Hi guys!
As the thread suggests, I'm sharing with you some amazing magisk modules that will give you the opportunity to raise the refresh rate of your screen.
Of course, every zip here doesn't give you the opportunity to delete it later, so in order to restore your stock setup, you need to make a backup of your boot.img via magisk (will save dtbo too)
ALL THANKS FOR THOSE MODULES GO TO @NTH94 , he was very kind to share those to me and for all the community.
So, here they go:
ScreenOC for Bliss\crDroid with "AND ONLY" Kowalski Kernel: here
ScreenOC for Derpfest "Based off paperplane Kernel": here
ScreenOC for MIUI 11 Based on Q "Xiaomi.eu V11.0.1.0": here
ScreenOC for MIUI 11 Based on Pie "Xiaomi.eu V11.0.5.0":here
And that'it! If your rom bootloop after you've installed this zip via magisk, just restore your boot.img backup, and send me out the dtbo.img contained on your rom, and i'll kindly ask the dev if he can support it as well! Have a nice day everyone
If you need any kind of assistance, wrote back here and I'll try to provide as much help as I can
Reserved for something
Zero_One said:
Hi guys!
And that'it! If your rom bootloop after you've installed this zip via magisk, just restore your boot.img backup...
Click to expand...
Click to collapse
Rather: install again and set "60".
Or
Restore/flash dtbo.img(it can be also unzipped - 60.img)
dzidexx said:
Rather: install again and set "60".
Or
Restore/flash dtbo.img(it can be also unzipped - 60.img)
Click to expand...
Click to collapse
Not just restore dtbo. Always restore both Boot.img and dtbo.img (more secure and less bugs could appear )
Updated the module for Bliss/CrDroid with Kowalski Kernel to the latest release
Enjoy!
Installed 90hz and nothing changed. Installed then 75hz and its okay. What's highest stable and working ver?
Wysłane z mojego Mi 9 SE przy użyciu Tapatalka
I need to turn on DC Dimming and Disable HW Overlays in Developer Options while flash this mode???
Thanks, 75Hz work fine in my developer 20.2.27 [emoji106]
Mi 9 SE using Tapatalk
Thanks maaate, 75hz working great here on the latest xiaomi.eu beta. [emoji1474]
Sent from my Mi 9 SE using Tapatalk
Which one to chose for phhhs GSIs?
Anyone tries this mod on the latest xiaomi.eu MIUI 12? Will work? Thanks
Edit : Installed, and 75hz mod is working just fine on MIUI 12.
aresbv2000 said:
Anyone tries this mod on the latest xiaomi.eu MIUI 12? Will work? Thanks
Edit : Installed, and 75hz mod is working just fine on MIUI 12.
Click to expand...
Click to collapse
Also 78Hz work fine
Mi 9 SE using Tapatalk
panamera2011 said:
Also 78Hz work fine
Mi 9 SE using Tapatalk
Click to expand...
Click to collapse
Can you actually see a big change between 60Hz and 78Hz? Also there's no bugs like greenish tone of the screen? Thank you!
Belmontguerra said:
Can you actually see a big change between 60Hz and 78Hz? Also there's no bugs like greenish tone of the screen? Thank you!
Click to expand...
Click to collapse
Yea, for me big change betwnen to 78Hz: the fingerprint is more accurate and faster, the system is all much more responsive with fluid animation and better scrolling.
I have been using it for a long time and it works perfectly on MIUI 11 and 12 without any greenish tone [emoji6]
Mi 9 SE using Tapatalk
78Hz best?
Hey, I've installed this mod too. 84Hz is working, but I don't want to break the screen.
Actually I'm using 75Hz.
Do you think there's a noticable difference between 75hz and 78hz?
You've tested 78hz for long time? And no screen issues? That's nice. Maybe I try it too
But I think 84hz could be a risk, if used to long.
panamera2011 said:
Yea, for me big change betwnen to 78Hz: the fingerprint is more accurate and faster, the system is all much more responsive with fluid animation and better scrolling.
