Hello everyone!
I have repacked @phhusson 's Quack Phh-Treble GSI to a flashable TAR file that we can flash on the S20 devices.
For more info about Quack Phh-Treble GSI check this thread here - https://forum.xda-developers.com/pr...velopment/aosp-10-0-quack-phh-treble-t3992559
What doesn't work?
Auto brightness
Fingerprint enrolment works 50% on first boot and randomly works when screen is off
Reports about MTP not working - could be a driver issue
NFC
For a full list of issues, check the official github - https://github.com/phhusson/treble_experimentations/issues
What works?
Everything else!
Found something else that doesn't work? Let me know and I'll update the thread.
What do these repacks include
The official release of Quack Phh-Treble GSI with Gapps (system-quack-arm64-ab-gapps.img)
Cross Device Lineage Recovery Flashable - Phh SYSTEM image only!
Downloads
Download Quack_Phh-Treble_GSI_v217zip from:
Mega - https://mega.nz/file/dowXRSYT#LaJSGNelVxPcerNkyN2QQVIYKos4Eea_dH10PId2JsM
AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261820046
How to install
If you are not rooted - follow Jesec's guide on how to root your device. Make sure you boot into setup at least once! - https://forum.xda-developers.com/galaxy-s20/how-to/howto-root-s20-series-upgrade-firmware-t4079353
If you do not have Lineage Recovery - again, follow Jesec's guide on how to install Lineage Recovery - https://forum.xda-developers.com/ga...recovery-lineage-recovery-s20-series-t4086223
Enter Recovery Mode and factory reset your device
Copy Quack Phh-Treble GSI v216.zip onto your external SD
In Lineage Recovery, choose Apply update
Choose Apply from disk
Choose Quack_Phh-Treble_GSI_v216.zip
Once installation is complete, reboot to system
Previous Versions
v216
Mega - https://mega.nz/file/g5RUHCID#1LqTrVnRotQwb5vLQQ0TGDN4vtgx4N4aHJza3yZkvU0
AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261800816
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
@phhusson for the Quack Phh-Treble
@jesec for root guids, Lineage Recovery, binary-update and help with creating the flashable zip
Have fun!!
Here we go! Fantastic work and gladly tested for a legend
Finally seeing someone making a custom ROM. Nice work! I will grateful if you could repack the Pixel Experience to .tar file.
Dennis weigh said:
Finally seeing someone making a custom ROM. Nice work! I will grateful if you could repack the Pixel Experience to .tar file.
Click to expand...
Click to collapse
You could try using DSU https://developer.android.com/topic/dsu
phhusson said:
You could try using DSU https://developer.android.com/topic/dsu
Click to expand...
Click to collapse
cheers mate nice
Does it work on the S20 Ultra?
VolRepth said:
Does it work on the S20 Ultra?
Click to expand...
Click to collapse
Works on all devices
Installation went smoothly. It works fine, but the screen only displays 48 hertz. also did not find the change of control points
You should be able to flash whatever other GSI Image on top of this right? Sorry, GSI noob here.
So i got it booted. 120hz doesnt work either. displayhz.com says i'm only getting 48hz....
I would highly vouch for this ROM if the refresh rate was higher. Unfortunately, their is no way to enable any kind of higher refresh rate. For that reason, I'm going back to stock until something else comes along. Nice work though OP
Try:
adb shell settings put system peak_refresh_rate 96.0
adb shell settings put system min_refresh_rate 96.0
NisseGurra said:
Try:
adb shell settings put system peak_refresh_rate 96.0
adb shell settings put system min_refresh_rate 96.0
Click to expand...
Click to collapse
I appreciate the response mate. Nope, doesnt work
speedyjay said:
I would highly vouch for this ROM if the refresh rate was higher. Unfortunately, their is no way to enable any kind of higher refresh rate. For that reason, I'm going back to stock until something else comes along. Nice work though OP
Click to expand...
Click to collapse
What does treble setting give?
phhusson said:
What does treble setting give?
Click to expand...
Click to collapse
Sorry bud? I'm new to GSI's can you explain?
