Develop Bugs

[ROM][ALL QUARK][5.X.X]FlymeOS 5.1.x.xxR

She's very good, I'm using a few days and actually the most fluid I've used on my device.
It is based on Cyanogen so it's compatible with Android Kernel BHB L
Flyme OS ROM
Download the rom the link below
https://mega.nz/#!Z5RTUAQJ!u3jw3Uadja0yBdztPrO0zBW_mnxrn31dCadkAfUgino
download GAPPS in opengapps.org VERSION 5.1.1
Download the BHB Kernel L:
https://www.androidfilehost.com/?fid=24531035584725051
( Optional ) (Recommended)
Download BHB Aduitor MOD:
https://www.androidfilehost.com/?w=files&flid=48767
( Optional ) (Recommended)
After downloading the files do the following process.
Do FlymeOS the zip flash only it will take a while and reset the unit, wait 30 seconds it will not start will hang on screen FlymeOS.
Hold volume - and power button until the device restarts, oh yes it will begin to optimize applications.
Set it to go to the Home screen, unplug it and plug in recovery (TWRP).
Make flash Do GAPPS BHB + L + Kernel BHB Aduitor MOD and then reboot and the device will optimize applications.
Ready-ROM is ready to be used, in Chinese applications you can erase with titanium backup.
If you do not like the home screen use the new launcher.
If you have any questions post that answer quickly.
Please do not delete the topic, the room is very good.
I think she deserves a little attention.
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry my English'm not very good.
Status: Stable
Update: 09/08/2017

Is this version of Flyme different from this other one for Quark that got shut down immediately by mods due to Chinese malware? You also posted that one.
http://forum.xda-developers.com/moto-maxx/development/rom-flymeos-4-5-4-5r-t3298039
I'm not making any accusations, I am merely asking a question. You're sure this is OK?

ChazzMatt said:
Is this version of Flyme different from this other one for Quark that got shut down immediately by mods due to Chinese malware? You also posted that one.
http://forum.xda-developers.com/moto-maxx/development/rom-flymeos-4-5-4-5r-t3298039
Click to expand...
Click to collapse
It has malware that I posted, I'm using with some users and so far only praise.
So I'm using it right now.

hpbrasil said:
It has malware that I posted, I'm using with some users and so far only praise.
So I'm using it right now.
Click to expand...
Click to collapse
You posted both versions here in this forum (one current, and one closed down) -- so let's differentiate between the two. I understand English is not your first language (my wife is Brazilian), and I understand some syntax/wording can lead to confusion. But your statement above can have two meanings. So, let's try again.
This version right now -- in this thread -- has malware? or does not?

ChazzMatt said:
You posted both, so let's differentiate between the two.
This one right now in this thread has malware? or does not?
Click to expand...
Click to collapse
This segment is not malware, right?
Previously I posted directly from Flyme server only it was closed because of it.
Then an acquaintance in XT1225 community removed the malware and uploaded it to use it there.

hpbrasil said:
This segment is not malware, right?
Previously I posted directly from Flyme server only it was closed because of it.
Then an acquaintance in XT1225 community removed the malware and uploaded it to use it there.
Click to expand...
Click to collapse
Thank you. That's the clarification I was looking for. :good:

nice rom man

pedretti said:
nice rom man
Click to expand...
Click to collapse
Yeah

Yes rom is very stable even wifi signals are very storng as compare to cm 13 rom i loved it a i use the rom about a month
the only problem so i go back to the cm 13 is aftar a month when i restart the phone it got stuck boot img and a min its got restart and again boot loop i fix the problem while wipe the cache but after again restart its get into bootloop so if u restart the phone it will get stuck in boot loop i reinstall the rom its worked fine for some time again problem is start..
Sorry for bad english

Lonely khan said:
Yes rom is very stable even wifi signals are very storng as compare to cm 13 rom i loved it a i use the rom about a month
the only problem so i go back to the cm 13 is aftar a month when i restart the phone it got stuck boot img and a min its got restart and again boot loop i fix the problem while wipe the cache but after again restart its get into bootloop so if u restart the phone it will get stuck in boot loop i reinstall the rom its worked fine for some time again problem is start..
Sorry for bad english
Click to expand...
Click to collapse
I do not have this problem, I'm using it since launch and ta quiet

