Develop Bugs

[Project Treble][UNOFFICIAL] for Wileyfox Swift 2/Plus/X

/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Project Treble
Important!
Recommended for installation only for advanced users​***What is Project Treble? ***
Project Treble allows to install - Generic System Images on our device with a minimum number of bugs.
Vendor - this is partition where proprietary files and drivers are stored, which are separate from the system.
***Userful Information***
Project Treble XDA Thread
Generic System Image (GSI) list
***Development and bugs***
Development has been started about 3 months. backwards During this time, dozens of errors were corrected and millions of nerve cells were lost.
Vendor is based on the stock firmware UOS273C with a large number of edits.
The kernel is used from vm03 with driver edits for working on Project Treble.
Bugs in Generic System Images:
On Oreo and Pie GSIs don't working SafetyNET.
My Magisk Module: Wileyfox Swift 2 SafetyNet Pass
Bugs in Vendor:
SELinux Permissive
For the fingerprint scanner to work correctly before being added to Settings, it is necessary to “poke” 5-6 times into it, for the driver to load correctly.
***Preparing device for support Project Treble***
Download TWRP Treble
Repartition script 16GB or 32GB
Download Treble Vendor
Download Treble Boot
Mirror on Google Drive
Mirror on Cloud Mail.ru
If you want get back default partition table just flash:
Download Revert - 16GB
Download Revert - 32GB
You need to copy all the necessary information to an external memory card or PC, since the internal memory will be formatted and devided into special partitions for Project Treble can work.
​
Install TWRP Treble in a convenient way for you.
Install Repartition script in TWRP. Depending on your internal memory size.
After installing repartition script, device will automatically reboot into Recovery, where you must do:
Format Data (Wipe > Format Data)
Wipe Vendor (Wipe > Advanced Wipe > Vendor)
After that necessarily to reboot the Recovery (Reboot > Recovery)
Flashing Treble Vendor (Just install zip archive)
Flashing Treble Boot (Select the option in the lower right corner Install Image, select Boot_Treble_new.img and flash it as Boot Image)
Install your favorite firmware (about this below). (Select the option in the lower right cornerInstall Image, than flash it as System Image)
***Installing Android Oreo or Android Pie GSIs***
Flash any GSi from Generic System Image (GSI) list or XDA Thread
always choose arm64 A-ONLY!
* If camera don't working on Pie flash:
Camera Pie GSI patch
* If the NFC item in the settings hangs, or the NFC does not turn on (this is usually the case in the old October GSI), flash:
NFC all GSI Patch
* Patch for fix fingerprint scanner on some Pie GSIs
Folder with patches
For ArrowOS GSI, HavocOS 2.0, AEX 6.1 fix not needed.
***Google Apps***
Install GApps only before the first launch of the ROM!
Open GApps Project
***Thanks***
Testing and moral support:
Kirill_MegaFon (4PDA)
xyzmean (4PDA)
Zent16 (4PDA)
backspace696 (4PDA)
Help in bug fixes and kernel sources:
vm03 (XDA)
Mirrors for download files:
anatoliy-is (4PDA)
Fingerprint overlay:
creativchic (4PDA)
XDA:DevDB Information
[Project Treble][UNOFFICIAL] for Wileyfox Swift 2/Plus/X, ROM for the Wileyfox Swift 2
Kernel Sourses
DevelopedInside
Contributors
fx-mod
ROM OS Version: Android 8.1.x and Android 9.x
Version Information
Status: Beta
Created 2018-09-30
Last Updated 2018-09-30

Never heard of 'Project Treble' before, but it sounds very interesting to be able to use 'Generic System Images'.
Before playing around with it - can you please also provide a 'Repartition Script' to get back to the default Partitioning ?

fred0r said:
Never heard of 'Project Treble' before, but it sounds very interesting to be able to use 'Generic System Images'.
Before playing around with it - can you please also provide a 'Repartition Script' to get back to the default Partitioning ?
Click to expand...
Click to collapse
To return the phone to stock, just install Factory Firmware.

