Related
Directions to setup wifi/data without captiveportal and with Afwall:
http://forum.xda-developers.com/showpost.php?p=62560397&postcount=3
March 3. New release.
1. LP 5.1.1 r.34
2. Up to day google/cm changes
3. Improved WIFI handling to cellular
4. M5 kernel with fixed sound
Download: http://forum.xda-developers.com/devdb/project/dl/?id=17183
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
February 15. Updated kernel to fix headphone sound.
Download: forum.xda-developers.com/attachment.php?attachmentid=3647315&d=1455549561
Unzip and flash in fastboot
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
]anuary 24: Rom updated to release 33
Warning: All my roms now include a custom script that executes on boot, not at init.d level, which comes much later, but at init.rc. This script disables internet access to prevent data leaking from android system during boot before init.d or your firewalls come in. After the phone is booted and Afwall starts, it resets iptable rules and you then have the internet. Afwall is a must if you care about your privacy and battery life. If you, however, are not going to use Afwall, then delete the following file: /system/etc/crashdod.sh and reboot.
1. Release 33
2. January security patches
3. Wakelock blocker added
4. Updated M5 kernel to include latest CM/Sony changes
Kernel Source: https://github.com/AOSP-Argon/android_kernel_sony_msm8974
Download: http://forum.xda-developers.com/devdb/project/dl/?id=16401
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
November 25. Updated M5 Kernel built with the latest Ubertc 5.2.1 Nov 21 edition. Also, Sony bootlogo image themed in a teal color, the Tesla way.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=15345
Unzip and flash. Or you can flash the image with Kernel Adiutor.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
November 22: New build. This is release 29 with Anti-Piracy features removed. Probably the final build. Enjoy.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=15314
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
November 1. New kernel. [/COLOR]
1. Enabled hardware based encryption mixed with software (you need to re-encrypt to have the feature),
2. Enabled hardware random number generation also mixed with software
3. Your WIFI will work regardless of whether you have old wifi binaries or new
4. I have not incorporated some CM/M5 commits, as they cause random reboots.
5. Some security improvements in init files: now adb won't really work if usb debugging is set to off. Before that even if debugging was off, kernel would still get adb root rights during boot, which is insecure
Dowonload: forum.xda-developers.com/attachment.php?attachmentid=3527276&stc=1&d=1446392027
Sources for kernel: https://github.com/HonamiZ1/android_kernel_sony_msm8974
Instructions:
1. This boot.img does not have TWRP, so use Fota recovery image from my thread here http://forum.xda-developers.com/xperia-z1/orig-development/twrp-2-8-7-fota-partition-brightness-t3237229
2. Unzip boot.img and flash in fastboot: fastboot flash boot boot.img
3. To install TWRP 2.8.7 in Fota or Recovery (depending on whether you have upgraded your bootloader or not) do this also in fastboot: fastboot flash recovery recovery.img
4. Reboot. Now, you will have TWRP independent from kernel
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
This is Tesla-Redux resurrected by me. As you know, the latest official build does not recognize simcard, virtually turning your phone in a wifi device. Moreover, rhine devices are no longer officially supported and the honami thread itself is closed. Well, I fixed the simcard issue and built the rom from the latest sources.
Features include: SlimPie, RRO Layers, Customizable QS Tiles, SlimRecents, Slim's Power Menu, Slim's Nav bar, Hardware keys configuration, Animation Control, App Circle Sidebar, Lockscreen Weather, Screenrecorder settings, Kernel Aduitor built in plus more. My usual hardened features include hardened kernel (modified M5) plus removed nefarious IPs pooped by Google all over the source; full network choice in Cell menu; background wifi scanning is disabled for privacy and battery sake; cell network is handled by Android, as opposed to the modem; Volte provisioned; TWRP 2.8.7 in boot image, and much more...
This rom does NOT include the latest CM power scheme change, which causes random reboots and other issues. It is neither in this rom nor in my DU or Jaguar rom. The original power scheme was fine, no bugs, nothing to fix. So, why fix it, especially, that CM and Sony folks are incorporating 5-10 year old changes just now. I am not blaming Sony kernel developers, as they are not given the latest Sony blobs that are used in stock. So, as a result, they are working like kittens in the dark trying to bridge kernel with android and hardware. The same applies to the latest kernel commits including wifi. Prima driver worked fine in my latest Jaguar/DU builds, there were no WIFI issues. Moreover, the latest M5 changes cause multiple errors during build, so, kernel in this rom is stable as of October 8 or 9. This is the best you can get, as I doubt anyone will be paying any attention to lollipop any longer. .
Usual XDA warning: if your device dies or kills everybody in the vicinity, blame Putin, but I don't recommend it, since Russians mean business nowadays.
Instructions:
1. Unlocked bootloader, root and TWRP recovery
2. Wipe everything including internal SD card
3. Flash the rom, reboot and enjoy
Credit: Tesla Team, Slimroms and CM
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14909
Kernel Sources: https://github.com/AOSP-Jaguar/android_kernel_sony_msm8974
XDA:DevDB Information
TESLA-REDUX-RESURRECTED, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/tesla-redux
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP,Slimroms,CM
Version Information
Status: Stable
Stable Release Date: 2015-10-26
Created 2015-10-26
Last Updated 2016-03-03
Reserved
Mine
optimumpro said:
This is Tesla-Redux resurrected by me. As you know, the latest official build does not recognize simcard, virtually turning your phone in a wifi device. Moreover, rhine devices are no longer officially supported and the honami thread itself is closed. Well, I fixed the simcard issue and built the rom from the latest sources.
Features include: SlimPie, RRO Layers, Custimizable QS Tiles, SlimRecents, Slim's Power Menu, Slim's Nav bar, Hardware keys configuration, Animation Control, App Circle Sidebar, Lockscreen Weather, Screenrecorder settings, Kernel Aduitor built in plus more. My usual hardened features include hardened kernel (modified M5) plus removing nefarious IPs pooped by Google all over the source; full network choice in Cell menu; background wifi scanning is disabled for privacy and battery sake; cell network is handled by Android, as opposed to the modem; Volte provisioned; TWRP 2.8.7 in boot image, and much more...
Usual XDA warning: if your device dies or kills everybody in the vicinity, blame Putin, but I don't recommend it, since Russians mean business nowadays.
Instructions:
1. Unlocked bootloader, root and TWRP recovery
2. Wipe everything including internal SD card
3. Flash the rom, reboot and enjoy
Credit: Tesla Team, Slimroms and CM
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14909
Kernel Sources: https://github.com/AOSP-Jaguar/android_kernel_sony_msm8974
XDA:DevDB Information
TESLA-REDUX-RESURRECTED, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/tesla-redux
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP,Slimroms,CM
Version Information
Status: Stable
Stable Release Date: 2015-10-26
Created 2015-10-26
Last Updated 2015-10-26
Click to expand...
Click to collapse
Ready 2 test but will it work on C6902? Its Modem?
happy3777 said:
Ready 2 test but will it work on C6902? Its Modem?
