Develop Bugs

Tutorial Viper4AndroidFX on AEX ROM

Hi,if u like V4A audio efect.ill share how u can use V4A in AEX rom.
First,u must rooted and install busybox.
-Ok if u done upper step,lets boot your zuk z2 into twrp
flash v4a4.2.zip(V4A 4.2) and reboot system.
-Now launch V4A,install driver and reboot
Ok,now its time to update latest V4A version 2.5.0.5
-Install RootExplorer (optional) or u can use twrp file manager to delete V4A 4.2 apk in system.
-Flash V4A 2.5 in twrp and u done.
Optional you can delete apk in system or disable MusicFx.

thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.

raketman said:
thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.
Click to expand...
Click to collapse
If you using root explorer try find viper4android 4.2 folder in root/system/priv-app.

Thank you for your information. I have got much easier way to use it(if you have magisk installed). First install the viper4android zip using twrp. Reboot. Then open mgix go to download and select viper4android. Just tap on the arrow and tap on install. After installing it will ask your permission to reboot. Just reboot your device and enjoy. Sounds tricky but process is as simple as water.

I flashed ARISE and it worked normally. But as for sound quality...meh

n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!

n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.

arch_geek said:
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!
Click to expand...
Click to collapse
zakwanPHG said:
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.
Click to expand...
Click to collapse
If the hardware is ****e any kind of software is not going to make it good. It's not magic.

does it work on aex 5.1 ,( the january update)?

Haha, very timely post. I was trying to get Viper for the first time on Oreo two days ago.
One question, are apps other than music players processed by Viper as well? I ask because I installed Arise but emulators and games didn't get audio processing, only my music players.
Thanks!

I'm getting driver install failed error I/o while setting up v4a on Validus 8.1

I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?

Hey I was wondering if viper is working on Oreo or not.

Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
Same on AEX v5.1

Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
I'm having same error
I'm on bootleggers ROM March build 8.1 Oreo
Pls help
I finally installed it via magisk
And it's working
Pls suggest some settings to get max phone speaker volume

Stuck on booting
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
After flashing arise+magnum opus phone stuck in booting.it takes half an hour & nothing happen..
help me

LDAC 8.1

So I have been trying to get LDAC or apt-X working on my razer phone but it has not worked. I am on the latest stock ROM rooted with magisk (via ADB not TWRP) and with the rayglobe magisk module installed but it just stays on AAC. My headphones are Sony WH-1000XM2 and LDAC was working when using the resurrection remix ROM from the development thread but I had to uninstall the ROM due to instability and no sign of progression. Any help would be appreciated.

Firebuster said:
So I have been trying to get LDAC or apt-X working on my razer phone but it has not worked. I am on the latest stock ROM rooted with magisk (via ADB not TWRP) and with the rayglobe magisk module installed but it just stays on AAC. My headphones are Sony WH-1000XM2 and LDAC was working when using the resurrection remix ROM from the development thread but I had to uninstall the ROM due to instability and no sign of progression. Any help would be appreciated.
Click to expand...
Click to collapse
They locked it down somehow I think. I have 2 threads in here asking for help but no one seems to be able to help me. For added reference, here is the error produced even when all the files are added with root to enable aptx or ldac

I installed the magisk aptx&aptxHD module and modified /system/vendor/build.prop then aptx got working.
(I couldn't test with aptxHD or LDAC cos I have no compatibe device with them.)
Code:
persist.vendor.bt.a2dp_offload_cap=sbc-aac
to
Code:
persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptXHD
This is the same parameter the magisk module set to /system/build.prop.
To guess, LDAC will may work if an appropriate value set to the prop.

