Was checking system updates and found an update.
HermesHidayat said:
Was checking system updates and found an update.
Click to expand...
Click to collapse
Yup, was posted today on telegram group...
(WW)
FOTA (incremental update from 2004.60) ;
Rename to UL-ASUS_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
https://fota2.asus.com/delta_packag...2004.60-17.0240.2004.9-06061254-fota-user.zip
Full rom zip ;
https://dlcdnets.asus.com/pub/ASUS/...S_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
Raw rom ;
https://drive.google.com/file/d/1T0P8CDJLjPypRAS2HDpdUn8Z-M5tfzKc/view?usp=drivesdk
Stock boot img ;
stock2004.9
Root boot img ;
root2004.9
Place rom in root of storage and reboot. Once detected click to update. Reboot again to finish.
For those with root already and wishing to keep root, simply put the rom in root of storage, reboot and click to update when prompted. BUT, DON'T reboot yet when it finishes updating. Click 'later', go to magisk manager and choose 'install magisk'. When given the options for installing, select 'after OTA' (or words like that). Once magisk is installed again, select reboot. Root will be maintained. Saving the hassle of flashing the root img via fastboot.
-----------------------------------------
For those of you who are not yet rooted but would like to be using the boot img above, see below for guidance. NOTE: if something goes wrong, I am not responsible in any way!! Also, by unlocking bootloader (which is required for root), you will void your warranty.
Also note: you must update to latest 2004.9 rom from above links before starting this process. Should you wish to do this process another time with another update, you MUST ALWAYS match the root boot img for the same rom version you are using.
1. First you need to unlock the bootloader. Download and install the apk from link, then follow instructions. NOTE: doing this wipe the device. Do not power off the device or stop the process once started. I think the device will reboot a couple of times during the process, but ican't remember sorry... Just leave it to do its thing and once finished, proceed to step 2.
Get the bootloader unlock tool, which says in the description that it's compatible with android 10, from here. You'll find it under tools/utilities.
2. Download and install Minimal ADB and Fastboot app (windows). Install it on your PC/laptop to C drive
3. Download the root2004.9 boot img from above and move/save it to (C:\Program Files (x86)\Minimal ADB and Fastboot folder)
4. Switch the phone into fastboot mode (from device being in off/powered down, hold volume up then press and hold power button). Fastboot is the first screen you see with a scrollable menu giving some other options, don't select any options... just stay in that mode. Connect the phone to pc/laptop using the SIDE port of the phone. Navigate to C:\Program Files (x86)\Minimal ADB and Fastboot folder and double click the cmd-here.exe, this will open a cmd window.
5. (optional, but recommended) Once your phone is connected in fastboot mode and you have your cmd window open, type 'fastboot devices' in the cmd window. If your device is recognised then a key/serial will be displayed. Providing this is shown, proceed to step 6.
6. Next you are going to flash the root boot img (which, if you followed the instructions, should be in the Minimal ADB folder). In the cmd window type 'fastboot flash boot magisk_patched2004.9.img'. Once completed without errors, your device will now have a rooted boot img flashed. Yey!!
7. Now you can go ahead and unplug your device and boot it up. I did this months ago when I first got the phone, so you'll have to forgive me.... I can't remember if magisk manager is installed during the above process or if you have to install it manually after. If, when you have booted to system, there is no 'magisk manager' in your app drawer, you'll need to install yourself from here scroll about half way down the page and you'll see the downloads section. Go for the latest stable (currently 7.5.1).
8. Download a root checker app from playstore to verify you have root and you're done. If you need to resort back to original boot img, download it from above and follow the same process, but instead type 'fastboot flash boot boot2004.9.img'.
reg66 said:
Yup, was posted today on telegram group...
(WW)
FOTA (incremental update from 2004.60) ;
Rename to UL-ASUS_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
https://fota2.asus.com/delta_packag...2004.60-17.0240.2004.9-06061254-fota-user.zip
Full rom zip ;
https://dlcdnets.asus.com/pub/ASUS/...S_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
Stock boot img ;
stock2004.9
Root boot img ;
root2004.9
Place rom in root of storage and reboot. Once detected click to update. Reboot again to finish.
For those with root already and wishing to keep root, simply put the rom in root of storage, reboot and click to update when prompted. BUT, DON'T reboot yet when it finishes updating. Click 'later', go to magisk manager and choose 'install magisk'. When given the options for installing, select 'after OTA' (or words like that). Once magisk is installed again, select reboot. Root will be maintained. Saving the hassle of flashing the root img via fastboot.
Click to expand...
Click to collapse
bro,im not saying youre disturbing or whatsoever,you should make a detailed thread.unlike me im kinda dumb,i dont understand this Root boot img and so on. and making your own thread will allow more people will see your thread as i doubt many people will come to this thread to read...
Can anyone check to confirm whether heating is still on an issue on the new version?
HermesHidayat said:
bro,im not saying youre disturbing or whatsoever,you should make a detailed thread.unlike me im kinda dumb,i dont understand this Root boot img and so on. and making your own thread will allow more people will see your thread as i doubt many people will come to this thread to read...
Click to expand...
Click to collapse
Nah, should be fine here. People will still see the update in your title and click to view content. And for those that want root who are not already rooted I'll add some instructions in a while or tomorrow about how to use the boot img's (on my phone right now, it's easier if I do it on pc). Links and details are only the second post on the page so people will still see the info they need. So yeah, if it's OK with you I'll just leave the content here rather than starting another thread with the same title
---------- Post added at 03:36 AM ---------- Previous post was at 03:35 AM ----------
TikiThePug said:
Can anyone check to confirm whether heating is still on an issue on the new version?
Click to expand...
Click to collapse
I'd like to shed some light on this for you but I'm not a heavy gamer (I assume that's when the device gets hot mainly) and have never had any heating issues with any of the builds
TikiThePug said:
Can anyone check to confirm whether heating is still on an issue on the new version?