fred0r said:
Never heard of 'Project Treble' before, but it sounds very interesting to be able to use 'Generic System Images'.
Before playing around with it - can you please also provide a 'Repartition Script' to get back to the default Partitioning ?
Click to expand...
Click to collapse
Done!

i installed treble according to your instruction and flashed a AOSP 8.1 image (system-arm64-aonly-gapps-su.img.xz) which should include gapps and su.
unfortunately the su-part wasnt available, so i tried to boot into the recovery by selecting it during the start of the phone - but i instantly came back to the 'boot-screen' without starting twrp.
for now the only way to get back on the 'treble-twrp' i need to boot it via fastboot (fastboot boot TWRP_Treble_marmite.img)
i this a bug or am i doing something wrong ?
[edit]
installed another rom which had the option in developers to reboot directly into the recovery - that worked.
---------- Post added 5th October 2018 at 12:12 AM ---------- Previous post was 4th October 2018 at 11:43 PM ----------
Now i installed the latest Oreo Resurrection-Remix from https://downloads.resurrectionremix.com/arm64aonly/ and during startup:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another thing is, that on all GSI-Images i installed so far the system-fonts are very tiny - like it's using a too high screen-resolution.

fred0r said:
......so i tried to boot into the recovery by selecting it during the start of the phone - but i instantly came back to the 'boot-screen' without starting twrp.
for now the only way to get back on the 'treble-twrp' i need to boot it via fastboot (fastboot boot TWRP_Treble_marmite.img)
i this a bug or am i doing something wrong ?
Click to expand...
Click to collapse
Nevermind - it works also to boot from the start. i needed first to select 'boot recovery' and then press on 'start' to boot into it.
Just installed the GSI from PixelExperience from pixelexperience.org and also get that 'vendor mismatch' message.

fred0r said:
Nevermind - it works also to boot from the start. i needed first to select 'boot recovery' and then press on 'start' to boot into it.
Just installed the GSI from PixelExperience from pixelexperience.org and also get that 'vendor mismatch' message.
Click to expand...
Click to collapse
I had this issue too and I believe flashing the vendor zip again did the job for me, not completely sure though.

xXxSAMIxXx said:
I had this issue too and I believe flashing the vendor zip again did the job for me, not completely sure though.
Click to expand...
Click to collapse
vendor miscmatch message is a warning. Not an error!

a great work ..soon i will get this device

I'd like to try out Android P. Has anyone tried this with a Swift 2 device and can recommend a GSI to use?
Edit: I couldn't get Pixel Experience (9.0) to boot succesfully but phhusson's AOSP 9.0 works. It's very barebones indeed. Someone made an overlay that makes adaptive brightness possible but I still can't adjust the LED for notifications. Not being able to turn off the charging/low-battery LED is a bummer. Otherwise it runs fine but I'll try a different GSI today.

Did you use the arm64 a-only image? I tried the arm a-only and that wouldn't boot but I'm (quite) happily buzzing along with the former.

fx-mod said:
* Patch for fix fingerprint scanner on some Pie GSIs
Phh AOSP 9 v106 [02/10/2018] only
ArrowOS 9 [23/09/2018] only
Pixel Experience P [20/09/2018] only
Click to expand...
Click to collapse
Is it possible to update the Pixel Experience P fingerprint scanner patch? The latest version of the ROM fixes the hotspot issues but the fingerprint scanner patch does not work.

erasmuswill said:
Is it possible to update the Pixel Experience P fingerprint scanner patch? The latest version of the ROM fixes the hotspot issues but the fingerprint scanner patch does not work.
Click to expand...
Click to collapse
it is done!

wileyfox swift 2X with 32GB storage.
32 gb repartition file ? or should i use 16 gb ?
just to be sure i'm not destroying my phone

waver1967 said:
wileyfox swift 2X with 32GB storage.
32 gb repartition file ? or should i use 16 gb ?
just to be sure i'm not destroying my phone
Click to expand...
Click to collapse
32 GB of course

failed to mount system
after doing all the steps twrp says no os installed

oeps my mistake..
forgot to unrar gsi file

Is it possible to patch at least one of Pie GSI's to work almost perfectly? Right now it is not possible to use any of GSI's for more than a week because every one have some annoying bugs

puszekkk said:
(
Click to expand...
Click to collapse
What does not suit you?

