Related
Sorry if i posted to wrong place but i cant find any forum for a50s
i saw a50 have root now but cant see any root method for a50s
is it because this phone just release and doesnt have root yet?
It may be very similar or maybe even exactly the same to the way we on the A50 gain root access, however, you've just gotta wait for someone to take that first step. I mean you could try but if I were you I'd wait for someone else to try first.
AjayL13601 said:
It may be very similar or maybe even exactly the same to the way we on the A50 gain root access, however, you've just gotta wait for someone to take that first step. I mean you could try but if I were you I'd wait for someone else to try first.
Click to expand...
Click to collapse
Thanks for reply
i guess i will wait then
redymedan said:
-----------------------------------------------------------
Complete Guide for Rooting Samsung Galaxy A50 using Magisk ( tested on SM-A505F ), you need Latest Magisk Manager and Stock ROM :
* Download the firmware Galaxy A50 (SM-A505F).
* Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.3.2.apk to your phone.
* Install Magisk Manager ( MagiskManager-v7.3.2.apk ) on your phone.
* In Magisk Manager: Install → Install → Select and Patch a File
* Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
* Enter Download Mode : Turn Power Off. Press and hold Volume Up key + Power Key,* When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset, Select Reboot to bootloader.* Connect your Samsung Galaxy to PC using USB Cable.
*Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do. Important: Uncheck “Auto Reboot” in Options!
* Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
* Reboot to the stock recovery to factory reset the device.
* Full data wipe is mandatory! Do not skip this step. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key in the Android Logo screen with text "Erasing", when screen blank again Press and Hold Volume Up + Power key.* When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset. Select Reboot system now.
* After the device is booted up, do the usual initial setup. It need more time and patient. After finished,* You will see Magisk Manager app in app drawer.* If not, Install it manually.
* Connect the phone to Internet, open Magisk Manager.* Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
* Done! You can use Root Checker to check it, Enjoy!
Watch this video https://youtu.be/vYcevuJKBac
It look like not easy for pressing key combination, so you need read and watch.
Finally I can root my galaxy A50 after 2 months later.
Solved: Lost Magisk Root After Reboot
To prevent loosing magisk root after reboot. Reboot the phone from Magisk or Fully Power Off, you can watch this video https://youtu.be/Ea8s16usBOM
Click to expand...
Click to collapse
Try this with your firmware, unlock bootloader its need
Darkcannibal said:
Try this with your firmware, unlock bootloader its need
Click to expand...
Click to collapse
i will try and can my a50s use any version of twrp? just to backup my app and data because i see the guide said need to wipe data
also if i fail , does flash stockrom can prevent bootloop ?
Before try to root it, make sure the firmware in your hand. I have A50s SM-A507FN and looking for the firmware
outof_galaxy said:
Sorry if i posted to wrong place but i cant find any forum for a50s
i saw a50 have root now but cant see any root method for a50s
is it because this phone just release and doesnt have root yet?
Click to expand...
Click to collapse
Visit this Thread I just create it for rooting Galaxy A50s:
https://forum.xda-developers.com/galaxy-a50/how-to/guide-root-samsung-galaxy-a50s-tested-t3972859
Is there someone who use sm-a505f with root?
Sent from my [device_name] using XDA-Developers Legacy app
outof_galaxy said:
Sorry if i posted to wrong place but i cant find any forum for a50s
i saw a50 have root now but cant see any root method for a50s
is it because this phone just release and doesnt have root yet?
Click to expand...
Click to collapse
Yes there's an option to root that device. I am a Samsung a50s user myself. This device was rooted for almost a year now. Let me know if you are still decided to gain root access on that device so I can send you apps needed, will walk you thru the whole process. Attached is a screenshot of my A50s installed with Custom ROM ( Havoc OS android 11)
Hello everyone,
After my first attempt to root my RN8P and a hard brick (after installing TWRP) I would obviously like to avoid a second disaster.
Let me give you a bit of an overview first though:
MIUI version: Global 11.0.6.0 (PGGMIXM)
Android version: 9 PPR1.180610.011
Security Patch Level: 2019-12-01
Bootloader: Unlocked
I am not a complete noob as I have already rooted and flashed CFWs on 2 Xiaomi phones (Redmi 3 and Redmi Note 4x) without any problems but I have to admit that I do not really understand all the details so consider me a "copy and paste" user which is why I post this here. After having the hard brick experience and dishing out 30 USD for my stupidity to have someone flash a stock ROM again I would like to make sure that I am NOT following a guide which will lead me down the same alley again.
Goal: Plan is to install TWRP and Magisk (want to continue using banking on my device) and flash the Lineage ROM. I also use Macrodroid to automate a lot of things hence the need for root.
Is there anyone here who could point me to the correct procedures for my ROM version/setup to help me succeed on my 2nd try?
I would love to learn all of this in detail before I attempt it again but unfortunately I am a busy dad with 2 young kids and simply don't have the time to really do
All help is much appreciated!
