Please help
I can't seem to get my Jasjar flashed. I dont know what I'm doing wrong.
Piesang said:
Please help
I can't seem to get my Jasjar flashed. I dont know what I'm doing wrong.
Click to expand...
Click to collapse
Read this thread first, especially the first post. You can skip step 1 and 2 as long as you have the 11 files on the list. Here: http://forum.xda-developers.com/showthread.php?t=269118
cktlcmd said:
Read this thread first, especially the first post. You can skip step 1 and 2 as long as you have the 11 files on the list. Here: http://forum.xda-developers.com/showthread.php?t=269118
Click to expand...
Click to collapse
Thanks m8
I'll have a look at it. I appreciate the help.
I must be stupid becaue I'm not getting it right. I keep on getting "Connection Error"
Please help.
maybe this will work for you
hello,
i too have problems with flashing roms. i have bootloader 1.01 and it ignores whether the device is connected via usb or not - it will simply display 'Serial' or 'USB' no matter whether i disconnect or connect the device. however i have found out that to be able to flash your device one must in such case:
1) enter the bootloader mode (flash+power+reset) repeatedly until you will see both 'USB' on the device screen and 'USB' as a connection option in mtty. it might help trying with both disconnected and connected device while entering the bootloader mode. this is the worst part.
2) once you see 'USB' as a connection option in mtty, choose it and connect. Press ENTER, 'USB> ' prompt should be displayed, type 'set 14 0' and press ENTER. close mtty
3) enter the device into the bootloader mode again. this step is needed, without it the flashing application will timeout.
4) now you should be able to flash it.
hth, fuf.
Try reading this thread: http://forum.xda-developers.com/showthread.php?t=285299
I think you have the same problem where the computer can't recognize the Universal. The solution is in there too.
cktlcmd said:
Try reading this thread: http://forum.xda-developers.com/showthread.php?t=285299
I think you have the same problem where the computer can't recognize the Universal. The solution is in there too.
Click to expand...
Click to collapse
Thanks m8
At last I got it right. I'm first trying the Helmi 3.3 Rom. Will try the Latest Jasjar Rom later.
I get a error when my Jasjar boots.
sddaemon.exe cannot be opened.
What is this?
Does anyone have this problem?
Everytime I try to load Advanced Config, I get an unexpected error has occured....
ttvl4447 said:
Does anyone have this problem?
Everytime I try to load Advanced Config, I get an unexpected error has occured....
Click to expand...
Click to collapse
could you add more details on error??
Olioaglio
Hi,
I'm running on Schap's 3.54 ROM.
It attempts to load some files or settings, but half way through it says "An unexpected error has occured in AdvancedConfig.exe. Select Quit and then restart this program"
I clicked on Details and copied it as follow:
AdvancedConfig.exe
FormatException
at System.Boolean.Parse()
at System.Convert.ToBoolean()
at System.String.System.IConvertible.ToBoolean()
at System.Convert.ToBoolean()
at AdvancedConfig.Ӓ.֘()
at AdvancedConfig.Ӓ.ը()
at System.Windows.Forms.Form.OnLoad()
at System.Windows.Forms.Form._SetVisibleNotify()
at System.Windows.Forms.Control.set_Visible()
at System.Windows.Forms.Application.Run()
at AdvancedConfig.ִ.ֿ()
i encountered an error during auto-config too.
I was flashing a cooked WM6 rom....it was successfull, then attempts to do some auto-config, but in the middle of the process, during "Running Dopod_Black.tsk... it stops and hangs with a message saying
Windows\custTSK.exe does not exist!
then nag-hang na sya I cant tap OK nor can I click on any hardbuttons...only way is to softreset
any clues?
ttvl4447 said:
Hi,
I'm running on Schap's 3.54 ROM.