Sent from my [device_name] using XDA-Developers Legacy app
speedyjay said:
Sorry bud? I'm new to GSI's can you explain?
Click to expand...
Click to collapse
In Settings => Treble Settings => Misc you can select FPS
phhusson said:
In Settings => Treble Settings => Misc you can select FPS
Click to expand...
Click to collapse
I tried them all and none of the options worked buddy.
Sent from my [device_name] using XDA-Developers Legacy app
Besides the refresh snag that no doubt will get ironed out, what's the rom like..
Obviously the camera will be on everyone's minds
arknailed7754 said:
Besides the refresh snag that no doubt will get ironed out, what's the rom like..
Obviously the camera will be on everyone's minds
Click to expand...
Click to collapse
ROM works incredibly well. Camera's - the ultrawide works as well as the regular camera. 100X gimmicky, usless, cant do anything with camera doesnt work lol I'm sure the refresh rate bug will be ironed out. Also, video recording doesnt work. Well, it does but when you play it back, it sounds like it was recorded by the chipmunks on crack! lol
speedyjay said:
ROM works incredibly well. Camera's - the ultrawide works as well as the regular camera. 100X gimmicky, usless, cant do anything with camera doesnt work lol I'm sure the refresh rate bug will be ironed out. Also, video recording doesnt work. Well, it does but when you play it back, it sounds like it was recorded by the chipmunks on crack! lol
Click to expand...
Click to collapse
how about the quality tgough similar to stock?
Related
For those who want to try Android P here are the how-to.
I just sharing the experience, I´m not involved in the project.
The sources will free-up for the ends of the month so maybe some dev could put his hands on it.
For now it´s unlikely unstable and with some bugs but usable for a basics and sharing some issues could be solved.
A good introducing for a better comprehension :
https://www.xda-developers.com/android-p-beta-port-snapdragon-project-treble-devices/
This is the general thread:
https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
These are the steps for our device:
https://forum.xda-developers.com/showpost.php?p=77101817&postcount=308
Maybe someone can wipe too system adding to the steps of wiping from recovery and only will stay vendor partition needed to boot.
Other links:
Treble rom base: https://forum.xda-developers.com/redmi-note-5/development/rom-cardinalaosp-t3774232
Recovery used for this: https://forum.xda-developers.com/re.../official-orangefox-recovery-project-t3807479
I tried before with the latest recovery provided for miui 10 (vince_treble_twrp-jay-port-v3), I formatted data to can boot as indicated for some users in the thread but never boot and never recovered the ability to see files and flash nothing more directly (but adb sideload) from this twrp version, any of the three no-verity/lazyflasher/antibootloop worked for this so I started again with Orange Fox recovery. (although any treble recovery could work following right steps indicated)
No need to flash callfix.zip.
Some screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
would appreciate if you provide the list of bugs and what about major things like volte and camera2api?
ridersam said:
would appreciate if you provide the list of bugs and what about major things like volte and camera2api?
Click to expand...
Click to collapse
I didn´t try many, for me it´s in beta level yet but as far as I know VoLTE is a global bug in all devices yet and camera2api it´s not working for me but maybe with other mods can work so in some devices it works, but we can expect that as many users and devs take part of this then we get more advance. I hope that users can share the experiences and so help others.
I use android p. And for me this gsi is much better than los 15.1 ... except for fingerprint. 2api camera works great! only first you need to flash .zip 2api, only after that install the camera application! The battery holds well, and is pleasant and smooth to use.)) I love the new from Google)
I am currently on DP 3 so should i flash clean or dirty flash over DP 3
I did the exact steps and still it goes directly to fastboot and does not boot the os
ibbi.ir7 said:
I am currently on DP 3 so should i flash clean or dirty flash over DP 3
Click to expand...
Click to collapse
DP3 is the GSI, what do you want to flash over DP3?
seekahaa said:
I did the exact steps and still it goes directly to fastboot and does not boot the os
Click to expand...
Click to collapse
Did you made wipes before to flash Cardinal treble?
SubwayChamp said:
Did you made wipes before to flash Cardinal treble?
Click to expand...
Click to collapse
Yes I wiped everything as I supposed to, still nothing.
I will try the same steps again now.