Cheers!
How to flash TWRP (LR.TEAM) and root RN8pro:
1. Download recovery file from this message
2. Open CMD from the dir where you store twrp.img (it's important because you don't need to type whole path of the twrp.img
3. Turn off the device, hold Power button & Vol- to enter fast boot and connect device to USB
4. In CMD type first fastboot devices to ensure that device is in fastboot, this is not important but recommended. Output should be something like this 4l6lsctgskpj4swc fastboot
5. Then it's time to flash recovery file. Type fastboot flash recovery twrp.img
6. This is the most important step now, on the device screen it should write USB Transmission ok if that is there you are ready to go. Remove device from the USB and hold Power button & Vol+, When the device turn off the screen keep holding Vol+ it'll keep screen off for about 5-10 seconds, then it'll show a recovery, still holding vol+ because it will get restarted again, and again still holding vol+ and recovery will show up. Simple words (Keep holding vol+ till recovery not appear for second time)
7. If it asks for a password, it's a password you use on the device it self(one for unlocking the screen or unlock the device after reboot), enter password and wait for Data decrypt.
At the moment there is no root and recovery will be replaced after you try to boot next time. To prevent it from replacing recovery do next (my opinion is skipping step 8. and 9. and having stock recovery because of MIUI updates):
8. Go to mount and tick the /system
9. Go back, tap on advanced, then to File Manager search for system_root dir open it, then find system and on the bottom is file called recovery-from-boot.p Remove that file and recovery wont be replaced
Now how we root it:
10. Go to advanced and tap on Close AVB2.0 and swipe to confirm
11. Go back and tap to Install ROOT, swipe to install and Reboot system
This will install Magisk v19.4, after boot you can update it from the Magisk Manager, my suggestion is to first update the manager then Magisk binary.
I have done this on ROM: MIUI Global 11.0.2 and 11.0.3 | Stable 11.0.2.0(PGGEUXM), Android 9 PPR1.180610.011
Guide by: @Paget96
Credit : Telegram group
AD FOX said:
How to flash TWRP (LR.TEAM) and root RN8pro:
1. Download recovery file from this message
2. Open CMD from the dir where you store twrp.img (it's important because you don't need to type whole path of the twrp.img
3. Turn off the device, hold Power button & Vol- to enter fast boot and connect device to USB
4. In CMD type first fastboot devices to ensure that device is in fastboot, this is not important but recommended. Output should be something like this 4l6lsctgskpj4swc fastboot
5. Then it's time to flash recovery file. Type fastboot flash recovery twrp.img
6. This is the most important step now, on the device screen it should write USB Transmission ok if that is there you are ready to go. Remove device from the USB and hold Power button & Vol+, When the device turn off the screen keep holding Vol+ it'll keep screen off for about 5-10 seconds, then it'll show a recovery, still holding vol+ because it will get restarted again, and again still holding vol+ and recovery will show up. Simple words (Keep holding vol+ till recovery not appear for second time)
7. If it asks for a password, it's a password you use on the device it self(one for unlocking the screen or unlock the device after reboot), enter password and wait for Data decrypt.
At the moment there is no root and recovery will be replaced after you try to boot next time. To prevent it from replacing recovery do next (my opinion is skipping step 8. and 9. and having stock recovery because of MIUI updates):
8. Go to mount and tick the /system
9. Go back, tap on advanced, then to File Manager search for system_root dir open it, then find system and on the bottom is file called recovery-from-boot.p Remove that file and recovery wont be replaced
Now how we root it:
10. Go to advanced and tap on Close AVB2.0 and swipe to confirm
11. Go back and tap to Install ROOT, swipe to install and Reboot system
This will install Magisk v19.4, after boot you can update it from the Magisk Manager, my suggestion is to first update the manager then Magisk binary.
I have done this on ROM: MIUI Global 11.0.2 and 11.0.3 | Stable 11.0.2.0(PGGEUXM), Android 9 PPR1.180610.011
Guide by: @Paget96
Credit : Telegram group
Click to expand...
Click to collapse
Thanks a lot for your reply!! I will try this process. The only thing I was unable to find is the files you are mentioning. Can you please point me to those?
Much appreciated!
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Video Link:
Credit:
1. @ianmacd
2. @redymedan
Mohd Masab said:
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Credit:
1. [email protected]
2. Recovery-Mode
Click to expand...
Click to collapse
Keep up to making the next tutorial on Galaxy A51
Hello
Mohd Masab
It's my first Samsung .I had 4-5 Sony ,easy to root ,a Doogee S90 (NEVER BUY THAT !).
Is your method safe ,have U seen bad effects ,what fonctions did U lost ?
Bye .
Fred
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
hargitomi said:
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
Click to expand...
Click to collapse
I did what you said but still encrypts after reboot. Latest Magisk.
Hi, I am having problems with internal storage, I can not create folders and there are applications that I can not download, any solution?
Could someone tell me if it is compatible with the November update CTK1?
