stuck at bootloop after flashing rom (ugglite) - Xiaomi Redmi Note 5A Questions & Answers

i rooted my device then i on accident wipe system (no backup) and then when i try any rom it will stuck at xiaomi logo or logo of the rom (for example when i dowload lineage i was stuck at lineage loading screen).i tried dowloading new version of twrp but nothing.I dont know what to do.

Related

Stuck at Logo after flashing rom [fixed] > solution!

Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.

stuck at logo on boot

hi,
i just flashed boot.img on twrp recovery on recovery and boot and system and firmware. i khow i made a mistake. and then i flashed aex 5.4 and it comes with some error like : error unmounting firmware.... something like that. and i say that it installs but stuck at logo.
you guys have any solution?

My rn8 pro is bricked !! help mee plz

Hello brothers,
i tried to install a custom rom Corvus from twrp but it stuck in logo. ( i install twrp then i install vendor, then i install the rom = stuck at logo and disappear, auto turn on stuck a moment in logo and disappear again ...)
i still can enter to the recovery twrp + fastbooot
could you please help me
i did a backup before i installed the custom rom
I tried to install Corvus and got problems to, my phone bricked and didn't even go into twrp anymore, only fastboot.
I recommend you to follow this tutorial, it helped me to install Corvus. I did everything in the video and now custom roms are working 100%. It's in portuguese but just look at what he does in the video.
And if you wanna flash the anti brick, you need to be in Android 9

I need help!!

I was trying to install custom rom (evolution X 4.6) on my redmi note 8 pro and it went a little bad
I started off normal by unlocking the bootloader and flashing TWRP then I closed avb 2.0 and installed root and everything was fine and my phone was booting normally so then I went TWRP and wiped the default wipe then i clicked install and flashed the rom and so then i clicked reboot and i was greeted with a bootloop and i don't know what to do i tried flashing global MIUI 12 but when it tries to boot it ends up opening TWRP i also made the big mistake of not backing up my device before attempting to flash custom rom someone please help I'm trying to rollback to the factory firmware but i don't know how
i just found out you had to be android 9 to flash custom roms
now I can't even enter twrp and I tried reflashing it and I still can't enter it the only thing I can do rn is enter fastboot
NVM i fixed it using mitoolv2 www .xiaomitool.com/V2/

MIUI Boot Logo Stuck

So my device (joyeuse global) was using an official LineageOS 18.1 (January 2022), and now I wanted to go back to MIUI. So I used MiFlash to flash MIUI 12.5.4.0 on my device, and it succeeded. When my phone is booting, it took me 10+ minutes to notice that my device was stuck on the boot logo. I tried wiping data from its recovery but it's still stuck on boot logo. I also tried flashing OrangeFox Recovery, but it boot looped a few times and reverted its original recovery; it's also stuck on boot logo. So I tried flashing MIUI 12.5.4.0 via MiFlash again, succeed. 10 minutes later, it's still on the boot logo. Should I just wait for an hour or is it really stuck on boot logo? Please help.
You don't have to "delete data" but "format data"
SeptoneSirius said:
So my device (joyeuse global) was using an official LineageOS 18.1 (January 2022), and now I wanted to go back to MIUI. So I used MiFlash to flash MIUI 12.5.4.0 on my device, and it succeeded. When my phone is booting, it took me 10+ minutes to notice that my device was stuck on the boot logo. I tried wiping data from its recovery but it's still stuck on boot logo. I also tried flashing OrangeFox Recovery, but it boot looped a few times and reverted its original recovery; it's also stuck on boot logo. So I tried flashing MIUI 12.5.4.0 via MiFlash again, succeed. 10 minutes later, it's still on the boot logo. Should I just wait for an hour or is it really stuck on boot logo? Please help.
Click to expand...
Click to collapse
You have to do "format data" and answer "yes"
SeptoneSirius said:
So my device (joyeuse global) was using an official LineageOS 18.1 (January 2022), and now I wanted to go back to MIUI. So I used MiFlash to flash MIUI 12.5.4.0 on my device, and it succeeded. When my phone is booting, it took me 10+ minutes to notice that my device was stuck on the boot logo. I tried wiping data from its recovery but it's still stuck on boot logo. I also tried flashing OrangeFox Recovery, but it boot looped a few times and reverted its original recovery; it's also stuck on boot logo. So I tried flashing MIUI 12.5.4.0 via MiFlash again, succeed. 10 minutes later, it's still on the boot logo. Should I just wait for an hour or is it really stuck on boot logo? Please help.
Click to expand...
Click to collapse
When you miflash original firmware, it will lock the bootloader again I notised. So you cant flash custom recovery before you unlocked it again.
I dont remember how long but it took a quite long time before it finnished booting when I miflashed my curtana.
I have the same error.
I was following the guide from
Everithing is working with Nusantara_v4.0-1-12-miatoll-Gapps-10122021-OFFICIAL-1242.zip ROM but with official ROM's (Recovery ex: miui_JOYEUSEEEAGlobal_V12.5.7.0.RJZEUXM_d1c95eaf62_11.0.zip) always stuck on MIUI Logo

Categories

Resources