiman
mrmazak said:
I dont know.
The new way to boot to recovery was written in other thread as "hold both volume buttons & power button"
not sure if it was a problem with extraction or not, but attached is the recovery I extracted. do not have it installed. I dont even have oreo installed., I'm still pulling files together and reading the update-scripts and trying to convince myself if it is worth trying it.
https://www.androidfilehost.com/?w=files&flid=262391
I have now jumped on board and did oreo conversion on L24, then flashed RR. I went and installed the oreo recovery, then back to this stock recovery. It worked fine for me.
Click to expand...
Click to collapse
Can I flash just the stock recovery to my phone and if so is it the recover_ramdis.img, or do I need to flash them all. I'm on mostly stock bnd-l24. Unlocked bootloader TWRP and magisk for root. There's a new update and i wanted to flash stock recovery so I could update.
kingd421 said:
Can I flash just the stock recovery to my phone and if so is it the recover_ramdis.img, or do I need to flash them all. I'm on mostly stock bnd-l24. Unlocked bootloader TWRP and magisk for root. There's a new update and i wanted to flash stock recovery so I could update.
Click to expand...
Click to collapse
Yes that is the recovery.
But if you have root, update not going to work
mrmazak said:
Yes that is the recovery.
But if you have root, update not going to work
Click to expand...
Click to collapse
Will uninstalling magisk fix that or does the boot image have to be reflashed. Thank you for the quick response
kingd421 said:
Will uninstalling magisk fix that or does the boot image have to be reflashed. Thank you for the quick response
Click to expand...
Click to collapse
From magisk manager app should be a restore images option
mrmazak said:
From magisk manager app should be a restore images option
Click to expand...
Click to collapse
Sounds good. I appreciate it.
aibiman said:
Hello all,
thanks for all the info in this thread.
I bricked my Honox 7x (BND-LC21) by trying to go Oreo.
The installation went halfway through, but now I can't complete (missing info howto flash bootloader / kernel) and I also can't go back as the partition layout has already changed to oreo style.
Steps done so far:
- unlocked boot loader
- installed twrp
- extract system image and recovery image from oreo update zip
getting the phone in fastboot mode i can successfully run
fastboot flash recovery_ramdisk recovery_ramdisk.img (i can also flash old recoveries this way, but none of them will successfully boot into recovery mode)
fastboot flash system system.img
either way, the system will not boot afterwards.
how do I manually flash bootloader / kernel on the oreo partition layout?
erecovery and hisuite won't recover my phone either...
Any hints appreciated
Aibiman
Click to expand...
Click to collapse
can you in to TWRP?
Coming to you all with hat in hand.
Not sure what steps to take next.
Unlocked bootloader and all the rest of the steps here:
https://www.xda-developers.com/google-pixel-3-unlock-bootloader-root-magisk/
Symptom is a never ending booting "G".
I reboot and can choose recovery but the twrp screen in unresponsive. As in, I get the slider but cannot slide it.
I'm not sure what that means.
I do see the device and its listed as 'recovery' in adb.
I did see the issue of using old platform tools too late. :crying:
How bleak is my outlook?
Thank you for any help.
When you booted the twrp.img did you have the newest one and then install the newest twrp installer.zip?
Short version... Extract the boot.img from the system image file and install that to both partitions through fastboot (going to have to do some reading on how to do that, and you might learn a bit in the process). System should boot normally then with stock recovery. Now, you can use the current version of the twrp.img to root without even needing to permanently install it. Before you even do that though, spend some time getting to know your device and the current versions and options that are out there. That web page you pointed to was just a primer and was published when the device first came out. Their have been some small changes.
