so i updated to OOS 10.0.9 Global on HD1900(China), but there is no patched boot or fastboot rom yet, so i patched it with his guide: guide by @gpz110
Boot.img patched with MAGISK 20.4 on OOS 10.0.9 HD65AA (GLOBAL)
Only for OOS 10.0.9 Global!!!!
Enjoy!
Instructions:
reboot to fastboot
Code:
adb reboot bootloader
Code:
fastboot boot magisk_patched_10_0_9.img
let it boot and check if u have root
if u got root then reboot to fastboot again
Code:
adb reboot bootloader
Code:
fastboot flash boot magisk_patched_10_0_9.img
patched boot.img download: https://drive.google.com/file/d/1mHbDV0t_TKrhV2XqT7YySoHsl8623Bc4/view?usp=sharing
stock boot.img download: https://drive.google.com/file/d/1RzUHNfp0Zns2FrfOHA9mwoDW9BKKeZVH/view?usp=sharing
My model is an HD 1905 but my current build number is 10.0.9 HD65AA... I bought it directly from OnePlus it's a 7T. Is this the boot image I need? I spent hours looking all over in different boot images patched with magisk. I haven't even unlocked my bootloader yet because I'm not sure what my options are... Lol also I noticed you have the patched boot image and a stock boot image I said just in case something goes wrong?
Sent from my OnePlus7T using XDA Labs
groovemetal81 said:
My model is an HD 1905 but my current build number is 10.0.9 HD65AA... I bought it directly from OnePlus it's a 7T. Is this the boot image I need? I spent hours looking all over in different boot images patched with magisk. I haven't even unlocked my bootloader yet because I'm not sure what my options are... Lol also I noticed you have the patched boot image and a stock boot image I said just in case something goes wrong?
Sent from my OnePlus7T using XDA Labs
Click to expand...
Click to collapse
it should work, but first u need an unlocked bootloader...
u can test it as described with the first and second step("fastboot boot" command only boot once, if u get bootloop, just restart and your device will boot as usual) , if it boot and u got root with no problems, then u can finish the process with the third and fourth step
boot image patched for EU version is possible 10.0.9.HD65BA ?
Yeah I just upgraded from a 6t and that was capable of a custom recovery but I'd run into trouble all the time because of the dual partition.. so that patched boot image with magisk all's I need is the APK file 7.51 correct I shouldn't need the magisk 24 .0zip
Sent from my OnePlus7T using XDA Labs
EmiRap said:
boot image patched for EU version is possible 10.0.9.HD65BA ?
Click to expand...
Click to collapse
check my tool here
Thx Thx Thx it worked properly
Thanks. Worked like a charm. The only thing is that I cannot find Advanced option and SafetyNet check is missing in Magisk Manager like I had previously in my OP6T. Also, with this root Google Pay and the likes work, as I also do not see Magisk Hide, but did enalbe in Settings. Thumbs up.
Update: Seems like WiFi is not working now! Any tips?
EazyVG said:
Thanks. Worked like a charm. The only thing is that I cannot find Advanced option and SafetyNet check is missing in Magisk Manager like I had previously in my OP6T. Also, with this root Google Pay and the likes work, as I also do not see Magisk Hide, but did enalbe in Settings. Thumbs up.
Update: Seems like WiFi is not working now! Any tips?
Click to expand...
Click to collapse
Are you sure, that you are on OOS 10.0.9 Global?
To revert back to stock boot image, grab the boot image from a fastboot rom here
be sure to grab the right one!
Definitely it is 10.0.9 HD65AA (GLOBAL) which I got over OTA. But I'll download the one from link again and update locally and then again re-run the steps for root.
Update: Reinstalled 10.0.0.9 and the steps ... all working, no above mentioned issues now. Thanks!
I did the whole steps but the phone application continues to stop and then the data network does not work What is the problem I have updated wirelessly to 1009
AboNaya said:
I did the whole steps but the phone application continues to stop and then the data network does not work What is the problem I have updated wirelessly to 1009
Click to expand...
Click to collapse
Did you already flashed or just booted the image?
HD1905BA Europe Patched boot
10.0.9 HD1905BA (Europe)
Stock boot : drive.google.com /file/d/1yyfzh6HbjrdZG3WDeyTv1d04fBgX3yzl/view?usp=sharing[/url]
Patched boot: drive.google.com /file/d/1ZCX7CWpRX-sZrb_ICOg64q2Abdumynmf/view?usp=sharing
guys!
