Develop Bugs

Firmware finder is finally working again

Emui 8 only for now

Dont work, i tried to use recovery on EML-L29 and anything.

Dossiko said:
Dont work, i tried to use recovery on EML-L29 and anything.
Click to expand...
Click to collapse
Follow this thread
https://forum.xda-developers.com/huawei-p20-pro/how-to/upgrade-to-android-pie-throught-t3884054

jigodi said:
Follow this thread
https://forum.xda-developers.com/huawei-p20-pro/how-to/upgrade-to-android-pie-throught-t3884054
Click to expand...
Click to collapse
Works! thank you my friend!

jigodi said:
Follow this thread
https://forum.xda-developers.com/huawei-p20-pro/how-to/upgrade-to-android-pie-throught-t3884054
Click to expand...
Click to collapse
I have tried this method, but for EML-L29 C432 the is only one Pie version approved for installation and erecovery downloads a EML-L09 one. Would i lose dualsim when I install this?

lemon1213 said:
I have tried this method, but for EML-L29 C432 the is only one Pie version approved for installation and erecovery downloads a EML-L09 one. Would i lose dualsim when I install this?
Click to expand...
Click to collapse
When downloading it shows that it is for eml-l09 but I had no problem after installing.

jigodi said:
When downloading it shows that it is for eml-l09 but I had no problem after installing.
Click to expand...
Click to collapse
I can see this is available for mine too. How can I install this using FF. I am not rooted btw. Thanks!

richyg81 said:
I can see this is available for mine too. How can I install this using FF. I am not rooted btw. Thanks!
Click to expand...
Click to collapse
Follow that thread linked above. The upgrade works only through eRecovery

Hey, Folks!
I recently switched from P9 to P20 (L29). Now that Erecovery supports Pie/Emui 9 I want to install Pie with it. According to this german page I have to choose the "correct firmware package". With a quick look into FirmwareFinder I found two similar named and "approved" firmwares but they have different sizes. 3.804 GB vs 3.823 GB. What firmware should I take?
Thank you in advance.

Jan Philipp said:
Hey, Folks!
I recently switched from P9 to P20 (L29). Now that Erecovery supports Pie/Emui 9 I want to install Pie with it. According to this german page I have to choose the "correct firmware package". With a quick look into FirmwareFinder I found two similar named and "approved" firmwares but they have different sizes. 3.804 GB vs 3.823 GB. What firmware should I take?
Thank you in advance.
Click to expand...
Click to collapse
I used the biggest file. No problems.

magisk_patched.img file

Hi All,
I am creating a thread for users to share the patched boot images. People may get some help in flashing them as we dont have a working TWRP yet for Oneplus 7T.
Lets help each other and enjoy root!
US Version
10.0.4
https://drive.google.com/file/d/1cbFXQyl_GnwO6GbE_tEg_CErKUyOKM2Q/view?usp=sharing
European Oneplus 7T
https://forum.xda-developers.com/on...to-root-oneplus-7t-twrp-t3979307/post80618153
Oneplus 7T Indian Variant
Stock: https://drive.google.com/file/d/1-nogyMXx0f5AGWgHZ5hVXklhmsenQ8C6/view?usp=drivesdk
Patched: OOS 10.0.3 & 10.0.4
https://drive.google.com/drive/u/0/mobile/folders/100u-3R_k0MPm6lnl9fveaALHsJIlZRRn?usp=drive_open

US Version
10.0.4
https://drive.google.com/file/d/1cbFXQyl_GnwO6GbE_tEg_CErKUyOKM2Q/view?usp=sharing

gregfink said:
US Version
10.0.4
https://drive.google.com/file/d/1cbFXQyl_GnwO6GbE_tEg_CErKUyOKM2Q/view?usp=sharing
Click to expand...
Click to collapse
Do i need to unlock bootloader first?

