Develop Bugs

320f oreo firmware flash for 320fl

Is there someone who test it already...I like to flash it but odin asking pit file. Odin fail pit security. What I need to do?

flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock

nekos95 said:
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
Click to expand...
Click to collapse
Fail still re-partition. Ask to set pit...

nekos95 said:
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
Click to expand...
Click to collapse
Can u link files u downloaded? re-partition fail

Or do I need pit file to flash

Is wifi working too ?

Can we root Oreo?
And have TWRP also?
And revert back to Nougat if we want?
Excuse me if the questions are asked before..

broky said:
Can we root Oreo?
And have TWRP also?
And revert back to Nougat if we want?
Excuse me if the questions are asked before..
Click to expand...
Click to collapse
Not sure
Yes
Yes

if you want a clean install first install Nougat BL AP CP CSC of your device. After first boot on the settings screen, shutdown the device and go into bootloader mode, select AP from OREO, no other one, only AP. Press start and you A320FL will be upgrade to OREO. I installed Russia Oreo on A320Y
Sorry for my bad english
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I used Odin 3.13.1

Riicardogmz said:
if you want a clean install first install Nougat BL AP CP CSC of your device. After first boot on the settings screen, shutdown the device and go into bootloader mode, select AP from OREO, no other one, only AP. Press start and you A320FL will be upgrade to OREO. I installed Russia Oreo on A320Y
Sorry for my bad english
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I used Odin 3.13.1
Click to expand...
Click to collapse
Hey thanks that works now oreo on my 320fl.

Does it factory reset the phone ? I mean we don't have to put an oreo CSC ?
Just clean flashed nougat...

WiwiPouPou said:
Does it factory reset the phone ? I mean we don't have to put an oreo CSC ?
Just clean flashed nougat...
Click to expand...
Click to collapse
First flash clean nougat and use nougat fles only. When it boot first time where you start putting settings language etc. Shut down and flash only oreo AP file-> done
Its reset your phone...

CSC Oreo will get error of pit file wrong. BL Oreo will get error of Bootloader wrong. CP Oreo will get error of modem wrong. AP Oreo only contain upgrade files, this file is the correct to upgrade. Now, if you want a clean install, first flash Nougat and then flash only AP file from Russia Oreo, other ones files (BL, CP, CSC) are get error because not corresponding to device

Riicardogmz said:
CSC Oreo will get error of pit file wrong. BL Oreo will get error of Bootloader wrong. CP Oreo will get error of modem wrong. AP Oreo only contain upgrade files, this file is the correct to upgrade. Now, if you want a clean install, first flash Nougat and then flash only AP file from Russia Oreo, other ones files (BL, CP, CSC) are get error because not corresponding to device
Click to expand...
Click to collapse
Any possibility to keep data or restore from a TWRP backup?
Or can i directly flash AP file on nougat without loosing data?
EDIT:I was in nougat and i just flashed AP from Oreo directly,worked fine but did not keep my data,resetted the phone.
tried to flash recovery and failed.
EDIT2:suceeded with this https://forum.xda-developers.com/samsung-a-series-2017/development/recovery-a3-2017-t3758969
got root also flashing latest superuser zip:good:

So pop-up Window not working ?

Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen

doenen said:
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
Click to expand...
Click to collapse
Yes it's trip your Knox...I think. I flashed Russia version, but I was rooted already.

doenen said:
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
Click to expand...
Click to collapse
Flashing an official stock ROM (with Odin) should never trip Knox. At least it never happened to me with other Samsung phones (Galaxy Ace, Galaxy S3 Mini, Galaxy Alpha). I haven't tried with this one, but I bet it will be safe.

[A320FL] install the correct modem?

Sorry for the title is an A320Y
good, I have a problem update to binary 5 by mistake, before I was in binary 1
the phone does not raise a signal, a modem problem
I have a backup in twrp of the old modem, but from what I understand for it to work I have to also install the boot but this being in binary 5 is impossible for me.
in gsmarena there are 10 fimwares in binary 5 for A320y
What do you recommend me to do to reset the modem?
I tried 3 and none lifted it
from already greetings to all

martin94larry said:
Sorry for the title is an A320Y
good, I have a problem update to binary 5 by mistake, before I was in binary 1
the phone does not raise a signal, a modem problem
I have a backup in twrp of the old modem, but from what I understand for it to work I have to also install the boot but this being in binary 5 is impossible for me.
in gsmarena there are 10 fimwares in binary 5 for A320y
What do you recommend me to do to reset the modem?
I tried 3 and none lifted it
from already greetings to all
Click to expand...
Click to collapse
Try doing a full flash with the newest firmware.