Click to expand...
Click to collapse
Just flash C6902 modem on top: it is not a big deal...
You sir are a legend... Can't figure which one to use, Tesla or Jaguar Right now I'm on Tesla, testing stuff
Quick update, since GZR does not support our devices for some time now, they probably did not include the patch for headphones... would you mind to include it? I'm pretty sure that that bug is not present in Jaguar or DU
THANK TOU!
caki25 said:
You sir are a legend... Can't figure which one to use, Tesla or Jaguar Right now I'm on Tesla, testing stuff
Click to expand...
Click to collapse
Thank you. I am now on Tesla and it is hard to say which one is better. Jaguar is a little lighter, though. but Tesla guys have changed some animation timing, so, even if you turn off animation in developer section completely, it still feels a little different. I think Jaguar is lighter and a little faster, but Tesla feels smoother...
Does this and the jaguar ROM have the random reboot problems that Resurrection Remix is having?
Thanks.
YaqubYahya said:
Does this and the jaguar ROM have the random reboot problems that Resurrection Remix is having?
Thanks.
Click to expand...
Click to collapse
Not at all. Read the OP regarding random reboots on other roms...
optimumpro said:
Not at all. Read the OP regarding random reboots on other roms...
Click to expand...
Click to collapse
Oooooh, I'll most likely switch over tomorrow, which ROM do you recommend? Jaguar or Tesla?
Thanks for your great work!
optimumpro said:
Just flash C6902 modem on top: it is not a big deal...
Click to expand...
Click to collapse
Modem Zip never forked for me
Only cm12.1 is working for me without modem,
Either I always get a broken wifi on using modem
:crying:
happy3777 said:
Modem Zip never forked for me
Only cm12.1 is working for me without modem,
Either I always get a broken wifi on using modem
:crying:
Click to expand...
Click to collapse
You sure you used the correct one? http://forum.xda-developers.com/showthread.php?t=2614645
Works for others...
Hi, loving the rom! However is there any way of changing how curved the edges of everything is? I really don't like it, thanks.
YaqubYahya said:
Hi, loving the rom! However is there any way of changing how curved the edges of everything is? I really don't like it, thanks.
Click to expand...
Click to collapse
Have you changed screen resolution at all?
I don't know. I only start to see screen irregularities after 3-4 glasses of red wine.
optimumpro said:
You sure you used the correct one? http://forum.xda-developers.com/showthread.php?t=2614645
Works for others...
Click to expand...
Click to collapse
Ok I will try it today and report it 2 U
Thanx
How is the battery life on this ROM? That's my main prblm
optimumpro said:
Have you changed screen resolution at all?
I don't know. I only start to see screen irregularities after 3-4 glasses of red wine.
Click to expand...
Click to collapse
I think he's referring to the rounded corners of the notifications and the recent apps.
OT: I personally like it
What is the differentiating feature of this..
New kernel. See OP for description
optimumpro said:
New kernel. See OP for description
Click to expand...
Click to collapse
Can I flash this via twrp?
Ohhdayumm said:
Can I flash this via twrp?
Click to expand...
Click to collapse
No, it's a boot.img, so, you'll need a laptop...
SUPPORT FOR THIS HAS BEEN DISCONTINUED
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Unlock Bootloader!
Download the zip(s).
Install Appropriate FW base (STOCK MM 4.21.40.xx base is required) simple FW update package is available at my download link
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash LineageOS.
Optional: Install the Google Apps addon package. Open Gapps x86 7.1
Optional: Install the addon SU zip (x86 version)
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
[*] Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Polaris Office, Chase Mobile, Showbox...
[*] Screen recording not working Works now.
Chromecast screen mirroring not working, native casting works though.
[*] factory reset from setting menu has been reported to cause recovery boot loops. Works now.
CM14 (not device specific issues)
No CMTE yet
CM file manager has trouble accessing external sdcard
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
DOWNLOADS.LINEAGEOS.ORG
Recovery Links
Z00A
MM BL compatible TWRP: TWRP
Z008
MM BL compatible TWRP: TWRP
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps.
SU addon:
Flashable SU addon/removal
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
LineageOS 14.1 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer, say99
Source Code: https://github.com/LineageOS/android_kernel_asus_moorefield
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 4.21.40.xxx stock base
Version Information
Status: Nightly
Beta Release Date: 2016-11-09
Created 2017-01-27
Last Updated 2018-01-28
Reserved
DATA MIGRATION BUILDS
"THESE BUILDS WILL TAKE A LONG TIME (~30 mins) TO BOOT"
LineageOS has moved to private key signed builds. This is something that typically requires a full data wipe to transition too. To ease this burden for users who are not accustomed to that , the initial release builds are designed "MIGRATION" to help users who do not want to clean flash from an existing CM/Lineage build. Use the data migration builds as a one time "Flash this first, and then the officials" to migrate to private key signed builds. Follow the below instructions using the admiration builds to preserve app data if so desired, Otherwise feel free to clean flash directly to the weekly release builds
Official CM-13.0 -> CM14.1 Upgrade Guide
As seen with my previous unofficial CM-13.0 builds based on the MM Stock roms, An upgrade to the MM Firmware and bootloader is required going forward.
This guide is here to assist.
1) Download ROM and 7.1 GAPPS
2) Download my Firmware Update package for Z00A or Z008 . FASTBOOT AND ADB ARE REQUIRED!
3) Follow the included instructions to update Firmware and flash the new compatible TWRP. If for some reason the new TWRP is not flashed automatically flash it manually via fastboot. "fastboot flash recovery recoverimagename.img
4) Reboot to recovery and flash CM 14 and Gapps, reboot and enjoy. Data Wipe on upgrade is not required
CM 14.1 from Stock MM
1) Unlock Bootloader
2) Flash compatible TWRP
3) Perform desired backups
4) From recovery, factory reset & install ROM & 7.1 GAPPS
5) Enjoy!
CM 14.1 from CM13 Mm based beta builds
1) Reboot to TWRP( should already have good version)
2) Flash CM14.1 and 7.1 GAPPS
3) Reboot and enjoy!!
Reserve !
---------- Post added at 09:28 AM ---------- Previous post was at 09:14 AM ----------
I've just want to verify
to flash lineageOs
Its required Mm bootloader.
Is it required to flash also the firmware of Mm or just the bootloader and twrp !
Flashed migration build just fine. Didn't take too long. Flashing nightly now!
Thanks for big work. We love this rom, LinOS ???
Finally here!!!! Great job guys I'm glad you didn't give up through everything <3
jrior001 said:
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Polaris Office, Chase Mobile, Showbox...
DRM content is currently broken
Live Display (color calibration) not working yet
Screen recording not working
Chromecast screen mirroring not working, native casting works though.
factory reset from setting menu has been reported to cause recovery boot loops.
Battery life is horrible, numerous display wakelock issues
CM14 (not device specific issues)
No CMTE yet
Status bar icon changing broken
CM file manager has trouble accessing external sdcard
Battery profile is non functional/string errors
Click to expand...