I have managed to root the phone, you can install everything and configure it, but after turning off the phone, I can't start it does bootloop, and it returns to the prompt "The phone is not running Smasung official software ..." never finishes starting? What do you recommend me to do?
020221
I reloaded the original rom and did the procedure again, taking into account the clarification of installing install dm_verity and Magisk after each other, without a reboot, and everything went well!
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
It worked for me but i can't access themes and other system apps
Is there any solution to access themes on rooted a51
Everything working well for me, thanks !
For ameer419 ,maybe try to flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip after EACH other thing U flash in TWRP ...
Good luck !
Hello everybody !
Bootloop til this morning ,maybe my fault :I erased system apps such as Facebook ,Youtube ...nothing very important .
I tried to start the procedure at the begining ,it doesn't work ...
Any idea from anyone ?
Thanks .
fleafred said:
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
Click to expand...
Click to collapse
How are you fleafred, https://samfrew.com/es/model/SM-A515F/ here you will find the original rom. I did the procedure again and had no more problems.
Cool ,I couldn't find it!
Just have to wait for 9h now ...
Thanks a lot ,abraxasboot ,I'll tell u.
Have a nice day .
It worked !
Ouf !Thanks a lot ...
I could re-install Magisk ,Xposed ...
I'd have like to know what I desinstalled to do that ...
Have a nice day .
Thank you very much, brother. You did the perfect way
== important ==
I was unable to flash and reboot into TWRP recovery after applying the official Samsung update from March, which updates Android from 10 to 11. Reboot into recovery would not work and I would always end in a boot loop.
I had to downgrade to Samsung's official Android 10 and used the binaries from January for that: https://samfrew.com/es/model/SM-A515F
After that, flashed TWRP again and was able to boot into recovery right away as it should be
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
hey guys i used a lyf wind 1 to flash lineage os using twrp ..... so i wiped the previous os and unknowingly flashed another unsupported version of twrp ...when entering to recovery menu its all blank .... now i have no os and recovery ...... i couldnt flash stock rom because my device is not recognised as qualcomm port .............
pls any help ????
I have a working 11R twrp and all the DRM passers mejestics etc. to run.. you can boot the os after that that is the standard Samsung OS. np u can install LINAGE os 18.1 Andys march release, the Mejestics meaning u can patch root without Needing to part the orignal Firm and copy boot.img over. etc
Here is Link With GSI as Well and 2.5 GUI Twrp working and UI3.0
Google Drive: Sign-in
antuanix46 said:
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
Click to expand...
Click to collapse
All good in the end, I needed to install samsung's firmware in odin first
Thank you for the good work
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Nice job
this will work with BTK5 fw?
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
PetiHun08 said:
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
Click to expand...
Click to collapse
UPDAAAATE. Reflashed everytrhing tried again and works on btl3+ sm-a505fn/ds eu model
shoosterjonesr said:
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Click to expand...
Click to collapse
U need to flash multidisaabler
Will this work on an A50 witn the Android 11/ OneUI 3.1 update? Because I got nothing but errors and bootloops trying to root that, while I had no problems with an Android 10 version.
IF i dont have an sd card can i sideload
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.ifpatched
Credit to mohitmallick17
Click to expand...
Click to collapse
if i have no sdcard can i sideload multidisabler?
PetiHun08 said:
IF i dont have an sd card can i sideload
if i have no sdcard can i sideload multidisabler?
Click to expand...
Click to collapse
after format data just copy multidisabler to internal storage
Ok with mtp obviously. Thank u
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Click to expand...
Click to collapse
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
PetiHun08 said:
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
Click to expand...
Click to collapse
Got back to stock rom. Plz help
PetiHun08 said:
Got back to stock rom. Plz help
Click to expand...
Click to collapse
I think boot.img isthe problem. Maybe can i fiish if i flash twrp with no magsk?(btw my phone has no ramdisk)
Still waitin
Will this work for A50s FN ?
Right now it is flashed with TWRP 3.3.0, but I want to upgrade to Android 11 and is looking for suitable TWRP upgrade. It's my main phone so I can't risk have it bootloop
Hi,I unlocked bootloader,but canot install Twrp.in odin,it always failed.Help ?
What error
PetiHun08 said:
What error
Click to expand...
Click to collapse
In odin it faild,I realise,I'm on exynis version,but cenot finde exynos version of twrp.
I have exynos a50 and mine is forking fine. Ehat error do odin gives you?
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.
kac222 said:
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.
Click to expand...
Click to collapse
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Dont forget to format data
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Here is your fix. Click link and follow instructions to access twrp on Android 11.
Post in thread 'MarvinMods Galaxy A70 Guide. Root, Los 17.1/18.1, Magisk, Stock O.S. Android 10.' https://forum.xda-developers.com/t/...sk-stock-o-s-android-10.4100655/post-84754781
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great
JakunTech1010 said:
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great
Click to expand...
Click to collapse
So now you don't need to put the USB cable to start twrp?