Hi all members,
I dont know anything much about develpoment, I have ZE551ML 32gb version. I rooted my phone and it was working fine until i installed layers manager from playstore and applied new layers and instantly after restarting the phone was struck on bootloop .. So after searching a bit i managed to open the phone in fastboot mode .
after then i did a factory reset and restarted the phone but the problem of bootloop was still there .. so after searching more i decided to install a custom rom, for that i first used adb tools to flash a twrp recovery in fastboot mode and when i try to enter in recovery mode the phone restarts and enters the fastboot screen itself not on recovery screen. So for me there is not way to enter in recovery mode . So someone please help me and repair my phone i will be very grateful.
Yea you can only install layers for roms that support them. stock doesn't support it. is your bootloader unlocked? if not first do then that try flashing a recovery again.
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Good to hear you got it up and running.
derpaherp said:
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Click to expand...
Click to collapse
hey - how did you get mi unlock to work? im having this problem: mi unlock tool 2.3.803.10. it won't show the mi mix 2 as connected with xiaomi drivers, only with google drivers it will show as connected and then let me click unlock. however, it stops at 50% and shows error "couldnt verify device unkown error (-1)". ive logged on to i.mi.com and located the device through find device. does anyone have any pointers how i can unlock, because i want to switch to global dev rom and miui updater wont let me update through system with error "android version is different".
best, alastair
Hello All,
I have Honor 8 Pro from 1 year now and i have been using Custom ROMs (Thanks to the Developers here) from very long. I was using OpenKirin ROM and then when Android P was release I used FFW to get the latest one and tried to upgrade the phone (thinking that i know everything ).
And the result was catastrophic! Now my phone only boots to recovery mode and if i try to do recovery, it fails.
Current status (Attached Screenshots for reference):
Bootloader locked : says "PHONE locked"
Tried HCU: cannot see any phone info other than Serial number
I have DC-Phoenix+HCU 3 days pack. So please let me know if something can be done to revive my phone. Please let me know if someone can help.
Hi, did you recover your phone finally.? Actually mine also stuck with same problem but the only difference is my phone status shows phone BOOTLOADER Unlock, FRP - UNLOCK.
Unable to do anything but am able to flash twrp and have Access in twrp but unable to flash anything coz all partitions are deleted. Shall I keep any hopes.??
This is old but it might help.
https://forum.xda-developers.com/honor-8-pro/how-to/unbrick-device-revert-to-stock-complete-t3802298
hello guys. after a update my redmi note 8 pro (global) cannot boot. i can only get on fastboot but i never open my bootloader. i cannot get to recovery mode with vol up + power no matter how hard i try. what can i do? i cannot flash from mitool with locked bootloader i guess cause i get a stupid error.
Unlock the bootloader first.
https://en.miui.com/unlock/
It's pretty easy to fix if you can enter into fastboot mode but in my case situation is very different my device is completely dead/hard brick just notification light blinks, & only the solution is to get the MI Authorized Account & i don't have :crying: if Someone can help me please help
try with EDL mode ..
you can flash without unlock bootloader
it only works if you are actually updating from your own device and not by manual updating because you chose the MIUI ROM file incorrectly
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
HEllo could help my on teamviewer?
seser111 said:
HEllo could help my on teamviewer?
Click to expand...
Click to collapse
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
djgilquirino said:
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
Click to expand...
Click to collapse
It's hard bricked. I tried sp flash tool it requires authorized account.
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
TheMalachite said:
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
Click to expand...
Click to collapse
That's the problem. I didn't know why I bricked my phone while flashing A9. It just didn't boot after rebooting my phone. I think as long as you flashed A9, you can proceed to flash the preloader and lk and unbrick it.
Same pproblem
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
I have same problem like you. How did you flash when your RM8P is hard brick? I try same things like youtube, but my cmd windows just close immediately. And if I move fastboot tool in the rom folder, cmd window didn't close but doing nothing. How did you do that?
My RN8P don't have recovery or fastboot.
thanks
thank you very much, my phone is resurrected. ?❤
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Benedict Cumberbatch said:
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Click to expand...
Click to collapse
Well I pointed out that it was just a possible way and not an absolute way on unbricking my phone. And I guess you're right about my phone being softbricked and I apologize for that mistake. Cheers
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
In soft bricks, you can access recovery or fastboot or both, and easily flash the stock ROM, but you have mentioned above that your phone was hard bricked, there is almost no way to unbrick a hard bricked RN8P without authorized account, even if you do, its very likely it was once in a million chance that it got flashed, best way to recover a hard bricked RN8P is to not mess it up more and take it to service center right away.
Help please!!
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond. :crying::crying:
---------- Post added at 12:50 PM ---------- Previous post was at 12:37 PM ----------
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Hey, my redmi 4a is soft bricked, please guide me how to fix it. I'm like a noob, so i need A to Z guide
Hey my
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
Hey, my redmi 4a is soft brick,
Can you guide me from beginning?
megaros said:
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Click to expand...
Click to collapse
Would you be so kind as to maybe PM that # to me? Ive been trying to get mine unbricked for probably over a year now and havent had any luck even finding a place or person to do the unlock.... I would really appreciate it...
U mnie zadziałał ten sposób
.
namurnik said:
U mnie zadziałał ten sposób
.
Click to expand...
Click to collapse
No widze ze dobrze to wyglada , powiedz mi tylko czy miales naprawde HARDBRICK , czy tylko SOFTBRICK , ?
Well I see it looks good, just tell me if you had a really HARDBRICK or just a SOFTBRICK?