@edmodumb - What billy said^^. From your adb folder you can fastboot flash boot.img, then fastboot boot twrp.img right afterwards to get TWRP back (and the phone will boot System as well).
pixel 3xl unlocked bootloader - installed twrp.img via fastboot- installed twrp.zip in recovery-installed magisk 17.3 via
recovery
phone booted up , no problem then i went to magisk app and installed magisk installed by direct patch and rebooted,
now struck in booloop.
if i boot into recovery twrp is unresponsive even if i reinstall with fastboot.
i tried to install factory image but still stuck in bootloop????
i tried to flash boot.img to the a and b partions with fastboot but no sure if i'm doing it right?
motrac said:
pixel 3xl unlocked bootloader - installed twrp.img via fastboot- installed twrp.zip in recovery-installed magisk 17.3 via
recovery
phone booted up , no problem then i went to magisk app and installed magisk installed by direct patch and rebooted,
now struck in booloop.
if i boot into recovery twrp is unresponsive even if i reinstall with fastboot.
i tried to install factory image but still stuck in bootloop????
i tried to flash boot.img to the a and b partions with fastboot but no sure if i'm doing it right?
Click to expand...
Click to collapse
Flash the boot image to both slots #6 in the guide or flash the factory image #4 in the guide to return to stock. then do #7 in the guide to root. Done! Do not flash the patched_boot.img.
[Guide] Pixel 3 XL Android 9.0 (Pie) Unlock/Root/Install Images/Kernels/Recovery + November 2018 Security Patch
Homeboy76 said:
Flash the boot image to both slots #6 in the guide or flash the factory image #4 in the guide to return to stock. then do #7 in the guide to root. Done! Do not flash the patched_boot.img.
[Guide] Pixel 3 XL Android 9.0 (Pie) Unlock/Root/Install Images/Kernels/Recovery + November 2018 Security Patch
Click to expand...
Click to collapse
i flashed factory and it installs but at the end i get this:
"Erase successful, but not automatically formatting. File system type raw not supported."
is that ok or is it an error?
phone still doesn't boot.
when i flash boot file i get:
"FAILED (remote: Failed to write to partition Not Found)"
motrac said:
i flashed factory and it installs but at the end i get this:
"Erase successful, but not automatically formatting. File system type raw not supported."
is that ok or is it an error?
phone still doesn't boot.
when i flash boot file i get:
"FAILED (remote: Failed to write to partition Not Found)"
Click to expand...
Click to collapse
reflashed factory after updating fastboot and it boots now, good learning lesson for me. thanks for the help
Yikes ! I am not the expert, but . . . . it really sounds like 'rma' time to me...
.
If you do things on a low battery, it'll corrupt stuff. Is this thing fully charged up ?
.
motrac said:
reflashed factory after updating fastboot and it boots now, good learning lesson for me. thanks for the help
Click to expand...
Click to collapse
Homeboy76 said:
Click to expand...
Click to collapse
@motrac @Homeboy76
Woah sounds like my problem is similar --- I can't boot into anything but a dark screen except for bootloader.
I saw the "updated fastboot"
I tried flashing the boot.img and then the factory image
but no luck --- just blackscreen when I try to do anything other than bootloader
I had some errors when flashing factory image -- see screeen shot
jcrompton said:
@[email protected]
Woah sounds like my problem is similar --- I can't boot into anything but a dark screen except for bootloader.
I saw the "updated fastboot"
I tried flashing the boot.img and then the factory image
but no luck --- just blackscreen when I try to do anything other than bootloader
I had some errors when flashing factory image -- see screeen shot
Click to expand...
Click to collapse
Is "updated fastboot" r28.0.1?
Homeboy76 said:
Is "updated fastboot" r28.0.1?
Click to expand...
Click to collapse
Yes.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
Yes.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Still can't boot my device -- just no luck after updating fastboot
PLEASE .. any help would be appreciated!!
This is another place where I was trying to solve the issue - sorry for doubling up
https://forum.xda-developers.com/showpost.php?p=78276952&postcount=258
Resurrecting. Had to set aside for a while, sorry.
@sliding_billy & @v12xke , thank you for the responses. Out of around six phones, this is the first time I've had issues rooting/flashing images. That's thanks to XDA.
After your responses and some more learning (this time paying more attention to post dates), I have the phone back up on its feet.
Off to re-root, wish me luck.
Thank you very much!