SubwayChamp said:
Did you made wipes before to flash Cardinal treble?
Click to expand...
Click to collapse
I started from start to flash DP 4 and it is more fluid than DP 3.
Anyone tried with a treble enabled custom kernel?
why cardinal treble rom ? cant we use other treble based roms ?
---account closed
---account closed
langster- said:
I got DP4 installed on the Redmi 5 Plus 3GB version. It does work and you can use it but there are some major problems and the rom is totally unusable.
- the launcher crashes constantly (pixel launcher isn't responding) so you lose your navigation and phone is unusable
- even when the launcher isn't crashed everything is so slow (20 seconds to open any app) and the pill switcher is 10 seconds to open
- no double tap to wake phone is a joke
- no fingerprint sensor at all
- no volte
- no camera
- google treble is full of bloatware that you are forced to download for the phone to work
- dark theme doesn't work on settings
All in all a total fail by google just like their new gmail interface, but well done to the developer who tried to port it.
Guys don't waste your time with this just install a normal custom rom.
If you must try it take a nandroid backup first and after restoring your nandroid backup there is a stupid bug in TWRP you have to use file manager to delete /data/system/locksettings.db to get back into your phone!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-oksFOzjR1o this guy was able to run it flawlessly. You must have done something wrong i guess.
---account closed
langster- said:
see how he doesn't open playstore, that is because the playstore patch is not installed installed yet.
once he installs the playstore patch it will turn into what i described.
i was very excited because of videos like that also, but no, i will reinstall just in case I did something wrong, but i highly doubt it.
Click to expand...
Click to collapse
maybe you are right but atleast i get a hope that our device will soon be running Android P.
another thing do u know why every developer has stopped working on Treble ROMS?
---account closed
I got it to work, and it is cery smooth for a port. My main issue is the wifi keep disconnecting and random freezes on the os. Other than that everything works as smooth as it should even the fingerprint.
---account closed
I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal
Welcome to GSI For Galaxy A50 ONLY FOR A505F/A505FN/A505GN
Some information you should know..
Full TREBLE Documentation here : https://source.android.com/devices/architecture
Generic System Image (GSI) Documentation here : https://source.android.com/setup/build/gsi
If any bugs you face, Report them to the appropriate Threads of the GSI you installed or github issues section, as those are not mine to fix i only provide Guide that allows GSIs to run on.
- VENDOR FEATURES:
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Camera
Bluetooth
GPS
All Sensors
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A/B_arm64 Variant)
unpack it if it wasn't in .IMG format
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
- STEPS FOR INSTALLING GAPPS
Download the appropriate OpenGapps.org
Go to TWRP , Install
Pick your OpenGapps.zip
Reboot to System
- FOR INSTALLING FIXES:
Camera Fix (Flash only on NON Working GSIs)
- KNOWN BUGS:
Fingerprint
Bluetooth calls are broken
May be more, Let me know
Downloads. F.A.Qs below
XDA:DevDB Information
Guide on How to flash GSI, ROM for the Samsung Galaxy A50
Contributors
prashantp01
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2019-05-26
Last Updated 2019-05-26
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Generic System Image (GSI) : Github
Treble folder : Gdrive
---------------------------------------------------------------
Bugs :
1- some users might face SDCard issues
If you did , back up its data and format it in GSI.
2- If you face "Error 70: Insufficient storage space available in the system partition" while flashing Gapps
If you get do this : Wipe > Advanced Wipe > select system > Repair or Change File System > Resize File System
Go back and flash Gapps
F.A.Q
Q : Do i need to format internal storage ?
A : No
Q : What Camera is recommended ?
A : Footej and open camera works the best
Q : Can i flash any GSIs ?
A : No, only AB_ARM64 Are supported
Q : Can i flash any sGSIs ?
A : No unless they match the Arch above
But our device is A only right? why flash AB
Lynjun002 said:
But our device is A only right? why flash AB
Click to expand...
Click to collapse
your device is System-as-root, which is somewhat similar to A/B, so AB GSI will boot on your device.
Lynjun002 said:
But our device is A only right? why flash AB
Click to expand...