I have been using it for a long time and it works perfectly on MIUI 11 and 12 without any greenish tone [emoji6]
Mi 9 SE using Tapatalk
Click to expand...
Click to collapse
---------- Post added at 02:14 PM ---------- Previous post was at 02:13 PM ----------
Forgot to say: the mod is working well on latest Revolution OS (Miui 12) 2020.05.13 .
NixNick89 said:
Hey, I've installed this mod too. 84Hz is working, but I don't want to break the screen.
Actually I'm using 75Hz.
Do you think there's a noticable difference between 75hz and 78hz?
You've tested 78hz for long time? And no screen issues? That's nice. Maybe I try it too
But I think 84hz could be a risk, if used to long.
---------- Post added at 02:14 PM ---------- Previous post was at 02:13 PM ----------
Forgot to say: the mod is working well on latest Revolution OS (Miui 12) 2020.05.13 .
Click to expand...
Click to collapse
I have not tried 84Hz because I think it is the limit and and more battery consumption.
In Revolution OS I think it should work without problems considering that it based on the official firmware. Anyhow, before using this mod, make a backup of dtbo partition
Mi 9 SE using Tapatalk
Hello guys. To change the screen frequency I just need install the Magisk module? Here I am using the last xiaomi.eu version (miui12). What the best version of the mod I could install? Thanks
Does this work on pixel experience (Android 10) too?
Ciao everybody! How do I install the img file and how do performthe backup? All with Magisk? thanks
Which one I have to install on miui 12 xiaomi.eu rom?
Related
Well guys, after many hours of hard work I am proud to present here my first rom in XDA. A real PORT. A Full FRAMEWORK port, from lastest MM G5 Rom, to our beloved G4. Only limited by G4 libs and hardware. So here we go:
H-ROM G5 PORT
Full UX5 ported from lastest MM G5 Kdz
20p base with Spanish modem (march security patch)
Fully deodexed
All apps from G5
G6 ported weather
All weather animations in lockscreen
Stock kernel in permissive
Magisk 12 (thanks to @topjohnwu)
Viper4Arise (thanks to @guitardedhero and @viper520)
Lastest LG apps and GAPPS
Init.d and busybox support
Multiwindow and miniview included
KNOWN BUGS
GlanceView doesn't work anymore
Device can reboot if brightness is set with a high value Solved
Camera can freeze when taking pictures with flash enabled Solved
LGWeather G6 icon doesn't appear in launcher Not a bug
Not a bug but Always ON is not possible due to kernel limitation
FLASHING INSTRUCTIONS
UNLOCKED BOOTLOADERS!
ONLY H815! BUT FOR H811 TOO!, read this
ONLY CLEAN INSTALL!
Wipe system, data, dalvik&cache, cache
Flash rom zip
Flash UPDATE H815 or UPDATE H811
First boot will take much time, have patience!
SCREENSHOTS
DOWNLOAD LINK H815
Mega: https://goo.gl/tteqVm
MD5: d36c6fb9a9c0098829069966ff624890
No mirror links please!
DOWNLOAD LINK H811
NOT SUPPORTED BY ME!
My friend @raptorddd has adapted to this variant
Mega: https://goo.gl/LGazPZ
MD5: 1328073D77336C5F5979F0DCA1A3FB4F
No mirror links please!
CREDITS
@renzetti.s
@cheloz (and dedicated to his new son
@Grouxho for smali guide
DONATIONS?
NO THANKS! I don't need coffees or beers. I really hate this way, but if you like this port (nobody has achieved it for our phone) I will be glad that read your THANKS.
DO NOT USE ANY PART, SCRIPT OR FILE OF THIS ROM WITHOUT MY PROPER PERMISSION
First....
Great work my friend...
Reserved
Great to see you here man! Can't wait to flash and play with it
Wysłane z mojego LG-H815 przy użyciu Tapatalka
I have been waiting really long for this. You sir, just made my day! I will download it immediately
[QUOTE=Astrako; A ray of light is opening in this cloudy sky for lg g4 . Great work Astrako
Great work my friend...
