Related
Just going to dump all the info I've found about this device into this thread. All the threads pertaining to this thread are in Russian and I can't read Russian, so this might be helpful to any English speaking owners of this tablet.
Special thanks to Telegram user @SSDD_1744 (don't know your XDA/Reddit user, I'm sorry) for basically spoonfeeding me all these instructions!
WARNING: If you need to flash to stock for whatever reason, be sure to download a image file specific to your country. If you don't, you'll hard brick your device that can only be fixed QPST (supposedly).
Rooting:
(Tested on 5.0.2)
Install KingRoot. Let it root your device.
Install Super-SU Me, to get rid of the bloatware that comes with KingRoot.
Installing Xposed:
I used Flashify to flash TWRP. Be sure to flash the right version though (2.8.7.7 v2) or else you won't be able to mount cache.
Then download Xposed (version sdk21 ARM) and flash it.
WARNING: Flash v1 of the modded TWRP and you won't be able install any apps after flashing Xposed.
Unbricking:
Still working on it. Downloaded QPST but have not been able to get QPST 2.7 to read the tablet.
Links:
Discussion:
https://translate.googleusercontent...690491&usg=ALkJrhiWSlkbZ-tUofZx68NPSGIv8pjIPA
Root:
https://translate.googleusercontent...JrhhQszcRvUo8HILThvz57JmsLj4L9g#entry44556703
https://translate.googleusercontent...JrhiCt__6apcRhk-gtcBExYJCnC9nGQ#entry41676452
Instructions for obtaining the rights to Ruth phones / tablets.
Tested on Android 4.4+
perhaps this algorithm works on Android 5+, I have no way to verify
All transactions with their phones / tablets are performing at your own risk !!!
To get started, read this post from start to finish and only then proceed to action!
Introduction
This instruction is written based on my own experience obtaining root on their plates, and then on the Xperia M2, bought plemyashki. For instructions attached versions of applications that were relevant at the time, the new version can download the relevant topics on the forum, there will find all information on how to work with the proposed programs and algorithms for their actions (links to topics added).
For all the action with your phone / tablet you are responsible for yourself!
Download all the necessary tools to obtain Root (of instructions / topics on the forum), obespechte for phone / tablet access to the Internet (Wi-F / mobile data) and let the phone settings / tablet installation from unknown sources.
Needed Downloads
KingRoot_V4.5.0B202.apk (6.76 MB)
Me_5.9.apk-SuperSU (9.07 MB)
V2.49 Beta.apk SuperSU (5.63 MB)
eu.chainfire.supersu.pro.205.apk (52,88 KB)
Next in series:
1. Install KingRoot .
Get Ruth's right, in the device may reboot.
2. Set SuperSU-Me, .
Run the grantor, the program deletes KingRoot and Chinese KingUser with replacement SuperSu.
Remove the longer SuperSu-Me the desired program.
3. Obnovyaem SuperSu to the latest version. Then set PRO-key .
Installing Pro-key Optionally !!! Use Cases SuperSu without installing key .
4. Open SuperSu and on-demand update binary SU normal way. After a successful update, confirm the request to restart.
5. To make sure that everything is done correctly, check the correct installation and operation of Ruth (mount the system partition on the record), I used the Root Checker Pro and Root Explorer , respectively.
The output is a complete rut without kitayschiny with SuperSu Pro. We use and enjoy
Click to expand...
Click to collapse
Unlocking bootloader (haven't tried this):
https://translate.googleusercontent...Jrhh6g4wI-8Hb_LzAcPnIUxYvWNzZ0A#entry46711087
Stock firmware:
https://translate.googleusercontent...?s=&showtopic=703414&view=findpost&p=45272695
Damn, development has really boomed on this little tablet! Finally got it back after a few months (I sent it into Asus to repair it for me).
Stock ROM:
https://www.asus.com/ru/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (I can't get the English version to load, delete the /ru/ and you'll be redirected to the English site)
https://www.asus.com.cn/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (Chinese site)
==== REMEMBER TO DOWNLOAD THE CORRECT COUNTRY OR YOU'LL BE BRICKED) ====
https://yadi.sk/d/b1NMLXHBsNV8C (latest software for the worldwide model)
[http://4pda.ru/forum/index.php?showtopic=703414&st=320#entry50270292]
http://4pda.ru/forum/index.php?showtopic=703414&st=200#entry49389176 (Asus Flash Tool and stock ROM v4.8.2 WW [WorldWide])
Unlocking bootloader:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48200665 (use fastboot oem device-info to check if it's unlocked)
Root:
http://4pda.ru/forum/index.php?showtopic=690491&st=580#entry44778545 (KingRoot - you'll need a 4PDA.ru account to download this)
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (last section of the post)
CM13:
http://get.cm/?device=P024&type=nightly
https://vasy.ru/CM13/
http://forum.xda-developers.com/android/help/asus-zenpad-8-z380kl-custom-rom-t3370277
http://forum.xda-developers.com/android/development/kernel-asus-z380kl-p024-kcal2-t3405595 (Kernel)
Recovery:
https://vasy.ru/TWRP/P024/
http://4pda.ru/forum/index.php?showtopic=690491&st=1220#entry48094504 (TWRP 2.8.7.0)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051
Guides:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (this has a lot of instructions: root, recovery, boot partition restore, adb drivers etc.)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051 (this has a bunch of files, Resurrection Remix [I haven't tested it yet tho], and instructions on getting out a bootloop)
http://4pda.ru/forum/index.php?showtopic=690491&st=1640#entry49724823 (flashing stock software)
If you want to open the engineering menu, type " * # * # 4636 # * # * "
To boot into fastboot, restart/turn on the device and hold volume up. It'll pop you into a menu with three options.
To boot into recovery, from the fastboot screen (three options), use the volume buttons and navigate to the second option "factory reset" and hit power to confirm. It'll boot into recovery.
