Develop Bugs

[OFFICIAL][RECOVERY] TWRP 3.2.1-0 for Nubia Z17mini

Team Win Recovery Project 3.x, or TWRP3.x for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Your warranty is now void.
We are not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Recovery
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you.
Features:
All function in a normal TWRP
Multi-language support
USB OTG
Decrypt /data
Instructions for easy installion tool :
Boot your phone into bootloader mode by pressing power and volume down button at the same time, then press volume down button again to stop auto reboot timer.
Open the tool and choose the option whatever you want, install and boot or boot only . The tool is doing everything fully automatically.
Drivers are going to install automatically if it didn't install on your pc.
Bootloader is going to unlock automatically.
Then you phone is going to boot into TWRP.
Source Code:
android_device_nubia_nx569j
Download:
Nubia Z17 Mini TWRP 3.2.1-0 Installer
XDA:DevDB Information
[OFFICIAL][Recovery] TWRP 3.2.1-0 for Nubia Z17mini, Recovery for the ZTE Nubia Z17 Mini
Contributors
asderdd, Orochixxx
Recovery OS Version: 7.x Nougat
Recovery Kernel: Linux 3.10.x
Recovery Firmware Required: Stock EN 2.01+
Version Information
Status: Stable
Current Stable Version: 3.2.1-0
Stable Release Date: 2018-05-08
Created 2018-05-08
Last Updated 2018-05-08

Thanks :highfive:

Are u cola? Are u disco?

Thanks bro Röhaehöhey!!!

.
Orochixxx said:
Thanks bro Röhaehöhey!!!
Click to expand...
Click to collapse
Waovvv röhahaheyy

Can you increase the functionality of the root device

Superman.
Hemen indiriyorum...
NX569J cihazımdan Tapatalk kullanılarak gönderildi

Hi dears,
Receive thsi Mesage, when I try to unlock:
Please connect your device to pc while it's in bootloader mode..
Device has connected on bootloader mode!
Checking drivers..
Device drivers installed!
Connected to the device!
Bootloader cannot unlock
Please update your rom to lastest version via ota and try again.
Press any key to exit . . .
I install ROM version UI 5 V2.13, is the last version, or not?
Anyone can help me, pls???
There is a another way to install TWRP ?

Dears,
Think that is important to warning:
Recovery Firmware Required: Stock EN 2.01+
Does not work with Original chinese ROM.
Up in the system req.

Thanks Perfect Job

Is it a "real OFFICIAL"-version with long-term support?
It is not listet on the official TWRP website!
https://twrp.me/Devices/Nubia/
----------
but it is still a very nice one-click tool, working goog

Will this also work for my Nubia Z18 Mini?
I really need to install GApps!

I am about to buy ZTE nubia Z18 mini.
1. is the bootloader unlocked by default on Z18 mini, like it was on the Z17 mini?
2. is there a TWRP version for z18 mini?
Sorry for the off topic question, I juts hope experienced people may know this sort of information. Cheers.

dewois said:
Is it a "real OFFICIAL"-version with long-term support?
It is not listet on the official TWRP website!
https://twrp.me/Devices/Nubia/
----------
but it is still a very nice one-click tool, working goog
Click to expand...
Click to collapse
Well noted!
It really NOT listed on the [OFFICIAL] TWRP website, fear.
Still stoped on 3.2.1-0, there is no new version to [nx569j/h] on https://twrp.me/site/update/2018/08/06/twrp-3.2.3-0-released.html
Hope it does not contain any malicious code, soon be listed as an official and recognized version.
asderdd,
Please talk to TWRP staff to include your version on the page...

