Is there any custom rom for the moto g7 play that is stable?
Chapie1 said:
Is there any custom rom for the moto g7 play that is stable?
Click to expand...
Click to collapse
What is the most current firmware? I can try to build one as long as you have twrp and root
Sent from my moto g(6) play using Tapatalk
Sands207 said:
What is the most current firmware? I can try to build one as long as you have twrp and root
Sent from my moto g(6) play using Tapatalk
Click to expand...
Click to collapse
there they are I use the xt1952-2 version
https://mirrors.lolinet.com/firmware/moto/channel/official/
Chapie1 said:
there they are I use the xt1952-2 version
https://mirrors.lolinet.com/firmware/moto/channel/official/
Click to expand...
Click to collapse
Code:
GENERAL INFO
Manufacturer: motorola
Brand: motorola
Phone Model: moto g(7) play / moto g(7) play
Device Type: channel
Product Name: channel_reteu
Country of Origin:
Manufacturing Date:
Knox Warranty Void:
Colour:
Internal Storage:
CSC INFO
Product Code: pH
Original CSC Code:
Firmware's CSC Code:
Active CSC Code:
Available CSC Codes:
CSC Country:
CSC Country ISO:
Mobile Operator: Virgin / 23430 / 23438
FIRMWARE INFO
Bootloader Version: 0xC111
PDA Version:
CSC Version:
Baseband Version: M632_26.100.01.120.01R CHANNEL_SUPER_CUST
Latest Firmware: N/A
Firmware Status:
Kernel Version: 4.9.112-perf+ [email protected] #1 32-bit
Java Virtual Machine: ART 2.1.0
OS INFO
Root Existence: Yes
Android Version: 9
Build Number: PPYS29.105-134-9 (cd8e0)
Build Fingerprint: motorola/channel_reteu/channel:9/PPYS29.105-134-9/cd8e0:user/release-keys
Build Description: channel_reteu-user 9 PPYS29.105-134-9 cd8e0 release-keys
Build Date: Mon Feb 10 12:39:21 CST 2020
Changelist:
HARDWARE INFO
Hardware: qcom
Board: msm8953 [32-bit]
Platform: msm8953
Chip:
GPU: Qualcomm Adreno 506
Modem Board:
Hardware Revision:
Total RAM: 1.79 GB
Screen: 5.63 inches, 720 × 1512 pixels, 293 ppi, 240 dpi
Camera:
Rear: 13MP
Front: 8MP
Sound Card: msm8953_-tas2560
Loudspeaker:
WiFi Chip: Motorola Mobility LLC, a Lenovo Company
GPS Chip:
Battery: Li-ion 3000 mAh, Health: Good
USAGE HISTORY
Battery Health: 99.4 %
Last saved on: 08-Apr-2020 00:53:49
Thanks, I'll get to work on a rom today!
Sent from my moto g(6) play using Tapatalk
I used this one for my XT1952-4...
The build is for XT1952-2 (posted by αℓ૯×12345) but I went ahead and tried it. So far (couple days now) it is working pretty well. I've connected it to my WiFi and I've been surfing the internet. Also, Google Play Store works.
Hope this is helpful:
https://forum.xda-developers.com/g7-play/development/gsi-lineageos-17-1-modified-t4075035
I followed the directions in that thread; I already had the bootloader unlocked (obviously, right?) I also had TWRP installed using the method in this thread:
https://forum.xda-developers.com/g7-play/how-to/how-to-successfully-install-twrp-g7-play-t3979701
Read down the thread a little bit. In the directions, Linuxassassin leaves out what turned out to be an important step for me, which is after I fastbooted the TWRP image linked to in that thread, I needed to select Wipe from the TWRP menu and then Format Data. I needed to do that to remove the encryption from the file system so that it was usable for the rest of the steps for installing TWRP. As already stated, it is working pretty well at the moment.
Edit...
FortunateFennec said:
The build is for XT1952-2 (posted by αℓ૯×12345) but I went ahead and tried it. So far (couple days now) it is working pretty well. I've connected it to my WiFi and I've been surfing the internet. Also, Google Play Store works.