Finally, the real UX5 for G4! Unfortunately my G4 can't be unlocked..
İts İmpossible dude good work <3
Nice work, gonna instal later
Can't wait to try this amazing rom out!
hyped!
congratulations my friend all those hours finally paid off. thank you for your hard work.:highfive:
can you make one for H811?look forward it!
Congratulations @Astrako ??
Excellent work ?
Congratulations @Astrako ??
Excellent work ?
I know there is no weather app. But is there any option to add it because when I restart phone there is weather fc every time. Rom is fine with some little lags on UX. Good work
Sun-Mod said:
can you make one for H811?look forward it!
Click to expand...
Click to collapse
I haven't this variant. I don't know required files to make it working on this variant but I have a friend that maybe can make it working
dszymek said:
I know there is no weather app. But is there any option to add it because when I restart phone there is weather fc every time. Rom is fine with some little lags on UX. Good work
Click to expand...
Click to collapse
Strange bug. Never suffered it. Clear weather data in settings -> applications -> Weather. For now you only can go into weather app through SmartNotice or weather widgets.
Yes rom is laggy but at the beggining when you are installing apps from PlayStore. After that I personally feel faster than G4 stock.
I have installed this software and constantly comes up on the Lg screen.(bootloop) problem...And It works little laggy.
I've installed it before ( SAURON MK I.IV) and 32-bit dac flag in notification bar.Can you port this ?
Another problem; I've done everything,erase system,cache,wipe system etc etc... But it's always bootloop.What do we do?
AND Finally rom looks spectacular..
[email protected] said:
I have installed this software and constantly comes up on the Lg screen.(bootloop) problem...And It works little laggy.
I've installed it before ( SAURON MK I.IV) and 32-bit dac flag in notification bar.Can you port this ?
Another problem; I've done everything,erase system,cache,wipe system etc etc... But it's always bootloop.What do we do?
AND Finally rom looks spectacular..
Click to expand...
Click to collapse
Thanks mate. I don't understand well.... May you explain which step have you followed with rom and mods installation?
Astrako said:
Thanks mate. I don't understand well.... May you explain which step have you followed with rom and mods installation?
Click to expand...
Click to collapse
I reinstalled this ROM normally, but the Bootloop problem still continues.
How i solve this problem ?
Sorry for ENg
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Astrako said:
Thanks mate. I don't understand well.... May you explain which step have you followed with rom and mods installation?
Click to expand...
Click to collapse
I don't need the mod.i'm tested the mod to this rom It was like %50 running
---------- Post added at 06:22 PM ---------- Previous post was at 05:30 PM ----------
Astrako said:
Thanks mate. I don't understand well.... May you explain which step have you followed with rom and mods installation?
Click to expand...
Click to collapse
The bootloop issue happens 10 minutes later the phone is turned on
I have created this small Magisk module to fix low headphone volume on Mi5 Global ROMs.
Decided to create this mod as flashing the weekly MIUI 9 global beta releases leads to resetting these headset configs to defaults and want to avoid repeating the fixing steps again n again.
This mods loads the MIUI 9 china ROM config of Mi5 (namely system\etc\mixer_paths_tasha.xml) systemlessly on Global Beta ROM, so China MIUI or Xiomi.EU ROMs dont need this mod anyway. only useful for Global Beta users.
I have tested this on latest Mi5 Global beta 7.9.7 with Magisk v14 and working flawlessly.
Let me know in case of issues.
refer following thread for all fix related conversation till date.
https://forum.xda-developers.com/showpost.php?p=73669336&postcount=47
Now available in Magisk repo
Changelog
v1. Initial code
v3. Updated description
Source:
https://github.com/Magisk-Modules-Repo/Mi5-Headphone-Volume-Fix
Cheers
Chhapil
Hello, thanks for your Module FIX ....
Can work with AOSPA ROMs ?
Thanks
caoscorp said:
Hello, thanks for your Module FIX ....