ChazzMatt said:
Is this version of Flyme different from this other one for Quark that got shut down immediately by mods due to Chinese malware? You also posted that one.
http://forum.xda-developers.com/moto-maxx/development/rom-flymeos-4-5-4-5r-t3298039
I'm not making any accusations, I am merely asking a question. You're sure this is OK?
Click to expand...
Click to collapse
its differnet as well this one is flyme 5 other he posted before was flyme 4 this one is stable but on bug if u use themes nd install lots of apps nd restart the rom it will get stuck into bootloop
---------- Post added at 10:45 AM ---------- Previous post was at 10:40 AM ----------
hpbrasil said:
I do not have this problem, I'm using it since launch and ta quiet
Click to expand...
Click to collapse
are you using different themes as well ??

hpbrasil said:
I do not have this problem, I'm using it since launch and ta quiet
Click to expand...
Click to collapse
The issues Meizu shop did not accept, does not know for what reason, already researched to know and also do not get results .... I'm thinking that only accept the official system devices will search a little more.

Can you add some more features and screenshot. I want to know what i am flashing before i flash. Also mention the major bugs

you gotta give it to Meizu, Flyme is a real eye candy but it have its downs, i've been using it for a couple of days already and i can see its elegance and eye candy, the bad thing about it is that it tries hard to emulate the iPhone in some aspects, in some other areas excels but it tries to hard to be an iOS replacement that it feels like a copycat of iOS. i will be posting a more in depth review about this room soon.

Isso This ROM discontinued?

Jonanthan Nascimento said:
Isso This ROM discontinued?
Click to expand...
Click to collapse
Waiting version 6

Closed by request
Thread re-opened - OP request

Flyme ROM Update V5.1.10.24R
https://mega.nz/#!AgoFCJCC!vTpu_JlUZdqqq1LagPdGf2XrztoYvFHxjKAP57FKSb4
Corrections:
Battery improvements
Launcher improvements
BT correction (drainage)
Boot Enhancements
ROM Kernel Stock enhancements
Fixed on some devices that were rebooted.
Update blobs (The latest 5.x.x posts are added)
Improvements in Wifi Signal and STK consumption
This is the last update for this rom.
Rom is based on CM12.1 (5.1.1 Modified)

hpbrasil said:
Flyme ROM Update V5.1.10.24R
https://mega.nz/#!AgoFCJCC!vTpu_JlUZdqqq1LagPdGf2XrztoYvFHxjKAP57FKSb4
Corrections:
Battery improvements
Launcher improvements
BT correction (drainage)
Boot Enhancements
ROM Kernel Stock enhancements
Fixed on some devices that were rebooted.
Update blobs (The latest 5.x.x posts are added)
Improvements in Wifi Signal and STK consumption
This is the last update for this rom.
Rom is based on CM12.1 (5.1.1 Modified)
Click to expand...
Click to collapse
Nice to see that ROM get an update again. Thanks for your work @hpbrasil

Thanks a lothpbrasil. I´ll try it later... Looks great!