Just a quick question: does this method pass the safetyNet check?
KyoshiDev said:
Did you already flashed or just booted the image?
Click to expand...
Click to collapse
I think I'll second his problem. I did first couple steps, confirmed root, everything seemed ok. Reboot and performed remaining steps. Now I have major stability problems. System UI eventually FCs then phone restarts. I'm able to get to settings and check version, still shows OOS 10.0.8 HD65AA. The signal bars showed no bars but LTE+ logo. Running another app called Signal Check Pro I confirmed that I had data. It seemed to get more stable the more it booted. The updater still wants to do a full update and wipe, it detects root and says that doing the full upgrade will lose root. I'm probably going to let mine do the full update and then reroot.
How did you patch the image? I get a non working patched boot.img when using the latest version of Magisk Manager.
AboNaya said:
I did the whole steps but the phone application continues to stop and then the data network does not work What is the problem I have updated wirelessly to 1009
Click to expand...
Click to collapse
im having a similar problem, after full ota update (2.6gb) from rooted 10.0.8 im losing mobile network (two SIM icon, greyed out, with a slash sign over it and no baseband infromation) after booting/flashing this boot, even creating mine. Mobile network restores after returning to stock. any clue? Im on 10.0.9.HD65AA
Sacob said:
guys!
Just a quick question: does this method pass the safetyNet check?
Click to expand...
Click to collapse
Yes
Nice Work with that .bat file
It works on Oneplus 7t 10.0.9Hd65BA. EU
Thanks for that super cool tool
To others that need to root a Oneplus 7t 10.0.9Hd65BA. EU i share my magisk boot file whit you all
#drive.google.com/open?id=1vGlNWrw2JAXmtb2ibst2BEQhKCM5ceMl #
Download the file an follow the guide in #1
Hi, I've just received my OP7t Global HD1900.
I installed OTA 10.0.9 and already unlocked the bootloader.
Please, does TWRP recovery work on this phone with 10.0.9? If not, which recovery should I use?
Do I have to flash a patched boot.img to get the phone rooted?
I used the boot image and it rooted my phone..great and many thanks!
Now...which recovery should I flash?
Thanks..
Related
I got update from oero to pie via OTA today,
I tried many patched boot.img and root maunally by patching stock img but its stuck on boot screen.. Any idea??
Download the OTA, extract the images from the payload, flash the stock boot.img in both slots. After your phone boots you can download the latest magisk manager, use it to patch the stock boot.img that you already downloaded and use it to root your device.
Hakkinan said:
Download the OTA, extract the images from the payload, flash the stock boot.img in both slots. After your phone boots you can download the latest magisk manager, use it to patch the stock boot.img that you already downloaded and use it to root your device.
Click to expand...
Click to collapse
What's mean " in both slots " ?
I tried to patch boot.img maunally but my device stuck on boot animations, So I flashed back stock boot.img into fastboot without root agian..
This is an A/B device which means that it has two slots for every partition (A and B). You need to flash the stock boot in the same partirion that it currently being used, flashing It in both is just to be safe in future updates.
Oh hey try this one: https://drive.google.com/file/d/1dBX2dZV_wWgSip8d9lk0lrO_JHfxGdKU/view?usp=sharing
Sorry if this has been asked before, but I didn't find it anywhere on this forum. I am also stuck on a bootloop after installing Pie update. I had Magisk installed and I've uninstalled it - didn't reboot. After, I've applied the Pie update. Didn't reboot. Went back to Magisk app and then did install - install to inactive slot. After that have a "nice" bootloop. How can I get the unpatched boot.img? Thanks in advance.
FRibeiro1400 said:
Sorry if this has been asked before, but I didn't find it anywhere on this forum. I am also stuck on a bootloop after installing Pie update. I had Magisk installed and I've uninstalled it - didn't reboot. After, I've applied the Pie update. Didn't reboot. Went back to Magisk app and then did install - install to inactive slot. After that have a "nice" bootloop. How can I get the unpatched boot.img? Thanks in advance.
Click to expand...
Click to collapse
Download the OTA zip that is available here, extract the boot.img and flash it in both slots. After that you can easily patch the stock image with Magisk Manager and install magisk like you would usually do (direct install).