Click to expand...
Click to collapse
i dont play games anymore on my phone but the only time it hit 74 degrees was when i left my phone in my car under the sun...
reg66 said:
Nah, should be fine here. People will still see the update in your title and click to view content. And for those that want root who are not already rooted I'll add some instructions in a while or tomorrow about how to use the boot img's (on my phone right now, it's easier if I do it on pc). Links and details are only the second post on the page so people will still see the info they need. So yeah, if it's OK with you I'll just leave the content here rather than starting another thread with the same title
Click to expand...
Click to collapse
of course its fine.i was worried people wouldnt be able to see it.
Issue with Android 10 update on tencent with WW fingerprint
@reg66 tried moving post 2 ROM into root of storage .bit the update is still failing . New update is detected and after reboot, while it initialising install it's failing at the very start
Hi I have a CN Rog2 on ww1910.64-0 and fingerprint on ww. Using Asus updater I am getting 2001.60 .but post reboot while installing it errors out in the very beginning. Any guidance would be much appreciated !
VeeJay1 said:
Hi I have a CN Rog2 on ww1910.64-0 and fingerprint on ww. Using Asus updater I am getting 2001.60 .but post reboot while installing it errors out in the very beginning. Any guidance would be much appreciated !
Click to expand...
Click to collapse
Hmm, you should be able to update from latest A9 (1910.64) to A10. I'm guessing that the updater app only downloads the small incremental updates. These will fail unless you update 1 by 1, going up one version each time.
If you wanna jump straight to latest update (currently this one) download the FULL rom zip from post 2 of this thread. Put that in root of storage and reboot. Should hopefully not fail now and you'll be on latest.
Issue with Android 10 update on tencent with WW fingerprint
@reg66 tried moving post 2 ROM into root of storage, but the update is still failing . New update is detected and after reboot, while it's initialising install it's failing at the very start
Hi I have a CN Rog2 on ww1910.64-0 and fingerprint on ww. Using Asus updater I am getting 2001.60 .but post reboot while installing it errors out in the very beginning. Any guidance would be much appreciated !
Yes, moved to 2004.9
Did the incremental update and now my tencent rog2 on ww2004.9. thanks for the pointers.They really helped.
reg66 said:
I'd like to shed some light on this for you but I'm not a heavy gamer (I assume that's when the device gets hot mainly) and have never had any heating issues with any of the builds
Click to expand...
Click to collapse
Thanks man. Basically I had issues on A10 heating up even while just browsing the web. I would open up Armory Crate > Console and the CPU temp would be around 40+ Celsius. So now I'm back on A9, which shows temps of 30 Celsius with normal use.
well, video recording while connected to usb mic still doesn't work with the asus camera app
VeeJay1 said:
Did the incremental update and now my tencent rog2 on ww2004.9. thanks for the pointers.They really helped.
Click to expand...
Click to collapse
So the incremental worked direct from 1910.64 to latest? Or you had to go through each incremental?
---------- Post added at 07:12 PM ---------- Previous post was at 07:10 PM ----------
TikiThePug said:
Thanks man. Basically I had issues on A10 heating up even while just browsing the web. I would open up Armory Crate > Console and the CPU temp would be around 40+ Celsius. So now I'm back on A9, which shows temps of 30 Celsius with normal use.
Click to expand...
Click to collapse
Man that sucks. I've had zero heating issues even with leaving X mode on permanently @120Hz
Had to do this with each incremental update!
reg66 said:
So the incremental worked direct from 1910.64 to latest? Or you had to go through each incremental?
---------- Post added at 07:12 PM ---------- Previous post was at 07:10 PM ----------
Man that sucks. I've had zero heating issues even with leaving X mode on permanently @120Hz
Click to expand...
Click to collapse
TikiThePug said:
Thanks man. Basically I had issues on A10 heating up even while just browsing the web. I would open up Armory Crate > Console and the CPU temp would be around 40+ Celsius. So now I'm back on A9, which shows temps of 30 Celsius with normal use.
Click to expand...
Click to collapse
I've also suffered from battery and performance issues in A10. A9 was just fabulous, A10 was a step back.
I'm also a heavy gamer and just updated so I'll be sure to let you know what's going on.
P.S I did manage to improve performance and some battery life by installing the only real custom kernel we have, but which is a great one - kirisakura + Naptime with doze on Google play services.
VeeJay1 said:
Had to do this with each incremental update!
Click to expand...
Click to collapse
Ahh ok, bummer!! At least it's sorted now
Hi all, I have problem with the last update, always that's stop at 9% with message error update
dracoolia said:
Hi all, I have problem with the last update, always that's stop at 9% with message error update
Click to expand...
Click to collapse
I had the same problem with the incremental update. Just use the full ROM linked in the op.
Thanks for the Rooted Image.
Hi just chasing the raw rom if anyone has it please!
Related
Hello,
I kind of messed this myself.
I have GN 4.1.1 takju - maguro JR003C - rooted, unlocked bootloader through GN ToolKit.
Now today got OTA notification of 4.1.2.
Installed OTA Rootkeeper, opted for "Reboot and Install" in OTA screen.
Phone booted into CWM Recovery and then update failed due to signature verification.
Now I am not getting the update notification back in System Update screen.
So the big question - how to get the OTA back and even bigger question - what do I need to do to have 4.1.2 in my phone?
I have the same problem and would like to know the answer.
PeteT said:
I have the same problem and would like to know the answer.
Click to expand...
Click to collapse
i think you should manually download the rom from google when it will be available and use for easy of use gnexusToolKit to install it.
I did like this last time for the same problem and got the problem also now...
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
PeteT said:
I have the same problem and would like to know the answer.
Click to expand...