Question Open Beta 2

On Oxygen Updater Open Beta 2, thanks to Abdul B.!
For me the update is incremental, Size is 660 mb.
For me was 693 Mb (in Oxygen Updater was set to Open beta (full) ). I'm not unlocked, rout-ed.
There is no full dowload link yet.
Open Beta is Global. So don't ask for european or other region.
OnePlus 9 Pro (Except IN) This is the global version Open Beta 1
Download Open Beta 2 with Oxygen updater..​Install by upgrade Open Beta 1​
Official post:
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
Hey everyone,
Here is the Open Beta 2 for the OnePlus 9 and OnePlus 9 Pro! The current Open Beta 1 users will receive this build push gradually.
Please bear in mind that this is beta software and, as such, may be less stable than stable MP builds. If you are installing this build, we highly recommend you make a full system backup before proceeding.
Key updates
System
Optimized the fluency of the status bar
Optimized battery life and charging speed
Fixed the low-probability issue of the status bar not displaying apps
Fixed the low-probability issue of automatic brightness failing
Fixed the issue of some desktop widgets displaying abnormally
Fixed the issue of Cloud service not opening in Notes
Updated Android Security Patch to 2021.11
Improved system stability
Camera
Improved app stability
Bluetooth
Fixed the low-probability issue of the status bar not displaying the battery of Bluetooth earphones
Know issues
Auto-rotate for desktop may be delayed under some using scenes
Probable issue of WLAN automatically disconnected
The camera will freeze when taking videos in 4K 60hz mode
Notifications for some apps will automatically be switched on
Global Search may not response
Background Apps may automatically switch off under the using scene of low RAM
Please note: These instructions are only for the OnePlus 9 and 9 Pro. Please make sure the battery level is above 30% and a minimum of 3GB storage space is available.
MP version = Stable official version
OBT version = Open Beta Version
OBT2 will be upgraded from the OBT1 build. You need to upgrade OBT 1 first if you wish to try OBT2. You will get an upgrade notification after installing OBT1.
Wish to upgrade to OBT1 from MP version? Please click this link:
OxygenOS 12 Open Beta 1 for the OnePlus 9 and OnePlus 9 Pro (Please read the content about OBT1 upgrade)
Wish to roll back from OBT2 to MP version? Please click this link
OxygenOS 12 Open Beta 1 for the OnePlus 9 and OnePlus 9 Pro (Please read the content about rollback)
Note:
1. Please keep in mind that this is still beta software which may cause instability. By installing this update, you accept the potential risks.
2. As always, your feedback is appreciated. For Indian users, please type *#800# in the Phone App to switch on the Feedback App and submit the feedback. For users from other regions, feel free to share your product suggestions via the Feedback option in the Community app. If you don't have the Community app installed on your device, feel free to download it HERE. You can check here for more information on the integrated Feedback tool.
Do try out the new Feedback tool and if you have any questions or need help, please contact [email protected].
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Make sure to let us know how you feel about the beta builds here in the thread too, we look forward to reading your feedback.
Never Settle.

I see a bug with Face Unlock. Brightness in dark room never works.

wtf, Texts and calls might not be able to be received, a realy bad joke from Oneplus this first open beta.

denzel09 said:
I see a bug with Face Unlock. Brightness in dark room never works.
Click to expand...
Click to collapse
That hasn't worked since OxygenOS11 on both the OnePlus 7 Pro and OnePlus 9 Pro, I submitted it as a bug for both, never been fixed.

Hot-Proton said:
wtf, Texts and calls might not be able to be received, a realy bad joke from Oneplus this first open beta.
Click to expand...
Click to collapse
"MIGHT"

djsubterrain said:
That hasn't worked since OxygenOS11 on both the OnePlus 7 Pro and OnePlus 9 Pro, I submitted it as a bug for both, never been fixed.
Click to expand...
Click to collapse
Not really true imho, i have op9 pro and that option always worked well with android 11 until tonight when i updated to ob1.

Does magisk work with this beta?

For me Ob1 works .
Oxygen contacts, phone not working on Android 12. I miss it for "Rise the phone to answer a call" gesture.
Also missing the option to restart to recovery (not in developer mode neither). I wanted to wipe cache in recovery.
For the first time since OnePlus 8 Pro & now on 9 Pro i got 5g on settings. See screenshot.
In camera app xPan is moved to Settings.

null0seven said:
Also missing the option to restart to recovery (not in developer mode neither). I wanted to wipe cache in recovery.
Click to expand...
Click to collapse
In ob1 recovery no wipe cache present. Turn of your phone and press volume down and power for reboot. Uniquely wipe date present

Anybody manage to access engineer mode on this version? Dialer codes no longer exist and its using a different app now. Cant launch from shortcut master anymore either.

jwarrior319 said:
Anybody manage to access engineer mode on this version? Dialer codes no longer exist and its using a different app now. Cant launch from shortcut master anymore either.
Click to expand...
Click to collapse
*#899# will open it, but it's encrypted and most functions are locked.
Now it requires login to OPPO server for decryption (allawnos.com... interesting name, isn't it?)

c3drik 67 said:
In ob1 recovery no wipe cache present. Turn of your phone and press volume down and power for reboot. Uniquely wipe date present
Click to expand...
Click to collapse
I think in android 12 there is no more that option

Anyone know if I install open beta version and then stable is released, do I have to rollback to 12 stable (wiping data), or will that just be a regular update?