Hakkinan said:
Download the OTA zip that is available here, extract the boot.img and flash it in both slots. After that you can easily patch the stock image with Magisk Manager and install magisk like you would usually do (direct install).
Click to expand...
Click to collapse
Thank you so much! I am going to try it later, hopefully I can get my phone back fully working. If it's not asking too much, what are the commands I have to type to install it on both slots?
FRibeiro1400 said:
Thank you so much! I am going to try it later, hopefully I can get my phone back fully working. If it's not asking too much, what are the commands I have to type to install it on both slots?
Click to expand...
Click to collapse
"fastboot flash boot_a boot.img" and "fastboot flash boot_b boot.img"
Hakkinan said:
"fastboot flash boot_a boot.img" and "fastboot flash boot_b boot.img"
Click to expand...
Click to collapse
Stuck on boot agian..
I tried flash OTA manual by fastboot & flash patched stuck too!
I think I need reset to root?
*NOTICE: I installed Xposed framwork on oreo, May that's problem?
HaN5aR said:
Stuck on boot agian..
I tried flash OTA manual by fastboot & flash patched stuck too!
I think I need reset to root?
*NOTICE: I installed Xposed framwork on oreo, May that's problem?
Click to expand...
Click to collapse
Wait, did you try to flash the whole OTA?
Hakkinan said:
Wait, did you try to flash the whole OTA?
Click to expand...
Click to collapse
At first I updated from oreo to pie via OTA without any VPN
I failed to root it so, I tried flash it again from HERE but facing the same problem with root it stuck on bootanimations
Hakkinan said:
Download the OTA zip that is available here, extract the boot.img and flash it in both slots. After that you can easily patch the stock image with Magisk Manager and install magisk like you would usually do (direct install).
Click to expand...
Click to collapse
Unfortunatelly, it seems the link for the OTA zip was removed, so, phone will stay bricked thanks to the lack of instructions of how to update to Pie when Magisk is installed. Why do they remove the links?
HaN5aR said:
At first I updated from oreo to pie via OTA without any VPN
I failed to root it so, I tried flash it again from HERE but facing the same problem with root it stuck on bootanimations
Click to expand...
Click to collapse
Ok, now i understand what is happening. It bootloops as soon as you reboot after installing magisk right? If so, then i need to know what you are doing to install magisk.
FRibeiro1400 said:
Unfortunatelly, it seems the link for the OTA zip was removed, so, phone will stay bricked thanks to the lack of instructions of how to update to Pie when Magisk is installed. Why do they remove the links?
Click to expand...
Click to collapse
First the server is down, nobody removed the file, you just need to wait for it to go up again. Second, you can easily revert your phone back to 10.0.1.0 and stay there, your phone isn't bricked and it doesn't have to stay in this current state.
Hakkinan said:
Ok, now i understand what is happening. It bootloops as soon as you reboot after installing magisk right? If so, then i need to know what you are doing to install magisk.
First the server is down, nobody removed the file, you just need to wait for it to go up again. Second, you can easily revert your phone back to 10.0.1.0 and stay there, your phone isn't bricked and it doesn't have to stay in this current state.
Click to expand...
Click to collapse
I never had 10.01.0 installed. I was on Oreo and got the update this morning. I've followed the rule for OTA with Magisk and it was the wrong thing to do. If, at least, there was a warning to NOT follow the instructions, all would be sorted. Maybe I can find a link somewhere with this update, as I don't want to lose my data. On Xiaomi official site, the last rom available is version V9.6.11.0.ODLMIFF. Unless I install this one back.
FRibeiro1400 said:
I never had 10.01.0 installed. I was on Oreo and got the update this morning. I've followed the rule for OTA with Magisk and it was the wrong thing to do. If, at least, there was a warning to NOT follow the instructions, all would be sorted. Maybe I can find a link somewhere with this update, as I don't want to lose my data. On Xiaomi official site, the last rom available is version V9.6.11.0.ODLMIFF. Unless I install this one back.
Click to expand...
Click to collapse
Doesn't matter if you had 10.0.1.0 previously or not. You can download it and install it without losing data.
1: Unlock your bootloader
2: Reboot to fastboot
3: Via fastboot on a PC, flash the attached boot IMG (fastboot flash boot "directory to boot IMG, can drag and drop")
4: Done!