ClubRaptor said:
I installed the magisk aptx&aptxHD module and modified /system/vendor/build.prop then aptx got working.
(I couldn't test with aptxHD or LDAC cos I have no compatibe device with them.)
to
This is the same parameter the magisk module set to /system/build.prop.
To guess, LDAC will may work if an appropriate value set to the prop.
Click to expand...
Click to collapse
This worked to enable switching to them however now Bluetooth just crashes. I changed it to persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-ldac
Edit:
Some interesting notes. I tried a few steps to debugging including readding AAC to the list which did nothing but if I only add aptx then the Bluetooth app no longer crashes however no sound plays so I'm guessing it's the lib files that are not correct? I just used the aptx package in magisk so if there's any other that I'm missing or other suggestions that would be useful

Firebuster said:
This worked to enable switching to them however now Bluetooth just crashes. I changed it to persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-ldac
Edit:
Some interesting notes. I tried a few steps to debugging including readding AAC to the list which did nothing but if I only add aptx then the Bluetooth app no longer crashes however no sound plays so I'm guessing it's the lib files that are not correct? I just used the aptx package in magisk so if there's any other that I'm missing or other suggestions that would be useful
Click to expand...
Click to collapse
I still can't get it to switch to aptx (the one I want) or ldac. It still falls back to SBC usually or aac if I'm on a different speaker. Any idea what I'm doing wrong? I'm on slot a on my device, rooted with magisk and I have tried multiple aptx modules. Is there a specific build.prop editor you use? Both my speakers and headphones support it and work with other devices and I'm still getting the error I replied with above (page one)
I'm an experienced rooter, so don't be afraid to fully explain any steps I may be missing out!

manor7777 said:
I still can't get it to switch to aptx (the one I want) or ldac. It still falls back to SBC usually or aac if I'm on a different speaker. Any idea what I'm doing wrong? I'm on slot a on my device, rooted with magisk and I have tried multiple aptx modules. Is there a specific build.prop editor you use? Both my speakers and headphones support it and work with other devices and I'm still getting the error I replied with above (page one)
I'm an experienced rooter, so don't be afraid to fully explain any steps I may be missing out!
Click to expand...
Click to collapse
I used root explorer and changed the build.prop entries in system\vendor\. In the first place I used the root essentials build.prop editor which shows a different build.prop. other than that I literally just edited that line and that allowed me to change it. I can't think of anything else I did other than install a bunch of library files which I'm guessing you found the same ones as me because it was very limited on what was available and up to date

Firebuster said:
I used root explorer and changed the build.prop entries in system\vendor\. In the first place I used the root essentials build.prop editor which shows a different build.prop. other than that I literally just edited that line and that allowed me to change it. I can't think of anything else I did other than install a bunch of library files which I'm guessing you found the same ones as me because it was very limited on what was available and up to date
Click to expand...
Click to collapse
OK, awesome. You rock. That got it to select aptx - now my 2nd problem, no audio! I can see in dev options and bt settings that it's showing aptx, but I get no audio (well, I get an almost click click click noise) then my Bluetooth adaptor for my headphones crashes. And it forces my headphones to turn off. I tried 3 different magisk modules for the library files, any ideas - I was getting SBC audio before

manor7777 said:
OK, awesome. You rock. That got it to select aptx - now my 2nd problem, no audio! I can see in dev options and bt settings that it's showing aptx, but I get no audio (well, I get an almost click click click noise) then my Bluetooth adaptor for my headphones crashes. And it forces my headphones to turn off. I tried 3 different magisk modules for the library files, any ideas - I was getting SBC audio before
Click to expand...
Click to collapse
Sounds like the same problem I am having. Aptx doesn't work and aptx HD and LDAC just crash Bluetooth. Genuinely have no idea where to go from here. It must be a driver or library file. Real shame it's not working.

