Related
Hi guys,
I just installed the Spigen GLAStR Nano Slim Tempered Glass Protector. I bought it off Amazon and it came pretty quick despite the holidays. I've attached pictures of the glass on my Nexus 5. Sorry I didn't get pictures of the installation process. I didn't want to risk getting dust underneath, so I had to do it quick.
I used the "Hinge Method" to put the screen on. And as you can see I got slight bubbles at the bottom (circled in red), so the installation wasn't perfect. I also have 1 tiny micro bubble in the middle...it's hardly noticeable even with the screen off/on and is probably less than .5mm in diameter. I would still suggest using this method for any screen protector installation.
After about 30 minutes, I used a micofiber cloth-covered squeegee to push out those bubbles that were circled...and they're gone! I just have that tiny ass one in the middle.
Overall it feels great, and its definitely smooth with the oleophobic coating...I haven't put my Cruzerlite case on yet, gonna give it some time for the glass' adhesive to settle in. I will comment on that soon!
Any questions? Feel free to hit me up!
Best,
K
Amazon link: http://www.amazon.com/dp/B00GN1L626/ref=twister_B00GN1L3Q0
Tempered Glass w/ Cruzerlite Case On
Hi all,
Just an update here. I let the glass sit overnight and all the bubbles were gone..even that micro bubble in the middle of the screen. This morning, I slapped on my Cruzerlite TPU case, to see if there was any peeling of the glass, or any fit issues.
Initially, it seemed everything was fine. However, after I got to work, I noticed that in the left bottom corner, the case began to push the glass up a little, especially if I pushed on that edge. As such, I decided to remove the case to prevent any more issues.
Spigen's GLAStR screen protector seems like a good one, but I think if they increased the edges 1mm in each direction, the Cruzerlite case would sit on top and sort of seal the glass rather than hit edge-to-edge like in this case, causing the glass to begin peeling. I've attached pictures to show what it looks like with the case on.
Let me know if you have any questions!
K
Thanks for the review. I got one as a replacement from the previous defective ones.
As I have not applied mine yet, can you describe what is the "Hinge" method?
Cheers
MaelstromXC said:
Thanks for the review. I got one as a replacement from the previous defective ones.
As I have not applied mine yet, can you describe what is the "Hinge" method?
Cheers
Click to expand...
Click to collapse
Sure. The Hinge method is where you take the screen protector and tape it to the phone BEFORE you peel the protective film away.
1) Align the screen protector to exactly where you want it
2) Tape one side of the protector so that you can swing it open like a door (tape in two places..I put a piece near the power button and one a little further down
3) Open up the "door" that you just made and clean your naked screen so there is no lint, dust, hair etc.
5) Make sure the protector aligns just as you want it
4) Then peel the "backside" of the film off so that the adhesive side is exposed and "close the door" so the protector is on the phone
5) Immediately take a squeege and cover it in a micofiber cloth and push out any bubbles you may have
6) Peel away the front of the screen protector
7) Using the squeegee that's inside the cloth (VERY IMPORTANT so you don't scratch the glass), push out any remaining bubbles
8) DONE! ENJOY!
Here's an example: http://www.youtube.com/watch?v=dt9_fZDT-As
Best,
K
Nice review and a +1 for the hinge method. Only way to install a 'dry' screen protector for me!
Just received mine today. Install went great except I noticed an air bubble on the left side about halfway down, right on the edge. Well, when I took a closer look, it was actually a chip in the glass.
Contacted Spigen Support and I am waiting for a response. Hopefully they can help me out.
Sent from my Nexus 5 using XDA Premium 4 mobile app
eyeisdasteve said:
Just received mine today. Install went great except I noticed an air bubble on the left side about halfway down, right on the edge. Well, when I took a closer look, it was actually a chip in the glass.
Contacted Spigen Support and I am waiting for a response. Hopefully they can help me out.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That sucks! I hope they are responsive. Did you go with the hinge method as well during installation? I noticed that my glass is slightly off to the right.. Didn't get it perfect.. Oh well.
Sent from my Nexus 5 using Tapatalk
KTT16 said:
That sucks! I hope they are responsive. Did you go with the hinge method as well during installation? I noticed that my glass is slightly off to the right.. Didn't get it perfect.. Oh well.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I didn't go for the hinge method. But I have used it in the past and it works pretty well.
The chip is pretty small so its not interfering with anything on the screen, as long as it doesn't get worse.
Spigen sent me an email back with a case number and said I should be contacted within 1-3 business days. Hoping for the best!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Saved my phone!
