Develop Bugs

Secure Booting Error! Cause: boot certification verify

Good day mate. My brick phone is F460S variant. I got this error when I tried to go back to Lollipop using Lg flash tool 2014, it got stuck on 5% and remove usb cable and start again, after that I got this error Secure Booting Error! Cause: boot certification verify.
No download mode
No recovery
anyone can help me please?:crying:

anyone?

You have triggered the downgrade QFUSE. There is nothing you can do apart from trying to unbrick it like it was dead, but that's not guaranteed to work. You should have researched more before attempting this. My prototype doesn't have a QFUSE, so i am free to downgrade via TOT to kitkat or lollipop.

西村大一 said:
You have triggered the downgrade QFUSE. There is nothing you can do apart from trying to unbrick it like it was dead, but that's not guaranteed to work. You should have researched more before attempting this. My prototype doesn't have a QFUSE, so i am free to downgrade via TOT to kitkat or lollipop.
Click to expand...
Click to collapse
What does QFUSE mean?

anmino said:
What does QFUSE mean?
Click to expand...
Click to collapse
I second you on this. I just uninstalled MultiROM and got the secure booting error. Depending on the ROM you have, find a bumped kernel and flash it. Most of the kernels on XDA are pre-bumped unless the developer states so. Boot into recovery, tutorials on the internet, then flash the kernel and voila.

if you can use twrp or you're able to flash, use mr_bump.zip: https://mega.nz/#!DNwhRBrK!Ki6zIzXca0KjPShi6L2oaCYIr0CkmH8sEymEt-0Q3ys
oh sorry, I didn't see "no recovery".

HardStyl3r said:
if you can use twrp or you're able to flash, use mr_bump.zip: https://mega.nz/#!DNwhRBrK!Ki6zIzXca0KjPShi6L2oaCYIr0CkmH8sEymEt-0Q3ys
oh sorry, I didn't see "no recovery".
Click to expand...
Click to collapse
Yes, no DOWNLOAD mode and RECOVERY mode.. Anyone have an idea how to fix this?

anyone?

Hello, i got the same probleme and i've trying a lot of things but not resolved..
My phone is a LG G3 Beat F470s..
Please help us..

Dowblnload adb and fastboot drivers
Download laf.img for your device
Download LG Drivers
Get you G3 to fastboot mode. Hold volume up and connect it to PC
Open fastboot and adb folder in PC, ctrl+shift+right click and open cmd. Type fastboot devices...if ur device is listen then proceed, if not u did not do something cotrectly...if yes just flash laf img to your G3 and voila

I remember me that I was in the same situation:
No TWRP, no download mode, so i have use in pat this thread:
https://forum.xda-developers.com/showthread.php?t=1752270
And an other that i haven't found again (xda thread), in some lines:
=> download the last img file from: https://eu.dl.twrp.me/d855/
=> no download mode available so no possibility to flash manually twrp file from an LG Flash Tool
==> so setup an adb connexion to the phone, cp command to copy the img file on the sdcard or where you want
=> command: "flash recovery twrp-2.8.x.x-xxx.img" (https://www.xda-developers.com/how-to-install-twrp/
=> if it's as worked, you could reboot manually in twrp, make again the partitions if needed and flash any ROM.

[BRICKED] Stuck in android 8.1 bootloop

I just bricked my phone :crying: :crying:
I wanna get back to the official rom, after trying android P (without make it work).
(the rom is from http://en.miui.com/download-354.html)
But I run the wrong script and take the flash_all_lock.img
And my device is stuck on android 8.1 bootloop (It boot, but i get an animated line loop ...)
Any ideas or tricks before i get it back to warranty ?
Thanks

Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.

BubuXP said:
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
Click to expand...
Click to collapse
But since I flashed the official rom with data whipe, I'm unable to go to dev option and enter OEM Unlocking .... And Fastboot respond me that my device is locked

Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem

droopeur said:
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
Click to expand...
Click to collapse
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.