Ill try to keep this img up to date but always verify the version before you flash
Current version: 10.5.4.IN11AA
https://drive.google.com/open?id=18fbWNm1ZLFA1dsJkiQJrcEn-unJA1UDQ
nima0003 said:
1: Unlock your bootloader
2: Reboot to fastboot
3: Via fastboot on a PC, flash the attached boot IMG (fastboot flash boot "directory to boot IMG, can drag and drop")
4: Done!
Ill try to keep this img up to date but always verify the version before you flash
Current version: 10.5.4.IN11AA
https://drive.google.com/open?id=18fbWNm1ZLFA1dsJkiQJrcEn-unJA1UDQ
Click to expand...
Click to collapse
Do you have update to 10.5.5.IN11AA ?
gaww said:
Do you have update to 10.5.5.IN11AA ?
Click to expand...
Click to collapse
If all you're looking for is the patched boot image, you can find it here, https://forum.xda-developers.com/oneplus-8-pro/how-to/magisk-patched-10-5-5-image-t4088333.
spotmark said:
If all you're looking for is the patched boot image, you can find it here, https://forum.xda-developers.com/oneplus-8-pro/how-to/magisk-patched-10-5-5-image-t4088333.
Click to expand...
Click to collapse
Just got the phone and it updated to .5, and late at night, .6 showed up. It installed without all the trouble with TMo 7.
It unrooted, and I used the .5 magisk patched.img above without any problems, but will use .6 when available.
Careful with the fingerprint enrollment, factory wiping with root has been known to break fingerprint. Just a heads up.
Theres a thread about this, there isn't a currently known fix either.
Has happened to EU BA devices but you never know.
dladz said:
Careful with the fingerprint enrollment, factory wiping with root has been known to break fingerprint. Just a heads up.
Theres a thread about this, there isn't a currently known fix either.
Has happened to EU BA devices but you never know.
Click to expand...
Click to collapse
Thanks. I didn't wipe and I don't use fingerprint.
gaww said:
Thanks. I didn't wipe and I don't use fingerprint.
Click to expand...
Click to collapse
Right ok, might want to check it if you ever do. Just in case
Will this work on the Verizon compatible phone?
skateguy1234 said:
Will this work on the Verizon compatible phone?
Click to expand...
Click to collapse
If you're using an unlocked 8 Pro, sure. If you're using an 8, purchased directly from Verizon, no.
skateguy1234 said:
Will this work on the Verizon compatible phone?
Click to expand...
Click to collapse
Check your pms if you want to tinker with the Verizon model with
I'm using a US 8 Pro running 10.5.10.IN11AA. Can I use this 10.5.4.IN11AA boot image, or do I need to wait for an update? Is there a newer way to install magisk?
Ecna said:
I'm using a US 8 Pro running 10.5.10.IN11AA. Can I use this 10.5.4.IN11AA boot image, or do I need to wait for an update? Is there a newer way to install magisk?
Click to expand...
Click to collapse
No - don't use old one. If you search, you should find 10.5.10 boot image.
Thanks, I couldn't find a new one so I downgraded to 5.9.
Ecna said:
Thanks, I couldn't find a new one so I downgraded to 5.9.
Click to expand...
Click to collapse
Now you can upgrade back to 5.10 and reinstall magisk before booting up the update. Works real easy.
^ @gaww
I've been able to unlock the bootloader on my Oneplus 8 Pro and am trying to locate a magisk patch compatible with 10.5.1.in11aa, yet can't locate this version. However, there's an OTA update available for my phone at takes it to 10.5.10. If I first perform that OTA update, where can I then find a compatible version of magisk?
TIA!
Deckardmac said:
^ @gaww
I've been able to unlock the bootloader on my Oneplus 8 Pro and am trying to locate a magisk patch compatible with 10.5.1.in11aa, yet can't locate this version. However, there's an OTA update available for my phone at takes it to 10.5.10. If I first perform that OTA update, where can I then find a compatible version of magisk?
TIA!
Click to expand...
Click to collapse
Don't make things complicated, update to 10.5.10, boot twrp, install magisk from the zip
^ Pardon my noobness, but does the Magisk version have to match the OxygenOS version, or can I simply use the latest Magisk version? Lots of chatter about getting the Magisk that matches.
Deckardmac said:
^ Pardon my noobness, but does the Magisk version have to match the OxygenOS version, or can I simply use the latest Magisk version? Lots of chatter about getting the Magisk that matches.