AndroPlus said:
*#899# will open it, but it's encrypted and most functions are locked.
Now it requires login to OPPO server for decryption (allawnos.com... interesting name, isn't it?)
Click to expand...
Click to collapse
Thats not the menu i need. Im looking to change bandmode and RAT lock.

I installed the Beta 1, however, I also have Visible wireless, a Verizon MVNO.
I had to go back to Android 11 because of no cell service.
Is this a common issue? I didn't see anywhere that Verizon won't work on Beta 1.
What I saw looked nice on Beta 1 hopefully a fix comes along.
Verizon in my area gives the best coverage TMO & AT&T are only ok.

This beta is not worth installing it is a waste of time, too many bugs. It is better to wait for a stable version.
You will go back to Android 11 for sure

The Good: 5G option is available in the settings.
The Bad: Notification badges on status bar are bugged they don't showup specifically AFWall Firewall Service and Outlook.
Brave Browser doesn't open.
Closing all apps at once is buggy results in unexpected behavior.
Stock Camera app doesn't open have to install Gcam Instead.
Other than those issues it's fine for daily use.

vangry2020 said:
The Good: 5G option is available in the settings.
The Bad: Notification badges on status bar are bugged they don't showup specifically AFWall Firewall Service and Outlook.
Brave Browser doesn't open.
Closing all apps at once is buggy results in unexpected behavior.
Stock Camera app doesn't open have to install Gcam Instead.
Other than those issues it's fine for daily use.
Click to expand...
Click to collapse
Literally none of those happen on my phone. I'd recommend you factory reset and test again. The only issue I've had so far is this morning when my alarm went off I didn't get the pop-up to dismiss / snooze it and had to restart my phone. Everything else is working as expected

jwarrior319 said:
Thats not the menu i need. Im looking to change bandmode and RAT lock.
Click to expand...
Click to collapse
It's in locked menu, so unfortunately no way to use for now...

Should you do a full wipe before installing the beta

[ROM][12 CBT 01][OFFICIAL][BETA]Color OS 12[Oneplus 8 PRO]

Moderator Information
Always be caution when you flash files. Be sure to understand how to backup and rescure yoru device in case of flash failure or something happened. It is the general rule for every flash lover.
Click to expand...
Click to collapse
Color OS 12 CBT 1
Android 12
Only for OnePlus 8 PRO
Spoiler: MSM tools for all 1+ version, please use only for your version IN...
Unbrick/Msm tools for Oneplus Smartphones – Complete Collection
Unbrick/Msm tools can restore any Oneplus smartphone to factory image/Stock OS. In the post, we will be adding all the Unbrick/Msm tools for all the Oneplus smartphones and the list will keep updating whenever Oneplus launches a new Smartphone. Join Techibee Telegram Channel Join Now WhatsApp...
techibee.in
Spoiler: Fingerprint Fix
Just installing ColorOSMagisk-v1.2 module and reboot device.
微博
随时随地发现新鲜事！微博带你欣赏世界上每一个精彩瞬间，了解每一个幕后故事。分享你想表达的，让全世界都能听到你的心声！
m.weibo.cn
Spoiler: Color OS 12
1. Backuped your persist before flashing!
OnePlus 8P how to quickly falsh into ColorOS 12
First you download the MSM Tool of Hydrogen OS
Link: https://yun.daxiaamu.c…8C%85%E6%B0%A211.0.4.4
After the flashing is complete, download Hydrogen OS 11.0.13.13
Select local upgrade, select the downloaded package, and perform OTA upgrade
Link: https://yun.daxiaamu.c…ro/%E6%B0%A211.0.13.13
Then download ColorOS 12 CBT 1
Select local upgrade, select the downloaded package, and perform OTA upgrade
OnePlus 8Pro ColorOS 12 CBT 1
link： https://otaafsc-cost.h…555_e253ead2c7ae5e.zip
Restart the phone after installing 100%
Spoiler: Root
- Unlock Bootloader
- Download and extract ColorOS-12_ROOT_8Pro.zip
- Reboot to bootloader
- Run coloroot.bat
- Done
Spoiler: Sim FIX
If You just booted into ColorOS 12 on 8 Pro and have no signal or other sim issues..
Extract the zip and run simfix.bat from fastboot
SimFix_OnePlus8Pro_ColorOS12
https://mega.nz/file/I…Lzi3cliDjvf0U1BxvlE_og
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Downloading right now. Any screenshots?