=====================================================================================
Recommended way to flash ROMs:
1) Download TWRP. Use adb to boot (NOT flash) into TWRP. Flash ROM there.
2) use KingRoot to root. Use Flashify to flash the ROM.
======================================================================================
If you want to go look up some more info or guides, go here:
http://4pda.ru/forum/index.php?act=...=rel&subforums=0&query=z380kl&forums=570&st=0
and use GTranslate to translate the page. The first page is the earliest posts with the keyword, the last page are the latest post.
please add these ROM's for this Device:
Ressurection Remix:
https://www.androidfilehost.com/?w=files&flid=121811
AICP 12.1:
https://www.androidfilehost.com/?w=files&flid=136181
The latest Official ROM P024 model:
http://dlcdnet.asus.com/pub/ASUS/Ee...ser.zip?_ga=1.109506565.1670552787.1483182775
ZenPad 8 Z380KL Firmware: V5.9.0.0 (WW SKU version only)
Improved Item:
1. Update Google security patch
2. Support unlock tool
9008 brick info:
https://4pda.ru/forum/index.php?showtopic=643084
Pertaining to p024:
https://4pda.ru/forum/index.php?showtopic=643084&st=5740
https://4pda.ru/forum/index.php?showtopic=643084&st=3660 (page 179 - 180, 183 - 185 discusses the files needed to unbrick and how you would - CTRL + F Russ and read the people who quote him)
How I bricked: https://4pda.ru/forum/index.php?showtopic=703414&st=180#entry49329798
https://4pda.ru/forum/index.php?showtopic=690491&st=1420#entry48527044 (unbricking files - dead link though)
https://4pda.ru/forum/index.php?showtopic=703414&st=140 (discussing how to fix using the images from the dump)
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
ROMs
LineageOS: https://download.lineageos.org/P024
AICP: https://saki-sss.blogspot.com.by/2016/12/z380k-aicp-121.html
Resurrection Remix: https://androidfilehost.com/?w=files&flid=121811
(made by https://androidfilehost.com/?w=profile&uid=457095661767100043, found from http://andmem.blogspot.jp/2016/05/asus-zenpad-8-z380kl-root-rom.html#chapter-19) - abandoned?
seities said:
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Click to expand...
Click to collapse
probably not. I think it's only compatible with the SD 410.
xDark_ said:
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
Click to expand...
Click to collapse
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
jutphaas said:
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
Click to expand...
Click to collapse
I don't think unlocking the BL is necessary for flashing LOS. But yes, that's how I get into TWRP as well.
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
Can you still access fastboot, then at least you can flash twrp as described before in this thread and install from twrp lineageos p024 (lineage-14.1-20180105-nightly-P024-signed.zip) and Open gapps to get google playstore etc , select Arm, (not 64) then version 7.1, then Pico would work.
If you have twrp, you at least can still use your asus... I have found no way to flash original stock... stock must not be flashed from twrp.
Since you mention twrp already used, you can try: turn your device off, then press volume up then the bootloader menu comes, select 2: reset to enter twrp(where it says reset. if you had flashed twrp, that is how you can get into twrp) from there, install lineage os and gapps from micro sd card
My rom is MMB29M.WW_P024-V5.9.4-20170613
xDark_ said:
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
Click to expand...
Click to collapse
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
jutphaas said:
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
Click to expand...
Click to collapse
Yes it was. I flashed 15.2 on both stock and LOS. I've heard of some issues with 15.x so you can try .2 or 14.x.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
What error was given? What do you see when you connect it to a computer? What does "tablet locked" mean? Would help if you gave some pictures too.
I'm currently in the process of getting the RAW files/service ROMs for AFT but I don't have an ETA on when I'll be able to get that.
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
pucci2 said:
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
Click to expand...
Click to collapse
Does it respons to adb devices of fastboot devices in this stage?
no, it is not recognized
Hello hello,
this will be my "live" thread of bringing AICP 13.1 to my xperia z1c, I found some Guide's that I will follow and I will share with you all the links and knowledge I gained as a newbie that I used to understand and fix my problems on the way.
Maybe this will help you, too.
Main Tutorial: LINK
Target of all this: LINK
My Device:
Sony XPERIA Z1C, 14.6.A.1.236 , Lollipop 5.1.1
My best hint: read carefully, take your time to understand what you're trying to do and do your own research!
Hopefully you will get a aicp custom rom out of it.
_____________________________________________
_____________________________________________
General information: Android 5.1.1 cannot be rooted due to its high security standards, therefore we will downgrade to a lower security stock rom and create root access there. Root access will be needed as well as an unlocked bootloader to install real recovery (TWRP) which is the tool to flash custom roms like aicp. But the aicp custom rom will not have a good working camera, don't ask me why, but the camera seems to be a really difficult thing from the point of developer's view, let's accept this. Aside of that disadvantage, this custom rom is a very nice software and it makes my z1c kind of new. I don't use my camera anyway often at all.
During all this flashing thing I had a very big ??? while implementing real recovery. I was able to flash the .236.ftf but not the openbootloader.ftf as described in section 5 in the main tutorial. The result was twrp boot failed.
Error description:
flash .236.ftf works
flash openbootloader fails
flash twrp works
boot twrp fails
boot stock rom works
My solution:
I restarted from scratch and finally with the kind of messed up secquenceI got it:
flash .236.ftf works
flash openbootloader fails
flash twrp works
boot twrp fails
flash openbootloader works
flash twrp works
boot twrp works
UPDATE 06.12.2018 as a solution for REAL RECOVERY with working camera <<< RECOMMENDED
0. boot into rom works
1. flash openbootloader works
2. boot into rom works
3. flash .236.ftf works
4. boot into rom & check camera works
3. flash twrp ( business as usal ) works
4. boot twrp ( First boot is damn important, don't miss it! Press Vol- & Power, wait for vibration, release Power & keep Vol- until twrp boots up ) works
5. full wipe, flash aicp-rom, flash gapps, flash magisk-root, boot system works
6. enjoy Oreo 8.1 & camera check !!! works !!!