Hope this is helpful:
https://forum.xda-developers.com/g7-play/development/gsi-lineageos-17-1-modified-t4075035
I followed the directions in that thread; I already had the bootloader unlocked (obviously, right?) I also had TWRP installed using the method in this thread:
https://forum.xda-developers.com/g7-play/how-to/how-to-successfully-install-twrp-g7-play-t3979701
Read down the thread a little bit. In the directions, Linuxassassin leaves out what turned out to be an important step for me, which is after I fastbooted the TWRP image linked to in that thread, I needed to select Wipe from the TWRP menu and then Format Data. I needed to do that to remove the encryption from the file system so that it was usable for the rest of the steps for installing TWRP. As already stated, it is working pretty well at the moment.
Click to expand...
Click to collapse
Sorry folks. New here; don't know how to edit my posts ...Edit: Now there's an edit button... huh. OK.
Ran into a little problem if you are rebooting from TWRP when the above stuff has been done.
When rebooting from TWRP using the TWRP image in the above thread, and it gives you the options to "Prompt to install TWRP app if not installed" and "Install as system app" be sure NOT to install them. Press the button that says "Do Not Install." If you do install them, it causes the boot to hang up on the "android" screen. I fixed the problem by going back into TWRP, wiping the system partition, and reinstalling the custom ROM image.
Anyway, hope this helps someone.
CFKod said:
Code:
GENERAL INFO
Manufacturer: motorola
Brand: motorola
Phone Model: moto g(7) play / moto g(7) play
Device Type: channel
Product Name: channel_reteu
Country of Origin:
Manufacturing Date:
Knox Warranty Void:
Colour:
Internal Storage:
CSC INFO
Product Code: pH
Original CSC Code:
Firmware's CSC Code:
Active CSC Code:
Available CSC Codes:
CSC Country:
CSC Country ISO:
Mobile Operator: Virgin / 23430 / 23438
FIRMWARE INFO
Bootloader Version: 0xC111
PDA Version:
CSC Version:
Baseband Version: M632_26.100.01.120.01R CHANNEL_SUPER_CUST
Latest Firmware: N/A
Firmware Status:
Kernel Version: 4.9.112-perf+ [email protected] #1 32-bit
Java Virtual Machine: ART 2.1.0
OS INFO
Root Existence: Yes
Android Version: 9
Build Number: PPYS29.105-134-9 (cd8e0)
Build Fingerprint: motorola/channel_reteu/channel:9/PPYS29.105-134-9/cd8e0:user/release-keys
Build Description: channel_reteu-user 9 PPYS29.105-134-9 cd8e0 release-keys
Build Date: Mon Feb 10 12:39:21 CST 2020
Changelist:
HARDWARE INFO
Hardware: qcom
Board: msm8953 [32-bit]
Platform: msm8953
Chip:
GPU: Qualcomm Adreno 506
Modem Board:
Hardware Revision:
Total RAM: 1.79 GB
Screen: 5.63 inches, 720 × 1512 pixels, 293 ppi, 240 dpi
Camera:
Rear: 13MP
Front: 8MP
Sound Card: msm8953_-tas2560
Loudspeaker:
WiFi Chip: Motorola Mobility LLC, a Lenovo Company
GPS Chip:
Battery: Li-ion 3000 mAh, Health: Good
USAGE HISTORY
Battery Health: 99.4 %
Last saved on: 08-Apr-2020 00:53:49
Click to expand...
Click to collapse
I downloaded your firmware as well as the sprint and the retus variants. It will take me a day or two to complete. are you willing to test?
Sent from my moto g(6) play using Tapatalk
Sands207 said:
I downloaded your firmware as well as the sprint and the retus variants. It will take me a day or two to complete. are you willing to test?
Sent from my moto g(6) play using Tapatalk
Click to expand...
Click to collapse
What ROM are you porting? Id be willing to test on my RETGB (XT1952-1 iirc) as the firmware is quite similar between devices.