xtcislove said:
Downloading right now. Any screenshots?
Click to expand...
Click to collapse
Added a screenshot to the first topic.
I have not installed it yet, describe pls your experience later.

zloynavseh said:
Added a screenshot to the first topic.
I have not installed it yet, describe pls your experience later.
Click to expand...
Click to collapse
First things first: Thanks for your work.
Everything is working fine but its too much beta to test it as a daily driver.
What i have to say is, i like the new ui overall BUT the OOS11 UI is so much cleaner an i prefer it over any other ui.
-On first boot the numbers to enter my sim code where to big and i couldnt reach the enter key, a reboot fixed it.
No playstore preinstalled.
-Root is working fine
-USB debugging, pc connection has some problems
-Overall it feels good
-It looks and feels clean but i prefer oos look and feel
-Fingerprint animation is awesome
Going back to OOS11 in 10 minutes, you might have some questions first?

More screenshots

xtcislove said:
More screenshots
Click to expand...
Click to collapse
Thx, can you delete part of screenshots with you phone number, ore just smear over it.
Did you check safetynet and GPAY? Is fingerprint works fine?

Oh nice!!! @zloynavseh
I just saw the sim fix. (Last time I test got no-sim error too.)

zloynavseh said:
Thx, can you delete part of screenshots with you phone number, ore just smear over it.
Did you check safetynet and GPAY? Is fingerprint works fine?
Click to expand...
Click to collapse
Yeah thanks didnt saw the number there.
Didnt checked safetynet but gpay was working fine. Fingerprint was working as good as in oos11.

xtcislove said:
First things first: Thanks for your work.
Everything is working fine but its too much beta to test it as a daily driver.
What i have to say is, i like the new ui overall BUT the OOS11 UI is so much cleaner an i prefer it over any other ui.
-On first boot the numbers to enter my sim code where to big and i couldnt reach the enter key, a reboot fixed it.
No playstore preinstalled.
-Root is working fine
-USB debugging, pc connection has some problems
-Overall it feels good
-It looks and feels clean but i prefer oos look and feel
-Fingerprint animation is awesome
Going back to OOS11 in 10 minutes, you might have some questions first?
Click to expand...
Click to collapse
i wasn't able to get root working, could you give a quick instruction?

conquistadore.11 said:
i wasn't able to get root working, could you give a quick instruction?
Click to expand...
Click to collapse
-Unlock Bootloader
-Download and extract ColorOS-12_ROOT_8Pro.zip from first post.
-Reboot to bootloader
-Run coloroot.bat
Done.

What are the chances of this build getting an OTA update since it is a closed beta one?

gsser said:
What are the chances of this build getting an OTA update since it is a closed beta one?
Click to expand...
Click to collapse
Chance more than colorOS 11. Open beta will staring Q1'22.

I'm currently on OOS 11.0.9.9 and directly flashed the CBT through local upgrade. Everything is working fine except fingerprint. All my apps are retained no issues like data loss, no chinese bloatware.

manojkumarn said:
I'm currently on OOS 11.0.9.9 and directly flashed the CBT through local upgrade. Everything is working fine except fingerprint. All my apps are retained no issues like data loss, no chinese bloatware.
Click to expand...
Click to collapse
Did you backuped your persist before flashing? If you didn't do it, I have bad news for you, you will have great difficulty in restoring it! Try to load backup.

zloynavseh said:
Did you backuped your persist before flashing? If you didn't do it, I have bad news for you, you will have great difficulty in restoring it! Try to load backup.
Click to expand...
Click to collapse
Same problem here. I have the persist.img backed up from OOS but replacing data and engineermode folders didn't seem to help

The region are Chinese,, ( on settings, or Europe ?).

conquistadore.11 said:
Same problem here. I have the persist.img backed up from OOS but replacing data and engineermode folders didn't seem to help
Click to expand...
Click to collapse
Did you unblock your Bootloader? Sometimes it's happening when you unblock it.