This routine worked straight forward for me where I started from scratch with my second device.
Flashing aicp was pretty easy, good to know for flashing the rom was full wipe = advanced wipe and select everything except of micro sd
To complete my aicp 13.1 Oreo 8.1 device the camera problem has to be fixed ( Saving the taken picture fails, display goes into freeze, no chance to solve this with camera mods, camera apps )
But @lm089 gave me the right hint, and finally this was my solution! Thanks again @lm089!!
Have fun with your new >> SONY XPERIA Z1 COMPACT <<
How to update TWRP
1. Turn Off your device
2. Start device in fastboot mode by connecting via usb cable to your pc and press Vol- until blue led tuns on
3. use fastboot flash recovery twrp.img to flash it
4. boot twrp ( This first boot is damn important, don't miss it! Press Vol- & Power, wait for vibration, release Power & keep Vol- until twrp boots up ) works
How to update to aicp 14.0 pie 9.0
starting with the running and latest aicp 13.1 oreo 8.1 rom above I just followed the Instructions here. As a specialty I had to install the Magisk Manager App manually into the rom to get root. Downloading supersu.apk from www.supersuroot.org works fine as well.
Your fastboot connection doesnt work for some reason though u had this workin fine in the past? maybe u had a windows update. install your drivers again.
>> LETS KEEP THIS DEVICE ALIVE <<
_____________________________________________
_____________________________________________
More helpful links that I used:
Debug apps by creating logs
what is adb? an xda tutorial
ADB working Download Link and ADB Article on xda
xda flashtool error during setup: click
[NOOBIE] Basic adb commands and device partition overview
Latest TWRP 3.2.3-0 for z1c
root solution using flash tool
Restore DRM functionality after UB
If TA Backup dry restoration restoration fails: Solution and Download *.dll
Boot into recovery or fastboot mode
How to install TWRP
Magisk beats superSU
How to Install Custom ROM using TWRP for Android!
change boot animations
[TUTORIAL] Design Your Own Bootanimation
Backup & Restore Your ROM With TWRP
Terminology: odex and deodex
If the camera goes into freeze or saving the picture fails: This was my solution! /// But you better go straight with the steps of my update 06.12.2018, field tested!
THANKS A LOT TO @colaigor for his [BEGINNERS GUIDE]
Ok. So i dont have much time now but i can give some short directions.
1. Get unlock codes from sony for bootloader unlock
2. Instal adb and fastboot at your system(PC)
3. Instal z1c drivers
4. Instal flashtool
5. Unlock bootloader,root,flash recovery(search forum for "real recovery" ),flash root solution
6. Flash wanted rom,gaps
P.P. On second thought u dont need flashtool. All can be done with adb and fastboot commands from terminal
There is one thing I don't understand:
what is the difference between FLASHING REAL RECOVERY and FLASHING FAKE RECOVERY?
What I read is, that in both cases I get TWRP but on different partitions (real = Recovery Partition, fake = Boot partition) but do I need both or do I choose just on of them?
derjango said:
There is one thing I don't understand:
what is the difference between FLASHING REAL RECOVERY and FLASHING FAKE RECOVERY?
What I read is, that in both cases I get TWRP but on different partitions (real = Recovery Partition, fake = Boot partition) but do I need both or do I choose just on of them?
Click to expand...
Click to collapse
Real recovery have its own partition(after that update to bootloader). Custom recovery dont have that and its stored somewhere else(FOTA,onetime boot image , etc). Choose real recovery. New stuff works good with it.
Ok thank you :good:
flashtool log of openbootloader.ftf failed:
01/015/2018 13:15:58 - INFO - Device connected in flash mode
01/017/2018 13:17:19 - INFO - Selected Bundle for Sony Xperia Z1 Compact(D5503). FW release : 1. Customization : openbootloader
01/017/2018 13:17:19 - INFO - Preparing files for flashing
01/017/2018 13:17:19 - INFO - Please connect your device into flashmode.
01/017/2018 13:17:19 - INFO - Using Gordon gate drivers version 3.1.0.0
01/017/2018 13:17:20 - INFO - Opening device for R/W
01/017/2018 13:17:20 - INFO - Device ready for R/W.
01/017/2018 13:17:20 - INFO - Reading device information
Click to expand...
Click to collapse
solved, I skipped step 5.2, flashing the .236.ftf in advance
but how can I start TWRP?
doesnt work with POWER + Vol-, vibrate & release power
I tried to flash the following recovery solution using this command:
smartphone in fastboot mode (blue LED enabled)
fastboot flash recovery recovery.img
TWRP from step 5.1 of the GUIDE
TWRP 3.0.2
My formerly flashed .236.ftf rom works fine, but I cant start TWRP the device goes directly to my rom
zlata said:
Real recovery have its own partition(after that update to bootloader). Custom recovery dont have that and its stored somewhere else(FOTA,onetime boot image , etc). Choose real recovery. New stuff works good with it.
Click to expand...