My Mini M8Sii is stuck in this twrp, reboot boots straight back in twrp. But how to control it? Remote doesnt work, a mouse wont work either. I want my player out of twrp.
Thanx in advance

Never mind, got it to flash another rom, and its working now :good:

Btw: 3.4 is out!
https://dl.twrp.me/nx569j/

[RECOVERY][warsaw][3.4.0-0]TWRP for Huawei P10 Lite

TWRP for Huawei P10 Lite
Working
Code:
[CENTER]* Touchscreen
* Adb
* Backup
* Wipe
* File manager
* MTP
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
Installation
Code:
[CENTER]* put you phone in fastboot mode and type
"fastboot flash recovery_ramdisk <grab_here_the_img>"
* reboot
[/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Pie/TWRP/"]TWRP[/URL]
[/CENTER]
Credits:
@Pretoriano80
@haky 86
@OldDroid
@DarkDroidDev
Please support my work, it's very important! Thanks
DONATIONS
Regards !​

Reserved

sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!

Great .. after testing on WAS-LX1A
i dunno why you're telling that mtp/backups doesn't work !
For me Backups work and internal storage / SD shown on windows normally
*Edit
Can't copy files
Thanks for your precious work .

-CALIBAN666- said:
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Click to expand...
Click to collapse
I've installed RR and Bootleggers ROM's on P8 Lite 2017 and it works. All ROM's and Recoveries for hi6250 based devices (Kirin 655, 658, 659) will work on each other.

Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?

GizmoTheGreen said:
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
Click to expand...
Click to collapse
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.

NeoPreacher said:
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
Click to expand...
Click to collapse
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;

GizmoTheGreen said:
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
Click to expand...
Click to collapse
yeah, this is going to happen soon !

@DarkJoker360
How could I know if my device is hi6250 or warsaw?

chiduja said:
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
Click to expand...
Click to collapse
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.

NeoPreacher said:
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
Click to expand...
Click to collapse
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.

chiduja said:
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
Click to expand...
Click to collapse
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.

NeoPreacher said:
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
Click to expand...
Click to collapse
The first time that I tried to do the flashing I had to put my patron, but I've never did the decrypt, It's ****ty I tried a lot of "Solutions" but It doesn't worked.

ok alright the problembis that i tried to use "warsaw" codename instead of "hi6250" but it is not working for some reason, it is a flashing issue, and probably i have to revert my changes...
EDIT: before reverting my changes I wanted to try with LineageOS 16.0

Hi
Is there a prerequisite to use this recovery, I'm still using twrp 3.1.1-2 made by KingofMezi so still emui 5.0 but that recovery doesn't allow data backup because of the encryption. So I tried to flash yours it was ok in the command window but when I try to boot in recovery I get an error. I tried flashing again, downloading again and flashing but still doesn't work any idea?
I didn't want to upgrade the rom without a proper backup but none of the recoveries have been working.

Hi! Does someone try to install on a p20 lite?

@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0

diy_solomun said:
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
Click to expand...
Click to collapse
I asked myself the same question and tried to flash twrp on android 7.0 but it didn't work. I tried to upgrade to android 8 via erecovery but it failed. So i managed to upgrade it to B366 Emui 8 with dload (https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946) but i still could not flash twrp. So i entered erecovery mode again (press power, volume up & down for a few seconds) and with android 8 i could recover it to the official 8.0.0.376. After this step the flashing of twrp was finally successful. Thanks to darkjoker!!

New TWRP update is up !
Changelog
Code:
[CENTER]* Synced with latest TWRP source code
* FIxed flashing errors[/CENTER]
DONATIONS
Check OP for more info and download !​

[RECOVERY][3.4.0-10][ginkgo/willow]Off/Unof TWRP for Xiaomi Redmi Note 8/8T (Stable)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Backups works
- Flash Rom works
- F2FS support
- Fastboot boot command support
- Compatibility.zip error fixed
- Willow fully supported
- Android 11 Decryption
Download:
TWRP 3.4.0-10 Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial by mauronofrio
TWRP 3.3.1-10 Unofficial by mauronofrio / Sourceforge
TWRP 3.3.1-9 Unofficial by mauronofrio / Mediafire
TWRP 3.3.1-8 Unofficial by mauronofrio
TWRP Official Builds
TWRP 3.3.1-5 Unofficial by mauronofrio
TWRP 3.3.1-2 Unofficial by mauronofrio
To Flash the TWRP:
if it's the first time you flash the TWRP or you are getting problems of TWRP lost or device doesn't boot after flashed magisk or something else you need to flash a script to patch your vbmeta:
VBMETA PATCHER
To flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
Flash the VBMETA PATCHER and reboot.
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_ginkgo
Using precompiled stock kernel
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
Thanks to @ash4win for the first test
Created 2019-11-04

This is not tested, before test it make a backup and please report what is working and what is not working

Thanks ! I hope come quickly other improvements.