Edit: seems to be looping these messages in catlog

Firebuster said:
Sounds like the same problem I am having. Aptx doesn't work and aptx HD and LDAC just crash Bluetooth. Genuinely have no idea where to go from here. It must be a driver or library file. Real shame it's not working.
Click to expand...
Click to collapse
OK, so last night and this morning I have been just messing with things. I no longer crash my headphones and force them to turn off, but I still have no audio over aptx - though at least it's not crashing my headphones (Bluetooth in the phone was always OK). There is one error I'm getting and I'm not sure if its related of not, but is to do with a buffer failing to release. See my screenshots of logs (just documenting here for reference)

so basically i went your path a few days ago and dropped that idea. please post updates if you manage to get aptx\aptx hd\ldac working (Razer Phone + Sony WH-1000 XM2)

hatemosphere said:
so basically i went your path a few days ago and dropped that idea. please post updates if you manage to get aptx\aptx hd\ldac working (Razer Phone + Sony WH-1000 XM2)
Click to expand...
Click to collapse
Cc @Firebuster
So, I might be an experienced rooter (no 1 click toolkits here) I am NOT a developer. I've tried a combination of a bunch of things to try and get this to work, and nothing has!
I did however get it to work by installing a GSI (basically a rom) to the device, but even that was painful to get working (well, installed). Now running AOSP 8.1 GSI w/gapps and I flashed magisk for root. I then installed the Aptx magisk module from the built in repo and it works perfectly fine. Not sure if It's something in razer software as I'm technically more up to date now so it's not like I was using the wrong drivers.
Can't find a decent dolby atmos I can install that will work along side v4a, all the magisk modules are for android 7 or 6.
Otherwise that's the only way I have found so far, sorry guys! - benefit is, other than AOSP's ****ty camera app (use the gcam port instead), literally everything works fine, and I even get stronger vibration on a GSI

manor7777 said:
Cc @Firebuster
So, I might be an experienced rooter (no 1 click toolkits here) I am NOT a developer. I've tried a combination of a bunch of things to try and get this to work, and nothing has!
I did however get it to work by installing a GSI (basically a rom) to the device, but even that was painful to get working (well, installed). Now running AOSP 8.1 GSI w/gapps and I flashed magisk for root. I then installed the Aptx magisk module from the built in repo and it works perfectly fine. Not sure if It's something in razer software as I'm technically more up to date now so it's not like I was using the wrong drivers.
Can't find a decent dolby atmos I can install that will work along side v4a, all the magisk modules are for android 7 or 6.
Otherwise that's the only way I have found so far, sorry guys! - benefit is, other than AOSP's ****ty camera app (use the gcam port instead), literally everything works fine, and I even get stronger vibration on a GSI
Click to expand...
Click to collapse
Yeah I might move onto that too. To try to fix the Bluetooth issues. I can only assume razer excluded some of the functionality but since it's baked into android 8 I don't see why they would remove it.

Razer and their development team is already informed about this issue, and they have correctly addressed it, and all the Bluetooth issues (which were a few), in the upcoming update MR2. No ETA.

linuxct said:
Razer and their development team is already informed about this issue, and they have correctly addressed it, and all the Bluetooth issues (which were a few), in the upcoming update MR2. No ETA.
Click to expand...
Click to collapse
so i've just got a new update and now i'm wondering if we should try this again...

hatemosphere said:
so i've just got a new update and now i'm wondering if we should try this again...
Click to expand...
Click to collapse
Go ahead, I can't since I'm on a Pie GSI.
If anyone has an LDAC BT Headset please give this a try.
cc @Firebuster

Great news, I just spent 2 hours updating my phone, with flashing back to stock because the OTA did not want to update me since I had Magisk, then putting everything back like before.
The update did not change anything.

Tried to do my research on issues with the Razer phone before getting it, but I guess this is just one of those things you don't comprehend until actually having the device in your hands. I came from a Oneplus One on Lineage OS and am comfortable with flashing (but no experience with GSI yet).
My razer phone is stock and not rooted. Anything I can do to contribute to test getting Apt-X working? The settings says my phone is up to date (build number OPM1.171019.011-RZR-180803.6033).

