Oxygen OS 10.0.11HD65AA - OnePlus 7T Guides, News, & Discussion

Hey i share new update for op7t global.

I have not signal after the upgrade this are the specs that I followed
1 downloaded and installed from local upgrade
2 before reboot open magisk and install masgisk in the inactive partition
3 reboot and after my device first boot I got no signal and also the settings were kind of buggy, so I reboot like 3 times and everything is okey except for the missing signal

akuma48465 said:
I have not signal after the upgrade this are the specs that I followed
1 downloaded and installed from local upgrade
2 before reboot open magisk and install masgisk in the inactive partition
3 reboot and after my device first boot I got no signal and also the settings were kind of buggy, so I reboot like 3 times and everything is okey except for the missing signal
Click to expand...
Click to collapse
I use Oneplus 7T without root and everything is fine with the update. I have been using the update for a couple of hours and until now it seems that the heating that sometimes occurred with the battery was corrected.

akuma48465 said:
I have not signal after the upgrade this are the specs that I followed
1 downloaded and installed from local upgrade
2 before reboot open magisk and install masgisk in the inactive partition
3 reboot and after my device first boot I got no signal and also the settings were kind of buggy, so I reboot like 3 times and everything is okey except for the missing signal
Click to expand...
Click to collapse
What channel did you pull it from?
Sent from my HD1907 using Tapatalk

Hello guys, I also received the update via an external program to request updates, not through my device, and I am surprised that my device is slow to show updates, but I have a problem with the root file (OOS 10.0.9 magisk_patched.img) will it succeed this time because it no longer works for me after the last update I hope you answer my problem and thank you to everyone

Silly question, can an EU version of the phone (living in the UK) be transferred to the global ROM without losing functionality?

maddoguk said:
Silly question, can an EU version of the phone (living in the UK) be transferred to the global ROM without losing functionality?
Click to expand...
Click to collapse
Yes

Kollachi said:
Yes
Click to expand...
Click to collapse
Just straight forward flashing over the current ROM?

Karl said:
What channel did you pull it from?
Sent from my HD1907 using Tapatalk
Click to expand...
Click to collapse
Official update (stable) through settings

Use Canary
Sent from my HD1907 using Tapatalk

akuma48465 said:
I have not signal after the upgrade this are the specs that I followed
1 downloaded and installed from local upgrade
2 before reboot open magisk and install masgisk in the inactive partition
3 reboot and after my device first boot I got no signal and also the settings were kind of buggy, so I reboot like 3 times and everything is okey except for the missing signal
Click to expand...
Click to collapse
after apply the update once again without install magisk in the inactive partition I got my signal bars again, Im wating for the patched boot.img file of this oxygen os version to try to boot and directly install magisk

akuma48465 said:
after apply the update once again without install magisk in the inactive partition I got my signal bars again, Im wating for the patched boot.img file of this oxygen os version to try to boot and directly install magisk
Click to expand...
Click to collapse
were you have call recording module Installed ?

Snake.s9 said:
were you have call recording module Installed ?
Click to expand...
Click to collapse
yes
---------- Post added at 09:47 AM ---------- Previous post was at 09:17 AM ----------
Snake.s9 said:
were you have call recording module Installed ?
Click to expand...
Click to collapse
Now I understand Why ask that question
First I got the the magisk boot img of OS 10.0.11HD65AA and boot the file
I got root but without signal, also I update magisk to the canary channel
after turning of the call recorder module I got signal bars again thanks

I downloaded the update from the oxygen updater and installed locally, then after reading here I uninstalled the Recording module (because I had no signal) but I'm getting error when trying to access Settings (stop stopped working) I'm downloading the update file from here and reinstall it, any more guesses?
Thanks

I upgraded my wife's OnePlus 7T last night through the regular process right on the phone.
1. The phone has automatic system updates disabled through developer options.
2. Go to Magisk Manager click uninstall, select restore images, and do not reboot.
3. Go to settings on device, select system, system updates, let it update, do not reboot.
4. Got to Magisk Manager, select install next to Magisk, select install, install to Inactive Slot (after OTA), and now reboot phone.
It took a minute or so to reboot. The device booted up and everything works great, no issues at all. The only issue I have, my phone another 7T does not have the upgrade available.
Update: Forgot to mention, I am using regular Magisk 20.4 (20400) with Magisk Manager 7.5.1 (267).

agtsoul said:
I upgraded my wife's OnePlus 7T last night through the regular process right on the phone.
1. The phone has automatic system updates disabled through developer options.
2. Go to Magisk Manager click uninstall, select restore images, and do not reboot.
3. Go to settings on device, select system, system updates, let it update, do not reboot.
4. Got to Magisk Manager, select install next to Magisk, select install, install to Inactive Slot (after OTA), and now reboot phone.
It took a minute or so to reboot. The device booted up and everything works great, no issues at all. The only issue I have, my phone another 7T does not have the upgrade available.
Update: Forgot to mention, I am using regular Magisk 20.4 (20400) with Magisk Manager 7.5.1 (267).
Click to expand...
Click to collapse
Hi.
Can you explain step 2 in more detail? Is this step necessary? I have 10.0.9 rooted with Magisk 20.4 and several Magisk modules including Renovate Ice. Does step 2 delete all modules? Do I need to uninstall them manually before step 3? I read Renovate Ice hasn't been updated yet to be compatible with 10.0.11 yet.