It attempts to load some files or settings, but half way through it says "An unexpected error has occured in AdvancedConfig.exe. Select Quit and then restart this program"
I clicked on Details and copied it as follow:
AdvancedConfig.exe
FormatException
at System.Boolean.Parse()
at System.Convert.ToBoolean()
at System.String.System.IConvertible.ToBoolean()
at System.Convert.ToBoolean()
at AdvancedConfig.Ӓ.֘()
at AdvancedConfig.Ӓ.ը()
at System.Windows.Forms.Form.OnLoad()
at System.Windows.Forms.Form._SetVisibleNotify()
at System.Windows.Forms.Control.set_Visible()
at System.Windows.Forms.Application.Run()
at AdvancedConfig.ִ.ֿ()
Click to expand...
Click to collapse
Wasn't something like this discussed HERE
Watch out for post #76 in this thread...
Also watch out for post #85 for the correct value
Olioaglio
Ok I saw the posts. Unfortunately the solution is too advanced for a noob like me.
Just flashed to TNT 2.0 Pro ROM and solved my problem
we poor guys trying to upgrade our HP IPAQ hx2000 series with AKU 3.5
There is a solution available in a Russian Websites, but we couldn't understand,
we we try to download the ROM and install it gives an error saying "Digital Sign Mismatch"
I see some comments on "Digital Sign Mismatch" again I couldn't understand,
can any one from this site can help us?
here is the forum
http://4pda.ru/forum/index.php?showtopic=35871&st=330
I appreciate all of your response
try to translate with google language tools:
http://translate.google.com/transla...&hl=en&ie=UTF-8&oe=UTF-8&prev=/language_tools
helps that you can read at least - but translation is awful
your handset must be set to bootloader mode first.
hi,
How do I get the boot loader mode?
press button #2, button #4 and "reset" simultaneously.
Hi,
I got the boot loader, I see a message called "USB is connected" in the iPAQ, but when I run hpruu.exe I got error "ERROR: 503" saying active sync is not connected
Any idea?
Find the right way!
Please push "calender" after you enter the boot loader mode.
anavas said:
Hi,
I got the boot loader, I see a message called "USB is connected" in the iPAQ, but when I run hpruu.exe I got error "ERROR: 503" saying active sync is not connected
Any idea?
Click to expand...
Click to collapse
Dear Anavas,
Please try
http://forum.xda-developers.com/showthread.php?t=326214&page=2
I already place step by step procedure. Good luck
hi edcom,
I appreciate your reply
thank you
hi to all!
I am writing to you because I have a problem, I followed the tutorial to the letter relocker the bootloader, once done, I have a message "security warning" that appears below "relocked ".
I reboot bootloader the message disappears, so I launch the RUU SFR and there it gets complicated, "error 140" problem with the bootloader! I cracked it's almost 2:00 I looking for a solution, but nothing works, I can not even unlock this one - 'over the phone does not even load connected to the PC and can not access the recovery...
this is to install the ROM Maximus JB
Please help me!!
(translated with google)
srtdesign said:
hi to all!
I am writing to you because I have a problem, I followed the tutorial to the letter relocker the bootloader, once done, I have a message "security warning" that appears below "relocked ".
I reboot bootloader the message disappears, so I launch the RUU SFR and there it gets complicated, "error 140" problem with the bootloader! I cracked it's almost 2:00 I looking for a solution, but nothing works, I can not even unlock this one - 'over the phone does not even load connected to the PC and can not access the recovery...
this is to install the ROM Maximus JB
Please help me!!
(translated with google)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1920546&page=2
Hi there
It's been two days that I want to unlock my Poco f3 bootloader with mi tool but i can't, i've been very frustrated, i am worried if i'm stuck with official rom! could you please help me, I've searched google and the forums and tried a lot of workarounds but nothing works.
So first issue is that i do not receive the sms verefication when i log in to MI tool.
Then I tried the QR code method, i scanned it, openned the URL and allowed sign in. MI tool says local verefication is done, and wants me to relogin, I click on the login button and the tool starts loading but won't load anything!