Got the official Pie installed - no LDAC nor AptX still.

cubeover said:
Got the official Pie installed - no LDAC nor AptX still.
Click to expand...
Click to collapse
you installed the official pie update for the razer phone 1?

[GUIDE] How to install Viper4Android and Dolby Digital Plus.

I have successfully put together a method to get Dolby Digital Plus and Viper4Android running on Redmi Note 8 Pro. Firstly I am rooted on 11.0.6 Global and using LR-TWRP as recovery. On another note I have tried nearly every recovery on this Forum but the only one that doesn't give me a black screen the LR-TWRP.
1. First you need to get the Android running in Permissive mode. For me the Magisk module DID NOT work. To get permissive I found a file on another forum that someone was using on other Redmi devices. It works perfectly with no flaws. Boot into TWRP flash Permissiver_v4_2.zip. And boot back into the device.
***Note.. If you upgrade rom using TWRP as I did from 11.0.2 to 11.0.6. You will have to reflash this file to get everything running properly.
2. Open Magisk and flash ViPER4Android_FX-v2.7.1.0(2710).zip. Reboot device and the open V4A. You should be prompted to install driver. Do so and reboot if prompted to, I don't remember for sure if it makes you or not.
3. Open Magisk and flash 2.1Audio_Modification_Library-v2.4.zip and then reboot.
***NOTE.. Only this version of Audio Modification I have had luck with getting this to run. I updated this file after having everything completely setup and working and it broke V4A and Dolby. Had to uninstall and reinstall this version..
4. Boot into TWRP, NOT Magisk and flash Dolby_Digital_Plus_v.6.5.zip
5. On reboot confirm everything is working. For me it is working flawlessly. Below is a link to the files you will need.
DOWNLOAD

Gonna try this now because the previous tutorial about v4a does work but the moment I plug in my earphones, the status changes to "abnormal"

djgilquirino said:
Gonna try this now because the previous tutorial about v4a does work but the moment I plug in my earphones, the status changes to "abnormal"
Click to expand...
Click to collapse
That is likely due to your phone not being in permissive mode. I've seen that guide as well. I took my past knowledge of getting Viper + Dolby to work and came up with this solution. Being in permissive mode is required for both apps to function

I just found out the reason why my V4A doesn't work when I plug in my headset/earphones. To all those who use poweramp and set your output to "Hi-Res Output", make sure your sample rate is set to 48khz. Setting it to 96khz and up changes the status on V4A to abormal and won't work.

Thanks bro. It is working for me as well you made my day..

rraghava10 said:
Thanks bro. It is working for me as well you made my day..
Click to expand...
Click to collapse
Awesome my dude!! Glad I could help. I'm new to writing guides but love this device and would like to encourage its development as much as I can.

When I flash V4A it functions properly however my SIM card is no longer recognize. When I uninstall V4A my sim is restored. What's up with that?

chugs said:
When I flash V4A it functions properly however my SIM card is no longer recognize. When I uninstall V4A my sim is restored. What's up with that?
Click to expand...
Click to collapse
That is extremely weird. Never heard of anything like that before. Just a couple thoughts but do you have BusyBox installed through Magisk and have your phone set to permissive already?? Also what MIUI version are you running. I have tested this successfully on 11.0.2 and 11.0.6 Global.

I'm still down on 10.4. I haven't been convinced to move to 11

Worked perfectly from EEU (EU) rom moved to 11.0.6 (Global)!
Thank you very much!

alejandromujica.rsm said:
Worked perfectly from EEU (EU) rom moved to 11.0.6 (Global)!
Thank you very much!
Click to expand...
Click to collapse
Your welcome and that's awesome.. Glad I could help bro!

https://ibb.co/YLt7r7s result miui global 11.0.2 err

anasfanani said:
https://ibb.co/YLt7r7s result miui global 11.0.2 err
Click to expand...
Click to collapse
You are not permissive. That is the exact error I got before I found the file I reference to flash to get 'permissive'. To check your status go to terminal and first 'su' to get root. Then type 'getenforce'. Make sure your device is showing permissive. If this is notthe problem I would be surprised. Let me know and I will help you work the problem..