zloynavseh said:
Did you unblock your Bootloader? Sometimes it's happening when you unblock it.
Click to expand...
Click to collapse
yeah it's unlocked atm. should i re-lock and try again?

xtcislove said:
More screenshots
Click to expand...
Click to collapse
大侠阿木云盘 | 一加手机官方ROM下载
OLAINDEX,Another OneDrive Directory Index
yun.daxiaamu.com

conquistadore.11 said:
yeah it's unlocked atm. should i re-lock and try again?
Click to expand...
Click to collapse
1. Change to Hydrogen OS via MSM, check fingerprint, if it broken resolve via backup persist. Then update Hydrogen.
2. Flashing via MSM Color OS 12 again

Question "Query" ProtonAosp

Id like to stay with pixel instead of having to sell and then buy a new phone, just hassle, but iv seen proton is a very good ROM to run, my issues are with updates, how would you update the proton ROM? And is it easy enough to revert back to stock if needed?
Thanks.

If you want more privacy and security, as well as regular updates, GrapheneOS is an excellent option. Not sure the Proton ROM has OTA-like updates though

kevinireland11 said:
Id like to stay with pixel instead of having to sell and then buy a new phone, just hassle, but iv seen proton is a very good ROM to run, my issues are with updates, how would you update the proton ROM? And is it easy enough to revert back to stock if needed?
Thanks.
Click to expand...
Click to collapse
Graphene is a privacy based rom that lacks some crucial functionality if you need everything running. This is according to various posts on here and Reddit. Some people love it, and I'm sure some don't. I saw someone that liked it a lot but had to roll back because they couldn't get something or other working. But it depends on your needs.
As for Proton there is no OTA but updates are posted and they are a simple web install that takes about 4 or 5 minutes. Nothing is wiped if you are updating. After installing you can relock the bootloader if you want but that's another wipe as I'm sure you know. This is a very stock rom with a lot of tweaks in the background. FPR for one. It's much quicker although not perfect yet. Also the latest version is the December build with all security and most features enabled. One difference, of many, is that call screening is still available on this build. Call on hold is not. I flashed this rom and then installed the November radio over it since it does come with the crappy December radio. It's way better, I don't lose signal very much although I still do occasionally. Bottom line I like it and would have a hard time going back to stock. I'm not rooted and after the next update I might relock the bootloader, wipe the device and leave it at that.
Reverting to stock is the same as with any other custom rom. You can web install stock or manually fastboot it. Not a difficult process.

bobby janow said:
Graphene is a privacy based rom that lacks some crucial functionality if you need everything running. This is according to various posts on here and Reddit. Some people love it, and I'm sure some don't. I saw someone that liked it a lot but had to roll back because they couldn't get something or other working. But it depends on your needs.
As for Proton there is no OTA but updates are posted and they are a simple web install that takes about 4 or 5 minutes. Nothing is wiped if you are updating. After installing you can relock the bootloader if you want but that's another wipe as I'm sure you know. This is a very stock rom with a lot of tweaks in the background. FPR for one. It's much quicker although not perfect yet. Also the latest version is the December build with all security and most features enabled. One difference, of many, is that call screening is still available on this build. Call on hold is not. I flashed this rom and then installed the November radio over it since it does come with the crappy December radio. It's way better, I don't lose signal very much although I still do occasionally. Bottom line I like it and would have a hard time going back to stock. I'm not rooted and after the next update I might relock the bootloader, wipe the device and leave it at that.
Reverting to stock is the same as with any other custom rom. You can web install stock or manually fastboot it. Not a difficult process.
Click to expand...
Click to collapse
Hey I just tried there now and I unlocked the bootloader but it keeps saying about available space and if I'm using an incognito browser? Is there a specific browser I need to use to do this, I tried chrome and edge? Says I need 5gb available, my pc has like 1TB, any suggestions

kevinireland11 said:
Hey I just tried there now and I unlocked the bootloader but it keeps saying about available space and if I'm using an incognito browser? Is there a specific browser I need to use to do this, I tried chrome and edge? Says I need 5gb available, my pc has like 1TB, any suggestions
Click to expand...
Click to collapse
What about not incognito? I heard there was some limits on that space wise.