Flashed it and it booted successfully.

bhaiwala said:
Flashed it and it booted successfully.
Click to expand...
Click to collapse
Decryption is working?

Decrypted by entering locksreen pin

bhaiwala said:
Decrypted by entering locksreen pin
Click to expand...
Click to collapse
So seems all is working...

Gsis working?

good job！goodjob ！
and how to use f2fs for redmi note8

I have tested the recovery in my device. And it's working good. Thanks .

ridershahmir said:
Gsis working?
Click to expand...
Click to collapse
They should work
wsdyleon said:
good job！goodjob ！
and how to use f2fs for redmi note8
Click to expand...
Click to collapse
f2fs is already in use on note 8 for userdata

working super fine
nice work

cRaZyzMaN said:
working super fine
nice work
Click to expand...
Click to collapse
On factory Global rom?
Will it works on China rom flashed into Global?

Zozomon said:
On factory Global rom?
Will it works on China rom flashed into Global?
Click to expand...
Click to collapse
Try it.

Zozomon said:
On factory Global rom?
Will it works on China rom flashed into Global?
Click to expand...
Click to collapse
that i dont know

I install this twrp, and working perfectly thanks again

please say the type of ROM (China or global) where it was installed, thanks

miguelm18 said:
please say the type of ROM (China or global) where it was installed, thanks
Click to expand...
Click to collapse
global version

installed it on my phone with stable rom, sadly it not stays permanently. after reboot stock recovery appeared

SKAssi said:
installed it on my phone with stable rom, sadly it not stays permanently. after reboot stock recovery appeared
Click to expand...
Click to collapse
Flash magisk to keep it

[ROM][10][OFFICIAL] LineageOS 17.1 for Mi MIX 2

Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on chiron
Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose ARM64 as Platform and 10.0 as Android, use the Variant you want. Recommended nano package)
Required TWRP recovery
twrp-3.3.1-chiron-20190608.img
Changelog:
Changes for chiron
Bug reports:
How to submit a bug report
LineageOS GitLab
Donate to support development:
Donate via PayPal to mikeioannina
Donate via PayPal to NeoArian
Donate via PayPal to LineageOS
XDA:DevDB Information
Official LineageOS 17.1 for Mi MIX 2, ROM for the Xiaomi Mi Mix 2
Contributors
mikeioannina, NeoArian
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI Stable V11.0.6.0
Based On: LineageOS
Version Information
Status: Nightly
Created 2020-04-23
Last Updated 2020-04-23

No miui camera for this one?

I can't seem to update to the newest nightly
Code:
lineage-17.1-20200424-nightly-chiron-signed.zip
. The phone seems to be updating, (tried from within the settings and adb sideload) but when I check the updater app it says that the update is ready to install and the current version is from April 23rd.
Yea, there is something weird happening with the latest nightly. I did a clean install (factory reset,format data/system and all that stuff) and I still get April 23 as the build I have installed.

thank you so0 much

gaabrysz said:
I can't seem to update to the newest nightly
Code:
lineage-17.1-20200424-nightly-chiron-signed.zip
. The phone seems to be updating, (tried from within the settings and adb sideload) but when I check the updater app it says that the update is ready to install and the current version is from April 23rd.
Yea, there is something weird happening with the latest nightly. I did a clean install (factory reset,format data/system and all that stuff) and I still get April 23 as the build I have installed.
Click to expand...
Click to collapse
Same here.

Root method?

jimmys121979 said:
Root method?
Click to expand...
Click to collapse
Latest Magisk works fine.