bpawnz said:
You are not permissive. That is the exact error I got before I found the file I reference to flash to get 'permissive'. To check your status go to terminal and first 'su' to get root. Then type 'getenforce'. Make sure your device is showing permissive. If this is notthe problem I would be surprised. Let me know and I will help you work the problem..
Click to expand...
Click to collapse
Thanks. The problem is in selinux magisk module. I uninstalled and install other selinux app from https://github.com/MrBIMC/SELinuxModeChanger and its works

anasfanani said:
Thanks. The problem is in selinux magisk module. I uninstalled and install other selinux app from https://github.com/MrBIMC/SELinuxModeChanger and its works
Click to expand...
Click to collapse
Awesome. The file I reference will change se status from boot. That app I think you have to set it after every reboot if I remember correctly. Regardless I'm glad you got it working. FYI.. Dolby won't show up as an installed app if your not running permissive as well. I know that from trial and error. Glad you got it working!

Steps work. Will confirm if this is any better than standalone V4A
[Update]
Yup. Definitely way better sound quality comparing to the previous methods i used. Also thanks for sharing permissiver.. The previous way i used to change SELinux was a massive pain in my neck. (Global phone on 11.0.2 Global ROM) Looking to see how v4a will fare in upcoming custom ROMs.

Do we have any dual speaker audio sound mod for our note 8 pro global?

+1 to dual speaker mod!

bpawnz said:
Awesome. The file I reference will change se status from boot. That app I think you have to set it after every reboot if I remember correctly. Regardless I'm glad you got it working. FYI.. Dolby won't show up as an installed app if your not running permissive as well. I know that from trial and error. Glad you got it working!
Click to expand...
Click to collapse
Dolby digital is not working after android 10 update... need the version update

Dear all, please note and be aware, this mod will not work on android 10 because
1. dolby digital version is not supported as i stated earlier..
2. when we change SE linux to permissive, phone becomes laggy and many secured application will not work... i have personally tried that may be because of high security of android 10.. i think we will need a custom rom

Question Viper 4 Android and Pixel 6 Pro

Has anyone gotten Viper 4 Android to work with the pixel 6 pro yet? If not, are there alternatives? Any guides to doing this would be appreciated! I searched but didn't find much.

Android 12 (Viper4Android)
Has anyone managed to get Viper4Android working on the latest beta of Android 12? The usual methods don't work (makes sense, since its a new OS). Just curious. I like Android 12 so far, but might roll back to 11 if I can't get Viper going...
forum.xda-developers.com

Followed the guide in that thread and got it installed and seems to be working, any recommendations on the profiles for the speakers or the pixel buds a?

FabricatorGeneral said:
Seguí la guía en ese hilo y lo instalé y parece estar funcionando, ¿alguna recomendación sobre los perfiles para los altavoces o los botones de píxeles?
Click to expand...
Click to collapse
norteDon't put much Bass on the speakers because they over time deteriorateBass on the speakers because they over time deteriorate

For those that don't want to change their kernel to permissive due to security reasons, I used this method and is working fine for me. Legacy mode needs to be toggled on.
Viper4Android
Anyone get this working yet?
forum.xda-developers.com

Lughnasadh said:
For those that don't want to change their kernel to permissive due to security reasons, I used this method and is working fine for me. Legacy mode needs to be toggled on.
Viper4Android
Anyone get this working yet?
forum.xda-developers.com
Click to expand...
Click to collapse
i didnt have to change to permissive. the 2nd. file is a Android 12 fix, i believe if you use the fix you do not have to change to permissive....