I did a backup on twrp and then it wouldn't boot ugh off to try it all again LOL
edmodumb said:
Resurrecting. Had to set aside for a while, sorry.
@sliding_billy & @v12xke , thank you for the responses. Out of around six phones, this is the first time I've had issues rooting/flashing images. That's thanks to XDA.
After your responses and some more learning (this time paying more attention to post dates), I have the phone back up on its feet.
Off to re-root, wish me luck.
Thank you very much!
Click to expand...
Click to collapse
Best of luck!
So i was running Android 10 Nov update rooted WITHOUT TWRP
And i wanted to update to Dec update
So i DLed DEC update factory image took out the -w booted my phone into the bootloader flash-all
It does its thing phone boots up obvi now i dont have root.
I put the bootloader.img onto my phone go into Magisk manager and modify the bootloader then bring it back to the computer.
Boot the phone into bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
phone gets stuck in the G logo with the loading bar
any hints????
after doing some researched i tried it again but this time flashing the patched boot.img to both a and b slots. Still same result
krolla03 said:
So i was running Android 10 Nov update rooted WITHOUT TWRP
And i wanted to update to Dec update
So i DLed DEC update factory image took out the -w booted my phone into the bootloader flash-all
It does its thing phone boots up obvi now i dont have root.
I put the bootloader.img onto my phone go into Magisk manager and modify the bootloader then bring it back to the computer.
Boot the phone into bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
phone gets stuck in the G logo with the loading bar
any hints????
Click to expand...
Click to collapse
krolla03 said:
after doing some researched i tried it again but this time flashing the patched boot.img to both a and b slots. Still same result
Click to expand...
Click to collapse
You stated that you patched the bootloader.img, is that correct?? You need to patch the boot.img, or, was that just a typo on your part?
Did you disable all your magisk modules before you fastbooted the factory image?? If not, then it's very likely that one, or maybe more modules, isn't compatible with the December update. I'll wait for your reply before trying to help solve the problem.
I previously dealt with similar symptoms. You can read about it here -- https://forum.xda-developers.com/showpost.php?p=81102855&postcount=33
Badger50 said:
You stated that you patched the bootloader.img, is that correct?? You need to patch the boot.img, or, was that just a typo on your part?
Did you disable all your magisk modules before you fastbooted the factory image?? If not, then it's very likely that one, or maybe more modules, isn't compatible with the December update. I'll wait for your reply before trying to help solve the problem.
Click to expand...
Click to collapse
OK so stupid me yes i was patching and flashing the bootloader.img not the boot.img.
I just tried flashing the indeed patched boot.img and now im getting the same issue as rustnails. Where it gets stuck at the G logo for a few secs and reboots.
I did not uninstall or disable any of the magisk modulus
how do i do that now that i dont have root?
krolla03 said:
OK so stupid me yes i was patching and flashing the bootloader.img not the boot.img.
I just tried flashing the indeed patched boot.img and now im getting the same issue as rustnails. Where it gets stuck at the G logo for a few secs and reboots.
I did not uninstall or disable any of the magisk modulus
how do i do that now that i dont have root?
Click to expand...
Click to collapse
Fastboot into twrp. Go to advanced, select file manager, go to /data/adb/modules then delete each one of them. Reboot, then go back and fastboot your patched boot.img to regain root :good:
Badger50 said:
Fastboot into twrp. Go to advanced, select file manager, go to /data/adb/modules then delete each one of them. Reboot, then go back and fastboot your patched boot.img to regain root :good:
Click to expand...
Click to collapse
Ok. Before i try that let me just ask this.
Can i just temp boot TWRP to do that
I dont want to install TWRP permanently because ive had mostly trouble with TWRP in the last few android versions.
krolla03 said:
Ok. Before i try that let me just ask this.
Can i just temp boot TWRP to do that
I dont want to install TWRP permanently because ive had mostly trouble with TWRP in the last few android versions.
Click to expand...
Click to collapse
Yep. It'll just be temporary :good:
Badger50 said:
Yep. It'll just be temporary :good:
Click to expand...