Im not 100% sure HOW it saved my phone, but im sold on them and will be buying a replacement!
my son likes to hide my phone, last night he hid my phone under my recliner (which hits the floor when rocking) and as i was rocking away i heard CRACK / CRUNCH....looked under the chair to find my phone with two very prominent pressure cracks on the screen...
i thought NO WAY was this ONLY the Nano.TR....as i pulled up the corners, the glasses started breaking and falling apart, but low and behold, not a single scratch or dent on my phones screen!
Completely blown away that my phone's screen didn't crack under the pressure.....sold on them forever!
eyeisdasteve said:
I didn't go for the hinge method. But I have used it in the past and it works pretty well.
The chip is pretty small so its not interfering with anything on the screen, as long as it doesn't get worse.
Spigen sent me an email back with a case number and said I should be contacted within 1-3 business days. Hoping for the best!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So because of the chip in the edge of the protector it ended up just cracking across the screen.
I can't feel the crack but you can see it.
No email back from Spigen yet. Buy I did update them on the hairline crack across.
Still hoping for the best.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Reminds me if my car's windshield... that was a couple hundred down the tube... Lol.. good luck!
Sent from my Nexus 5 using Tapatalk
Still no email back from Spigen. Its been almost 7 days with no response. They said I would get an email back in 1-3 days. -.-'
Sent from my Nexus 5 using XDA Premium 4 mobile app
It's the first time I try a glass screen protector, this one is very wonderful. There is only a micro-chip somewhere, but I can't see it in normal conditions, I have to examine my screen closely for like one minute to spot it.
Putting it on the screen was very easy, much easier than plastic screen protectors.
It fits nicely with official Google bumper case.
Without a case?
Hey guys, I personally want to buy this Spigen protector (.tr version) because I hate cases on my mobile phone. I'm not going to waste €36 (yes, its the Netherlands) if I also have to apply a case on it. So is this screenprotector drop-proof? If I drop this phone from 1 meter from the surface, would it be able to save the ORIGINAL glass?
Thanks,
Viresh
VireshRamcharan said:
Hey guys, I personally want to buy this Spigen protector (.tr version) because I hate cases on my mobile phone. I'm not going to waste €36 (yes, its the Netherlands) if I also have to apply a case on it. So is this screenprotector drop-proof? If I drop this phone from 1 meter from the surface, would it be able to save the ORIGINAL glass?
Thanks,
Viresh
Click to expand...
Click to collapse
They recommend a case with this product because they say the protector would crack easily without any case over time.
Ano59 said:
They recommend a case with this product because they say the protector would crack easily without any case over time.
Click to expand...
Click to collapse
What do you mean by "over time", considering my usage, I have only dropped my old phone (SGS+) once in the two years of intensive usage. As SGS+ is a smart strong boy, it doesn't break, not even a scratch. Would the Glas.tR, 0.4 mm, survive a 1 meter downfall? Thanks in advance yo
VireshRamcharan said:
What do you mean by "over time", considering my usage, I have only dropped my old phone (SGS+) once in the two years of intensive usage. As SGS+ is a smart strong boy, it doesn't break, not even a scratch. Would the Glas.tR, 0.4 mm, survive a 1 meter downfall? Thanks in advance yo
Click to expand...
Click to collapse
Well, sorry but I have no idea. It's only written that they strongly recommend using a case along with the glass.
VireshRamcharan said:
What do you mean by "over time", considering my usage, I have only dropped my old phone (SGS+) once in the two years of intensive usage. As SGS+ is a smart strong boy, it doesn't break, not even a scratch. Would the Glas.tR, 0.4 mm, survive a 1 meter downfall? Thanks in advance yo
Click to expand...
Click to collapse
It depends on how it falls obviously, but I'd say chances are pretty good that the glass screen protector would be cracked or chipped after a fall, especially onto a hard surface like concrete. I have the GLAS.t on my N5 and like you I prefer no case and am very careful with my phone. But even just casual daily use, the screen protector has chipped, and it's been the case with several others too (spanning a variety of different brands as well).
So I would proceed with caution and really consider if it's worth sinking the money into. That being said, if the screen protector chips or cracks after a fall, it's taking damage that would otherwise be applied to your phone, which is its purpose to begin with.
b.spec said:
It depends on how it falls obviously, but I'd say chances are pretty good that the glass screen protector would be cracked or chipped after a fall, especially onto a hard surface like concrete. I have the GLAS.t on my N5 and like you I prefer no case and am very careful with my phone. But even just casual daily use, the screen protector has chipped, and it's been the case with several others too (spanning a variety of different brands as well).