MrGimpGrumble said:
Do i need to unlock bootloader first?
Click to expand...
Click to collapse
Yes. You'll have to have an unlocked bootloader and use fastboot to flash the img to your active boot slot.

European Oneplus 7T
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307/post80618153
This file from XDA-User Widmo worked fine for my German Oneplus 7T. Thank you to Widmo!

Oneplus 7T Indian Varient Patched Images
OOS 10.0.3 & 10.0.4
https://drive.google.com/open?id=100u-3R_k0MPm6lnl9fveaALHsJIlZRRn

dorianstgt said:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307/post80618153
This file from XDA-User Widmo worked fine for my German Oneplus 7T. Thank you to Widmo!
Click to expand...
Click to collapse
I confirm this.

what is the difference between magisk patched and normal patched?

gregfink said:
US Version
10.0.4
https://drive.google.com/file/d/1cbFXQyl_GnwO6GbE_tEg_CErKUyOKM2Q/view?usp=sharing
Click to expand...
Click to collapse
So what, I can update to 10.0.4 and just flash this using fastboot flash boot.img and I'm rooted?
Thanks.

Arekku said:
So what, I can update to 10.0.4 and just flash this using fastboot flash boot.img and I'm rooted?
Thanks.
Click to expand...
Click to collapse
Exactly

gregfink83 said:
Exactly
Click to expand...
Click to collapse
Fingers crossed. Really don't want to have to wipe my phone again... Ran into some issues with the other thread that was posted here, notably this:
Tapped "Hide Magisk" in Magisk settings
nothing happened so I tapped it again, nothing, queue rage taps because despite working in IT I'm still an idiot.
then closed out and went back in and magisk acted like it wasn't installed
Reboot and black screen after seeing the wallpaper for just a second.
Had to use the stock 10.0.3 ROM posted here to get back to working. Hopefully I'll be able to restore to that... if not I guess I can use my pixel 2 til a 10.0.4 version comes along...

bhavstech said:
what is the difference between magisk patched and normal patched?
Click to expand...
Click to collapse
All boot images are Magisk patched only. It's just the file naming

nick_22 said:
Hi All,
I am creating a thread for users to share the patched boot images. People may get some help in flashing them as we dont have a working TWRP yet for Oneplus 7T.
Lets help each other and enjoy root!
Click to expand...
Click to collapse
Could you post the unpatched boot image? I soft bricked my op7t with a magisk module

supaflyx3 said:
Could you post the unpatched boot image? I soft bricked my op7t with a magisk module
Click to expand...
Click to collapse
Added in OP. I hope you need Indian Variant stock boot.img file.

nick_22 said:
Hi All,
I am creating a thread for users to share the patched boot images. People may get some help in flashing them as we dont have a working TWRP yet for Oneplus 7T.
Lets help each other and enjoy root!
US Version
10.0.4
https://drive.google.com/file/d/1cbF...ew?usp=sharing
European Oneplus 7T
https://forum.xda-developers.com/one...7/post80618153
Oneplus 7T Indian Variant
Stock: https://drive.google.com/file/d/1-nogyMXx0f5AGWgHZ5hVXklhmsenQ8C6/view?usp=drivesdk
Patched: OOS 10.0.3 & 10.0.4
https://drive.google.com/open?id=100...veaALHsJIlZRRn
Click to expand...
Click to collapse
Updated OP with all the links mentioned by different users. Thanks a lot!

I had to patch my own boot image using payload dumper. I'm more interested which file in /dev/block is needed for a system dump

boot.img patching process?
blackknightavalon said:
I had to patch my own boot image using payload dumper. I'm more interested which file in /dev/block is needed for a system dump
Click to expand...
Click to collapse
Would it be possible to get a process to do this? I would be a lot happier doing this myself where I can examine what is being done rather than having to install patched boot images...

rhardy said:
Would it be possible to get a process to do this? I would be a lot happier doing this myself where I can examine what is being done rather than having to install patched boot images...
Click to expand...
Click to collapse
Just Google it. It'll be the very first link in the results and it's on AFH

Seems like the US link is dead

The stable version of magisk works on op7t?