BubuXP said:
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
Click to expand...
Click to collapse
In fact, both work, but my phone still stucked at the bootloader (infinite line animation in both cases).
BubuXP said:
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
Click to expand...
Click to collapse
Yes I can enter recovery and I have already tried this, but I always end up with the error:
Code:
E: Unknow volume for path [/sideload/package.zip]
Verifying update package...
Update package verification took 17.3 s (result 0)
Installing update...
E:Error il /sideload/package.zip (Status 1)
Installation aborted
BubuXP said:
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
Click to expand...
Click to collapse
Yes of course !
But I revert to stock rom with Mi Flash and I click on Flash all and lock, since the telephone should have been "brand new" it should not have any problems but ...
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...

after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool

LUNARIO said:
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
Click to expand...
Click to collapse
But since I can't activate OEM I can't unlock bootloader....

try this http://www.xiaomitool.com/ not sure if it works on our phone but maybe can unlock the bootloader so you can use miflash

Have you sideloaded the zip? I think it's better to copy the OTA zip to microSD than ADB sideload.
droopeur said:
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
Click to expand...
Click to collapse
There should be only two methods for entering EDL:
1- request authorization in en.miui.com forum. Sometimes the admins accept requests to give an account one EDL flash permission (but I don't know if it works with AndroidOne devices).
2- finding the test point in the phone's motherboard.

Hi guys,
i tried to install this twrp but it doesnt work...
so i searched on internet and i found another article, i tried to check the current partition and install in another way
for first:
fastboot getvar current-slot
after i do this
fastboot boot_b recovery.img
and then
fastboot set_active b
so nothing to do....but right now my MI A2 lite not boot.
i try again to check my partition but this time i have no replay.
i have unlocked bootloader but i cant go to recovery and i cant boot!!
someone can help me please?

I HAVE THE SAME PROBLEM
everything you said is completely simillar to mine. Can someone help us? Or did you already fix it? Please help me i need my phone working.

I have same problem fastboot flash but after that, it started to reboot automatically. The phone was automatically turning off and on. I again did a "clean all and lock" via miflash tool but still now, no result!
I can boot into recovery without having any problem. But when I boo to setup country date....etc, it starts its auto rebooting process,
Any help ?

droopeur said:
But since I can't activate OEM I can't unlock bootloader....
Click to expand...
Click to collapse
Same situation here. I am desperate!! Did you solve it?

Isso resolve
steledama said:
Same situation here. I am desperate!! Did you solve it?
Click to expand...
Click to collapse
gadgetsfarm.com/download-mi-a2-lite-fastboot-rom-v9-6-4-download/[/url]

How to unbrick?
Hey guys. I bricked my Mi2 Lite as well. Is there any step by step way to unbrick?

had the same problem, was stuck in the bootloop even after I flashed img with MiFlash! NOTE: MY BOOTLOADER WAS UNLOCKED!!! (LUCKLY I DID NOT TRIED FLASH ALL AND UNLOCK!)
headed to this thread
Code:
fastboot flashing unlock
fastboot flashing unlock_critical
did not work, I get error saying FAILED
but after i used
Code:
fastboot oem edl
I went to MiFlash and used "Clean all" option (again note DON'T use "Clean all and lock"!!!). It took around 5 minutes to flash and my notif. light blinked whole the time. After it say "Success" I was able to normaly boot the phone again

Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.

Hi, where i can find MI A2 Lite Tool Kit? i open my device and i can put in EDL mode., my computer detect my pone in EDL mode, but i can not know do.
I like bypass FRP, can anybody help me
Thanks.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse

Hi all,
I also had same problem and I just resolve it.
My phone was in bootloop mode after stock rom flashing...
You don't need apply "fastboot oem edl" !
Just be sure your device is unlocked.
Download first stock rom (V9.6.4.0.ODLMIFF Firmware for Mi A2 Lite). If you flash last ROM, it don't work.
Flash it with XiaoMiFlash tool (don't forget to enable "Clean All") in bottom of the tool.
After reboot, you can apply OTA updates.
Enjoy !