After that, i tried loging in with facebook, it showed me an error and i clicked on not now, and it showed me a login page, i tried loging in and it logged in successfully!
however, once i connect my phone in fastboot mode to my computer, the tool shows "checking phone status" then says "unknown error 1004, try again later)
Is the mi tool service down or i'm doing something wrong. I tried with two accounts so far.
I've had a similar problem if the if you can't sign in while you're in fast Boot and you have the mi tool open use another phone to try to get the verification that's what I had to do and then you can sign in with the mi tool , I just used Google voice so there was no need for another phone but that's what I did
jefffrom said:
I've had a similar problem if the if you can't sign in while you're in fast Boot and you have the mi tool open use another phone to try to get the verification that's what I had to do and then you can sign in with the mi tool , I just used Google voice so there was no need for another phone but that's what I did
Click to expand...
Click to collapse
Sorry I got confused a bit, do you mean that i have to go to fast boot on my phone and it needs to be connected to the pc, and then try to sign in with mi tool?
because the way i do it, i have the phone on, i try to sign in first, so i can scan the QR code or get the SMS code.
maybe it is a problem with the drivers, try to download the ones from that guide and connect the phone in normal mode (allow usb debug when the message appears) and also connect it in fastboot mode so that it recognizes the drivers
https://www.getdroidtips.com/unlock-bootloader-poco-f3/
viroxnet said:
maybe it is a problem with the drivers, try to download the ones from that guide and connect the phone in normal mode (allow usb debug when the message appears) and also connect it in fastboot mode so that it recognizes the drivers
https://www.getdroidtips.com/unlock-bootloader-poco-f3/
Click to expand...
Click to collapse
no luck.
mi unlock tool does not send me my sms verefication and when i login with qr code it just gets stuck in loading screen
oasis1701 said:
no luck.
mi unlock tool does not send me my sms verefication and when i login with qr code it just gets stuck in loading screen
Click to expand...
Click to collapse
Send image
Rstment ^m^ said:
Send image
Click to expand...
Click to collapse
so first i open mi unlock tool on pc and then click i agree, and then on the button that shows the qr code.
then i go to my phone, settings, mi account, scan qr code, and i scan the code on the screen, and click sign in when it prompts me to. then this screen appears: https://www.dropbox.com/s/1zthjiod03fotwd/Screenshot 2022-05-12 20.33.30.png?dl=0
then i click on the text that says login and this shows up: https://www.dropbox.com/s/5kyepva0zdc6m34/Screenshot 2022-05-12 20.33.47.png?dl=0
and just stays there forever
maybe version? in the images it is different from the current one.
Sometimes is windows permission, use the app in your desktop and execute as administrator
https://miuirom.xiaomi.com/rom/u1106245679/6.5.224.28/miflash_unlock-en-6.5.224.28.zip
viroxnet said:
maybe version? in the images it is different from the current one.
Sometimes is windows permission, use the app in your desktop and execute as administrator
https://miuirom.xiaomi.com/rom/u1106245679/6.5.224.28/miflash_unlock-en-6.5.224.28.zip
Click to expand...
Click to collapse
tried with this version too, still no luck. in fact when i use this version it wants me to update to another latest version.
IS the message "relogin to your account" normal? does it happen for all QR logins?
oasis1701 said:
tried with this version too, still no luck. in fact when i use this version it wants me to update to another latest version.
IS the message "relogin to your account" normal? does it happen for all QR logins?
Click to expand...
Click to collapse
maybe the problem is the account on the phone, try to delete the account and add it again.
On the phone and in the app you must log in with the same method (hopefully with the phone number)
viroxnet said:
maybe the problem is the account on the phone, try to delete the account and add it again.
On the phone and in the app you must log in with the same method (hopefully with the phone number)
Click to expand...
Click to collapse
thanks for helping
I signed out from mi account in the phone, rebooted, then signed back in. though interestingly enough, it did not ask me for my password but signed in without it. i had to turn on find my device and that one asked for the password though.