anatoliy-is said:
What does not suit you?
Click to expand...
Click to collapse
Broken hotspot, dumped fingerprints after reboot, broken wifi, broken audio routing :/

[CLOSED][ROM][OFFICIAL][10.0][Dragon] Havoc-OS 3.8 [2020/08/18]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Havoc-OS for Nokia 6.1 Plus [Dragon]
What is this?
Havoc-OS 3.x is based on AOSP, inspired by Google Pixel.
Has a refined Material Design 2 UI by @SKULSHADY.
So many features that you probably won't find in any ROM.
All you can dream of and all you'll ever need.
Just flash and enjoy...
Based on Android 10.0
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Fingerprint
Known issues
All fixed for now . comment below if you face any bugs
Installation procedure
Note - Gapps already included & I don't recommend you people to flash any other custom kernels on this ROM untill Nokia release Q kernel sources. Because this ROM supports only stock kernel .
1. Boot in to twrp
2. Format data by typing yes
3. Reboot to bootloader
4. Now again boot in to twrp
5. Wipe everything
6. Now copy rom zip & twrp installer zip to phone
7. Flash the rom zip & twrp installer zip
8. Change to alternative slot
Example if you are on Slot a Change to slot b if you are on b change to a
9. Now reboot to recovery
10. Wipe all except system & vendor
11. Reboot system
Credits
* HavocOS & CO (For Source Code)
* All the authors in my git sources
* Nokia For Kernel Source
* Moderators (For Giving Freedom To Post Threads)
* My entire Nokia 6.1 Plus community Thank you all for your massive support Again
​
Download Rom
Download Official Twrp
Android OS version: 10.0.0_r41
Security patch level: August 2020
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/Havoc-OS
ROM Developer: Anushek Prasal
​

screenshots

Havoc-OS initial build is Up
For Nokia 6.1 Plus
Code - Dragon
Changelog
1. Initial Q beta build
2. Based on Q beta vendor.img
3. System blobs from 4040
4. October security patch
5. for Installation procedure go through installation section once

When I boot up TWRP there's no option to type "yes," just the swipe to allow modifications.

@Raghu varma, Please Make this rom for Nokia 6.1 (Pl2)
your work with 6.1 plus is very admirable and I'm currently using the PE rom you built for 6.1 . it would be great if you look into pl2 and build havoc for it

FatinX said:
@Raghu varma, Please Make this rom for Nokia 6.1 (Pl2)
your work with 6.1 plus is very admirable and I'm currently using the PE rom you built for 6.1 . it would be great if you look into pl2 and build havoc for it
Click to expand...
Click to collapse
Let's see

Wonderfull

Do not show USB link with PC. Unable to transmit data. Enter recovery mode, then transfer the data norm
ally

PvTuan said:
Do not show USB link with PC. Unable to transmit data. Enter recovery mode, then transfer the data normally
Click to expand...
Click to collapse
Did you flash Q kernel?

PvTuan said:
Do not show USB link with PC. Unable to transmit data. Enter recovery mode, then transfer the data norm
ally
Click to expand...
Click to collapse
check now. issue with your pc or your phone or your usb port so please dont post your personal phone stuff blindly please

attach microphone without sound, speakerphone still plays sound
---------- Post added at 06:13 AM ---------- Previous post was at 06:06 AM ----------
Raghu varma said:
check now. issue with your pc or your phone or your usb port so please dont post your personal phone stuff blindly please
Click to expand...
Click to collapse
rom before, data transfer is still normal so there is no reason pc has problem. and really sad. I experienced and had suggestions for the best rom. You said I was blindly. Sorry. i will not comment anymore.