So I would proceed with caution and really consider if it's worth sinking the money into. That being said, if the screen protector chips or cracks after a fall, it's taking damage that would otherwise be applied to your phone, which is its purpose to begin with.
Click to expand...
Click to collapse
Thanks man
VireshRamcharan said:
So, a fall from 1 meter above on a hard surface, with the glass .tR 0.4mm applied, straight on its front would prevent the ORIGINAL Nexus 5 glass from cracking? (i know the spigen **** will crack)
Click to expand...
Click to collapse
There's no reason to expect any screen protector would save a phone from a drop. Screen protectors are meant for preventing the glass from being scratched. If the drop is sufficient to damage the screen, I strongly feel it would damage the screen through a 0.4mm sheet of glass overlaying your screen.
Cases, however, are what you use to protect phones from drops.
I scratched my icarez glass protector this afternoon, I knew it was a bad ides to just throw my phone in my bag but that's why I got a protector. Now I have about a 1 inch scratch down the middle and it annoys me almost as much as if my actual screen was scratched.
Am I crazy for wanting to buy a new one now? 10$ isn't crazy but I should probably try and pace myself.
randyspants said:
I scratched my icarez glass protector this afternoon, I knew it was a bad ides to just throw my phone in my bag but that's why I got a protector. Now I have about a 1 inch scratch down the middle and it annoys me almost as much as if my actual screen was scratched.
Am I crazy for wanting to buy a new one now? 10$ isn't crazy but I should probably try and pace myself.
Click to expand...
Click to collapse
I wonder what was in the bag. As all protector companies use terms like 9H hardness usually everything except sand will make such a scratch. So either they are all lying (which of course they are) or something special was in the bag (which I doubt).
Marketing BS sucks
Haha ya nothing special, some plastic headphones and some paperwork. Maybe it was a staple from that or just the zipper on the way in/out. Either way not mad one bit just amused at myself for wanting to replace the protector for doing its job and taking a scratch
I would replace it. Depending on how deep the scratch is it still turn into a crack which isn't fun.
Same i got the Nillkin 9H one, i got a small scratch on it...
Sent from from my LG-D855
My Spigen randomly cracked on my D850, I don't think there was a scratch. Also don't forget its still glass and it will eventually break depending on how deep of a scratch it is.
The only thing I could get to scratch the protector was a serrated kitchen knife. A screwdriver, scissors, keys, etc. couldn't do it.
My Nillkin one scratched in under a week.
I was on a morning flight one day and had the phone resting on my belly/lap whilst taking a nap, when I woke up I found it scratched an inch down the centre, I think it may be from the seat belt buckle.
I ordered a bepak one as that had moulded holes around speaker grille and sensor rather than a big cutout, during the time the bepak arrived a crack formed across the top separate from the original scratch.
Never again Nillkin.
MrDerrickC said:
My Nillkin one scratched in under a week.
I was on a morning flight one day and had the phone resting on my belly/lap whilst taking a nap, when I woke up I found it scratched an inch down the centre, I think it may be from the seat belt buckle.
I ordered a bepak one as that had moulded holes around speaker grille and sensor rather than a big cutout, during the time the bepak arrived a crack formed across the top separate from the original scratch.
Never again Nillkin.
Click to expand...
Click to collapse
I've ordered a Bepak one today as well... read good reviews about it till now. Lets see how it holds out. I have a tendency to keep my phone in my bag while gymming & stuff so hopefully it holds a little longer that the normal ones do.
On the main topic though, just be glad you had a screen protector on atleast! That scratch directly on the screen and it would've costed far more than 10$! Then again, you're not crazy about wanting to replace it right away.. the G3 is a piece of beauty and a scratch makes it really annoying everytime you see it.
if4ct0r said:
I've ordered a Bepak one today as well... read good reviews about it till now. Lets see how it holds out. I have a tendency to keep my phone in my bag while gymming & stuff so hopefully it holds a little longer that the normal ones do.
On the main topic though, just be glad you had a screen protector on atleast! That scratch directly on the screen and it would've costed far more than 10$! Then again, you're not crazy about wanting to replace it right away.. the G3 is a piece of beauty and a scratch makes it really annoying everytime you see it.
Click to expand...
Click to collapse
In my opinion, the nillkin is probably softer then the screen itself. It scratched up too easily.