Starzboy77 said:
Hi.
Can you explain step 2 in more detail? Is this step necessary? I have 10.0.9 rooted with Magisk 20.4 and several Magisk modules including Renovate Ice. Does step 2 delete all modules? Do I need to uninstall them manually before step 3? I read Renovate Ice hasn't been updated yet to be compatible with 10.0.11 yet.
Click to expand...
Click to collapse
From my understanding, step 2 just restores the patched boot image to the regular boot image. However, you still have root access because you have not rebooted yet. I did not delete or disable any modules on my wife's phone. She is only running systemless host for AdAway. I still have not received the update on my phone. But, the only modules I run on it are sytemless host and YouTube Vanced black themed v14.21.54.

Do you have new clocks in settings->lockscreen?

akuma48465 said:
after apply the update once again without install magisk in the inactive partition I got my signal bars again, Im wating for the patched boot.img file of this oxygen os version to try to boot and directly install magisk
Click to expand...
Click to collapse
I recently also got the 10.0.11 OTA update on the Global variant. While it was downloading and installing, a snuck a copy of it off the phone and extracted the image files from it.
the unpatched and Magisk Patch bootimage can be found here: Google Drive OnePlus 7T HD65AA Global v10.0.11
Note, this one was patched using the latest (at the time) canary build of Magisk (cd6eca1d) 20415.
Cyberstorm

arindam112 said:
Do you have new clocks in settings->lockscreen?
Click to expand...
Click to collapse
I don't see any new clocks.

Related

[GUIDE] How to Root OnePlus 7T without TWRP

So today with some testers i managed to make root on OnePlus 7T, I want to specify that 95% of the work was done by @topjohnwu (Magisk creator). For now you should use only Magisk Canary files
I will explain 2 different guides:
First Root Guide:
This guide is for a specific rom version, so you will need to use a specific patched boot.img
- Download the patched_boot.img
- Reboot your device in bootloader-fastboot mode
- Flash the patched_boot.img in the boot partition:
Code:
fastboot flash boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
Second Root Guide:
This guide is more generic than the first one, you should use this one if you are unable to find a specific patched boot.img
- Download a patched_boot.img (you should try with the latest one)
- Reboot your device in bootloader-fastboot mode
- Boot the patched_boot.img:
Code:
fastboot boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
- Click on Install, then direct install and wait the end of the process
- Reboot the device
Third Root Guide:
Guide by @gpz1100
TIPS:
Actually you should use only Magisk canary files Magisk 20.3
You can get the stock boot images from the fastboot rom: https://forum.xda-developers.com/oneplus-7t/how-to/rom-stock-fastboot-roms-oneplus-7t-t3979213
Actually i'm using magisk manager canary and magisk canary debug to patch the boot.img, I don't recommend updating magisk, if you don't want to see the updates install the normal magisk manager
Magisk 20.3 fully support OnePlus 7T and 7T Pro
HOW TO UPDATE a ROM and KEEP ROOT:
Before all Disable all magisk modules
Be sure to use Canary Magisk Manager and Canary Magisk (debug)
You can update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
Download:
Patched/Stock Boot Images: https://www.androidfilehost.com/?w=files&flid=300177
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Donations:
Credits:
@RohanAJoshi
Flashed and working flawless.
Really thanks for this.
Awesome work bro.
Can you please upload the patched boot.img please? I dont see it in the above folder at all.
nick_22 said:
Can you please upload the patched boot.img please? I dont see it in the above folder at all.
Click to expand...
Click to collapse
Done, i uploaded them using ftp and i forgot to move the files in the right folder
Working, thanks a lot @mauronofrio
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
jesrani said:
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
Click to expand...
Click to collapse
See OP, its clearly mentioned there. You have to flash this via fastboot and not any custom recovery. Firstly setup adb on your PC and then check the commands. Its very easy. Do some googling and still if its difficult for you, come back and ask.
jesrani said:
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
Click to expand...
Click to collapse
Welcome to the android scene, reminds me of the old psx scene
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
@mauronofrio, thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
nick_22 said:
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
Click to expand...
Click to collapse
Get your stock boot.img from 1st post.
Reboot to bootloader.
And do this command
fastboot flash boot boot.img
fastboot reboot
Device will boot unrooted.
---------- Post added at 05:58 AM ---------- Previous post was at 05:55 AM ----------
jesrani;80464121 [user=4712355 said:
@mauronofrio[/user], thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
Click to expand...
Click to collapse
1. Yes, always wipe
2. Just update as usual, let update go, after installation complete, don't reboot device. Go to magisk, install, install on inactive slot. Reboot. You will be rooted (Warning : this is not tested on 7T, this method from 7)
3. TWRP will be developed but some good dev like @mauronofrio need device for this, as of now, no hopes for twrp. We are lucky that we got root.
RohanAJoshi said:
1. Yes, always wipe
2. Just update as usual, let update go, after installation complete, don't reboot device. Go to magisk, install, install on inactive slot. Reboot. You will be rooted (Warning : this is not tested on 7T, this method from 7)
3. TWRP will be developed but some good dev like @mauronofrio need device for this, as of now, no hopes for twrp. We are lucky that we got root.
Click to expand...
Click to collapse
Thanks. Yes, root is good enough right now.
By "update as usual", do you mean through OTA? I think the phone reboots after update is downloaded and then installs the update but not sure. So once it reboots after updating, should I go to Magisk and install root?
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
jesrani said:
Thanks. Yes, root is good enough right now.
By "update as usual", do you mean through OTA? I think the phone reboots after update is downloaded and then installs the update but not sure. So once it reboots after updating, should I go to Magisk and install root?
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
Click to expand...
Click to collapse
In older devices like OP5T it happens like this, not in newer devices. OP7T has seamless updates, its installs while device is turned on in second partition.
nick_22 said:
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
Click to expand...
Click to collapse
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
jesrani said:
@mauronofrio, thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
Click to expand...
Click to collapse
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
mauronofrio said:
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
Click to expand...
Click to collapse
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
jesrani said:
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
Click to expand...
Click to collapse
Canary debug, don't update it
Help please. I have returned to Android after 5years with OnePlus 7t and trying to root it. I am trying this method but not being able to successfully root it. Steps I have tried
Went to fastboot mode by restarting the phone but I don't get an option to install the patched image file. And even boatloader is locked. Do I need to unlock the bootloader. And I unlock will I loose my data. Sorry for silly question I have completely forgot about Android.
Thanks, rooted successfully
?
To be honest need video tutorial asap?
mauronofrio said:
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
Click to expand...
Click to collapse
Ok. Got it. So, I have already booted back to unrooted mode now. And I cant wipe my data again. Thanks for your response.