Click to collapse
https://developers.google.com/android/nexus/images
MaxDNet said:
i think you should manually download the rom from google when it will be available and use for easy of use gnexusToolKit to install it.
I did like this last time for the same problem and got the problem also now...
Click to expand...
Click to collapse
I can see for takju-maguro, there is an image for 4.1.2 at https://developers.google.com/android/nexus/images#takjujzo54k
But need some one to confirm if thats the one we need to manually install.
Also any help on my original questions will be helpful!
royzlife said:
I can see for takju-maguro, there is an image for 4.1.2 at https://developers.google.com/android/nexus/images#takjujzo54k
But need some one to confirm if thats the one we need to manually install.
Also any help on my original questions will be helpful!
Click to expand...
Click to collapse
I'm going to use that as i did last time for the 4.1.1.
Let you know.
Thank you
I hope it works. I would like to use the upgrade though and not a clean install.
PeteT said:
Thank you
I hope it works. I would like to use the upgrade though and not a clean install.
Click to expand...
Click to collapse
Done, so quick and easy. Google released a bat files inside the rom that will do it all (yeah it'll erase all your data but i like a full format sometimes so its ok for me).
So if you wanna to follow this procedure :
1 - Verify you have adb drivers installed and working
2 - power off mobile
3 - launch "flash_all.bat" files inside google rom
4 - power on the mobile in bootloader mode (menu down + menu up together and power)
This will start all the procedure.
Wait..
Done
You can open the flash-all.bat in Notepad++ and remove the -w switch and it won't wipe the data when flashed
MaxDNet said:
i think you should manually download the rom from google when it will be available and use for easy of use gnexusToolKit to install it.
I did like this last time for the same problem and got the problem also now...
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
MaxDNet said:
Done, so quick and easy. Google released a bat files inside the rom that will do it all (yeah it'll erase all your data but i like a full format sometimes so its ok for me).
So if you wanna to follow this procedure :
1 - Verify you have adb drivers installed and working
2 - power off mobile
3 - launch "flash_all.bat" files inside google rom
4 - power on the mobile in bootloader mode (menu down + menu up together and power)
This will start all the procedure.
Wait..
Done
Click to expand...
Click to collapse
Thanks but could you please help with a bit more detailed for noobs like me!
1. How will we come to step 3? is it through genx toolkit?
2. delete all user data - you mean everything under /sdcard/ ? Means will need a backup of "everything" of my nexus!
Thanks again!
It's in the factory image you download from Google
royzlife said:
Thanks but could you please help with a bit more detailed for noobs like me!
1. How will we come to step 3? is it through genx toolkit?
2. delete all user data - you mean everything under /sdcard/ ? Means will need a backup of "everything" of my nexus!
Thanks again!
Click to expand...
Click to collapse
Hi i dont used GNexus toolkit.
The step i did are the following :
1 - Download the GNexus image (i downloaded the one without Google Wallet) from here https://developers.google.com/android/nexus/images#takjujzo54k and extract the content wherever you want on your pc.
2 - verify that your ADB drivers are installed and your mobile is recognized succesfully (you can do this by installing the gNexus toolkit and follow the inline instructions).
3 - Download if you dont have the fastboot (attacched) and for easy of use extract the content inside the folder of the downloaded ROM (would be better to install in a global folder and set it into windows global variables)
4 - Once extraced go into the folder where you have the extracted ROM and open the file "flash_all.bat" with a notepad
5 - update this line "fastboot -w update image-takju-jzo54k.zip" with this "fastboot update image-takju-jzo54k.zip" if you dont want to wipe your data and save the file.
6 - Inside this folder SHIFT + RIGHT MOUSE CLICK and select "Open Command Prompt from here"
7 - write flash_all.bat and it'll say it's waiting for device to be connected
8 - Power OFF your Mobile if you didnt do yet
9 - POwer ON your mobile in bootloader mode using the combination of VOLUME UP + VOLUME DOWN + POWER (all together at the same time)
The procedure will starts and your mobile will be updated in less than 2 minutes.
Hope this is clear.
It works perfectly!! Thank you.
It couldn't have been put more lucidly! Thanks.
But after installing 4.1.2, Titanium Pro stopped working! I uninstalled and then tried to reinstall but got "no space" error though 9GB is left free!
Any help!
---------------------------------
Solved from this post - http://forum.xda-developers.com/showthread.php?t=1717897
-------------------------------------
Moderators, please mark this thread as SOLVED
hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here
I think we need to flash first the EMUI 4.1 recovery.img
Houamei said:
I think we need to flash first the EMUI 4.1 recovery.img
Click to expand...
Click to collapse
i've flash erecovery.img and recovery.img extracted from the update.app --> reboots too on 5%
extracted 4.1 Recovery: mega.nz/#!1MdXmART!Bbd3COTNnCsOB4iVMwQ0vOQhdEvzWDaWVnRhMwFMg08
xCite86 said:
hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here
Click to expand...
Click to collapse
There is a link for a rollback update, but i'm not home. When I get there, I send it. About battery, try to use greenify to help it to last long.
You can't just try to use a full package because of versioning scheme they use.
Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip
Same problem here, still drops at 5% even with the new file
I just wana know the best way to revert to stock
---------- Post added at 07:32 PM ---------- Previous post was at 07:28 PM ----------
and sorry I don't have an SD Card
Vinnom said:
Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip
Click to expand...
Click to collapse
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes
can we extract all from the ota update zip and install via flash? can this work?
xCite86 said:
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes
Click to expand...
Click to collapse
Hmmm, sorry, I thought it would help. In fact, the package is listed as a rollback to M, but it is for CAN-L11. The rollback for CAN-L01, I didn't find. As there isn't many differences between those models, I thought it would work
EDIT: now that I read the op again, I noticed that your model is CAN-L11. I wonder why it didn't work
Houamei said:
can we extract all from the ota update zip and install via flash? can this work?
Click to expand...
