Develop Bugs

Samsung SHW-M110S [Galaxy S] KitKat PatchTool, 3.0 Kernel

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/* Developers */
- arter97
- sktjdgns1189
- sch2307
- Special Thanks to Dokdo
- Special Thanks to Prizm
/* Bugs */
- Mic is not working except within call.
- Phone is not ringing when incoming call.
* Due to messaging fixes, telephony patches are only available to CyanogenMod ROMs.
* Telephony is not working on pure AOSP based ROMs like SuperNexus.
* To use on ROMs not CyanogenMod, you have to manually compile your own telephony-common.jar
/* Caution */
- Repartitioning process is done while installing, your device can get to a hard bricked status if shutdowns unexpectedly.
- Developers are not responsible for any damages.
- m110s-format-data is not required; it's only for data formatting, replacing CWM menu.
- Use your device 30 secs after boot. If you use your device while it got no carrier registered on the lock-screen, telephony might not work properly.
/* Downloads */
http://www.sayanogen.com/file/2271
/* Installation method */
1. Flash m110s-EFS_Backup-recovery.tar via ODIN
2. Reboot to recovery and install M110S_EFSBackupTool.zip.
3. Reboot to system, then connect to PC and pull /sdcard/efsbackup/efs
4. Flash m110s-installation-recovery.tar via ODIN.
5. Reboot WITHOUT ANY BUTTON PRESSED and it will reboot straight to recovery.
6. Install m110s-format-system.zip. It will erase all of your data and repartition your device.
7. Install your desired KitKat ROM.
8. Install M110S_PatchTool.zip.
9. Install Gapps for Android 4.4, KitKat.
10. Reboot and enjoy

DOWNLOADS for Patching
m110s-EFS_Backup-recovery.tar
M110S_EFSBackupTool.zip
m110s-installation-recovery.tar
m110s-format-system.zip,
M110S_PatchTool.zip, or HERE​
all credits for above patch due to -
@arter97
@sktjdgns1189
@sch2307
Special Thanks to Dokdo
Special Thanks to Prizm
Woooo, nice job,Thank you guys.and @sktjdgns1189. First M110S development thread, in three years in XDA forum, amazing. :victory: So basically by doing the installation procedures, you can flash any Kit Kat ROM, but ringtone is not working, is that correct?
Before I post about this in the M110S forum, can this procedure be better explained? so that we won't have too many problems/ screw-ups to handle
Edit: its say 8 attachments, but only seven links, is there something missing in image
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
Woooo, nice job,Thank you guys.and @sktjdgns1189. First M110S development thread, in three years in XDA forum, amazing. :victory: So basically by doing the installation procedures, you can flash any Kit Kat ROM, but ringtone is not working, is that correct?
Before I post about this in the M110S forum, can this procedure be better explained? so that we won't have too many problems/ screw-ups to handle
Edit: its say 8 attachments, but only seven links, is there something missing in image
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Yes, you can any kitkat rom, but ringtone is not working.
Sorry to bad english ..
hidden attachment is the Image.[Screenshot]
Thanks

sktjdgns1189 said:
Yes, you can any kitkat rom, but ringtone is not working.
hidden attachment is the Image.[Screenshot]
Thanks
Click to expand...
Click to collapse
Great, another question, before I call it a day, steps 1 to 3 in installation procedure is just for backing up efs folder?
1. Flash m110s-EFS_Backup-recovery.tar via ODIN
2. Reboot to recovery and install M110S_EFSBackupTool.zip.
3. Reboot to system, then connect to PC and pull /sdcard/efsbackup/efs
Click to expand...
Click to collapse
which can be done by other methods too and many already have a efs backup of their device , so can this be skipped? or does this do some other magic?
sorry to ask , as I may have to answer about it in the M110S threads. good night.
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
Great, another question, before I call it a day, steps 1 to 3 in installation procedure is just for backing up efs folder?
which can be done by other methods too and many already have a efs backup of their device , so can this be skipped? or does this do some other magic?
sorry to ask , as I may have to answer about it in the M110S threads. good night.
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Yes, steps 1 to 3 in installation procedure is just for backing up efs folder.
We have made it for people who do not know how to backup efs.
May be other ways to back up your efs, But we recommend that way.
Because EFS contains IMEI..
If you do not back up EFS, the phone is impossible.
Thank you

Anyone tried this? results?
Check this out! Links to useful Guides and " Banned " Documentaries ​

plz make a tutorial, with rom and download? its smooth using kitkat on shw m110s?