I am enjoying this rom since 20 days.My phone is without root.i am missing some features.....
1 Auto call recording
2 Network videocall is not working

gaabrysz said:
I can't seem to update to the newest nightly
Code:
lineage-17.1-20200424-nightly-chiron-signed.zip
. The phone seems to be updating, (tried from within the settings and adb sideload) but when I check the updater app it says that the update is ready to install and the current version is from April 23rd.
Yea, there is something weird happening with the latest nightly. I did a clean install (factory reset,format data/system and all that stuff) and I still get April 23 as the build I have installed.
Click to expand...
Click to collapse
Use official TWRP that seemed to fix the issue for me

Mihail_Russian said:
Use official TWRP that seemed to fix the issue for me
Click to expand...
Click to collapse
Is your phone showing 24 th april as installed.my phone is showing 23 rd april after installing the 24 th build.

@mikeioannina Thank you very much for all your efforts!

I have version 17.1 installed, with the latest update. I installed it with the MIUI that I had with version 16.0 and the installation was with the Lineageos recovery. When I try to install Magisk, 78% doesn't follow and consequently it doesn't install.
If I install the TWRP recovery, "I don't lose anything?"? I have to install MIUI 11 ?. ? What is the advantage of Lineage recovery over TWRP?

fcaminab said:
I have version 17.1 installed, with the latest update. I installed it with the MIUI that I had with version 16.0 and the installation was with the Lineageos recovery. When I try to install Magisk, 78% doesn't follow and consequently it doesn't install.
If I install the TWRP recovery, "I don't lose anything?"? I have to install MIUI 11 ?. ? What is the advantage of Lineage recovery over TWRP?
Click to expand...
Click to collapse
Twrp recovery has all features of lineage recovery with so much extra goodies.

? Only?

fcaminab said:
? Only?
Click to expand...
Click to collapse
What is meant by your post ?

There will be some difference when Lineageos has prepared a recovery existing TWRP, that is my question:? What is the difference between the two recovery ?.
I don't think Lineage bothers to prepare something if there are no differences

Did a dirty upgrade install from 16, and stuck on the boot animation.
Then I did a wipe and install, but still stuck on the boot animation.
Anyone having the same issue?

markwithk said:
Did a dirty upgrade install from 16, and stuck on the boot animation.
Then I did a wipe and install, but still stuck on the boot animation.
Anyone having the same issue?
Click to expand...
Click to collapse
Hello, I'm on the same boat. I tried dirty flashing coming from LOS 16, then wipe and install but still stuck on boot animation.
I tried using the recommended TWRP and also Orange Fox, but same result.

glock24 said:
Hello, I'm on the same boat. I tried dirty flashing coming from LOS 16, then wipe and install but still stuck on boot animation.
I tried using the recommended TWRP and also Orange Fox, but same result.
Click to expand...
Click to collapse
Well, good to know I'm not alone. Did you also use the 20200426 build? I suspect the build is bad. Maybe try an earlier one?
I spent one night flashing LOS and failing, and then decided to try PE for the first time. It worked

fcaminab said:
There will be some difference when Lineageos has prepared a recovery existing TWRP, that is my question:? What is the difference between the two recovery ?.
I don't think Lineage bothers to prepare something if there are no differences
Click to expand...
Click to collapse
Very quick google search came back with this result: "Right now, Lineage Recovery is really only intended to be used on devices with Seamless Updates (aka A/B partitions) and, in that role, it is only intended to be embedded within the OS's normal Boot image."
You have posted this same question in a few threads now and only received the same answer each time, sir.
TWRP works just fine for our device and includes so much extra options compared to the lineage recovery.
Why not test them both out yourself? Find one you like that suits your needs.

