Hello everyone,
I have Philips 55PUS7909/12 and it is stucked on Philips Logo and after a few seconds, it restarts again with the Philips Logo. The TV is stucked in bootloop. I have already tried the Joypad Down key to enter into recovery mode but unfortunately it cannot enter into Recovery Mode. Tried with latest firmware in "upgrades" folder and also in root folder but no luck. Then I tried with USB A-A cable but "adb devices" returns nothing. I'm out of options. Can anybody help me to tackle this problem?
Thanks in advance
Hi
I have the same tv. Same things happened to it. Apearently that is the core level of problems. Which Tv brings itself to the Protection mode. You only see the philips logo. And tv shuts and opens up continuesly I guess. At this level tv doesnt allow you to use the joystick for Bootlader, dont worry about it. Also it may not allow you to see it as a device in adb. will tell you there is no device million times. I hope you find solution soon.
Related
Hi,
My stock fire tv is stuck in boot process. When I turn it on loads the b/w amazon logo and, about 30 seconds after, the colorful amazon fire tv logo comes up. And that's it, nothing else ever happens. No reboot, noloop, nothing else.
I have tried to factory reset it by pressing alt+i+print-screen hundred of times while booting with no success. I have tried with 4 different keyboard (including a logitech k400).
I have tried to connect a USB-A to USB-A cable from the fire tv and the PC and installed adb drivers (all devices are recognized by windows and display and device manager) but I can't detect the device with adb devices at any stage of the boot process at all.
Does anyone have any other possible way to un-brick it? O any other suggestion to revive it?
btw, It "bricked" itself. One day I turned on tv and I saw empty menus and nothing happened if I tried to navigate on it... So decided to reboot it and... there you go, the way it is now.
Thanks in advance.
Anybody can help please? I've got a precious brick os plastic and circuits on top my desk right now....
Sorry if this is posted in the wrong section, I am never quite sure where these sort of queries should go
To cut a long story short I unlocked and rooted 1 of my FTV 4K sticks, I was struggling with an issue on 1 and ended up installing a Magisk update. I know there are warning all over the forum about this please put it down to a lack of experience.
On reboot it just comes up with the black screen and the white amazon logo, it stays on this for about 2 minutes then restarts to the same black screen. i.e. its caught in a boot loop. It never gets to the white amazon screen.
I bought myself an OTG cable thinking this would get me to twrp so I could go into recovery and wipe it and start again or something, but even with the OTG cable plugged in it still does exactly the same thing. I have tried the same OTG cable and entertainment keyboard setup on another FTV 4K stick and it gives me the 5 second boot menu to get into recovery.
I am guessing I have killed it beyond repair? Is there anything else I can try to do?
Thanks
you need a usb keyboard and then you need to press a combination shown on youtube: , Don't be afraid it is very hard to do it but i can confirm it works 100% for sure!! The timing for holding the key press is all that matters to be successfully...
Try different timings if it's not working on the first run but you need then to hold the buttons for very long time until your fingers feel dead....
..im not sure if adb is working in "safe mode" you need to test that. If yes - you could use "adb reboot recovery".
2. you need to reflash Magisk in core mode.
Aq
dougie175 said:
Sorry if this is posted in the wrong section, I am never quite sure where these sort of queries should go
To cut a long story short I unlocked and rooted 1 of my FTV 4K sticks, I was struggling with an issue on 1 and ended up installing a Magisk update. I know there are warning all over the forum about this please put it down to a lack of experience.
On reboot it just comes up with the black screen and the white amazon logo, it stays on this for about 2 minutes then restarts to the same black screen. i.e. its caught in a boot loop. It never gets to the white amazon screen.
I bought myself an OTG cable thinking this would get me to twrp so I could go into recovery and wipe it and start again or something, but even with the OTG cable plugged in it still does exactly the same thing. I have tried the same OTG cable and entertainment keyboard setup on another FTV 4K stick and it gives me the 5 second boot menu to get into recovery.
I am guessing I have killed it beyond repair? Is there anything else I can try to do?
Thanks
Click to expand...
Click to collapse
You haven't killed your stick, install fastboot drivers and app.
Connect your stick to your pc via usb.
Enter
Code:
fastboot devices
when you see black screen with amazon logo, it should be inside fastboot mode
(If somehow you flashed update to boot.img as written in the guide)
If you see the stick in fastboot mode,
Pull twrp from kamakiri.zip
Place it in fastboot folder
Enter
Code:
fastboot flash boot boot.img
(boot.img or whatever the name of your twrp image)
Code:
fastboot reboot recovery
It should work, if not you can use shorting method again.
Thanks very much both, I will have a play around this evening when I get home from work and the kids are in bed, hopefully with the info above I can get back to recovery again.
Thanks for the help gents, in the end I had to do the shorting method to get the stick to do anything. It took about 6 attempts before kamakiri script even registered it as anything being plugged in, it just kept saying wait for boot.
Once it realised the stick was present and shorted I was away though, I have ended up having to factory reset and wipe everything so will need to start again with it but I am just pleased I don’t need to shell out again for a new stick.