Good News
For those interested in this, this patch will work , when the CM based ROM is packaged with the Gapps and it performed well without glitches ( but with the mentioned bugs) on [ROM][4.4.2][SHW M110S] Resurrection Remix® 4.4.2 KitKat v5.0.1 by @rodman01
Also such a release can be used for SHW M190S also with this patch
Follow this [Tutorial] How to flash Kit Kat on Korean Galaxy S / M110S using Kit Kat Patch
Check this out! Links to useful Guides and " Banned " Documentaries ​

@arter97, @sch2307, @sktjdgns1189
guys, your website is down
I am getting PMed about it, can you guys check or provide a mirror for downloads?
or do you want me to attach it here?
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
DOWNLOADS for Patching
m110s-EFS_Backup-recovery.tar
M110S_EFSBackupTool.zip
m110s-installation-recovery.tar
m110s-format-system.zip,
M110S_PatchTool.zip, or HERE​
all credits for above patch due to -
@arter97
@sktjdgns1189
@sch2307
Special Thanks to Dokdo
Special Thanks to Prizm
Woooo, nice job,Thank you guys.and @sktjdgns1189. First M110S development thread, in three years in XDA forum, amazing. :victory: So basically by doing the installation procedures, you can flash any Kit Kat ROM, but ringtone is not working, is that correct?
Before I post about this in the M110S forum, can this procedure be better explained? so that we won't have too many problems/ screw-ups to handle
Edit: its say 8 attachments, but only seven links, is there something missing in image
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Is there any kernel source for this? f2fs in this kernel looks worth to try :good: I saw arter97 patch in hellybean s3 kernel, but still no luck for me to compile it in aries kernel
Can I format to f2fs from cwm came with this kernel? or need to use the format-system zip?

didhiy said:
Is there any kernel source for this? f2fs in this kernel looks worth to try :good: I saw arter97 patch in hellybean s3 kernel, but still no luck for me to compile it in aries kernel
Can I format to f2fs from cwm came with this kernel? or need to use the format-system zip?
Click to expand...
Click to collapse
Sorry, did not have any response from OP or any of his associates.
kernel source link was posted and mentioned here
it does not work when formatted by CWM and only worked when using system format zip
Check this out! Links to useful Guides and " Banned " Documentaries ​
http://forum.xda-developers.com/showpost.php?p=50825700&postcount=70

On which rom phone ringigng voice works perfect? Thanks

headphones/headset issue
Hi ppl,
you may already know that some people experience the issue with mute headphones. I found that the issue may be masked at ALSA level with changing of "Playback Path" control (details).
Anyone have ideas how to fix this issue?
Thanks in advance.
---------- Post added at 01:44 AM ---------- Previous post was at 01:41 AM ----------
blackrose1 said:
On which rom phone ringigng voice works perfect?
Click to expand...
Click to collapse
Ringer problem is solved with installing of Ringtone.apk, may be found in RR thread.