SnowFuhrer said:
Try doing a full flash with the newest firmware.
Click to expand...
Click to collapse
I tried with all these versions
A320YDXS5CSG1_A320YTCE5CSG1_TCE
A320YDXS5CSG3_A320YUUB5CSG2_COO
A320YDXS5CSG1_A320YUWT5CSG1_EBE
A320YDXS5CSG1_A320YUWE5CSG1_UNE
A320YDXS5CSG1_A320YUWE5CSG1_IUS
A320YDXS5CSG1_A320YUUB5CSG1_MXO
A320YDXS5CSG1_A320YUUB5CSG1_EON
A320YDXS5CSG1_A320YUUB5CSG1_BVO
the original was a320ydxu1bql1
I only get emergency calls
I can see my imei and baseband A320YTCE5CSG1 but it is the only one in binary 5

martin94larry said:
I tried with all these versions
A320YDXS5CSG1_A320YTCE5CSG1_TCE
A320YDXS5CSG3_A320YUUB5CSG2_COO
A320YDXS5CSG1_A320YUWT5CSG1_EBE
A320YDXS5CSG1_A320YUWE5CSG1_UNE
A320YDXS5CSG1_A320YUWE5CSG1_IUS
A320YDXS5CSG1_A320YUUB5CSG1_MXO
A320YDXS5CSG1_A320YUUB5CSG1_EON
A320YDXS5CSG1_A320YUUB5CSG1_BVO
the original was a320ydxu1bql1
I only get emergency calls
I can see my imei and baseband A320YTCE5CSG1 but it is the only one in binary 5
Click to expand...
Click to collapse
What's your original country/carrier csc code?
Flashed full firmware, BL, AP, CP, CSC?

tys0n said:
What's your original country/carrier csc code?
Flashed full firmware, BL, AP, CP, CSC?
Click to expand...
Click to collapse
vietnam, the last was binary 3

SM-A720F (A7 2017) Flashing INS firmware over XSG - Odin Error

I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?

Combination file successfully flashed. But, still not able to flash another country File. Can I proceed with original country file (i.e XSG stock firmware) ?
Please help me

MajjuBhai said:
I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?
Click to expand...
Click to collapse
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.

SnowFuhrer said:
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.
Click to expand...
Click to collapse
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...

MajjuBhai said:
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...
Click to expand...
Click to collapse
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.

SnowFuhrer said:
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.
Click to expand...
Click to collapse
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)

MajjuBhai said:
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)
Click to expand...
Click to collapse
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.

SnowFuhrer said:
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.
Click to expand...
Click to collapse
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:

MajjuBhai said:
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:
Click to expand...
Click to collapse
It should work to change csc with Hades and then flash stock. Just make sure you don't reflash csc then because it could change.

Can I switch from At&T 975u (3CT9) to XAA 3CTD3

I have been having issues to put on XAA (975U1) on my AT&T 975U but each time I try it, it says Fail. What am I doing wrong? Do I need USERDATA to make the switch? Which version ODIN should I use? My baseband is 3CT9. I would really appreciate the help.

There is something wrong with the XAA code. Stay with the CTC9 until next update. In my case I managed to install XAA CTD3, but now phone says it can not do any OTD updates ( first time in a XAA I see it) . I tried to flash TMobile CTC9 and flashing fails (using Home_CSC). I did not try a full wipe. I hope next rev will have this resolved. I think the BL on CTD3 is higher rev and won't allow going back.. but I'm not sure.

Usually when going between U and U1 you need to do a full wipe
Sent from my SM-N770F using Tapatalk

JapAnEEzE said:
I have been having issues to put on XAA (975U1) on my AT&T 975U but each time I try it, it says Fail. What am I doing wrong? Do I need USERDATA to make the switch? Which version ODIN should I use? My baseband is 3CT9. I would really appreciate the help.
Click to expand...
Click to collapse
N975U1 model and XAR country code. Use these in SAMFIRM. Download extract and flash with Odin latest modded version. file will be 7 gigs. No need to be unlocked is oem firmware with latest may security patch and multi support

Don't they need the USERDATA to do a complete switch?