Click to collapse
for more information : https://source.android.com/devices/bootloader/system-as-root
Lynjun002 said:
But our device is A only right? why flash AB
Click to expand...
Click to collapse
yes its A, flash A only
kamalkiraa said:
yes its A, flash A only
Click to expand...
Click to collapse
You can even flash A only gsi, but it will not boot, so prefer A/B
does anyone try any GSI?
kamalkiraa said:
yes its A, flash A only
Click to expand...
Click to collapse
Hi thanks for response
kamalkiraa said:
does anyone try any GSI?
Click to expand...
Click to collapse
It's great for the novelty but without fingerprint recognition and bluetooth calls, not to mention other bugs that will crop up, this isn't going to be a daily driver. Custom ROMs are still the best bet but without any developers on board, it doesn't seem like much development will be happening for this device.
t3chg33k said:
It's great for the novelty but without fingerprint recognition and bluetooth calls, not to mention other bugs that will crop up, this isn't going to be a daily driver. Custom ROMs are still the best bet but without any developers on board, it doesn't seem like much development will be happening for this device.
Click to expand...
Click to collapse
Ultra Wide Angle work on GSIs ?
Arnaud Créative Studios said:
Ultra Wide Angle work on GSIs ?
Click to expand...
Click to collapse
No as you wont have the stock samsung camera and gcam or any other 3rd party camera does not support the wide angle lens on our devices *yet*.
Doubt
Do the in display fingerprint scanner work? Or does even does face unlock work? I am very curious
bobandar said:
No as you wont have the stock samsung camera and gcam or any other 3rd party camera does not support the wide angle lens on our devices *yet*.
Click to expand...
Click to collapse
Ok I think they'll add support in future,a lot of phone have Wide Angle cam
---------- Post added at 07:49 PM ---------- Previous post was at 07:48 PM ----------
Pratham Gajjar said:
Do the in display fingerprint scanner work? Or does even does face unlock work? I am very curious
Click to expand...
Click to collapse
Face Unlock work on all devices for Fingerprint I can't answer you I haven't buy A50 yet I'll do next month for my birthday
Just inquisitive as I have rooted my device with stock recovery only. From what I have read, TWRP doesn't work with the latest kernels, so how are all the patches going to be flashed assuming the system image is flashed using fastboot?
t3chg33k said:
Just inquisitive as I have rooted my device with stock recovery only. From what I have read, TWRP doesn't work with the latest kernels, so how are all the patches going to be flashed assuming the system image is flashed using fastboot?
Click to expand...
Click to collapse
I think this is a good beginning please keep the good work
Any update please :angel: ?
Maybe someone has tried which roms is the best for our lovely A50 ?
Pratham Gajjar said:
Do the in display fingerprint scanner work? Or does even does face unlock work? I am very curious
Click to expand...
Click to collapse
as i mentioned in bug list FP will not work
xsleena said:
Any update please :angel: ?
Maybe someone has tried which roms is the best for our lovely A50 ?
Click to expand...
Click to collapse
Do u have twrp installed ?
prashantp01 said:
Do u have twrp installed ?
Click to expand...
Click to collapse
not for now
StatiXOS 4.0 for the Redmi Note 9S/Pro/Pro Max/Poco M2 Pro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog:
- Switch to QTI Bluetooth Stack
> Fixes BT Audio
- Switch to OSS hals
> Fixes WFD
- Fix ok google
- Revert buggy experimental UI changes
- Add StatiXOS bolt in about page
- Convert global actions to translucent overlay with blur
- Kernel Upstream
- Source Upstream
- Enable press power button to unlock (instead of touching the fingerprint sensor)
- Update telephony to LA.UM.9.1.r1-07000-SMXXX0.0
- Enable telephony injection
- Update ims
Download
GAPPS ARE INCLUDED
Bugs:
WFD
You tell me
Karmel sources
Have fun!
Nice job sar
Would you please share some SCS
Amazing rom
Tnx for your hard working ?
Great work tyvm for first a11 ROM for our phone ?
amirizad_7436 said:
Nice job sar
Would you please share some SCS
Click to expand...