The bepak feels "harder"
Sent from my LG-D855 using Tapatalk
MrDerrickC said:
In my opinion, the nillkin is probably softer then the screen itself. It scratched up too easily.
The bepak feels "harder"
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Strange isn't it. Both mention 9H hardness. Yet one feels softer and scratches easily. I guess you cant't really trust what these guys mention on their product description.
I wouldn't worry about it as long as actual screen us not damaged. I would wait until the protector screen actually damaged or cracked.
I had my nexus 4 for over a year without a screen protector and still don't see a scratch on it.
This lg has the same glass I believe. Gorilla glass 3 I think. I don't think a screen protector is needed though maybe it would help with keeping the glass from shattering. I'm not sure though. I would get one if that is the case.
Sent from my LG-D851 using XDA Free mobile app
I might take some hate for saying this, but I've always been an advocate of the plastic screen protectors. I've tried the glass, and encountered the same problems that you states, OP. I find that the plastic ones work better for me.
There was a ton of marketing and advertising for the glass stuff, but I think that it was a little over the top. The plastic is better in my opinion.
dianestory2 said:
The plastic is better in my opinion.
Click to expand...
Click to collapse
How is that?
It's considerably more difficult to put on without getting bubbles.
It's considerably less panel-breaking protective.
It's considerably less scratch resistant.
It's considerably less smooth.
These, by the way, are not personal judgments but facts
Plastic screen protectors attract a crap load more finger prints and are harder to clean off compared to glass.
Cailifu brand on Amazon claims to carry a 1 year warranty. Came with the exact same inserts and application tools as the icarez
Sent from my LGLS990 using XDA Free mobile app
Does the screen protector just protect from scratches or would it also help with a drop?
Sent from my LG-D851 using XDA Free mobile app
I am using a glass protector for now 1.5 month and not a single scratch yet! It's however significantly thicker than plastic one! Sometimes I feel the touch less responsive.. It also catches fingerprint and dirt like a magnet lol (probably no oleophobic coating) I found the G3 screen itself very very good! your finger just slips fluently across the screen and barely catches any fingerprint! I installed one just for extra protector I'd say worth it if you don't mind cleaning your screen more frequently
Pfeffernuss said:
How is that?
It's considerably more difficult to put on without getting bubbles.
It's considerably less panel-breaking protective.
It's considerably less scratch resistant.
It's considerably less smooth.
These, by the way, are not personal judgments but facts
Click to expand...
Click to collapse
1) not if done the right way
2) agreed
3) I've never ever ever had a scratch on my phone, plastic or glass
4) only a little.
For my personal lifestyle, I don't really care that much about all of that. I'm glad you are so supportive, though
[Okay! I just got my cover (1 day before it was supposed to arrive LOL just like it happened with my V20). Anyway. This is my review:
First of all, here is the link to purchase the cover (maybe cheaper in other websites, maybe not):
http://www.ebay.com/itm/26267917850...49&var=561595568110&ssPageName=STRK:MEBIDX:IT
Now, lets proceed by telling you what was included:
1x Heavy duty cover (dual layers, 3 pcs); 1x Premium Tempered Glass; 1x Dust absorbant cloth; 1x Cleaning wipe
Finally, Lets get to the review! The good and the bad:
The good: I like the cover. So far i dropped the phone from 3 feets and nothing happened to it. The cover meets Military Grade 810.1-G Compliancy. The first layer feels like a fat layer of clear TPU but it doesnt feel bad at all. The outer layers are made of Polycarbonate to absorb the falls. The TPU layer is enough to absorb the impact but the 2 layers of polycarbonate have 2 purposes to protect, but also to make the phone adjust firmly in the cover. The audio jack and the type c usb port both have dustproof covers so that it doesnt penetrate any dust particles. easily to open and close. With this cover you will be able to use every functionality. Including IR Blaster, and every mic has its big enough hole to let the voice sound as clear as possible. cover doesnt feel bulky, to put it inside your pocket with or without cover, you wouldnt notice the difference (see the picture of the rule and measure your phone with one). it is very light too. Now, the screen protector, im sure it was premium, but i messed up putting it (STUPID DUST PARTICLES FLOATING EVERYWHERE), so now i have to buy a new screen protector lol.
The bad: 1) Your fingerprints will stay on the TPU layer (light fingerprints) but they still there. So,,, if you are into security and no trusting anyone and thinking about someone will do conspiracy against you and will use your fingerprint to unlock the phone, well,,,, it is not for you, unless you paint it with an spray ; 2) possibly another bad side: if you are no accustomed to the volume buttons on the side of the device and have to constantly looking for where exactly to press, then this is not a cover for you, since the buttons totally disappear with it. On the other hand, they are easily to press if you are accustomed to the volume buttons on the side; 3) The cover might slip if the material of the surface were you put it is made of Anodized aluminum or any other material that has been processed or polished.