Click to collapse
No, it won't.
The reason behind this is because system partition get smaller (because nougat way of update) after updating it to emui 5. So the old system.img won't fit the new partition
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
So you downgraded?
Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
did you downgrade your nougat successfully with the files above??
edit: i tried it without a connected usb cable and got "software install failed!" after short time
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
i think this should work if you or someone else share a backup i could try..
Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
no, in my opinion the nougat bootloader want work with mm.
I would flash the firmeware of mm and after that flash twrp and restore the backup after that [emoji106]
It will work. There is a backup within twrp thread, from bluesmothie.
Vinnom said:
It will work. There is a backup within twrp thread, from bluesmothie.
Click to expand...
Click to collapse
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.
Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
Yeah, thanks Vinnom...
xCite86 said:
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.
Click to expand...
Click to collapse
Did the same thing, but first TWRP didn't find the backup. So i did a small backup just of the boot partition, so that TWRP makes a new backupfolder "FPF4C16A07000014"". Now i renamed the " FPFDU16930014596" to the new "FPF4C16A07000014" and TWRP found the backup and i was able to restore :highfive::highfive:
Small Addition:
It was a freaking fight to get my bootloader unlocked again, cause i lost the unlock code.
The websites (english and asian) are freaking BS. Was not able to get to the page where you get the code, so i downloaded DC-Tool and payed 4 dollars for the damn code.
Now the code is saved in my owncloud, dropbox, google drive, on a sheet of paper and google notes. No way to lose it again
B100 firmware is much smoother than B320 but has a lack of comfort, like i'm missing the new quick settings with double pull down and the touch responsibility of slide bars (like the volume bars) is not very good in B100... But i won't upgrade to 320 again, because of the following points that make it a no go for daily driver:
- Camera is very slow and hangs up
- Video playback is very slow and buggy (no matter if it's in the galery or youtube, ect.)
- Fingerprint is too slow
- Whole system gets very slw if you dont clean up the app history
Will upgrade again when there is a new version out
please am having same issue here. tried restore but still not booting.
problem is cust. what do i do about it.
HELP ME
Hello all!
This morning I updated Magisk Manager.
Once updated (or perhaps only downloaded update) the app prompted a reboot.
I rebooted and ended up in TWRP.
But I did not know what to do in TWRP so I rebooted system...
However, now the phone cannot boot and after one try it reboots into TWRP again.
PLEASE HELP ME!
I need my phone for work! Like now-now! :silly: :crying:
dustylambo said:
Hello all!
This morning I updated Magisk Manager.
Once updated (or perhaps only downloaded update) the app prompted a reboot.
I rebooted and ended up in TWRP.
But I did not know what to do in TWRP so I rebooted system...
However, now the phone cannot boot and after one try it reboots into TWRP again.
PLEASE HELP ME!
I need my phone for work! Like now-now! :silly: :crying:
Click to expand...
Click to collapse
How soon is now ? follow the white rabbit:good:
https://forum.xda-developers.com/zenfone2/help/help-bootloop-to-recovery-t3577504
timbernot said:
How soon is now ? follow the white rabbit:good:
https://forum.xda-developers.com/zenfone2/help/help-bootloop-to-recovery-t3577504
Click to expand...
Click to collapse
Well, that rabbit went into quite the hole... hehe
However, at the other end was a person who restored an old backup to revert this problem... And I -MAYBE- have an old backup on my external hdd, but won't that wipe all data that has been written to my phone since that "MAYBE" backup?
The other suggestion was wiping my MISC-partition using commands through ADB - something I have no clue how to setup and/or execute.
Still, thank you so much for your effort!
Reading all of this made me remember that one time I spaced out and tried to install an official firmware update upon release and prompt, which lead to the same issue. I could then just reinstall an older raw firmware version, which left all my files and data intact. Hopefully this will work here too.
BUT... It still feels very risky. If anyone out there has any sure-fire solution to this update Magisk Manager through the built-in updater no-boot issue, then please feel free to let me know - I would be forever in your debt
The best surefire solution is just don't. And BTW always backup before you flash anything in twrp.
Sent from my ASUS_Z00A using Tapatalk
---------- Post added at 08:49 AM ---------- Previous post was at 08:47 AM ----------
timbernot said:
How soon is now ? follow the white rabbit:good:
https://forum.xda-developers.com/zenfone2/help/help-bootloop-to-recovery-t3577504
Click to expand...
Click to collapse
I love what you did there! Lol
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
The best surefire solution is just don't. And BTW always backup before you flash anything in twrp
Click to expand...
Click to collapse
I didn't flash anything in twrp. If you're gonna reply at least read the post. Also, none of what you wrote is a solution, unless you're in possession of a time machine. I'll keep it in mind for the next time though (of which there won't be one). Thanks, captain hindsight.
dustylambo said:
I didn't flash anything in twrp. If you're gonna reply at least read the post. Also, none of what you wrote is a solution, unless you're in possession of a time machine. I'll keep it in mind for the next time though (of which there won't be one). Thanks, captain hindsight.
Click to expand...
Click to collapse
That's what the update does. Reboots to twrp and installs the download. Maybe you should know what you're doing before you snap at us.
Sent from my ASUS_Z00A using Tapatalk
dustylambo said:
However, at the other end was a person who restored an old backup to revert this problem... And I -MAYBE- have an old backup on my external hdd, but won't that wipe all data that has been written to my phone since that "MAYBE" backup?
Click to expand...
Click to collapse
No, just restore the boot partition (16MB).
I learnt the hard way about backup, when years ago I didn't make one for my Galaxy S2 and lost everything (pictures, etc). Now after installing TWRP I always do a backup...