Click to collapse
Thats where I'm stuck right now, any ideas how to fix?
okay got it, basically i do not know what the problem is but:
after BLU
flash .236 :good:
flash openbootloader
flash twrp :good:
--> failed to install openbootloader and probably thus twrp failed
solution: I skipped to flash .236 as recommended by the author of the GUIDE (step 5.2)
flash open bootloader :good:
flash twrp :good:
--> failed to start twrp, though it was installed successfully
flash .236 :good:
flash openbootloader (failed again, but it's already on the device and I guess I could have skipped this here)
flash twrp :good:
first boot of twrp is successful :good:
And basically the author explained it in his text, FIRST INSTALL OPEN BOOTLOADER BEFORE WRITING STH TO RECOVERY PARTITION
I think you should use Aicp 14 pie instead of 13.1 Oreo
I feel Aicp 14 PIE is very stable and flash port camera stock this link https://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-stock-camera-nougat-roms- t3628791
Nice thread, thank you! Wish I had that when I started rooting and flashing
@lm089 Haha it's quite some work to get into it, right? I just saw that we are running on the same device & custom rom, how did you solve the issue with the not working camera? I'm still reading stuff about some mod, but I'm curious and open for tested solutions on z1c
best, dj
derjango said:
how did you solve the issue with the not working camera? I'm still reading stuff about some mod, but I'm curious and open for tested solutions on z1c
best, dj
Click to expand...
Click to collapse
Had this situation twice with 2 different oreo ROMs. Both times I solved it following a rather strange sounding suggestion I found on the AICP 13.1 discussion thread. The basic idea is to go back to a stock Sony ROM. Boot into it and make sure the camera is working which for me was the case both times. Then - if necessary - re-root your phone (on first occasion I flashed a pre-rooted .236 version but that caused some extra trouble so next time I decided to flash an unrooted version). And from then on it's the standard way as you described it in your OP.
Good luck!
Okay, thanks a lot for your hint! Unfortunately the camera mod didn't fix the problem, my android-task for this evening is defined:
AICP 13.1 Oreo 8.1 on z1c, root, ulb, magisk 17.1
1. backup my system (done)
2.0 flash stock rom lollipop 5.1.1 (14.6.A.1.236.ftf) with flashtool via usb (done),booting the os for the first time takes quite long (~10m), check camera in the os (done)
interesting fact: recovery is deleted by flashing the rom via flashtool - I thought I can go the lazy way and skip the step of installing twrp again into recovery
2.1 okay, let's do it: install twrp (done) and boot into twrp, NOT into ROM!! (done) (Vol- & Power, wait for vibration & release Power but keep Vol- until TWRP starts up)
3. flash aicp 13.1 following this (full wipe as an advanced wipe: select all EXCLUDING THE SD STORAGE)
Again here, I recognized the first boot of the rom takes quite longer.
4. check camera (done)
!!!! IT WORKS !!!!
(I did it two times)
alright, lets start flashing my second device - now I know how to do it
Thanks guys!!
derjango said:
!!!! IT WORKS !!!![/SIZE]
Click to expand...
Click to collapse
Weird, isn't it?
lm089 said:
Weird, isn't it?
Click to expand...
Click to collapse
Totally But hey, it's a solution
btw @lm089, boots your ota-updater directly into twrp and start the flashing procedure? In my case I had to boot twrp manually and flash the zip manually, too
derjango said:
btw @lm089, boots your ota-updater directly into twrp and start the flashing procedure? In my case I had to boot twrp manually and flash the zip manually, too
Click to expand...
Click to collapse
No, updater is booting into recovery, doing a nandroid backup and wiping caches (because I told it to), then flashing and finally rebooting into system. All by itself :good:
I remember having trouble with that in the past though. Do you by any chance have an SD card formatted as adoptable storage?
lm089 said:
No, updater is booting into recovery, doing a nandroid backup and wiping caches (because I told it to), then flashing and finally rebooting into system. All by itself :good:
I remember having trouble with that in the past though. Do you by any chance have an SD card formatted as adoptable storage?
Click to expand...
Click to collapse
Yes, its used as an external storage
derjango said:
Yes, its used as an external storage
Click to expand...
Click to collapse
ok, that's something different; adoptable storage means that your SD or part of it is setup to extend internal storage. If you can access all of your SD from TWRP then it is indeed formatted a external storage.
1) How to unlock bootloader:
https://developer.sony.com/develop/...ed/unlock-bootloader/how-to-unlock-bootloader
2) Download Platform-tools (adb & fastboot) r.26.0.2 as latests version does not work (or just for me):
https://xiaomifirmware.com/downloads/download-platform-tools-adb-fastboot-r-26-0-0/
3) Download TWRP 3.2.3-0 https://androidfilehost.com/?fid=11410963190603854057 and place file in Platform Tools folder on PC
4) Restart in fastboot mode and flash revovery:
fastboot flash recovery Z1C_twrp_3.2.3-0.img
fastboot reboot
5.1) Download AICP Oreo 8.1 http://dwnld.aicp-rom.com/device/amami/WEEKLY/aicp_amami_o-13.1-WEEKLY-20181204.zip and place file in Platform Tools folder on PC
5.2) Download Gapps Pico https://opengapps.org/?download=false&arch=arm&api=8.1&variant=pico and place file in Platform Tools folder on PC
5.3) Download stable Magisk 17.1 https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip place file in Platform Tools folder on PC
6.1) Load TWRP. Advance>ADB Sideload (for Oreo)
adb sideload aicp_amami_o-13.1-WEEKLY-20181204.zip
(do not restart)
6.2) Repeat Advance>ADB Sideload (for Gapps)
adb sideload open_gapps-arm-8.1-pico-2018XXXX.zip
(do not restart)
6.3) Repeat Advance>ADB Sideload (for Magisk)
adb sideload Magisk-v17.1.zip
(restart)
OrangeFox Recovery
Replace TWRP with OrangeFox once and you won't go back
Changelog:
- Initial Official build.
Contents:
Overview
Why OrangeFox?
Features
Screenshots
Links
Installation procedure
OVERVIEW:
Probably the most beautiful recovery out there.
Synced with the latest Teamwin changes.
Designed with latest Material design 2 guidelines.
Included customization.
Inbuilt patches, like Magisk and password reset patch.
Password protection.
Fully open-source.