LineageOS for Poco M3

If you look at the header and think is is already there ... sorry. But I think we should have a good chance to build it. It is a well supported SoC Snapdragon 622.
Some things that are required are available:
- bootload unlocking
- custom recovery (TWRP / OF)
- kernel sources (https://forum.xda-developers.com/t/xiaomi-has-released-poco-m3-kernel.4205133/)
With that it should be possible to cook something:
[GUIDE] How to build an unsupported rom using sources from other roms
Hello all and welcome to my first how-to guide I began the process of learning about ROM about 4 months ago (so excuse this post if there are any inaccuracies and please feel free to correct me in the comments - I will absolutely update this...
forum.xda-developers.com
How to Build Lineageos rom for any android device Easily ! {Full guide}
Introduction These instructions will hopefully assist you to start with a stock android device, unlock the bootloader (if necessary)...
www.lineageosrom.com
https://medium.com/@daltonfury42/building-lineageos-for-your-device-a7d26ab50549
How to build LineageOS for a device without official support?
I have a Mi 8 Lite (platina), for which there is no official LineageOS support. But LineageOS custom ROM for the device is available on XDA. On further research, I can see that vendor files, device...
android.stackexchange.com
Anyone wants to try?

I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..

Sure, that could be first step. Let us see how well treble is implemented.

ping840907 said:
I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..
Click to expand...
Click to collapse
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!

Gsdark said:
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!
Click to expand...
Click to collapse
How did you flash the system.img? I believe you need to restart on fastboot, use the command "fastboot reboot fastboot" and only then "fastboot flash system system.img"
Anyone who has unlocked the bootloader but does not want to format the current Android installation to test a GSI, can test it using DSU first

waiting for this rom

Waiting for custom rom

a CRDroid ROM for POCO M3 please.
The hardware specs are 95% the same as REDMI 9T

No forum for redmi 9T, so i think poco m3 has a little bit chance to get supported soon

lineageos ? ?
yes please

Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.

0

ppGabe said:
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.
Click to expand...
Click to collapse
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.

Rama Himura said:
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.
Click to expand...
Click to collapse
I'm not really the person to ask about this. I've just pulled those from the telegram group. You can join the telegram group, there's definitely more knowledgeable people there.

LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus

twrp_citrus-POCOM3_3.5-1.A10-08-03-2021-D-BL.img​https://androidfilehost.com/?fid=2188818919693749308

juve60tet said:
LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus
Click to expand...
Click to collapse
Should be noted that there is still a bluetooth bug in this version, but I'm sure it'll get fixed, devs know what they're doing Test and provide feedback people!

I tried this on my EU Poco M3 with 4GB RAM and 8GB flash and it failed to boot. I think it failed immediately after the bootloader so probably the kernel had some boot error while booting.

Installed LOS and it booted up and works great except for Bluetooth. Can't wait for further updates, been holding off using my M3 until now.

Works like charm for a initial build, very thx
Here my way to got it running:
1. Unlock Bootloader
2. Tried TWRP Fork but messed with the reboot ^^ (i was just to dump)
3. Tried OrangeFox Fork from here
4. Important! After recoveryflash via fastboot, hold down power and vol+ button until Orange Fox appears on screen (normal restart causes recovery image to get wiped out. I told you i was to dump in the first place so i didn't try TWRP again but i guess would also work)
5. Stock Rom seemed after Install dead to me, because of stuck at MIUI Logo (but maybe i did not wait long enough and i updated to 12.0.7. befor and did a factory reset)
6. OrangeFox showed that Partitions are encrypted.
7. Got Xiaomi EU Rom here (I used 12.0.4 because 12.0.6. were taken off again yesterday while i downloaded it.. lol)
8. In OrangeFox now i wiped all cache, dalvik and data (Need because of encryption) but do no restart after it (i did restart one time to see what happens to the encryption, but i had in mind i got a problem after it, so you should try without restart first)
9. Flash Xiaomi EU Rom with OrangeFox (tried to boot after flash into this rom but stuck on MIUI Logo, but maybe did not waited long enough again^^)
10. Flash LineageOS 17.1 from juve60tet and wipe caches again and reboot.
11. Working Lineage OS on Poco M3
Bugs i noted:
Bluetooth as already known
Fingerprint sensor selects Wigeds/Icons on Homescreen like when navigating with a keyboard or a controller in Android.