But again it didn't work for me same things keep happening
Hi there. A couple of days ago I was dealing with the same issues you're dealing with now. Here is some input which might help you and others who are currently stuck at the loading screen:
First, notice that there's a log file created by Mi Unlock on your computer which, at any rate, may help you mitigatating any issues. The file is located at:
C:\Users\YourUserName\AppData\Roaming\Xiaomi\miflash_unlock\Log\miflash_unlock.log
The error 1004 is, as far as I know, related to the unlockAPI being unreachable. Specifically, the QR login method results in an 401 error and for this reason, the loading page gets stuck.
Ditch the QR login method and instead log in with your password (the default method). If the SMS verification screen appears, wait for 60 seconds (there should be a timer indicating that) and click on RESEND. In my case, it was the second attempt that worked and the SMS transmitted successfully.
Now, as everybody else, I assumed this login method wouldn't work, as previously there were reCAPTCHA issues. That's probably why everyone recommended the QR method. In any event, as of today, this method should work again and might get you logged in successfully, without receiving the 1004 error.
I'm afraid there is the possibility that you'll need to wait for another 168 hours as you logged out of your account on the POCO F3. If that's the case, try next week the same aforementioned method again. If that doesn't work, try the QR method.
Good luck!
EDIT: Clarifications and formatting.
I also face the same problem earlier this month! I think I try a different version and the older version is working for me with the QR code solution. Good luck!
I have a similar problem. I tried different versions of the unlock tool (5.5.224.24, 6.5.224.28, 6.5.406.31) and I get the same error (Local verification has been completed please re-login your account) when checking the authentication with a barcode. Clicking on Login button doesn't do anything.
However, I can log in with an email address or phone number and SMS verification works. If I try to unlock the device i get an error Couldn't unlock. Please rebind and try again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also the driver for the Fastboot connection is the original Xiaomi.
If it helps anyone, there is a log file of the unlock tool on https://www.miamit.si/miflash_unlock.log
i got same issue, i got error 1004. i was try every method and got 1 solution and maybe can help. first to know i only one laptop running windows 10 and already have miunlock tool and has been install all driver. first try to Disable Driver Signature (you can find how to do on google) and restart. after boot reinstall driver you have, if you have miflash you can reinstall driver from that, make sure windows ask you to have permission to install driver. and last step try to open miunlock (my miunlock is latest version) and login to your account for unlocking, recommend to login using email or facebook to avoid SMS verification. if you can login you can see your error status at miunlock homescreen,if status error is not showing now you can unlock your bootloader. i hope my method can help everybody. good luck
185F8DB3227 said:
Hi there. A couple of days ago I was dealing with the same issues you're dealing with now. Here is some input which might help you and others who are currently stuck at the loading screen:
First, notice that there's a log file created by Mi Unlock on your computer which, at any rate, may help you mitigatating any issues. The file is located at:
C:\Users\YourUserName\AppData\Roaming\Xiaomi\miflash_unlock\Log\miflash_unlock.log
The error 1004 is, as far as I know, related to the unlockAPI being unreachable. Specifically, the QR login method results in an 401 error and for this reason, the loading page gets stuck.
Ditch the QR login method and instead log in with your password (the default method). If the SMS verification screen appears, wait for 60 seconds (there should be a timer indicating that) and click on RESEND. In my case, it was the second attempt that worked and the SMS transmitted successfully.
Now, as everybody else, I assumed this login method wouldn't work, as previously there were reCAPTCHA issues. That's probably why everyone recommended the QR method. In any event, as of today, this method should work again and might get you logged in successfully, without receiving the 1004 error.
I'm afraid there is the possibility that you'll need to wait for another 168 hours as you logged out of your account on the POCO F3. If that's the case, try next week the same aforementioned method again. If that doesn't work, try the QR method.
Good luck!
EDIT: Clarifications and formatting.
Click to expand...
Click to collapse
Thank you, this helped me quite a lot. I waited another day and the sms verefication works now.
The fact that the sms and QR method didn't work for 24 hours throw me off, now i know that the QR method is broken.