Flashing using MI Flash got stuck

Hello,
I'm using Redmi Note 5 pro. Recently my device went on boot loop. Whenever I tried to restart, it was showing MI Logo for long time, nothing happens. I'm not able to enter into recovery mode as well (Vol Up + Power). But I can go to Fastboot mode (Vol down + power key).
Mine is not bootloader unlocked and I dont think I have enabled OEM Unlocking from the settings.
I tried downloading the ROM from below URL (Rom for Fastboot flash) -> whyred_global_images_V11.0.3.0.PEIMIXM_20191108.0000.00_9.0_global
http://c.mi.com/in/miuidownload/detail?guide=2
http://update.miui.com/updates/v1/fullromdownload.php?d=whyred_global&b=F&r=global&n=
When I check, whether the fastboot devices is showing mine or not, I can see my device listed
In another forum, I can across this, before flashing using MiFlash, they asked to download the Edl.cmd file from the below link and run it. I did that as well.
https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292
After that, when I select the downloaded ROM, and try to flash it with MiFlash (v2019.12.6.0), it keep showing the below line. but its not getting errored out. progress bar keeps going till the end but it stays with the below status. Attached the screenshot as well.
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || echo Missmatching image and device
Any help with will be much helpful! Thanks in advance!

I think flashing via fastboot on unlocked bootloader is not possible

Hi, you mean locked bootloader is not possible?
If yes, is there a way to fix the phone?
Thanks in advance!

karthik623521 said:
Hi, you mean locked bootloader is not possible?
If yes, is there a way to fix the phone?
Thanks in advance!
Click to expand...
Click to collapse
The way i see is Edl flash mode (wait for a proper answer)

I accidentally locked my chinese whyred while flashing global rom using miflash.
The only thing that worked for me was EDL flash chinese rom using QFIL following the tutorial here: https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
I had to use chinese rom for 360 hours until I could unlock the bootloader again.
You need to flash the rom version that matches your device origin (global, china, india, russia, etc..)

tsarig said:
I accidentally locked my chinese whyred while flashing global rom using miflash.
The only thing that worked for me was EDL flash chinese rom using QFIL following the tutorial here: https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
I had to use chinese rom for 360 hours until I could unlock the bootloader again.
You need to flash the rom version that matches your device origin (global, china, india, russia, etc..)
Click to expand...
Click to collapse
Hello, Thanks for letting me know about this method. I tried this but I'm not able to find my devices showing in Device Manager as "qualcomm hs-usb qdloader 9008" (I'm trying with fastboot mode as am not able to go to Recovery mode)
I tried installing the Qualcomm QDLoader 9008 driver using the method shown in the below link
https://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
1. tried direct installation of exe - didn't work)
2. there was manual method which asked me to reboot in edl mode using the command fastboot oem edl - but this shows error saying FAILED (remote: 'Device is already locked!')
//attached screenshot for reference
Thanks!

karthik623521 said:
Hello, Thanks for letting me know about this method. I tried this but I'm not able to find my devices showing in Device Manager as "qualcomm hs-usb qdloader 9008" (I'm trying with fastboot mode as am not able to go to Recovery mode)
I tried installing the Qualcomm QDLoader 9008 driver using the method shown in the below link
https://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
1. tried direct installation of exe - didn't work)
2. there was manual method which asked me to reboot in edl mode using the command fastboot oem edl - but this shows error saying FAILED (remote: 'Device is already locked!')
//attached screenshot for reference
Thanks!
Click to expand...
Click to collapse
You're in fastboot. not EDL mode.
EDL Testpoint - https://youtu.be/dYVR5BgNwG0
Connect the usb cable to both phone and pc, disconnect the battery flex cable, short the two EDL testpoint, and connect the battery flex cable. it will take some practice.
Also, there is a limited time in EDL mode to start flashing, if you too late you will have to repeat again.
Use this tutorial https://youtu.be/ikGsxf_s-zw

It seems shorting pins and edl flashing is the only way for reviving ur phone pal
Good luck

