Help with semibrick - Redmi Note 8 Questions & Answers

Hi, I have a problem, yesterday I unlocked the bootloader and installed the recovery, formatted dalvik cache, system, data and something else, when I finish I tell it to restart in recovery but when I start I get a message that says:
The system has been destroyed and from there it does not happen, some know the solution of how to repair Note 8.
Thanks and best regards.
PS I tried the command.
fastboot continue and nothing at all.
I have reinstalled the recovery and nothing.
Problem solved.
Edit / Delete Message

Related

problem after s-off

hi , i used thi guide http://forum.xda-developers.com/showthread.php?t=928160 for use the s-off in my desire z , this guide is good now the device is s-off but when i turn on the phone remains blocked in bootscreen htc... I throw the phone or can I save it? pls help me thanks
pls help meee
Can you boot to bootloader? With the phone off, hold vol-down while pressing power on. If you see a menu screen show up, navigate to Recovery. Tell us how far you can go.
yes work bootloader and recovery but goes wrong the recovery some problem whit command but in the option of recovery are wipe cache wipe data (already tested) and i try hard reset but nothig however thank you for your reply and scuse me for my english
Rosemberg91 said:
yes work bootloader and recovery but goes wrong the recovery some problem whit command but in the option of recovery are wipe cache wipe data (already tested) and i try hard reset but nothig however thank you for your reply and scuse me for my english
Click to expand...
Click to collapse
So you wiped, then installed a rom zip, then tried reboot but it gets stuck at the white HTC screen? Do you see any error messages in the recovery menu?
It's possible your emmc chip went bad. Follow the steps here that start with "To be sure that you really are effected by the emmc issue..."
i just try hard reset , wipe cache, data but nothing... when i enter in recovery appears a error message : E: can't open /cache/recovery/command ...
I would try to put the original rom whit adb but in the cmd the device appears connect but offline ...
Sounds like another busted emmc chip story that's it when I get my replacement I think I'm gonna be too scared to root it
Sent from my HTC Vision using XDA Premium App

Please help!! my phone died!!!!

Hi, I need help with my SGS2 . I tried to install the miui rom and it was the first time I tried to flash a arom. I just followed the intsurctions on the following link http://androidflip.com/how-to-insta...-3-4-on-samsung-galaxy-s2-step-by-step-guide/
and I tought everything went soomthly but after I rebooted the device first it was like the miui logo on the screen and nothing happened and then I tried to reboot it then my pc did not recognize the phone when I connected it to the pc and then I took the battery off and now when start the damn phone the triangle picture comes and then just black screen nothing happens. I did make a full recovery with the rom manager before and now my question is did I just kill the phone or can I do something?
Pls help me.
There's tons of threads about your problem.
Put it in download mode and install a stock ROM using Odin. That should get you going again.
You should have CWM, so turn phone off, press volup+home+power, goto Mounts&Storage, Mount USB Storage, and connect phone to PC. Copy over whatever ROM you want, then in CWM menu clear data/factory reset, clear cache, goto advanced, clear dalvik cache, goto install zip from sdcard, choose the zip ROM file, and install it. Reboot, and you should be fine.
thank you so much guys, it helped. It is working now. I will not panic like this one next time. Once again thank you very much
Brgds
blackspp said:
There's tons of threads about your problem.
Put it in download mode and install a stock ROM using Odin. That should get you going again.
Click to expand...
Click to collapse
Good sir, I'm also new with this rooting and flashing stuff on Android. Would this method always guarantee that the phone firmware will be fixed under any circumstances? (aside from physical damage, of course)
m2smoe said:
You should have CWM, so turn phone off, press volup+home+power, goto Mounts&Storage, Mount USB Storage, and connect phone to PC. Copy over whatever ROM you want, then in CWM menu clear data/factory reset, clear cache, goto advanced, clear dalvik cache, goto install zip from sdcard, choose the zip ROM file, and install it. Reboot, and you should be fine.
Click to expand...
Click to collapse
Let me get this straight, so basically what you are saying is:
- Wipe all the ROM data from the phone
- Install a new ROM, since all the previous corrupt ROM data is cleared
But why clear cache and then clear dalvik cache? Just curious with the difference. (Yes, I haven't rooted mine yet, because I'm still learning slowly before plunging)
Oh also, since you mentioned that we should "clear data/factory reset", doesn't that mean the phone is back to the original stock ROM already, which means we have to root it again...?

[Q] HELP! Bricked my P600!!