You should be able to reflash your boot partition with a fastboot command like "fastboot flash boot boot.img" (people with more knowledge than me can help you)
EDIT: the problem is that our Zenfone2 needs a signature for the boot partition, this is why we have a special Magisk installer that just add the signature to the image. The automatic update installer of Magisk has no clue about this, me and a few others here made the same mistake as you when Magisk popup "I have an update!" and we clicked "Install"...
All your data and app are still there, do not worry, no need to wipe anything, just reflash a signed boot.
kenbo111 said:
That's what the update does. Reboots to twrp and installs the download. Maybe you should know what you're doing before you snap at us.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Look... I am sorry if I "snapped" as you put it... But let's make one thing clear - I snapped at YOU; there is no "us" in this case, as you tried to skew it. Don't lump yourself together with these other helpful people, because so far you have nothing in common to me. If I were looking for someone to go "Hey, I got a solution - you know that thing you did? - Don't do it again!" I'd just go stand on the street corner with a sign asking for someone to slap my face.
As for your principal of don't do things if your not sure of how they work, I am totally behind that. But it has NOTHING to offer here as we are past that point. A broad comparison would be like "a solution to world hunger = eat food" ("but we don't have any food!" "you should have thought of that before you started starving now shouldn't you...?!").
In your defense, I guess you really believe you are trying to help. But compare your comment to the other ones posted and it is quickly clear that you are not. However, YOU ARE RIGHT, I should've known better and shouldn't do it again. And obviously I am enerved at this situation, but equally obvious (now) is that what you wrote is NOT "the best sure-fire solution" as what was posted afterward seems at least 100% (would have been more if possible) more applicable to my issue.
Anyway, I'll do the right thing here in the end, after having said so many things, and admit, once again, that I was wrong, you were right, I snapped for no good reason and you were just trying to help.
And I sincerely apologize for my rude behaviour. Hopefully now you can at least understand my reaction.
Also, fair is fair - Maybe TWRP flashes the update before it even enters into it. It would be the first I've EVER heard of something like that. But I am out of my element a bit here, so I will withdraw that comment and once again apologize for snapping at you because of it.
Magister54 said:
No, just restore the boot partition (16MB).
I learnt the hard way about backup, when years ago I didn't make one for my Galaxy S2 and lost everything (pictures, etc). Now after installing TWRP I always do a backup...
You should be able to reflash your boot partition with a fastboot command like "fastboot flash boot boot.img" (people with more knowledge than me can help you)
EDIT: the problem is that our Zenfone2 needs a signature for the boot partition, this is why we have a special Magisk installer that just add the signature to the image. The automatic update installer of Magisk has no clue about this, me and a few others here made the same mistake as you when Magisk popup "I have an update!" and we clicked "Install"...
All your data and app are still there, do not worry, no need to wipe anything, just reflash a signed boot.
Click to expand...
Click to collapse
NOW THIS IS HELPING!
THANK YOU SO MUCH!
Basically, you are saying that I would, in theory, just have to use fastboot and flash boot.img (extracted from any firmware?) again, which I am very familiar with how to do, and presto - boot partition restored and working (once again, in theory)?
Sounds amazing!:good:
dustylambo said:
NOW THIS IS HELPING!
THANK YOU SO MUCH!
Basically, you are saying that I would, in theory, just have to use fastboot and flash boot.img (extracted from any firmware?) again, which I am very familiar with how to do, and presto - boot partition restored and working (once again, in theory)?
Sounds amazing!:good:
Click to expand...
Click to collapse
Yes, if you have a Z00A for instance with MM version 223, take the Z00A.zip file from https://forum.xda-developers.com/zenfone2/general/bl-unlock-ze551ml-toolkit-t3546293 and use the file stock\z00a\223\boot.img
This is stock unsigned boot.img file for M .223
http://www.mediafire.com/file/rw73099svgbv0kv/boot.img
timbernot said:
boot.img file for M .223
http://www.mediafire.com/file/rw73099svgbv0kv/boot.img
Click to expand...
Click to collapse
Is there any way to check from TWRP or using fastboot, or otherwise find out what version of the rom I have (had)?
I am definitely still on LolliPo... I think I am one or two official updates from the switch to MarshMallow... But how can I be sure?
WW_ZE551ML_2.20.40.139_sal358-amtech.vn
Last year sometime I ran into a similar problem, where I had to flash raw firmware in order to unbrick the phone... This is the firmware that I downloaded and flashed then.
However, within this .raw-file there is no boot.img ...? There are a couple of .img-files, but none named boot.
On a side-note: When I bricked it last year and had to flash this raw firmware, which I did with Asus Flash Tool, if I am not mistaken... However, whichever way I did it, I managed to flash and then boot as usual. The phone then updated all apps, and I was just blessed with this wonderful sight of "my phone" with all the apps, files and data still intact.
And this problem, which resulted in the same boot issue, came from trying to apply an official OTA update, just after rooting and unlocking the bootloader (forgot myself for just a moment there), which to me seems like a way more serious screw-up than what I just managed to do today...?
@dustylambo
You still boot to TWRP ?
Simple questions
check date of back ups , course you won't be able to restore but title will have builds.
What twrp build ?
Then....
Select reboot in twrp then power off in twrp .
Wait 15 seconds...
Power plus vol+ , you can now boot to bootloader.
What IFWI version ?
0094.0177 or .0173 is LP
0094.0183 is M
Flash relevant raw , without ticking wipe data in AFT.
Check my unbrick thread in my signature for AFT and links to raws
Enjoy
timbernot said:
@dustylambo
You still boot to TWRP ?
Simple questions
check date of back ups , course you won't be able to restore but title will have builds.
What twrp build ?
Then....
Select reboot in twrp then power off in twrp .
Wait 15 seconds...
Power plus vol+ , you can now boot to bootloader.
What IFWI version ?
0094.0177 or .0173 is LP
0094.0183 is M
Flash relevant raw , without ticking wipe data in AFT.
Check my unbrick thread in my signature for AFT and links to raws
Enjoy
Click to expand...