Funny Fact: Seems that they created the cover missing some information about the phone's physic, since they added a button in the right low side of the cover which has no purpose there LOL!
I havent had any scratch so far (from the fall) yet.
If there is any question, please let me know, and i will try to answer. Or any other comments.
Cheers!
@aknotts415 >> here is what i think about the cover. Pictures are on the first post too
haha..thanks...i was just about to post here and ask if anyone has any thoughts on this case...i'm stuck between this zizo and the poetic...
i dont want to take any chances...I had a Note 7..then replaced it with a recalled version...had a nice spigen tough armor case on it but no screen protector...I accidentally dropped it at work and managed to somehow scratch the screen lightly..i guess it doesnt matter since i'll be replacing it with my LG V20 arriving tomorrow...:good:
**oh, could you post some more pics with the case on...maybe during the daytime with more lighting...so how was the tempered glass protector??? was it actually pretty thick, and any advice on getting it on perfectly???
iLLxLBPSTi said:
haha..thanks...i was just about to post here and ask if anyone has any thoughts on this case...i'm stuck between this zizo and the poetic...
i dont want to take any chances...I had a Note 7..then replaced it with a recalled version...had a nice spigen tough armor case on it but no screen protector...I accidentally dropped it at work and managed to somehow scratch the screen lightly..i guess it doesnt matter since i'll be replacing it with my LG V20 arriving tomorrow...:good:
**oh, could you post some more pics with the case on...maybe during the daytime with more lighting...so how was the tempered glass protector??? was it actually pretty thick, and any advice on getting it on perfectly???
Click to expand...
Click to collapse
When i come from college today at 11 am i will posting more pictures from every angle.. Now, about the tempered glass, it is very thick. if it werent for the dust particles in my living room, i would have put it perfectly, Something that i like is that when you put the screen protector, and the put the cover, there is no way any dust will go inside, at least from the front part, since the polycarbonate layer presses the tempered glass, hard enough to no let any dust go inside. So, neither from the front nor the audiojack nor the type c port, you will get dust. I just bought 2 tempere glasses on ebay ahhahahah.
Few advices to put it perfectly: go to a place inside your house where there is the least amount of dust (no air conditioner, no windows, and no fans rotating), clean your hands with alcohol, and let it dry. then start from the hardest part, The top, as soon as you align the top and the edges on the top, it wil become easier. Now, i noticed that many of the screen protectors, such as this one:
https://www.amazon.com/Mr-Shield-Te...ywords=lg+v20+tempered+glass+screen+protector
Are not been built correctly. As you can see on the reviews, you will see people talking about the tempered glass not properly adjusting to the edges, And to be honest, i dont know if this tempered glass i used but put wrong had the same issue since i see the edges not properly adjusted . maybe because i removed it 2 times and put it back on, or maybe is the built quality. Anyway, im going to wait for the other tempered glasses. and see if those have the same issue.
i bought this one:
http://www.ebay.com/itm/182283071096?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
joseguillen1994 said:
@aknotts415 >> here is what i think about the cover. Pictures are on the first post too
Click to expand...
Click to collapse
Sweet case. Thanks for putting up pics. Does the black outer pieces feel cheap?
joseguillen1994 said:
When i come from college today at 11 am i will posting more pictures from every angle..
Click to expand...
Click to collapse
looking forward to seeing more pics of the case
aknotts415 said:
Sweet case. Thanks for putting up pics. Does the black outer pieces feel cheap?
Click to expand...
Click to collapse
It doesnt feel bad, it could be better though if it were aluminum probably. But i figure that the polycarbonate absorbs impact better than metal. Also, please revisit the the first post of the thread, i made some changes into my review you might want to read.
aknotts415 said:
looking forward to seeing more pics of the case
Click to expand...
Click to collapse
Im Posting the 2nd wave of pictures now
2nd wave of pictures (will also be posted on first post)
Sorry for the bad quality, i was shooting with my LG G3 LOL
joseguillen1994 said:
Sorry for the bad quality, i was shooting with my LG G3 LOL
Click to expand...
Click to collapse
nice pics! you still have the plastic on the fingerprint scanner btw lol
aknotts415 said:
nice pics! you still have the plastic on the fingerprint scanner btw lol
Click to expand...