Guys
really need some help here. Stupidly i decided i wanted to try my hand at installing clean rom,.
Firstly -
1. i rooted the device, and then used titanium backup to freeze some knox apps.
2. I didnt bother to put the stock recovery back on as i wanted to install clean ROM.
3. I followed the instructions i found on here to a tee - as below. They all worked perfectly.
4. I went through the install screens on CLEAN ROM - that all worked fine.
5. It ended with a screen back to TWRP and i hit reboot.
6. Not the device just gets stuck at the glowing samsung logo.
7. I can get back into TWRP but i have no idea what to do next. I have tried rebooting from TWRP, both system and power, but no luck. The device powers down, and comes back up but remains stuck on the glowing samsung logo.
What can i do?
these were the instructions i followed. Any help much appreciated, and i will chuck a couple of quid towards someone that can help.
3.
Download latest CleanRom and copy it to your SD-Card
4. ODIN
- Run Odin as administrator
- untick -Auto Reboot-
- Click -PDA- (in latest version it's -AP-) and choose your TWRP version
- Now turn off your device and restart it by holding down Power+Volume Down. Proceed with Volume Up to enter DownloadMode
- now connect your device to your PC using USB
- Device drivers should get installed if not already done
- check the Message box in Odin. There should be an "Added!!"
- There should be nothing checked but F. Reset Time
- Press -Start-
- when finished there should be a "RES OK !!" in the Message box
- TRWP is now flashed to your device
4.1.
Now restart your device manually by holding down Power+Volume Up. As soon as you see the Samsung Logo, wait a second and release the Powerbutton but keep holding Volume Up until TWRP is loaded.
5. TWRP
In TRWP
- click Wipe
- advanced wipe and check:
Dalvik, Cache, Data, Internal Storage (should be enough), System
- do NOT tick external SD. You don't want to get it wiped.
- Swipe to Wipe
Now back to Mainmenu
- click Install
- choose your desired ROM
- Swipe to Confirm Flash
- Follow Rom's Installshield and you should be good
Have fun and good luck
If you can get back to TWRP, then wipe data , cache & dalvik, then re-flash clean rom again.
If problem still persists then flash a stock rom via odin.
still no joy
I can wipe cache, system, data, but when i try to include dalvik cache i get a "Failed". the message in the screen says E: unable to mount '/cache
rakeshm01 said:
I can wipe cache, system, data, but when i try to include dalvik cache i get a "Failed". the message in the screen says E: unable to mount '/cache
Click to expand...
Click to collapse
You shouldn`t wipe system . data , cache & dalvik was the requested options.
Now since you wiped system, your only choice is to download a stock firmware from sammobile, enter download mode power+volume down , then volume up, & flash via odin .
lsherif said:
You shouldn`t wipe system . data , cache & dalvik was the requested options.
Now since you wiped system, your only choice is to download a stock firmware from sammobile, enter download mode power+volume down , then volume up, & flash via odin .
Click to expand...
Click to collapse
Hi thanks all – i think the problem was the boot loop issue. I wiped cache, dalvik cache, system, and data, one by one, and then reinstalled clean rom and it seemed to push it through. Thanks for the support though!
Almost, if it powers on and you're even getting in to recovery, bricked is not the proper term.
Bricked = no power, dead beyond repair.
All you had was a software issue.
and if twrp does not find sd card ?
then what ?..

[Q] HTC One(M8) everything still exist after hard reset

Hi,
I have serious problem with my HTC ONE M8.
my One M8 has Android 4.4.3 version 401 variant.
1. I have deleted everything from File Manager, but when I restart my phone everything still exist in Gallery.
2. I have done Backup & Reset->Reset Phone->Erase All Data->Ok-> Rebooting Mobile, but no changes after reboot.
3. I have Hard reset with key combination VolumeDown+Power->>>Factory Reset, but no luck.
4. I have wiped everything with key combination VolumeUp+Power->> Wipe Data/Factory Reset + Wipe cache partition, nothing happened.
5. I tried to unlock bootloader with HTCDev, but still Locked.:crying:
6. I tried to update with RUU file first time its goes to RUU Mode, but second time its goes to Normal Mode and RUU Update is timed out.:crying:
7. I erased cache with ADB command "fastboot erase cache" but same situation. :crying:
:crying: I have tried everything to farmat, hard reset, update but ?????:crying:
HELP HELP HELP PLEASE..............
THANKS IN ADVANCE........................

Error «Encryption was interrupted and cannot be complete»

Hi Guys! I have a problem, and i really don't know how can i fix it.
My phone boots normally, but when boot finish this error appear in the screen:
«Encryption was interrupted and can't be completed. Phone data cannot be used anymore.
To continue using your phone, you must restore factory settings. After the restoration, you can restore data backed up in your Google Account to your phone»
There is a "Reset Phone" button but if i push it nothing happen.
I have tried to clear data/cache in recovery but nothing changed, I have tried to install a new ROM (i tried a lot of ROMS) but when it arrive to 50% more or less installation fails.
I have tried this guide oppoforums.com/threads/guide-how-to-recover-your-bricked-find-7-7a.23067/ but it cannot work (Image Attachment)
Also FASTBOOT can't work. (For exemple: if i try to flash recovery it fails remote: failed to flash recovery / erase userdata / cache)
I really don't know where can i also looking
Help me please!
Anyone?
I'm having the same problem....
Restoring an old backup woth TWRP results in the same error.....
hi guys this happened to me too,
luckily I had twrp 2.8.6.0 flashed for recovery.
think you should still be able to get into fastboot if you do a battery pull
then poweron with the powerbutton and volume up till you see the oppo man icon.
then you should be able to flash your recovery with the latest twrp.
if you seen the penquin then this may not work for you. As i have not done a hard recovery before so i dont know if it would work.
I saw the oppo man so i was able to fix it by:
booting into twrp recovery,
i selected wipe --> advanced and there was an additional option to do a wipe for encrypted volumes and i selected all partitions to be wiped
then i installed i had downloaded on my SD card, it was ColorOS 2.0.8i i believed and it fixed it.
sorry if i am a bit grey about the details i did it a while ago so.
Actually found this in the cm12.1 nighlies thread
http://forum.xda-developers.com/showpost.php?p=58304054&postcount=14
issue is possibly due to unified partitions

Categories

Resources