Pre-rooted Boot Image OP7T Global HD65AA 10.0.6

Hello,
I have seen few requests about providing pre-rooted boot image file for OP7T Global (not Indian or European) version for firmware 10.0.6 so here you go.
Steps :
1) Reboot your phone in bootloader mode (fastboot mode).
2) Execute command fastboot boot magisk_patched.img
3) Reboot the device
4) Install Magisk Manager
5) Click on Install, then direct install and wait the end of the process
6) Reboot the device
Also attaching the stock boot file in case anything goes wrong.
P.S : I don't own Global OP7T.
Link : https://androidfilehost.com/?w=files&flid=302500
has anyone tried this one yet?
xrelic7 said:
has anyone tried this one yet?
Click to expand...
Click to collapse
I would if I could update to the Global rom. Local update fails on rooted Indian 10.0.6. Anyone can advise me on this?
damn i want to do it but i am afraid some of my apps will stop working cause idk if magiskhide will work at current time
xrelic7 said:
has anyone tried this one yet?
Click to expand...
Click to collapse
Yes, I tried on my 7t and it booted successfully!Thanks OP's work!!! By the way , I also flash Blu kernel via fk app and it also worked fine. But I don't test any magisk mondule.
23333 said:
Yes, I tried on my 7t and it booted successfully!Thanks OP's work!!! By the way , I also flash Blu kernel via fk app and it also worked fine. But I don't test any magisk mondule.
Click to expand...
Click to collapse
ty for the reply i might grow a few and give it a shot hopefully magiskhide is working so certain apps cant detect that i am rooted
I tried the method above it booted the first time without problems however when i installed magisk canary and tried it did not have the option to direct install idk if i did something wrong not sure
xrelic7 said:
I tried the method above it booted the first time without problems however when i installed magisk canary and tried it did not have the option to direct install idk if i did something wrong not sure
Click to expand...
Click to collapse
Are you using Global or Indian HD65AA ? Not getting an option to directly install means somehow the patched image did not boot and the original imaged booted.
imakul8 said:
I would if I could update to the Global rom. Local update fails on rooted Indian 10.0.6. Anyone can advise me on this?
Click to expand...
Click to collapse
You need to download the global 10.0.6 OTA not fastboot image in order to do the local update.
zeusofyork said:
You need to download the global 10.0.6 OTA not fastboot image in order to do the local update.
Click to expand...
Click to collapse
Yes, that's what I have.
1) Reboot your phone in bootloader mode (fastboot mode).
2) Execute command fastboot boot magisk_patched.img
3) Reboot the device
4) Install Magisk Manager
5) Click on Install, then direct install and wait the end of the process
6) Reboot the device
I've followed the above steps exactly but when I reboot the device it and open MAgisk Manager it shows that MAgisk is not installed. Any ideas?
Edit: I'm on Hd1900 Chinese variant running 10.0.6 global ROM
---------- Post added at 02:02 AM ---------- Previous post was at 01:18 AM ----------
ricksrod said:
1) Reboot your phone in bootloader mode (fastboot mode).
2) Execute command fastboot boot magisk_patched.img
3) Reboot the device
4) Install Magisk Manager
5) Click on Install, then direct install and wait the end of the process
6) Reboot the device
I've followed the above steps exactly but when I reboot the device it and open MAgisk Manager it shows that MAgisk is not installed. Any ideas?
Edit: I'm on Hd1900 Chinese variant running 10.0.6 global ROM
Click to expand...
Click to collapse
When you run step 2, it boots the phone. Step 3 says to reboot. Not sure if that is correct? Rebooting would just boot to the stock boot image again?
ricksrod said:
1) Reboot your phone in bootloader mode (fastboot mode).
2) Execute command fastboot boot magisk_patched.img
3) Reboot the device
4) Install Magisk Manager
5) Click on Install, then direct install and wait the end of the process
6) Reboot the device
I've followed the above steps exactly but when I reboot the device it and open MAgisk Manager it shows that MAgisk is not installed. Any ideas?
Edit: I'm on Hd1900 Chinese variant running 10.0.6 global ROM
---------- Post added at 02:02 AM ---------- Previous post was at 01:18 AM ----------
When you run step 2, it boots the phone. Step 3 says to reboot. Not sure if that is correct? Rebooting would just boot to the stock boot image again?
Click to expand...
Click to collapse
You're right. Just skip that step 3.
imakul8 said:
You're right. Just skip that step 3.
Click to expand...
Click to collapse
I did assume that so that's the step I followed.
Just to confirm, when I boot the patched image and install Magisk Manager and launch it, it should show that it is already installed? So I press "install" next to Magisk and direct install, this looks like it works. Then I reboot and I am not rooted, if I open Magisk Manager it shows that Magisk is not installed.
ricksrod said:
I did assume that so that's the step I followed.
Just to confirm, when I boot the patched image and install Magisk Manager and launch it, it should show that it is already installed? So I press "install" next to Magisk and direct install, this looks like it works. Then I reboot and I am not rooted, if I open Magisk Manager it shows that Magisk is not installed.
Click to expand...
Click to collapse
Right. Magisk said it was installed. I direct installed again, rebooted and Magisk was still installed. No idea to help you. ?
imakul8 said:
Right. Magisk said it was installed. I direct installed again, rebooted and Magisk was still installed. No idea to help you.
Click to expand...
Click to collapse
I've tried extracting the boot_img from my device and then patching that directly in Magisk and that does not work also, even though it reports a success, it doesn't appear to work.
When you install Magisk, what do you have ticked in the Advanced Settings out of:
Preserve Force Encryption
Preserve AVB 2.0/dm-verify
Recovery Mode
?
ricksrod said:
I've tried extracting the boot_img from my device and then patching that directly in Magisk and that does not work also, even though it reports a success, it doesn't appear to work.
When you install Magisk, what do you have ticked in the Advanced Settings out of:
Preserve Force Encryption
Preserve AVB 2.0/dm-verify
Recovery Mode
?
Click to expand...
Click to collapse
Just the first two. Not recovery mode.
imakul8 said:
Just the first two. Not recovery mode.
Click to expand...
Click to collapse
I've got it working now by using the Canary version of Magisk. I thought the stable version was now working?
ricksrod said:
I've got it working now by using the Canary version of Magisk. I thought the stable version was now working?
Click to expand...
Click to collapse
Stable is working for me, but good that you got it working. ?
Can someone check if magisk hide is working properly? Thanks
Jeens99 said:
Can someone check if magisk hide is working properly? Thanks
Click to expand...
Click to collapse
It works. Snapchat and my banking app don't like root. They're working fine.

How come Magisk did not back up my stock boot image?