00p513 said:
What ROM are you porting? Id be willing to test on my RETGB (XT1952-1 iirc) as the firmware is quite similar between devices.
Click to expand...
Click to collapse
It will be custom stock. I will grab your firmware as well. my upload is slow but it's now Wednesday, tonight I'll finish them and upload them. Are you able to flash zips with your recovery as of now? Any requests or suggestions on root?
Sent from my moto g(6) play using Tapatalk
Sands207 said:
It will be custom stock. I will grab your firmware as well. my upload is slow but it's now Wednesday, tonight I'll finish them and upload them. Are you able to flash zips with your recovery as of now? Any requests or suggestions on root?
Sent from my moto g(6) play using Tapatalk
Click to expand...
Click to collapse
we are currently having issues with magisk, but phh's su works on gsis. and yes i can flash zips in twrp
Sands207 said:
It will be custom stock. I will grab your firmware as well. my upload is slow but it's now Wednesday, tonight I'll finish them and upload them. Are you able to flash zips with your recovery as of now? Any requests or suggestions on root?
Click to expand...
Click to collapse
Ill test
I've been sick so I'm a little behind. I'll include the phh su for testing purposes until we can get magisk working. Expect an update on the ROM's soon. I'm building for 4 different models so it's taking me longer than i anticipated.
Sands207 said:
I've been sick so I'm a little behind. I'll include the phh su for testing purposes until we can get magisk working. Expect an update on the ROM's soon. I'm building for 4 different models so it's taking me longer than i anticipated.
Click to expand...
Click to collapse
Thank you.
Moto G7 PLAY with MicroG?
Any progress with this project?
I have the Moto G7 Play..
I would like to install TWRP, flash custom ROMs.. is this available yet?
In particular i would like a ROM that supports MicroG /signature spoofing..
https://www.youtube.com/watch?v=UXLo15l2i4c
I have seen this is possible, but i do not know how to achieve it.. any help?
i have the sprint/boost version. i have got twrp to work but ran into a problem with magisk. treble versus non treble. would be willing to pull anything that would help or try anything, this is an extra phone for me so would love to help someone.
bigsteve62275 said:
i have the sprint/boost version. i have got twrp to work but ran into a problem with magisk. treble versus non treble. would be willing to pull anything that would help or try anything, this is an extra phone for me so would love to help someone.
Click to expand...
Click to collapse
What twrp u use and is it decrypting phone properly
i used the twrp that spaceminer provided, followed that tutorial, can possible attach a copy and refer you to the tutorial. also used the dtbo that was provided also.
it wont let me attatch the twrp, sorry
if needs be i will write out exatcly what i have done and send you screen shots of everything. i will help however i can, you guys have been great. keeps me in paperweights lol
Related
Hi, my Samsung S9 (SM-G960F, dual SIM) was purchased in May 2018 from Dubai (fully unlocked) and is being used in India. There were no carrier restrictions at the time of purchase, it was purchased fully unlocked.
Even today, it still shows Android Security Patch Level at 1/April/2018. I have enrolled into Samsung Pie beta, and I try everyday to download software manually, but no update has come, either in security patch or in software version. The details are given below:
When I try to update software manually by going to software update - download updates manually, it says 'The latest updates have already been installed. Current version : G960FXXU1ARD4/G960FOXM1ARCA/G960FXXU1ARD6'
When I go to settings - software information, the android version is 8.0.0, samsung experience version is 9.0, baseband version is G960FXXU1ARD6, build number : R16NW.G960FXXU1ARD4, kernel version : 4.9.59-13138374-QB17882910 [email protected] #1 Tue Apr 24 11:50:17 KST2018, android security patch level : 1 April 2018
I have even downloaded Samsung Smart Switch and tried downloading latest software but no use. The message I get there is 'Your software is up to date : RD4(INS)'
Please help. At this rate, I am not sure if I will receive any updates at all, even security patches. I dont know what is the problem.