Click to collapse
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
beibyboy06 said:
Reserve !
---------- Post added at 09:28 AM ---------- Previous post was at 09:14 AM ----------
I've just want to verify
to flash lineageOs
Its required Mm bootloader.
Is it required to flash also the firmware of Mm or just the bootloader and twrp !
Click to expand...
Click to collapse
no... just upgrade your bootloader to MM, download and flash
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
PedroCaseiro said:
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
Click to expand...
Click to collapse
give them time bro.... First nightly is up just now... chill
Why the zip on the lineageOS download page are not signed ? I need to disable the verification to install it in TWRP...
PedroCaseiro said:
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
Click to expand...
Click to collapse
Provably a few of those I can clean up, was just quick copy/pasta from the other thread
Sent from my ASUS_Z008 using Tapatalk
persieghini said:
no... just upgrade your bootloader to MM, download and flash
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
give them time bro.... First nightly is up just now... chill
Click to expand...
Click to collapse
Ok btw can I upgrade my lollipop bootloader to MM via twrp
And also should I unroot and uninstall xposed?
cedric1997 said:
Why the zip on the lineageOS download page are not signed ? I need to disable the verification to install it in TWRP...
Click to expand...
Click to collapse
The builds are signed, its your twrp that's not signed with the same private key(and never will be) that keeps you from using that sig verification.
Sent from my ASUS_Z008 using Tapatalk
jrior001 said:
Provably a few of those I can clean up, was just quick copy/pasta from the other thread
Sent from my ASUS_Z008 using Tapatalk
Click to expand...
Click to collapse
Is the battery life really horrible? Is it worse than the MM blobs CM 13? Anyways, thanks for continuing to develop this great ROM.
How can I enable also G-Assistant and G-Now on LinOS
crisvincent said:
Is the battery life really horrible? Is it worse than the MM blobs CM 13? Anyways, thanks for continuing to develop this great ROM.
Click to expand...
Click to collapse
No, it's actually been much better recently. I cleaned up a couple of the issues that were causing inconsistent wakelock issues a week or so ago.
Sent from my ASUS_Z008 using Tapatalk
jrior001 said:
No, it's actually been much better recently. I cleaned up a couple of the issues that were causing inconsistent wakelock issues a week or so ago.
Sent from my ASUS_Z008 using Tapatalk
Click to expand...
Click to collapse
Can confirm, I noticed my battery get much better recently before realizing you had updated that. I still have an issue with losing fast/quick charge, but I haven't seen others mention this so it's likely an issue on my end.
New nightly rom is amazing.... Thanks a lot guys @jrior001
---------- Post added at 04:11 AM ---------- Previous post was at 04:07 AM ----------
beibyboy06 said:
Ok btw can I upgrade my lollipop bootloader to MM via twrp
And also should I unroot and uninstall xposed?
Click to expand...
Click to collapse
No you can't do it with twrp... You need adb(comp) and unrooting is not necessary... Uninstalling xposed is also not necessary... It won't work in nougat.. It'll just be there
Can i use SuperSU instead of the official root?
Wow , I know I've just done a clean install of the nightly ....but , is it just me or is this a lot faster , more fluent browsing the web pages than anything built in the past ? Or am I slightly delirious thru watching all that blue building up coff ?
Hats off to the new age lineage and the master dev
Just moved to the official branch. Migration tool worked perfectly, and SU optional package did its job as well.
The whole process was absolutely painless, so let's enjoy OTA updates from now on!
Hey there,
good news for everyone who is missing the great JDC Nougat!
With smeroni68's authorization I'm offering you the latest version of the ROM, built from source, with some changes to keeping it up to date and maintained.
These changes are:
Latest security bulletins and changes from AOSPKernel upstreams from Linux StableUpdates from Code Aurora Forum (CAF)Some smallish modifications of standard apps or behavior
All credit goes to the JDC team!
(Check attachment for a list of team members).
They are the geniuses behind this awesome ROM and kernel, and I'm only making basic and minor modifications to it.
Besides a huge thanks to each member of the JDC team, thanks to Google, Lineage, Linux, CAF, Github & everyone else involved!
And many thanks also to DennySPB who helped me a lot with all the building stuff!
Have fun and enjoy!
Downloads
ROM / Kernel
Hashes
Recommended firmware
Last and latest Oreo firmware for our Mi 5:
8.11.22
ROM installation
Install latest TWRP
Make backups and store them externally
Wipe dalvik, cache, system, vendor, data
When coming from any android version other than Nougat 7.1.2:
Make external backups of your internal storage content
Format data (type "yes" way)
Reboot to recovery to access the data partition correctly again
Flash adequate firmware
No reboot in between the following and the optional steps
Flash ROM
Optionally:
Flash Gapps for 7.1.x arm64. I recommend OpenGapps Pico with additions (1) OR Stock with gapps-config.txt file (2):
(1) Flash Gapps additions (for example these by @Deltadroid)
(2) Check post_#128
Flash ThemeReady GApps package for Nougat arm64 (I don't)
Flash root (Latest Magisk is working fine for me)
After the first boot
Follow the gapps assistant (in case you installed gapps)
Wait 2 - 5 minutes to let everything settle in
Reboot to system
Kernel installation
You'll only wanna install the kernel separately when there's a kernel-only update later than the last ROM version!
Wipe dalvik and cache
Flash the kernel zip-file
Optionally: Re-flash root (if you were rooted before or now wanna be rooted)
GPL
All repos are forked from AOSP-JF-MM or LineageOS
Device tree source code:
https://github.com/PhilSmith31/platform_device_xiaomi_gemini/tree/aosp-7.1.2_r36
Kernel source code:
https://github.com/PhilSmith31/platform_kernel_xiaomi_msm8996/tree/bb
XDA:DevDB Information
AOSP, ROM for the Xiaomi Mi 5
Contributors
Phil_Smith
Source Code: https://github.com/PhilSmith31
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.1.18
Based On: AOSP
Version Information
Status: Stable
Created 2018-08-28
Last Updated 2020-03-20
Changelogs
20.03.2020
March 2020 security updates from LineageOS
Synced Lineage repos
Kernel is up to date with relevant commits to android/common
02.03.2020
Security bulletins up to Februrary 2020 (no more source.android updates coming from here on)
Updated everything in aosp.xml to latest android tag r39
Updated HALs and all externals under CAF to tag LA.UM.5.5.c25-04600-8x96.0
Upstreamed kernel with all changes to android/common up to date
Merged LA.UM.5.5.c25-04600-8x96.0 into qcacld-2.0
Synced Lineage repos
Kicked opencv
Kernel compiled with latest Linaro toolchain 7.5.0
17.09.2019
ROM:
Security updates from August and September 2019
Merged in CAF tag LA.UM.5.5.c25-03100-8x96.0 into externals, hals, and some vendors
Synced system/gatekeeper with LOS
Kernel:
B--B-Kernel-N-[2019-09-17]-[20:17]-Mi5
From now on always also present in kernel_only folder
Cherry-picked all relevant aosp's kernel/common/android-3.18 commits up to date
Merged in security related changes from aosp
Merged CAF tag LA.UM.5.5.c25-03100-8x96.0 into qcacld-2.0
Wrote simple python script to filter out warnings from compile output
Check extract_warnings.py and changes to build_kernel.sh
Vendor/aosp:
Monitor changelog under Dropbox link only
all changelogs
.