Click to collapse
Loooooool yes. I even have the plastic in the camera and the back of the phone
Does the case block off the 2nd screen? From the official site pics, it seems like it.
thx for posting up more pics...i will definitely order this soon...my phone will be here in an hour or two...
Logi23 said:
Does the case block off the 2nd screen? From the official site pics, it seems like it.
Click to expand...
Click to collapse
it doesnt look like it does..if you look at pics 8...shows a good gap between the regular battery/time info and the top portion of the case...
Logi23 said:
Does the case block off the 2nd screen? From the official site pics, it seems like it.
Click to expand...
Click to collapse
Nope. It doesnt. it leaves even an extra small space after the 2nd screen just to make sure that every touch does work. Also it leaves a small space after every edge for the same reasons. :good:
joseguillen1994 said:
Nope. It doesnt. eat leaves even an extra small space after the 2nd screen just to make sure that every touch does work. Also it leaves a small space after every edge for the same reasons. :good:
Click to expand...
Click to collapse
Ah, I gotcha. Wonder why the pics from their official site and ebay show the front panel like it covers the whole second screen for some of the case colors.
Logi23 said:
Ah, I gotcha. Wonder why the pics from their official site and ebay show the front panel like it covers the whole second screen for some of the case colors.
Click to expand...
Click to collapse
Oh! you are right hahahah. I didn't notice that until i went to the same link on ebay now. The black one shows the 2nd screen, but the others show it as covered . hahaha Probably for the same reason they added something extra to the case that it didnt need to be there as you might have noticed in the picture #8 of the first post i uploaded. But just to play safe, if you will bu y the cover, ask them first.
So my charging flap is already not staying put. I only charged it once and the flap is already loose .
Sent from my LG-H918 using XDA-Developers mobile app
i went ahead and ordered one as well...also ordered this for when im in the house and dont need the full protection...
I ordered the green one. Too cheap to pay for expedited shipping so not sure how quickly it will be here.
My v20 will be here tomorrow and my cheap case from Amazon prime will also be here tomorrow!
Sent from my awesome T-Mobile LG V10!
Jooosty said:
So my charging flap is already not staying put. I only charged it once and the flap is already loose .
Sent from my LG-H918 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah at first i thought the same about mine. But then after a minute or 2 it came back to normal and iI t stayed put covering pretty well. Did you try after a short period of time?
Well , for the time being, i did a little adjustment to mine lol and it worked. I put a very very very thin layer of superglue on the edge of the port-cover and waited for it to dry, now the superglue is part of the case, but now the dustcover protector stays there the second i want it to stay there. Although it is not necessary because as i said before, it will come back to normal after about 1 minute or 2 minutes.
On the other hand, I just dont want to return the cover and have my phone naked for another week LOL . And also, i kind of like how thin it is yet very protective. and the seller gave me $5 dollars back because seems like the "premium screen protector" is one of those that wont stick to the edges correctly, althoguht it might have been my fault since i removed it 3 times and put it back on.
planetbeen said:
I ordered the green one. Too cheap to pay for expedited shipping so not sure how quickly it will be here.
My v20 will be here tomorrow and my cheap case from Amazon prime will also be here tomorrow!
Sent from my awesome T-Mobile LG V10!
Click to expand...
Click to collapse
Hey i have a question. when you open the cover to plug the usb charger, does it remains open? or is it like mine that after a few minutes it does closes okay?
Hello all,
I'm looking for the best tempered glass screen protector for Pixel 2. I have looked through the List of Google Pixel 2 Screen Protectors and I have searched Amazon too, but the reviews are either fake-5-star-reviews, or generally poor reviews.
Can anyone recommend the best option for a Pixel 2 tempered glass screen protector?
Thank you
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Spigen, take your time as it fits perfectly side to side on the visual part of the screen only.
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
munchy_cool said:
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Click to expand...
Click to collapse
is it full adhesive and curved on the edge?
koax88 said:
is it full adhesive and curved on the edge?
Click to expand...
Click to collapse
nopes
If you are looking for the best, whitestone dome is probably the way to go. It is expensive though. If you aren't worried about full adhesive and curved so it passes the edge of the display there are a lot more options. Spiegen is good for a lower cost option, but it only goes to the edge of the display and doesn't curve.
Thank you for all the suggestions. I'll definitely use one of these screen protectors
ElaineM said:
Thank you for all the suggestions. I'll definitely use one of these screen protectors
Click to expand...