Frequently updated.
Why OrangeFox?
OrangeFox has been operating for over two years. In that time OrangeFox have improved the quality, stability, and device support of the recovery. Today OrangeFox is the leader in stability, UI design, and UX. Installing OrangeFox means being with the latest code and fastest fixes.
Treble & Non-Treble Support
No compatibility.zip error while flashing OxygenOS
A lot of customisations
Extremely beautiful UI ready to please your eyes.
Dev team is always ready to fix your problems
F2FS support
Screenshots
Screenshots at
https://imgur.com/a/Ai8KWX9
and on Sourceforge
Links:
Support group: https://t.me/orangefoxop5t
Download: https://orangefox.download/
Installation procedure:
There are two methods to install OrangeFox
A) Via a recovery (for those with TWRP installed):
1. To install an OrangeFox zip, flash it with OrangeFox (or any TWRP-compatible custom recovery) without any wipes.
2. Do the same thing if you want to upgrade OrangeFox
3. When you flash an OrangeFox zip, there is no need to flash any DFE or any other such thing
4.To install an OrangeFox img file, boot into fastboot mode, and run the command: fastboot flash recovery OrangeFox-xyz.img
B) Via Fastboot (For those without a recovery):
You need a PC for this. If you do not have a PC, or access to a PC, then you are stuck!
1. Unlock your bootloader (if not already unlocked)
2. Install adb, fastboot and the relevant USB drivers onto your PCs)
3. Download the correct OrangeFox zip file to your phone, and to your PC
4. Extract recovery.img from the OrangeFox zip file, and copy recovery.img to your PC’s adb directory
5. Reboot your phone into fastboot/bootloader mode
6. Open up a command line window / terminal emulator on your PC
7. Change to the adb directory on your PC
8. Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
9. Reboot into OrangeFox by pressing the power + volume down keys, until you see the OrangeFox splash screen
11. After OrangeFox has booted up, check that everything is working – eg, that it has mounted the data partition successfully, and that the touchscreen works.
12. Find and select the OrangeFox zip on your phone, tap on it, and swipe to install it (because OrangeFox Recovery needs some files from the zip)
After installation, the phone will automatically reboot into OrangeFox
Enjoy!
Hi !
I was kinda excited about this new recovery but official support for oneplus 5 is kinda... Dead, right ?
wund3rdelys said:
Hi !
I was kinda excited about this new recovery but official support for oneplus 5 is kinda... Dead, right ?
Click to expand...
Click to collapse
Yes
official dev did another update
SirRGB said:
official dev did another update an telegram
Click to expand...
Click to collapse
The link is broken
Phantom Thief said:
The link is broken
Click to expand...
Click to collapse
Telegram: Contact @orangefoxop5t
t.me
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by Android 12 and 13 ROMs. This build is tested on OP9 pro, but it was confirmed to work on regular OP9 too.
As always I'm not responsible for any bricked device or data loss resulting from the use of this TWRP builds. You use this at your own risk.
For ROMs using FBEv1 encryption aka A11 encryption, please use the official builds by @Nebrassy from:
[RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Download:
twrp-3.7.0-12.1 - Google Drive
drive.google.com
Installation:
Permanent installation is not possible with TMO stock ROM installed.
Installation overwrites all boot partition changes done previously (e.g. by Magisk or custom kernel). So you have to reflash all zips that change the boot partition after TWRP is installed.
For permanent installation, you have three options depending on your current system.
1. Option for rooted devices:
Download the twrp-installer zip
Flash it with Magisk manager or some other kernel flash utility
Reflash your custom kernel and Magisk.apk if previously installed (see example of how to install with Magisk manager below). Or alternatively flash zips in TWRP.
Don't reboot
Rename downloaded Magisk.apk to Magisk.zip
Open Magisk app
Select Modules tab
Click "Install from storage"
Select Magisk.zip
2. Option for users with other custom recoveries but without root:
Download the twrp-installer zip
Reboot to recovery
Flash it with "adb sideload twrp-installer*.zip"
Reboot to recovery
Reflash your custom kernel and Magisk.apk if previously installed
3. Option is universal:
Download boot.img
Reboot to bootloader
Run "fastboot boot boot.img" with the TWRP boot image on your PC
Go to Advanced > Flash Current TWRP
Reflash your custom kernel and Magisk.apk if previously installed
Try without installation:
Download boot.img
Reboot to bootloader
Run "fastboot boot boot.img" with the TWRP boot image on your PC
Uninstall:
Just flash the boot partition with your current ROMs boot image with the following steps.
Replace "YOUR ROM BOOTIMAGE" with the filename of the extracted boot image of your current ROM.
Reboot to bootloader
Run "fastboot flash boot_a YOUR ROM BOOTIMAGE"
Run "fastboot flash boot_b YOUR ROM BOOTIMAGE"
Alternatively you can flash your currently installed OTA zip, which overwrites boot on the unused slot, but not on the currently used one.
TWRP Updates:
Download and flash the twrp-installer zip
After that reflash your custom kernel and Magisk if previously installed
ROM Updates:
Please follow the official update instructions for your ROM!
If they give an option to update via recovery you have to substitute adb sideload commands with zip installations. Also use the "Automatically reflash TWRP after flashing a ROM" option, if you are going to install a ROM zip to preserve TWRP installation.
In case your ROM does not provide a recovery update instruction you can try to update via recovery but you are on the safe side if you follow the official instructions. They always have a reason for their particular update instructions!