Click to expand...
Click to collapse
Use 20.4
^ Thanks guys. It worked flawlessly.
how to fix cts profile false on 10.5.10
So I updated my phone to Oxygen OS 10.0.12 which was released today and like an idiot I forgot to repatch magisk before rebooting so I lost root. Since this is a new version I knew there wouldn't be a prepatched boot.img yet so I went to the oneplus support website, downloaded the update (and not checking the version number), extracted boot.img with payload_dumper.py, patched it, and flashed it to my phone. Unfortunately, the latest version up on their website is 10.0.11.HD65AA while my phone is on 10.0.12.HD65AA, and the mismatched boot.img broke wifi and bluetooth, so I cannot enable or use them, and cellular has the "no sim card" symbol but still seems to be working. What would the quickest way to fix this? I assume flashing a correct version boot.img would fix it, but I have no idea where to get the newest version.
(yes, yes I know I made many stupid mistakes to get to this point but it's too late now)
nytpu said:
So I updated my phone to Oxygen OS 10.0.12 which was released today and like an idiot I forgot to repatch magisk before rebooting so I lost root. Since this is a new version I knew there wouldn't be a prepatched boot.img yet so I went to the oneplus support website, downloaded the update (and not checking the version number), extracted boot.img with payload_dumper.py, patched it, and flashed it to my phone. Unfortunately, the latest version up on their website is 10.0.11.HD65AA while my phone is on 10.0.12.HD65AA, and the mismatched boot.img broke wifi and bluetooth, so I cannot enable or use them, and cellular has the "no sim card" symbol but still seems to be working. What would the quickest way to fix this? I assume flashing a correct version boot.img would fix it, but I have no idea where to get the newest version.
(yes, yes I know I made many stupid mistakes to get to this point but it's too late now)
Click to expand...
Click to collapse
flash the full system update zip again and this time don't flash the boot image, instead just boot the patched boot image and modify original boot image with magisk app itself.
Aswin08 said:
flash the full system update zip again and this time don't flash the boot image, instead just boot the patched boot image and modify original boot image with magisk app itself.
Click to expand...
Click to collapse
But the problem is that there's no way that I can find to download the newest update, downgrading just results in a bootloop. If you know where I could find the worldwide version of the 10.0.12 ota (either full or incremental version) then that would solve the problem.
nytpu said:
But the problem is that there's no way that I can find to download the newest update, downgrading just results in a bootloop. If you know where I could find the worldwide version of the 10.0.12 ota (either full or incremental version) then that would solve the problem.
Click to expand...
Click to collapse
That should be it:
OnePlus 7T OOS 10.0.12 Global: https://otafsg1.h2os.com/patch/amaz...gen_14.O.18_OTA_018_all_2007240040_cce2fc.zip
Hi,
I use a RMX2063 since last month, rooted with the TWRP method I found in this forum since day 0. I tried to install the lastest OTA update, that was released last week (RMX2063 _11_A.22), but I have issues to keep magisk working.
Either I do a clean install or a dirty flash, I enter into a bootloop every time I flash lastest magisk version (20.4). Otherwise, the phone works OK if I reflash the OTA and use it without rooting.
Any solutions to that, so I don´t have to downgrade the phone?
Jpigas said:
Hi,
I use a RMX2063 since last month, rooted with the TWRP method I found in this forum since day 0. I tried to install the lastest OTA update, that was released last week (RMX2063 _11_A.22), but I have issues to keep magisk working.
Either I do a clean install or a dirty flash, I enter into a bootloop every time I flash lastest magisk version (20.4). Otherwise, the phone works OK if I reflash the OTA and use it without rooting.
Any solutions to that, so I don´t have to downgrade the phone?
Click to expand...
Click to collapse
It doesn't work. In order for me to get root afterwards is to flash the latest for rmx2061, extract the boot.img, modify it with magisk and flash the modified boot.img afterwards
mepadiernos said:
It doesn't work. In order for me to get root afterwards is to flash the latest for rmx2061, extract the boot.img, modify it with magisk and flash the modified boot.img afterwards
Click to expand...
Click to collapse
First of all, thx for the quick response.
I think I already tried that, you mean flashing the modified boot.img via TWRP? (install -> install image -> "boot")?