Broken XDA links

I was reading some posts about samsung and discovered some broken links of XDA. can they be fixed?
Those links goes to the post where they linked to XDA xposed modules
[APP][6.0+] XTouchWiz | Customize your Stock Samsung Roms
This module supports Samsung TouchWiz Marshmallow 6.0+ Rom only. XTouchWiz includes the most important features IMHO, I have no plans for the theming/coloring features, so please no need to ask for them. Wanam Xposed was a big project that i...
forum.xda-developers.com
[XPOSED][Q] Firefds Kit 10.0.4.0-STABLE-12 - Customize Samsung OneUI 2.x [28/04/22]
Version for Marshmallow is available here: https://forum.xda-developers.com/xposed/modules/app-xtouchwizs5-customization-touchwiz-t3372401 Version for Nougat is available here...
forum.xda-developers.com

evildog1 said:
I was reading some posts about samsung and discovered some broken links of XDA. can they be fixed?
Those links goes to the post where they linked to XDA xposed modules
[APP][6.0+] XTouchWiz | Customize your Stock Samsung Roms
This module supports Samsung TouchWiz Marshmallow 6.0+ Rom only. XTouchWiz includes the most important features IMHO, I have no plans for the theming/coloring features, so please no need to ask for them. Wanam Xposed was a big project that i...
forum.xda-developers.com
[XPOSED][Q] Firefds Kit 10.0.4.0-STABLE-12 - Customize Samsung OneUI 2.x [28/04/22]
Version for Marshmallow is available here: https://forum.xda-developers.com/xposed/modules/app-xtouchwizs5-customization-touchwiz-t3372401 Version for Nougat is available here...
forum.xda-developers.com
Click to expand...
Click to collapse
Both links work for me as seen in attached screenshots.
Spoiler: Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Oswald Boelcke said:
Both links work for me as seen in attached screenshots.
Spoiler: Screenshots
View attachment 5335639
View attachment 5335637
Click to expand...
Click to collapse
Maybe evildog1 meant the links included within the linked posts? If this is the case, they are probably broken links caused by the move to XenForo, possibly needing a fix with the new XF url format?

woodman said:
Maybe evildog1 meant the links included within the linked posts? If this is the case, they are probably broken links caused by the move to XenForo, possibly needing a fix with the new XF url format?
Click to expand...
Click to collapse
Upps, you're right. @evildog1 Sorry, I misread your post.
And affirmative, all the links in the two quoted posts are broken and simply refer to
Xposed General
Use this forum to chat about xposed framework and modules to modify your device without flashing a custom ROM
forum.xda-developers.com
However, there's a workaround to go to the actual thread or post that were supposed to be linked as the number at the end of the URL is the important part.
If you take the example from the link in this post:
[APP][6.0+] XTouchWiz | Customize your Stock Samsung Roms
This module supports Samsung TouchWiz Marshmallow 6.0+ Rom only. XTouchWiz includes the most important features IMHO, I have no plans for the theming/coloring features, so please no need to ask for them. Wanam Xposed was a big project that i...
forum.xda-developers.com
The link is:
https://forum.xda-developers.com/xposed/modules/xposed-firefds-kit-customization-t3908114
Now simply reduce this to (please note that the t must be separated from the number by a /)
https://forum.xda-developers.com/t/3908114
Above will then refer you to the thread or post, which new URL under Xenforo is:
https://forum.xda-developers.com/t/...-15-customize-samsung-oneui-10-01-21.3908114/
or as plain:
https://forum.xda-developers.com/t/xposed-pie-firefds-kit-9-1-0-5-stable-15-customize-samsung-oneui-10-01-21.3908114/
You find the important number at the end again after the dot.
Don't know if the admins can run a script to repair all broken ones? @MikeChannon

