Hello guys,
as many of us, I cant recognise my HDD under windows to be able to sync Lotus with the phone directly.
I tried everything, but it seems nothing working....
using HTC sync (both the last version and the version I had on the phone SD card), it says that the driver installation has failed...
I tried also to edit the android-winusb.inf adding lines, but even this doesn't work...
I can see my phone as USB drive....but not in sync mode...
Any other suggestions????
Is it possible that there is no a single file that can solve it???
Thanks mates!
Marco
Solved!!!
Hello guys,
I've solved the issue by myself....just modifying the .inf file that comes with sdk.
Attached the solution which worked for me!!
Hope can help comebodyelse!!!
Cheers
Marco
PS:....just update the ADB driver from the my computer/right click/ properties/hardware/device manager
DUUUUUUUUUUUUUUDE YOU ARE MY HERO!!!!!!!!!!!!!!!!!!!!!!
I searched the entire internet for the stupid driver..... and you, YOU sir done it!!
respec++++++
---------- Post added at 04:33 PM ---------- Previous post was at 04:14 PM ----------
DUUUUUUUUUUUUUUUUDE YOU ARE MY HERO!!!!!!!!!!!
I searched the entire internet for this stupid driver problem..... and you, YOU sir did it!!!!
RESPEC+++++++++++++
I just backed up all apps and system data using the free version of Titanium Backup. It stored to the default location: /mnt/sdcard/TitaniumBackup
Now, when I connect with usb to my laptop and browse that folder it is empty, contains 0 files 0 bytes. I can browse both on my phone and through my laptop using adb shell and it shows the files are there in the folder, but folder shows empty through USB.
I would really like to have a backup of everything on my laptop, please help. I just finished searching for half an hour and found nothing.
I got the same problem on Mac (using the Android File Transfer)
i had the same problem using windows. i just disconnected the phone and tried again ~30 mins later and for some reason i could see the files. this has happened a couple times to me and each time if i'm just patient, the files will eventually show up. not sure why this is happening though...
---------- Post added at 03:00 AM ---------- Previous post was at 02:51 AM ----------
maybe try restarting your phone as well
Solved
thebrightside said:
i had the same problem using windows. i just disconnected the phone and tried again ~30 mins later and for some reason i could see the files. this has happened a couple times to me and each time if i'm just patient, the files will eventually show up. not sure why this is happening though...
---------- Post added at 03:00 AM ---------- Previous post was at 02:51 AM ----------
maybe try restarting your phone as well
Click to expand...
Click to collapse
Just tried re-connecting the phone and that worked, strange. I can see all the files now and pull them off, thanks a bunch!
The Issue
So, as you certainly noticed, ICS-toting devices such as the Galaxy Nexus do not come with the USB Mass Storage feature anymore.
On Windows, you can mount your storage using MTP (Media Storage Protocol)
On Linux and OS X, from what I've seen, there have been some attempts at building drivers for MTP but those seem to provide quite unreliable connectivity.
On Windows itself, it appears that the protocol takes quite a while to mount your device.
Google does not offer USB Mass Storage anymore in part due to the fact that you would need to unmount your whole storage from your phone to mount it on your computer.
The Solution
Alt Mounter! (I know, such an original name)
Alt Mounter is two things: 1) a small service and its widget, running on your device; 2) a helper running on your computer.
When you use Alt Mounter, mounting your storage on your computer is close to instantaneous. It works like a Dual Mount application; i.e. it does not unmount your storage from your device (it does not need to)
Platforms
Currently, the helper only exists for OS X and Windows (updated 05/06). It should not take long to port it to Linux if there is a demand.
The OS X version requires you to install OSXFUSE or any other FUSE package. It does not install these drivers itself because many MAC owners have already installed FUSE one way or another (for instance, OS X running in Parallels will not require any extra installation)
The Windows version will only work on a fairly recent version of Windows and will require you to install your device manufacturer's USB drivers. It is even more rough than the OS X version!
GET IT
Alt Mounter is currently a beta product. I use it without problem daily on my Galaxy Nexus and my CM9 Touchpad but of course your mileage may vary.
In fact, I am now aware of the following issues:
- The Android app may stop functioning after a while -- workaround: only run the app when you are using it (otherwise your icon should be gray with no shade of red)
- The Mac app seems to only work on Lion. Hopefully the latest version I uploaded fixes this pure SDK limitation.
- The helpers may be very capricious as they are so, so young.
Thank you for your patience and, more importantly, your feedback.
Get it from the Beta Page.
having a issue downloading the apok for android.
"Sorry, this page doesn't exist" I was happy but it cannot be downloaded. :-(
All my apologies! This should now be fixed.
should i uninstall android file transfer
---------- Post added at 08:14 PM ---------- Previous post was at 08:11 PM ----------
because i run the widget downloaded FUSE and altmounter on mac, and it says
"device not detected"
---------- Post added at 08:16 PM ---------- Previous post was at 08:14 PM ----------
did uninstall didn't matter same results.
requesting a linux port
Pithism said:
should i uninstall android file transfer
---------- Post added at 08:14 PM ---------- Previous post was at 08:11 PM ----------
because i run the widget downloaded FUSE and altmounter on mac, and it says
"device not detected"
---------- Post added at 08:16 PM ---------- Previous post was at 08:14 PM ----------
did uninstall didn't matter same results.
Click to expand...
Click to collapse
I know I uninstalled android file transfer mostly because it is not a very nice application.