Hi all I got a 7T in the US. I got an update notification, and i wanted to uninstall Magisk, perform the update, reinstall Magisk and reboot. In Magisk I get the message, "stock image does not exist." I never had this problem with my Pixel, how can I get Magisk to save an image after I update and reroot?
Thanks
Droid_Nut said:
Hi all I got a 7T in the US. I got an update notification, and i wanted to uninstall Magisk, perform the update, reinstall Magisk and reboot. In Magisk I get the message, "stock image does not exist." I never had this problem with my Pixel, how can I get Magisk to save an image after I update and reroot?
Thanks
Click to expand...
Click to collapse
Why do you want to uninstall magisk?
1. Install update and don't reboot.
2. Go to magisk and install after ota
3. Reboot
I don't know about restore stock image with magisk and never did that.
If you really want to unroot your phone now, download the correct boot.img and flash it. There are a few threads available here to find that image you need.
Also you can download the ota.zip and dump that payload.bin which is inside the zip.
Like kollachi said, you don't need to follow the standard pattern of uninstall/ota/install-inactive with the 7t. I imagine that's because with a rooted device, it pulls the full rom instead of a diff.
But it sounds like you directly flashed a rooted boot.img which is why magisk doesn't have a backup. Instead, you should have done a `fastboot boot patched_boot.img` and then done a magisk install. It would have taken a backup of your original boot.img and then installed a patched version.
So basically install the Ota right over root, open magisk manager and install root, then finally reboot?
With the pixels and others, you have to uninstall magisk with restore boot image, install the update, install magisk again, then reboot.
Thanks for all of the help.
ziddey said:
Like kollachi said, you don't need to follow the standard pattern of uninstall/ota/install-inactive with the 7t. I imagine that's because with a rooted device, it pulls the full rom instead of a diff.
But it sounds like you directly flashed a rooted boot.img which is why magisk doesn't have a backup. Instead, you should have done a `fastboot boot patched_boot.img` and then done a magisk install. It would have taken a backup of your original boot.img and then installed a patched version.
Click to expand...
Click to collapse
I installed magisk with twrp, the twrp that you boot off of pc into temporary memory.
it's the same procedure you're used to. you just don't need to uninstall first since it's a full ota instead of a diff
Just wondering, will it back up my new stock boot image after the update, and the install from Magisk Manager?
Droid_Nut said:
Just wondering, will it back up my new stock boot image after the update, and the install from Magisk Manager?
Click to expand...
Click to collapse
No I don't think so. I can't find anything on my phone.
Kollachi said:
No I don't think so. I can't find anything on my phone.
Click to expand...
Click to collapse
I guess it really does not matter, considering we don't have to uninstall root.
yes it does..
backups are saved to /data/magisk_backup_<hash>/boot.img.gz
I have one for every time I've (re)installed magisk
ziddey said:
yes it does..
backups are saved to /data/magisk_backup_<hash>/boot.img.gz
I have one for every time I've (re)installed magisk
Click to expand...
Click to collapse
I still do not have a backup I did the OTA, and then reinstalled Magisk "Direct Install (Recommended)", but I guess I should have picked "After OTA to slot A or B" as I had no root on reboot. So I had to TWRP it back to root.
Lots to learn, but I am gaining. :good:
Droid_Nut said:
I still do not have a backup I did the OTA, and then reinstalled Magisk "Direct Install (Recommended)", but I guess I should have picked "After OTA to slot A or B" as I had no root on reboot. So I had to TWRP it back to root.
Lots to learn, but I am gaining. :good:
Click to expand...
Click to collapse
Yep the correct way is install after ota.
Droid_Nut said:
I still do not have a backup I did the OTA, and then reinstalled Magisk "Direct Install (Recommended)", but I guess I should have picked "After OTA to slot A or B" as I had no root on reboot. So I had to TWRP it back to root.
Lots to learn, but I am gaining. :good:
Click to expand...
Click to collapse
I mean you did that last time and it didn't backup your boot. Fair to assume you'll get the same results if you do it again.
When you install to inactive next time, it should create a backup since the boot image will be intact
With the Pixel it always recommended install to inactive slot and I went with what was recommended.
With the Pixel it always recommended install to inactive slot and I went with what was recommended.
Hi,
I was trying to update my OnePlus 7t to 10.3.3HD65AA but I am not able to do it. This is what I am doing
1) downloading the update package from oxygen updater application
2) going to setting then in system update I am clicking on more option and then on selecting local update then selecting the package waiting for upgrade to complete.
3) now going to magisk manager and installing the manager in inactive slot and rebooting the device
The phone gets reboot but doesn't update also attaching my magisk log here
Hi,
I was trying to update my OnePlus 7t to 10.3.3HD65AA but I am not able to do it. This is what I am doing
1) downloading the update package from oxygen updater application
2) going to setting then in system update I am clicking on more option and then on selecting local update then selecting the package waiting for upgrade to complete.
3) now going to magisk manager and installing the manager in inactive slot and rebooting the device
The phone gets reboot but doesn't update also attaching my magisk log here
jazzy ╰_╯ said:
Hi,
I was trying to update my OnePlus 7t to 10.3.3HD65AA but I am not able to do it. This is what I am doing
1) downloading the update package from oxygen updater application
2) going to setting then in system update I am clicking on more option and then on selecting local update then selecting the package waiting for upgrade to complete.
3) now going to magisk manager and installing the manager in inactive slot and rebooting the device
The phone gets reboot but doesn't update also attaching my magisk log here
Click to expand...
Click to collapse
I used method 3 to root my 7T a while back and did the update from 10.0.9 to 10.0.11 this morning. Did you do the full update? AFAIK the incremental update won't work
Used Oxygen Updater to download the update (DO NOT FOLLOW THEIR INSTALLATION INSTRUCTIONS)
Did local upgrade from Settings/System/System updates (options wheel) DO NOT REBOOT
Opened Magisk Manager and did a direct reinstall of Magisk (not manager) then
Installed Magisk into inactive slot
Reboot.

