My Phone is Redmagic 5g NUBIA_NX659J Model
i got this screen when trying to root it So Please Can any one can help me i just bought it today and i am so sad please help me to fix this and ty guys
Please help
Helllp me plz mod
Noways500 said:
Helllp me plz mod
Click to expand...
Click to collapse
Phone runs Android 10 and has a Snapdragon chip.
What have you done so far to root it? Please fully describe the steps.
jwoegerbauer said:
Phone runs Android 10 and has a Snapdragon chip.
What have you done so far to root it? Please fully describe the steps.
Click to expand...
Click to collapse
I unlock oem and open USB debugging then download twrp 3.4.1B and try to install it by fastboot mode with adb on my computer after in flash twrp I reboot to recovery but I got this error
@Noways500
I think you should repost your issue here:
https://forum.xda-developers.com/nu...how-to-unlock-bootloader-redmagic-5g-t4081743
Related
my phone bricked and computer recognize "QHSUSB_BULK".
I use QPST to flash boot for it but no have mpgr and mbn for chip msm8992.
please yous have share for me thanks. sorry my english
Please anyone give us the solution please help some one repair this via usb cable so there was a solution!!!
But how please can anyone help us
Br
Shahzaib Jahangir
darkdevil15101992 said:
my phone bricked and computer recognize "QHSUSB_BULK".
I use QPST to flash boot for it but no have mpgr and mbn for chip msm8992.
please yous have share for me thanks. sorry my english
Click to expand...
Click to collapse
I know on g3 this was considered hard brick had to use wilcrack to reflash bootloader partitions cause the primary gtp is now corrupted for what ever reason g2 and g3 are unbrickable beacause of this i do know u need the tot of the firmware u bricked on have to extract 4 or 5 partitions from said tot. Then flash them to ure phone
Search for g3 hard brick and it can give u a idea just ddont know how compatible it is yet ive done it on g2 and g3 im new to g4
http://forum.xda-developers.com/showthread.php?t=2582142
Ok but on willcracket there was 2nd loader.hex file which was only for msm8974 and 8974AC and our g4 is msm8992 and msm8994
So we badly need msm8992.hex file and rawprogram.xml
And as I see there is some mbn files also sbl1.mbn,sbl1 signed.mbn and more
We need those files for msm8992 please can anyone give us those files so we try it
Br
Shahzaib Jahangir
I got the same problem, my device stops during upgrade and bootloader freeze, I can't enter in download mode, e don't clean in a recovery.
Sometimes it's back, but my win7 64 don't recognize him, few a minutes display off and pc recognized like as qhsusb_bulk!
Night vampire said:
I got the same problem, my device stops during upgrade and bootloader freeze, I can't enter in download mode, e don't clean in a recovery.
Sometimes it's back, but my win7 64 don't recognize him, few a minutes display off and pc recognized like as qhsusb_bulk!
Click to expand...
Click to collapse
Hi, do you have a solution?
manuel1496 said:
Hi, do you have a solution?
Click to expand...
Click to collapse
Bro try board diag
bilawal.sarfraz.1 said:
Bro try board diag
Click to expand...
Click to collapse
What's that?
manuel1496 said:
What's that?
Click to expand...
Click to collapse
Bro tell me first that what your pc is show:
1) QHS_USB BULK 9006.
2) QHS_USB BULK 9008.
TELL ME THAT WHICH TYPE OF DEVICE IS SHOWB IN YOUR PCS DEVICE MANAGER WHEN YOU CONNECT YOUR PHONE WITH PC.
Hi,
I got a G4 H815 from a friend. He tried to install a custom firmware and killed the G4.
I see the G4 in the device manager as a qualcomm HS-USB QDloader 9008, but nothing more.
With the LGFlash Tool: It will transfer the files, but after 8 seconds it fails caus of missing download mode.
With LGUP, after I changed the driver to an LG USB COM Port, it connected but at Model: Unknown model. And stopped
I think, I have to install first a bootloader on the device, but how?
Someone can help pls?
midwayhero said:
Hi,
I got a G4 H815 from a friend. He tried to install a custom firmware and killed the G4.
I see the G4 in the device manager as a qualcomm HS-USB QDloader 9008, but nothing more.