JapAnEEzE said:
Don't they need the USERDATA to do a complete switch?
Click to expand...
Click to collapse
Only if you're going from one carrier to the next and you want the bloatware.

I don't want the bloatware. I want to remove it. So I can use XAR which is better?

I really need help to flash CTD3 ( to my 975U (CTC9). I would like the steps if that is ok to ask.

Not being a jerk, but there are soooo many post on how to do this. But I will tell you so you dont have to look it up. Find the correct firmware in Sammobile or Frija. Load firmware..load correct version of odin. Extract firmware leaving you with AP..BL..CP..CSC..and sometimes HOME_CSC
I always do a factory wipe because I like a clean install. Open odin, put device in download mode. Make sure its recognized by odin. Place AP in AP spot in odin..BL in BL spot..CP in CP spot. Using CSC will wipe device. If you want to save data use home_csc. Once everything is as it should be click start. Wait for PASS top left of Odin..it will be Green
Sent from my SM-N960U using Tapatalk

How to change CSC back to original if you are not able to

So i have a S20Fe exynos and me being impatient installed oneui4 SER version on device thinking that will see whatever happens. I am also developer of Clean OS rom for s20fe so i tried using my csc feature script and it worked flawlessly in SER csc but I thought of coming back to oneui3 so I installed it back using my default INR regiom firmware of November although it installed fine in ODIN when i tried to install my csc feature it showed my csc is SER and didnt installed. My fear of csc getting stuck got true i tried refreshing again but SER came. Then i remembered what I used to do in S3 days to fully clean install firmware in my device and thought of doing so
Steps for the process are
Open csc files of your firmware and extract the .pit file from it
Open odin and load all your respective files in the slots
Go to pit option tab and select the .pit file you extracted
Now go to options and unselct auto reboot and select nand erase
Start the flashing process.
This process fully wipe your nand of your device
After this I got my default csc back to inr and all my functions are working properly including my csc features.
This method was personally test by me but i cant give guarantee that i will 100 % work for you but what is the harm in tryinf it out.

I have g7810(chinese verison) of S20FE 5g.I want to change the csc..If i change it to other region will i be able to lock my bootloader with that and get regular update just as normal?

madadictromtester said:
So i have a S20Fe exynos and me being impatient installed oneui4 SER version on device thinking that will see whatever happens. I am also developer of Clean OS rom for s20fe so i tried using my csc feature script and it worked flawlessly in SER csc but I thought of coming back to oneui3 so I installed it back using my default INR regiom firmware of November although it installed fine in ODIN when i tried to install my csc feature it showed my csc is SER and didnt installed. My fear of csc getting stuck got true i tried refreshing again but SER came. Then i remembered what I used to do in S3 days to fully clean install firmware in my device and thought of doing so
Steps for the process are
Open csc files of your firmware and extract the .pit file from it
Open odin and load all your respective files in the slots
Go to pit option tab and select the .pit file you extracted
Now go to options and unselct auto reboot and select nand erase
Start the flashing process.
This process fully wipe your nand of your device
After this I got my default csc back to inr and all my functions are working properly including my csc features.
This method was personally test by me but i cant give guarantee that i will 100 % work for you but what is the harm in tryinf it out.
Click to expand...
Click to collapse
do I still have to flash the rest of the files?

S20fe.hype said:
do I still have to flash the rest of the files?
Click to expand...
Click to collapse
Yeah you have to flash ap.bl cp and csc like normal

madadictromtester said:
Yeah you have to flash ap.bl cp and csc like normal
Click to expand...
Click to collapse
I cant find pit file in csc
Where can i find it?

S20fe.hype said:
I cant find pit file in csc
Where can i find it?
Click to expand...
Click to collapse
It is .pit file in csc zip

madadictromtester said:
It is .pit file in csc zip
Click to expand...
Click to collapse
I flashed it with repartition activated
Nand erease auto reboot not selected
And still not repair csc
I miss a step?

S20fe.hype said:
I flashed it with repartition activated
Nand erease auto reboot not selected
And still not repair csc
I miss a step?
Click to expand...
Click to collapse
No not really although this step worked for me but i dont really know of it will work for others

But how to change CSC to default, as if I hadn't changed him before, but without wiping data, pls i very need