Can you Convert CN Version Phone to Global Version via flashing rom?

i just broke my Asus Rog 2 wondering if i buy CN Version if i can flash Global rom like we could with ASUS ROG 2... or anyone with phone should i skip and buy ASUS ROG 3 which is coming out shortly.
I understand NFC not in CN Version

hashcheck said:
i just broke my Asus Rog 2 wondering if i buy CN Version if i can flash Global rom like we could with ASUS ROG 2... or anyone with phone should i skip and buy ASUS ROG 3 which is coming out shortly.
I understand NFC not in CN Version
Click to expand...
Click to collapse
yes！

johnny886 said:
yes！
Click to expand...
Click to collapse
So just download latest update and put in root of storage?
As with ROG2 had to change vendor fingerprint via root first just want to check i can flash straight to Global with out all the bricking that is happening. aso do you find it a good build quality?

hashcheck said:
So just download latest update and put in root of storage?
As with ROG2 had to change vendor fingerprint via root first just want to check i can flash straight to Global with out all the bricking that is happening. aso do you find it a good build quality?
Click to expand...
Click to collapse
https://forum.xda-developers.com/nu.../unbrick-tool-nubia-red-magic-5gmade-t4127957

I have a Chinese Device.
I just downloaded the Global ROM and installed via system update.
All working well.

samussamus1 said:
I have a Chinese Device.
I just downloaded the Global ROM and installed via system update.
All working well.
Click to expand...
Click to collapse
Hello samus,
where do I download the Global Rom?
Thanks in Advance!

samussamus1 said:
I have a Chinese Device.
I just downloaded the Global ROM and installed via system update.
All working well.
Click to expand...
Click to collapse
Are you sure its so simple? Did you unlock bootloader?

tott2003 said:
Are you sure its so simple? Did you unlock bootloader?
Click to expand...
Click to collapse
Hi Tott
Yes it really is this simple, I'll share the latest link for 4.13 below.
Be warned: The download speed is very slow today as this is a brand new release and everyone is downloading at once.
http://rom.download.nubia.com/Europe/NX659J/V413/NX659J-update.zip
Also, no, bootloader does NOT have to be unlocked.
-
Sam

samussamus1 said:
Hi Tott
Yes it really is this simple, I'll share the latest link for 4.13 below.
Be warned: The download speed is very slow today as this is a brand new release and everyone is downloading at once.
http://rom.download.nubia.com/Europe/NX659J/V413/NX659J-update.zip
Also, no, bootloader does NOT have to be unlocked.
-
Sam
Click to expand...
Click to collapse
Hi Sir Sam,
Is there any special technique for me to successfully flash Global ROM in my RM5G CN ROM? Tried this version as well but I'm stuck in 25% and an error message keeps popping up saying that the installation was aborted (something like that). Is there any setting I have to turn on or off for this to work?
I'm currently on CNCommon_v6.23
TIA

cavjr08 said:
Hi Sir Sam,
Is there any special technique for me to successfully flash Global ROM in my RM5G CN ROM? Tried this version as well but I'm stuck in 25% and an error message keeps popping up saying that the installation was aborted (something like that). Is there any setting I have to turn on or off for this to work?
I'm currently on CNCommon_v6.23
TIA
Click to expand...
Click to collapse
The reason its failing is because you have a later version of the rom already.
6.23 is more up to date than 4.13
If you wish to change to a lower rom you would need to flash via the recovery menu.
If it still fails, you can use the fastboot bypass method to install TWRP and flash from there instead.
If you use the bypass method you dont unlock you bootloader. And flashing the official rom via twrp will overwrite twrp after a successful flash. Making it stock once more.