AndroidAddict420 said:
i didnt have to change to permissive. the 2nd. file is a Android 12 fix, i believe if you use the fix you do not have to change to permissive....
Click to expand...
Click to collapse
I was referring to the method linked in Post #2 where they said they changed their kernel to permissive. The Android 12 fix file is from another thread which you started and posted the file it. You might want to add a link to your post so people know what "fix" file you are talking about since it's not in this thread, lest people might get confused about what you are talking about.
Or maybe I'll just link it here...
Interested in a Working Formula to get Viper4Android Working? (ROOT)
Viper4Android for Google Pixel 6/6 Pro and most other devices on Android 12... It the time of testing this Method, it worked in November 2021 and December 2021 builds for my Google Pixel 6.... 1) Make sure your BL is unlocked and you are...
forum.xda-developers.com

I installed by using the method I had to do for OP8T. Install Audio_Modification_Library Magisk Module (DO NOT REBOOT) -> Install Viper Magisk Module (DO NOT REBOOT) -> Open Viper App (this forces a reboot) -> Remove Audio_Modification_Library. It works great for me in apps like AIMP, but in apps like YouTubeVanced have never worked for me.

card13 said:
I installed by using the method I had to do for OP8T. Install Audio_Modification_Library Magisk Module (DO NOT REBOOT) -> Install Viper Magisk Module (DO NOT REBOOT) -> Open Viper App (this forces a reboot) -> Remove Audio_Modification_Library. It works great for me in apps like AIMP, but in apps like YouTubeVanced have never worked for me.
Click to expand...
Click to collapse
Strange it doesn't process with YouTubeVanced for you. It should. Have you tried giving this mod a shot?
EDIT: Actually I think the version located at John Fawkes site is newer than the XDA one, so adding that link.
Audio Compatibility Patch (Formerly Universal deep_buffer Remover) [MMTEx]
This fixes music and streaming apps (Spotify, Pandora, etc) that aren't processing audio effects for various equalizer applications through the modification of audio policy. Starting with v1.6 USB_policy patcher (upp) and Notification_helper...
forum.xda-developers.com
John Fawkes Playground

@Lughnasadh I'm not currently using the Compatibility Patch. It's mainly because last time I did on the OnePlus phones, my Bluetooth audio would get fubar'd and require a Factory Reset to fix.

Thanks to the community, the Viper4android works for me on Pixe6 PRO, BUT I am unable to activate any VIPER-DDC , Headset correction profiles loading takes no effect, tried a few I see them active but no change in sound. Previously my OnePlus 8Pro worked fine with the same version (Android 12). Does anyone experience similar issue ? Can you please try and let me know.

ansher said:
Thanks to the community, the Viper4android works for me on Pixe6 PRO, BUT I am unable to activate any VIPER-DDC , Headset correction profiles loading takes no effect, tried a few I see them active but no change in sound. Previously my OnePlus 8Pro worked fine with the same version (Android 12). Does anyone experience similar issue ? Can you please try and let me know.
Click to expand...
Click to collapse
I don't have answer for your question, perhaps go to their Telegram group to ask for help as you may have more chance there.
I do have something for your consideration. I used V4A for longer than I can remember but it must be over 10 years. However, seems the developer has already quitted the project for quite sometime, the driver has never been updated in the past 7-8 years, we are lucky that it is still working with A12. But everything has an end, I tried it on A13 Beta and it doesn't work with it. If you search the web, you properly going to find that so far no one is able to make it work with A13. The A13 is already in beta 4 and official release could be sometime in next month, unless you are going to give up to update to A13, you better start to find something to replace V4A, my choice is JamesDSP but you may find something better suit your needs.

I prefer presets because I don't know what I'm doing. I ended up moving to PowerAmp and am usually pleased with the sound. If only the developer would enable roor features, man that would be cool.