PvTuan said:
attach microphone without sound, speakerphone still plays sound
---------- Post added at 06:13 AM ---------- Previous post was at 06:06 AM ----------
rom before, data transfer is still normal so there is no reason pc has problem. and really sad. I experienced and had suggestions for the best rom. You said I was blindly. Sorry. i will not comment anymore.
Click to expand...
Click to collapse
Check new build. For that micro phone stuff
Coming to this " i will not comment anymore "
Note before posting something related to bug check twice or thrice. If you blindly post something which is not related to bug. That actually makes me triggered for something without any valid reason. here not only you few people will do for spamming the board. Hope you got this point

volte not working
jio outgoing call{call ended error} and sms not working ,only incomming call working

In the today build, there's no double tap to wake?

Sorry, I try Headset Bluetooth is not working. There is solution?

New builds are up
changelog
* Based on latest havoc sources
* Comes with prebuilt vendor.img
* Linux version - 4.4.165
* November security patch
* Flash open-gapps-10.0-nano

Bootloader Unlocking
How do I unlock the bootloader on nokia 6.1 plus? There appears to be only one source, which claims to unlock the bootloader but, they charge money and I don't think it is a credible source. Can anyone help me?

nisarg13 said:
How do I unlock the bootloader on nokia 6.1 plus? There appears to be only one source, which claims to unlock the bootloader but, they charge money and I don't think it is a credible source. Can anyone help me?
Click to expand...
Click to collapse
Visit https://techmesto.com or https://hikaricalyx.com/product/hmd-nokia-bootloader-unlock/ to get information regarding bootloader unlock. Both of them charge money, and till Nokia allows official bootloader unlock, you only have those two options.

Changelog
15/12/2019
1. 3rd party apps calls fixed
2.Whatsapp video calls & 3rd party apps video calls fixed
3. Vendor blobs updated from Nokia 7.1 android Q stable build
4. Global network issues also fixed
5. Nuked OnePlus camera & shipped with stock Snapdragon camera.

Changelog
* shipped with Google apps
* No need to Flash Gapps from Now

[ROM][OFFICIAL][WEEKLY] crDroidAndroid-10-v.6.3 [VoLTE/VoWiFi][F2FS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP: non-sar-twrp, like last OrangeFox
gapps: opengapps
Magisk 20.3 or newer for root (after first boot) - (Download from here)
First time installation:
Download the ROM and GApps and transfer them to your device.
Boot to recovery (TWRP or OrangeFox recommended).
Wipe the System, Cache, and Data (if you migrate from MIUI format data required!).
Flash the ROM Zipfile.
Flash the GApps (optional, needed for e.g. Google Playstore to work).
Flash Magisk (optional).
Reboot your device.
Update installation:
Update can be dirty flashed over previoce cdDroid
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/chiron10/android_kernel_xiaomi_msm8998
Download:
ROM https://sourceforge.net/projects/crdroid/files/chiron/6.x/
Changelog: https://dl.nixadm.ru/crDroid-10-chiron/changelog_chiron.txt
Known issues:
* Android auto
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs

Thanks for great job. I'll test it later.

ROM has bug with Networking Setting crash now, i will fix it today and reply.

Sir, can you please tell me why custom roms android 10 has mic issues like whatsapp and recorder app barely record voice I have to put mic in front of me to record voice. Please look into it.

azzammalik said:
Sir, can you please tell me why custom roms android 10 has mic issues like whatsapp and recorder app barely record voice I have to put mic in front of me to record voice. Please look into it.
Click to expand...
Click to collapse
Well i think the problem is with vendor audio configuration @lightvortex has made a dedicated zip for it might help u:silly:

Sinchanwa said:
Well i think the problem is with vendor audio configuration @lightvortex has made a dedicated zip for it might help u:silly:
Click to expand...
Click to collapse
Share link of that zip file.
Thanks a lot

azzammalik said:
Share link of that zip file.
Thanks a lot
Click to expand...
Click to collapse
Here it is
https://www.androidfilehost.com/?fid=4349826312261721335

The latest build is fully stable using for couple of days and no bug so far... Good work..

I find an issue that version 0222 can't set date&time. When I change date or time, it go back to 1972.3.14 always. Version 0218 has no this issue.

yyfvteuemfw said:
I find an issue that version 0222 can't set date&time. When I change date or time, it go back to 1972.3.14 always. Version 0218 has no this issue.
Click to expand...
Click to collapse
Why don't you use network provided time instead of manual setup??