Patrick Morgan said:
The reason its failing is because you have a later version of the rom already.
6.23 is more up to date than 4.13
If you wish to change to a lower rom you would need to flash via the recovery menu.
If it still fails, you can use the fastboot bypass method to install TWRP and flash from there instead.
If you use the bypass method you dont unlock you bootloader. And flashing the official rom via twrp will overwrite twrp after a successful flash. Making it stock once more.
Click to expand...
Click to collapse
Thanks for the information Sir, I was able to flash the NON-EU v.3.12 via UnbrickTool from Sir @JerryLin last night, and now I feel very blessed! :laugh:
Thanks!

hashcheck said:
i just broke my Asus Rog 2 wondering if i buy CN Version if i can flash Global rom like we could with ASUS ROG 2... or anyone with phone should i skip and buy ASUS ROG 3 which is coming out shortly.
I understand NFC not in CN Version
Click to expand...
Click to collapse
Why u discuss Rog 2 in this section, this is for Radmagic 5G
Go to Rog 2 questions and answer and ASK tks!

General OOS 11.2.3.3 Rolling Out (3rd Update Already)

OxygenOS 11.2.3.3 rolls out for OnePlus 9/9 Pro w/ battery, camera boosts
OxygenOS 11.2.3.3 is already the second update rolling out for the recently released OnePlus 9 and 9 Pro to improve the camera and battery.
9to5google.com

That's fast! I need to keep up for a change...

Hi, has anyone been able to test this update?

Hypnoz69 said:
Hi, has anyone been able to test this update?
Click to expand...
Click to collapse
Rolling out to India first so maybe some fellow Indian OnePlus owners may give their observations. Otherwise, we will have to wait for further rollout.

Hi,
I'd like to know, how to update with Magisk patched img ?
I have to flash only the new patched img via Magisk ?

xTen said:
Hi,
I'd like to know, how to update with Magisk patched img ?
I have to flash only the new patched img via Magisk ?
Click to expand...
Click to collapse
I have this installed on my North American version of OnePlus 9 Pro (2125), works perfectly. I have a patched magisk boot image if anybody wants it. I used payload number to get it.

bulletbling said:
Rolling out to India first so maybe some fellow Indian OnePlus owners may give their observations. Otherwise, we will have to wait for further rollout.
Click to expand...
Click to collapse
I couldnt find any change. Phone is still heating in doing normal work. Battery is still draining fast. Had to turn off 120hz and AOD. Not expected from such an expensive phone.
Call quality is good and network reception is also good. Camera quality is hit or miss. Gcam is giving better result.

Burt Squirtz said:
I have this installed on my North American version of OnePlus 9 Pro (2125), works perfectly. I have a patched magisk boot image if anybody wants it. I used payload number to get it.
Click to expand...
Click to collapse
I would like it. Is the version anywhere to be found other than through the phone's system updates? I flashed the EU version and would like to get back th the NA version

I'll upload later on today, at work now

Burt Squirtz said:
I'll upload later on today, at work now
Click to expand...
Click to collapse
Thanks, do you have the whole firmware or just the patched magisk boot image?

Firmware is super easy to grab off OnePlus updater app.
and then all you need is payload dumper and the newest python, and you can extract the boot image anytime you want.

Burt Squirtz said:
Firmware is super easy to grab off OnePlus updater app.
and then all you need is payload dumper and the newest python, and you can extract the boot image anytime you want.
Click to expand...
Click to collapse
you mean oxygen updater? I have that and it doesn't show me any updates

Burt Squirtz said:
I have this installed on my North American version of OnePlus 9 Pro (2125), works perfectly. I have a patched magisk boot image if anybody wants it. I used payload number to get it.
Click to expand...
Click to collapse
Hi,
Thanks, how could I update without lost my root ? Should I update via Magisk ?