Instructions that work for me (on LOS based ROMs):
Flash ROM zip with "Automatically reflash TWRP after flashing a ROM" checked
Flash your previously installed zips (custom kernel, Gapps, Magisk, etc)
Reboot to system
If Gapps packages keep crashing:
Reboot to TWRP
Flash Gapps again
Reboot to system
For OOS updates should work out of the box, but if you have issues you can follow these steps (I haven't tested them):
[RECOVERY][3.7.0-12.1][UNOFFICIAL][UNIFIED] TWRP with A12/A13 encryption support
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by Android 12 and 13 ROMs. This build is tested on OP9 pro, but it was confirmed to work on regular OP9 too. As always I'm not responsible for...
forum.xda-developers.com
About backups/restore:
Restore data only WITHOUT pin/pattern set.
If you restore a backup made from another ROM, then the currently installed, you may have to format data. So please manually copy all contents from /sdcard to a PC or flash drive.
Backups can be made with or without pin/pattern set. It is always good practice to copy your backups to your PC or an USB drive. Also after you restored your data partition you have to reboot to system and do a second reboot to get a working system.
To make first boot faster and eliminate the need to reboot again, additionally use the step mandatory for OOS users.
If you want to copy your backup to PC, but it doesn't show up, flash change_backup_selinux_context.zip, which is available in download folder.
For OOS users:
When data is restored, you have to delete "/data/system/users/0/package-restrictions.xml" before rebooting to system.
In case you restore a backup with pin/pattern set or have some other issues I have a guide that works for me:
[RECOVERY][3.7.0-12.1][UNOFFICIAL][UNIFIED] TWRP with A12/A13 encryption support
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by Android 12 and 13 ROMs. This build is tested on OP9 pro, but it was confirmed to work on regular OP9 too. As always I'm not responsible for...
forum.xda-developers.com
How to use MTP, adb and fastbootD:
Windows:
Install official Google USB drivers and select the right USB drivers. For MTP and adb, the WinUSB driver is sufficient on Windows 11. For fastbootD, Google drivers (Android Bootloader interface) has to be chosen.
You may have to select WinMTP for MTP and Google USB drivers for adb, if you run Windows 10.
To use adb on Windows, MTP has to be disabled with "Mount->Disable MTP" in TWRP.
Steps for choosing a specific driver (no the exact wording):
Connect phone in specific mode
Open device manager
Right click on phone either under "Android device" or "USB device", depending on mode
Select "update driver"
Select 2. option "browse my computer"
Select "pick from available drivers"
Pick driver according to above description
Linux:
Intall the fastboot and adb packages for your distribution
Set udev rules. There might be a package for your distro or use this gh repo: https://github.com/M0Rf30/android-udev-rules
Add user to the group used in udev rules. Most common are "plugdev" and "adbusers"
Source Code:
TWRP: https://github.com/TeamWin/android_bootable_recovery
Kernel: https://github.com/nilz3000/kernel_oneplus_sm8350-twrp
Device Tree:
https://github.com/nilz3000/device_oneplus_sm8350-common-TWRP
https://github.com/nilz3000/device_oneplus_lemonadep-TWRP
https://github.com/nilz3000/android_hardware_oplus
Bugs:
Permanent installation alongside TMO stock isn't possible
Error message regarding vendor_dlkm in fastbootD for OOS users (just cosmetic and not problematic)
In case you notice anything else please let me know.
If you encounter any bug, please give me description with logcat.txt and recovery.log output attached. You can copy those to your data folder in TWRP, if you go to Advanced->Copy Logs.
Thanks to:
@Nebrassy for the original device tree
@osm0sis for the zip installer
TWRP team
LineageOS
Thank you for this! Will try tomorrow.
Ah man this is dope. Thank you bud!!!
It seems to boot and decrypt very well, but backup always fails with error createtarfork 255
EugenStanis said:
It seems to boot and decrypt very well, but backup always fails with error createtarfork 255
Click to expand...
Click to collapse
EugenStanis said:
It seems to boot and decrypt very well, but backup always fails with error createtarfork 255
Click to expand...
Click to collapse
Can you send me the logcat and recovery.log output of the failing backup? You find that option in Advanced -> Copy Log -> Include Logcat. I will look into it.
Hi Guys,
Can the latest TWRP be used to flash A13 ROMs like we used to do with older devices? I am fed up with wiping the entire storage for every ROM installation using sideloading...
vipinpvarghese said:
Hi Guys,
Can the latest TWRP be used to flash A13 ROMs like we used to do with older devices? I am fed up with wiping the entire storage for every ROM installation using sideloading...
Click to expand...
Click to collapse
Updating A13 ROMs, in my case crdroid 13, works fine. I have not tested clean installation of a different ROM after factory reset with user data preservation.
der_akinator said:
Updating A13 ROMs, in my case crdroid 13, works fine. I have not tested clean installation of a different ROM after factory reset with user data preservation.
Click to expand...
Click to collapse
You meant to say you just wiped data, cache and dalvik and flashed the ROM zip via TWRP ? Or without data wipe?
vipinpvarghese said:
You meant to say you just wiped data, cache and dalvik and flashed the ROM zip via TWRP ? Or without data wipe?
Click to expand...
Click to collapse
Yes, but it was the same ROM I reinstalled after wipe.
der_akinator said:
Can you send me the logcat and recovery.log output of the failing backup? You find that option in Advanced -> Copy Log -> Include Logcat. I will look into it.
Click to expand...
Click to collapse
der_akinator said:
Can you send me the logcat and recovery.log output of the failing backup? You find that option in Advanced -> Copy Log -> Include Logcat. I will look into it.
Click to expand...
Click to collapse
Sorry i forgot about recovery log
EugenStanis said:
Sorry i forgot about recovery log
Click to expand...
Click to collapse
recovery.log
Zippyshare.com - Free File Hosting
www1.zippyshare.com
Anyone tested it with stock OOS13?
der_akinator said:
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by most Android 12 and 13 ROMs.
As always I'm not responsible any bricked device or data loss resulting from the use of this TWRP version. You use this at your own risk.