Click to collapse
Yes, I still boot into TWRP.
I can't find my old backup for some reason, but after flashing the previously mentioned raw firmware I never up- or downgraded the ROM, so it MUST be that version. It's the only one I've ever downloaded and flashed.
IFWI version is 0094.0183
But so you are saying I could basically just flash [correct version FW].raw via AFT, without wiping data, and all should be good?
I am on your unbrick thread aws.
I will def bookmark it.
But I already have AFT and the same FW... so I could just go-go-go, right? Or is the IFWI version being M an issue?
Also, I downloaded the official Asus FW from their ZF2 website. In that .zip is in fact a "boot.img" - can I flash this via fastboot you think?
Thanks again for all your help!
You are unbelievable!
@dustylambo
0094.0183 is M
So flash a M raw.
You must've upgraded bootloader since flashing the last raw .139 which is LP to get to M bootloader .0183
In bootloader .0183
You flash raw for M, these have just been added by realyoti
drop him a thanks .
Flash without ticking wipe data in AFT
Damnit! I don't like where this is going... But it's late and I'm dumb
I never upgraded to M because I read that there were several apps that would lose support, MUSIC in particular, but there were others as well.
Will an M raw-file flash and still boot with all my old apps?
@dustylambo
It's simple really , what is the twrp build number ?
You never said
0094.0177
Is locked 5 LP bootloader.
.0173 is 5 unlocked bootloader
.0183 is M
What twrp build is yours ?
Ps , I don't think it matters which version raw you flash , only that it may fail and might have to wipe data to succeed which is better than what you have and are struggling with right now
gnite , enjoy
---------- Post added at 11:45 PM ---------- Previous post was at 11:30 PM ----------
Pls , remember the reason you installed twrp initially ?
For backing up
Sounds like you didn't only update Magisk Manager, you update Magisk itself. A non-signed Magisk update will always result in bootloop.
adobrakic said:
Sounds like you didn't only update Magisk Manager, you update Magisk itself. A non-signed Magisk update will always result in bootloop.
Click to expand...
Click to collapse
To be corrected: Not the Magisk, but the repacked boot.img. ?
Sent from my Redmi 3 using XDA Labs
This is NOT my work (Ianmacd) and guide is written by Mr Pickles all credits to him for his install method.
Also this is just a copy and paste but the guide is well written and TWRP should cause less issues.
I'm sure Gieti94 is just perhaps busy with other commitments, credit also to him for his fantastic efforts.
Just a new space for the currently working TWRP so all don't get in a pickle.
----------------------------
Download Maintained By Pickles (best all in one convenient place) will have everything necessary for twrp functionality. Credit to pickles.....:good:
http://bit.ly/2VlcqYd
Excellent installation Guide below
Install Guide
---------------------------
- NOT A SINGLE STEP IS UNNESSECARY
- DO THEM _ALL_ EXACTLY!
- ALL YOUR DATA WILL BE GONE - BACKUP!
---------------------------------------
DO NOT INSTALL MODPACK FROM SOLDIER - IT BREAKS TWRP!
---------------------------------------
If you have any problems - contact @PiCkLeS or on Telegram by PiCkLeS or @rp4k
---------------------------------------
All development is by @ianmacd (Ian Macdonald).
---------------------------------------
0 - No matter what you have today, no root or Magisk-only solution or TWRP with Magisk-solution, do ALL the steps..
1 - Make sure you copy the "Magisk_Manager_Ian_install.apk" file and "Multidisabler-g97x_by_Ian.zip" file to your sd-card before you start!
2 - Download latest firmware via Samfirm or Frija or in any way you can, and unpack.
3 - Boot your phone to Download mode (Power+Bixby+VolDown) and remember to have the USB connected to your computer, it won't boot to DL-mode otherwise
4 - Keep autoboot etc in Odin settings, put each file in its place (AP, BL, CSC etc) and _dont_ use HOME_CSC, use CSC-only-file.
5 - After Odin is done, your phone will reboot automatically - let it! It can feel like forever, but let it do its restarts and stuff until you are in system-setup
6 - Do the setup as per usual, CONNECT TO WIFI but you can safely just say Skip on sign in and other stuff
7 - When setup says its all finished and you get to the standard launcher - go into Settings and enable Developer settings
8 - This step IS necessary.. If you don't do this step, you might get in pre-normal rrm state and you will have wait 7 days to try again: Enter Developer settings and look for the "OEM Unlock" switch - if you are rooting for the first time, Enable it. If you already have root since before or unlocked your bootloiader before, just confirm that its Enabled and graded out.
9 - If you already have an unlocked bootloader, skip to step 12. If not, continue with step 10.
10 - IF you never have unlocked your bootloader before, Power off the phone and boot into download mode again. You will see the long press volUp option for unlock bl, do that.
11 - IF you never have unlocked OEM before, boot the phone again, do the setup without signing in etc but connect to wifi, enable dev settings, go into dev settings and check that OEM now is enabled and grayed out.
12 - Reboot the phone in recovery mode (Power+Bixby+VolUp and keep holding until you are in stock recovery. Choose and do a factory reset.
13 - Reboot to bootloader with option in Recovery.
14 - Flash the tar you got (S10x-TWRP+Magisk_fixed_by_Ian.tar I Odin in the AP-slot. DISABLE auto reboot in Odin first!
15 - When the tar has flashed - Do as instructed on the phone, hold Power+VolDown for a few seconds and AS SOON AS THE SCREEN GOES BLACK -> quickly press power+bixby+volUp for a _long_ time, and I mean it can feel as if its a full minute! After a while you will see TWRP starting with its start screen, you can now let go and enter TWRP.