Thanks in advance.
Flash it manually with ODIN, loads of guides all over XDA if you look
Thanks a a lot.
*Detection* said:
Flash it manually with ODIN, loads of guides all over XDA if you look
Click to expand...
Click to collapse
Thanks.
I have downloaded Odin v 3.13.1. I have downloaded the Android Pie firmware available in Sammobile applicable in UAE and the firmware is G960FXXU2CRLI/G960FOXM2CRLI.
Can I directly update my firmware from G960FXXU1ARD4/G960FOXM1ARCA using Odin 3.13.1 to G960FXXU2CRLI/G960FOXM2CRLI. Please advise.
Thanks.
Kssomu said:
Thanks.
I have downloaded Odin v 3.13.1. I have downloaded the Android Pie firmware available in Sammobile applicable in UAE and the firmware is G960FXXU2CRLI/G960FOXM2CRLI.
Can I directly update my firmware from G960FXXU1ARD4/G960FOXM1ARCA using Odin 3.13.1 to G960FXXU2CRLI/G960FOXM2CRLI. Please advise.
Thanks.
Click to expand...
Click to collapse
Yea, just flash as normal, your bootloader will change to version 2 so you will not be able to downgrade back to that current firmware you are running as it is version 1
*Detection* said:
Yea, just flash as normal, your bootloader will change to version 2 so you will not be able to downgrade back to that current firmware you are running as it is version 1
Click to expand...
Click to collapse
Thanks a lot for the prompt response. I would attempt to directly flash to this version in one step tonight.
Thanks once again.
This is happening to me too...
I have an s9 plus bought from Dubai full unlocked...bt still stuck on December 2018 patch where as other s9 plus recieving April 2019 patch..I'm worried about this..my build number is SM965FXXU2CRLI
good night, I have an android radio bought on aliexpress, is the seller of the podofo store, anuque panlelo also sells it as model S1.
The data are the following:
System: K6_01_IH_V2.0.1_20181012
Kernel: 3.4.67
MCU: CM_18.02.07_09.28
APP: MT1002_V1.0.9
Compilation number: ALPS KK1.MP1.V2.11
The manufacturer says it's Android 6, but I think it's a lie and it's Kit Kat.
My question is whether this radio could be updated to a newer version of Android, maybe 7.1.2 or Android 8.0
Thank you.
This is link: https://es.aliexpress.com/item/Podo...057.html?spm=a2g0s.9042311.0.0.274263c0Rgy53o
jesusmata said:
good night, I have an android radio bought on aliexpress, is the seller of the podofo store, anuque panlelo also sells it as model S1.
The data are the following:
System: K6_01_IH_V2.0.1_20181012
Kernel: 3.4.67
MCU: CM_18.02.07_09.28
APP: MT1002_V1.0.9
Compilation number: ALPS KK1.MP1.V2.11
The manufacturer says it's Android 6, but I think it's a lie and it's Kit Kat.
My question is whether this radio could be updated to a newer version of Android, maybe 7.1.2 or Android 8.0
Thank you.
This is link: https://es.aliexpress.com/item/Podo...057.html?spm=a2g0s.9042311.0.0.274263c0Rgy53o
Click to expand...
Click to collapse
Not an MTCx unit.
marchnz said:
Not an MTCx unit.
Click to expand...
Click to collapse
Thanks.
Then, dont can update?
I think I bought the same one from Amazon, Podofo logo on boot.
System: K6_01_IH_V2.0.1_20181012
Kernel: 3.4.67
Compilation number: ALPS KK1.MP1.V2.11
If an update is not possible, is there any alternative roms I could use? The one that was provided with the unit is buggy af. Any tips on how to reboot this thing into recovery or download mode would be very welcomed.
Just found out rooting is possible with kingroot app, I was also able to reboot it into recovery and download mode. Volume +/- and power buttons did not work in recovery, so did touchscreen, it does not power down when you remove the key from ignition, i had to poke reset. fastboot screen lasted only a couple secs, i did not have anything connected.