For ROMs using FBEv1 encryption aka A11 encryption, please use the official builds by @Nebrassy from:
[RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Download:
twrp-3.7.0-12.1 - Google Drive
drive.google.com
Installation:
Get your rom's vendor_boot image. For most ROMs this can usually be downloaded. For OOS based ROMs you can get it for example by extracting it from the official payload.bin with payload-dumper-go. A third universal option, if you have root, is to use the command "dd if=/dev/block/by-name/vendor_boot_SLOT of=/sdcard/vendor_boot.img" on your device. This writes the vendor_boot image to your sdcard folder, but you have to substitute SLOT with either a or b, depending on your currently active slot.
Reboot to bootloader.
Run "fastboot flash vendor_boot vendor_boot.img" with the TWRP vendor_boot image.
Run "fastboot boot boot.img" with the TWRP boot image.
Go to Advanced > Flash Current TWRP.
After that is done, if you were using a custom kernel, reflash it now.
If you were using magisk, reflash it now.
Reboot to bootloader.
Run "fastboot flash vendor_boot vendor_boot.img" with the ROM vendor_boot image from step one.
In the case you just want to test TWRP without installation, please skip steps 5-7.
Permanent installation works fine for me with crdroid 13 and magisk installed. I have not tested any other ROMs or custom kernels. After permanent installation you can at any time reboot to recovery without reflashing vendor_boot. During a ROM update use the "Automatically reflash TWRP after flashing a ROM" option in the install zip menu to preserve TWRP.
Source Code:
TWRP: https://github.com/TeamWin/android_bootable_recovery
Kernel: https://github.com/LineageOS/android_kernel_oneplus_sm8350
Device Tree:
https://github.com/nilz3000/device_oneplus_sm8350-common-TWRP
https://github.com/nilz3000/device_oneplus_lemonadep-TWRP
https://github.com/LineageOS/android_hardware_oplus
Bugs:
Please let me know. I have not encountered anything major yet.
Thanks to:
Nebrassy
TWRP team
LineageOS
Click to expand...
Click to collapse
For the cRDroid 13, which OOS Base are you using? I used C66, with own rec fine, if use your TWRP 3.7.0, can't boot.
Update
Hi everyone,
I just uploaded a new build. It fixes some missing firmware files and kernel module loading.
USB OTG, vibration and battery status is now working.
Download:
29.11.22 - Google Drive
drive.google.com
EugenStanis said:
It seems to boot and decrypt very well, but backup always fails with error createtarfork 255
Click to expand...
Click to collapse
Your problem seems to be a general TWRP problem, that oftentimes happens in multiuser system. And I couldn't access your recovery.log. In this file you find conflicting files, that are the reason for the error.
Here is a link to the github issue, maybe it helps you solving the problem.
createTarFork() process ended with ERROR: 255 when trying to back up data with multiple users · Issue #1373 · TeamWin/Team-Win-Recovery-Project
Yes, I am running an official build of TWRP, downloaded from https://twrp.me/Devices/ (Oneplus 6) Yes, I am running the latest version of TWRP (3.2.3-1) Yes, I have read the FAQ (https://twrp.me/FA...
github.com
tnchng said:
For the cRDroid 13, which OOS Base are you using? I used C66, with own rec fine, if use your TWRP 3.7.0, can't boot.
Click to expand...
Click to collapse
I use C.63 and have not tested with other firmware versions.
der_akinator said:
Your problem seems to be a general TWRP problem, that oftentimes happens in multiuser system. And I couldn't access your recovery.log. In this file you find conflicting files, that are the reason for the error.
Click to expand...
Click to collapse
Strange, i have never ever in my life used multiuser
Code:
Code:
/*
* Your warranty is now void!!!
*
* If sh!t happens, i am not responsible for your bricked device.
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications,
* Do at your own risk!!!
*/
Version and device Information:
Status: Testing
Device: Samsung m33
Codename: m336BU
Android version: android-12 (M336BUXXS4BWB1)
Release Date: April 15, 2023
INSTALLATION
Connect to pc and boot into stock recovery
Factory reset
Reboot into download mode.
flash twrp.tar into the ap slot
reboot to recovery
After that flash samsung multidisabler zip
Reboot to recovery from main menu (not just reboot)
(optional) Backup boot, data, super and dtbo
Reboot to system
Downloads:TWRP Image: twrp-12.1_3.7.0-v000-m33-20230408.tar.md5
Multidisabler: multidisabler-samsung-3.1.zip
wud u also be interested to look into working custom roms for m33 cuz my phone overheats really bad even with optimization and root
ok so i tried to flash with odin but didnt reset phone cuz its custom recovery and people say it shudnt be a problem. anyway when i tried to flash the ap file odin just crashes so i dunno what to do. so now im gonna try to uninstall magisk, then patch the firmware back to stockwith home_csc, then install twrp and then reinstall magisk again and hopefully my data doesnt get wiped but i have the pics saved so its just a huge hassle if that happens.
im very happy to say that my data has been wiped and the recovery file keeps crashing odin. pls offer help if theres any to offer asap cuz i dont wanna lose progress again when i installed everything again
fluffyball21 said:
im very happy to say that my data has been wiped and the recovery file keeps crashing odin. pls offer help if theres any to offer asap cuz i dont wanna lose progress again when i installed everything again
Click to expand...
Click to collapse
Okey, i will fix the isuue asap.
Shibu Shaji said:
Okey, i will fix the isuue asap.
Click to expand...
Click to collapse
hey so i just had to rename the img file inside tar to recovery.img and pack it back to tar.md5 and it flashed. But the phone goes into bootloop after that and cannot be used unless i flash my old recovery file. also im on custom gsi rom android 13 with patched recovery for fastbootd
GitHub - Johx22/Patch-Recovery: CI service that patches recovery.img of Dynamic Samsung devices launched with Android 10 and above to enable fastbootd.