Click to collapse
avoid those on ebay for under $3 or aliexpress. you'll just waste your time
Keithn said:
whitestone dome .
Click to expand...
Click to collapse
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
boondiordna said:
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
Click to expand...
Click to collapse
I'm currently using one. I think it would fit the Google case, but I haven't tried. I've used it with an OtterBox symmetry, a speigen tpu, and with the moment case with no issues. It covers the full display but still leaves gaps on the edges.
I haven't noticed any significant blue light filtering but I did see that the description stated that. I can try to compare it against another Pixel 2 with a different screen protector and see.
Thanks, that would be nice of you if you could have a look at a second Pixel 2.
FTR, I turned off colour boosting, and really appreciate the near-natural colour provided by Google's OLED settings. I couldn't understand why people complained about the "faded" colours in the beginning. I bought this thing as a camera with a phone, and I want to see my photos as close to what I see while shooting them. Filtering blue light is a bit of a deal-breaker for the glass dome, if perceivable.
I've had 2 Whitestone Dome Glass protectors. The first had to be replaced when my phone slipped through the gap in my pull out couch and when trying to get out it slipped under one of the couch legs, crushing the screen (no screen protector will help in that case). The second came in today, after some back and forth with Whitedome trying to figure out why it was showing out of stock on Amazon, and I had to trash it less than an hour after opening it.
The first one was a hassle to install but once installed I really, really liked it. The second had a broken bottom piece for installation, causing an imbalance in the phone and I went through 3 (one left over from first install) adhesion tubes before I realized that was why a good bit was slipping over the edge of the phone and not across the display. When I realized what was going on I was kind of angry it even happened, wasn't paying much attention, and the protector cracked when I was removing it to try and clean up everything...
I either got lucky with the first or REALLY unlucky with the second, but either way I'm not buying another one. The installation process isn't exceedingly difficult, but it's just way too cumbersome for what it should be, costs too much, and just isn't worth the headache. Really disappointed in it. Luckily Amazon did me a solid and is letting me refund it.
That first was by far the best I found for TGSP's for the Pixel 2. I'm really hoping the Pixel 3 goes back to fully flat glass, not this "it's curved just enough at the edges to make it extra difficult for third parties to make screen protectors" crap.
Follow-up: I tried it and it works with the fabric case, there is stilla gap. @jppowers is right about the installation process, it is a buggerance. I had an air bubble, glue spilled under the protective sticker on the speaker and it was generally cumbersome.
There is some blue light filtering, which makes sense given that the glue is near-UV-polymerised, but my brain compensates this and I don't see it if not in direct comparison with a screen without the protector.
100kaa said:
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
Click to expand...
Click to collapse
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
bbdcbb said:
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
Click to expand...
Click to collapse
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
100kaa said:
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
Click to expand...
Click to collapse
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
bbdcbb said:
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
Click to expand...
Click to collapse
Hey, I don't really know what could be the problem. At the beginning everything was OK, but later problem with dust appeared. I am in normal surroundings, with no extra dust. Office-house.
I bought, as reserve, from same guy foil protection also. Maybe it will be better.
When a screen protector only has glue on the edges the dust enters at the speaker openings. I'm still using my original Spigen Glass protector with zero dust since it adheres to the whole screen but doesn't cover the curved sides, the pack comes with 2 protectors and I will swap it out soon as the fingerprint resistance isn't the best anymore(but it's been almost a year).
Whitestone's Dome is definitely the best by far, but just as everyone else has mentioned, the installation process is a massive hemorrhoid. For what they charge they oughta include a professional in-home installation service.
I highly suggest to anyone who gets the Dome, set aside 2 hours, watch the videos online, prep your area, and be extremely patient. Also, make sure you've eaten and haven't had anything that will make you jittery or anxious like coffee, it will make the whole process much easier to handle and you'll be much less likely to fly into a rage if you run into issues.
Also, as mentioned by others, be sure to fully inspect your glass before you attempt to install it. There is a very thin film on the back of the glass to keep it from splintering in the event of a shatter, and sometimes they end up with bubbles between the glass and film during manufacturing. I went through both tubes of adhesive and a lot of frustration before I realized the bubble was not a personal application error but a flaw in the glass. Getting a replacement was no issue, but I still lost two hours and grumbled quite a few choice words.
Caveats aside, it's a superb full coverage TGSP.
Anyone else with a couple of tiny air bubbles or imperfections in the application of the factory screen protector out of the box? I have 2 but they are tiny and only show in certain lights and angles. They are like little dots.