I tried today to root this phone in all sorts of ways, but mainly I got stuck at the first step of getting a custom recovery, I found the twrp files for my phone, but when I tried to flash the file in Odin I got an error of "secure check fail : recovery"
I tried different versions of Odin.
I also tried t use fastboot, but it couldn't recognize my device, (adb devices shows my device, while fastboot doesn't [and of course I'm in download mode])
I've tried all sorts of drivers, from universal drivers to the specific one for my device from the Samsung website, fastboot still didn't see me device...
I have no idea what to do now...
I managed to get an official stock firmware update, that's all I was able to do...
Current device info:
One UI version: 1.0
Android version: 9
Baseband version: G960USQU3CSAB
Kernel version: 4.9.112-15119402
Build number: PPR1.180610.011.G960USQU3CSAB
SE for Android status: Enforcing, SEPF_SM-G960U_9_0001
Knox version: Knox 3.2.1 , Knox API level 27 TIMA 4.0.0
Security provider SW ver. : SAOMC_SM-G960U_OYN_XAA_PP_003, 4c51483458303498, XAA/XAA/XAA
previous device info (before the update):
Android Version: 8.0.0
Baseband version: G960U1UEU3ARK5
Kernel version: 4.9.65-14745140
Build number: R16NW.G960U1UEU3ARK5
Modem board: SDM845
If I think of anything else to add I'll edit and add it here...
If anyone wants more info, I'll try my best to provide it
Light_Wing said:
I tried today to root this phone in all sorts of ways, but mainly I got stuck at the first step of getting a custom recovery, I found the twrp files for my phone, but when I tried to flash the file in Odin I got an error of "secure check fail : recovery"
I tried different versions of Odin.
I also tried t use fastboot, but it couldn't recognize my device, (adb devices shows my device, while fastboot doesn't [and of course I'm in download mode])
I've tried all sorts of drivers, from universal drivers to the specific one for my device from the Samsung website, fastboot still didn't see me device...
I have no idea what to do now...
I managed to get an official stock firmware update, that's all I was able to do...
Current device info:
One UI version: 1.0
Android version: 9
Baseband version: G960USQU3CSAB
Kernel version: 4.9.112-15119402
Build number: PPR1.180610.011.G960USQU3CSAB
SE for Android status: Enforcing, SEPF_SM-G960U_9_0001
Knox version: Knox 3.2.1 , Knox API level 27 TIMA 4.0.0
Security provider SW ver. : SAOMC_SM-G960U_OYN_XAA_PP_003, 4c51483458303498, XAA/XAA/XAA
previous device info (before the update):
Android Version: 8.0.0
Baseband version: G960U1UEU3ARK5
Kernel version: 4.9.65-14745140
Build number: R16NW.G960U1UEU3ARK5
Modem board: SDM845
If I think of anything else to add I'll edit and add it here...
If anyone wants more info, I'll try my best to provide it
Click to expand...
Click to collapse
AFAIK, root isnt possible for the 960U's, only the 960F's
I think I saw someone write they were able to root it.. though I couldn't find it again for some reason...
Also, it's supposed to be an UNLOCKED phone with the U1 software... I don't understand how or why it cannot be rooted (or change to a custom ROM)...
Hope someone know how to get it done
Light_Wing said:
I think I saw someone write they were able to root it.. though I couldn't find it again for some reason...
Also, it's supposed to be an UNLOCKED phone with the U1 software... I don't understand how or why it cannot be rooted (or change to a custom ROM)...
Hope someone know how to get it done
Click to expand...
Click to collapse
"Unlocked" means carrier SIM unlocked. Different thing.
All Qualcomm Snapdragon variants have locked bootloaders that prevent rooting. Except the Chinese variant - the lone exception.
There was an exploit found last year that allowed rooting for one of the Qualcomm variants but can't remember which, and newer firmware may have since blocked the exploit.
Is it worth trying to install firmware (official) for the g9600 phone (China Snapdragon)? And from there if that was successful, would I be able to use CROM to OEM unlock?