Can work with AOSPA ROMs ?
Thanks
Click to expand...
Click to collapse
No need to use on AOSP/LOS roms. The issue only affects MIUI Global beta.
Sent from my MI 5 using XDA Labs
That's what I want like a crazy! Thank you so much..
Great job!
Is there a module to fix speaker low sound?
WarcoLLapsE said:
Great job!
Is there a module to fix speaker low sound?
Click to expand...
Click to collapse
havent observed any such issue
Now live in Magisk repo
---------- Post added at 01:18 PM ---------- Previous post was at 01:16 PM ----------
WarcoLLapsE said:
Great job!
Is there a module to fix speaker low sound?
Click to expand...
Click to collapse
+1
Have you seen any fix for it on any of the forums?
Point me please
KangVip B153 Huawei P20/P20 Pro - preinstalled Xposed, GPU Turbo, DPI
https://fex.net/226281679415
Downloading for test
Hello, it works for me.
Some chinese apps are installed and the launcher doesn't have the google page.
Cheers and thanks KangVip and Vovan1982 for sharing
P20 L29C432 with[Unofficial]TWRP 3.2.1-0 and .132 firmware
williamrast said:
Hello, it works for me.
Some chinese apps are installed and the launcher doesn't have the google page.
Cheers and thanks KangVip and Vovan1982 for sharing
P20 L29C432 with[Unofficial]TWRP 3.2.1-0 and .132 firmware
Click to expand...
Click to collapse
What has this rom added/changed compared with stock EMUI?
Hi zgomot,
I came back to stock...
I installed successfully but I encountered some serious lags, maybe because I don't know how to use the tweaks (K-Settings), I've changed my notifications bar and activated the call recorder, nothing more.
The phone slowed down and take 5-8 seconds to launch the camera or settings. Maybe I haven't made a clean install but for the moment I came back to stock.
My opinion
zgomot said:
What has this rom added/changed compared with stock EMUI?
Click to expand...
Click to collapse
I installed this Rom yesterday and i love it
two big advantages are of course xPosed and SuperUser,
and of course there are the kSetting but i nearly don't use them.
And with the root you can uninstall all the unnecessary app from Huawei :good:
I tried out nearly all Treble GSI's but none of them was working without reboot issues (When they were rooted)
williamrast said:
Hi zgomot,
I came back to stock...
I installed successfully but I encountered some serious lags, maybe because I don't know how to use the tweaks (K-Settings), I've changed my notifications bar and activated the call recorder, nothing more.
The phone slowed down and take 5-8 seconds to launch the camera or settings. Maybe I haven't made a clean install but for the moment I came back to stock.
Click to expand...
Click to collapse
Sounds like a bad install.. I don't have any of these issues..
Here is everything working fine. :good: :good:
Schubi97 said:
I installed this Rom yesterday and i love it
two big advantages are of course xPosed and SuperUser,
and of course there are the kSetting but i nearly don't use them.
And with the root you can uninstall all the unnecessary app from Huawei :good:
I tried out nearly all Treble GSI's but none of them was working without reboot issues (When they were rooted)
Sounds like a bad install.. I don't have any of these issues..
Here is everything working fine. :good: :good:
Click to expand...
Click to collapse
I have Root, Xposed and can remove any of the system apps with stock.
Any more info as to what these K Settings add?
Hello and on can change the value with gameguardian because With the stock ROM the value does not change because of the firmware that block
No more work on this rom ?
Sent from my [device_name] using XDA-Developers Legacy app
Hoy to install?
vovan1982 said:
KangVip B153 Huawei P20/P20 Pro - preinstalled Xposed, GPU Turbo, DPI
https://fex.net/226281679415
Click to expand...
Click to collapse
So the kernel was not modified if you could change it please like the other rom custom aurv1 for the p20 thanks in advance
????
Support EML-L29 (636) ? and how to Flash it !
Is it work on lock bootloader, i've got my phone today and just see we cannot unlock the bootloader anymore
The rom os amazing ..thanks ..?
mataflakitas said:
The rom os amazing ..thanks ..