General 11.2.7.7.LE15AA Rolling Out

Already prompted to install 11.2.7.7. About to install/re-root.
Normal process for taking the OTA and keeping root worked without any issue.
are you doing both Direct & Inactive slot Install before Reboot?
dmarden said:
Already prompted to install 11.2.7.7. About to install/re-root.
Click to expand...
Click to collapse
where did you get it?
dmarden said:
Normal process for taking the OTA and keeping root worked without any issue.
Click to expand...
Click to collapse
Can you give me the kernel patch file? magisk
Hey, I just got the update, and Restoring the boot image with Magisk no longer allows me to install the update without unrooting. at first it is downloading for a bit, then it goes to "installation problem", which is not something that happened last time
Is this normal?
Andrew8578 said:
Hey, I just got the update, and Restoring the boot image with Magisk no longer allows me to install the update without unrooting. at first it is downloading for a bit, then it goes to "installation problem", which is not something that happened last time
Is this normal?
Click to expand...
Click to collapse
You don't need to restore anything in order to update to a New OTA. Simply disable any magisk module you use. Reboot your device then let the OTA install it self. Once done, DO Not reboot and just go to magiskmanager, and install magisk to the available slot. After what you can reboot your device, re apply your magisk modules. Et voilà
Fre$h said:
You don't need to restore anything in order to update to a New OTA. Simply disable any magisk module you use. Reboot your device then let the OTA install it self. Once done, DO Not reboot and just go to magiskmanager, and install magisk to the available slot. After what you can reboot your device, re apply your magisk modules. Et voilà
Click to expand...
Click to collapse
I just did that and nothing has changed. If someone can give the 11.2.7.7aa image, that would help alot
galaxys said:
are you doing both Direct & Inactive slot Install before Reboot?
Click to expand...
Click to collapse
Yes
vibrantliker said:
where did you get it?
Click to expand...
Click to collapse
Just through the normal system updater.
dimmed said:
Can you give me the kernel patch file? magisk
Click to expand...
Click to collapse
No, sorry, I don't do this.
Andrew8578 said:
Hey, I just got the update, and Restoring the boot image with Magisk no longer allows me to install the update without unrooting. at first it is downloading for a bit, then it goes to "installation problem", which is not something that happened last time
Is this normal?
Click to expand...
Click to collapse
I followed my normal process (I don't use any Magisk modules):
Magisk Uninstall->Restore Images (do not reboot)
Take OTA (do not reboot)
Install Magisk to both active and inactive
Reboot
Worked without issue, as always.
I found 11.2.7.7.LE15AA, disabled all magisk modules rebooted, installed update reinstalled magisk to other slot, rebooted now I'm boot looped and in recovery, set it back from A to B (was previously on B), as obviously slot_A is non-functional or something went wrong with the upgrade from 11.2.5.5.LE15AA to 11.2.7.7.LE15AA, same problem still boot-looped.
Maybe teh custom kernel was to blame, I'll try restoring boot image and try again
I'd so prefer a full zip if they every provide one for the LE15AA version, as this method is never easy
egandt said:
I found 11.2.7.7.LE15AA, disabled all magisk modules rebooted, installed update reinstalled magisk to other slot, rebooted now I'm boot looped and in recovery, set it back from A to B (was previously on B), as obviously slot_A is non-functional or something went wrong with the upgrade from 11.2.5.5.LE15AA to 11.2.7.7.LE15AA, same problem still boot-looped.
Maybe teh custom kernel was to blame, I'll try restoring boot image and try again
I'd so prefer a full zip if they every provide one for the LE15AA version, as this method is never easy
Click to expand...
Click to collapse
Yeah, I don't do any custom kernel stuff or magisk modules, I cannot personally comment. What I know, for me, is the process fails 100% of the time if I don't do the Magisk image restore and it succeeds 100% of the time if I do.