bobby janow said:
What about not incognito? I heard there was some limits on that space wise.
Click to expand...
Click to collapse
I wasn't on incognito though, iv seen someone else with this issue to, I'm not sure I posted about this issue in the telegram proton group

kevinireland11 said:
I wasn't on incognito though, iv seen someone else with this issue to, I'm not sure I posted about this issue in the telegram proton group
Click to expand...
Click to collapse
I'll head over there now. I did see that a day or so ago.
edit: looks like the problem arises if you have multiple profiles on Chrome. I think the manual install is not that difficult though if you still run into problems. Flashall.bat -w to wipe the device then flashall.bat to install the rom. Don't do a thing until it's done. It's tempting because you get a fastboot menu allowing you to restart the device. Don't do it let the rom install direct you. I actually forgot if it's an auto reboot into the rom or finally the rom instructs you to reboot. But it should be pretty clear.

bobby janow said:
I'll head over there now. I did see that a day or so ago.
edit: looks like the problem arises if you have multiple profiles on Chrome. I think the manual install is not that difficult though if you still run into problems. Flashall.bat -w to wipe the device then flashall.bat to install the rom. Don't do a thing until it's done. It's tempting because you get a fastboot menu allowing you to restart the device. Don't do it let the rom install direct you. I actually forgot if it's an auto reboot into the rom or finally the rom instructs you to reboot. But it should be pretty clear.
Click to expand...
Click to collapse
I'll remove my account and see how that goes, I even installed chromium and didn't work, but I'll try again later

kevinireland11 said:
I'll remove my account and see how that goes, I even installed chromium and didn't work, but I'll try again later
Click to expand...
Click to collapse
Maybe you can borrow a computer from an associate for about 5 minutes? Worth a try. Good luck let us know how you made out.

kevinireland11 said:
Hey I just tried there now and I unlocked the bootloader but it keeps saying about available space and if I'm using an incognito browser? Is there a specific browser I need to use to do this, I tried chrome and edge? Says I need 5gb available, my pc has like 1TB, any suggestions
Click to expand...
Click to collapse
Are you using a VPN by chance? VPN are known to cause issues with wireless devices trying to connect (printers, Sonos (audio), debugging, et cetera), since your two favored toys can't "find" each other any more.

Can anyone currently using this ROM try out the translate function from the screen shot menu? I included a screen shot of how it normally presents with the results after selecting translate.
Also if you test it, there needs to be enough of a foreign language on the screen and also it might not trigger of it has your default language on the screen mixed in
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also just in case don't open those links lol. It's all investment scams. I just needed a message with enough Korean in it.

General Android 13

Hi guys,
few weeks ago, the Xperia 10 IV of my girlfriend got Android 13. After the update, the device works fine, with some new features (as the possibility to choose between set of colors for the UI).
From this page on the Sony website, it seems that also our device will be updated in the next future:
Xperia 10 III XQ-BT52/HQ-BT52 | Help Guide | Changes after updating the software to Android 13
have a nice day!

code010101 said:
Hi guys,
few weeks ago, the Xperia 10 IV of my girlfriend got Android 13. After the update, the device works fine, with some new features (as the possibility to choose between set of colors for the UI).
From this page on the Sony website, it seems that also our device will be updated in the next future:
Xperia 10 III XQ-BT52/HQ-BT52 | Help Guide | Changes after updating the software to Android 13
have a nice day!
Click to expand...
Click to collapse
ok, so who's first?
Xperia 10 III (XQ-BT52) - CUSTOMIZED EEA
The latest software and firmware versions for the Xperia 10 III (XQ-BT52) XperiCheck.com checks the Sony servers every 5 minutes to always display the latest information.
xpericheck.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

what the hell, life's too short to wait 🫠
so far so good..

czekker said:
what the hell, life's too short to wait 🫠
so far so good..
Click to expand...
Click to collapse
how did you turn on the volte indicator?

liwetlt said:
how did you turn on the volte indicator?
Click to expand...
Click to collapse
Well, I'm not sure I did - as far as I remember it showed up when my network turned it on.
And of course I've got this (I think it's on by default):

czekker said:
Well, I'm not sure I did - as far as I remember it showed up when my network turned it on.
And of course I've got this..:
View attachment 5837295
Click to expand...
Click to collapse
Volte also works for me, but there is no indication like yours

Installed it an hour ago, everything works smooth so far. Love it much more than Android 12!