CI service that patches recovery.img of Dynamic Samsung devices launched with Android 10 and above to enable fastbootd. - GitHub - Johx22/Patch-Recovery: CI service that patches recovery.img of Dyn...
github.com
hey btw im also trying to make my own twrp for the phone but mine also bootloops after installation. i also tried other twrp for phones with exynos 1280 like a33 and a53 and they both recognize my device as a33 or a53 on pc when flashed but twrp shows black screen i dunno what else to do at this point
There is really so much need of a custom Rom for this device.
fluffyball21 said:
wud u also be interested to look into working custom roms for m33 cuz my phone overheats really bad even with optimization and root
Click to expand...
Click to collapse
Please could you tell me the steps to install twrp.. and also share me working twrp and gsi for this Device I'm really tired of this buggy One Ui
sunnypoddar1919 said:
Please could you tell me the steps to install twrp.. and also share me working twrp and gsi for this Device I'm really tired of this buggy One Ui
Click to expand...
Click to collapse
There's no working twrp as of now but u can patch the recovery IMG of ur device with the patch recovery link I pasted above. Then u can use fastbootd on ur device then download a working gsi from this list then flash it
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Keep in mind if u don't know what ure doing and don't have backup then if bootloop happens u wud have to reset the device and flash stock firmware through bootloader so continue at ur own risk
fluffyball21 said:
There's no working twrp as of now but u can patch the recovery IMG of ur device with the patch recovery link I pasted above. Then u can use fastbootd on ur device then download a working gsi from this list then flash it
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Keep in mind if u don't know what ure doing and don't have backup then if bootloop happens u wud have to reset the device and flash stock firmware through bootloader so continue at ur own risk
Click to expand...
Click to collapse
could you tell me how can i patch my device recovery because it's first time i'm dealing with samsung for custom roms..i have rooted an another samsung device but for that TWRP was already available
sunnypoddar1919 said:
could you tell me how can i patch my device recovery because it's first time i'm dealing with samsung for custom roms..i have rooted an another samsung device but for that TWRP was already available
Click to expand...
Click to collapse
U need to have stock firmware for ur device then extract the ap file from that zip file. Then extract recovery.img.lz4 from ap file then follow the tutorial in this guide and do as it says. After all that's done ull get a zip file and u can flash that via odin by putting it in ap file slot
GitHub - Johx22/Patch-Recovery: CI service that patches recovery.img of Dynamic Samsung devices launched with Android 10 and above to enable fastbootd.
CI service that patches recovery.img of Dynamic Samsung devices launched with Android 10 and above to enable fastbootd. - GitHub - Johx22/Patch-Recovery: CI service that patches recovery.img of Dyn...
github.com
i have flashed the patched recovery by doing all these steps, could you tell me now how can i flash gsi next by the way i have downloaded pixel experince plus (unofficial from your link that you have provided)
sunnypoddar1919 said:
i have flashed the patched recovery by doing all these steps, could you tell me now how can i flash gsi next by the way i have downloaded pixel experince plus (unofficial from your link that you have provided)
Click to expand...
Click to collapse
Follow this guide
How to Flash a GSI on an Android Device
Follow this guide to flash a GSI on your Android device.
www.makeuseof.com
To get into fastbootd u need to go to recovery mode then select enter fastbootd
fluffyball21 said:
Follow this guide
How to Flash a GSI on an Android Device
Follow this guide to flash a GSI on your Android device.
www.makeuseof.com
To get into fastbootd u need to go to recovery mode then select enter fastbootd
Click to expand...
Click to collapse
When ever i use adb reboot bootloader device boot into download mode and fastboot commands are not working there so i simply can't access fastboot even also adb reboot fastboot or adb reboot fastbootd not working when giving these commands device simply just reboots , please can you tell me how you got into recovery and then into fastboot mode after flashing patched recovery in brief ...And also i think my recovery isn't patched or did not worked after patching may be the script is not working or i made any mistake while using the script so will it work if you attach the patched recovery of your m33 5g device if i flash that using odin?
sunnypoddar1919 said:
When ever i use adb reboot bootloader device boot into download mode and fastboot commands are not working there so i simply can't access fastboot even also adb reboot fastboot or adb reboot fastbootd not working when giving these commands device simply just reboots , please can you tell me how you got into recovery and then into fastboot mode after flashing patched recovery in brief ...And also i think my recovery isn't patched or did not worked after patching may be the script is not working or i made any mistake while using the script so will it work if you attach the patched recovery of your m33 5g device if i flash that using odin?
Click to expand...
Click to collapse
Reboot to recovery from phone then choose enter fastbootd option if it is there. If it is not then u need to patch the recovery again and download that then flash that with Odin. I don't have the patched file with me now so in the meantime try again
fluffyball21 said:
Reboot to recovery from phone then choose enter fastbootd option if it is there. If it is not then u need to patch the recovery again and download that then flash that with Odin. I don't have the patched file with me now so in the meantime try again
Click to expand...
Click to collapse
tried , tried and tried and now i'm tired i think for me it's not possible
U just need extract it then flash it with odin in ap slot also while having auto restart off in options
fluffyball21 said:
U just need extract it then flash it with odin in ap slot also while having auto restart off in options
Click to expand...
Click to collapse
if auto restart has to be off then how would i restart into recovery from download mode means which button combination i have to press
sunnypoddar1919 said:
if auto restart has to be off then how would i restart into recovery from download mode means which button combination i have to press
Click to expand...
Click to collapse
U gotta press volume down and power after it finishes flash then immediately switch to volume up and power key combination when the screen turns black. If u failed to get fastbootd u need to do it again by either reboot to bootloader from recovery or pressing volume down and power on bootscreen then pressing volume up and down while USB is connected to computer and reflash. Once u do it successfully I think it wud be there for the next time without issues