FAQ
I'm having general problems with the ROM installation or don't know what steps to perform to move from x to y or to restore or undo z. What shall I do, Dr. Phil?
Dr. Dr. Phil said:
First read the intro and then see whether your problem is covered here:
Standard Installation Types
Still issues? Then feel free to post in this thread!
Click to expand...
Click to collapse
Gcam mod has green lines in portrait mode or even in general
Dr. Dr. Phil said:
Settings -> advanced -> Fix Camera API2 -> support level override
and set it to "Zsl reprocessing"
Click to expand...
Click to collapse
Gcam mod video recording is force closing all the time.
Dr. Dr. Phil said:
This problem is present in Arnova's cam versions > 8, while photo shooting is working fine with the support level override fix above. You could use stock camera for video recording or use Arnova's gcam mod in versions 7.9 till 8.
Click to expand...
Click to collapse
Proximity sensor lets the screen get black while making a phone call
Dr. Dr. Phil said:
Use the recommended firmware (Oreo 8.11.22).
If that doesn't help, here is a fix that I used once successfully when I had the same problem.
Thanks to Mi5 Arsenal!:
flash zcx twrp
make a backup of your persist partition (let's call that x)
store x externally in case the fix shouldn't work or make anything worse (which I don't believe, but still)
download this zip file and place it where x had been stored (replace x with it)
hit restore in twrp, and select the new backup file you just put in place where x was
reboot to system
You can switch to official twrp afterwards without any problem!
Click to expand...
Click to collapse
Xposed isn't working or producing issues, what to do?
Dr. Dr. Phil said:
In my experience, xposed is very powerful, but can produce all kinds of weird and untraceable behaviour.
I don't recommend using it if not completely nessecary, and cannot support it.
Click to expand...
Click to collapse
Reserved
Hi mate... thanks for your dedication on our work!
Inviato dal mio Xiaomi Mi5 utilizzando Tapatalk
This is exactly what I was looking for N Rom with latest patches:laugh: .Ty so much for your work, will try it soon. :laugh:
What is for boot.img?
XxFatiHxX said:
What is for boot.img?
Click to expand...
Click to collapse
Just so you could flash back stock kernel separately.
Nothing you need for the ROM installation.
Thanks for this great work! Can I dirty flash it on latest original JDC nougat? And can I flash B-B Kernel or better not to do this?
ERRORR2 said:
Thanks for this great work! Can I dirty flash it on latest original JDC nougat? And can I flash B-B Kernel or better not to do this?
Click to expand...
Click to collapse
You should be able to dirty flash, although I think that a clean flash is advisable.
B-B-kernel should be working, but keep in mind that I am gonna keep updating the stock kernel and the B-B one is getting more and more outdated.
Edit:
This info is outdated!
B--B-kernel is even built into the ROM now!
The ol' but gold rom has waken up from long sleep
This rom is eas or hmp ?
Kyru said:
This rom is eas or hmp ?
Click to expand...
Click to collapse
EAS
Phil_Smith said:
EAS
Click to expand...
Click to collapse
Will it work with latest beta firmware ?
Will try soon
Kyru said:
Will it work with latest beta firmware ?
Click to expand...
Click to collapse
I would suggest Nougat-based firmware, but maybe on Oreo-based everything is working as well - can't say.
You need to try that out (on your own risk).
Thanks very much @Phil_Smith
Finally.. must try this one.. thanks @Phil_Smith
I can't believe this is perfect.
Can you add more status bar customizations?
Does alarm from switched off work with this rom?
Inviato dal mio MI 5 utilizzando Tapatalk
Official Telegram link: https://t.me/jaguar_Rom_Official
This is Jaguar Pie, a continuation of Jaguar Oreo. The project aims at hardening of Android and Linux kernel + performance. In addition to all familiar Pie features, Jaguar has:
1. Hardened bionic (which is responsible for C+/C++ portions of Android)
2. Hardened kernel (many features ported from 4.14 kernel)
3. Selinux replaced with Yama security
4. Various features, such as Alarm blocking and Wakelock blocker
5. Pie and Circle launchers
6. Force-encrypt FBE, as well as FDE options (starting from V2)
7. Various options from the top down starting from Status bar to Navigation bar.
8. Gestures, etc.
9. Fully working native call recording
10. Lawnchair Pie home
11. Omni theme engine
12. Kernel is based on Krieg with lots of security commits from Linux Hardened project
13. Overclocked big and little (in performance profile only)
14. Most runtime processes made read-only both in bionic and kernel
15. MicroG support
16. Qcomm's boost framework fully working (includes the fixed Qperformance blob)
and more...
Requirements: Unlocked bootloader, 9.0.2 firmware and TWRP capable of mounting/writing Vendor partition
Instructions: Detailed instructions are in post #3 together with future releases
Download Rom V-1 release: https://androidfilehost.com/?fid=11410963190603914968
Kernel Source EAS: https://github.com/AOSPME/JaguarPie-Kernel-for-Oneplus-5-5T
Kernel Source non EAS: https://github.com/optimumpr/android_kernel_oneplus_msm8998-1
Credits: AOSP, DU, OMNI, BENZO, LINEAGE, CARBON, XTENDED and everybody who contributed to Kernel (all listed in the link)
Also credit to @deletescape for Lawnchair V2
Screenshots:
This is where you get updates
If anyone is interested in locking bootloader on this rom and getting rid of any warning messages, i.e., you will have a boot like on stock OEM rom, contact me via PM.
Android 9 offers FBE (file based encryption forced) by default. Jaguar offers FDE (full disk encryption - not forced) by default with FBE as an option. Therefore, there are 3 choices users face: No encryption; FBE; or FDE. Jaguar, as mentioned above, by default, offers 'FDE, which is not forced, which means, you boot un-encrypted, but later, you can encrypt within Settings. That means, if you want to stay un-encrypted or encrypt within Settings, you don't need any extra steps. So, I am going to scream below, so that hopefully this time most would understand:
1. If you want no encryption, NO EXTRA STEPS REQUIRED, JUST FLASH THE ROM!
2. If you want FDE, NO EXTRA STEPS REQUIRED, JUST FLASH THE ROM! YOU CAN ENCRYPT WITHIN SETTINGS LATER! THE SAME APPLIES, IF YOU WERE ENCRYPTED FDE ON ANOTHER PIE ROM! IN THIS CASE, JUST BOOT, AS YOU ARE ALREADY FDE ENCRYPTED!