Try this incredibly simple thing: unplug your phone, plug it back in, see if it works now. I observed that the Helper may fail to notice a device when it is first asked to mount it.
ok ill give it a try
---------- Post added at 10:15 PM ---------- Previous post was at 10:05 PM ----------
still not working
i tried it and it doesn't want to mount it
Works fine for now, I'm going to test it a bit more but so far so good, thanks for this great mod, that's what I was looking for.
-Update-
Well it was too beautiful to be true, I cannot do anything on my "Mounted device", if I try to copy something it says that i do not have the right permissions, if i try to create a new folder it says "Cannot complete operation (-43)". I tried everything, stop service restart computer, restart phone and nothing, I will keep an eye on this, because I'm very interested on this.
Pithism said:
ok ill give it a try
---------- Post added at 10:15 PM ---------- Previous post was at 10:05 PM ----------
still not working
i tried it and it doesn't want to mount it
Click to expand...
Click to collapse
OK. Let's see...
1) Does the widget turn partially red after a few seconds?
2) System Settings > Developer Options > USB Debugging: is it checked?
Cheers,
-Chris.
Hi there!
I totally plan on writing about this for the XDA Portal...and I would also love it if you ported it for Windows because I'm not a fan of MTP
Another vote for the Windows port.
Please let me know if you need a tester as I'm running Windows 8CP and could help to make sure it works going forward from win7.
Thank you can't wait for windows version
Need this for Linux.
Sent from my Galaxy Nexus
cyansmoker said:
OK. Let's see...
1) Does the widget turn partially red after a few seconds?
2) System Settings > Developer Options > USB Debugging: is it checked?
Cheers,
-Chris.
Click to expand...
Click to collapse
Yes to both.
screen says server is starting, and the widget turns red and stays red.
And usb debugging is checked.
Windows Port Needed!
xi.lin said:
Windows Port Needed!
Click to expand...
Click to collapse
Would LOVE a windows port. Hopefully ones thats portable and doesnt need to be installed.
+1 for Windows (7) & portable version
i'm probably one of very few, but i actually prefer mtp over usb mass storage. since my ns4g rom doesn't offer mtp, would this act as mtp for me by leaving my storage partition mounted while connected??
if so, i will vote for a windows build please!
+1 Windows & Portable
My phone shows up in windows Explorer, and I can delete stuff, but trying to paste stuff I get Cannot copy item. blah blah blah
What am I missing. This used to work fine before LIH. I am trying to update from LIH to LJ1.
Thanks.
easy
Bielinsk said:
My phone shows up in windows Explorer, and I can delete stuff, but trying to paste stuff I get Cannot copy item. blah blah blah
What am I missing. This used to work fine before LIH. I am trying to update from LIH to LJ1.
Thanks.
Click to expand...
Click to collapse
go to setting ---developer opt----make sure u check USB debugging and allow mock Location...
next when you plug in ur usb use the pull down bar click on connected-----make sure media device (mtp) is check.. u sould be good
---------- Post added at 12:26 PM ---------- Previous post was at 12:22 PM ----------
Bielinsk said:
My phone shows up in windows Explorer, and I can delete stuff, but trying to paste stuff I get Cannot copy item. blah blah blah
What am I missing. This used to work fine before LIH. I am trying to update from LIH to LJ1.
Thanks.
Click to expand...
Click to collapse
did you that there will be a new leak on 10/24 the lj2..................................
HoustonKid29 said:
go to setting ---developer opt----make sure u check USB debugging and allow mock Location...
next when you plug in ur usb use the pull down bar click on connected-----make sure media device (mtp) is check.. u sould be good
---------- Post added at 12:26 PM ---------- Previous post was at 12:22 PM ----------
did you that there will be a new leak on 10/24 the lj2..................................
Click to expand...
Click to collapse
Yea, Frezza has it now and is uploading.
I will try this. Looks like I may have some bad files downloaded. Other stuff copies fine.
Just got my mi 9 SE bricked through an OTA update.
I think I already tried most of the suggestions around:
- xiaomimiflash
- miflashpro
- mipcsuite
- xiaomitool
- xiaomitool v2
Also tried both available ROMs in miui website.
Locked bootloader, and I can enter fastboot mode.
How am I supposed to fix this? I need my phone back.
you dont... send it back to seller
---------- Post added at 03:35 PM ---------- Previous post was at 03:22 PM ----------
or bring it to a mi service center. that is the official response at the moment https://c.mi.com/thread-2251372-2-1.html
laviniu_c said:
you dont... send it back to seller
---------- Post added at 03:35 PM ---------- Previous post was at 03:22 PM ----------
or bring it to a mi service center. that is the official response at the moment https://c.mi.com/thread-2251372-2-1.html
Click to expand...
Click to collapse
the problem is that not even the seller has a solution.
Xiaomi on it's best, I can assure that it was the last xiaomi phone i bought
found a temporary solution:
- boot into fastboot mode. press volume down and power until you see the mi bunny.
- install and run minimal adb & fastboot on a pc
- plug phone to pc
- run "fastboot devices" you should see a line with device id & fastboot
- run "fastboot continue"
It will return to the previous version and you wont lose anything.
quick update/question:
anyone with 201903 working ota? or 201904 failing? (the manufacturing date is printed on the phone box back, bottom right near the sn barcode)
Yes, it’s work for me. But it must be repeated at each start. I fix it if I do a factory data reset ? Sorry for my bad English