Recovering data on a DEAD Redmi Note 8 PRO

Hello,
I hope this is the right section for this post.
I've been using a Note 8 Pro with zero issues until one week ago when I accidentally dropped the phone in the water.
After a few seconds submerged the display turned off and I felt an intense heat coming from the zone of the battery.
Having no chance to recover the phone (tried with Isopropyl Alcohol too) I decided to open it and manually dry/clean each component, having seen the situation inside gave me the phone is dead but I still want to recover some pictures/data from it.
Before opening the open Minitool was not detecting any device on my Windows Laptop, after cleaning each component Minitool is instead detecting the phone via USB, but I still can't extract any data because the "Usb debugging" option is not tuned on (and no the device is not rooted).
Is there any option to extract data from the phone? There's a way to turn on USB Debugging via ADB on a non-rooted phone?
Thanks,
Andrea.

how about trying your luck with a service ? most of the time they do have access to special programs, which have a better functionality than adb.

Thanks for the hint, but I am not happy with the idea of someone playing with my data

1. Try reboot phone to recovery
2. Connect it to your computer (download Platform-tools)
3. In the folder with Platform-tools open cmd
4. In cmd - adb shell
5. cd storage/emulated/0
6. ls
7. Now, using the commands, drag files from your phone to your PC

Thanks for your hint.
No luck so far, I think because the phone is not in recovery mode.
I can hear the phone starting up several times (hear the jingle) so I think it's in a reboot loop and I don't know how to boot it into recovery mode wo a working display (tried with power/volume up combination with no luck).
From the windows taskbar I can see that the phone is recognized for a few seconds before it restarts.
EDIT: trying to switch the phone on with the combination "power/volume down" brings to a kind of stable state and I can now see the phone in the windows taskbar recognized as a generic "android device". Still no luck when trying to access the phone as there's no device in windows and no device obtained through "adb devices" command.
EDIT1: I think that the phone is in "FASTBOOT" mode. If I type "fastboot devices" I can see it detected but still can't access it.

Any idea? Should I give up?

If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info

Yes it's popping up and down when it's booted in recovery mode whilst is stably connected when in fastboot mode but in this case I can't access the internal memory of the device.
I didn't get the purpose of logging the devices connecting to the USB as I can see the device connected for a while and correctly recognized as Redmi Note 8 pro but as it keeps popping out windows have no time to show it's folder.
As for the code you wrote: i will try asap but already tried with "fastboot devices" and I get the phone correctly listed but still can't access its memory as told.

Renate said:
If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info
Click to expand...
Click to collapse
After rebooting the phone in fastboot mode I can see it recognized as a generic android device from windows (still can't access the storage folder of the device).
fastboot devices----> I get the device listed with a series of numbers/letters
fastboot getvar all---> I get a list of information on token/token version/partition type and size/baseband/bootloader etc.
fastboot oem device-info----> FAILED (remote: unknown command)
So I think it's clear that the device is in Fastboot mode and instead is in a boot loop when started in revocery mode.
Is there a way to extract data from fastboot mode?
Thanks,
Andrea.

If you put a custom recovery on it in the first place you can try reflashing recovery from fastboot.
Fastboot doesn't allow you to read anything.
oem device-info is obviously an oem command that might not be on any device.
You've got a Mediatek processor. That has some low level equivalent to Qualcomm EDL, but I have no experience with that.
If you can get there you can download the user data partition, but it's probably encrypted. Also no experience with that.
The easiest is if you can get the system to mount/decrypt the partition.
You've tried the normal system too?
Is this A/B? Have you tried changing slots?
How much time does it stay up in recovery? Do you have ADB? Maybe try:
Code:
# stop recovery
Does that prevent it from looping?

So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?

Sephiroth79 said:
So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?
Click to expand...
Click to collapse
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons

MysticNoOb said:
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons
Click to expand...
Click to collapse
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?