3. If you want FBE or already encrypted FBE on another Pie rom, EXTRA STEP IS REQUIRED: FLASH MY 'FBE FORCE-ENCRYPT' ADDON RIGHT AFTER THE ROM AND BEFORE REBOOT. YOU WILL HAVE TO FLASH THAT ADDON EVERY TIME AFTER UPGRADING AND BEFORE REBOOTING! IF YOU DON'T, YOU WON'T BOOT, BECAUSE SYSTEM EXPECTS FDE, BUT YOU ARE ON FBE! That's all.
TWRP BACKUP: Never backup and never restore System or Vendor IMAGES, backup and restore partitions/drives only. I don't know why images are shown in TWRP at all. If you restore system or vendor image, you will soft brick your phone, which may require flashing stock in EDL mode. Also, if you are FBE encrypted, never touch any lockscreen.db files in /data/system/. If you do, you will screw encryption.
Flashing Instructions.
1. Dirty flashing means flashing the rom without wiping anything. Normally, you don't need to do anything else, as both Magisk and Gapps have survival addons.
2. Clean flash means: wiping System/Vendor/Data/Dalvik/Cache; flashing rom; flashing Gapps (optional) and rebooting; then back to TWRP to flash Magisk (also optional).
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
December 15. Rom updated:
1. Fixed data disappearing after reboot and associated with it SystemUI crashes: this required rebuilding of the entire rom
2. Kernel to 4.4.206
Dirty flash is fine. Otherwise, see instructions
Download rom V15.1: https://androidfilehost.com/?fid=4349826312261675033
December 5. New release, V15
1. December security patches
2. Pie r51
3. Kernel to 4.4.205
4. Many updates taken directly from Android Master gerrit
5. Shutdown time reduced to 1-2 seconds
6. Updated Bromite Webview and Lawnchair
Dirty flashing is fine on top of previous release, otherwise, clean flash/read instructions
Download rom V15: https://androidfilehost.com/?fid=4349826312261653214
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
November 12. New release, V14
1. Many updates taken directly from Google Android Gerrit, master branch - updated as of November 11
2. Improvements in framework/base; framework/ave; framework/native and vulkan drivers
3. Kernel updated to 4.4.200, which includes the latest implementation of Spectre V1 and V2 patches (upstreamed just a few days ago)
4. Night light tint is incorporated in the rom (no need to flash a separate attachment)
5. November security patches
Dirty flash is sufficient. Otherwise, clean flash - see instructions above.
Download Rom V14: https://androidfilehost.com/?fid=4349826312261627158
______________________________________________________________________________________________________________________
October 12. New release V13
October security patches + internal improvements + updated kernel
Dirty flashing is fine on top of the previous release. Otherwise, clean flash, see instructions above.
Download rom V13: https://androidfilehost.com/?fid=1899786940962606952
______________________________________________________________________________________________________________
September 18. New release V12
1. September security patches
2. Major changes in kernel and rom - significant battery saving
3. Smart charging
4. Choice of backgrounds in Reboot menu
5. Toggle to disable Home key while ringing
and more
Dirty flashing is fine, if on the previous release. Otherwise, clean flash, see instructions
Download rom V12: https://androidfilehost.com/?fid=1899786940962588878
August 10. Small partial update to fix fingerprint spam while in a pocket and feature enabled in settings. Flash in TWRP and reboot:
Download partial update (this is not a rom): https://forum.xda-developers.com/attachment.php?attachmentid=4803640&d=1565323520
August 7. New release V11.
1. August security patches
2. Google release 46
Dirty flashing is fine, if on the previous release. Otherwise, clean flash. In either case read instructions.
Download rom v11: https://androidfilehost.com/?fid=6006931924117931413
July 10. New release.
1. Latest Google sources
2. July security patches
3. Lawnchair updated. Now, you will be able to updated yourself
Dirty flash on top of the previous release is fine. Otherwise, read instructions above.
Download Rom: https://t.me/jaguar_Rom_Official/3
AFH link: https://androidfilehost.com/?fid=6006931924117913953
Also, see the original post for the official Jaguar Channel on Telegram.
June 9. Kernel update - brings back display color calibration missing after switching to non-EAS kernel.
Unzip and flash in TWRP as image to boot partition.
Download updated kernel: https://forum.xda-developers.com/attachment.php?attachmentid=4774096&d=1560094674
June 6. New release V9
1. June security patches
2. Google release 41
3. Oneplus camera replaced with Snap
4. Updated Lawnchair
Could be flashed dirty, if on a previous release. Otherwise, clean flash. Read instructions
Download rom V9: https://androidfilehost.com/?fid=6006931924117889650
-------------------------------------------------------------------------------------------------------------------------------------------
May 17. Release 8.
1. New non EAS kernel
2. Big changes in frameworks: exec spawning function is severely restricted to all apps, i.e., only one instance is allowed
3. Most resources preloading for exec spawning is disabled. As a result, boot time is shorter, fewer background resources are loaded in ram, which translates into an overall smoother experience.
4. MusicFX/Equalizer is now themeable (you need to re-apply your selected theme)
Instructions:
1. Dirty flash, if on a previous release. For all others:
2. Clean flash. Clean flash requires wiping system/data/vendor/cache/dalvik. Read general instructions at the top of this post re encryption. Flash the rom, flash
Gapps and reboot. Then back to TWRP and flash Magisk.
If after applying Magisk the phone is stuck on bootanimation for more than 2 minutes, force-reboot with the power button.
Download rom V8: https://androidfilehost.com/?fid=1395089523397967819
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
May 12: To fix randomly disappearing contacts, flash this and reboot: https://forum.xda-developers.com/attachment.php?attachmentid=4757815&d=1557687807
May 11. New release V7.1: Issue with touches fixed + updated Lawnchair with many fixes
1. May security patches
2. Android Pie r37
3. Aggressive battery saving
4. Status bar burning protection
5. Media cover art filter (on lockscreen)
6. Lots of changes in kernel
7. Switched to Bromite system webview V74
8. Redone auto-brightness and ambient display
9. Added additional screen calibration features in OneplusExtras
10. Could be used with Oneplus latest firmware 9.05
11. Lawnchair upgraded (many fixes)
12. Cache automatically cleaned on dirty flash
Instructions:
1. Dirty flash on top of V7 is fine
2. If you are coming from a rom encrypted with FBE, you can preserve that encryption (if you wish) by flashing my force-encrypt addon. If not, then proceed below
3. TWRP-Clean flash: format System/Vendor/Data/Cache. Flash the rom, Gapps (optional), reboot. After that back to TWRP to flash Magisk (optional)
Download rom V7.1: https://androidfilehost.com/?fid=1395089523397963842
__________________________________________________________________________________________________________________
April 13. Rom updated
1. Lawnchair V2 now has Pie recents
2. Upstream commits
Instructions: Dirty flash (with dalvik/cache wiping) for those on the previous release. Clean flash for all others (see instructions about encryption choice)
Download rom release V6.1: https://androidfilehost.com/?fid=1395089523397943691
April 2. New release, V6
AOD IS WORKING NOW
If you are on April 2 release, just flash dirty and wipe cache/dalvik. When enabling AlwaysOn the first time, just use power buton a few times, after that, AOD will work (confirmed). If on March release, flash clean.