Sinchanwa said:
Why don't you use network provided time instead of manual setup??
Click to expand...
Click to collapse
I have used network provided time, the date&time also go back to 1972. So I use back to version 0218.

New build: crDroid-10.0-v6.3 02/26
Download: https://dl.nixadm.ru/crDroid-10-chiron/crDroidAndroid-10.0-20200226-chiron-v6.3.zip
Mirror: https://mega.nz/#!LQ0SmQrb!iO15DBDH-eQmdh120oQcwDZYpzVrQcK13oHQB9keIGE
Changes:
- Rebased on sbwml aosp tree:
- Added Advenced settings with sweep2sleep, spectrum profiles, KCAL, USB3.0 FastChange, Dirac (MiSound Enchaner).
- Kernel,vendor thanks to sbwml
Update: Better to update from previoce version with wipe system, vendor. Than install rom, gapps, magisk and reboot after all.

Can i use vipe4android in this rom? It is working?

Thanks for this good rom. It's stable for what i use it for. Should i find any bugs i'll post.
Too bad you don't see customization of QS background blur like we had on android 8. Loved that feature.
I know Havoc just implemented a basic tweak just now. Hope to see this back in roms.

Nice work
Thanks a lot

Version 0226 works perfect. There isn't date problem. Thanks man.

easily the most stable and bug free Rom.
everyone should try this Rom.
and for that mic problem which I was facing on all Q roms was because of Google app. I disabled Google app and mic is working like it suppose to work.
anyone here help me because I need Google assistant

Flashed the latest rom and I have no audio during phone calls. I tried a few different dialers with the same result. I have audio only via speakerphone. Microphone appears to be working fine. Also when installing vipe4android, system would not reboot. It just hangs. Had to reinstall Rom and GApps.

john707747 said:
Flashed the latest rom and I have no audio during phone calls. I tried a few different dialers with the same result. I have audio only via speakerphone. Microphone appears to be working fine. Also when installing vipe4android, system would not reboot. It just hangs. Had to reinstall Rom and GApps.
Click to expand...
Click to collapse
For mic problem flash this file
https://www.androidfilehost.com/?fid=4349826312261721335
And for viper use the canary magisk 20.4 system will boot even after that if driver installation problem is faced then in root directory
Vendor>etc> audio effect.conf
Change above file to " audio effect.conf.bak"
Then install the drivers
Try this and let me know if it is solved

john707747 said:
Flashed the latest rom and I have no audio during phone calls. I tried a few different dialers with the same result. I have audio only via speakerphone. Microphone appears to be working fine. Also when installing vipe4android, system would not reboot. It just hangs. Had to reinstall Rom and GApps.
Click to expand...
Click to collapse
That mic fix zip from what I recall is for VoIP .. I may be wrong about that but seems like I remember it on havoc thread a while back and it was for VoIP in call audio.. I lost my I'm call audio sound after flashing Havoc about 2 months ago. I tried EverYthInG and (mic fix zip didn't work for me) last night I wiped good and installed latest havoc from the telegram group, chiron aosp, and I again installed latest firmware via TWRP and I let it encrypt instead of keeping encryption disabled and hallelujah I have in call audio again!!! [emoji50] Just figured I'd share that since I had the problem too... Maybe our Havoc dev added a fix. He said he was going to look into it when it first happened to me and another user few months ago .. I haven't checked the change log in a while but my sound issue is gone on calls. [emoji869]
Sent from my [device_name] using XDA-Developers Legacy app

[ROM][OFFICIAL][11] crDroid v7.11 for Samsung Galaxy S10E/S10/S10+

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation requirements:
Make sure you are on any Q firmware
Q TWRP (by corsicanu) Make sure to follow the instructions here carefully.
Recommended NikGapps R (optional) (Download from here)
Magisk (optional) - (Read here for installing)
Installation:
If you are coming from Stock Firmware and have encryption enabled, format DATA
Wipe CACHE, DALVIK/ART CACHE and SYSTEM.
Flash crDroid 7.x zip
If you want to have GApps flash them right after flashing the ROM before first boot.
Sources:
ROM: [url]https://github.com/crdroidandroid[/URL]
Kernel: Kernel Source
Download:
Download for S10e
Download for S10
Download for S10+
Working and Known issues:
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- GPS
- Cameras (All of them)
- HWcomposer (HWC)
- Signal indicator
- Double tap to wake
- Wireless PowerShare
Not Working
- VoLTE and VoWiFi will not be implemented (for now) as they heavily depend on samsungs framework
Visit official website @ crDroid.net
ExpressLuke 9820 Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Donate to ExpressLuke