I am currently on 11.2.4.4 AA (Global), rooted. Can I upgrade to the EU ROM since they tend to get full updates while AA has not been? If so, do I just flash the 11.2.6.6 EU ROM or should I flash 11.2.4.4 EU ROM then flash a more up-to-date ROM? If I flash the EU ROM, would I loose anything?
As rooted you have to flash OTA using full OTA zip file that you can download using oxygen updater app. Incremental OTA method cannot work properly.
On Oxygen updater app, download the full zip file (it will detect Magisk and advise you to use that method.)
Once downloaded, be sure that every magisk module are disabled and reboot.
Now go to parameters/system/system update then click on the upper right icon and chose local update. If it's not already done, point to the full zip file location and let the update process run to the end.
Once done, do not reboot and use magiskmanager to reflash magisk to the available slot.
Fre$h said:
As rooted you have to flash OTA using full OTA zip file that you can download using oxygen updater app. Incremental OTA method cannot work properly.
On Oxygen updater app, download the full zip file (it will detect Magisk and advise you to use that method.)
Once downloaded, be sure that every magisk module are disabled and reboot.
Now go to parameters/system/system update then click on the upper right icon and chose local update. If it's not already done, point to the full zip file location and let the update process run to the end.
Once done, do not reboot and use magiskmanager to reflash magisk to the available slot.
Click to expand...
Click to collapse
Not sure if this was for someone specific for their unique circumstance. If this was just meant generally, then it is inaccurate.
I don't use Oxygen Updater. I just take the incremental OTA using the steps I mentioned.
Fre$h said:
As rooted you have to flash OTA using full OTA zip file that you can download using oxygen updater app. Incremental OTA method cannot work properly.
On Oxygen updater app, download the full zip file (it will detect Magisk and advise you to use that method.)
Once downloaded, be sure that every magisk module are disabled and reboot.
Now go to parameters/system/system update then click on the upper right icon and chose local update. If it's not already done, point to the full zip file location and let the update process run to the end.
Once done, do not reboot and use magiskmanager to reflash magisk to the available slot.
Click to expand...
Click to collapse
Just letting you know, Oxygen Updater is stuck on 11.2.4.4, as is the OnePlus website.
dmarden said:
Already prompted to install 11.2.7.7. About to install/re-root.
Click to expand...
Click to collapse
I am also in 7.7 NA, is it possible to root NA version. As NA use google services for updates. how to update, i heard no full zips updates in NA
Atul Menon said:
I am also in 7.7 NA, is it possible to root NA version. As NA use google services for updates. how to update, i heard no full zips updates in NA
Click to expand...
Click to collapse
Easy. You open magisk and restore stock boot. Don't reboot yet. Download and install update. Don't reboot yet. Open magisk and install to inactive slot. Reboot.
dmarden said:
Normal process for taking the OTA and keeping root worked without any issue.
Click to expand...
Click to collapse
you are saying taking this incremental ota worked for you? I did the exact same steps (restore images, install without rebooting, install to inactive slot) and my system is still stuck on 11.2.4.4, I do not know what the issue is
thirtythr33 said:
you are saying taking this incremental ota worked for you? I did the exact same steps (restore images, install without rebooting, install to inactive slot) and my system is still stuck on 11.2.4.4, I do not know what the issue is
Click to expand...
Click to collapse
Works for me every time...that way just post it.
netgar said:
Works for me every time...that way just post it.
Click to expand...
Click to collapse
yeah my system reports 11.2.4.4, yet have an incremental update for 11.2.7.7, which is odd for a number of reasons. long story short I'm sure it will cause me issues to try applying an incremental update that is not in order, but idk why 11.2.7.7 is showing up on my system, bc 11.2.6.6 never installed (or the system doesn't report it did)