16 - FORMAT data, then WIPE data AND Cache. DO NOT LET IT REBOOT
17 - Flash "Multidisabler-g97x_by_Ian.zip" from SD card
18 - Go back to start screen of TWRP, Choose Reboot, Choose Recovery - YOU MUST ALWAYS CHOOSE REBOOT TO RECOVERY and _NOT_ system!
19 - Let the phone reboot into system, it will do some reboots it self, and again it will feel like it takes FOREVER - Just let it do its thing and DO NOT PRESS ANY KEYS!
20 - When your phone is finally done booting, just do the normal setup/signing for real this time.
21 - When you are done and in system/launcher, install "Magisk_Manager_Ian_install.apk" from SD card and verify that you now have Magisk Manager installed.
22 - Start Magisk Manager and say YES to what it says, it will do some stuff and then say "Rebooting in 5 seconds" - LET IT BOOT AND DO NOT TOUCH ANY KEYS this time either..
23 - Now when booted to system, start Magisk Manager and see that you have all green and its installed.
24 - Now you have root.
** Every time you reboot manually, be prepared to hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and let it reboot, you will have root.
** Every time you power off the phone, when you power ON again, hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and it will boot with root.
** Every time you want to enter TWRP-recovery, do as above but KEEP HOLDING THE KEYS UNTIL TWRP-start screen shows then release. Remember to choose reboot to recovery afterwards and you will boot with root.
** IF you screw up and forget or miss the key combo, just let it boot to system, immediately when system is up - reboot again and do the key combo and all is fine again.
This is me just trying to get an emergency first aid space, nothing more, I'm NOT trying to take any credits or dismiss Gieti94.
Thanks All
Duncan1982 said:
This is NOT my work (Ianmacd) and guide is written by rp4k all credits to him for his install method.
Click to expand...
Click to collapse
This is my tutorial and not r4pk. And I'd prefer that you use the download I provide here and no where else to make sure the right files gets downloaded when updated.
http://bit.ly/2VlcqYd
/P
Yea I can keep the OP updated, this is just an emergency first aid thread, thanks to Pickles for his well written guide.
I'm really not wanting to offend anyone, just for all to make life a bit easier....
very nice to have a reliable twrp solution, pitty that we don't have too many things to flash in recovery
Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P
I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
And yes I never said I wrote the guide I just added myself for helping people
rp4k said:
I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
Click to expand...
Click to collapse
I understand. But that doesn't seem to be a big problem for any one else and the bigger problem is that you risk having a link that is being used by the people only see it here and don't read anywhere else, or this message, and end up with old information or even worse, outdated files.
I can help you get the files on PM but please remove these links outside of my drive, which I maintain every day and keep up to date. It's not for vanity, it's for safety.
For now please edit your text and remove the link. All must use v1.1 of the multidisabler zip by Ian.
/P
Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.
Duncan1982 said:
Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.
Click to expand...
Click to collapse
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P
PiCkLeS said:
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P
Click to expand...
Click to collapse
I fully appreciate and understand that, the reason I created as I have plenty of time to maintain, and will keep it up to date I have been around for quite some time, if you look at my posts (search) I have had almost every device you can think of, currently have the Vivo IQOO also, I have enough experience to understand the important and implications.
I don't want your PM's to be going crazy so I'll fully respect your decisions and will keep everything updated also. But it is better if everything is tody and not one thing here and there, OP has been updated with your direct link, is this cool?
Just thought by creating this thread that it might help, my sincere and good intentions are hopefully evident
PiCkLeS said:
Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P
Click to expand...
Click to collapse
Can I install multi Disabler 1.1 withouth lost data?
zubi182 said:
Can I install multi Disabler 1.1 withouth lost data?
Click to expand...
Click to collapse
Yes just flash it in twrp, nothing will be lost.
/P
I assume this is only for the Exynos version? Or does it work for Snapdragon as well?
mistermidas said:
I assume this is only for the Exynos version? Or does it work for Snapdragon as well?
Click to expand...
Click to collapse
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk
rp4k said:
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk
Click to expand...
Click to collapse
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.
mistermidas said:
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.
Click to expand...
Click to collapse
Sorry I responded when I was half asleep. My fault.
I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?
mercifool said:
I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?
Click to expand...
Click to collapse
Yes, just do exactly all the steps and use the new files in the link and you will be fine.
//P
deleted
Carotix said:
hi ,
do you have the OEM switched to on?
if not , you need it ..... if you can't get it because you are waiting the 7 days , you can make this trick
open settings and set the date 8 days before ... then reboot
so you can enable OEM in developer settings
Click to expand...
Click to collapse
Hi there, are these instructions for Exynos only or can I apply it to Snapdragon as well, please advise. Thank!
Version: WW_17.0230.2004.60
Model: ROG Phone II (ZS660KL)
Release Date: 05/13/2020
1. Enabled randomized MAC feature for WIFI connections
2. Fixed issue where occasionally video playback would freeze
3. Fixed issue causing sound value reverting to default when user insert a headset, adjust the bass value in AudioWizard and answering a call.
4. Fixed the issue where the screen refresh rate in Quick settings is not grayed out when opening a game app
5. Fixed issue where app would crash if user press the back key when replying email with GMail in tablet mode with DT Dock
6. Fixed video search issue on Game Genie
7. Fixed APP Lock function issue
8. Fixed Settings crash issue in French localization
9. Fixed occasional splash screen issue
Links:
https://zentalk.asus.com/en/discussion/28197/200507-rog-phone-ii-zs660kl-ww-17-0230-2004-60
https://dlcdnets.asus.com/pub/ASUS/..._I001_1-ASUS-17.0230.2004.60-1.1.162-user.zip
where did you get the link? i can only see WW-17.0230.2002.32 in the oficial page.