woodman said:
Maybe evildog1 meant the links included within the linked posts? If this is the case, they are probably broken links caused by the move to XenForo, possibly needing a fix with the new XF url format?
Click to expand...
Click to collapse
That's right! Sorry for my bad english
Oswald Boelcke said:
Upps, you're right. @evildog1 Sorry, I misread your post.
And affirmative, all the links in the two quoted posts are broken and simply refer to
Xposed General
Use this forum to chat about xposed framework and modules to modify your device without flashing a custom ROM
forum.xda-developers.com
However, there's a workaround to go to the actual thread or post that were supposed to be linked as the number at the end of the URL is the important part.
If you take the example from the link in this post:
[APP][6.0+] XTouchWiz | Customize your Stock Samsung Roms
This module supports Samsung TouchWiz Marshmallow 6.0+ Rom only. XTouchWiz includes the most important features IMHO, I have no plans for the theming/coloring features, so please no need to ask for them. Wanam Xposed was a big project that i...
forum.xda-developers.com
The link is:
https://forum.xda-developers.com/xposed/modules/xposed-firefds-kit-customization-t3908114
Now simply reduce this to (please note that the t must be separated from the number by a /)
https://forum.xda-developers.com/t/3908114
Above will then refer you to the thread or post, which new URL under Xenforo is:
https://forum.xda-developers.com/t/...-15-customize-samsung-oneui-10-01-21.3908114/
or as plain:
https://forum.xda-developers.com/t/xposed-pie-firefds-kit-9-1-0-5-stable-15-customize-samsung-oneui-10-01-21.3908114/
You find the important number at the end again after the dot.
Don't know if the admins can run a script to repair all broken ones? @MikeChannon
Click to expand...
Click to collapse
Thanks, it helped a lot
Hope this can be fixed

evildog1 said:
That's right! Sorry for my bad english
Thanks, it helped a lot
Hope this can be fixed
Click to expand...
Click to collapse
Yes, these are easy for an OP to fix or a Moderator, assuming there are not hundreds of them of course.
As said above one that ends with e.g.
..........pers.com/xposed/modules/xposed-firefds-kit-customization-t3908114 can be changed to
..........pers.com/t/xposed-pie-firefds-kit-9-1-0-5-stable-15-customize-samsung-oneui-10-01-21.3908114/
Possibly even easier just copy the number at the end insert t/ after developers.com and paste in the number (all that extra writing and sub forum stuff is redundant, all it needs is the /t/ part and the number. So in the above example you can use:
....................opers.com/t/3908114
That works just as well. (/t/3908114 is what it needs, not all the other wording.) Forum links work in the same way except they need /f/ instead of /t/
If there are hundreds of these, I can see if someone can script something but it might not be quick or get priority.
Mike

ANDROID 12L ROM ❯ 02 May 2022 ❯ ProtonAOSP 12.3.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ProtonAOSP​Android 12 ROM for Pixel 2 - Maintained by @EnesSastim​
Spoiler: SPECIAL THANKS TO
@Lunarixus on XDA (using his device tree, mentorship, and fixes. Wonderful work)
@RealOkabe on XDA for his build process, we only reached bootable state thanks to his work.
@ReallySnow on XDA for his work on Android 12 vendor. I consider him my teacher, and most of the Android 12 heavy lifting was done by him.
None of this would've happened without them.
ProtonAOSP is a minimal Android fork (custom ROM) focused on UI/UX and performance, with a touch of privacy.
Screenshots are attached.
​
What's not working: ​
You tell me... post logcats using my tool in this thread or you may get support in Telegram: Pixel Development & Pixel 2 chat​
Click to expand...
Click to collapse
Download
Download from here: Source Forge
This does not include OTAs, so you will have to visit regularly for security updates and the like.
Installation
This ROM is currently distributed as OTA zips. Flash it the same way you would, in a custom recovery. Don't forget to wipe all data using "fastboot -w" or using my tool before booting the ROM.
Click to expand...
Click to collapse
Sources
ProtonAOSP: Github & build guide
Walleye: Github
Wahoo: Github
Vendor: Github
Kernel: Github
Click to expand...
Click to collapse

reserved ig

Excellent omw to flash now brb

XS37 said:
Excellent omw to flash now brb
Click to expand...
Click to collapse
i beg, let me know how it goes

just finishing backup downloads done fingers crossed no probs <3

recieve a bootloader error bootlinux failed:bad buffer size
Edit: and rebooting changes slot and gives slot unbootable error tried a
reflash aswell unsure
caught the first bit of the log before it scrolled but it seems to flash fine with no problems but gives bad buffer on first boot