After that I had another bootloop ("system image is destroyed" realme message)
Jpigas said:
First of all, thx for the quick response.
I think I already tried that, you mean flashing the modified boot.img via TWRP? (install -> install image -> "boot")?
After that I had another bootloop ("system image is destroyed" realme message)
Click to expand...
Click to collapse
I was actually referring to flashing via fastboot.
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
mepadiernos said:
I was actually referring to flashing via fastboot.
Click to expand...
Click to collapse
The phone enters bootloop anyway (system destroyed), but thank you anyway @mepadiernos. Any other idea?
Jpigas said:
The phone enters bootloop anyway (system destroyed), but thank you anyway @mepadiernos. Any other idea?
Click to expand...
Click to collapse
Hmmm, I do remember that the twrp provided here for the Realme 6 Pro breaks encryption after I upgraded to .27 so I had to flash the .20 for rmx2061 via stock recovery. I had to put the ozip in the microsd. I believe that will factory reset the phone. When it does I went through the process of setting up my phone sans root. I installed magisk manager and proceeded to patch the extracted boot image from the ozip, the update for the rmx2061, and flashing via fastboot. So, I have root but no twrp.
mepadiernos said:
Hmmm, I do remember that the twrp provided here for the Realme 6 Pro breaks encryption after I upgraded to .27 so I had to flash the .20 for rmx2061 via stock recovery. I had to put the ozip in the microsd. I believe that will factory reset the phone. When it does I went through the process of setting up my phone sans root. I installed magisk manager and proceeded to patch the extracted boot image from the ozip, the update for the rmx2061, and flashing via fastboot. So, I have root but no twrp.
Click to expand...
Click to collapse
It doesn´t worked for me, buy, anyway, I´m planning to downgrade due to the very high power consumption. Nowadays the phone struggles to reach 3-4h screen on, versus the 6h I managed to reach on previous version. What do you guys think about it?
So I used init_boot like the rest of us to achieve root. I then used ex kernel manager to backup the boot.img for CPH2451. Anyone brave enough to flash/boot it? Has anyone used magisk to install magisk using direct install? I think it would be very handy to have a stock boot and a magisk patched boot.img. For example it's how I setup fingerprint unlock with the Chase bank app. I would think that I could try fastboot boot stock-boot-image and it would boot fine but I tried that with init_boot and it bricked my phone which took awhile to fix. I would have thought that doing fastboot boot init_boot.img would have not booted with what I know now but it actually bricked my phone. Not sure how considering nothing was supposed to be flashed because I only used the boot command and not flash.
On op11 you need the init_boot.img not the boot.img for rooting
ChrisFeiveel84 said:
On op11 you need the init_boot.img not the boot.img for rooting
Click to expand...
Click to collapse
I see that now. I was just curious since I hadn't seen a stock boot for A.07 if I was safe to flash the one I made. It worked fine. Great to know I have that now.
So is patching the init_boot an android 13 thing? As in no more patching boot.img?
PROPER CPH2451 Root and Update instructions
This is for the CPH2451 Rom, but should also work for other roms. I have returned my device so I will not be updating this with future updates. I have validated these instructions work for CPH2451 NA version so it's your choice to follow it or...
forum.xda-developers.com
Chase fingerprint works while rooted.
g96818 said:
PROPER CPH2451 Root and Update instructions
This is for the CPH2451 Rom, but should also work for other roms. I have returned my device so I will not be updating this with future updates. I have validated these instructions work for CPH2451 NA version so it's your choice to follow it or...
forum.xda-developers.com
Chase fingerprint works while rooted.
Click to expand...
Click to collapse
It only works for me once I unroot then set fingerprint unlock. After that I root again and it sticks.
shootind5nukes said:
It only works for me once I unroot then set fingerprint unlock. After that I root again and it sticks.
Click to expand...
Click to collapse
After you have root Have you flashed this ?
ChrisFeiveel84 said:
After you have root Have you flashed this ?
Click to expand...
Click to collapse
Yes, did that re installed chase and still didn't work. So I just did what I used to do with the op8pro and unrooted, set chase finger print up, then rooted. Works like a charm
shootind5nukes said:
Yes, did that re installed chase and still didn't work. So I just did what I used to do with the op8pro and unrooted, set chase finger print up, then rooted. Works like a charm
Click to expand...
Click to collapse
Make sure you put chase on the deny list and clear the app data