Question OxygenOS 12 C.47 for 9 9 Pro

I got this on Oxygen Updater. Incremental OxygenOs 12 C.47 for 9 & 9 Pro.
Oxygen team started to push the incremental rollout of OxygenOS 12 update – C.47 for the OnePlus 9 and OnePlus 9 Pro. This update is already rolling out to the EU region, and NA will soon follow. Please note that some of the changes are only for NA version.
OP9
NA: LE2115_11_C.47
EU: LE2113_11.C.47
OP9 Pro
NA: LE2125_11_C.47
EU: LE2123_11.C.47
Changelog
System
[Optimized] the stability of communication
[Fixed] the issue of the operator's name displayed incorrectly
[Fixed] the low probability issue that unable to send MMS
[Improved] system stability
[Updated] Android security patch to 2022.03
Camera
[Optimized] the fluency of taking pictures
Official link:
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
I wonder if they've enabled N77 C-Band and the 5G UW icon for Verizon users.
Dear guy's.
I want to install this c 47 but in Android 12, i do not find the local update option that there is before in update menu... Where is it in this version as the update menu is in the menu "about the Phone" and not in system as before without thé local option . Thx in advance
Lolo78 said:
Dear guy's.
I want to install this c 47 but in Android 12, i do not find the local update option that there is before in update menu... Where is it in this version as the update menu is in the menu "about the Phone" and not in system as before without thé local option . Thx in advance
Click to expand...
Click to collapse
Check on OnePlus forums or XDA's, you'll find a link for the local update APK provided by OnePlus since Android 12 (there's a pinned topic about the updates, you should find it here).
https://oxygenos.oneplus.net/OPLocalUpdate_For_Android12.apk
Hey guys, im not able to do incremental updates on my rooted OP9Pro. But I can do a full update with the system updates app. Does anyone have a link for the complete C47 update no the incremental update.
Any help will be greatly appreciated.
PS: Indian version
mrironsights said:
Hey guys, im not able to do incremental updates on my rooted OP9Pro. But I can do a full update with the system updates app. Does anyone have a link for the complete C47 update no the incremental update.
Any help will be greatly appreciated.
PS: Indian version
Click to expand...
Click to collapse
You will never be able to do an incremental update on a rooted phone.
mrironsights said:
Hey guys, im not able to do incremental updates on my rooted OP9Pro. But I can do a full update with the system updates app. Does anyone have a link for the complete C47 update no the incremental update.
Any help will be greatly appreciated.
PS: Indian version
Click to expand...
Click to collapse
Heyy if you rooted your phone with magisk and no twrp the below options will work and I'm using the same.
Incremental OTA with root:
1. Open magisk manager
2. Click Uninstall Magisk, then select Restore Images (Do not do a complete uninstall) and wait for it to finish
3. Do NOT reboot
4. Navigate to settings, and check for updates
5. Download and install the update as you would normally (It will download the incremental update, not the full 2GB+ file, saving you a lot of bandwidth)
6. Once done, open up magisk WITHOUT REBOOTING
7. Tap the install button, and select the 4th option (Install to inactive slot), once done, your device will reboot and you will be on the new OTA, with root, preserving your magisk modules if you have any.
Full Zip
First disable magisk modules
Restart
Download update and let it install
Then go to magisk
Install to inactive slot in magisk
Reboot
He
kullurumanoj said:
Heyy if you rooted your phone with magisk and no twrp the below options will work and I'm using the same.
Incremental OTA with root:
1. Open magisk manager
2. Click Uninstall Magisk, then select Restore Images (Do not do a complete uninstall) and wait for it to finish
3. Do NOT reboot
4. Navigate to settings, and check for updates
5. Download and install the update as you would normally (It will download the incremental update, not the full 2GB+ file, saving you a lot of bandwidth)