Thanks again for your help
Hi,
Since yesterday my Philips TV is acting strange, it won't turn off and starts directly to "Factory Mode TF",
Been in contact with Philips about this, and they only could provide a Firmware PKG update. When applying the firmware it installs just fine only to find out that after reboot it's back to Factory mode.
Since ADB apparently does not run when booted in factory mode and no access to any of the menu's using the remote control I'm at a loss, does anyone have some sort of solution to let the TV boot normally?
JEFF__ said:
Hi,
Since yesterday my Philips TV is acting strange, it won't turn off and starts directly to "Factory Mode TF",
Been in contact with Philips about this, and they only could provide a Firmware PKG update. When applying the firmware it installs just fine only to find out that after reboot it's back to Factory mode.
Since ADB apparently does not run when booted in factory mode and no access to any of the menu's using the remote control I'm at a loss, does anyone have some sort of solution to let the TV boot normally?
Click to expand...
Click to collapse
Did you read this?
[GUIDE] Continuous restart / bootloop fix for Philips Android TV with Wipe Data Tool
Use this tool in connection to: *Get rid of cyclic spontaneous reboots of your Philips Android TV... *Recover your Philips Android TV in case you get continuous boot-loops, where Philips and/or Android logo does not even show up... *Stop your...
forum.xda-developers.com
Already tried the one for QM16.3E chassis, but for some reason it won't get accepted as the TV boots straight back into Factory mode which is showing top left and TF bottom right.
Also considered booting into recovery mode by holding down the joystick and replugging power but this is also not working.
The TV itself works, but only with a very basic interface.
Hi,
try: 0, 0, 0, Info
to exit Factory Mode
[email protected]
@Toengel This unfortunately doesn't get accepted as a valid input. It only accepts 0-9 with a basic interface.
See the photo of the current state.
Hi,
can you please write me an email? You can find the address in the imprint of my blog.
[email protected]
Himy firestick 4k stuck into bootloop and keeps restarting after Amazon logo. Pls help me & tell me how I can enter in Twrp Recovery on my Firestick 4k. I had rooted Firestick 6.2.7.7, I updated to 6.2.8.0. after that it didn't work and stuck and keep restarting after few seconds of startup when Amazon Logo displays on screen.
Thanks
smumar143 said:
Himy firestick 4k stuck into bootloop and keeps restarting after Amazon logo. Pls help me & tell me how I can enter in Twrp Recovery on my Firestick 4k. I had rooted Firestick 6.2.7.7, I updated to 6.2.8.0. after that it didn't work and stuck and keep restarting after few seconds of startup when Amazon Logo displays on screen.
Thanks
Click to expand...
Click to collapse
Simply plug in an otg cable with an qtg mouse and hit cancel to enter twrp. This will only work if the exploit is still within the device.
A little trick is to install Powermenu little vic apk from apk pure, give him root permissions and you can use this to boot to recovery from fireos/Launcher homescreen.
Regards
Hello,
I have a tv TCL 55DP660, motherboard is MT58CU (40-mt58cu-mab4hg).
I am stuck at loading screen and nothing works for me, after I entered developer options and turned on Debug mouse setting, my tv restarted and was in forever looping state.
What I tried
1) turning the power off
2) inserting usb stick with file in root (V8-T658T01-LF1R579.pkg) tried with multiple version, all produced same result, as well with .zip extension
3) Holding down power button on tv
4) Plugging into electricity
5) screen shows TCL logo static
6) after 10 seconds, it show "TCL" logo animated
7) and then it showns loading and gets stuck there forever.
Also tried opening my tv, and taking a loot at motherboard, but could find a reset jumper, or reset pin to short circuit.
The only thing I found was MCU_RST name on a back of the board, but it was only a single filled hole and nothing around it. So was wondering to which connection do I short circuit it so it would do a factory reset for me? or is there another way?
Thank you!
Try V574 pkg file....unzip to "Update.pkg"
http://celesw.tcl.com/CSEU%20TV/Software/MT58/V8-T658T01-LF1V574_PKG_USB_GMC.zip
also read here:
Downgrade File for TCL C6 (Current Version: V8-T658T01-LF1V534)
Hey guys, I am new to the Android TV scene so bear with me. Recently bought TCL C6 TV. It updated yesterday to Android Oreo but the Color accuracy especially in HDR has fallen considerably, constant dimming of backlight for no reason and not to...
forum.xda-developers.com
Just tried it.
Formated usb with fat32, and put inside root "Update.pkg" file.
Unplugged tv -> inserted usb (tried twice with both slots) ->started holding power button -> plugged tv -> tv started loading showing static TCL logo -> after 10 seconds it booted as if normal and was stuck on loading screen forever.
Maybe change USB ?
It started working for me, All I had to do was change flash drive
Optick002 said:
It started working for me, All I had to do was change flash drive
Click to expand...
Click to collapse
hi, 1 question...
have you the instant on issue?
Hi,
i tried this solution, but right now the only thing i have is the stand by light on. it doesnt do nothing.
i already tried light on the the with the remote control and nothing.
somebody help?
there is any other solution to flash de mainboard?
thanks