XS37 said:
recieve a bootloader error bootlinux failed:bad buffer size
Edit: and rebooting changes slot and gives slot unbootable error tried a
reflash aswell unsure
caught the first bit of the log before it scrolled but it seems to flash fine with no problems but gives bad buffer on first boot
Click to expand...
Click to collapse
i also got this issue

Edited the thread with new build, try

Dollscythe said:
Edited the thread with new build, try
Click to expand...
Click to collapse
This build still fails for me with the same messages as XS37 above

aw... working on it. i dont have a walleye so its hard to test, so doesnt @RealOkabe (person building the rom)

Dollscythe said:
aw... working on it. i dont have a walleye so its hard to test, so doesnt @RealOkabe (person building the rom)
Click to expand...
Click to collapse
well with donations and support we shall work on getting one for you hopefully both the xl and non for support

XS37 said:
well with donations and support we shall work on getting one for you hopefully both the xl and non for support
Click to expand...
Click to collapse
How much is a used Pixel 2 in your area? Here in Australia they’re going for ~120 AUD & I’d definitely be willing to support you guys

notsidney said:
How much is a used Pixel 2 in your area? Here in Australia they’re going for ~120 AUD & I’d definitely be willing to support you guys
Click to expand...
Click to collapse
I'm in AUS. How can we do it!!!

Any news about this rom on walleye?
Thank you!!

Yes waiting for the walleye support

Hello, many thanks for this works, unfortunatly i missed the link.
2 questions, can you send me link to donate for the walleye developpement of this proton aosp unofficial rom ?
Also, is this would work with locked bootloader ? or does not making sens with the configuration of vendor from 11 etc...
Also if u have another test build could you provide it.
Thanks.

elggpxl said:
Hello, many thanks for this works, unfortunatly i missed the link.
2 questions, can you send me link to donate for the walleye developpement of this proton aosp unofficial rom ?
Also, is this would work with locked bootloader ? or does not making sens with the configuration of vendor from 11 etc...
Also if u have another test build could you provide it.
Thanks.
Click to expand...
Click to collapse
Currently the ROM is in in unknown state @Dollscythe is trying their best to fix it so no links are currently available as the ROM wasn't currently usable and and no nothing is flashable if your bootloader is locked for anything to be flashable your bootloader must be able to be unlocked or set in unlocked mode otherwise the device is unflashable and to donate to them its PayPal and the link

XS37 said:
Currently the ROM is in in unknown state @Dollscythe is trying their best to fix it so no links are currently available as the ROM wasn't currently usable and and no nothing is flashable if your bootloader is locked for anything to be flashable your bootloader must be able to be unlocked or set in unlocked mode otherwise the device is unflashable and to donate to them its PayPal and the link
Click to expand...
Click to collapse
Ok thanks, i was talking about re-locking feature, iam new as forum member but its years now that iam flashing on several devices.

elggpxl said:
Ok thanks, i was talking about re-locking feature, iam new as forum member but its years now that iam flashing on several devices.
Click to expand...
Click to collapse
I wouldn't recommend re-locking it but I know on the original you could but I would wait until @Dollscythe finishes up if they get the chance as things happen and they are supporting a phone they don't have so time is needed give them a few days hopefully they get a chance and they can answer better then I can as they are building it

XS37 said:
I wouldn't recommend re-locking it but I know on the original you could but I would wait until @Dollscythe finishes up if they get the chance as things happen and they are supporting a phone they don't have so time is needed give them a few days hopefully they get a chance and they can answer better then I can as they are building it
Click to expand...
Click to collapse
Ok many thanks, no rush at all really, this would be perfect to have at least one stable build with this feature and the classics proton aosp options (more option on the permission manager, the press squeeze, and other things). after all (to me) all will be good.