Same here: after 2 days, no problems

I have two XQ-BT52.
One of them got Android 13 (62.2.A.0.367) as OTA update earlier this week......and for the other identical device the update is not available. I check for system updated but it still claims I'm on latest release when still on 62.1.A.0.675
Strange, isn't it?

pernor998 said:
I have two XQ-BT52.
One of them got Android 13 (62.2.A.0.367) as OTA update earlier this week......and for the other identical device the update is not available. I check for system updated but it still claims I'm on latest release when still on 62.1.A.0.675
Strange, isn't it?
Click to expand...
Click to collapse
do they have the same operator?

code010101 said:
do they have the same operator?
Click to expand...
Click to collapse
I've 4 different operators from 3 countries in the SIM-slots of my two phones
....but I downloaded new rom with XperiFirm and flashed with newflasher so both phones are at same release now
(removed all .at-files and userdata-sin when flashing and it worked just fine )

pernor998 said:
I've 4 different operators from 3 countries in the SIM-slots of my two phones
Click to expand...
Click to collapse
this is likely the cause: different operators release the updates in different dates ...
however you worked around the problem!

Hi, I have a problem with uploading android 13 to Xperia 10 III via newflasher, everything seems to be uploading ok but after starting the phone there is a sony logo, a black screen, two vibrations and the sony logo again.

pernor998 said:
I've 4 different operators from 3 countries in the SIM-slots of my two phones
....but I downloaded new rom with XperiFirm and flashed with newflasher so both phones are at same release now
(removed all .at-files and userdata-sin when flashing and it worked just fine )
Click to expand...
Click to collapse
Not all regions received the update, flashing manually from another you will not receive the next update over the air.
Dabronik said:
Hi, I have a problem with uploading android 13 to Xperia 10 III via newflasher, everything seems to be uploading ok but after starting the phone there is a sony logo, a black screen, two vibrations and the sony logo again.
Click to expand...
Click to collapse
did you specify slot a?
newflasher set_active:a

I got the update only this morning, installed few minutes ago, everything seems ok for now

There's a nasty bug in this version (62.2.A.0.367), where collapsing the OSK will abruptly take you to the previously used app if you have previously switched to the current app by the gesture of swiping along the bottom edge of the screen:
Your browser is not able to display this video.
This happens regardless of the keyboard you use (Gboard in the above video, also tested with Simple Keyboard from F-Droid).
Another pain point with this update, and with Android 13 in general, is that you can no longer use separate quick settings tiles for controlling Wi-Fi and Mobile data. In Android 12, it was still possible to bring it back by adding wifi,cell to sysui_qs_tiles. According to a quick search, this no longer works in Android 13 (I didn't bother actually trying it out on the 10 III because I doubt Sony would bring this feature back on their own).

Probably found something not working properly: I use my phone with a polar H10 Heart rate monitor and 3 different apps to monitor my workouts and after the update no app is able to read my heart rate from the H10, while it works fine on another much older phone... te 10 III sees the H10, identifies it properly, pairs to it, but does not read any data: no battery level, no HR, nothing...

Unfortunately Wi-Fi and Data toggle are united once again... If I get to know this before I may not update...

code010101 said:
Hi guys,
few weeks ago, the Xperia 10 IV of my girlfriend got Android 13. After the update, the device works fine, with some new features (as the possibility to choose between set of colors for the UI).
From this page on the Sony website, it seems that also our device will be updated in the next future:
Xperia 10 III XQ-BT52/HQ-BT52 | Help Guide | Changes after updating the software to Android 13
have a nice day!
Click to expand...
Click to collapse
Time to back to Sony ROM!!(I use GSI now)

Great to see our Xperia 10 III finaly got Android 13!
Currently I'm on 62.1.A.0.645 with LOS20 (GSI).
Now I wan't to upgrade firmware/vendor without loosing GSI or any data.
Can anybody tell how this can be done?