Just did update thanks for info Asus haven't updated the download area for ww only cn
Downloaded and left in root directory and I got updated no prob. Randomizing mac address is a great feature to reduce the tracking that websites do.
hello good I have an asus rog phone 2 asus I001DE I am in Spain would be updated by ota ?? thanks greetings
Hi all, I have a little problem, I have installed TWRP and magisk all working well, but when I want to install YT vanced I have bootloop, I flash boot.img in fastboot, but now when I want to install magisk I have bootloop, to restart again the phone I need to flash twrp.zip by twrp loll
Someone can help me to have again root ?
I think if I flash in fastboot stock recovery I can install against correctly TWRP and magisk, but I don't find stock recovery.imp
I'm in the last update Android 10 (2004.60)
Does this version include the hide navigation bar for gesture navigation function to WW ROM officially?
First go into twrp and go to advanced, then click on the "fix recovery boot loop" now you are unrooted, and if your phone turns on download this "Magisk Manager for Recovery mm" , also download magisk 20.4 zip file to falsh it into twrp.
After that boot into twrp flash magisk v20.4.zip, now flash the other file which is *magisk manager for recovery* and after you flash it go to terminal and then type
mm
then select the modules that you want to remove ( I suggest to remove all of them, later you may be able to install them) after that when you have removed the module, reboot the phone into system and done.
I hope I was able to help you
After several tweaks, SOT is 17 hours on 120Hz. Battery life is very so slightly better than A9. And temperatures are much lower than A9. I removed brightness module and phone no longer ever heats up. While gaming temps are incredibly low. Much lower than A9.
Edit: That good battery existed only for a day or two, phone started heating up randomly again with random quick battery drains. I went back to A9.
str8_c0ol said:
First go into twrp and go to advanced, then click on the "fix recovery boot loop" now you are unrooted, and if your phone turns on download this "Magisk Manager for Recovery mm" , also download magisk 20.4 zip file to falsh it into twrp.
After that boot into twrp flash magisk v20.4.zip, now flash the other file which is *magisk manager for recovery* and after you flash it go to terminal and then type
mm
then select the modules that you want to remove ( I suggest to remove all of them, later you may be able to install them) after that when you have removed the module, reboot the phone into system and done.
I hope I was able to help you
Click to expand...
Click to collapse
Thx bro, I will try that
vygneys_vyg said:
After several tweaks, SOT is 17 hours on 120Hz. Battery life is very so slightly better than A9. And temperatures are much lower than A9. I removed brightness module and phone no longer ever heats up. While gaming temps are incredibly low. Much lower than A9. This A10 latest update is the best one so far. Kudos to the ASUS team!
Click to expand...
Click to collapse
can you please explain these tweaks. my phone still heats up, backup is nowhere near A9
Having trouble with the new firmware using Bluetooth stuff. It'll connect but no audio will play. Also yeah sot still blows.
how to update? step by step ..
now im on android 9 ww1910.64 .. i want update to this version . anyone can help me .step by step to update? sorry im newbie
Dedek2415 said:
how to update? step by step ..
now im on android 9 ww1910.64 .. i want update to this version . anyone can help me .step by step to update? sorry im newbie
Click to expand...
Click to collapse
Don't update. Battery on 10 is **** compared to 9. And I have Bluetooth problems now among others.
jkieffer46 said:
Don't update. Battery on 10 is **** compared to 9. And I have Bluetooth problems now among others.
Click to expand...
Click to collapse
I haven't read many people at all with battery problems after latest update. Most people are very happy with it. I read most telegram groups on the device.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
Dedek2415 said:
how to update? step by step ..
now im on android 9 ww1910.64 .. i want update to this version . anyone can help me .step by step to update? sorry im newbie
Click to expand...
Click to collapse
Download from the link, it's the full zip required to go to latest stable (#3 - 2004.60), copy it to root direct off phone, restart and wait for system to detect and prompt you. Click update then restart. Are you rooted?
https://dlcdnets.asus.com/pub/ASUS/..._I001_1-ASUS-17.0230.2004.60-1.1.162-user.zip
reg66 said:
I haven't read many people at all with battery problems after latest update. Most people are very happy with it. I read most telegram groups on the device.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
Download from the link, it's the full zip required to go to latest stable (#3 - 2004.60), copy it to root direct off phone, restart and wait for system to detect and prompt you. Click update then restart. Are you rooted?
https://dlcdnets.asus.com/pub/ASUS/..._I001_1-ASUS-17.0230.2004.60-1.1.162-user.zip
Click to expand...
Click to collapse
Can I directly install this Android 10 from my Android 9 position?
Its there....
HermesHidayat said:
Its there....
Click to expand...
Click to collapse
hello good I am newbie and I would like to know if I can install the update my version of mobile is: pkq1.190414.001.ww_phone-16.0631.1910.64 I would not like to brikear my mobile because I have no experience and it will be very messy fix please I want to respond thank you
Dedek2415 said:
Can I directly install this Android 10 from my Android 9 position?
Click to expand...
Click to collapse
Yes, 1910.64 is latest A9, you can use the full zip link I provided to update
---------- Post added at 11:30 AM ---------- Previous post was at 11:28 AM ----------
Fran1177 said:
hello good I am newbie and I would like to know if I can install the update my version of mobile is: pkq1.190414.001.ww_phone-16.0631.1910.64 I would not like to brikear my mobile because I have no experience and it will be very messy fix please I want to respond thank you
Click to expand...
Click to collapse
Provided your fingerprint matches your WW rom (you can check your fingerprint by using device info hw from playstore under system), you can go ahead and update to latest A10. See a couple of posts above this one for link
reg66 said:
Yes, 1910.64 is latest A9, you can use the full zip link I provided to update
---------- Post added at 11:30 AM ---------- Previous post was at 11:28 AM ----------
Provided your fingerprint matches your WW rom (you can check your fingerprint by using device info hw from playstore under system), you can go ahead and update to latest A10. See a couple of posts above this one for link
Click to expand...
Click to collapse
I don’t know how to verify it just look at what I sent so I’m not sure to update