Burt Squirtz said:
Firmware is super easy to grab off OnePlus updater app.
and then all you need is payload dumper and the newest python, and you can extract the boot image anytime you want.
Click to expand...
Click to collapse
How to extract it ? Could u tell us steps ?

xTen said:
How to extract it ? Could u tell us steps ?
Click to expand...
Click to collapse
Here's a video that explains:

nickporwal said:
I couldnt find any change. Phone is still heating in doing normal work. Battery is still draining fast. Had to turn off 120hz and AOD. Not expected from such an expensive phone.
Call quality is good and network reception is also good. Camera quality is hit or miss. Gcam is giving better result.
Click to expand...
Click to collapse
My battery life is excellent. Of course I have it rooted and naptime forced doze app installed and Google Cloud Messaging (GCM) doze enabled. I'm getting 9 hours average SOT and 0.6-0.8% per hour idle discharge. That is excellent.

XDA says files are too large - soI had to zip both of them up. Make sure to unzip before you flash. Hopefully they uploaded right.

vibrantliker said:
you mean oxygen updater? I have that and it doesn't show me any updates
Click to expand...
Click to collapse
In settings, change your device to EU 9 Pro or Indian 9 Pro. They work perfectly on a North American 9 Pro.

Burt Squirtz said:
XDA says files are too large - soI had to zip both of them up. Make sure to unzip before you flash. Hopefully they uploaded right.
Click to expand...
Click to collapse
would happen to have the whole firmware file?

Burt Squirtz said:
In settings, change your device to EU 9 Pro or Indian 9 Pro. They work perfectly on a North American 9 Pro.
Click to expand...
Click to collapse
I did already install the EU version on my phone but want to get back to the AA version. It's just nowhere to be found that I can download and install

Question OxygenOS 12

hello, I am in LE2123_11_C.38 version and I have download the Europe version incrementing OnePlus 9 pro C39 but when I want to install it the (software update system.apk) does not see it. Is there an incompatibility or am I mishandling? in anticipation, best regards.

ambares said:
hello, I am in LE2123_11_C.38 version and I have download the Europe version incrementing OnePlus 9 pro C39 but when I want to install it the (software update system.apk) does not see it. Is there an incompatibility or am I mishandling? in anticipation, best regards.
Click to expand...
Click to collapse
Hi! Where did u download it?

Download directly on the phone.
Then move the zip in storage.
Rename it if it have a long name.. Something short, like Oos.12.C.39.

Thanks for your answer but this change doesn't work for me. I have the feeling that it only works with Oos 12 C 36!

ambares said:
Thanks for your answer but this change doesn't work for me. I have the feeling that it only works with Oos 12 C 36!
Click to expand...
Click to collapse
It doesnt work with incrementals. Only full ota zip.

ambares said:
Thanks for your answer but this change doesn't work for me. I have the feeling that it only works with Oos 12 C 36!
Click to expand...
Click to collapse
It should work with any compatible update, full or incremental. I didn't have to rename mine. Is it at the root of your sdcard?
If local update doesn't work, can you just update to the OTA using system update?

ok
is there a method to install it or a software solution?

terlynn4 said:
It should work with any compatible update, full or incremental. I didn't have to rename mine. Is it at the root of your sdcard?
If local update doesn't work, can you just update to the OTA using system update?
Click to expand...
Click to collapse
Theres no Europe C39 yet. So he probably meant the Global C39. And you need full OTA for that.

ambares said:
ok
is there a method to install it or a software solution?
Click to expand...
Click to collapse
Install System Upgrade apk file from One plus A 12 Beta 1 thread. Download full ota zip from Oxygenos Updater. Move it to Internal storage and rename to remove .jar in the end. Open System Upgrade and update.

Thank you for your answers. I wish you happy Christmas holidays.

Ninxha said:
Theres no Europe C39 yet. So he probably meant the Global C39. And you need full OTA for that.
Click to expand...
Click to collapse
Oh that makes sense, I wasn't aware there was no EU C39. However, Global C39 is only incremental and the last global full update was C36. There might not be an easy way to switch (without downgrading) until the next global full update is released.