1. April security patches
2. Android pie r35
3. Up time and CPU sleep time since reboot in About Phone
4. Updated kernel (upstream and other commits)
5. Many other improvements
Instructions: Clean flash is required for everybody. Those, who are encrypted FBE, need to flash one of 2 fbe addons from post #4 (doesn't matter which one). Others just need a clean flash.
Download rom v6:https://androidfilehost.com/?fid=1395089523397932686
March 14. New release, V5:
1. Boot time reduced to 4-5 seconds (after initial logo), as a result of
2. Rom no longer relies on background compilation
3. Speed/performance significantly increased. As a side effect, system image is larger now
4. Many performance improving changes in kernel (see github)
Instructions:
1. If you are on a previous release, you may flash dirty (just flash one of FBE addons, if you are FBE encrypted) + wipe cache/dalvik. The first boot will take longer
2. Clean flash (wipe system/data/vendor/cache/dalvik); flash the rom (if you are FBE encrypted, flash appropriate FBE addon); flash Gapps (optional) and reboot; then back to TWRP and flash Magisk (optional)
Download rom V5: https://androidfilehost.com/?fid=1395089523397916259
March 5: New release V4
1. March security patches
2. Android Pie release 34
3. About phone - Jaguar version
4. Settings/Battery - dash charging indication
5. Sim preferences now survive reboot (in multi-sim)
6. Set text_show_password to false by default
7. Lineage root implementation (for those who don't want Magisk)
8. Possible fix for 'green screen', when connected to smart tv (needs confirming)
9. DocumentsUI/File manager is replaced with Simple File Manager (from F-Droid)
Clean flash REQUIRED due to changes in Settings.apk. OTHERWISE, you will have mismatched entries
Instructions: Clean flash (wipe system/data/vendor/cache/dalvik); flash the rom (if you are FBE encrypted, flash appropriate FBE addon); flash Gapps (optional) and reboot; then back to TWRP and flash Magisk (optional)
Download rom v4: https://androidfilehost.com/?fid=1395089523397908036
February 19: New release V3
1. Toggle to enable/disable captive portal detection (Settings/Network & Internet/Wifi/Wifi preferences/Advanced)
2. Ambient brightness fixed (now follows regular brightness)
3. Attempted fix for MicroG
Instructions: This version requires clean flash for everybody, due to changes in Settings.apk. If you flash dirty, you will have entries in Settings mismatched. If you are coming from Oreo and encrypted, full factory reset in TWRP is required.
Download rom V3: https://androidfilehost.com/?fid=1395089523397896850
February 13: Minor rom update V2-1
Overview buttons options are back. No other changes.
Instructions are the same, as in V2 below. Dirty flashing is fine on top of previous release
Download rom V2-1 release: https://androidfilehost.com/?fid=1395089523397892116
February 11: Rom updated
THIS VERSION IS FDE - ENCRYPTION NOT FORCED by DEFAULT. I have also posted 2 encryption addons (post #4) for those who want FBE enforced or not enforced. In any case, there is no need for 'no_verity' patch any longer.
1. February security patches
2. Fixed non-booting without magisk
3. FDE encryption (as opposed to FBE) - you don't need to flash 'No_Verity'
Instructions for V2:
9.0.2 or 9.0.3 firmware
1. If you are encrypted on Oreo, you must do factory reset in TWRP where you type 'yes' to confirm. After that reboot in TWRP again
2. Wipe System/Data/InternalSD/Cache/Dalvik/Vendor
3. If you want to stay de-crypted with an option to encrypt FBE later on: flash the rom; flash 'fbe-no-forced-encryption; Flash Gapps and Reboot.
4. If you want FDE or no encryption, follow the previous step, but skip flashing addon.
5. Back to TWRP and flash Magisk 18 or 18.1
You are not encrypted by default in this version. You don't need 'no verity'. You can encrypt FDE within settings
Download rom V2 encryptable with FDE (not forced): https://androidfilehost.com/?fid=1395089523397890806
Encryption addons:
1. FBE forced encryption
2. FBE no forced encryption
Flash right after the rom (before reboot). You don't need 'no-verity'.
3 points.
1. Would you be releasing with Feb Patch when the patch comes in on Wednesday?
2. Just something about the thread name. [ROM] Jaguar Pie OnePlus 5 Official. That looks really better. Just a suggestion from one English freak like me.
3. Which TWRP did you use?
BTW, 1st one to comment. and download maybe.
vdbhb59 said:
2 points.
1. Would you be releasing with Feb Patch when the patch comes in on Wednesday?
2. Just something about the thread name. [ROM] Jaguar Pie OnePlus 5 Official. That looks really better. Just a suggestion from one English freak like me.
BTW, 1st one to comment. and download maybe.
Click to expand...
Click to collapse
The edit function, for some reason, doesn't change to capital letters. Nor does the Development Project section properly work.
There will be a release with February patches, but those won't be published on Wednesday. Trust me. Google rarely does those on time.
when do you support 5t？I want to use Jaguar.
optimumpro said:
The edit function, for some reason, doesn't change to capital letters. Nor does the Development Project section properly work.
There will be a release with February patches, but those won't be published on Wednesday. Trust me. Google rarely does those on time.
Click to expand...
Click to collapse
Recently XDA has gone crazy. Yeah Google is **** anyways. The patch will anyways be dated 05022019. Be it released whenever. https://source.android.com/security/bulletin
What TWRP did you use? Give the link if possible? Also, I really love this ROM. Why don't you join Telegram. I have a chat for Jaguar, and I give out your updates on my OP5/T Channel in Telegram.
---------- Post added at 22:41 ---------- Previous post was at 22:40 ----------
losigep said:
when do you support 5t？I want to use Jaguar.
Click to expand...
Click to collapse
5T has Oreo. Pie I too ask him, as there are many wanting to use it.
---------- Post added at 22:44 ---------- Previous post was at 22:41 ----------
One last thing for downloads..
Download Rom V-1 release: https://androidfilehost.com/?fid=11410963190603914968
Kernel Source: https://github.com/AOSPME/JaguarPie-...r-Oneplus-5-5T
Please do not give AFH, as it sucks. For most of us it takes around 1 hour and more to download and it can break off anytime. Whether one uses ADM or any fast download manager, PC, or whatever. The speed of AFH is usually 90KBPS or even less..
No decryption support??
I am decrypted and I would Ike to try this rom... Any possibility??
SREEPRAJAY said:
No decryption support??
I am decrypted and I would Ike to try this rom... Any possibility??
Click to expand...
Click to collapse
This ROM is all about Encryption in security side. Why do you want to force decryption on it? Also, suggestion, go Encrypted with Jaguar, you wont face any issues.