Click to collapse
Yes, just a sec I'll upload them ASAP
Edit: I couldn't upload them. I'd be honest and say why but I know it would get deleted for "violating the rules". If someone could upload screenshots for me I'd appreciate it.
THANK YOU DEV
Always a pioneer
First android 10 on Vince, first Android 11 on Curtana
KUDOS
is this a miatoll ROM? I own a Joyeuse
PaulDnoOb said:
is this a miatoll ROM? I own a Joyeuse
Click to expand...
Click to collapse
Joyeuse is the only miatoll device that doesn't work as expected for this rom.
Good job Dev, thanks
btw; proximity fix and we'll have a daily driver
Hey guys I still can't upload screenshots, if anyone would be able to do it for me I'd appreciate it
_4PERTURE_ said:
Hey guys I still can't upload screenshots, if anyone would be able to do it for me I'd appreciate it
Click to expand...
Click to collapse
Hi @_4PERTURE_ I made a screen recording of StatixOS and uploaded it on YouTube. Hope this helps.
For some reason my F2FS /data partition cannot be properly detected by Lineage Recovery and I was initially unable to install. I reverted to TWRP, changed /data to EXT4, returned to Lineage Recovery and the install worked. But it might not have been the reason for working because according to Device Info HW, /data is still F2FS.
I cannot get into the Styles and Wallpaper menu.
Thank you for your hard work!
oh looks good. about to a daily driver.
anyway, is it not possible to flash the rom through twrp?
bawitdol said:
oh looks good. about to a daily driver.
anyway, is it not possible to flash the rom through twrp?
Click to expand...
Click to collapse
As Q was at this stage and needed special twrp this rom is like it too
It should just goes some moth to update twrps to flash all R rom with them
Until a further notice you should use that twrp
_4PERTURE_ said:
Hey guys I still can't upload screenshots, if anyone would be able to do it for me I'd appreciate it
Click to expand...
Click to collapse
There are watermarks of a forum page, but still gives a clue.
carlshark said:
Hi @_4PERTURE_ I made a screen recording of StatixOS and uploaded it on YouTube. Hope this helps.
For some reason my F2FS /data partition cannot be properly detected by Lineage Recovery and I was initially unable to install. I reverted to TWRP, changed /data to EXT4, returned to Lineage Recovery and the install worked. But it might not have been the reason for working because according to Device Info HW, /data is still F2FS.
I cannot get into the Styles and Wallpaper menu.
Thank you for your hard work!
Click to expand...
Click to collapse
thanks for the video, it certainly give us a good heads up.
Have you tried in developers options:
windows animation scale
transition animation scale
and
Animator duration scale
all these three to set to 0.5 x and see if it gets even smoother and scroll much faster?
logosA said:
thanks for the video, it certainly give us a good heads up.
Have you tried
and see if it gets even smoother and scroll much faster?
Click to expand...
Click to collapse
I tried and it does get smoother and scroll much faster, which is the direct effect of adjusting those values anyway. I can say with confidence though that coming from MIUI and other ROMs like Pixel Experience/PE +/crDroid/EvolutionX/ion OS there is no discernible difference in smoothness and scroll speed.
Hi, first of all thank you so much for making this ROM, having a fully functional Android 11 ROM within days of the Android 11 Launch is amazing! Something I noticed though, is that whenever I try to mount /System and flash the Magisk zip file, when I reboot the Magisk app says that Magisk is not installed. Is there a fix?
Yoss Roness said:
Hi, first of all thank you so much for making this ROM, having a fully functional Android 11 ROM within days of the Android 11 Launch is amazing! Something I noticed though, is that whenever I try to mount /System and flash the Magisk zip file, when I reboot the Magisk app says that Magisk is not installed. Is there a fix?
Click to expand...
Click to collapse
Are you using magisk canary?
_4PERTURE_ said:
Are you using magisk canary?
Click to expand...
Click to collapse
Ah, no, should I be?
An update has been pushed, enjoy!