Changelog :
7.1 View changelog
7.2 View changelog
7.4 View changelog
7.5 View changelog
Current changelog View changelog
Detailed installation procedure :
If you are coming from Stock Firmware and have encryption enabled, format DATA
Wipe CACHE, DALVIK/ART CACHE and SYSTEM.
Flash crDroid 7.x zip
Flash nick gapps basic
Reboot system
First boot
Flash magisk image from Ivan'slink (select flash image in twrp and flash. img file to "boot")
Reboot system
Open magisk and follow the wizard
Hit the thx button and donate if you can
Important notes :
MAGISK : never update magisk when the app asks you to. Instead wait for Ivan to upload the new boot image
ONEUI3: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power.
FAQ :
Q: My device is in bootloop, I can't acces download mode or recovery, no combo works, how do I get out ?
A: You can try following:
- Plug your phone in the PC with the USB cable. Then press/hold Bixby + Volume Down and hopefully it will boot to download-mode.
Otherwise try (still plugged in) force shutdown/restart by pressing/ holding Volume Down + Power - as soon as the screen turns off shift to pressing/ holding Bixby + Volume Down for download-mode. Try it at few times as its all about timing.
- If still no luck, unplug your phone and let the battery run out. Then press/hold Bixby + Volume Down and plug in to get to download-mode. This may take some time as the phone needs to recharge a little before it reacts.
- Once in download-mode flash your software before the update via Odin - I would use Home_CSC first trying to save your data.
Q: I lost root after proceeding with latest OTA update. What do I do?
A: flash magisk boot image again just like you did on the first flash (see procedure above).
Q: How do I update magisk ?
A: Wait for Ivan to upload the new boot image here then flash according to the detailed steps above
Q: Can I update Magisk from within the Magisk manager app or by flashing updated magisk .zip ?
A: No. Doing this would create a bootloop, Instead wait for Ivan to upload the new boot image here
Q: Dialer not appearing, no possibility to pick up calls or hang up
A: not related to rom (it's a nick gapps issue)
There's a fix : flash nick gapps "basic" and no other flavor

mastawindu said:
Thx for the ROM, can you confirm the android version?
Click to expand...
Click to collapse
The number 11 in the thread title stands for the Android version.
@turbolukex5 thanks a lot for this rom!

Can i just update from Crdroid 10 to 11 by flashing the rom and new gapps and magisk or do i need to to do a full wipe?

catormeme said:
Can i just update from Crdroid 10 to 11 by flashing the rom and new gapps and magisk or do i need to to do a full wipe?
Click to expand...
Click to collapse
+1
Sent from my [device_name] using XDA-Developers Legacy app

catormeme said:
Can i just update from Crdroid 10 to 11 by flashing the rom and new gapps and magisk or do i need to to do a full wipe?
Click to expand...
Click to collapse
I would recommend a clean flash. I don't know if it's possible to update - and it may cause unknown issues if you do.

HI @turbolukex5,
Thank you for the ROM, nice to see some 11 custom flavor, busy testing, so far looking good! Thank you very much, also to Ivan.
Good going guys!

turbolukex5 said:
I would recommend a clean flash. I don't know if it's possible to update - and it may cause unknown issues if you do.
Click to expand...
Click to collapse
I tried dirty flash nut no luck! Now i wiped and everything is ok...
Happy flashing
Sent from my [device_name] using XDA-Developers Legacy app

did anyone get magisk to work?

catormeme said:
did anyone get magisk to work?
Click to expand...
Click to collapse
Will not install , but phone is rooted [emoji848]
Sent from my [device_name] using XDA-Developers Legacy app

It's working great for me thanks for this. The issues I had were when using the stock gapps package. If it overwrites the one included in the rom the phone won't work. Wiping and flashing rom with basic Niki gapps resolved the issue though in case anyone else gets that issue.