Light_Wing said:
Is it worth trying to install firmware (official) for the g9600 phone (China Snapdragon)? And from there if that was successful, would I be able to use CROM to OEM unlock?
Click to expand...
Click to collapse
nope. it will very likely fail at the Odin flash process. you can if you want to, but im betting it will fail. Hell, i even had to use a modded Odsin just to flash another carriers firmware on mine, but it worked like a charm. That being said, it was all within the same basic model info, what youre proposing isnt
I'll try the modded Odin, if its a fail, I'll probably give up
Light_Wing said:
I'll try the modded Odin, if its a fail, I'll probably give up
Click to expand...
Click to collapse
careful not to permabrick your phone man
Light_Wing said:
I'll try the modded Odin, if its a fail, I'll probably give up
Click to expand...
Click to collapse
So, What's the verdict?
I'm guessing it was a NO-GO.
baraban0 said:
So, What's the verdict?
I'm guessing it was a NO-GO.
Click to expand...
Click to collapse
Yeah, I have up and got an G9600/DS
Funcionó?
Light_Wing said:
Yeah, I have up and got an G9600/DS
Click to expand...
Click to collapse
Cambiaste la ROM de g960u1 a la de g9600 y pudiste rootearlo?
Josh730 said:
Cambiaste la ROM de g960u1 a la de g9600 y pudiste rootearlo?
Click to expand...
Click to collapse
english pls
as for your answer, no, i got an g9600, and rooted it
Wow u really rooted it
I need some help to root this device. I can't find TWRP files for it. And the ones that "work" dont. No matter what i flash with Odin I always get a "failed" message. Here is the phone info to help you all out. THANKS!
Samsung Experience version: 9.0
Baseband version: G891AUCU6CTB1
Kernal version: 3.18.71-15820403////// [email protected]////WED Feb 5 15:29:57 KST 2020
Build Number: R16NW.G891AUCU6CTB1
SE for Android Status: ENFORCING///////SEPF_SAMSUNG-SM-G891A_8.0.0_0018
Knox Version: Knox 3.1//// Knox API Level 25////Tima 3.3.0
Security software version: MDF v3.1 release 2////WLAN v1.0////VPN PP-MOD v2.1 release 1.1////ASKS v2.0.0 release 180123////FIPS BoringSSL v1.2/////FIPS SKC v1.7////FIPS SCrypto v1.0/////SMR Dec-2019 release 1
Android security patch level: December 1, 2019
Thanks for you help!
that's the very last firmware is it not.... how is the battery life for it?
sadly there is no root for android 8.0 on this phone
supertac said:
that's the very last firmware is it not.... how is the battery life for it?
sadly there is no root for android 8.0 on this phone
Click to expand...
Click to collapse
Can it be downgraded I just got one and it's super slow practically useless....
fockewulf190a10 said:
Can it be downgraded I just got one and it's super slow practically useless....
Click to expand...
Click to collapse
just replied to your similar complain elsewhere... Am on android 8 unrooted and 300+ apps and hell of a lot of other stuff and no such issues... so may be there is more wrong with the phone than you realise....
fockewulf190a10 said:
Can it be downgraded I just got one and it's super slow practically useless....
Click to expand...
Click to collapse
back to 7.0? how do you do that?
落后念书 said:
back to 7.0? how do you do that?
Click to expand...
Click to collapse
No se puede
I'd really like to be able to get this phone onto the Verizon network. I have the exact same software numbers as the OP and am trying to open my phone up to work on Verizon. I've seen bits and pieces that others have done it but never have found the complete successful procedure.
Anyone??
Hey All I've got an interesting one that I would love some feedback/help on...
When I got the phone it showed the following within Android...
Model: SM-G960F
Baseband version - G960FXXU2BRK2
Build # R16NW.G960FXXU2BRK2
AP, CP, CSC = G960FXXU2BRK2
Android 8.0.0 (Oreo)
However, the box showed that it should have been...