Changelog:
- Fix IMS/VoLTE
- Switch to Pixel FP
- Switch back to regular SElinux and enable SElinux enforcing
- Fix proximity sensor bug (thanks to @wight554)
- Enable multi-color assistant trigger animation
- Remove google search bar from quickstep
- Force full screen on legacy apps
- Maybe other **** I might have forgotten
Download:
https://sourceforge.net/projects/ap...20200922-0436-11-v4.0-UNOFFICIAL.zip/download
Hello, this is just for kicks and giggles due to how the device will struggle due to high refresh rate, but I experimented with this device now (because I just got it). Even if this forum isn't active anymore, I'll just share the boot images that I modified. Basically, other devices uses partition named DTBO to store the blobs of the device tree, which then modders edit the partition contents to overclock the screen. But since our device doesn't have DTBO Partition, I know that it is instead appended to the zImage of the kernel. I just extracted it from zImage, modified and appended it back the zImage again.
YOU HAVE TO BE IN THE LATEST DUALITY PATCHED ROM (.192) TO BE ABLE TO FLASH THIS KERNEL!!
Instructions :
Download the boot image with refresh rate you desire then flash it with either fastboot or TWRP.
ENJOY High Refresh Rate on our Device ) !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's some screenshot.
Excellent work!
So is it also possible to decrease the refresh rate?
Do you think this could be made into a Magisk module?
GN-z11 said:
Hello, this is just for kicks and giggles due to how the device will struggle due to high refresh rate, but I experimented with this device now (because I just got it). Even if this forum isn't active anymore, I'll just share the boot images that I modified. Basically, other devices uses partition named DTBO to store the blobs of the device tree, which then modders edit the partition contents to overclock the screen. But since our device doesn't have DTBO Partition, I know that it is instead appended to the zImage of the kernel. I just extracted it from zImage, modified and appended it back the zImage again.
YOU HAVE TO BE IN THE LATEST DUALITY PATCHED ROM (.192) TO BE ABLE TO FLASH THIS KERNEL!!
Instructions :
Download the boot image with refresh rate you desire then flash it with either fastboot or TWRP.
ENJOY High Refresh Rate on our Device ) !!!
Click to expand...
Click to collapse
Nice work bro
Can you also make for my XZs (G8231)?
It's has the same panel as XZ, but the kernel is different
treff89 said:
Excellent work!
So is it also possible to decrease the refresh rate?
Do you think this could be made into a Magisk moduIe?
Click to expand...
Click to collapse
I'm not sure if variable refreshrate is possible or can be ported yet. Making magisk module is pretty impossible since our device doesn't even have DTBO partition, the device tree blobs are "glued" to the kernel itself. So I'm not really that sure.
BadrolBinSalam said:
Nice work bro
Can you also make for my XZs (G8231)?
It's has the same panel as XZ, but the kernel is different
Click to expand...
Click to collapse
send me your boot image then I'll try to patch it for you.
Hi! wanna ask how to test if it really is working. like any games or vids that run 90 fps
waayo69 said:
Hi! wanna ask how to test if it really is working. like any games or vids that run 90 fps
Click to expand...
Click to collapse
Yes, but the device struggles already in operating at 60fps so you'll just notice it at scrolling and some light animations.
im getting this weird glitch. as u can see i have the same duality rom installed. possible issue? i installed magisk 23.
GN-z11 said:
send me your boot image then I'll try to patch it for you.
Click to expand...
Click to collapse
here my boot image (already patched DRMfix)
I also include untouched kernel.sin if needed
waayo69 said:
View attachment 5553545im getting this weird glitch. as u can see i have the same duality rom installed. possible issue? i installed magisk 23.
Click to expand...
Click to collapse
Are you using replacement screen? maybe you're using different panel that's why it's bugging like that.
BadrolBinSalam said:
here my boot image (already patched DRMfix)
I also include untouched kernel.sin if needed
Click to expand...
Click to collapse
I'll work on it.
GN-z11 said:
Are you using replacement screen? maybe you're using different panel that's why it's bugging like that.
Click to expand...
Click to collapse
probably using a replacement lcd. this was given to me last feb. and repair (very bad repair attempt) is noticable. shame
waayo69 said:
probably using a replacement lcd. this was given to me last feb. and repair (very bad repair attempt) is noticable. shame
Click to expand...