But it does make me worry if Samsung can't apply it perfectly , what chance do I have when I need to replace it?!
Nope me and my wife both have the phone. No bubbles. Was hard to even see the protector at first.
Same I didn't even notice it was there until I peeled of the first layer protector then I could see the real protector underneath
AceDaMack said:
Same I didn't even notice it was there until I peeled of the first layer protector then I could see the real protector underneath
Click to expand...
Click to collapse
Ok, so there's 2 layers? Like a thin protector covering the ACTUAL screen protector? I just want to make sure before I peel the top layer back.
Sent from my SM-N975U using Tapatalk
ianmb said:
Ok, so there's 2 layers? Like a thin protector covering the ACTUAL screen protector? I just want to make sure before I peel the top layer back.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Got a pic of the protector on yours now?
DeeXii said:
Got a pic of the protector on yours now?
Click to expand...
Click to collapse
I dont. But I haven't removed any protector except for the thin film one on the back.
Sent from my SM-N975U using Tapatalk
I left whatever was on there in the box. Fingerprint seems slow but other than that it is good. Are there 2 layers on top?
After a day or two, I had about 3 bubbles show. Not tiny too. I pressed all of them with my fingers. Even rubbed the really tiny one with my nail. That seemed to work
3 note 10 pluses unlocked . only one protector on top.. not two. ive removed the protectors ....
I had a small bump that I tried to scratch off and it is now a small pin hole. Drives me crazy, even though it's hard to see. I chatted with Samsung and they said to take the phone to the Samsung Experience store at Best Buy and they would replace the screen protector. Turned out to be bad information as Best Buy has no replacement parts. I called back and was told it is a warranty item, but Samsung has no replacement screen protectors!!..No time line known to have them.. Also, told I could not remove the existing screen protector as I could damage the screen and it would void warranty.. Not impressed with their lousy customer service!
Sent from my SM-N975U1 using Tapatalk
I am not sure, but the protector preinstalled may be just as the back one, just a packing protective measure
My factory installed one has glue or something on it that won't come off and samsung has no idea what to do
oneandroidnut said:
My factory installed one has glue or something on it that won't come off and samsung has no idea what to do
Click to expand...
Click to collapse
Wow...,seeing that I took a very close look on mine, I don't see any blemishes. Hope it's just some left over glue or dust underneath the plastic protector. Am gonna be taking that protector off as soon as it starts to wear-off.
mzsquared said:
Wow...,seeing that I took a very close look on mine, I don't see any blemishes. Hope it's just some left over glue or dust underneath the plastic protector. Am gonna be taking that protector off as soon as it starts to wear-off.
Click to expand...
Click to collapse
Yeah I told samsung I am not removing until I have a replacement to see if I have anything underneath but I doubt it as it is rough in that area as I run my hand over it
I removed mine when I got it. It just stuck out too much for me.
oneandroidnut said:
Yeah I told samsung I am not removing until I have a replacement to see if I have anything underneath but I doubt it as it is rough in that area as I run my hand over it
Click to expand...
Click to collapse
Costs saving lack of HEPA Clean Room rule for $1000+++ phones assembly line?
mzsquared said:
Costs saving lack of HEPA Clean Room rule for $1000+++ phones assembly line?
Click to expand...
Click to collapse
I honestly don't think it was that i think it was during boxing. From some manuals or the box, something in that stage the phone is money and screen protector as well just something on top i think
Not here.
It was 2 protector on front of mines and wife the top first layer looked like 1 on back with the tab and all and second layer was actual screen protector I got att device idk if that have to do with but the box was different.
oneandroidnut said:
My factory installed one has glue or something on it that won't come off and samsung has no idea what to do
Click to expand...
Click to collapse
That looks like it was marred. Been there, done that.
The factory screen protector is pretty good; leave it on as long as you can. It really can save your screen... I inadvertently tested it in a nasty drop onto a rough metal edge from 2 feet. No glass damage at all.
These phones love to faceplant...
Gorilla IQ Sheild is the only 3rd party protector I would recommend. Self healing, very scratch resistant and a fairly easy wet apply. No bubbles and the tactile feel is acceptable.
Pay close attention to installation. Since it's a wet apply, placement is easy just allow at least 10 hours drying time. If it lifts on the curve even after a month take a little bit water, wet and reapply that portion before dirt gets under it. Make sure it's sticking on the curve surfaces on install; simply press it down an extra time or two in the first few minutes.
Works with any case.
Got 3 months on this one and still looks great. Two to a box.