Development [RECOVERY][UNOFFICIAL] TWRP for Galaxy S21 FE (Exynos)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S21 FE G990E
Download & Guide:
1. Unlock your bootloader.
2. Download S21 FE: r9s.
3. Reboot to download mode
4. Put the TWRP TAR for your device with Odin in the AP slot, vbmeta_disabled_R.tar in USERDATA slot and click start.
5. Reboot to recovery via recovery key combo (Vol up + power + USB connected).
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.​If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.​- Type: multidisabler again. will see - Finished. when done.​- Go back to Wipe > Format Data > type yes.​- Reboot to recovery.​7. Flash magisk apk in twrp.
8. Reboot to system, Enjoy.
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@ianmacd for multidisabler
Sources:
Kernel tree
Device tree

Changelog:
26.03.2022 - Initial Release.

Hey, glad to see something on development, thanks for that !
I hope someone will work soon on Snapdragon variants

Doghan13 said:
Hey, glad to see something on development, thanks for that !
I hope someone will work soon on Snapdragon variants
Click to expand...
Click to collapse
contact me on telegram @ afaneh92 for testing

@afaneh92 I don't know if I am totally dumb or if Telegram (app version) don't permit to PM somebody who don't appear in contacts, but even in XDA channel, I dont find your name. Mediafire link in XDA forum PM isn't possible and easier ?
Mine is Doghan13 on Telegram and I would be honored to give a try to your TWRP.

Doghan13 said:
@afaneh92 I don't know if I am totally dumb or if Telegram (app version) don't permit to PM somebody who don't appear in contacts, but even in XDA channel, I dont find your name. Mediafire link in XDA forum PM isn't possible and easier ?
Mine is Doghan13 on Telegram and I would be honored to give a try to your TWRP.
Click to expand...
Click to collapse
Wrong name or id.
Just join my telegram group and ask.

Glad to see our beloved S21FE growing
Thanks for the time you spent on this
It was a great necessity for all future developments
Can I install it without wiping data?
I'm coming from galaxy s3 and I feel like I'm a noob in new android world order

mahpooya said:
Glad to see our beloved S21FE growing
Thanks for the time you spent on this
It was a great necessity for all future developments
Can I install it without wiping data?
I'm coming from galaxy s3 and I feel like I'm a noob in new android world order
Click to expand...
Click to collapse
Wipe is mandatory

afaneh92 said:
Wipe is mandatory
Click to expand...
Click to collapse
hello sir. i am looking to unlock my bootloader for at&t variant
please let me know

Ahlebiak1 said:
hello sir. i am looking to unlock my bootloader for at&t variant
please let me know
Click to expand...
Click to collapse
Not supported yet

Anyone tried to flash the SM-G990B with this?
Supported models says only 990E but from a hardware point of view they are exactly the same. I would try it myself but I'm on vacation with a ****ty connection, if it fails downloading stock and re-flashing would take me weeks

Discorly said:
Anyone tried to flash the SM-G990B with this?
Supported models says only 990E but from a hardware point of view they are exactly the same. I would try it myself but I'm on vacation with a ****ty connection, if it fails downloading stock and re-flashing would take me weeks
Click to expand...
Click to collapse
Um... SM-G990B is Snapdragon sir. You should be looking at this thread: https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-s21-fe-5g-snapdragon.4439941/

ShaDisNX255 said:
Um... SM-G990B is Snapdragon sir. You should be looking at this thread: https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-s21-fe-5g-snapdragon.4439941/
Click to expand...
Click to collapse
What the hell?
I blindly trusted this info: https://www.phonemore.com/specs/samsung/galaxy-s21-fe/sm-g990bds-128gb/ which says exynos
I downloaded cpu-z to make sure and it sure says snapdragon, wtf? I though snapdragon was US/China and this is a brand new swedish phone

Discorly said:
I though snapdragon was US/China and this is a brand new swedish phone
Click to expand...
Click to collapse
Lol I also thought this was the case but apparently not
Discorly said:
I blindly trusted this info: https://www.phonemore.com/specs/samsung/galaxy-s21-fe/sm-g990bds-128gb/ which says exynos
Click to expand...
Click to collapse
I guess that goes to show you that you shouldn't always trust sketchy websites (phonemore) lol. Matter of fact I think most if not all websites contain errors (including gsmarena) so it's always good to keep an open mind.