Click to collapse
I noticed some light bleeding at the edge too, you got a bad replacement lcd. You can try 75hz if it still bugs out or not.
Hi Bro, how Can I used on other custom rom? Like LOS 15 and 16?
Mahen_Rama said:
Hi Bro, how Can I used on other custom rom? Like LOS 15 and 16?
Click to expand...
Click to collapse
Currently running on my custom kernel EAS with the Stock Based Lineage OS 15.1 by SJILL.. I dunno if I will share it or not. I feel like this device isn't being worked on anymore. If you want to try then ask me.
GN-z11 said:
Currently running on my custom kernel EAS with the Stock Based Lineage OS 15.1 by SJILL.. I dunno if I will share it or not. I feel like this device isn't being worked on anymore. If you want to try then ask me.
Click to expand...
Click to collapse
GN-z11 said:
Currently running on my custom kernel EAS with the Stock Based Lineage OS 15.1 by SJILL.. I dunno if I will share it or not. I feel like this device isn't being worked on anymore. If you want to try then ask me.
Click to expand...
Click to collapse
Hi Bro, I think I will try those. May I try them?
Mahen_Rama said:
Hi Bro, I think I will try those. May I try them?
Click to expand...
Click to collapse
I'll post it here later, I'll finalize the sched features first and modify vendor squashfs first.
Here's the current stats
GN-z11 said:
Here's the current statsView attachment 5563089
Click to expand...
Click to collapse
Wow... Good job bro..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixel Experience Plus 13 for Nubia Z17
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation).
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device.
What works?
Audio
Bluetooth
Botton backlight controll
Calls/SMS/Mobile data
Camera (Photo/Video/Flashlight)
DT2W
Fingerprint sensor
GPS
IR Control
NFC
Notification LED
Torchlight
Wifi
Selinux enforce
Issues
You tell me
Download
https://sourceforge.net/projects/kindle4jerry-rom/files/nx563j/peplus-13/
https://www.123pan.com/s/Zp0lVv-FWfk3
(The same file, use which link depends on your network)
Install Guide
Download the ROM zip
Install a compatible Recovery (TWRP Recovery)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash PixelExperience Plus
Reboot
Latest version
notice: If you encounter a double-layer status bar after updating, please delete /data/user_de/0/com.android.systemui and reboot.
2023-06-19 good, help me test it. (But not June security patch, may be several days later)
2023-05-24 2023-04-03 2023-03-15 No NFC.
2023-01-30(Not Recommended) BUG: May cause app crash
Source Code
Device Tree https://github.com/kindle4jerry/android_device_nubia_nx563j/tree/pep-13
Device Common https://github.com/kindle4jerry/android_device_nubia_msm8998-common/tree/pep-13
Kernel https://github.com/kindle4jerry/android_kernel_nubia_msm8998/tree/pep-13
Vendor https://github.com/kindle4jerry/android_vendor_nubia-pep
Thanks
@yangcyborg
@BeYkeRYkt
vry good.thank you brother
jep thanks a lot can't wait to try
非常感谢。我想应该会有官方版本。Thank you so much. I think there should be an official version.
very nice my friend nfc is perfectly working and by the way we got 240fps slow motion with this rom and i think also 22.6mp cam with bsg a11v7 snap apk very cool
老大：请教，Z17 不能刷Permissiver_v5，否则开机报错，有办法解决这个问题吗？谢谢。
Boss: Ask, Z17 can't flash Permissiver_v5, otherwise boot up to report an error, is there a way to solve this problem? Thank you.
Tims Fong said:
老大：请教，Z17 不能刷Permissiver_v5，否则开机报错，有办法解决这个问题吗？谢谢。
Boss: Ask, Z17 can't flash Permissiver_v5, otherwise boot up to report an error, is there a way to solve this problem? Thank you.
Click to expand...
Click to collapse
Which ROM? What is Permissiver_v5? Please upload.
aljoscha81 said:
very nice my friend nfc is perfectly working and by the way we got 240fps slow motion with this rom and i think also 22.6mp cam with bsg a11v7 snap apk very cool
Click to expand...
Click to collapse
Which google camera is better?
Dispossible said:
Which ROM? What is Permissiver_v5? Please upload.