6. Once done, open up magisk WITHOUT REBOOTING
7. Tap the install button, and select the 4th option (Install to inactive slot), once done, your device will reboot and you will be on the new OTA, with root, preserving your magisk modules if you have any.
Full Zip
First disable magisk modules
Restart
Download update and let it install
Then go to magisk
Install to inactive slot in magisk
Reboot
Click to expand...
Click to collapse
kullurumanoj said:
Heyy if you rooted your phone with magisk and no twrp the below options will work and I'm using the same.
Incremental OTA with root:
1. Open magisk manager
2. Click Uninstall Magisk, then select Restore Images (Do not do a complete uninstall) and wait for it to finish
3. Do NOT reboot
4. Navigate to settings, and check for updates
5. Download and install the update as you would normally (It will download the incremental update, not the full 2GB+ file, saving you a lot of bandwidth)
6. Once done, open up magisk WITHOUT REBOOTING
7. Tap the install button, and select the 4th option (Install to inactive slot), once done, your device will reboot and you will be on the new OTA, with root, preserving your magisk modules if you have any.
Full Zip
First disable magisk modules
Restart
Download update and let it install
Then go to magisk
Install to inactive slot in magisk
Reboot
Click to expand...
Click to collapse
Thanks for the reply bro. I am aware of these methods. But somewhere down the line I f'ed uo and magisk doesnt have the original boot image, so I am forced to do the second method you described. I just need the full ZIP for C47. Please share if you have it. Is the ROM for global version same as the Indian version?
I have no link. But you'll find the full zip with the oxygen updater app
Hello all,
Has anyone installed the C47 update on 9pro... How is the phone behaving post install.. I am on A11 (all stock) and want to update to A12 but my previous experience with C44 was so bad that I downgraded. I understand that never stable releases have been provided any one care to provide a feedback on how the phone is behaving with the latest C47 update?
mrironsights said:
He
Thanks for the reply bro. I am aware of these methods. But somewhere down the line I f'ed uo and magisk doesnt have the original boot image, so I am forced to do the second method you described. I just need the full ZIP for C47. Please share if you have it. Is the ROM for global version same as the Indian version?
Click to expand...
Click to collapse
I had the same problem with no backup image. Reinstall the full zip for c.44, then go to step 6 in the instructions. Reboot, then you can repeat steps 2-7 with the incremental OTA
K1nsey6 said:
I had the same problem with no backup image. Reinstall the full zip for c.44, then go to step 6 in the instructions. Reboot, then you can repeat steps 2-7 with the incremental OTA
Click to expand...
Click to collapse
Its very clever. Thanks for the workaround
Hi guys, I'm still on OOS 11 with Magisk, what's the best way to upgrade to C47?
vbljj said:
Hi guys, I'm still on OOS 11 with Magisk, what's the best way to upgrade to C47?
Click to expand...
Click to collapse
Update to the latest Stable 24.3 Magisk (or I prefer Canary). Reboot.
Open Magisk and Uninstall Magisk > Restore Images. Do NOT reboot.
Take system update. Do NOT reboot.
Open Magisk and install to inactive slot. Reboot.
Check for system updates again and repeat steps 2-4 if needed.
I'm guessing your phone will need to take the first OOS12 update first, then a second update to get to C47, but it may not.
Can I jump to this from 11 directly or do I need C44 first?
awsan said:
Can I jump to this from 11 directly or do I need C44 first?
Click to expand...
Click to collapse
You need C44.
I think you will need to install C44 first and then install C47.
Thanks a lot gents, have a great day.
Download link for European model LE2123, Thanks to
shadowstep​
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com

Categories

Resources