Model: SM-G960U
SW-Version G960USQS2ARF4
Phone previously worked on Verizon (even though the SW-Version from research shows T-Mobile or US Cellular?)
I wasn't sure what to believe about this device so I downloaded the PhoneInfo app and it showed the Origin CSC as DCM (aka Japan) and the Snapdragon processer. Upon further investigation I got the wild idea that the device was actually the SC-02K (Galaxy S9). So I downloaded the latest Android 10 source code for that from Frija and used Odin to install it. Upgrade went smoothly! But now I show the following...
Model: SC-02K
Baseban version - SC02KOMU1CTG1
Build # QP1A.190711.020.SC02KOMU1CTG1
SW-Version SAOMC_SC-02K_DCM_DCM_QQ_0008 DCM/DCM/KDI
Android 10 (Q) June 1, 2020 Security Patch
So my real questions are as follows for starters...
What device is this?
How do I get it back to normal?
Is there a way to change the CSC of the device or is that model/CSC firmware specific?
Does that require root?
Can I put a custom GSI on it? (ideally phusson with Android 11)
Goal is to have it running Android 11 to test the new certificate issues/features of Android 11 on WiFi before mass device roll out of Android 11
ohmyuser said:
Hey All I've got an interesting one that I would love some feedback/help on...
When I got the phone it showed the following within Android...
Model: SM-G960F
Baseband version - G960FXXU2BRK2
Build # R16NW.G960FXXU2BRK2
AP, CP, CSC = G960FXXU2BRK2
Android 8.0.0 (Oreo)
However, the box showed that it should have been...
Model: SM-G960U
SW-Version G960USQS2ARF4
Phone previously worked on Verizon (even though the SW-Version from research shows T-Mobile or US Cellular?)
I wasn't sure what to believe about this device so I downloaded the PhoneInfo app and it showed the Origin CSC as DCM (aka Japan) and the Snapdragon processer. Upon further investigation I got the wild idea that the device was actually the SC-02K (Galaxy S9). So I downloaded the latest Android 10 source code for that from Frija and used Odin to install it. Upgrade went smoothly! But now I show the following...
Model: SC-02K
Baseban version - SC02KOMU1CTG1
Build # QP1A.190711.020.SC02KOMU1CTG1
SW-Version SAOMC_SC-02K_DCM_DCM_QQ_0008 DCM/DCM/KDI
Android 10 (Q) June 1, 2020 Security Patch
So my real questions are as follows for starters...
What device is this?
How do I get it back to normal?
Is there a way to change the CSC of the device or is that model/CSC firmware specific?
Does that require root?
Can I put a custom GSI on it? (ideally phusson with Android 11)
Goal is to have it running Android 11 to test the new certificate issues/features of Android 11 on WiFi before mass device roll out of Android 11
Click to expand...
Click to collapse
If you were able to flash the odin without any errors then thats the true hardware for that device, I have seen sellers converting these with phones into SM-G960F to get more money out of it, but they actually are Japanese models. In your case try this twrp
[OFFICIAL] [TWRP] [SM-G9650] star2qlte/chn
ONLY FOR Qualcomm SM-G9650 Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI...
forum.xda-developers.com
zfk110 said:
If you were able to flash the odin without any errors then thats the true hardware for that device, I have seen sellers converting these with phones into SM-G960F to get more money out of it, but they actually are Japanese models. In your case try this twrp
[OFFICIAL] [TWRP] [SM-G9650] star2qlte/chn
ONLY FOR Qualcomm SM-G9650 Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the feedback! Any idea how the sellers convert them to the SM-G960F? I'd be interested in trying to attempt that for the learning experience.
For other's stuck on this I finally was able to get this ROM working on my device...
Loading...
ohmyuser said:
Thanks for the feedback! Any idea how the sellers convert them to the SM-G960F? I'd be interested in trying to attempt that for the learning experience.
For other's stuck on this I finally was able to get this ROM working on my device...
Loading...
Click to expand...
Click to collapse
They use Z3X box of something similar to it for able to force it.