With the LGFlash Tool: It will transfer the files, but after 8 seconds it fails caus of missing download modus.
With LGUP, after I changed the driver to an LG USB COM Port, it connected but at Model: Unknown model. And stopped
I think, I have to install first a bootloader on the device, but how?
Someone can help pls?
Click to expand...
Click to collapse
1) Did you put your phone in download mode before using LGUP?
2) You can install custom recovery using adb commands if your bootloader is unlocked.
rlamba said:
1) Did you put your phone in download mode before using LGUP?
2) You can install custom recovery using adb commands if your bootloader is unlocked.
Click to expand...
Click to collapse
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
midwayhero said:
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
Click to expand...
Click to collapse
Well for H815 we cant assure SD card will work
The only way is via Medusa pro Emmc repair if you need help pm me maybe i may help you[emoji4]
midwayhero said:
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
Click to expand...
Click to collapse
Try this dump!
It worked for me
dev8987.tiwari said:
Well for H815 we cant assure SD card will work
The only way is via Medusa pro Emmc repair if you need help pm me maybe i may help you[emoji4]
Click to expand...
Click to collapse
Thanks a lot, I will come back to your offer. Just wanna give the SD-Card solution one chance
-gloim- said:
Try this dump!
It worked for me
Click to expand...
Click to collapse
Thanks, you got a PM
Hello everyone,
I've recently unlocked my Honor 6A pro boot and since then, I have this annoying message appears every time I turn on my device tells me that my device is unlocked and not trusted. I tried everything to relock the boot again but I failed. It seems that I have to reflash the boot I'm going again to get rid of this message.
The problem is that I don't have a stock boot image and I can't find it anywhere !!
Could any one help me please to re-lock the boot again ?
Note:
Device is rooted and I can't un-root it neither.
Thanks in advance
Any ideas please ??
sshoukry said:
Hello everyone,
I've recently unlocked my Honor 6A pro boot and since then, I have this annoying message appears every time I turn on my device tells me that my device is unlocked and not trusted. I tried everything to relock the boot again but I failed. It seems that I have to reflash the boot I'm going again to get rid of this message.
The problem is that I don't have a stock boot image and I can't find it anywhere !!
Could any one help me please to re-lock the boot again ?
Note:
Device is rooted and I can't un-root it neither.
Thanks in advance
Click to expand...
Click to collapse
OP you're in the wrong forum. Please look for your device specific forum.
devilrulz4ever said:
OP you're in the wrong forum. Please look for your device specific forum.
Click to expand...
Click to collapse
There isn't any !
And due to that I'm new member; I can't post anywhere but here
sshoukry said:
There isn't any !
And due to that I'm new member; I can't post anywhere but here
Click to expand...
Click to collapse
Try the general android forum once you're able to post. I don't think you'll find what you're looking for, here.
devilrulz4ever said:
Try the general android forum once you're able to post. I don't think you'll find what you're looking for, here.
Click to expand...
Click to collapse
Thanks a lot ?
The story is because I installed the twrp recovery and then stupidly locked the bootloader again, now can't access fastboot and recovery. Please help me, it's my savings to buy the device :crying::crying::crying::crying:
chinhcb2k said:
The story is because I installed the twrp recovery and then stupidly locked the bootloader again, now can't access fastboot and recovery. Please help me, it's my savings to buy the device :crying::crying::crying::crying:
Click to expand...
Click to collapse
Go to service centre and ask them to install the software coz there's no tool too fix hard brick of this device.
Kenny 07 said:
Go to service centre and ask them to install the software coz there's no tool too fix hard brick of this device.
Click to expand...
Click to collapse
it's very far from where i live, i tried msm download tool but got a lot of trouble
chinhcb2k said:
it's very far from where i live, i tried msm download tool but got a lot of trouble
Click to expand...
Click to collapse
hey, did you fix your device ?? i got the same problem as yours
step 1: download this file https []//drive[/url][dot]google[/url][dot]com/open?id=1W-RWTtRa6HYq6s8F4Q3Zb-Bqa1V-4vTz
step 2 select da file and scatter file
step 3 just plug your hard bricked phone and it will start flashing
no xiaomi id needed just select files included in this zip and your choice of rom thats all .