You really want to boot the normal system because that's the best way to get decrypted data.
I realized that you don't have ADB enabled there.
You should look at B. Kerler's https://github.com/bkerler/mtkclient/
If you can pull the boot image off your device then I might be able to fix it so that you have ADB.
You'd have to flash it back in fastboot or mtkclient.
You can also pull a copy of userdata off the device with mtkclient.
As far as booting into recovery, there's a way.
Here's how, if you don't have A/B (that is you flashed TWRP into recovery and not recovery_a or recovery_b)
then you can fastboot flash a special file into the misc partition and it wil boot into recovery next reboot.
To return things to normal you have to flash the empty file to the misc partition.
Code:
C:\>fastboot flash misc misc-rec.img
C:\>fastboot reboot
Only do this if you don't have partitions that end in _a or _b

I really don't know if I have partitions A and B as you mentioned and I think there's no way to check actually.
I confirm I don't have "USB Debugging" active on the phone.
So if I understand correctly I should do the following:
- Flash misc-reg.img via Fastboot
- Boot into recovery just rebooting the system after flashing the above file;
- use MTKclient to dump userdata or boot image to enable ADB on (I will need help with mtkclient I suppose).
Is it correct?
EDIT: flashed TWRP first and misc-rec then rebooted via Fastboot/Reboot but nothing happens.

Sephiroth79 said:
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?
Click to expand...
Click to collapse
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.

Kirasu2080 said:
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.
Click to expand...
Click to collapse
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?

Sephiroth79 said:
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?
Click to expand...
Click to collapse
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.

Kirasu2080 said:
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.
Click to expand...
Click to collapse
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?

Sephiroth79 said:
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?
Click to expand...
Click to collapse
Use brp 3.5.2 v3.1 or V3.6 to decrypt Miui 12.5

Question Hard brick Poco f3 no recovery

Hello community, first of all I clarify that I am using the google translator.
As the title says, my poco f3 has a hard brick, I was trying to flash the miui global rom via fastboot(stock rom was global miui for turkey) but an error occurred in the process (the same as attached in the image), at that moment I got scared because the phone did not start the system.
The bootloader was obviously unlocked, I tried to recover with XiaoMitool but nothing, I couldn't flash super.img either in Xiaomiflash, then I decided to download its stock rom and redo the process but it failed.
Before all this I had tried to install TWRP or OrangeFox but none could be installed, I only got to the TWRP boot but the option to flash the current TWRP did not appear and it did not recognize the internal memory and the OTG with the zip. Right now it only shows the POCO logo and goes directly to fastboot mode.
I'd appreciate your help.
Edit: It does not have the recovery stock

edixon2021 said:
Hello community, first of all I clarify that I am using the google translator.
As the title says, my poco f3 has a hard brick, I was trying to flash the miui global rom via fastboot(stock rom was global miui for turkey) but an error occurred in the process (the same as attached in the image), at that moment I got scared because the phone did not start the system.
The bootloader was obviously unlocked, I tried to recover with XiaoMitool but nothing, I couldn't flash super.img either in Xiaomiflash, then I decided to download its stock rom and redo the process but it failed.
Before all this I had tried to install TWRP or OrangeFox but none could be installed, I only got to the TWRP boot but the option to flash the current TWRP did not appear and it did not recognize the internal memory and the OTG with the zip. Right now it only shows the POCO logo and goes directly to fastboot mode.
I'd appreciate your help.
Edit: It does not have the recovery stock
Click to expand...
Click to collapse
try booting twrp via fastboot and then format data.
Obviously you'll lose your data, but it might give you access to your phone back.

Good morning.
Try to enter with quiet fastboot mode, both in twrp and orange fox, it's the same process. Put the phone in fastboot mode and then open minimal adb.
1. Put the fastboot devices command, the serial number of your mobile should appear on the command screen.
2. Put the command fastboot boot orangefox.img or twrp.img, take a good look at the file you have downloaded, to make the boot easy, it has to be an .img image and not a zip file.
3. If you can get into both fastboot and orangefox, please format the data.
4. Try to flash the miui stock rom with the same process where the error appeared, remember that this rom (it worked for me) has to be the rom for the poco f3 fastboot, since there are 2 versions (I think I have seen this) one which is fastboot and another which is not.
LUCK!