Click to collapse
Thanks man. I got it all working again!!!
Hi badger, @Badger50 (Mod Edit: added mention tag)
i have an issue with rooting my device
when I write fastboot flash boot magisk_patched.img I get a message says < waiting for device >
can you please help me to find a solution to my problem?
dark_heroo said:
Hi badger, @Badger50 (Mod Edit: added mention tag)
i have an issue with rooting my device
when I write fastboot flash boot magisk_patched.img I get a message says < waiting for device >
can you please help me to find a solution to my problem?
Click to expand...
Click to collapse
Not sure what your starting point is but:
After installing you fastboot factory image
you can either temporarily or permanently install TWRP (temp TWRP= fastboot twrp.img, install magisk, reboot OR perm TWRP = fastboot twrp.img, install TWRP.zip from witin TWRP)
then you just flash/install magisk in TWRP
In my sig is a link to a detailed step by step guide for all this.
Good luck!
My phone updated to le2125_11_c.61 and I can't find a suitable boot.img to flash magisk. The OTA update has a partial boot image so that fails. Does anyone have a copy of the boot.img for this version, or is there another method I should use?
rustyshakelford2 said:
My phone updated to le2125_11_c.61 and I can't find a suitable boot.img to flash magisk. The OTA update has a partial boot image so that fails. Does anyone have a copy of the boot.img for this version, or is there another method I should use?
Click to expand...
Click to collapse
Just use the C.48 patched image, boot (don't flash), and then direct install Magisk. Should work. If it doesn't, no harm done since you didn't flash it.
EtherealRemnant said:
Just use the C.48 patched image, boot (don't flash), and then direct install Magisk. Should work. If it doesn't, no harm done since you didn't flash it.
Click to expand...
Click to collapse
That was a nice thought, but unfortunately it didn't work. The phone hangs when booting both the magisk'd and regular C.48 image.
I did fastboot boot boot.img. Is that correct? I'm a bit out of practice.
rustyshakelford2 said:
That was a nice thought, but unfortunately it didn't work. The phone hangs when booting both the magisk'd and regular C.48 image.
I did fastboot boot boot.img. Is that correct? I'm a bit out of practice.
Click to expand...
Click to collapse
Yeah that's correct. Bummer that it didn't work. Give me a few to download and patch it.
rustyshakelford2 said:
That was a nice thought, but unfortunately it didn't work. The phone hangs when booting both the magisk'd and regular C.48 image.
I did fastboot boot boot.img. Is that correct? I'm a bit out of practice.
Click to expand...
Click to collapse
Well unfortunately I have downloaded two different python scripts trying to patch the full OTA with the incremental OTA and they are both failing so I guess we will have to wait for someone else to do it because I don't have the expertise to fix this.
As long as your bootloader is unlocked, You could try booting (again not flashing) into TWRP and then try sideloading Magisk (after renaming .apk to .zip) ?
djsubterrain said:
As long as your bootloader is unlocked, You could try booting (again not flashing) into TWRP and then try sideloading Magisk (after renaming .apk to .zip) ?
Click to expand...
Click to collapse
You can't boot into TWRP because it doesn't work on OOS12. It crash dumps.
Someone who is rooted needs to install the OTA and pull the image unless there is a tool I haven't come across that works better for incremental OTA extraction.
The incremental C.61 OTA (downloaded thru Oxygen Updater) ins't getting installed.
The oxygen updater app isn't listing the file and the About device Local Install is throwing Verification failed.
Any idea to fix this ?
LE2121
Thanks
observingi said:
The incremental C.61 OTA (downloaded thru Oxygen Updater) ins't getting installed.
The oxygen updater app isn't listing the file and the About device Local Install is throwing Verification failed.
Any idea to fix this ?
LE2121
Thanks
Click to expand...
Click to collapse
I am also facing the same problem..
rustyshakelford2 said:
My phone updated to le2125_11_c.61 and I can't find a suitable boot.img to flash magisk. The OTA update has a partial boot image so that fails. Does anyone have a copy of the boot.img for this version, or is there another method I should use?