ShaDisNX255 said:
Lol I also thought this was the case but apparently not
I guess that goes to show you that you shouldn't always trust sketchy websites (phonemore) lol. Matter of fact I think most if not all websites contain errors (including gsmarena) so it's always good to keep an open mind.
Click to expand...
Click to collapse
My mind is blown. Thank you so much, this could've ended in disaster lol

not working bro , odin shows failure

grewal_saurabh said:
not working bro , odin shows failure
Click to expand...
Click to collapse
Post you errors and dont spam the thread asking for frp its not supported by me

the link isnt working

del

Where is Magisk APK?

Development [Custom ROM] [One UI 5] SlimSang Rom For [ Samsung Galaxy S21 FE ] G990E/00/0B/B2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Q) what is SlimSang?​A) SlimSang is a Custom ROM based on ONE UI for Samsung Galaxy S21 FE developed and Maintained by BurningLion​
Please read the thread carefully
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards.
Change Logs​​𝗦𝗹𝗶𝗺𝗦𝗮𝗻𝗴 𝗥𝗢𝗠 𝘃𝟲 𝗙𝗶𝗻𝗮𝗹 [Updated 12/04/2023]
Model: G990E (Minimal De-Bloat)
{ PASSWORD HAS BEEN REMOVED ALSO ALL SLIMSANG features TOO }​
*Base Updated to EWC2 & EWC1​
*Pre Rooted with magisk 26.1 [Stable]​
​
*Image Clipper Ported from S23 ​
*Adaptive refresh rate option added [In display tab - To make it work flash Advance refresh rate module by slimsang ]​
*SlimSang minimal boot animation [Change it if you want multiple options available ]​
*Custom 16Bit ringtones​
*New wallpapers​
-For Dex, Lockscreen & Graphical​
*Lockscreen clock edit bug fixed ​
*Dex working​
*Bixby Working​
*New Charging Animation [Difference for home & lock]​
*Battery Charging indicator added​
*Battery percentage bug fix on charging screen​
*Camera cutout overlay update​
*Screen Resolution Changer optimisation​
*Wearable connection delay fixed​
*Bluetooth ringtone delay fixed​
*Device model number returns to S21FE [ Before it was S23 Ultra]​
Few script tweaks ​
*Fonts collection removed [ Will be available soon as a magisk module]​
*Minimal Debloat ​
*ROM size Optimised (4.3Gb to 3.9Gb)​
*Script tweaks (csc,ff,prop etc)​
Maybe more...!​
*Installation will take some time (installation & booting process will take around 8 to 9 min)​
*Clean installation strongly recommend​
No Google restore. Take backup in Samsung cloud or root back-up or flash Gapps so you will get back the G-setup.
​
​
​Download Link & Installation ​Unlock bootloader​Install Twrp & follow all the procedures
Snapdragon Twrp & Guidance
Exynos Twrp & Guidance
>Flash BL in ODIN
#G990E BL
#G990B BL
#G9900 BL
>EXTRACT ZIP & FLASH IMAGE AS FOLLOWING
-BOOT.IMG AS BOOT
-OPTICS.IMG AS OPTIC
-SUPER.IMG AS SUPER
>Wipe data (Recommend) not compulsory
>Boot the device.
ROM: Screenshot
ROM DOWNLOAD Link
G990E
G990B
G9900
​
*Tips To Pass SafetyNet & Get play certified. ​Step 1 - Rename magisk then reboot. ​Step 2 - Enable Zygisk, Flash safetynet module & hide app you want(also play store & play services). ​Step 3 - clear data of play store. Reboot ​ Done!​​SlimSang ROM website
Kernel Source
TELEGRAM SUPPORT For Quick Response​
​​View attachment 5802779​​Spacial Thanks To Everyone Who Have Contributed To One Ui Devlopment Doesn't Matter If He/She Still Working Or Not. ​Its Not Possible To Mention Everyone But Still I Am Thankful to​@Subodh.993435 for always helping me when i need...
@TenSeventy7 for allowing me to re-brand Zest
@BlassGO @el0xren @kirbyNx & Mr.Yang.
Tester: @Billabomb75
@ Samsung - FIrmware and kernel
Developer Of SlimSang Rom : BurningLion
​
​
​