ShAnGoS said:
Good morning.
Try to enter with quiet fastboot mode, both in twrp and orange fox, it's the same process. Put the phone in fastboot mode and then open minimal adb.
1. Put the fastboot devices command, the serial number of your mobile should appear on the command screen.
2. Put the command fastboot boot orangefox.img or twrp.img, take a good look at the file you have downloaded, to make the boot easy, it has to be an .img image and not a zip file.
3. If you can get into both fastboot and orangefox, please format the data.
4. Try to flash the miui stock rom with the same process where the error appeared, remember that this rom (it worked for me) has to be the rom for the poco f3 fastboot, since there are 2 versions (I think I have seen this) one which is fastboot and another which is not.
LUCK!
Click to expand...
Click to collapse
Hello, i had already tried to boot with twrp.img but without success, the good news is that I have already recovered it and the solution was as simple as taking the flash_all.bat from the rom and it could already be in any version of miui.
What I don't understand is why it hadn't worked with XiaoMitool and Xiaomiflash, and I still can't install TWRP because it doesn't recognize internal memory and OTG.
Anyway thanks for your help.

edixon2021 said:
Hello, i had already tried to boot with twrp.img but without success, the good news is that I have already recovered it and the solution was as simple as taking the flash_all.bat from the rom and it could already be in any version of miui.
What I don't understand is why it hadn't worked with XiaoMitool and Xiaomiflash, and I still can't install TWRP because it doesn't recognize internal memory and OTG.
Anyway thanks for your help.
Click to expand...
Click to collapse
Glad you got it sorted, When installing a MIUI stock rom remember to put the Firm wear folder on your C: Drive and remove any spaces from title,
As for TWRP & Orangefox recoverry, i installed these in fast boot mode and use "Temporary Recovery" by downloading RUN_TWRP-Orange Fox FIXED.bat /unzipping/ and running the "RUN_TWRP-Orange Fox FIXED.bat File, once in temporary OF Recovery you can choose to make OF Recovery permanent by installing current version of OF from within OF, Check my post on the EVO-X Thread post 20,
you will also find my post regarding OTG issues,
--------------------------------------------------------------------------
OTG is no longer Now working with Orangefox recovery.
To overcome the OTG showing 0MB or .., remove the OTG adaptor,
reboot into OF Recovery, re-connect your OTG adaptor and
tap ☰ in the bottom right of the main screen to open the MENU,
open Mount, tap USB-STORAGE (wait 5 seconds) the (USB-STORAGE background will turn black), shortly after the check box will enabled, many thanks to Rafsf for the Workaround.
I hope this helps a bit

johnr64 said:
Glad you got it sorted, When installing a MIUI stock rom remember to put the Firm wear folder on your C: Drive and remove any spaces from title,
As for TWRP & Orangefox recoverry, i installed these in fast boot mode and use "Temporary Recovery" by downloading RUN_TWRP-Orange Fox FIXED.bat /unzipping/ and running the "RUN_TWRP-Orange Fox FIXED.bat File, once in temporary OF Recovery you can choose to make OF Recovery permanent by installing current version of OF from within OF, Check my post on the EVO-X Thread post 20,
you will also find my post regarding OTG issues,
--------------------------------------------------------------------------
OTG is no longer Now working with Orangefox recovery.
To overcome the OTG showing 0MB or .., remove the OTG adaptor,
reboot into OF Recovery, re-connect your OTG adaptor and
tap ☰ in the bottom right of the main screen to open the MENU,
open Mount, tap USB-STORAGE (wait 5 seconds) the (USB-STORAGE background will turn black), shortly after the check box will enabled, many thanks to Rafsf for the Workaround.
I hope this helps a bit
Click to expand...
Click to collapse
Thank you very much friend you deserve heaven, finally I was able to install OF permanently.