Running great so far! Only one bug:
When always on display is turned off, unlocking the devices takes an extra second. When the always on display is on, it unlocked instant. Hope that can be fixed.
Somehow it's fixed now, I don't know what caused it, changed a lot of settings

Thank you for this great rom @turbolukex5 no bugs so far working great. Is there any way to change fingerprint icon in your rom?

FreeRunner2017 said:
Thank you for this great rom @turbolukex5 no bugs so far working great. Is there any way to change fingerprint icon in your rom?
Click to expand...
Click to collapse
It's possible you may be able to use this app with Magisk root to change your fingerprint icon. By default you can't change it in the rom.
https://pixeldrain.com/u/93zUJ6PG

turbolukex5 said:
It's possible you may be able to use this app with Magisk root to change your fingerprint icon. By default you can't change it in the rom.
https://pixeldrain.com/u/93zUJ6PG
Click to expand...
Click to collapse
Thanks @turbolukex5, how do I install this?

FreeRunner2017 said:
Thanks @turbolukex5, how do I install this?
Click to expand...
Click to collapse
Install magisk via instructions in original post and then install the apk and launch it from the link

hello super rom! i have a problem with my sd card with this rom! any idea please?

Juni3769 said:
hello super rom! i have a problem with my sd card with this rom! any idea please?
Click to expand...
Click to collapse
Next build will have this resolved

J_Dutch said:
The number 11 in the thread title stands for the Android version.
@turbolukex5 thanks a lot for this rom!
Click to expand...
Click to collapse
I kinda know... Hence the question

turbolukex5 said:
Next build will have this resolved
Click to expand...
Click to collapse
okay thank you so much

Development [13][ROM][sGSI][CWAI+][Exynos2200] Pixel Experience Plus

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixel Experience Plus "s"GSI
DISCLAIMER
I am not to be held responsible for any damage that might come to your device while trying to install or using this rom. This is your own responsibility.
What is this?
Pixel Experience is an AOSP based ROM with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Their mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
What makes these builds different from other GSIs and especially, what makes it different from the already-existing PE GSI builds?
- Fixed Auto-Brightness
- Fixed the microphone in video recording by default
- Fixed Adaptive Refresh Rate
- "Fixed" the green tint in low-lit environments by enforcing 120Hz during those times
- AOD is enforced to use the lowest available refresh rate
- Added MIN/MAX Refresh Rate options within Phh Settings
- Reverted the QS look to the actual Pixel one
- S22-relevant settings in Phh Settings are enabled by default
What is working?
Everything not listed under broken things.
What is NOT working?
- WiFi Direct
- 5G
- VoLTE
Known issues
- proximity sensor (it works - the screen will lock if you put the phone near your face while in a call but you have to wake the phone yourself afterwards)
- WiFi Hotspot (it has been fixed in the latest release of Loki kernel)
- RIL signal occasionally misbehaves once after a couple reboots(keep toggling airplane mode until it goes back to normal, this is a general TD GSI issue ATM and you have to do this once per boot in the rare cases when it does occur)
- Video recording is capped at [email protected] (thank Samsung for this)
Instructions
If you're new to this, visit THIS LINK
For the front camera to work in Google Camera ports, it's advised to flash the CWAI firmware or newer.
Do keep in mind that with that firmware (or BVJA, which was before CWAI), Samsung added anti-rollback so you won't be able to downgrade to A12.
1. Extract the .xz file
2. Reboot into recovery
3. Perform a Factory Reset
4. Boot into fastboot (you need a patched recovery for this, follow THIS GUIDE
5.Flash the extracted image with fastboot: fastboot flash system image.img
6. Reboot
Download
Github
MEGA Mirror
Add-ons
LOKI KERNEL
GCam 8.4 port by Shamim
1. Download the apk from HERE
2. Download the .xml config from HERE and copy it to /sdcard/SGCAM/XML (Thanks to Es Jot for the config)
3. Download the lib from HERE and copy it to /sdcard/SGCAM/LIB
4. Install the .apk, double-click between the shutter and gallery icons
5. Import the config
AGC Camera
1. Download the apk from HERE
2. Download the configuration from HERE
3. Install the apk
4. Import the config by choosing More Settings > Configs > Import
5. Go back to the camera view, press the top arrow and choose Load Config
Telegram
Samsung Galaxy S22 Exynos GSI Group
Translation
Help with project translation
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
kdrag0n
ponces​
Build author: Jeik
Source code: PixelExperience
Device source code: device_phh_treble
ROM developer: jhenrique09
Contributors: Pixel Experience Team, phhusson, AndyYan, eremitein, kdrag0n and ponces