@sujayc27 Greetings. As a friendly reminder, your kernel source is required in your OP as per XDA's rules for maintaining GPL Compliancy.
Please add this within the next 5 days in order to prevent thread closure. Thank you.
-Regards: Badger50

Badger50 said:
@sujayc27 Greetings. As a friendly reminder, your kernel source is required in your OP as per XDA's rules for maintaining GPL Compliancy.
Please add this within the next 5 days in order to prevent thread closure. Thank you.
-Regards: Badger50
Click to expand...
Click to collapse
My Bad.... I will fix it!

Nice work!
Please fix lockscreen edit.
Thank you.

caltkevv said:
Nice work!
Please fix lockscreen edit.
Thank you.
Click to expand...
Click to collapse
In 5.3 it's already Fixed!

What is Advance Refresh Rate?

Mrawy said:
What is Advance Refresh Rate?
Click to expand...
Click to collapse
It's a module to Enable "Adaptive Refresh Rate" in any Samsung Device (which have multiple refresh rate) [Magisk]

May I see some screenshots please?

Billabomb75 said:
May I see some screenshots please?
Click to expand...
Click to collapse
Screenshot Option also added to the post.
Don't Forget to join our group for instant support.

Thanks for support. When we can see an aosp pixel rom? (Exynos)

MemurBey said:
Thanks for support. When we can see an aosp pixel rom? (Exynos)
Click to expand...
Click to collapse
It's my pleasure
& Regarding aosp ROM I am not sure if this gonna happen.
Atleast No plans for now!

sujayc27 said:
Screenshot Option also added to the post.
Don't Forget to join our group for instant support.
Click to expand...
Click to collapse
Looks super clean. Im tempted to load it. but gonna have to wait for warranty to be done

Billabomb75 said:
Looks super clean. Im tempted to load it. but gonna have to wait for warranty to be done
Click to expand...
Click to collapse
Ha ha ha.... Okay okay take your time buddy

sujayc27 said:
Ha ha ha.... Okay okay take your time buddy
Click to expand...
Click to collapse
Hahahah yeah, only April Next year though ;(

I don't know why people still need custom rom for this. The manufacturer rom already very good and stable

ndl318 said:
I don't know why people still need custom rom for this. The manufacturer rom already very good and stable
Click to expand...
Click to collapse
The reason why people change roms is to get rid of the bloatware and sometimes it has a performance boost and battery life is much better. Also a lot of features that you normally can't get.

ndl318 said:
I don't know why people still need custom rom for this. The manufacturer rom already very good and stable
Click to expand...
Click to collapse
Different people
Different view
Different choice
Thank you!

Billabomb75 said:
The reason why people change roms is to get rid of the bloatware and sometimes it has a performance boost and battery life is much better. Also a lot of features that you normally can't get.
Click to expand...
Click to collapse

Hi there. I have a problem, I did everything according to the instructions. First I unlocked the bootloader, installed DVL1 using ODIN. After that I installed TWRP, after that I flashed the ROM in TWRP. After that, my phone does not boot. (Dev G990B2) Attaching photo. What i did wrong?(

epsilon.archi said:
Hi there. I have a problem, I did everything according to the instructions. First I unlocked the bootloader, installed DVL1 using ODIN. After that I installed TWRP, after that I flashed the ROM in TWRP. After that, my phone does not boot. (Dev G990B2) Attaching photo. What i did wrong?(
View attachment 5808171
Click to expand...
Click to collapse
without knowing exactly what you did to your device Cannot help...
But for now I will suggest flash stock (dvl1) with odin & flash zip again.
Before flashing zip take a backup to quickly recover the device.