Although I am decrypted on Oreo with it. It has decryption support, right @optimumpro
---------- Post added at 23:19 ---------- Previous post was at 22:48 ----------
BTW, waiting patiently for FDE. ?
SREEPRAJAY said:
No decryption support??
I am decrypted and I would Ike to try this rom... Any possibility??
Click to expand...
Click to collapse
vdbhb59 said:
This ROM is all about Encryption in security side. Why do you want to force decryption on it? Also, suggestion, go Encrypted with Jaguar, you wont face any issues.
Although I am decrypted on Oreo with it. It has decryption support, right @optimumpro
Click to expand...
Click to collapse
You should simply flash the latest No-verity patch right after flashing the rom and before reboot. This way, you will stay un-encrypted.
losigep said:
when do you support 5t？I want to use Jaguar.
Click to expand...
Click to collapse
Jaguar Oreo had very few downloads on 5T thread. I guess people are not interested. If there is more interest, I will do Pie for 5T.
vdbhb59 said:
This ROM is all about Encryption in security side. Why do you want to force decryption on it? Also, suggestion, go Encrypted with Jaguar, you wont face any issues.
Although I am decrypted on Oreo with it. It has decryption support, right @optimumpro
---------- Post added at 23:19 ---------- Previous post was at 22:48 ----------
BTW, waiting patiently for FDE.
Click to expand...
Click to collapse
As I have stated before, my main problem with Pie is that Google has removed the ability to encrypt the phone via adb or terminal. This is important for FDE, because on pre-Pie, you could have separate passwords one longer for boot and another shorter for screenlock. Not anymore. To make things worse, both FBE and FDE are encrypted with literally the words 'default_password', which is hard-coded in system and TWRP. That's why you boot without a prompt. Later, you can change that to whatever you want. However, if your new password is removed, system defaults to effing 'default_password'. So, right now, if an adversary gets your encrypted phone, he can boot into TWRP, delete /data/system/lockscreen files and reboot the phone without a prompt. This obviously defeats the entire purpose of encryption, but kids (users) are happy and Mother (agencies) approve. .
I can fix that for myself by hard-coding a different password, but it is impossible to do for others...
By the way, I use Blue_Spark's TWRP, the one for September 2018 - works fine (including decryption) on both Oreo and Pie.
optimumpro said:
Jaguar Oreo had very few downloads on 5T thread. I guess people are not interested. If there is more interest, I will do Pie for 5T.
Click to expand...
Click to collapse
Ok.... I am using crdroid5.1 but it is have some issue，such as my app always ANR.long time ago I have used Jaguar for 2 months.but I have been waiting for a long time, but it has not been updated.
Does Jaguar 9.0 support AOD?
Also - what is the process for updating from Jaguar Oreo? What TWRP version do you suggest?
Binary Assault said:
Does Jaguar 9.0 support AOD?
Also - what is the process for updating from Jaguar Oreo? What TWRP version do you suggest?
Click to expand...
Click to collapse
I am using Blue Spark TWRP dated September 2018 and it works for both Oreo and Pie. The rest is in instructions. Read about encryption: basically, if you are encrypted in Oreo, or in PIE FDE, you have to do full factory reset (in TWRP), which will erase encryption and both data and SD card. If not encrypted, then just do a clean flash. No need to wipe internal SD card. You will also need to flash 9.0.2 firmware.
Finally Pie Build! Thx
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
Is this rom mainly focused on Security? What about performance? I mainly do gaming on my phone. So performance is what i need. The name "Jaguar" has made me curious! ?
ShiShTuBaBu said:
Is this rom mainly focused on Security? What about performance? I mainly do gaming on my phone. So performance is what i need. The name "Jaguar" has made me curious! ?
Click to expand...
Click to collapse
It is both. So go ahead blindly and play as many games as possible. ?
optimumpro said:
You should simply flash the latest No-verity patch right after flashing the rom and before reboot. This way, you will stay un-encrypted.
Click to expand...
Click to collapse
Like all the Roms on the other hand ...
I do not understand the above statement
Here is Jaguar Pie. In addition to familiar Pie features (all of them), you have:
Official Telegram Link: https://t.me/jaguar_Rom_Official
The main thing: Non-treble! So, your vendor is located in system partition, which is NOT available to the entire world, like in treble roms.
1. Hardened/fortified bionic (over 150 commits) to prevent bad behavior by system and third party apps
2. Most runtime processes are read only, which means they can't be exploited to take over the device. I am trying to attack the cause, rather than the symptoms (a specific exploit)
3. Many kernel security features activated, such as 'configuration_integrity', randomization; hardened user copy, etc. Impulse governor added
4. Yama security in kernel
5. Working msm hotplug, which actually plugs/unplugs CPU based on load
6. Wakelock blocker, Alarm blocker etc
7. Gestures, Omni Theming
8. Smart pixels
9. Offline charging
10. Utouch
11. AOD
12. No response to 'type zero' SMS
13. Boot time on a fully settled rom is about 4-5 seconds after Zuk logo
14. Qualcomm's boost framework
Many more features, which I am tired to list.
This is beta, because I don't have the device - relied on @Dr.07 @The.Night.King and @benedict97 - thanks for testing
INSTRUCTIONS:
1. Format System/Vendor (if you have it)/Data/Dalvik/Cache. If you are encrypted in Oreo or encrypted with FBE, you also need a format with factory reset to get rid of encryption. ALSO: FORMAT FACTORY partition, otherwise, you will have 2 sets of vendor blobs, which would create a mess on boot
2. Flash the rom, flash Gapps, reboot and let the rom run, then
3. Back to TWRP to flash Magisk (18.1 is working)
Rom download V1: https://forum.xda-developers.com/devdb/project/dl/?id=31427
This is the initial release. All future updates will be in post #3, as usual.
Credit: MrHacker (I used his device tree as a base) and many others who work on device tree and kernel and obviously AOSP, OMNI, DU, CopperheadOS, Carbon Rom, Xtended and Benzo
Also, credit for a Jaguar bootanimation to @Ashish9 and @The.Night.King who made a logo and header icon
If anyone is interested in Afwall with administrative option restored (app can't be uninstalled, unless confirmed by you): https://forum.xda-developers.com/attachment.php?attachmentid=4739733&d=1554836212
XDA:DevDB Information
[ROM] JAGUAR PIE NON-TREBLE 3.18 KERNEL OFFICIAL, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
optimumpro
Source Code: https://github.com/optimumpr/kernel_zuk_msm8996
Sources for new (May 29) kernel: https://github.com/optimumpr/android_kernel_zuk_msm8996-1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.1.x
Based On: AOSP, DU, Lineage
Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2019-04-05
Created 2019-04-05
Last Updated 2019-08-07
Screenshots
Some screenshots:
Updates in this post
Those who are coming from treble roms: you need to format Factory partition too, otherwise, you will have 2 sets of vendor blobs, in other words, MESS
August 7. New release.