Thanks acwcanada for the suggestion. I looked at the thread and so far may stick with Android 12 (those crazy audiophiles ) because I could not find 2 key features available in Viper4Android.
1. Headphone frequency response correction (VIPER-DDC or AutoEQ in Wavelet). This feature does not even work for me in Pixel 6 pro A12L , workaround: install wavelet and use its AutoEQ feature.
2. Dynamic System feature of Viper4Android creates bass subharmonics using reference frequencies and algorithm (selectable by choosing headphone type), so it can inject them in the music making it feel much richer and restores lack of low frequencies without "booming" effect created by other bass boosters. So far nothing in this word can beat this Viper4Andoid's feature.
Some good news folks: Viper4Android and Wavelet can be stacked and work in tandem .
Perhaps going to write James to consider the above, unless I missed it.
Cheers and thanks Team !

Question Atmos support with Magisk

Hello,
Has anyone here been able to use some Magisk module or any other way to enable Dolby Atmos on these phones? I've tried 3 or so different Atmos Magisk modules now and every one of them froze the phone on either the Google logo or on the boot animation (and I had to manually reflash, remove the module files and reinstall Magisk).
The three I've tried already:
some random one from the forums (author hellboy017, for 1+ 8 series) - I don't remember where I got it from anymore
Dolby Atmos Magic Revision
Dolby Atmos Razer Phone 2
None of these worked. By the way I'm not running stock but Evolution X instead - latest build of it. I don't think it matters but I mentioned just in case it does.
I'd like to get Atmos working because I got a 3mo trial of Apple Music which supports Atmos but not on Pixels. My $300 Samsung supports it...

I can't help with Dolby Atmos but you can use viper4android re
GitHub - AndroidAudioMods/ViPER4Android: ViPER4Android app configuration files
ViPER4Android app configuration files. Contribute to AndroidAudioMods/ViPER4Android development by creating an account on GitHub.
github.com

Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.

Kris Chen said:
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Click to expand...
Click to collapse
Link?

Kris Chen said:
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Click to expand...
Click to collapse
Using Magisk Delta? I tried installing it multiple ways - direct install, recovery sideload, patching boot image with and without uninstalling normal Magisk before, but I get the same issue - the EvoX boot animation stops after a few seconds, then it resumes after a few seconds and this goes on without booting... Tried ADB to get some insight but windows says that the device couldn't be recognized.

KszKristof said:
Using Magisk Delta? I tried installing it multiple ways - direct install, recovery sideload, patching boot image with and without uninstalling normal Magisk before, but I get the same issue - the EvoX boot animation stops after a few seconds, then it resumes after a few seconds and this goes on without booting... Tried ADB to get some insight but windows says that the device couldn't be recognized.
Click to expand...
Click to collapse
Yes, I use Magisk Delta but stock A13 ROM with May security patch.

Suavie103 said:
Link?
Click to expand...
Click to collapse
*** As modder's suggestion, you may need to have magisk delta and make it work ***
1. Install Moto Core in Magisk Manager(https://www.pling.com/p/1978575/)
2. Install G52 in Magisk Manager(https://www.pling.com/p/1908400/)
3. If you have multi audio mod, remeber to install AML(https://www.pling.com/p/1981006/)
4. Install this EQ profile patch in Magisk Manager(https://djxmaza.in/when-to-hoard-and-cash-out-in-crypto-trading/)
Good luck !

Kris Chen said:
*** As modder's suggestion, you may need to have magisk delta and make it work ***
1. Install Moto Core in Magisk Manager(https://www.pling.com/p/1978575/)
2. Install G52 in Magisk Manager(https://www.pling.com/p/1908400/)
3. If you have multi audio mod, remeber to install AML(https://www.pling.com/p/1981006/)
4. Install this EQ profile patch in Magisk Manager(https://djxmaza.in/when-to-hoard-and-cash-out-in-crypto-trading/)
Good luck !
Click to expand...
Click to collapse
the step 4 link not right?

chen1136a said:
the step 4 link not right?
Click to expand...
Click to collapse
Why don't you think it's not right ?
That version is the mod of AML to make it more compatible with multi audio mod in your phone.

Don't know when will be blocked by admin but I I still posted the discussion board here