Click to expand...
Click to collapse
You took the ROM from this forum or the new one from the p20 Pro ones?
mataflakitas said:
The rom os amazing ..thanks ..
Click to expand...
Click to collapse
Hi kernel and original it's a pity that it is not custom
https://cn.club.vmall.com/thread-18133658-1-1.html
https://cn.club.vmall.com/thread-18133763-1-1.html
P20_P20P_E9_156_Kangvip_v1.1
https://utka.su/QmpbT
others Kangvip ROMs https://clck.ru/G6Tqb
Syzran said:
https://cn.club.vmall.com/thread-18133658-1-1.html
https://cn.club.vmall.com/thread-18133763-1-1.html
P20_P20P_E9_156_Kangvip_v1.1
https://utka.su/QmpbT
others Kangvip ROMs https://utka.su/SUmdS
Click to expand...
Click to collapse
Anyone tried one of the emui 9 ones out?
Use the TWRP-All-In-One tool to install TWRP then flash the appropriate ROM, correct?
When I am inside TWRP I can't find the .rar file at all, just a bunch of random maps with random names/numbers, did I do something wrong?
Hi All -
Just wanted to make a thread here to link to the Magisk Module I created that bypasses the bootloop we get when we have CN hardware with the Global Rom. I think this will work for India and Russia hardware too. Enjoy.
https://forum.xda-developers.com/apps/magisk/module-xiaomi-global-rom-cn-hardware-t3899316
PWn3R said:
Hi All -
Just wanted to make a thread here to link to the Magisk Module I created that bypasses the bootloop we get when we have CN hardware with the Global Rom. I think this will work for India and Russia hardware too. Enjoy.
https://forum.xda-developers.com/apps/magisk/module-xiaomi-global-rom-cn-hardware-t3899316
Click to expand...
Click to collapse
Thanks for this! Have you tested this to make sure stock camera still works without any issue?
xterminater07 said:
Thanks for this! Have you tested this to make sure stock camera still works without any issue?
Click to expand...
Click to collapse
Mine never stopped working before, however, this works completely differently. This inserts a script into the boot process that happens before the device starts launching system services that changes the ro.boot.hwc and ro.boot.hwcountry to be "global". The other way I was doing it was to make the product props to a value that would make it skip the checks entirely. Unfortunately, changing that value removed the slider settings, broke the slider camera, and for some, stopped the stock camera from working. I have checked an all expected settings are in the menu, safetynet passes, the slider works, the stock camera works.
Great, all works, no problem with camera or slider settings.
PWn3R said:
Mine never stopped working before, however, this works completely differently. This inserts a script into the boot process that happens before the device starts launching system services that changes the ro.boot.hwc and ro.boot.hwcountry to be "global". The other way I was doing it was to make the product props to a value that would make it skip the checks entirely. Unfortunately, changing that value removed the slider settings, broke the slider camera, and for some, stopped the stock camera from working. I have checked an all expected settings are in the menu, safetynet passes, the slider works, the stock camera works.
Click to expand...
Click to collapse
Eggcellent!!! lol... so just flash with twrp and that's it?
Yes, flash Magisk, 18.0 and 18.1 don't work for me. Use 17.3 and then flash this and you should be golden.
i dont know who created this, but this was shared on a Mi Mix3 FB group from PH.
Magisk-v18.1_mix3专版
bluviper said:
i dont know who created this, but this was shared on a Mi Mix3 FB group from PH.
Magisk-v18.1_mix3专版
Click to expand...
Click to collapse
does this work on chinese device with chinese rom or xiaomi eu rom?
I have got it working on chinese device with xiaomi.eu rom.
xterminater07 said:
does this work on chinese device with chinese rom or xiaomi eu rom?
Click to expand...
Click to collapse
I can confirm that works, I already flashed
Inviato dal mio MIX 3 utilizzando Tapatalk
yes, its working on EU ROM coz im on Mi-Globe which is based on EU ROM.
bluviper said:
yes, its working on EU ROM coz im on Mi-Globe which is based on EU ROM.