" just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file from fastboot rom of your choice and press download then plug in your phone no need to press any button"
sorry for this kind of guide. this is my first post i just unbricked my phone few mins ago i thought everyone else who is facing this issue should know. tell me if this worked for you.
P.S. please remove [/url][dot] and add . thanks
After unbricking my phone i tried it again and found out that i can only use this software once and get popup msg to contact some "Kailash" Guy. I don't know him and please dont get scammed thanks. And I m back to locked redmi note 8 pro with Indian rom.
Account Kilash_bhai_aapko_yaad_karte_hi???????
bcrbfaycel said:
Account Kilash_bhai_aapko_yaad_karte_hi???????
Click to expand...
Click to collapse
Yes
it's a paying account ... I'm in Algeria and we can't afford to pay
s3rv3r111 said:
Yes
Click to expand...
Click to collapse
bcrbfaycel said:
Click to expand...
Click to collapse
Don't pay don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
T
thank you....yes m phone is dead :no recovery mode ...no bootloader
s3rv3r111 said:
Don't play don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
Click to expand...
Click to collapse
Please;how can i have a mi account authorized ??
s3rv3r111 said:
Don't play don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
Click to expand...
Click to collapse
How much to pay this guy for using his tool?
dacia19 said:
How much to pay this guy for using his tool?
Click to expand...
Click to collapse
Don't pay him any money
bcrbfaycel said:
thank you....yes m phone is dead :no recovery mode ...no bootloader
Click to expand...
Click to collapse
Then just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file and press download then plug in your phone no need to press any button
bcrbfaycel said:
Please;how can i have a mi account authorized ??
Click to expand...
Click to collapse
You can't get edl authorised account yet
s3rv3r111 said:
Don't pay don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
Click to expand...
Click to collapse
s3rv3r111 said:
Then just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file and press download then plug in your phone no need to press any button
Click to expand...
Click to collapse
yes i followed all these steps ... but when i plug usb cable ...opens Account Kilash_bhai_aapko_yaad_karte
Is anyone able to unbrick his/her device using this so flash tool. Or this so flash tool also require authorisation. please reply which person try this software.
So this method doesn't need an auth account to flash any firmware?
1hekill0r said:
Is anyone able to unbrick his/her device using this so flash tool. Or this so flash tool also require authorisation. please reply which person try this software.
Click to expand...
Click to collapse
I successfully unbricked my device with this software that's why I posted.
Worked great using SP Flash Tool v5.2016.00 and begonia_global_images_V11.0.2.0.PGGMIXM_20191201.0000.00_9.0_global_d12d50b900
Thank you very much
I am surprised this is not bigger news
Melon_Bread said:
Worked great using SP Flash Tool v5.2016.00 and begonia_global_images_V11.0.2.0.PGGMIXM_20191201.0000.00_9.0_global_d12d50b900
Thank you very much
I am surprised this is not bigger news
Click to expand...
Click to collapse
good news for other users
MiFlash 2019.12.6.0 works perfectly fine for me.
s3rv3r111 said:
step 1: download this file https []//drive[/url][dot]google[/url][dot]com/open?id=1W-RWTtRa6HYq6s8F4Q3Zb-Bqa1V-4vTz
step 2 select da file and scatter file
step 3 just plug your hard bricked phone and it will start flashing
no xiaomi id needed just select files included in this zip and your choice of rom thats all .
" just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file from fastboot rom of your choice and press download then plug in your phone no need to press any button"
sorry for this kind of guide. this is my first post i just unbricked my phone few mins ago i thought everyone else who is facing this issue should know. tell me if this worked for you.
P.S. please remove [/url][dot] and add . thanks
After unbricking my phone i tried it again and found out that i can only use this software once and get popup msg to contact some "Kailash" Guy. I don't know him and please dont get scammed thanks. And I m back to locked redmi note 8 pro with Indian rom.
Click to expand...
Click to collapse
My phone is locked and it says "This MIUI version can't be installed on your device". Help me plz if you can
failed
s3rv3r111 said:
I successfully unbricked my device with this software that's why I posted.
Click to expand...
Click to collapse
I failed, still a fail 0xC0060005
not working on my phone !?