1. August security patches
2. Google r46
3. Camera should have level 3 now + more
Dirty flashing is fine, if on the previous release. Otherwise, clean flash - wipe Vendor/Factory/System/Data/Cache/Dalvik
Download rom V6: https://forum.xda-developers.com/devdb/project/dl/?id=31753
July 30: New release V5.2 with fixed installation problems:
You could try dirty flash, but I installed clean, then flashed Opengapps, and Firefox installed without any problems, while it didn't on V5.1.
Download rom V5.2: https://forum.xda-developers.com/devdb/project/dl/?id=31733
July 27. New release, v5.1.
This will fix encryption.
The reason it didn't work was the official TWRP. The maintainer (a known pro) put in the wrong size of userdata partition. So, if you ever formatted data on official TWRP, especially with factory reset, your data partition is screwed for the purposes of encryption (no place for crypto footer). I had to install another version of TWRP, and after I did format there, encryption worked. So, I am attaching both the rom and unofficial TWRP by handibuddy. This is also a signed version (as well as the rom itself), so you can re-lock bootloader on this rom: I have been doing this for ages and long before Lineage came up with the idea (you can check my signing guide in Oneplus 5 thread).
Download Rom V5.1: https://forum.xda-developers.com/devdb/project/dl/?id=31727
Download signed TWRP: https://forum.xda-developers.com/devdb/project/dl/?id=31728
Instructions: Rom could be flashed dirty over V5. TWRP could be flashed as image (to recovery) in your existing TWRP or via fastboot.
Just remember, if you want to relock bootloader, encrypt after locking.
July 25. New release, v5
1. July security patches
2. New Night Screen with configurable tint and brightness
3. Support for level 6-6.2 for AVC codecs
4. Option to disable proximity sensor during calls
5. In-CallUi is now themeable
6. Aggressive battery saving mode
7. Latest Lawnchair
Clean flash is required over V4 or if coming from a different rom, in which case you will also need to format vendor or factory partition.
DO NOT ENCRYPT YET!
Instructions:
1. Dirty flash, if already on Jaguar Pie
2. Clean flash, If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Download rom V5: https://forum.xda-developers.com/devdb/project/dl/?id=31725
________________________________________________________________________________________________________
June 6. New release, V4:
1. June security patches
2. Pie r41
Dirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
ps, reboot, then back to TWRP to flash Magisk
Download rom V4: https://forum.xda-developers.com/devdb/project/dl/?id=31621
______________________________________________________________________________________________________________________
June 2. Lawnchair update to the latest. Flash in TWRP.
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4770317&d=1559500522
May 31. Rom updated, V3:
1. Major kernel improvements - there is no reason to use my Oreo kernel or any other kernel
2. Flashlight works regardless of 'always on' or 'ambient display' (that required a clean flash)
Instructions:
1. Clean flash recommended - wipe system/data/cache/dalvik
2. If coming from a different rom, also format vendor/factory
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
Download rom V3: https://forum.xda-developers.com/devdb/project/dl/?id=31612
_____________________________________________________________________________________________________________________
May 30. This is an updated version of the new kernel I posted earlier. This one contains my commits + reversed 'power saving' commits. Sometimes, you get things better by reversing.
Unzip, put on internal SD and flash either with TWRP (as image onto boot partition) or via fastboot.
Download new kernel: https://forum.xda-developers.com/attachment.php?attachmentid=4768179&d=1559177914
May 28. Lawnchair update. Flash in recovery:
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4767269&d=1559060237
May 27. Updated release:
1. Fixed toggling flashlight in ambient display
2. Improvements in Qualcomm's boostframework
3. Contactsprovider updated (disappearing contacts)
Could be dirty flashed over V2. Otherwise, clean flash.
Download rom V2.1: https://forum.xda-developers.com/devdb/project/dl/?id=31602
May 25. New release, V2:
1. May security patches
2. Android Pie r37
3. Big changes in frameworks: exec spawning function is severely restricted to all apps, i.e., only one instance is allowed
4. Most resources preloading for exec spawning is disabled. As a result, boot time is shorter, fewer background resources are loaded in ram, which translates into an overall smoother experience.
5. Aggressive battery saving
6. Status bar burn protection
7. Media cover art filter (on lockscreen)
8. Switched to Bromite system webview V74
9. Redone auto-brightness and ambient display: ZukDoze removed, as Customdoze and Amibientdisplay are now builtin (Settings/Display)
10. Lawnchair upgraded: many fixes including Pie recents
11. MusicFX/Equalizer is now themeable
12. Zukparts removed, as spectrum profiles simply don't work, and KCAL could be done via Kernel Adiutor
13. Battery icon Q style
14. Wifi randomization working (Developer Settings)
15. Captive portal detection toggle (Settings/Wifi/Advanced - disable network connectivity check). You can now uninstall Captiveportal and have no 'x' in Wifi and Mobile icons
Instructions:
1. Clean flash required
2. Format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps or Nano Gaps, reboot. Then back to TWRP and flash Magisk
If your provider's APN is not on the list, set it up and enable. If data doesn't work, then change CDMA subscription in Mobile network to the alternative.
Download rom V2: https://forum.xda-developers.com/devdb/project/dl/?id=31591
__________________________________________________________________________________________________________________
April 9. New release. Lots of changes, mostly in kernel:
1. Inteli-thermal
2. Thermal-engine ported from Jaguar Oreo, so the rom runs about 3 degrees cooler
3. Substantially improved fluidity: according to testers, virtually no lag
Instructions:
1 If on a previous release, flash dirty and wipe dalvik/cache
2. if new, format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps, reboot. Then back to TWRP and flash Magisk
Download rom V1.1: https://forum.xda-developers.com/devdb/project/dl/?id=31467
_____________________________________________________________________________________________________________________
April 5. Here is the first update, kernel only. Speed improvement.
Just flash boot.img on top of the first release.
Download kernel: https://androidfilehost.com/?fid=1395089523397933955
Finally ?
@optimumpro Thank you. Respect?
Thanks for the work! ?
Woh!!!!...... Waiting for a detailed review by someone.....
Wow finally
vinay069 said:
Woh!!!!...... Waiting for a detailed review by someone.....
Click to expand...
Click to collapse
your prediction turned out pretty accurate about the release date lol
All right, boys and girls. First update: kernel only - speed improvement . Download (in post #3) and flash on top of the first release
Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?
GopalKaul said:
Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?
Click to expand...
Click to collapse
Screenshots posted. Stereo sound - not yet.
optimumpro said:
Screenshots posted. Stereo sound - not yet.
Click to expand...
Click to collapse
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?
Shubhi singhal said:
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?
Click to expand...
Click to collapse
Just flash rom
The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Kernel only.
venom0207 said:
Just flash rom
Click to expand...
Click to collapse
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
@optimumpro animations r fekked
Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
It is non treble, factory or vendor have nothing to do with it, you can straight away flash the rom
Flashed the ROM.
It took a lot of time to boot.
Swipe up home screen is not showing any options
Recents is not pie recents
Very fast ROM
In some themes, the notifications are invisible