Click to expand...
Click to collapse
Why would you use it on the EU/Mi-Globe?
Mackay53 said:
Why would you use it on the EU/Mi-Globe?
Click to expand...
Click to collapse
before, V18.0 wont work with mix3.
no matter how you install it. only 17.3 works
as of the moment, since the week before the Chinese New Year, there are no updates from mi-globe. until this weekend. so this is a good alternative to make v18 work with mix3.
bluviper said:
before, V18.0 wont work with mix3.
no matter how you install it. only 17.3 works
as of the moment, since the week before the Chinese New Year, there are no updates from mi-globe. until this weekend. so this is a good alternative to make v18 work with mix3.
Click to expand...
Click to collapse
What benefits do v18 make over v17.3?
Mackay53 said:
What benefits do v18 make over v17.3?
Click to expand...
Click to collapse
Other than a new magisk manager interface I don't notice any difference.
954wrecker said:
Other than a new magisk manager interface I don't notice any difference.
Click to expand...
Click to collapse
That's what I was thinking but people seem to really want to install it, I'm still on 17.1 as that's what comes with twrp.
I haven't tested 18.1 as posted above, but 17.3 is the latest working released version for global.
PWn3R said:
I haven't tested 18.1 as posted above, but 17.3 is the latest working released version for global.
Click to expand...
Click to collapse
Most people on telegram are now using 18.1 , apparently support for modules will end soon for 17.
The released 18.0 and 18.1 do not work on the mix 3. I have no idea if the one linked above does, but I also don't know what they modified which is why I was advising 17.3
Sent from my Mi MIX 3 using Tapatalk
PWn3R said:
The released 18.0 and 18.1 do not work on the mix 3. I have no idea if the one linked above does, but I also don't know what they modified which is why I was advising 17.3
Sent from my Mi MIX 3 using Tapatalk
Click to expand...
Click to collapse
its working. some of the others guys here installed it.
they said its working. i for one, installed, and its working.
based on the screen capture i posted. you can see a logo of xda, maybe they are a part of it somehow.
moreover, there are tons of bulleted changelogs for the 18.0 & 18.1
some of them may not be noticeable for a very large audience, but this "i guess" will make it future proof for the reason of rom updates and compatibility. since Android Q is in the works.
also, noticed these changes
Code:
v18.1
- [General] Support EMUI 9.0
- [General] Support Kirin 960 devices
- [General] Support down to Android 4.2
- [General] Major code base modernization under-the-hood
other changes are for MagiskHide, maybe to better hide other apps. because there are some few apps that still can detect rooted devices even if they are HIDDEN.
As i haven't seen anyone posting it on xda, so
A new MIUI 11 debloated rom based on china dev from MI5s port.
Its quite stable.
Changelog:
The first public version of MIUI 11.
Updated IF Design award winning interface design.
Improved transition animations.
Updated Always On Display mode for devices with AMOLED screens: added new styles and animations for notifications.
The Connections section has been updated with MIUI proprietary features: Printing, Broadcasting, and Mi Share.
Added dynamic ringtones.
Added the ability to choose a desktop style: regular and from the application menu.
System optimization. Error correction.
download link :
https://sourceforge.net/projects/miroom/files/9.9.26/Mi5-PORT_MIUI_9.9.26_MiRoom_8.0.0.zip
dev link:
https://portal.mi-room.ru/roms/
Can i flashing with global rom directly?
taka2no said:
Can i flashing with global rom directly?
Click to expand...
Click to collapse
yes. twrp is needed, you can give it a try, but do backup first, remove magisk and all modules. but recommended is clean flash.
I downloaded from mi forum
So far so good everything works like a charm but battery cant last whole day
On 4.4 kernel i can archive 2 day straight without charging, on the same battery unit now
sunilromy said:
yes. twrp is needed, you can give it a try, but do backup first, remove magisk and all modules. but recommended is clean flash.