Click to expand...
Click to collapse
Try using the MSM tool for your device, press F8, then select boot_a or boot_b depending on what slot you're in. To check your slot, reboot to fastboot and issue the command fastboot getvar current-slot.
You should be able to then patch the boot.img and flash it normally.
razercortex said:
Try using the MSM tool for your device, press F8, then select boot_a or boot_b depending on what slot you're in. To check your slot, reboot to fastboot and issue the command fastboot getvar current-slot.
You should be able to then patch the boot.img and flash it normally.
Click to expand...
Click to collapse
Getting this phone to actually boot into MSM mode is a nightmare. I either end up in fastboot or it boots up normally. I got it to show up exactly once, but it timed out and booted up before I got the readback going.
rustyshakelford2 said:
Getting this phone to actually boot into MSM mode is a nightmare. I either end up in fastboot or it boots up normally. I got it to show up exactly once, but it timed out and booted up before I got the readback going.
Click to expand...
Click to collapse
Enable USB debugging in settings, then type adb reboot edl.
razercortex said:
Enable USB debugging in settings, then type adb reboot edl.
Click to expand...
Click to collapse
I got it! I managed to readback boot_b using the password "oneplus". I can't seem to find where it saved the file though.
It's in C:\ aka your root drive
razercortex said:
Try using the MSM tool for your device, press F8, then select boot_a or boot_b depending on what slot you're in. To check your slot, reboot to fastboot and issue the command fastboot getvar current-slot.
You should be able to then patch the boot.img and flash it normally.
Click to expand...
Click to collapse
That's a cool trick. I didn't know about that one.
Successfully rooted! Huge thanks to razercortex and others in this thread who helped.
Here is a download of both the unmodified and magisk patched boot.img for e2125_11_c.61 global.
https://www.dropbox.com/s/bpoe31lt022rigj/e2125_11_c.61%20global%20boot.img.zip?dl=1
I booted the patched image via fastboot and then did a magisk direct install. After updating the safetynet fix module and running props I am passing safeteynet. I had to restore props to defaults and then apply the android 11 fingerprint for this phone, otherwise it would fail CTS.
rustyshakelford2 said:
Successfully rooted! Huge thanks to razercortex and others in this thread who helped.
Here is a download of both the unmodified and magisk patched boot.img for e2125_11_c.61 global.
https://www.dropbox.com/s/bpoe31lt022rigj/e2125_11_c.61%20global%20boot.img.zip?dl=1
I booted the patched image via fastboot and then did a magisk direct install. After updating the safetynet fix module and running props I am passing safeteynet. I had to restore props to defaults and then apply the android 11 fingerprint for this phone, otherwise it would fail CTS.
Click to expand...
Click to collapse
Can you please share the steps to get the boot.img
I have to get it from LE2121
gulshanstrider said:
Can you please share the steps to get the boot.img
I have to get it from LE2121
Click to expand...
Click to collapse
You should be able to just boot (don't flash) the 2125 rooted image they posted and then use Magisk to direct install.
EtherealRemnant said:
You should be able to just boot (don't flash) the 2125 rooted image they posted and then use Magisk to direct install.
Click to expand...
Click to collapse
I have an LE2125 on 11_C.61 and when I fastboot the posted patched boot.img file I get Magisk Installed: N/A in Magisk Manager. I even patched the posted boot.img myself in Magisk and get Magisk Installed: N/A when fastbooting that patched boot.img. Any ideas?
TornSack said:
I have an LE2125 on 11_C.61 and when I fastboot the posted patched boot.img file I get Magisk Installed: N/A in Magisk Manager. I even patched the posted boot.img myself in Magisk and get Magisk Installed: N/A when fastbooting that patched boot.img. Any ideas?
Click to expand...
Click to collapse
Did you go to try to direct install? I haven't actually tried C.61 yet, I've got stuff to do this weekend and can't have my phone in an experimental state when I'm trying to call and Uber to get around, so I can't test it myself.