Click to expand...
Click to collapse
就是这个补丁。this patch.
Tims Fong said:
就是这个补丁。this patch.
Click to expand...
Click to collapse
I see. Because Z17 need to sign boot.img. If you modify the boot.img. Please use this tool to sign your boot. Use this tools. (I used it on ubuntu x86, I don't know whether it work on windows).
https://github.com/kindle4jerry/boot_signer_for_nubia_nx563j
And I use Github Actions to build kernel and Sign boot.img.
https://github.com/kindle4jerry/KernelSU_Action_nx563j
If it works well, please give me a star.(疯狂暗示)
@Tims Fong
You can try to use some TWRP with sign boot. Such as 绯色_玻璃@weibo.cn.
Now Android removed /system/bin/dalvikvm, some flashable zip boot signer rely on dalvikvm to execute .jar. The boot signer I used is x86 version. So they dont work.
你可以尝试使用带有内核签名功能的TWRP比如之前绯色玻璃做的。
安卓移除了dalvikvm，一些卡刷签名工具依赖dalvikvm来执行jar文件进行签名，所以他们失效了
Dispossible said:
Which google camera is better?
Click to expand...
Click to collapse
i use the one from bsg they working fine for me :https://www.celsoazevedo.com/files/android/google-camera/
maybe arcore/playground is working again i don't test the new update
Dispossible said:
@Tims Fong
You can try to use some TWRP with sign boot. Such as 绯色_玻璃@weibo.cn.
Now Android removed /system/bin/dalvikvm, some flashable zip boot signer rely on dalvikvm to execute .jar. The boot signer I used is x86 version. So they dont work.
你可以尝试使用带有内核签名功能的TWRP比如之前绯色玻璃做的。
安卓移除了dalvikvm，一些卡刷签名工具依赖dalvikvm来执行jar文件进行签名，所以他们失效了
Click to expand...
Click to collapse
绯色玻璃3.2.3可以签名成功，但是不起作用，手机还是报错被锁。另外版本太低，根本就不适应A12/A13.魔趣3.3.1从来就没有签名成功过。
Crimson Glass 3.2.3 can be signed successfully, but it does not work, and the phone is still locked with an error. In addition, the version is too low to adapt to A12/A13.MoKee 3.3.1 has never been successfully signed.
Tims Fong said:
绯色玻璃3.2.3可以签名成功，但是不起作用，手机还是报错被锁。另外版本太低，根本就不适应A12/A13.魔趣3.3.1从来就没有签名成功过。
Crimson Glass 3.2.3 can be signed successfully, but it does not work, and the phone is still locked with an error. In addition, the version is too low to adapt to A12/A13.MoKee 3.3.1 has never been successfully signed.
Click to expand...
Click to collapse
那你就用我给的github那个工具签名
Use the boot signer given above.
by the way to sign boot you have to mount vendor and system manually or am i wrong?
aljoscha81 said:
by the way to sign boot you have to mount vendor and system manually or am i wrong?
Click to expand...
Click to collapse
What is your method? I used x86 PC to sign. Because I dont find TWRP by 绯红玻璃. Several years ago I used 绯红玻璃 but now I dont have it. The TWRP by yangcyborg dont have sign boot functions.
@Tims Fong do you need it to install nippon gsis ?
Dispossible said:
What is your method? I used x86 PC to sign. Because I dont find TWRP by 绯红玻璃. Several years ago I used 绯红玻璃 but now I dont have it. The TWRP by yangcyborg dont have sign boot functions.
Click to expand...
Click to collapse
i take a look i got several twrps from the past got the bootsigner function inbuild i will upload here then you have to test cause i am not at home at the moment
wait few seconds
aljoscha81 said:
i take a look i got several twrps from the past got the bootsigner function inbuild i will upload here then you have to test cause i am not at home at the moment
wait few seconds
Click to expand...
Click to collapse
Thanks
ok twrps are up the second one is from nfound i think but the one from xiu is 100% build in bootsigner i think i can remember that the guy has bring up los 17.1 got also a twrp with build in bootsigner but don't know wich one good luck and let me know what is working for you