Click to expand...
Click to collapse
Thanks for your help. ? Right now testing on battery consuming.
Full Screen Gesture
Everything works fine but how to enable full screen gestures?
wildanw2 said:
Everything works fine but how to enable full screen gestures?
Click to expand...
Click to collapse
Go to Setting/Additional Settings/Full Screen display/select full screen gesture
So I've testing ever since and THERE'S HUGE BUG
gyroscope isn't working properly, auto rotate works fine (magnetic sensor)
But when i play games with gyro uses such as PUBG it drift away so hard
Perhaps its caused by broken persist.img ?
Or it caused by the rom itself?
Btw has anyone tried custom kernel in this rom? Core control kinda fu*ked up it closes core 3 even when thermal protection disabled
Samir96 said:
So I've testing ever since and THERE'S HUGE BUG
gyroscope isn't working properly, auto rotate works fine (magnetic sensor)
But when i play games with gyro uses such as PUBG it drift away so hard
Perhaps its caused by broken persist.img ?
Or it caused by the rom itself?
Btw has anyone tried custom kernel in this rom? Core control kinda fu*ked up it closes core 3 even when thermal protection disabled
Click to expand...
Click to collapse
Hello,
I did check gyroscope, its working fine. You can see attached pic. but i dont pubg. I have used various custom roms. i usuallly get 5.30 to 6.30 hrs SOT in customs roms. but in miui roms, mostly i got 5hrs of SOT. but just of camera and stuff, i am using miui. As portrait mode and camera optimization is best in MIUI.
No custom kernel i have tried yet.
Samir96 said:
Go to Setting/Additional Settings/Full Screen display/select full screen gesture
Click to expand...
Click to collapse
There is no such setting on 9.9.26.
Sent from my MI 5 using Tapatalk
wildanw2 said:
There is no such setting on 9.9.26.
Click to expand...
Click to collapse
You sure bro?
sunilromy said:
Hello,
I did check gyroscope, its working fine. You can see attached pic. but i dont pubg. I have used various custom roms. i usuallly get 5.30 to 6.30 hrs SOT in customs roms. but in miui roms, mostly i got 5hrs of SOT. but just of camera and stuff, i am using miui. As portrait mode and camera optimization is best in MIUI.
No custom kernel i have tried yet.
Click to expand...
Click to collapse
I guess so, maybe its Pubg related problem.
Btw for core problem, i use AKT tweak and it solved
Using battery saving mode from AKT give me futher SOT and insane idle time. Highly recommended
And lastly, it seems a lot of apps not being optimized (doze), can be fix by install hidden miui settings app and manually optimize those apps
Samir96 said:
You sure bro?
Click to expand...
Click to collapse
On the previous version, yes there is that setting. After upgraded to 9.9.26, it is disappeared.
Sent from my MI 5 using Tapatalk
wildanw2 said:
There is no such setting on 9.9.26.
Click to expand...
Click to collapse
Its kinda weird because im on eu 9.9.26 beta
hello,
.you need to enable onscreen navigation to show full screen gesture option.
you can manually do it by
root explorer (you need to modify system file)
1. Go to /system/build.prop and add qemu.hw.mainkeys=0
sunilromy said:
hello,
.you need to enable onscreen navigation to show full screen gesture option.
you can manually do it by
root explorer (you need to modify system file)
1. Go to /system/build.prop and add qemu.hw.mainkeys=0
Click to expand...
Click to collapse
It works, thank you.
Sent from my MI 5 using Tapatalk
so. is that a patch for mipay?
Flashing in MI5
You have mentioned that this ROM is for MI5s, will I be able to flash this ROM to my MI5 device?
https://sourceforge.net/projects/mi...5-PORT_MIUI_9.10.10_MiRoom_8.0.0.zip/download
Here is the updated version
kaziupal said:
https://sourceforge.net/projects/mi...5-PORT_MIUI_9.10.10_MiRoom_8.0.0.zip/download
Here is the updated version
Click to expand...
Click to collapse
Changelog???