thanks for your work！but i am wondering that does it work on snap？

It's nice, but mobile network keep disconnecting and Bluetooth audio don't work

yzuunk said:
It's nice, but mobile network keep disconnecting and Bluetooth audio don't work
Click to expand...
Click to collapse
okay，can this problem be fixed？i want，to use gsi on my s22 snap daily

yzuunk said:
It's nice, but mobile network keep disconnecting and Bluetooth audio don't work
Click to expand...
Click to collapse

New build up.
Changes:
- BT audio should now work fine
For those on the previous build and with the mentioned issue, toggle the following option within Phh Settings > Misc

Jeik said:
New build up.
Changes:
- BT audio should now work fine
For those on the previous build and with the mentioned issue, toggle the following option within Phh Settings > Misc
View attachment 5895743
Click to expand...
Click to collapse
hey，nice to see you，does this rom work on snap s22?

Loving this rom

Daniel Dumile said:
Loving this rom
Click to expand...
Click to collapse
I love this very much,just do not know whether it works on my snap s22

huahuaa said:
hey，nice to see you，does this rom work on snap s22?
Click to expand...
Click to collapse
It will maybe boot but the fixes are pretty much exclusive to the Exynos variant of the S22, meaning you'll have the exact same bugs as you'd have with any other GSI if you flashed it on your SD variant.
In any case, I have absolutely no plans to try making it work on SD variants.

What a shame, but thanks to developers like you for their hard work, I just hope someone can do it, I can help test the system related issues, and I can also provide some donations, though not much

Jeik said:
It will maybe boot but the fixes are pretty much exclusive to the Exynos variant of the S22, meaning you'll have the exact same bugs as you'd have with any other GSI if you flashed it on your SD variant.
In any case, I have absolutely no plans to try making it work on SD variants.
Click to expand...
Click to collapse
What a shame, but thanks to developers like you for their hard work, I just hope someone can do it, I can help test the system related issues, and I can also provide some donations, though not much

How would one root with magisk ?

Hello !
I installed via Odin the Stock Rom "S901BXXS4CWD3_S901BOXM4CWCH_EUX" (latest for Europe).
Patch Recovery.img and install IMG via fastboot, and I have a bootloop, any idea?

sHnouL said:
Hello !
I installed via Odin the Stock Rom "S901BXXS4CWD3_S901BOXM4CWCH_EUX" (latest for Europe).
Patch Recovery.img and install IMG via fastboot, and I have a bootloop, any idea?
Click to expand...
Click to collapse
ya Must after Flash Recovery at First start Boot in Recovery so ya can Wipe Userdata and then ya can Start the System!!! Hope It helps, when not ya must Flash StockROM and Try Again!!And when ya Patch Recovery IMG ya must start Recovery Mode to have Root Rights in System, and than ya have no Recovery!!!

Pixel Experience Team, phhusson, AndyYan, eremitein, kdrag0n and ponces Nice work Guys!!! when ya have the Time can ya Build a LineageOS 20 GSI? or is anybody so nice a Beginner in Szenario Building GSI/ROMs the manifest*.xml make Public than i have Found nothing!!! So the Tutorial on XDA is uncomplete to Build a ROM!!!

New build up.
Changes:
- May security patch
- latest TrebleDroid changes
- offline charging seems to work now (confirmed on base S22, CWAI fw, latest Loki kernel)